www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013
Information Dear Customer, This catalog gives you an important selection of the most frequently used accessories from Ringler. We are holding an extensive application-specific accessories assortment of the product lines in stock. RI Ringler Industrial vacuum cleaners RA Ringler exhaust units RE Ringler dust removers Please contact us. Our application technicians and project engineers are available to advise you. By the way: Ringler is a partner, who supplies everything from one source: Advice service, projecting, product manufacture, assembly, customer services and other services. 2 www.ringler-gmbh.de
Hoses / Technical Data 1 2 3 4 5 6 7 Ringler Suction hose type A» PVC-Light-weight hose with fabric lining and wire spiral, electrically conductive» Application: dust, fine, light suction material» Diameter: ND 40, ND 50, ND 70» Bending radii: 40 mm, 50 mm, 80 mm» Temperature range: 0 C + 85 C» Colour: black» Further sizes on request Ringler Suction hose type B» Flexible steel hose with PU-jacket, electrically conductive» Application: steel swarf, granules, liquids» Diameter: ND 40» Bending radius: 160 mm» Temperature range: -20 C + 110 C» Colour: black Ringler Suction hose type C / C-V2A (stainless steel hose)» Flexible steel hose with Perbunan-C jacket, electrically conductive» Application: steel swarf, granules, liquids» Diameter: ND 50, ND 70» Bending radii: 180 mm, 360 mm» Temperature range: -20 C + 110 C» Colour: black Ringler Suction hose D» PU-hose with covered wire spiral, smooth inside, extremely wear-resistant, oil and weather-proof, electrically conductive» Application: oil, solvents, tri, fine swarf, liquids» Diameter: ND 40, ND 50, ND 70» Bending radii: 50 mm, 70 mm, 100 mm» Temperature range: -20 C + 80 C» Colour: translucent» Further sizes on request Ringler Suction hose type E» Rubber hose with covered wire spiral, smooth inside, highly wear-resistant, electrically conductive, oil-resistant» Application: liquids, granules, dust, fine swarf» Diameter: ND 50, ND 70» Bending radii: 70 mm, 100 mm» Temperature range: -20 C + 80 C» Colour: black Ringler Suction hose type F as» PU-hose with covered wire spiral, smooth inside, electrically conductive 10 9 Ohm, suitable for ex-class zone 1» Application: dust» Diameter: ND 40, ND 50» Bending radius: 50 mm» Temperature range: -10 C + 60 C» Colour: black Ringler Suction hose type G» Flexible steel hose PU-jacket, electrically conductive, microbe-resistant, hydrolysis-resistant» Application: swarf, granules, liquids» Diameter: ND 50» Bending radius: 180 mm» Temperature range: -20 C + 110 C» Colour: black Accessories 3
Ready-made hoses / ND 40 ND 50 ND 70 8 Replacement hoses type A (without connectors) (max. 15 m) ND 40 3 m 160 0130 5 m 160 0131 piece goods 060 0192 ND 50 3 m 160 0118 5 m 160 0119 piece goods 060 0193 ND 70 3 m 160 0440 5 m 160 0441 piece goods 060 0319 Replacement hoses type B (without connectors) (max. 25 m) ND 40 3 m 160 0133 5 m 160 0134 piece goods 060 0194 Replacement hoses type C (without connectors) ND 50 3 m 160 0109 3 m type C-V2A 160 0109-B1 5 m 160 0110 ND 70 3 m 160 0124 5 m 160 0125 Replacement hoses type D (without connectors) (max. 15 m) ND 40 3 m 060 0383 5 m 060 0384 piece goods 060 0320 light 060 0321 ND 50 3 m 160 0112 5 m 160 0113 piece goods 060 0198 light 060 0322 ND 70 3 m 160 0260 5 m 160 0261 piece goods 060 0199 light 060 0323 Replacement hoses type E (without connectors) ND 50 3 m 160 0474 5 m 160 0258 ND 70 5 m 160 0128 Replacement hoses type F as (without connectors) (max. 15 m) ND 40 piece goods 060 0467 ND 50 3 m 060 0454 5 m 060 0455 piece goods 060 0468 Replacement hoses type G (without connectors) (max. 25 m) ND 50 3 m 060 0281 5 m 060 0282 piece goods 060 0365 4 www.ringler-gmbh.de
Extension hoses / ND 40 ND 50 ND 70 9 Extension hoses type A with inner and outer connection cone ND 40 3 m 260 0458 5 m 260 0459 ND 50 3 m 260 0414 5 m 260 0415 ND 70 3 m 260 0438 5 m 260 0439 Extension hoses type B with inner and outer connection cone ND 40 3 m 260 0460 5 m 260 0461 Extension hoses type C with inner and outer connection cone ND 50 3 m 260 0177 5 m 260 0178 ND 70 3 m 260 0186 5 m 260 0187 Extension hoses type D with inner and outer connection cone ND 40 3 m 260 0462 5 m 260 0463 ND 50 3 m 260 0416 5 m 260 0417 ND 70 3 m 260 0269 5 m 260 0270 Extension hoses type E with inner and outer connection cone ND 50 3 m 260 0478 5 m 260 0419 ND 70 5 m 260 0190 Extension hoses type G with inner and outer connection cone ND 50 3 m 260 0420 5 m 260 0421 Accessories 5
Ready-made hoses / ND 40 ND 50 ND 70 10 Suction hose unit type A with connection elbow 115 and handle 45 Suction hose unit type B with connection elbow 115 and handle 45 Suction hose unit type C with connection elbow 115 and handle 45 *) for B1 and Ex-Area Suction hose unit type D with connection elbow 115 and handle 45 Suction hose unit type F as with connection elbow 115 and handle 45 Suction hose unit type G with connection elbow 115 and handle 45 ND 40 3 m 260 0484 5 m 260 0485 ND 50 3 m 260 0398 5 m 260 0399 ND 70 3 m 260 0492 5 m 260 0493 ND 40 3 m 260 0488 5 m 260 0489 ND 50 3 m 260 0107 3 m type C-V2A 260 0107-B1*) 5 m 260 0154 ND 70 3 m 260 0494 5 m 260 0495 ND 40 3 m 260 0486 5 m 260 0487 ND 50 3 m 260 0400 5 m 260 0401 ND 70 3 m 260 0496 5 m 260 0497 ND 50 3 m 260 0456 5 m 260 0457 ND 50 3 m 260 0404 5 m 260 0405 11 Suction hoses type A for pipeline connection, with inner connection cone and handle 45 Suction hoses type D for pipeline connection, with inner connection cone and handle 45 Suction hoses type E for pipeline connection, with inner connection cone and handle 45 Suction hoses type G for pipeline connection, with inner connection cone and handle 45 ND 40 3 m 260 0511 5 m 260 0512 ND 50 3 m 260 0422 5 m 260 0423 ND 70 3 m 260 0513 5 m 260 0514 ND 40 3 m 260 0515 5 m 260 0516 ND 50 3 m 260 0424 5 m 260 0425 ND 70 3 m 260 0517 5 m 260 0518 ND 50 3 m 260 0426 5 m 260 0427 ND 70 5 m 260 0519 ND 50 3 m 260 0428 5 m 260 0429 6 www.ringler-gmbh.de
Nozzle programme / ND 40 ND 50 ND 70 12 Elastic nozzle ND 40 161 0115 ND 50 161 0116 ND 70 161 0117 Aluminium inclined nozzle anodized ND 40 061 0113 ND 50 061 0114 13 14 Groove nozzle from steel sheet - slot width 17 mm galvanised - slot width 25 mm galvanised - slot width 30 mm galvanised Wide nozzle from cast aluminium nozzle width 150 mm ND 50 161 0464 ND 50 161 0837 ND 70 161 0477 ND 40 161 0111 ND 50 161 0112 15 Bypass nozzle total length 1000 mm ND 50 161 0130 16 Long shaft groove nozzle slot width 13 mm ND 40 161 0125 ND 50 161 0126 17 18 Flexible nozzle with rubber mouthpiece Flexible groove nozzle 13 mm slot width 13 mm galvanized ND 40 161 0118 ND 50 161 0119 ND 70 161 0120 ND 40 161 0121 ND 50 161 0123 19 Flexible groove nozzle 20 mm slot width 20 mm galvanized ND 40 161 0122 ND 50 161 0124 20 Flexible angle nozzle 800 mm length 800 mm ND 40 161 0132 ND 50 161 0134 21 22 Long shaft round nozzle black rubber, length 315 mm, suction cross section from 10 30 mm; possible by cutting off ND 40 161 0465 ND 50 161 0466 Accessories 7
Nozzle programme / ND 40 ND 50 ND 70 Brush nozzle 120 mm ND 40 161 0457 23 24 25 Replacement brush strip for brush nozzle Suction brush connection 45 inclination, with plastic brushes inclined slightly outwards, 2 rows Flat brush nozzle 061 0334 ND 40 261 0201 ND 50 261 0139 ND 40 161 0135 ND 50 161 0136 26 27 28 Tube suction brush for tube diameters up to 100 mm for tube diameters up to 200 mm Extension tube fits all nozzles and floor nozzles ND 40 161 0141 ND 40 161 0142 750 mm ND 40 261 0456 850 mm ND 50 261 0150 750 mm ND 70 261 0151 Floor nozzle suction width 200 mm ND 50 161 0128 29 30 31 Set rubber strips with plastic strip for floor nozzle 200 mm Floor nozzle 370 mm with rotary joint and height-adjustable rollers Floor nozzle 500 mm with rotary joint and height-adjustable rollers 261 0434 ND 40 261 0106 ND 50 261 0108 ND 50 261 0109 32 33 Set rubber lips oil-resistant with profile strip for floor nozzle 370 mm with profile strip for floor nozzle 500 mm 261 0181 261 0182 8 www.ringler-gmbh.de
Nozzle programme / ND 40 ND 50 ND 70 34 Set brush strip with profile strip for floor nozzle 370 mm with profile strip for floor nozzle 500 mm Suction broom, suction width 300 mm connection 45 inclined with horsehair 061 0422 061 0420 ND 40 261 0152 ND 50 261 0153 35 36 37 Mounting set floor nozzle, suction width 800 mm with 2 suction outlets ND 40 and distributor ND 50 with height-adjustable floor nozzle, for device type RI 131 Mounting set floor nozzle, suction width 800 mm with 2 suction outlets ND 40 and distributor ND 50 with height-adjustable floor nozzle, for device type RI 331 Suction and blow nozzle simultaneous blowing out and sucking, e.g. of blind holes 261 0603 261 0154 ND 40 261 0468 38 Suction and blow nozzle angle design ND 40 261 0461 39 Suction and blow nozzle straight design ND 40 261 0462 40 Suction and blow nozzle suction and blow nozzle 90, angle design, for simultaneous sucking and blowing out of deep-hole bores, lance stroke 200 mm ND 40 261 0564 41 Nozzle quiver without sensor for wall assembly for elastic nozzle for the 163 0232 following nozzles 42 Accessories 9
Various Nozzle quiver with sensor for wall assembly for elastic nozzle for the 263 0319 following nozzles 43 Elastic nozzle for nozzle quiver ND 40 161 0641 ND 50 161 0642 44 Brush nozzle for nozzle quiver ND 40 161 0218 45 46 47 Impact plate made of plastic fits Ringler-container with system ø 517 mm Impact plate made of plastic fits RI 030 with system ø 420 mm Draining board sieve from stainless steel from 1.5 mm perforated sheet, with spacer Draining sieve basket from 1.5 mm perforated sheet all stainless steel, volume 40 l, with handles, fits Ringler-container with system ø 517 mm 070 1021 070 1024 170 0169 070 0167 48 49 50 Draining sieve basket from 1.5 mm perforated sheet all stainless steel, volume 20 l, for system diameter 420 mm (RI 030) Fine fleece filter bag with clamping ring for 40 l sieve basket, material: polyester Float insert for Ringler-standard container overflow controller with float balls, suction centric, only for AC-drive of the device types RI 80 / 100 / 300, all stainless steel for RI 030 Electrical overflow control (AC) as refit set with holder, for control and float switch 070 0183 135 0291 270 0178 270 1001 063 0180 51 Electrical overflow control (3-phase current) as refit set with holder, for control and float switch 263 0222 10 www.ringler-gmbh.de
Various Barrel pump with standpipe on collection tank hose 1, quick-release coupling Barrel pump with pump pie set hose 1, quick-release coupling 263 0211 240 0332 52 Standpipe in normal steel for barrel pump, to weld into collection tank Standpipe in stainless steel for barrel pump, to weld into V2A collection tank Barrel filling device ND 50 with inner and outer cone 063 0104 063 0143 263 0111 53 54 55 Pre-cleaner for Ringler-container ø 570 mm with inner and outer cone, also with float as overflow control Pre-cleaner lid for standard barrel 200 l with inner and outer cone, also with float as overflow control Standard barrel 200 l, lacquered inner diameter 570 mm, height 870 mm ND 50 232 0108 ND 70 232 0110 ND 50 232 0109 ND 70 232 0111 ND 50 232 0104 ND 70 232 0106 ND 50 232 0105 ND 70 232 0107 010 0229 56 Pre-cleaner 125 l with lid, with or without float ball as overflow control, filling level indication drain hose, can be moved and tilted, fork lift transportation, for liquids and swarf 332 0225 57 Pre-cleaner 110 l with lid, crane eyes, movable, fork lift transportation, emptying via flap, for bulk cargo, sand, cast iron, etc. 332 0236 58 Accessories 11
Various 59 Cyclone pre-separator with tank ø 517 mm, 100 l for approx. 210 m³ / h for approx. 490 m³ / h for approx. 900 m³ / h for approx. 1.500 m³ / h for approx. 2.800 m³ / h for approx. 3.500 m³ / h Crane yoke with spring hook for all collecting containers and carriers with crane yokes, maximum load 400 kg ND 200 332 1011 ND 300 332 1008 ND 400 332 1000 ND 500 332 1010 ND 600 332 1012 ND 700 332 1013 063 0273 60 61 Emptying aid by means of hand crank gear on RI 300 retrofit kit to screw onto running gear or collection tank type RI 300 Cable reel (AC) heavy-duty design for industrial vacuum cleaners, with 25 m VDE-cable, slip ring, plug and socket 363 1001 263 0110 62 Locking valve manually operated both sides for pipe connection ø 60 mm both sides for pipe connection ø 75 mm ND 50 262 0105 ND 70 262 0102 63 64 Locking valve manually operated with limit switch both sides for pipe connection ø 60 mm both sides for pipe connection ø 75 mm Locking valve electro-pneumatically operated both sides for pipe connection ø 60 mm both sides for pipe connection ø 75 mm ND 50 262 0106 ND 70 262 0103 ND 50 262 0107 ND 70 262 0104 65 66 Double valve (tube switch) manually operated with tube coupling 80 mm diameter for connection to suction devices with sideways suction nozzles ND 70, 2x ø 80 mm with adapter sleeve 048 0276 362 0306 12 www.ringler-gmbh.de
Connectors, cones, reducers Double valve electro-pneumatically operated 2x ø 60 mm to ø 60 mm 262 0175 67 Double valve electro-pneumatically operated 2x ø 80 mm to ø 80 mm 262 0178 68 ISO 1 distributing valve and customised pneumatic parts, surcharge 092 0064 69 70 Handle 45 with hose connection nozzle and inner cone with pivot joint Hose connector with inner cone ND 40 149 0148 ND 50 049 0099 ND 50 149 0130 ND 40 148 0444 ND 50 048 0358 ND 70 148 0446 71 72 73 74 75 with inner cone and hook Hose connector with outer cone Reducer outer / inner cone Reducer inner / outer cone Reducer outer cone ND 70 / 50 to hose connection ND 50 / 40 Adapter cylindrical outer cone to cylindrical ND 40 148 1211 ND 50 148 1212 ND 70 148 0448 ND 40 148 0445 ND 50 048 0359 ND 70 148 0447 ND 50 / 40 261 0146 ND 70 / 50 261 0144 ND 50 / 40 261 0629 ND 70 / 50 261 0299 ND 50 / 40 261 0483 ND 70 / 50 261 0484 ND 50 /ø 58 mm 049 0097 ND 70 /ø 60 mm 049 0161 76 77 Assembly set for hose connection consisting of: 2 hose sleeves 2 hose bands ND 40 205 0049 ND 50 205 0039 ND 70 205 0048 Accessories 13
Connectors, cones, reducers 78 79 Shrink hose connector 120 mm long, with adhesive Reducing bush for connection of suction hoses ND 50 to suction devices with suction nozzle ø 80 mm on the side Insertion elbow 115 with hose connection nozzle and fork for hose suspension, axially rotatable ND 40 060 0393 ND 50 060 0318 ND 70 060 0326 ND 70 / 50 048 0276 ND 40 049 0149 ND 50 049 0098 80 Insertion elbow 90 with inner cone, fits extension hose, axially rotatable ND 70 149 0040 81 Insertion distributing elbow 90 ND 70 to 2x inner cone ND 50 ND 70 149 0102 82 Breeches pipe 60 outer cone ND 70 to 2x inner cone ND 50 outer cone ND 50 to 2x inner cone ND 40 ND 70 / 50 148 0467 ND 50 / 40 148 0468 83 Elbow 90 outer cone ND 70, inner cone ND 50 ND 70 / 50 149 0105 84 Connector straight rotatable by 360, with inner cone ND 50 149 0146 ND 70 149 0147 85 14 www.ringler-gmbh.de
Bags, containers, filters, suction arms 86 87 88 89 90 91 Circular bottom bag from PE 30 litres for collecting container 30 litres, system-ø420mm Holddown for 30 litres, system-ø420mm Circular bottom bag from PE 50 litres for collecting container 50 litres Holddown for 50 litres Circular bottom bag from PE 100 litres for collecting container 100 litres Holddown for 100 litres Area filter, filter category L to EN 60335-2-69, appendix AA 063 1021 025 1071 063 0106 025 0208 063 0107 025 0209 035 0106 Area filter, filter category L as antistatic to EN 60335-2-69, appendix AA 035 0107 92 Area filter, filter category L for RI 030 to EN 60335-2-69, appendix AA Suction arm approximately 2.5 m total length, suction funnel DIA 150 mm 035 0300 ND 70 261 0296 ND 100 261 0296-01 93 Accessories 15
Pipework systems 94 Prec. steel pipe, lacquered price per metre Pipe bend St-52, lacquered hardened through liquid nitriding 30 45 60 ø 42,4 x 2 mm 048 0134 ø 60 x 2 mm 048 0135 ø 75 x 2 mm 048 0136 ø 100 x 2 mm 048 0138 ø 42,4 x 2,6 mm 149 1008 ø 60,3 x 3,6 mm 049 0187 ø 76,1 x 3,6 mm 049 0188 ø 101,6 x 4 mm 049 0189 ø 42,4 x 2,6 mm 149 0134 ø 60,3 x 3,6 mm 049 0190 ø 76,1 x 3,6 mm 049 0191 ø 101,6 x 4 mm 049 0192 ø 42,4 x 2,6 mm 149 0178 ø 60,3 x 3,6 mm 049 0193 ø 76,1 x 3,6 mm 049 0194 ø 101,6 x 4 mm 049 0195 95 96 90 Pipe branch 30, version A, lacquered (all three connections have the same ø) ø 42,4 x 2,6 mm 049 0073 ø 60,3 x 3,6 mm 049 0196 ø 76,1 x 3,6 mm 049 0197 ø 101,6 x 4 mm 049 0198 ø 42,4 / 42,4 / 42,4 mm 148 1210 ø 60 / 60 / 60 mm 148 0146 ø 75 / 75 / 75 mm 148 0151 ø 100 / 100 / 100 mm 148 0158 ø 120 / 120 / 120 mm 148 0160 Pipe branch 30, version B, lacquered 97 98 99 (branch has the smaller ø) Breeches pipe 60 Reducer ø 60 / 60 / 42,4 mm 148 1209 ø 75 / 75 / 60 mm 148 0147 ø 100 / 100 / 75 mm 148 0153 ø 100 / 100 / 60 mm 148 0149 ø 120 / 120 / 100 mm 148 0159 ø 120 / 120 / 75 mm 148 0154 ø 60/ 42,4 / 42,4 mm 148 0161 ø 75 / 60 / 60 mm 148 0162 ø 80 / 60 / 60 mm 148 0163 ø 100 / 75 / 75 mm 148 0164 ø 120 / 100 / 100 mm 148 0165 ø 60 42,4 mm 148 1055 ø 75 60 mm 149 0173 ø 80 60 mm 048 0646 ø 80 75 mm 048 0647 ø 100 60 mm 149 0176 ø 100 75 mm 149 0174 ø 120 60 mm 149 0177 ø 120 100 mm 149 0175 16 www.ringler-gmbh.de
Pipework systems Connection piece pipe end ND 40 pipe ø 42,4 mm to inner cone 148 1206 outer cone 148 1207 100 101 102 ND 50 pipe ø 60 mm to ND 70 pipe ø 75 mm to Flap valve ND 50 flap valve with sensor for pipe ø 60 x 2 mm hose connection for flap valve Tube coupling galvanised ø 42,4 mm ø 60 mm ø 75 mm ø 80 mm ø 100 mm ø 120 mm Hose suspension with limit switch inner cone 148 0649 outer cone 149 0171 inner cone 148 0677 outer cone 148 0830 262 1027 262 1028 with 2 locking screws 048 1238 with 3 locking screws 048 0123 with 2 locking screws 048 0116 with 3 locking screws 048 0124 with 2 locking screws 048 0117 with 3 locking screws 048 0125 with 3 locking screws 048 0126 with 3 locking screws 048 0127 with 3 locking screws 048 0129 for wall assembly 263 0214 for pipe ø 60 mm 263 0131 for pipe ø 75 mm 263 0213 103 Swivel arm with wall fastening projection 2m with floor support 100x100 projection 2m ND 50 248 1022 ND 70 248 1016 ND 50 248 1045 ND 70 248 1043 104 Accessories 17
Pipework systems Pipe fastening clips 105 M8 connection thread M10 connection thread Pipe support for pipe fastening clip, pipe height approx. 2200 3500 variable ø 41 44 mm 048 0181 ø 60 63 mm 048 0182 ø 74 78 mm 048 0183 ø 99 103 mm 048 0184 ø 116 120 mm 048 0185 148 0131 106 18 www.ringler-gmbh.de
Overview of Pipework systems Accessories 19
Pipework systems Pipework system type 1 for RI and RA-exhaust unit C B A: Pipework segments, manufactured to measure and lacquered, from 2 mm precision steel pipe, elbows reinforced, if needed or larger radii B: Pipe couplings, galvanised, with rubber seals C: Pipe fastening clips with rubber insert A The exact price of the pipework will determined only after installation. The calculation criteria are: - Pipework length and its diameter - Kind and number of the installed fittings and locking valves - Number of used pipe couplings, fastening clips and brackets. Cost settlement according to our price list. 107 Pipework system type 2 for RE exhaust unit B A: Pipework segments, with flange from 1 mm or 2 mm steel sheet, lacquered, electrically conductive B: Pipe clamping rings, galvanised, complete with lap flange seals C: Pipe fastening clips with rubber insert A The exact price of the pipework will determined only after installation. The calculation criteria are: - Pipework length and its diameter - Kind and number of the installed fittings and locking valves - Number of used pipe couplings, fastening clips and brackets. Cost settlement according to our price list. C 108 20 www.ringler-gmbh.de
Overview of Hose and Nozzle Range Accessories 21
Overview of hose and nozzle range RI Suction devices W2G / W2E Suction hose unit ND 40 / ND 50 length 3 m / 5 m Extension hose ND 40 / ND 50 length 3 m / 5 m 10 9 51 52 62 47 48 50 Suction hose unit ND 50 length 3 m / 5 m 10 RI / RA Suction devices 79 79 Insertion bush ND 70 / ND 50 Insertion distribution elbow ND 70 to 2 x ND 50 with extension hose ND 50 length 3 m / 5 m 66 Double valve ND 70 to 2 x ND 70 82 9 9 51 86 / 87 / 88 / 89 / 90 / 91 93 Suction arm approximately 2.5m with suction funnel ø 150 mm 81 9 Pipework systems Assembly set floor nozzle 800 mm Suction width 37 95 102 65 11 100 Suction hose unit ND 50 length 3 m / 5 m for connection to pipework system 22 www.ringler-gmbh.de
Overview of hose and nozzle range Extension hose ND 50 / ND 70 length 3 m / 5 m 12 Elastic nozzle 9 9 70 18 Flexible nozzle 55 Pre-cleaner lids of different designs for RINGLER-collection containers or 200 l barrel 19 21 Flexible groove nozzle Flexible angle nozzle 56 17 Long shaft groove nozzle 70 Aluminium- Inclined nozzle 13 15 Wide nozzle 70 53 Groove nozzle from steel sheet 14 35 Suction broom Long shaft round nozzle 22 25 Suction brush 73 Brush nozzle 23 26 Flat brush nozzle Tube suction brush 27 16 Bypass nozzle Pre-cleaner 125 litres 54 Crane yoke with spring hook 38 57 alternatively 58 or 59 60 28 Extension tube (fits all nozzles) 29 31 / 32 Floor nozzle with joint - Suction width 370 mm - Suction width 500 mm Floor nozzle suction width 200 mm Accessories 23
ww.ringler-gmbh.de» industrial suction unit» mobile swarf and coolant vac s» industrial vacuum cleaner» safety vacuum cleaners» mobile dust filtering devices» dust collection units» machinery integrated vac s» stationary industrial suction units» stationary suction systems» pneumatic conveying systems» pre-separators» pipework systems B. Ringler Apparatebau GmbH Robert-Bosch-Straße 6 8 73550 Waldstetten [Germany] Fon +49 [0] 7171 94 888-0 Fax +49 [0] 7171 94 888-28 info@ringler.kaercher.com www.ringler-gmbh.de General Air Technology Cleaning Systems 01.2013 www.hela.com RIN_2013_003 en remains property of Co. Ringler copyright Co. Ringler