FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 1 Belly Cruzer DSLR Steady Camera Rig FC-BC-DSR-P I N S T R U C T I O N M A N U A L All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the publisher.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 2 I N T R O D U C T I O N Our FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR) meets and exceeds the requirement of DSLR users by providing professional look production value at an affordable price. I N T H E B O X Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below. Front handle rod Cage Base with Quick Release Cage top plate Accessories 2 x 300mm Male threaded Rods Front handle bracket Shoulder Pad Handle bracket 4 x 300mm Female threaded Rods Top Handle SR-33A Adapter 4x 150mm Female threaded Rods 1 x Handle Set 4x 100mm Male threaded Rods Belly Front handle bracket clamps Clamps For Handle Set Straight & Z-bracket Hot Shoe Matte Box MB-600 French and Side Flags Accessory mounting Adapter Battery Mounting Plate
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 3 A S S E M B LIN G YO U R B E L LY C R U Z E R - D S L R C A M E R A R I G Insert the french flag in to the matte box and tighten the screws. Using the same approach, insert the side flags into the (big) slots provided in the hinges and secure with the screws. Note: If the french flag( top) remains loose even after tightening the knob you have to slightly tighten the allen bolt as shown in the image. Insert the filter holders to your matte box as shown below. Note: For better gripping of filter in filter holder, retighten the filter tray knob to secure the filter properly. Attach knicker on conversion ring, then screw in the conversion ring on ring holder and tighten the screw to secure as shown.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 4 A S S E M B LIN G YO U R F C - BC- D S R R I G Insert the 300mm female threaded rod into the camera base and tighten with allen key. Attach the quick release adapter base with the quick release plate of your tripod and tighten the bolt to secure properly. Attach the camera with quick release plate and tighten the bolt to secure properly.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 5 Now loosen the knob and press the pin to release the quick release plate. Attach the camera with quick release plate and tighten the bolt to secure properly. Now mount the camera onto the base plate and tighten the knob to secure it. Attach the rods on the cage base plate and tighten the knob to secure properly.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 6 Screw-in the 100mm male rods to extend the height of cage. Attach the accessory mounting bracket and tighten with the allen key. Attach the cage top plate and tighten with the knob. Now attach the matte box to the front of rods, align the knicker with the lense barrel.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 7 Attach the belly to the rods and tighten with the knob to secure it. Now Loosen the top plate with the help of allen key and insert the 300mm female rods. Attach the front handle bracket clamps with the bracket, attach it with the rods and secure it properly with the help of allen key. Note: The front handle bracket clamps are the ones with allen bolts.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 8 Now insert front handle rod into the front bracket and secure it properly with the help of allen key. Screw the handle into the handle clamp and insert the handle into the rod. Note: The front handle bracket clamps are the ones without allen bolts Now insert 300mm male threaded rods into 300mm female threaded rods.
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 9 Now attach the top handle and tighten the knob to secure it properly. Attach SR-33A adapter into the rods and tighten with knobs to secure it. Attach the shoulder pad into the rod and Insert battery plate and tighten with the knob to secure it. Yo u r F I L M C I T Y DSLR CAMERA SHOULDER MOUNT KIT A L L D R E S S E D U P A N D G O O D TO G O
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 10 WARRANTY We offer a limited time warranty for our products. For Mechanical products we provide a 6 month warranty & for electronic products we provide a 3 month warranty from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import duties are applied to the return, we will also charge these costs to the customer. The warranty does not include, by the way of example, damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged. Do not send the unit to us without first getting a response and getting the approval to send back the item. In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do our best to help you out. For any other assistance you can reach us via email.