DSLR Filmmaking Kit 6-CF INSTRUCTION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the publisher.
PROAIM DSLR FILM MAKING KIT 6-CF 2 I N T R O D U C T I O N Matching components to build a quality Kit saves shopping time, initial cost and most of all the components are designed to work in concert with each other. In keeping with new image capture technology our PROAIM DSLR FILMMAKING Kit 6-CF is a smart choice for today s shooters who demand flexibility and performance for all their digital media productions. I N T H E B O X Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below. Matte Box MB-600 French and Side Flags Cage brackets Shoulder pad Top Handle Counter weight 15mm adapter Handle Set 2x 300mm female rods Rod Support System weight brackets Mic-suspension 4x 200mm female rods Straight bracket Shim Set 2x 150mm male rods Accessories PRO Zoom X9 Follow Focus Speed Crank Gear Ring Belt Shoulder Rig Support Rod
PROAIM DSLR FILM MAKING KIT 6-CF 3 A S S E M B LIN G YO U R M B - 600 M AT T E BOX Insert the french flag in to the matte box and tighten the screws. Using the same approach, i n- sert the side flags into the (big) slots provided in the hinges and secure with the screws. Note: If the french flag (top) remains loose even after tightening the knob you have to slightly tighten the allen bolt as shown in the image. Insert the filter holders to your matte box as shown below. Note: For better gripping of filter in filter holder, retighten the filter tray knob to secure the filter properly.
PROAIM DSLR FILM MAKING KIT 6-CF 4 Attach knicker on conversion ring, then screw in the conversion ring on ring holder. A s s e m b l i n g Y o u r D S L R F i l m m a k i n g K i t 6 - CF Attach rod support system to your tripod plate and tighten with screw driver. Then mount the setup onto your tripod and secure with provided knob. Loosening the knob and simple push of provided button on quick release adapter allows you to remove quick release plate. Now attach it to camera base and tighten to secure.
PROAIM DSLR FILM MAKING KIT 6-CF 5 Slide in the camera setup onto quick release adapter, retighten the knob to ensure slip free connection. Now insert 2x 300mm female rods into quick release adapter. Now attach 2x 150mm extension rods to rails and tighten the knobs. Loosen the knob on cage bracket in order to insert it to 450mm rails. Using same approach insert another bracket to front of rails and tighten to secure.
PROAIM DSLR FILM MAKING KIT 6-CF 6 Loosen the knobs on top of cage brackets in order to insert 2x200mm rods into them, retighten to secure. Attach top handle to 200mm rods at cage top, retighten the knob to ensure slip free connection. Attach straight bracket to back of rail system and tighten the knob. Then insert 2x200mm rods into it and secure with provided knob.
PROAIM DSLR FILM MAKING KIT 6-CF 7 Now insert shoulder pad to 200mm rails, also attach counter weight and secure with provided knob. Attach flexible gear ring to your camera lens and tighten the screw. Now insert X9 follow focus to front of rail system, adjust follow focus with your camera and secure.
PROAIM DSLR FILM MAKING KIT 6-CF 8 You can also attach speed crank to follow focus as per your requirement. Now insert MB-600 matte box to front rails, align with lens and secure with the knob as shown below. Attach handle setup to front of rods and tighten the knobs to secure it.
PROAIM DSLR FILM MAKING KIT 6-CF 9 NOTE: You can tilt handle set as per your requirement by loosen the knob. Y O U R P R O A I M D S L R F I L M M A K I N G K I T 6 - CF A L L D R E S S E D U P A N D R E A D Y T O G O (SHOWN WITH OPTIONAL ACCESSORIES) Note: If you wish to use your setup with shoulder rig support rod then please use following sequence of text and pictures to assemble your kit. A S S E M B L I N G Y O U R S H O U L D E R R I G S U P P O R T R O D Wear your belt around your waist and secure with the help of velcro as shown below.
PROAIM DSLR FILM MAKING KIT 6-CF 10 Attach rod support to waist belt properly. You can adjust the height of your rod support with the help of provided knobs. Attach the rod support to your shoulder rig via 15mm rod adapter.this set up allows you to have fatigue free and long comfortable shoots. Y O U R D S L R F I L M M A K I N G K I T 6 - C F W I T H R O D S U P P O R T A L L D R E S S E D U P A N D R E A D Y T O G O (SHOWN WITH OPTIONAL ACCESSORIES)
PROAIM DSLR FILM MAKING KIT 6-CF 11 WARRANTY We offer a limited time warranty for our products. For mechanical products we provide a 6 month warranty & for electronic products we provide a 3 month warranty from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import duties are applied to the return, we will also charge these costs to the customer. The warranty does not include, by the way of example, damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged. Do not send the unit to us without first getting a response and getting the approval to send back the item. In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do our best to help you out. For any other assistance you can reach us via email.