1 Technical details 27 / 275 / 271 ompact design with integrated controller scanontrol 27/271 combines technology and performance in a single device, providing the dual benefits of an integrated controller and compact dimensions. Multiple scanner applications For many applications, it is necessary to measure or acquire data simultaneously using multiple sensors. With its combination of compact design, simple wiring and attractive price, scanontrol 27 / 271 is ideally suited to performing multi scanner applications. lternating laser toggle When using multiple sensors for a measuring task, it is sometimes necessary to work with overlapping laser lines. To rule out optical interference, the scanontrol 27 and 275 have a special synchronisation feature. This phase shift mode provides an alternating laser ON/OFF. The laser beam of one sensor is switched off for a fraction of a second while the other sensor performs measurements. This is done automatically and has no effect on the overall measurement frequency. Extended s for large targets Extended s are available for larger objects. Using software, the user can switch over from the standard range to the extended range. To document the s, each sensor is equipped with a calibration protocol. - z-axis up to 3mm - x-axis up to 148mm - Profile frequency up to 2,Hz - Measuring rate up to 1,28, points per second - z-axis reference resolution <4μm - Resolution x-axis up to 64 points scanontrol 27 The scanontrol 27 sensors are the most economic sensors for static and dynamic applications. The sensor provides a profile frequency of 1Hz and up to 64, measuring points per second. scanontrol 275 The scanontrol 275 sensors offer everything you need for advanced high speed 3D applications. Up to 1,28, points per second with a profile frequency of up to 2,Hz are possible using these sensors. scanontrol 271 The smart series scanontrol 271 offers a Plug & Play solution with integrated controller for simple measurement tasks. The sensor design is identical to the 27 and 275 series. Protective cover plate for harsh environments protective cover plate is available for harsh industrial environments. This plate can be equipped with a purge air system. The cover plate is attached to the sensor and has a protective window, through which the beam passes through.
75-626 75-531 75-55 75-6 11 ompact and HighSpeed: alibrated profile data The scanontrol 27 and 275 models are used for the transfer of calibrated profile data for external profile analysis, for example in a P. The sensor can be configured via a FireWire or Ethernet interface. The profile information is also transferred via this same interface. Details of the software interface can be found in the Integrating scanontrol in application software chapter. The programmable RS422 port can be used as a trigger or encoder input. scanontrol 27-25 scanontrol 275-25 scanontrol 27-5 scanontrol 275-5 scanontrol 27-1 scanontrol 275-1 Scope of delivery: Sensor, power supply cable 4.5m, RS422 connector, Demo-D, SDK, sensor protocol Power supply Profile transfer scanontrol 27: 64, measuring points per second scanontrol 275: 1,28, measuring points per second FireWire Ethernet Trigger Encoder SMRT: Profile analysis The SMRT series scanontrol 271 offers a Plug & Play solution within the integrated controller for simple measurement tasks such as step, angle, seam and groove inspection. The sensor is programmed via a P using the scanontrol onfiguration Tools. This setup is stored inside the integrated controller. The sensor can run in the standalone mode without a P. In addition to the measurement output via RS422, switch outputs and analogue measuring values are available via the external output unit. The RS422 can be programmed as a serial interface (measurement value output) or as a trigger input. scanontrol 271-25 scanontrol 271-5 scanontrol 271-1 Scope of delivery: Sensor, power supply cable 4.5m, RS422 connector, sensor protocol, software onfiguration Tools Power supply Setup Output Unit IEEE 94 PHY ISO SYN I/O 1 2 14 14 D D D 24V V + Ñ 14 1 14 D 2 D nalogue measurement valu 1 2 3 4 + + + + + + - - - - - - M M Trigger RS422 PE PE + - 15 16 S S Digital output Measurement values
scanontrol 27-25 / 275-25 / 271-25 2.5.2 19.5 5.6±1 1 69 68 max. ø1 max. ø 3 1 ø 17.9 ø5.5 4x thread M4 for protection cover plate mounting; not intended for sensor mounting 3 Three mounting holes M4x5 on each side,, R 2 2.5 65 81 53.3 84.4 5.5 64 84 16 117 7 ø8 R 1 5 sensor field of view extended 22 85 9 115 5 Standard Extended 23 25 27 extended laser line 2 85 9.5 115 5
ompact Highspeed SMRT Model scanontrol 27-25 275-25 271-25 z-axis (height) Standard 25mm Extended 4mm 9mm.5mm 115mm 85mm 5mm Linearity 1) ±.2% FSO (3sigma) ±5μm Resolution.4% FSO 1µm Reference resolution 2) 3) 4µm 23mm x-axis (width) Standard Extended 25mm 27mm 22mm mm Point distance 4µm Resolution x-axis 64 points/profile Profile frequency 1Hz 2,Hz 1Hz Measurement rate 64, points/sec 1,28 mio points/sec - FireWire Ethernet Interfaces profile data RS422 4) Trigger 4) ounter (encoder) 4) RS422 4) Signal output SMRT nalogue 5) Switching signal 5) Display (LED) 1x laser, 1x power/error/status Protection class IP 64 Operating temperature up to 5 Storage temperature -2 up to 7 able length Weight Galvanic isolation Vibration Shock Ethernet with Switch FireWire with HU up to 2m up to 5m appr. 7g Only at RS422, no isolation of 24V-supply, internal circuit and FireWire bus. If isolation necessary, external 24V-D-D-converter required 2g / 2... 5Hz 15g / 6ms Supply 8-3 VD, 5m Light source semiconductor laser 658nm perture angle laser line 2 Laser power Laser off standard 1mW (class 2M) optional 2mW (class 3) via software (standard) / via external contact (optional) Permissible ambient light (fluorescent light) 2) 1) Standard 2) Measuring object: Micro-Epsilon standard object (metallic, diffusely reflecting material) 3) ccording to a one-time averaging across the measuring field (64 points) 4) Programmable as serial interface or synchronisation input or encoder input 5) Only with Output Unit FSO = Full scale output 1,lx
8ø 14 scanontrol 27-5 / 275-5 / 271-5 69 68 21 max. ø1 93.3 4.5 max. ø 3 1 ø 17.9 5.6 ±1 1 5.5 4x thread M4 for protection cover plate mounting; not intended for sensor mounting 3 Three mounting holes M4x5 on each side,, 21 85 5.5 77 99.2 1.2 142 R1 5 R2 64.9 15 sensor field of view laser line 2 extended 41 16 16 175 175 225 Standard Extended 2 225 26 44 5 56 extended 64 26
15 ompact Highspeed Smart Model scanontrol 27-5 275-5 271-5 z-axis (height) Standard 5mm Extended 1mm 175mm 2mm 225mm 16mm 26mm Linearity 1) ±.2% FSO (3sigma) ±1μm Resolution.4% FSO 2µm Reference resolution 2) 3) 1µm 44mm x-axis (width) Standard Extended 5mm 56mm 41mm 64mm Point distance 8µm Resolution x-axis 64 points/profile Profile frequency 1Hz 2,Hz 1Hz Measurement rate 64, points/sec 1,28 mio points/sec - FireWire Ethernet Interfaces profile data RS422 4) Trigger 4) ounter (encoder) 4) RS422 4) Signal output SMRT nalogue 5) Switching signal 5) Display (LED) 1x laser, 1x power/error/status Protection class IP 64 Operating temperature up to 5 Storage temperature -2 up to 7 able length Weight Galvanic isolation Vibration Shock Ethernet with Switch FireWire with HU up to 2m up to 5m appr. 8g Only at RS422, no isolation of 24V-supply, internal circuit and FireWire bus. If isolation necessary, external 24V-D-D-converter required 2g / 2... 5Hz 15g / 6ms Supply 8-3 VD, 5m Light source semiconductor laser 658nm perture angle laser line 2 Laser power Laser off Permissible ambient light (fluorescent light) 2) standard 1mW (class 2M) optional 2mW (class 3) via software (standard) / via external contact (optional) 1,lx 1) Standard 2) Measuring object: Micro-Epsilon standard object (metallic, diffusely reflecting material) 3) ccording to a one-time averaging across the measuring field (64 points) 4) Programmable as serial interface or synchronisation input or encoder input 5) Only with Output Unit FSO = Full scale output
16 scanontrol 27-1 / 275-1 / 271-1 2.5 5.3 152.5 3 5.6±1 1 69 68 max. ø1 max. ø 1 ø17,9 ø5.5 4x thread M4 for protection cover plate mounting; not intended for sensor mounting 3 Three mounting holes M4x5 on each side,, 2.5 117 4 5.5 77 7.2 149.2 16 17 R 1 5 R 2 82 7.4 ø8,5 sensor field of view laser line 2 3 Standard Extended extended 76 3 35 35 4 45 45 88 1 1 extended 148 6 6
17 ompact Highspeed SMRT Model scanontrol 27-1 275-1 271-1 z-axis (height) Standard 1mm Extended 3mm 35mm 4mm 45mm 3mm 6mm Linearity 1) ±.2% FSO (3sigma) ±2μm Resolution.4% FSO 4µm Reference resolution 2) 3) 15µm 88mm x-axis (width) Standard Extended 1mm 1mm 76mm 148mm Point distance 16µm Resolution x-axis 64 points/profile Profile frequency 1Hz 2,Hz 1Hz Measurement rate 64, points/sec 1,28 mio points/sec - FireWire Ethernet Interfaces profile data RS422 4) Trigger 4) ounter (encoder) 4) RS422 4) Signal output SMRT nalogue 5) Switching signal 5) Display (LED) 1x laser, 1x power/error/status Protection class IP 64 Operating temperature up to 5 Storage temperature -2 up to 7 able length Weight Galvanic isolation Vibration Shock Ethernet with Switch FireWire with HU up to 2m up to 5m appr. 85g Only at RS422, no isolation of 24V-supply, internal circuit and FireWire bus. If isolation necessary, external 24V-D-D-converter required 2g / 2... 5Hz 15g / 6ms Supply 8-3 VD, 5m Light source semiconductor laser 658nm perture angle laser line 2 Laser power Laser off standard 1mW (class 2M) optional 2mW (class 3) via software (standard) / via external contact (optional) Permissible ambient light (fluorescent light) 2) 1) Standard 2) Measuring object: Micro-Epsilon standard object (metallic, diffusely reflecting material) 3) ccording to a one-time averaging across the measuring field (64 points) 4) Programmable as serial interface or synchronisation input or encoder input 5) Only with Output Unit FSO = Full scale output 1,lx