CA Mainframe Application Tuner 11.0 1 CA RS 1708 List Description Type RO96565 FALSE TN0499E MESSAGE DURING MONITOR INITIALIZATION PTF RO96766 TN6969E XCF MESSAGE EXIT FAILED. INTERNAL MCE QUEUEING ERROR PTF RO96814 WRONG CPU TIME IN DB2VIEW WHEN IFI IS USED PTF RO96842 C/C++ PROGRAM REGISTRATION: INCORRECT STMT NUMBERS ASSIGNED PTF RO96869 TN0895W INVALID INITPARM SERVERID PARAMETER PTF RO96907 CICS COLLECT PARAMETER DEFAULTS TO 1 INCORRECTLY PTF RO97128 TNMTERM TNMTMQ S01D ABEND PTF The CA RS 1708 service count for this release is 7
CA Mainframe Application Tuner 2 CA RS 1708 List for FMID Description Type RO96565 FALSE TN0499E MESSAGE DURING MONITOR INITIALIZATION PTF RO96766 TN6969E XCF MESSAGE EXIT FAILED. INTERNAL MCE QUEUEING ERROR PTF RO96814 WRONG CPU TIME IN DB2VIEW WHEN IFI IS USED PTF RO96842 C/C++ PROGRAM REGISTRATION: INCORRECT STMT NUMBERS ASSIGNED PTF RO96869 TN0895W INVALID INITPARM SERVERID PARAMETER PTF RO96907 CICS COLLECT PARAMETER DEFAULTS TO 1 INCORRECTLY PTF RO97128 TNMTERM TNMTMQ S01D ABEND PTF The CA RS 1708 service count for this FMID is 7
CA Mainframe Application Tuner 11.0 3 CA RS 1708 - PTF RO96565 RO96565 RO96565 M.C.S. ENTRIES = ++PTF (RO96565) FALSE TN0499E MESSAGE DURING MONITOR INITIALIZATION Incorrect occurrances of message TN0499E (TNEISRB abended -- SDUMP is available) can be seen during monitor initialization. Either message TN0491E (Target never located for profile) or message TN0492E (Terminated or unmatched for profile), should have been displayed, depending on which is more appropriate for the circumstances encountered. When CA Mainframe Application Tuner (CA MAT) is asked to monitor all steps of a multi-step job, a separate monitor is created for each target job step. This, of course, requires that the initialization, execution, and termination phases be performed for each monitor. When one or more of the target job steps runs very quickly (steps running for less than three seconds were observed), monitor initialization may still be running when the step ends. In that case message TN0499E, which indicates that an abend has occurred during monitor initialization, may be issued even though no abend has truly occurred. The message further indicates that an SDUMP was produced; however, since there was no abend, there was also no SDUMP produced. Minor. An incorrect message appears for those target job steps which run in too short a duration for successful monitoring. While the message is incorrect, the intent remains that monitoring can't complete for the step. However, monitors for target job steps of sufficient duration do complete successfully and are perfectly valid. None. CA MAT base component Version 10.0 MATUNE 715 Copyright (C) 2017 CA. All rights reserved. R00062-EES110-SP1 DESC(FALSE TN0499E MESSAGE DURING MONITOR INITIALIZATION). FMID () PRE ( RO93534 ) SUP ( TR96565 )
CA Mainframe Application Tuner 11.0 4 CA RS 1708 - PTF RO96766 RO96766 RO96766 M.C.S. ENTRIES = ++PTF (RO96766) TN6969E XCF MESSAGE EXIT FAILED. INTERNAL MCE QUEUEING ERROR CA MAT Server log received the following message. "TN6969E XCF Message Exit Failed. Reason - Internal MCE queueing error" A Dump is created after this error message. CA MAT Server log received the following message. "TN6969E XCF Message Exit Failed. Reason - Internal MCE queueing error" A Dump is created after this error message. However, this dump does not have CA MAT Server address space information. Since the dump does not have CA MAT Server address space information, it is not possible to debug the cause of TN6969E message. N/A CA MAT base component Version 10.0 MATUNE 717 Copyright (C) 2017 CA. All rights reserved. R00064-EES110-SP1 DESC(TN6969E XCF MESSAGE EXIT FAILED. INTERNAL MCE QUEUEING ERROR). FMID () PRE ( RO93534 ) SUP ( TR96766 ) ++HOLD (RO96766) SYSTEM FMID() REASON (ACTION ) DATE (17173) COMMENT ( +----------------------------------------------------------------------+ SEQUENCE After Apply PURPOSE The purpose is to apply the PTF across all LPARs. USERS AFFECTED All. KNOWLEDGE REQUIRED Recycle CA MAT Server. ACCESS REQUIRED The ability to recycle CA MAT Server. ************************** * STEPS TO PERFORM * ************************** Shutdown CA MAT server on all LPARs. Apply this PTF. Start CA MAT servers on all LPARs. Purpose is to ensure CA MAT servers on all LPARs are running with this PTF at the same time. ).
CA Mainframe Application Tuner 11.0 5 CA RS 1708 - PTF RO96814 RO96814 RO96814 M.C.S. ENTRIES = ++PTF (RO96814) WRONG CPU TIME IN DB2VIEW WHEN IFI IS USED When analyzing a DB2 monitor in CA MAT, DB2 view shows incorrect CPU times for records that were collected by IFI (Instrumentation Facility Interface). Wrong CPU times for monitors collected by IFI. Monitor data cannot be used for performance tunning. None. MATUNE 716 Copyright (C) 2017 CA. All rights reserved. R00066-EES110-SP1 DESC(WRONG CPU TIME IN DB2VIEW WHEN IFI IS USED). FMID () PRE ( RO93534 ) SUP ( RO95903 TR95903 TR96814 )
CA Mainframe Application Tuner 11.0 6 CA RS 1708 - PTF RO96842 RO96842 RO96842 M.C.S. ENTRIES = ++PTF (RO96842) C/C++ PROGRAM REGISTRATION: INCORRECT STMT NUMBERS ASSIGNED During registration of a C/C++ program, incorrect source statement numbers may be assigned to program offsets. When the "L" line command is issued on the CallerID panel (which is reached from CodeView via the "C" (CallerID) line command) the listing may be positioned to an incorrect source statement. Minor. The offsets that were produced during the measurement are correct. The registered listing is correct. The only problem is that the listing is positioned incorrectly for the offset that was presented in the "L" line command. Manually issue an ISPF FIND command to locate the offset within the listing. CA MAT base component Version 10.0 MATUNE 722 Copyright (C) 2017 CA. All rights reserved. R00067-EES110-SP1 DESC(C/C++ PROGRAM REGISTRATION: INCORRECT STMT NUMBERS ASSIGNED). FMID () PRE ( RO87758 RO91220 RO93534 ) SUP ( TR96842 ) ++HOLD (RO96842) SYSTEM FMID() REASON (ACTION ) DATE (17179) COMMENT ( +----------------------------------------------------------------------+ SEQUENCE After Apply PURPOSE To correct internal CA MAT tables used to describe C/C++ programs. USERS All CA MAT users who have C/C++ programs registered. AFFECTED KNOWLEDGE CA MAT program registration process. REQUIRED ACCESS Read access to any required program listing libraries. REQUIRED ************************** * STEPS TO PERFORM * ************************** After the application of this PTF it will be necessary to re-register all C/C++ programs. Note that re-registration of C/C++ programs is all that is necessary. Existing monitor data sets are valid and do not need to be recreated. Once the programs are re-registered, the listing will be positioned correctly when the "L" line command is issued from the CallerID panel. ).
CA Mainframe Application Tuner 11.0 7 CA RS 1708 - PTF RO96869 RO96869 RO96869 M.C.S. ENTRIES = ++PTF (RO96869) TN0895W INVALID INITPARM SERVERID PARAMETER Receive "TN0895W INVALID INITPARM SERVERID PARAMETER" message on CICS log when Serverid field length is 8. Receive "TN0895W INVALID INITPARM SERVERID PARAMETER" message on CICS log. Cannot specify INITPARM with a Serverid that has 8 characters. A valid Serverid length is from 1 to 8 characters long. Specify a 1 to 7 characters long Serverid. CA MAT base component Version 10.0 MATUNE 720 Copyright (C) 2017 CA. All rights reserved. R00068-EES110-SP1 DESC(TN0895W INVALID INITPARM SERVERID PARAMETER). FMID () PRE ( RO87758 RO91220 ) SUP ( TR96869 )
CA Mainframe Application Tuner 11.0 8 CA RS 1708 - PTF RO96907 RO96907 RO96907 M.C.S. ENTRIES = ++PTF (RO96907) CICS COLLECT PARAMETER DEFAULTS TO 1 INCORRECTLY When both CICSGLBL and CICSREGN parm members are not specified at server startup, COLLECT parameter defaluts to 1. COLLECT parameter should default to 0. When both CICSGLBL and CICSREGN parm members are not specified at server startup, COLLECT parameter defaluts to 1. COLLECT parameter defaluts to 1. Create CICSGLBL or CICSREGN parm members with desire values before server startup. MATUNE 721 Copyright (C) 2017 CA. All rights reserved. R00069-EES110-SP1 DESC(CICS COLLECT PARAMETER DEFAULTS TO 1 INCORRECTLY). FMID () PRE ( RO87758 RO91220 RO93534 ) SUP ( TR96907 )
CA Mainframe Application Tuner 11.0 9 CA RS 1708 - PTF RO97128 RO97128 RO97128 M.C.S. ENTRIES = ++PTF (RO97128) TNMTERM TNMTMQ S01D ABEND TNMTERM S01D abend. The abend is in TNMTMQ+X'400'. TNMTERM S01D abend. Cannot Monitor any job that has MQ activies after S01D abend. Recycle MAT Server after S01D abend. CA MAT base component Version 10.0 MATUNE 724 Copyright (C) 2017 CA. All rights reserved. R00070-EES110-SP1 DESC(TNMTERM TNMTMQ S01D ABEND). FMID () PRE ( RO93534 ) SUP ( TR97128 )
CA Mainframe Application Tuner 11.0 10 CA RS 1708 Product/Component Listing Product Family Product Release Intertest/SymDump TESTING TOOLS COMMON SYMBOLIC COMPONENT 09.00.00 Mainframe Application Tuner CA MAT @DAM COMPONENT 11.00.00 CA MAT BASE COMPONENT 11.00.00 PERFORMANCE MANAGEMENT ASSISTANT 11.00.00 The CA RS 1708 Product/Component Count for this release is 4
CA Mainframe Application Tuner 11.0 11 All CA RS Levels List CA RS Level FMID CAR1708 RO97128 RO96907 RO96869 RO96842 RO96814 RO96766 RO96565 CAR1707 RO96779 RO96571 RO96354 RO95985 RO95599 RO94814 CAR1706 RO96176 RO96046 RO95976 RO95968 RO95903 RO95188 RO95064 CAR1705 RO95698 CEETB00 RO95408 RO95402 RO95156 CAR1704 RO95104 RO94987 RO94715 RO94291 CAR1703 RO94059 RO94011 RO94010 RO93968 RO93875 RO93663 CAR1701 RO93697 RO93644 RO93572 RO93535 RO93534 RO93182 RO87758 RO87757 CEESB01 CEETB00 CEETB00 CAR1612 RO93225 RO91221 RO91220 RO91163 RO91159 RO90549 RO90215 RO87821 RO87759 CEESB01 CEY3B00 CEETB00 CEESB01 CAR1609 RO77654 CAR1604 RO86339 CAR1511 RO85682 CAR1510 RO83674
CA Mainframe Application Tuner 11.0 12 All CA RS Levels List CA RS Level FMID RO75531 CAR1509 RO83178 RO76680 RO74918 CAR1508 RO83076 RO79534 CAR1501 RO73218 RO72020 CAR1411 RO67798 CAR1403 RO65745 RO65202 RO63322 CAR1312 RO61892 RO61210 CAR1309 RO60135 RO59970 RO56472 RO37810