Innovations Octavis www.ifm.com/za fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems
product news Real-time maintenance* with efector octavis. Diagnostic electronics for vibration sensors with extended I/O range. Frequency-selective machine monitoring of up to measuring points. Ethernet interface for integration into operational data logging systems. analogue inputs for DC signals. Only analogue and switching output for collective alarm. 8 configurable I/Os: for alarm outputs or inputs of switching signals. Diagnostic electronics VSE00 VSE00 diagnostic electronics can be used for the continuous and simultaneous analysis and evaluation of the measured signals of up to vibration sensors with the octavis technology. In addition to standard alarm and analogue outputs (see article VSE00), VSE00 can signal the states of diagnosis objects using up to 8 further, freely configurable I/Os. If used as inputs, the I/Os can also electronically trigger diagnosis (e.g. in a reference run of a machine tool spindle), collect switching states of other sensors and transmit them to operational data logging via the OPC standard. The integrated FIFO history memory can store,000 values with time stamp. fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems * Real-time maintenance = maintenance at the right time, at the right place, with the right material and personnel.
Diagnostic systems Diagnostic electronics for efector vibration sensors type VSA Dimensions LEDs Wiring 50 BK BU WH BN 5,5 7 8 9 0 5 6 5 6 7 8 9 0 octavis ) Ethernet interface ) Combicon connector with screw terminals (option) BK BU WH BN BK BU WH BN 05 L+ ( V DC ±0 %) L- OU : switch/analog OU : switch IN (0/...0 ma / pulse) IN (0/...0 ma / pulse) BN WH BU BK Technical data Voltage supply [V] DC ±0 % Operating temperature [ C] 0...70 Protection Housing Inputs Outputs Data interface Accessories (to be ordered separately) Diagnostic electronics VSE00 IP 0, III DIN rail inch sensor inputs 0...0 ma rotational speed inputs (0/...0 ma or 0...0 V or pulse V) 8 x digital inputs/outputs (freely configurable) (PNP 00 ma) x digital alarm outputs (PNP 00 ma) or: x digital alarm output + x analogue output 0/...0 ma / 0...0 V 8 x digital inputs/outputs (freely configurable) (PNP 00 ma) Ethernet TCP/IP, (0 / 00 Mbits); RS-85 interface, half-duplex Type Description Order I/O I/O 5 6 7 8 8 7 6 5 I/O 7 I/O 8 Parameter setting software VES00 I/O I/O A (RS85) B (RS85) U-OUT (0...0 V) 9 0 5 6 0 9 8 7 I/O 5 I/O 6 U-IN (0...0 V) U-IN (0...0 V) Patch cable, m, RJ5, cross-link Patch cable, 5 m, RJ5, cross-link octavis OPC server EC080 E0 E0
product news Simply combined: machine protection and trend analysis. Modified, compact vibration diagnostic unit with trend memory. Permanent vibration monitoring according to ISO 086. Integrated trend memory for documentation and evaluation. Two switching outputs for warning and alarm. Frequency-selective online diag nosis (e.g. rolling element bearing, unbalance). Easy set-up using PC software. Permanent machine monitoring extended by overall velocity monitoring according to ISO 086. The compact vibration diagnostic units of the series VE combine vibration monitoring, diagnosis and trend memory in a very small space. The integrated accelerometer permanently measures the machine vibrations at a non-rotating component surface and also calculates frequency-selective diagnostic values as an option in addition to the ISO characteristic values. All calculated characteristic values are stored in a nonvolatile internal memory. With a freely adjustable memory interval the trend duration can be adapted to the user s needs. The unit is easy to use via PC software. fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems Monitoring of the overall vibration of rotating components.
Diagnostic systems Dimensions Products 7,6 0 ) Programming buttons Accessories 6 5 58, 6, 5, 5, LED M x 6 M8x Type Description Order Parameter setting software version.8 and higher 0 M5 VES00 Rolling element bearing diagnosis: g-monitors + frequency-selective diagnostic quantities (e.g. bearing condition) Speed range: 500...6000 rpm Vibration diagnostic unit: g-monitors + 5 frequency-selective diagnostic quantities (e.g. bearing condition) RS- interface, LED diagnosis Protection: IP 67, III Ambient temperature: -0...60 C Frequency resolution adjustable:.5 or 0.5 Hz Speed range:...000 rpm RS-85 interface Protection: IP 69K, III Ambient temperature: -0...75 C Frequency resolution adjustable:.5 or 0.5 Hz Speed range:...000 rpm Common technical data Sensing principle: micromechancial accelerometer / capacitive measuring principle / one measurement axis Order VB00 Order VE00 VE0 Parameter setting cable for RS- interface Parameter setting adapter USB / RS-85 interface E57 E0098 Measuring range ± 5 g (nominal ± 0) spectral analysis, Diagnostic method envelope-curve FFT, trend analysis Current consumption [ma] 00 ( V DC) (plus optional external pulse pick-up) Operating voltage [V DC] 0... Overload protection [g] 00 Power supply E0080 Trend memory 580 data sets as ring memory per diagnostic quantity or g-monitor Connectors and splitter boxes Type Description Order Socket, M, m black, 5-pole, PUR cable Socket, M, 5 m black, 5-pole, PUR cable Socket, M, 0 m black, 5-pole, PUR cable EVC070 EVC07 EVC07
product news Vibration sensor efector octavis. Vibration sensor for efector octavis diagnostic electronics. Flat design, entirely flush installation. Device connection: 60 cm PUR cable with M cable plug. Temperature range -0...85 C. Integrated self-test. Sensor type VSA00 The efector octavis vibration sensor is used to detect measurement values for the VSE diagnostic electronics. The special mechanical design as well as the integrated pigtail enable an almost flush integration in the machine surface. The vibration sensor type VSA00 permits vibration monitoring where the installation of a sensor has not been previously possible due to lack of space. fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems
Diagnostic systems Vibration sensor efector octavis for connection to diagnostic electronics type VSE. Dimensions 8 5 M6x,5 Technical data Measuring range [g] 5 Frequency range [Hz] 0...0000 Protection Housing material Vibration sensor VSA00 Connection: PUR cable with M cable plug IP 67 high-grade stainless steel (6S) Temperature range [ C] -0...85 Connectors and splitter boxes (to be ordered separately) Type Description Order Socket, M, m black, PUR cable Socket, M, 5 m black, PUR cable Socket, M, 0 m black, PUR cable EVC00 EVC00 EVC00
visit our website: www.ifm.com/za Overview ifm main catalogues: Position sensors and object recognition Inductive sensors Capacitive sensors Magnetic sensors, cylinder sensors Safety technology Valve sensors Photoelectric sensors Object recognition Encoders Evaluation systems, power supplies Fluid sensors and diagnostic systems Level sensors Flow sensors Pressure sensors Temperature sensors Diagnostic systems Evaluation systems, power supplies Bus systems Bus system AS-interface Power supplies Identification systems Multicode reading systems RF-identification systems Power supplies Control systems Control systems for mobile vehicles ifm electronic ifm electronic (Pty) Ltd National Tel: 086 IFM RSA (6 77) International Tel: +7 50 070 Branches Centurion (HO) Durban Klerksdorp & Northern Cape Rustenburg Richards Bay Steelpoort Vaal Triangle Port Elizabeth Cape Town Sales_ZA@ifm.com www.ifm.com/za We are now in the Mother City visit our webiste for the Cape Town Office new address details