SNLS0B, SNS0, SN7LS0B, SN7S0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain six independent hex inverters. They perform the Boolean function =. The SNLS0B and SNS0 are characterized for operation over the full military temperature range of C to 2 C. The SN7LS0B and SN7S0 are characterized for operation from 0 C to 70 C. FUTION TBLE (each inverter) INPUT H L OUTPUT L H SNLS0B, SNS0...J PCKGE SN7LS0B, SN7S0...D OR N PCKGE (TOP VIEW) GND 2 7 2 0 V CC SNLS0B, SNS0... FK PCKGE (TOP VIEW) V CC 2 20 7 7 0 2 GND No internal connection logic symbol logic diagram (positive logic) 2 0 2 2 This symbol is in accordance with NSI/IEEE Std - and IEC Publication 7-2. Pin numbers shown are for the D, J, and N packages. 0 2 PRODUCTION DT information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright, Texas Instruments Incorporated POST OFFICE BOX 0 DLLS, TEXS 72
SNLS0B, SNS0, SN7LS0B, SN7S0 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, V CC........................................................................ 7 V voltage, V I............................................................................ 7 V Operating free-air temperature range, T : SNLS0B............................. C to 2 C SN7LS0B................................. 0 C to 70 C Storage temperature range....................................................... C to 0 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SNLS0B SN7LS0B MIN NOM MX MIN NOM MX VCC Supply voltage.... V VIH High-level input voltage 2 2 V VIL Low-level input voltage 0. 0. 0.7 IOH High-level output current 0. 0. m IOL Low-level output current m T Operating free-air temperature 2 0 70 C pplies over C to 70 C temperature range pplies over 70 C to 2 C temperature range electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS SNLS0B SN7LS0B MIN TP MX MIN TP MX VIK VCC =. V, II = m.2.2 V VCC =. V to. V, IOH = 0. m VCC 2 VCC 2 V VCC =V. IOL = m 0.2 0. 0.2 0. IOL = m 0. 0. II VCC =. V, VI = 7 V 0. 0. m IIH VCC =. V, VI = 2.7 V 20 20 µ IIL VCC =. V, VI = 0. V 0. 0. m IO # VCC =. V, VO = 2.2 V 20 2 0 2 m ICCH VCC =. V, VI = 0 0.. 0.. m IC VCC =. V, VI =. V 2.. 2..2 m ll typical values are at VCC = V, T = 2 C. # The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. V V 2 POST OFFICE BOX 0 DLLS, TEXS 72
SNLS0B, SNS0, SN7LS0B, SN7S0 switching characteristics (see Figure ) FROM (INPUT) TO (OUTPUT) VCC =. V to. V, = 0 pf, RL = 00 Ω, T = MIN to MX SNLS0B SN7LS0B MIN MX MIN MX 7 2 2 For conditions shown as MIN or MX, use the appropriate value specified under recommended operating conditions. ns absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, V CC........................................................................ 7 V voltage, V I............................................................................ 7 V Operating free-air temperature range, T : SNS0............................... C to 2 C SN7S0................................... 0 C to 70 C Storage temperature range....................................................... C to 0 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SNS0 SN7S0 MIN NOM MX MIN NOM MX VCC Supply voltage.... V VIH High-level input voltage 2 2 V VIL Low-level input voltage 0. 0. V IOH High-level output current 2 2 m IOL Low-level output current 20 20 m T Operating free-air temperature 2 0 70 C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS SNS0 SN7S0 MIN TP MX MIN TP MX VIK VCC =. V, II = m.2.2 V VCC =. V to. V, IOH = 2 m VCC 2 VCC 2 V VCC =. V, IOL = 20 m 0. 0. 0. 0. V II VCC =. V, VI = 7 V 0. 0. m IIH VCC =. V, VI = 2.7 V 20 20 µ IIL VCC =. V, VI = 0. V 0. 0. m IO VCC =. V, VO = 2.2 V 0 2 0 2 m ICCH VCC =. V, VI = 0.. m IC VCC =. V, VI =. V 2. 2. m ll typical values are at VCC = V, T = 2 C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. POST OFFICE BOX 0 DLLS, TEXS 72
SNLS0B, SNS0, SN7LS0B, SN7S0 switching characteristics (see Figure ) FROM (INPUT) TO (OUTPUT) VCC =. V to. V, = 0 pf, RL = 00 Ω, T = MIN to MX SNS0 SN7S0 MIN MX MIN MX. For conditions shown as MIN or MX, use the appropriate value specified under recommended operating conditions. ns POST OFFICE BOX 0 DLLS, TEXS 72
SNLS0B, SNS0, SN7LS0B, SN7S0 MESUREMENT INFORMTION SERIES LS/7LS ND S/7S DEVICES VCC 7 V RL = R = R2 S RL RL R R2 LOD CIRCUIT FOR BI-STTE TOTEM-POLE OUTPUTS LOD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS LOD CIRCUIT FOR -STTE OUTPUTS Timing High-Level Pulse Data tsu th Low-Level Pulse tw SETUP ND HOLD TIMES PULSE DURTIONS Control (low-level enabling) Waveform S Closed (see Note B) Waveform 2 S Open (see Note B) tpzl tpzh tphz tplz ENBLE ND DISBLE TIMES, -STTE OUTPUTS 0 V In-Phase Out-of-Phase (see Note C) PROPGTION DEL TIMES NOTES:. includes probe and jig capacitance. B. Waveform is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of -state outputs, switch S is open. D. ll input pulses have the following characteristics: PRR MHz, tr = tf = 2 ns, duty cycle = 0%. E. The outputs are measured one at a time with one transition per measurement. Figure. Load Circuits and Voltage Waveforms POST OFFICE BOX 0 DLLS, TEXS 72