SN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
|
|
- Domenic Reed
- 5 years ago
- Views:
Transcription
1 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent -input positive-or gates. They perform the Boolean functions Y = A B or Y = A + B in positive logic. The SNALS and SNAS are characterized for operation over the full military temperature range of C to C. The SN7ALS and SN7AS are characterized for operation from 0 C to 70 C. FUTION TABLE (each gate) INPUTS OUTPUT A B Y H X H X H H L L L SNALS, SNAS...J PACKAGE SN7ALS, SN7AS...D OR N PACKAGE (TOP VIEW) GND 7 0 V CC B A Y B A Y SNALS, SNAS... FK PACKAGE (TOP VIEW) V CC B A Y B GND Y A No internal connection logic symbol logic diagram (positive logic) A B A B 0 Y Y A B A B 0 Y Y This symbol is in accordance with ANSI/IEEE Std - and IEC Publication 7-. Pin numbers shown are for the D, J, and N packages. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright, Texas Instruments Incorporated POST OFFICE BOX 0 DALLAS, TEXAS 7
2 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, V CC V voltage, V I V Operating free-air temperature range, T A : SNALS C to C SN7ALS C to 70 C Storage temperature range C to 0 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SNALS SN7ALS MIN NOM MAX MIN NOM MAX VCC Supply voltage.... V VIH High-level input voltage V VIL Low-level input voltage V IOH High-level output current ma IOL Low-level output current ma TA Operating free-air temperature 0 70 C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS SNALS SN7ALS MIN TYP MAX MIN TYP MAX VIK VCC =. V, II = ma.. V VCC =. V to. V, IOH = 0. ma VCC VCC V VCC =V. IOL = ma IOL = ma II VCC =. V, VI = 7 V ma IIH VCC =. V, VI =.7 V 0 0 µa IIL VCC =. V, VI = 0. V ma IO VCC =. V, VO =. V 0 0 ma ICCH VCC =. V, VI =. V.. ma IC VCC =. V, VI = ma All typical values are at VCC = V, TA = C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. switching characteristics (see Figure ) V FROM (INPUT) TO (OUTPUT) VCC =. V to. V, = 0 pf, RL = 00 Ω, TA = MIN to MAX SNALS SN7ALS MIN MAX MIN MAX AorB Y For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ns POST OFFICE BOX 0 DALLAS, TEXAS 7
3 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, V CC V voltage, V I V Operating free-air temperature range, T A : SNAS C to C SN7AS C to 70 C Storage temperature range C to 0 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SNAS SN7AS MIN NOM MAX MIN NOM MAX VCC Supply voltage.... V VIH High-level input voltage V VIL Low-level input voltage V IOH High-level output current ma IOL Low-level output current 0 0 ma TA Operating free-air temperature 0 70 C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TEST CONDITIONS SNAS SN7AS MIN TYP MAX MIN TYP MAX VIK VCC =. V, II = ma.. V VCC =. V to. V, IOH = ma VCC VCC V VCC =. V, IOL = 0 ma V II VCC =. V, VI = 7 V ma IIH VCC =. V, VI =.7 V 0 0 µa IIL VCC =. V, VI = 0. V ma IO VCC =. V, VO =. V 0 0 ma ICCH VCC =. V, VI =. V ma IC VCC =. V, VI = ma All typical values are at VCC = V, TA = C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. switching characteristics (see Figure ) FROM (INPUT) TO (OUTPUT) VCC =. V to. V, = 0 pf, RL = 00 Ω, TA = MIN to MAX SNAS SN7AS MIN MAX MIN MAX 7.. AorB Y.. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ns POST OFFICE BOX 0 DALLAS, TEXAS 7
4 MEASUREMENT INFORMATION SERIES ALS/7ALS AND AS/7AS DEVICES VCC 7 V RL = R = R S RL RL R R LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS LOAD CIRCUIT FOR -STATE OUTPUTS Timing. V. V 0. V High-Level Pulse. V. V. V 0. V Data tsu. V th. V. V 0. V Low-Level Pulse tw. V. V. V 0. V TAGE WAVEFORMS SETUP AND HOLD TIMES TAGE WAVEFORMS PULSE DURATIONS Control (low-level enabling) Waveform S Closed (see Note B) tpzl. V. V tphz. V tplz. V 0. V. V 0. V tpzh Waveform S Open. V 0. V (see Note B) 0 V TAGE WAVEFORMS ENABLE AND DISABLE TIMES, -STATE OUTPUTS In-Phase Out-of-Phase (see Note C). V. V. V. V 0. V. V. V. V TAGE WAVEFORMS PROPAGATION DELAY TIMES NOTES: A. includes probe and jig capacitance. B. Waveform is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of -state outputs, switch S is open. D. All input pulses have the following characteristics: PRR MHz, tr = tf = ns, duty cycle = 0%. E. The outputs are measured one at a time with one transition per measurement. Figure. Load Circuits and Voltage Waveforms POST OFFICE BOX 0 DALLAS, TEXAS 7
5 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI s standard warranty. ing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ( CRITICAL APPLICATIONS ). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. ILUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER S RISK. In order to minimize risks associated with the customer s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI s publication of information regarding any third party s products or services does not constitute TI s approval, warranty or endorsement thereof. Copyright, Texas Instruments Incorporated
SN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS
SNALS0B, SNAS0, SN7ALS0B, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More informationSN54ALS20A, SN54AS20, SN74ALS20A, SN74AS20 DUAL 4-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs description These devices contain two independent -input positive-nand
More informationSN54ALS645A, SN54AS645, SN74ALS645A, SN74AS645 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Bidirectional Bus Traceivers in High-Deity 0-Pin Packages True Logic 3-State Outputs Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and
More informationSN54F38, SN74F38 QUADRUPLE 2-INPUT POSITIVE-NAND BUFFERS WITH OPEN-COLLECTOR OUTPUTS
SNF, SN7F SDFS0A MARCH 7 REVISED OCTOBER Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 00-mil DIPs description These devices contain four
More informationSN54ALS573C, SN54AS573A, SN74ALS573C, SN74AS573A OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout True Logic Outputs Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), Standard Plastic (N)
More informationSN74ALS533A, SN74AS533A OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS SDAS270 DECEMBER 1994
Eight Latches in a Single Package -State Bus-Driving Inverting Outputs Full Parallel Access for Loading Buffered Control Inputs pnp Inputs Reduce dc Loading on Data Lines Package Optio Include Plastic
More informationSN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS
SNBCT0, SNBCT0 SCBS0B JULY REVISED NOVEMBER Open-Collector Version of BCT Open-Collector Outputs Drive Bus Lines or Buffer Memory Address Registers ESD Protection Exceeds 000 V Per MIL-STD-C Method 0 Packages
More informationSN54ALS74A, SN54AS74, SN74ALS74A, SN74AS74 DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET
SNALS7A, SNAS7, SN7ALS7A, SN7AS7 SDASA D, APRIL 9 REVISED SEPTEMBER 97 Package Optio Include Plastic Small Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 00-mil DIPs Dependable
More informationSN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS
SNLS0B, SNS0, SN7LS0B, SN7S0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More information74AC11139 DUAL 2-LINE DECODER/DEMULTIPLEXER
Designed Specifically for High-Speed Memory Decoders and Data Tramission Systems Incorporates Two Enable Inputs to Simplify Cascading and/or Data Reception Center-Pin V CC and GND Configuratio Minimize
More informationMC1488, SN55188, SN75188 QUADRUPLE LINE DRIVERS
Meet or Exceed the Requirements of ANSI EIA/ TIA--E and ITU Recommendation V. Designed to Be Interchangeable With Motorola MC1 Current-Limited Output: ma Typical Power-Off Output Impedance: Ω Minimum Slew
More informationSN54LVTH16240, SN74LVTH V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation Support Mixed-Mode Signal Operation (5-V Input
More information74AC11240 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS
Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) -m Process 500-mA Typical Latch-Up Immunity
More informationDistributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE,
More information~ > TEXAS~ SN5427, SN54LS27, SN7427, SN74LS27 TRIPLE 3-INPUT POSITIVE-NOR GATES. Vee INSTRUMENTS POST OFOICE BOX OALLAS.
SDLS089 Package Options Include Plastic "Small Outline" Packages, Ceramic Chip Carriers and Flat Packages, and Plastic and Ceramic DIPs Dependable Texas Instruments Quality and Reliability description
More informationSN54ALS880A, SN54AS880, SN74ALS880A, SN74AS880 DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS
N54AL880A, N54A880, N74AL880A, N74A880 DUAL 4-BIT D-TYPE LATCHE WITH 3-TATE OUTPUT DA079A D21, DECEMBER 1982 REVIED MAY 198 3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B
More informationdescription VCC 1PRE 1OC 1D1 1C 1Q1 1Q2 1Q3 1Q4 2Q1 2Q2 2Q3 2Q4 2C 2PRE 1D2 1D3 1D4 2D1 2D2 2D3 2D4 2OC GND 1PRE 1OC 1Q1 1D1 1Q2 1Q3 1Q4 1D2 1D3 1D4
3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B is Alternative Version With Noninverting Outputs Package Optio Include Plastic mall Outline Packages, Both Plastic and Ceramic
More informationSN54LVTH16374, SN74LVTH V ABT 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation Support Mixed-Mode Signal Operation (5-V Input
More informationTLC1549C, TLC1549I, TLC1549M 10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL
0-Bit-Resolution A/D Converter Inherent Sample and Hold Total Unadjusted Error...± LSB Max On-Chip System Clock Terminal Compatible With TLC549 and TLV549 CMOS Technology description The TLC549C, TLC549I,
More informationTM124MBK36C, TM124MBK36S BY 36-BIT TM248NBK36C, TM248NBK36S BY 36-BIT DYNAMIC RAM MODULE
Organization TM124MBK36C...48576 36 TM248NBK36C...2097152 36 Single 5-V Power Supply (±% Tolerance) 72-pin Leadless Single In-Line Memory Module (SIMM) TM124MBK36C Utilizes Eight 4-Megabit DRAMs in Plastic
More informationL293 QUADRUPLE HALF-H DRIVER
QUDRUPE F- DRIVER SRS005 SEPTEMBER 8 REVISED MY 0 - Current Capability Per Driver Pulsed Current - Driver Wide Supply Voltage Range: 4.5 V to V Separate -ogic Supply NE Package Designed for eat Sinking
More informationTLV1543C, TLV1543M 3.3-V 10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
3.3-V Supply Operation 0-Bit-Resolution A/D Converter Analog Input Channels Three Built-In Self-Test Modes Inherent Sample and Hold Total Unadjusted Error...± Max On-Chip System Clock End-of-Conversion
More informationSN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
More information27 - Line SCSI Terminator With Split Reverse Disconnect
27 - Line SCSI Terminator With Split Reverse Disconnect FEATURES Complies with SCSI, SCSI-2, SCSI-3, SPI and FAST-20 (Ultra) Standards 2.5pF Channel Capacitance During Disconnect 100µA Supply Current in
More informationFAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTERS
Integrated Device Technology, Inc. FAST CMOS SYNCHRONOUS PRESETTABLE BINARY COUNTERS IDT54/74FCT161/A/C IDT54/74FCT163/A/C FEATURES: IDT54/74FCT161/163 equivalent to FAST speed IDT54/74FCT161A/163A 35%
More informationSN74ACT8994 DIGITAL BUS MONITOR IEEE STD (JTAG) SCAN-CONTROLLED LOGIC/SIGNATURE ANALYZER
SN74ACT8994 Member of the Texas Itruments SCOPE Family of Testability Products Compatible With the IEEE Standard 1149.1-1990 (JTAG) Test Access Port and Boundary-Scan Architecture Contai a 1024-Word by
More informationSN74BCT756 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS
BiCMOS Design Significantly Reduces I CCZ ESD Protection Exceeds 200 Per MIL-STD-883, Method 3015; Exceeds 20 Using Machine Model (C = 200 pf, R = 0) Open-Collector Outputs Drive Bus Lines or Buffer Memory
More informationFAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT240A/C FEATURES: IDT74FCT240A 25% faster than FAST IDT74FCT240C up to 55% faster than FAST 64mA IOL CMOS power levels (1mW typ. static) Meets or exceeds JEDEC
More informationFAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT54/74FCT244T/AT/CT FEATURES: Std., A, and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.)
More informationIDT74FST BIT 2:1 MUX/DEMUX SWITCH
16-BIT 2:1 MUX/DEMUX SWITCH IDT74FST163233 FEATURES: Bus switches provide zero delay paths Low switch on-resistance TTL-compatible input and output levels ESD > 200 per MIL-STD-883, Method 3015; > 20 using
More informationIDT54/74FCT244/A/C FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: OEA OEB DA1 OA1 DB1 OB1 DA2 OA2 OB2 DB2 DA3 OA3
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT/7FCT/A/C FEATURES: IDT/7FCTA equivalent to FAST speed and drive IDT/7FCTA % faster than FAST IDT/7FCTC up to % faster than FAST IOL = ma (commercial) and 8mA (military)
More informationIDT54/74FCT541/A/C FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT/7FCT/A/C FEATURES: IDT/7FCT equivalent to FAST speed and drive IDT/7FCTA % faster than FAST IDT/7FCTC up to % faster than FAST IOL = ma (commercial) and 8mA (military)
More informationDatasheetArchive.com. Request For Quotation
atasheetarchive.com Request For uotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative
More information3.3 Volt CMOS Bus Interface 8-Bit Latches
Q 3.3 Volt CMOS Bus Interface 8-Bit Latches QS74FCT3373 QS74FCT32373 FEATURES/BENEFITS Pin and function compatible to the 74F373 JEDEC spec compatible 74LVT373 and 74FCT373T IOL = 24 ma Com. Available
More informationIDT74LVC541A 3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC541A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R
More informationHardware UART for the TMS320C3x
TMS320 DSP DESIGNER S NOTEBOOK Hardware UART for the TMS320C3x APPLICATION BRIEF: SPRA223 Contributed by Lawrence Wong Digital Signal Processing Products Semiconductor Group Texas Instruments June 1993
More informationFUNCTION TABLE (each buffer/driver) INPUTS OUTPUT L H H L L L H X Z POST OFFICE BOX DALLAS, TEXAS 75265
State-of-the-Art BiCMOS Design Significantly Reduces I CCZ High-Impedance State During Power Up and Power Down ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model
More information3.3V CMOS BUFFER/CLOCK DRIVER
3. CMOS BUFFER/CLOCK DRIVER 3. CMOS BUFFER/CLOCK DRIVER IDT49FCT380/A FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 1.0ns (max.) Very low CMOS power
More information3.3V CMOS 1-TO-5 CLOCK DRIVER
3. CMOS 1-TO-5 CLOCK DRIVER 3. CMOS 1-TO-5 CLOCK DRIVER IDT74FCT38075 FEATURES: Advanced CMOS Technology Guaranteed low skew < 100ps (max.) Very low duty cycle distortion< 250ps (max.) High speed propagation
More information3.3V CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
. CMOS OCTAL IDIRECTIONAL TRANSCEIVER. CMOS OCTAL IDIRECTIONAL TRANSCEIVER IDT7FCT/A FEATURES: 0. MICRON CMOS Technology ESD > 00 per MIL-STD-, Method 0; > 0 using machine model (C = 00pF, R = 0) VCC =.
More informationLogic Solutions for IEEE Std 1284
Logic Solutions for IEEE Std SCEA013 June 1999 1 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service
More informationIDT74LVC244A 3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC244A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0)
More informationdescription/ordering information
Operate From 1.65 V to 3.6 V Specified From 40 C to 85 C, 40 C to 125 C, and 55 C to 125 C Inputs Accept Voltages to 5.5 V Max t pd of 4.1 ns at 3.3 V Typical V OLP (Output Ground Bounce)
More informationIDT74LVC245A 3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC245A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF,
More informationIDT74FCT299/A/C FAST CMOS 8-INPUT UNIVERSAL SHIFT REGISTER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM
IT74FCT299 A/C FAST CMOS 8-INPUT UNIVERSAL SHIFT REGISTER IT74FCT299/A/C FEATURES: IT74FCT299 equivalent to FAST speed and drive I74FCT299A 25% faster than FAST IT74FCT299C 35% faster than FAST Equivalent
More information3.3V CMOS HEX BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS HEX BUFFER/DRIVER WITH OPEN-DRAIN S AND 5 T TOLERANT I/O IDT74LVC07A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0) VCC
More informationSN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS
SN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS SCBS479 MARCH 1993 REVISED MAY 1994 BiCMOS Design Significantly Reduces I CCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds
More informationSN74F543 OCTAL REGISTERED TRANSCEIVER WITH 3-STATE OUTPUTS
SN74F543 OCTAL REGISTERED TRANSCEIVER WITH 3-STATE OUTPUTS SDFS025B D2942, MARCH 1987 REVISED OCTOBER 1993 3-State True Outputs Back-to-Back Registers for Storage Package Options Include Plastic Small-Outline
More informationFUNCTION TABLE INPUTS OUTPUT OE1 OE2 A Y L L L L L L H H H X X Z X H X Z POST OFFICE BOX DALLAS, TEXAS 75265
SCBS007E APRIL 1987 REVISED NOVEMBER 1993 BiCMOS Design Substantially Reduces I CCZ Output Ports Have Equivalent 25-Ω Resistors; No External Resistors Are Required Specifically Designed to Drive MOS DRAMs
More informationIDT74LVCH16373A TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD
3.3V CMOS 16-BIT IDT74LVCH16373A TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(0) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20
More informationSN74ALS990 8-BIT D-TYPE TRANSPARENT READ-BACK LATCH
SN74ALS990 8-BIT D-TYPE TRANSPARENT READ-BACK LATCH 3-State I/O-Type Read-Back Inputs Bus-Structured Pinout True Logic Outputs Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic
More informationCCD VERTICAL DRIVER FOR DIGITAL CAMERAS
CCD VERTICAL DRIVER FOR DIGITAL CAMERAS FEATURES CCD Vertical Driver: Three Field CCD Support Two Field CCD Support Output Drivers: 3 Levels Driver (V-Transfer) x 5 2 Levels Driver (V-Transfer) x 3 2 Levels
More informationEV Evaluation System User Guide. Contents. Kit Contents. Introduction
Contents EV2200 40 Evaluation System User Guide Section Page No. Introduction 1 Kit Contents 1 Hardware and Software Setup 2 Software Installation 2 Hardware Connection 2 Operation 2 Starting the Program
More informationSN75240 DUAL UNIVERSAL SERIAL BUS PORT TRANSIENT SUPPRESSOR SLLS266 FEBRUARY 1997
DUL UNIVERSL SERIL US PORT TRNSIENT SUPPRESSOR SLLS266 FERURY 997 Design to Protect Submicron 3-V or -V Silicon from Noise Transients pplicable to Two High- or Low-Speed Universal Serial us (US) Host,
More informationDual Access into Single- Access RAM on a C5x Device
TMS320 DSP DESIGNER S NOTEBOOK Dual Access into Single- Access RAM on a C5x Device APPLICATION BRIEF: SPRA215 Mansoor Chishtie Digital Signal Processing Products Semiconductor Group Texas Instruments February
More informationbq2056 Designed to Go Parts List General Description bq2056 Charge Algorithm Current Voltage
Designed to GO... Practical and Cost-Effective Battery Management Design Examples by Benchmarq Series 2056, Number One Single- and Double-Cell Low-Dropout Lithium-Ion Charger Using the bq2056 Features
More informationVoltage Translation (5 V, 3.3 V, 2.5 V, 1.8 V), Switching Standards, and Bus Contention
Voltage Translation (5 V, 3.3 V, 2.5 V, 1.8 V), Switching Standards, and Bus Contention SCYA006 September 1999 1 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes
More informationIncrease Current Drive Using LVDS
Application Report SLLA100 May 2001 Increase Current Drive Using LVDS Steve Corrigan DSBU LVDS ABSTRACT The most common configuration for an LVDS connection is the one-way transmission topology. A single
More informationApplication Report. Mixed Signal Products SLOA028
Application Report July 1999 Mixed Signal Products SLOA028 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product
More informationTexas Instruments Solution for Undershoot Protection for Bus Switches
Application Report SCDA007 - APRIL 2000 Texas Instruments Solution for Undershoot Protection for Bus Switches Nadira Sultana and Chris Graves Standard Linear & Logic ABSTRACT Three solutions for undershoot
More informationA24C08. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION The provides 8192 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 1024 words of 8 bits each. The device is optimized for use in many industrial
More informationSN74LVC1G07YZAR SINGLE BUFFER/DRIVER WITH OPEN-DRAIN OUTPUT. description/ordering information
vailable in the Texas Instruments NanoStar and NanoFree Packages Supports 5-V V CC Operation Input and Open-Drain Output ccept Voltages up to 5.5 V Max t pd of 4.2 ns at 3.3 V Low Power Consumption, 0
More informationSSTL for DIMM Applications. SCBA014 December 1997
SSTL for DIMM Applications SCBA014 December 1997 1 Introduction The stub series-terminated logic (SSTL) interface standard is intended for high-speed memory interface applications and specifies switching
More informationIDT74CBTLV3257 LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS SWITCH
LOW-VOLTAGE QUAD 2:1 MUX/DEMUX BUS ITCH LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS ITCH IDT74CBTLV3257 FEATURES: Functionally equivalent to QS3257 5Ω switch connection between two ports Isolation under power-off
More informationSEMICONDUCTOR TECHNICAL DATA
SEICONDUCTOR TECHNICAL DATA Ω The is designed for asynchronous communication between data buses. The device tramits data from the A bus to the B bus or from the B bus to the A bus depending upon the logic
More informationA24C02. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 2048 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 256 words of 8 bits each. The device is optimized for use in many industrial and
More informationLOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH
LOW-VOLTAGE 4-BIT BUS EXCHANGE ITCH LOW-VOLTAGE 4-BIT BUS EXCHANGE ITCH IDT74CBTLV6 FEATURES: 5Ω A/B bi-directional switch Isolation Under Power-Off Conditions Over-voltage tolerant Latch-up performance
More informationLOW-VOLTAGE 10-BIT BUS SWITCH
LOW-VOLTAGE 0-BIT BUS ITCH IDT74CBTLV84 FEATURES: 5Ω A/B bi-directional bus switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance exceeds 00mA VCC =.V -.6V, Normal Range
More informationLOW-VOLTAGE OCTAL BUS SWITCH
LOW-VOLTAGE OCTAL BUS ITCH IDT74CBTLV44 FEATURES: Pin-out compatible with standard '44 Logic products 5Ω A/B bi-directional switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance
More informationTLC1542C, TLC1542I, TLC1542M, TLC1542Q, TLC1543C, TLC1543I, TLC1543Q 10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
TLC542C, TLC542I, TLC542M, TLC542Q, TLC543C, TLC543I, TLC543Q 0-Bit Resolution A/D Converter Analog Input Channels Three Built-In Self-Test Modes Inherent Sample-and-Hold Function Total Unadjusted Error...±
More informationLPGD SBDN GND 4VR PZVS VLMU VLML PZVO PIZO. 3 GND Signal ground Signal ground pin. Connect ADC and DAC grounds to here.
DESCRIPTION The is an electronic module designed for driving piezos with high efficiency. Figure 1 shows the physical photo of. The output voltage is 30V to 300V when powered by a 5V power supply. Figure
More informationUsing LDOs and Power Managers in Systems With Redundant Power Supplies
Application Report SLVA094 - November 000 Using LDOs and Power Managers in Systems With Redundant Power Supplies Ludovic de Graaf TI Germany ABSTRACT For reasons of continuity in some systems, independent
More informationTMS320C5x Memory Paging (Expanding its Address Reach)
TMS320 DSP DESIGNER S NOTEBOOK TMS320C5x Memory Paging (Expanding its Address Reach) APPLICATION BRIEF: SPRA242 Contributed by Joe George Digital Signal Processing Products Semiconductor Group Texas Instruments
More informationDV2003S1. Fast Charge Development System. Control of On-Board P-FET Switch-Mode Regulator. Features. Connection Descriptions. General Description
DV003S1 Fast Charge Development System Control of On-Board P-FET Switch-Mode Regulator Features bq003 fast-charge control evaluation and development Charge current sourced from an on-board switch-mode
More informationReading a 16-Bit Bus With the TMS320C5x Serial Port
TMS320 DSP DESIGNER S NOTEBOOK Reading a 16-Bit Bus With the TMS320C5x Serial Port APPLICATION BRIEF: SPRA270 Manuel Rodrigues Digital Signal Processing Products Semiconductor Group Texas Instruments May
More informationA4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW-VOLTAGE
DESCRIPTION The is a Single Wide-Bandwidth, fast single-pole double-throw (SPDT) CMOS switch featuring an On-Resistance of 2.7 ohm at VCC=5.0V and wide power supply range from 1.8V to 5.5V. It can be used
More informationSN10KHT5541 OCTAL ECL-TO-TTL TRANSLATOR WITH 3-STATE OUTPUTS
SN10KHT5541 10KH Compatible ECL and TTL Control Inputs Noninverting s Flow-Through Architecture Optimizes PCB Layout Center Pin V CC, V EE, and GND Configuratio Minimize High-Speed Switching Noise Package
More informationSN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS
SN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS SCBS479 MARCH 993 REVISED MAY 994 BiCMOS Design Significantly Reduces I CCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 305; Exceeds
More informationDebugging Shared Memory Systems
Application Report SPRA754 - May 2001 Debugging Shared Memory Systems Jeff Hunter Software Development Systems/Emulation Team ABSTRACT Multiple cores on a single processor often share a common block of
More informationUsing the bq3285/7e in a Green or Portable Environment
in a Green or Portable Environment Introduction The bq3285/7e Real-Time Clock is a PC/AT-compatible real-time clock that incorporates three enhanced features to facilitate power management in Green desktop
More informationSN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS
SN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS SCBS034B JULY 1989 REVISED NOVEMBER 1993 Open-Collector Version of BCT244 Open-Collector Outputs Drive Bus Lines or Buffer Memory
More informationImplementation of a CELP Speech Coder for the TMS320C30 using SPOX
Implementation of a CELP Speech Coder for the TMS320C30 using SPOX APPLICATION REPORT: SPRA401 Mark D. Grosen Spectron Microsystems, Inc Digital Signal Processing Solutions IMPORTANT NOTICE Texas Instruments
More informationSN74ALS232B 16 4 ASYNCHRONOUS FIRST-IN, FIRST-OUT MEMORY
SN74ALS232B 4 ASYNCHRONOUS FIRST-IN, FIRST-OUT MEMORY SCAS25B FEBRUARY 989 REVISED APRIL 998 Independent Asynchronous Inputs and Outputs Words by 4 Bits Data Rates up to 40 MHz Fall-Through Time 4 ns Typical
More informationA24C64. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 65536 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 8192 words of 8 bits each. The is optimized for use in many industrial and commercial
More informationDual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
More informationSN54ALVTH16244, SN74ALVTH V/3.3-V 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Members of the Texas Instruments Widebus Family State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation 5-V I/O Compatible High Drive Capability (
More information74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate
Rev. 3 20 November 2015 Product data sheet 1. General description The high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The is a quad
More informationSN54LV163A, SN74LV163A 4-BIT SYNCHRONOUS BINARY COUNTERS
2-V to 5.5-V V CC Operation Max t pd of 9.5 ns at 5 V Typical V OLP (Output Ground Bounce) 2.3 V at V CC = 3.3 V, T A = 25 C Support
More informationTYPES SN7406, SN7416, SN5406, SN5416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
TYPES SN7406, SN7416, SN5406, SN5416 Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Input Clamping Diodes Simplify System Design Open-Collector and Relays Driver for Indicator Lamps
More informationQUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH IDTQS338 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Zero propagation delay,
More informationThe photograph below shows the PMP9730 Rev E prototype assembly. This circuit was built on a PMP9730 Rev D PCB.
1 Photos The photograph below shows the PMP9730 Rev E prototype assembly. This circuit was built on a PMP9730 Rev D PCB. 2 Standby Power No Load Pin AC (W) 120VAC/60Hz 0.187 230VAC/50Hz 0.238 Page 1 of
More informationTFP101, TFP201, TFP401, TFP401A 2Pix/Clk Output Mode
Application Note SLLA137 March 2003 TFP101, TFP201, TFP401, TFP401A 2Pix/Clk Output Mode Digital Visual Interface ABSTRACT This document explains the recommended configuration to operate the TFP101/201/401(A)
More informationUCC3917 Floating Hot Swap Power Manager Evaluation Board
User s Guide SLUU03 - June 00 UCC397 Floating Hot Swap Power Manager Evaluation Board Power Distribution & Power Supply Contents Introduction.........................................................................
More informationConstant Temperature Chamber ATITRS1. Figure 1. Top View. Figure 2. Front View
Figure 1. Top View Figure 2. Front View Copyrights 2000-2018,, Inc. All Rights Reserved. Updated on 11/13/2018 www.analogti.com 1 Figure 3. Side View Figure 4. Back View Copyrights 2000-2018,, Inc. All
More informationSN54ALVTH162244, SN74ALVTH V/3.3-V 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
State-of-the-Art Advanced BiCMOS Technology (ABT) Widebus Design for 2.5-V and 3.3-V Operation and Low Static Power Dissipation Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 2.3-V
More informationTIL311 HEXADECIMAL DISPLAY WITH LOGIC
SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE, AND DISPLAY -BIT BINARY DATA 7,6-mm (0.300-Inch) Character Height High Brightness Internal TTL MSI Chip With Latch, Decoder,
More informationTexas Instruments Voltage-Level-Translation Devices
Application Report SCEA21 - February 21 Texas Instruments -Level-Translation Devices Nadira Sultana and Chris Cockrill Standard Linear & Logic ABSTRACT In electronic systems design, there is a need to
More informationSN54ALVTH162827, SN74ALVTH V/3.3-V 20-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS description
State-of-the-Art Advanced BiCMOS Technology (ABT) Widebus Design for 2.5-V and 3.3-V Operation and Low Static Power Dissipation Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 2.3-V
More information74AC11244 OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS
EPIC (Enhanced-Performance Implanted CMOS ) 1-µm Process 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and GND Pin Configurations
More informationTechniques for Profiling on ROM-Based Applications
Application Report SPRA761 June 2001 Techniques for Profiling on ROM-Based Applications Harsh Sabikhi Code Composer Studio, Applications Engineering ABSTRACT This application report describes the methods
More information