Contents Contents Digital Night Vision Monocular Model: Contents Overview 3 Operating Hints 4 Components 5 7 Battery Installation 7 Power On 8 Power Off 8 Scenery Observation 9 Screen Brightness 10 Photo Shooting 13 Playbacking 14 Video Shooting 16 Monitors Connection 17 PCs Connection 17 Auto Power Off 18 Power Management 18 Basic Parameters 20 Configuration Standard 21 Operating Environment and Announcements 22 1 2 Overview Operating Hints Operating Hints Name Digital Night Vision Monocular Model Features The night vision monocular which can be used in complete darkness or low light situation. The viewing distance (full dark): Infinity The viewing distance (low light): 200 meters USB, AV OUT and DC IN sockets are equipped. It could be used during the day or at night, owning the photo shooting, video shooting, playback functions. It achieves 5X optical zoom and 8X digital zoom. It is the perfect optical device to enhance human s visual senses. Night Vision Monocular is the optical instrument to obtain the images of objects under the low light and night situation. Infrared Illuminator is equipped. It applies to use in the full dark environment. Turn the infrared illuminator on when the monocular works in the dark. Adjusting the brightness of infrared illuminator regarding to the distance of objects. Low level illuminance transducer is equipped also. If there is any light resource existed, the infrared illuminator need not to be turned on, adjusting the focal length of objective lens only. Up to 1.5 hour runtime without the use of infrared illuminator. Up to 1 hour with IR illuminator on. 3 4
Components 5 6 7 8 9 10 11 Components 12 13 14 15 16 17 18 1 - Objective Cover 2 - Objective Focus Wheel 3 Infrared Illuminator 4 - Socket Door 5 5V DC IN 6 - USB2.0 socket 7 - [AV OUT] Outlets 8 - Tripod Receptacle 9 - Battery compartment 10 - Dioptre ring 11 - Eyecup 12 - Hand Strap 13 DOWN 14 - UP 15 - Functions(for photo shooting, video shooting, videoing, playback and video output) 16 - Menu Switch (for auxiliary light and adjustment of brightness of screen) 17 - POWER/Function Check 18 - Diopter Dial 5 6 Battery Installation Power On Unscrew the battery cover and insert the battery with negative electrodes bottomed (using a coin in the groove if needed). The battery is installed correctly if the screen could be lighten up after you screw the cover back then press the Power button, if not, please double check the above steps until the viewer works normally. If the monocular doesn t work, please return it for repair after you reconfirm the battery is in good condition and the cover has been screwed down well. The model of battery shall conform to the requirements.; Ensure the electric quantity is full enough.; Note the positive and negative electrodes. Take the objective cover down. Long press#17 for 3 seconds, look through Eyecup#11, the monocular works well if the screen is lightened and icons are shown normally (Pictured at right). Icons description: 1 Battery charge indicator 2 Image Capacity Remaining 3 Current mode(photo shooting) 4 SD card in Power Off In any mode, long press #17 for 3 seconds to turn the monocular off. 7 8
Scenery Observation Remove the objective cover, in the observing (photo shooting) mode, aim the objects which need to be observed, look at the screen from Eyecup#11. 1. Adjust the diopter ring#10 to get the sharp images. 2. Adjust the objective focus wheel to get the sharpest image. Automatic fine-tuning control is operated by viewer according to the average brightness of scenery centrally. Digital zoom will be implemented by pressing #14 and #13 ranged at 1X to 8X. If the light resource is enough, turn the auxiliary light off to save the power. On the contrary, turn the auxiliary light on and then adjust the brightness to make the observation easily. Brightness Adjustment Press#16 in the observing (Photo shooting) mode. Enter the brightness adjustment menu, just as the picture at right showed, the number after Bright: means the current brightness of screen. The brightness ranged at 1 to 9 by pressing #13 and #14. Adjustment for Illumination In the observing(photo shooting and videoing) mode, press #16 * Bright: 7 Lamp: 0 Bright: 7 *Lamp: 0 twice to enter the auxiliary light adjustment menu. The index after Lamp states the brightness of auxiliary light just as the picture showed. Don t block the auxiliary light. 9 10 Press #13, #14 to adjust the infrared illuminator ranged at 0~9(9-lightest, 0-turn off). Lamp+luminan ce value will be flickered if the illustrator is opened and the menu is Lamp quitted. In any mode above, the menu will be disappeared if there is not any operation within 4 seconds. 11 12
Photo Shooting The monocular enters the observing mode automatically after starting up. Icons Instructions: 1 Battery Charge Indicator 2 Images Capacity Remaining 3 Current Mode (Photo Shooting) 4 SD card in #17 works as the shutter in this mode. Each press gets one photo. The photo will be saved automatically in the SD card. The images capacity remaining is counted by the storage of SD card. Playbacking In the observing mode, press #15 to use the playback function. Icons Instructions: 1. Battery Life 2. No. of Photos 3. Current Mode(Playback) 4. SD card in Menu Instructions: 1. Battery Life 2. Shooting Date 3. Shooting Time 4. Current No. of photo 5. Playback 6. Video Playback 7. VGA Video Format 8. SD card in 0027 SD Photo Playback 5 6 7 8 00:02:25 VGA 2012.02.02 09:12:22 0027 SD Video Playback Tips: In Playback mode, screen brightness and illuminator brightness adjustment are not allowed to use. 13 14 In the playback mode, press #13 and #14 to view the photos and videos. The playing order of photos and videos is based on the shooting order. Press #17 to play the video and repress to stop it. Tips: In photo playback mode, please don t press #17 frequently to avoid the power off. Video Shooting In the observing mode, press#15 twice to get into the video shooting mode. Menu Descriptions: 1. Battery Life 12:02:02 SD 2. Timekeeping 2012.02.02 09:12:22 3. Current Mode(Video Shooting 4. SD card in Video Shooting Press #17 to start shooting, icon 2 turns into the timekeeping and the viewer record the video automatically. In the shooting mode, the video clips will be saved in the SD card automatically. The available time is counted by the storage of SD card, the error is caused. Tips: In the video shooting, the suddenly lose power leads the error happens. The crash happens after you check the video in the playback mode. 15 16
Power Management Monitor Connection Connect the monitor to video output interface. Long press #15 for 3 seconds to switch the display on the screen of external monitor. PCs Connection The viewer is equipped with USB 2.0 interface. PC would identify the monocular automatically and read the content in the SD card. The battery would be charged by connection of PCs. The data transmission by USB connection works on the premise that the viewer must be equipped with a battery or connected with an external power supply. Auto Power Off The viewer will be turned off if there is not any operation within 3 minutes. The viewer won t be turned off automatically in the video shooting and playback mode. Battery Selection High capacity chargeable lithium-ion battery, 750mAh,3.7V Please ensure the battery would be charged for 10 hours in the first time to make it works best. The data transfers improperly if there aren t any power supplies with the monocular. The battery is in charging state when the monocular connects with PCs. 17 18 Power Management Basic Parameters External Power The monocular is equipped with external power. Plug it the DC IN 5V socket. The monocular would work continuously and won t be turned off automatically. The battery would be charged when the monocular connects with external power. Standard mobile charging source can t be used for this monocular. Battery would be charged also when the monocular connects with PC. Basic Parameters Type Items Index Magnification 5 Dimension of Objectives φ40mm FOV 5 x3.75 Optical Ocular Adjustable Performance ±0.6 Range Observing Distance(Low Light 2m~ Environment) Observing Distance(Dark ~200m Environment) 19 20
Operating Voltage 3.7V DC Lithium-ion Replaceable Battery Power rechargeable battery Charging Source 5.0V/2000mA Adapter Measurement(L*W*H)) 200ⅹ 86ⅹ 56 mm Other Weight 400g Configuration Standard Configuration Standard Items Amount AV Video Cable 1 USB Cable 1 Pouch 1 External Power Adapter 1 1 Hand Grip Strap 1 Battery 1 Cloths 1 Operating Environment Operating Environment and Announcements Keep the monocular in its soft pouch. When not in use. Operating temperature ranged at -5~40. Relative humidity is 80%. In order to avoid the wetness and mildew, please keep it in the clear and dry environment. Avoiding the great pressure and solar radiation also please. When the image jitter happens or the LCD couldn t be lighten, please charge the battery in time. Blow away the dusts before wipe the optical surface. If the monocular won t be used for a long time, please keep charge the battery occasionally to avoid the effectiveness lose. 21 22