CONTENTS. AA TM 250/425 Thermal Entrances

EFFECTIVE FEBRUARY 1, 2018 CONTENTS A9/1 CONTENTS SECTION A9...AA TM 250/425 THERMAL ENTRANCES* PAGE AA TM 250/425 BASE DOOR DOOR CHASSIS... A9/3 DOOR GLAZING/WEATHERING OPTIONS... A9/4 DOOR BOTTOM RAIL SUBSTITUTIONS... A9/5 DOOR CROSS RAIL/MUNTIN ADDITIONS... A9/5 FRAMES PACKAGES TRIFAB TM 451T FRAMES (2" x 4-1/2")... A9/6 SPECIAL FABRICATED FRAMES TRIFAB TM 451T THERMAL DOOR FRAMES (2" x 4-1/2")... A9/7 TRIFAB TM 601T/601UT DOOR FRAMES (2" x 6" THERMALLY BROKEN FRAMES)... A9/7 TRANSOM BAR/DOOR HEADER & THRESHOLD PACKAGES S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A9/8 STANDARD HINGING HARDWARE OFFSET PIVOTS... A9/9 BUTT HINGES/CONTINUOUS GEARED HINGE... A9/10 LOCKING HARDWARE STANDARD LOCKS... A9/11 MULTI-POINT LOCK ADDITIONS... A9/12 ACCESSORIES FOR STANDARD LOCKS... A9/13 EXIT DEVICE HARDWARE CONCEALED EXIT DEVICES AND ACCESSORIES... A9/14 A9/15 RIM EXIT DEVICES AND ACCESSORIES... A9/16 A9/18 STANDARD PUSH/PULLS ARCHITECTS CLASSIC PUSH/PULL SETS... A9/19 PULLS... A9/20 Continued on next page * Note: For hardware not listed in the price catalogue, consult estimating! Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.

A9/2 CONTENTS/FINISH GROUPS EFFECTIVE FEBRUARY 1, 2018 PAGE HARDWARE BY OTHERS* HINGING HARDWARE... A9/21 PIVOTING HARDWARE... A9/21 LOCKING HARDWARE... A9/22 A9/24 EXIT DEVICE HARDWARE... A9/25 A9/26 CLOSERS AND DOOR HOLDERS... A9/27 MISCELLANEOUS HARDWARE... A9/28 GROUP NO. DESIGNATION FINISHES INCLUDED #17 GRP #17 CLEAR #40 GRP #40 BRONZE #22 STD. PAINT #14 CLEAR #29 GRP #29 BLACK #18 CHAMPAGNE #26 LIGHT BRONZE #28 MEDIUM BRONZE NOTICE! Laws and building safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operation hardware, or glazing materials, and assumes no responsibility therefore. It is responsibility of the owner, the architect, and the installer to make these selections in strict conformity to all applicable laws and building codes. * Note: For hardware not listed in the price catalogue, consult estimating! Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.

EFFECTIVE FEBRUARY 1, 2018 DOOR CHASSIS A9/3 PRICE INCLUDES: 1. BLANK DOOR UP TO 3'0" X 8'0". (FOR DOORS EXCEEDING 3'6" X 8'0", CONSULT FACTORY.) 2. 1" GLASS STOPS. 3. GLAZING GASKETS. 4. DOOR BOTTOM RAIL WEATHER STRIPPING (INTERIOR AND EXTERIOR) SPECIAL DOOR PRICING ADD THE FOLLOWING: 1. BASE DOOR CHASSIS: AS LISTED BELOW: 2. HINGING HARDWARE: SELECT THE DESIRED HINGING METHOD AND ADD THE PRICE OF THE HARDWARE. 3. OPTIONS: ADD THE PRICE OF ALL OTHER OPTIONS REQUIRED FOR DOOR AND/OR FRAME, BE SURE TO ADD HARDWARE AND PREPARATION CHARGES. PART NUMBER STRUCTURE SAMPLE FOR BLANK DOORS PRODUCT CODE + HANDLE + PIVOTING + LOCKING 250 = 250 NARROW 425 = 425 WIDE S = SINGLE P = PAIR BV = BEVELED STILE OFFSET PIVOT BR = BEVELED RABBETED BH = BUTT HUNG BK = BLANK DOOR CHASSIS NARROW STILE 250 WIDE STILE 425 SINGLE PAIR SINGLE PAIR DOOR OPENING SIZE UP TO 3'0" x 8'0" 6'0" x 8'0" 3'0" x 8'0" 6'0" x 8'0" BEVELED STILES For offset pivot doors PART NO. 250SBVBK 250PBVBK 425SBVBK 425PBVBK BEVELED STILES For butt hung doors PART NO. 250SBHBK 250PBHBK 425SBHBK 425PBHBK BEVELED STILES For continuous hinge doors Use of this stile will not affect glass size PART NO. 250SBRBK 250PBRBK 425SBRBK 425PBRBK #17 GRP $950.00 $1900.00 $1312.00 $2624.00 #40 GRP $994.00 $1988.00 $1372.00 $2744.00 #29 GRP $1040.00 $2060.00 $1436.00 $2872.00 PART NUMBER SPECIAL WIDTH DOOR 031500A9 $208.00 PRICE

A9/4 DOOR GLAZING/WEATHERING OPTIONS EFFECTIVE FEBRUARY 1, 2018 Door Bottom Weathering PART NO. #17 GRP #40 GRP #29 GRP INTERIOR WEATHER SWEEPS FOR 3'0" DOOR 522795I $16.00 $18.00 $20.00 FOR 3'6" DOOR 522796I 19.00 21.00 23.00 VARIABLE TO 4'0" 522798I 22.00 24.00 26.00 FOR 6'0" PAIRS 522797I 32.00 36.00 40.00 EXTERIOR WEATHER SWEEP FOR 3'0" OFFSET PIVOT DOOR 522795P 16.00 18.00 20.00 FOR 3'6" OFFSET PIVOT DOOR 522796P 19.00 21.00 23.00 VARIABLE TO 4'0" OFFSET PIVOT DOOR 522798P 22.00 24.00 26.00 FOR 6'0" OFFSET PIVOT PAIRS 522797P 32.00 36.00 40.00 FOR 3'0" BUTT HINGE 522795B 16.00 18.00 20.00 FOR 3'6" BUTT HINGE 522796B 19.00 21.00 23.00 VARIABLE TO 4'0" BUTT HINGES 522798B 22.00 24.00 26.00 FOR 6'0" BUTT HINGE 522797B 32.00 36.00 40.00 FOR 3'0" CONTINUOUS GEAR HINGE DOOR 522795C 16.00 18.00 20.00 FOR 3'6" CONTINUOUS GEAR HINGE DOOR 522796C 19.00 21.00 23.00 VARIABLE TO 4'0" CONTINUOUS GEAR HINGE DOORS 522798C 22.00 24.00 26.00 FOR 6'0" CONTINUOUS GEAR HINGE PAIRS 522797C 32.00 36.00 40.00

EFFECTIVE FEBRUARY 1, 2018 Note: 1. All prices are per leaf unless noted otherwise. DOOR BOTTOM RAIL SUBSTITUTIONS FABRICATED PRICE A9/5 Substitute Bottom Rails PART NO. #17 GRP #40 GRP #29 GRP 3-7/8" BOTTOM RAIL IN AA TM 425 THERMAL DOOR 031550A9 DEDUCT $ (36.00) DEDUCT $ (40.00) DEDUCT $ (44.00) 6-1/2" BOTTOM RAIL IN AA TM 250 THERMAL DOOR 031551A9 201.00 259.00 310.00 10" BOTTOM RAIL IN AA TM 250 AND AA TM 425 THERMAL DOOR 031552A9 267.00 325.00 391.00 Note: 1. All prices are per foot unless noted otherwise. 2. Set charges are required with all cross rail muntins. 3. When adding cross rails to doors select push/pull sets which contain double bend (CP-II) push bars from page A9/19. PER FOOT PRICE Cross Rails PART NO. #17 GRP #40 GRP #29 GRP 1-3/8" CROSS RAIL 031553A9 $20.00/FT $28.00/FT $40.00/FT 8-1/4" CROSS RAIL 031554A9 67.00/FT 98.00/FT 115.00/FT PART NUMBER PRICE CROSS RAIL SETUP CHARGE Per rail setup charge 031534A9 $130.00

A9/6 DOOR FRAMES EFFECTIVE FEBRUARY 1, 2018 PRICE INCLUDES: 1. TRIFAB TM 451T FRAME FABRICATED. 2. FRAME WITH TRANSOM AREA (10'3-1/2") INCLUDES TRANSOM BAR, GLASS STOPS AND GASKETS FOR 1" INFILL. 3. FRAME INCLUDES THRESHOLD (STANDARD 4-19/32" WIDE THERMALLY BROKEN). 4. SELECT PUSH/PULL HARDWARE FROM PAGE A9/19. NOTE: ALL CLOSERS SOLD SEPARATELY, SELECT CLOSER FROM SECTION A3/2 TO A3/4. FRAME ONLY TRIFAB TM 451T DOOR FRAME SINGLE SINGLE PAIR PAIR DOOR OPENING 3'0" x 8'0" 3'0" x 8'0" 6'0" x 8'0" 6'0" x 8'0" PART NO. 451TS 451TSTR 451TP 451TPTR #17 GROUP $505.00 $788.00 $619.00 $851.00 #40 GROUP 528.00 824.00 647.00 890.00 #29 GROUP 553.00 862.00 679.00 931.00

EFFECTIVE FEBRUARY 1, 2018 SPECIAL FABRICATED FRAMES A9/7 PRICE INCLUDES: 1. FABRICATION OF DOOR FRAMES. 2. APPLICABLE GLASS STOPS AND DOOR STOPS. 3. GLAZING GASKETS. 4. FRAME CLIPS & SCREWS (JOINT CHARGES INCLUDED). 5. FRAMING IS FACTORY FABRICATED AND SHIPPED K.D. NOT INCLUDED: 1. PERIMETER FASTENERS OR PREPARATION. 2. PERIMETER RECEPTORS OR SILL FLASHING. 3. BRAKES OR SPECIAL FILLERS. 4. SASH OR SASH ATTACHMENT. 5. ASSEMBLY OF FRAME. PRICING NOTES: 1. DETERMINE THE TOTAL LINEAR FEET OF FRAMING REQUIRED AND MULTIPLY BY THE LINEAR PER FOOT CHARGE OF THE FRAMING MEMBERS YOU SELECT (TO THE NEXT LARGER FOOT). 2. ADD THE FRAME PREPARATION CHARGES FOR ANY OPTIONS REQUIRED. 3. CONSULT ARCHITECTURAL DETAILS FOR STRUCTURAL LIMITATIONS. 4. FOR JOINTS OTHER THAN 90, CONTACT THE FACTORY FOR PRICING. Trifab TM 451T Thermal Door Frames (2" x 4-1/2") Special Moldings Door Jamb (Thermal) Header/ T-Bar (3) (Thermal) Transom Head Shear Block Transom Head (3) (Non-Thermal) 522125 4-19/32" Threshold PART NO. 4529120A9 4529121A9 4529118A9 4529136A9 4529145A9 #17 GRP $33.84 $30.40 $13.52 $25.53 #40 GRP 35.38 31.79 14.14 26.87 #29 GRP 38.72 34.78 15.47 30.09 $19.22 (#10 Mill) Trifab TM 601T/601UT Thermal Door Frames (2" x 6") Special Moldings Door Jamb (1) (2-1/4" Door Depth) Header/ T-Bar (2) (2-1/4" Door Depth) Head (Outside Glazed) Head (Inside Glazed) Head (Outside Glazed) Head (Inside Glazed) Transom Head (Non-Thermal) (2-1/4" Door Depth) 4-19/32" Std. Threshold Optional 6-3/4" Threshold PART NO. 601UT9137A9 601UT9138A9 601T9134A9 601T9135A9 601UT9134A9 601UT9135A9 6019136A9 4529145A9 4509146A9 #17 GRP $38.96 $34.96 $21.66 $24.10 $22.96 $25.55 $32.74 #40 GRP 44.41 39.85 24.69 27.47 26.17 29.13 34.46 #29 GRP 48.86 43.84 27.16 30.22 28.79 32.04 38.59 $19.22 (#10 Mill) (1) DOOR JAMB WITH NON-CONDUCTIVE DOOR STOP WITH ALUMINUM SNAP-ON COVER FOR 2-1/4" DOOR DEPTHS. (2) T-BAR /HEADER WITH NON-CONDUCTIVE DOOR STOP WITH ALUMINUM SNAP-ON COVER FOR 2-1/4" DOOR DEPTHS AND SURFACE MOUNTED CLOSERS. (3) TO SUBSTITUTE SILICONE SETTING BLOCKS, USE PART NUMBER 138018A9, AND ADD $4.40 PER FOOT. $10.02 (#10 Mill)

A9/8 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD EFFECTIVE FEBRUARY 1, 2018 Price includes: Fabricated header/transom bar, glass stops, mounting trays, horizontal door stop and weathering, frame clips, tray clips, threshold and screws. Select concealed overhead closer from page A3/4. Select closer arm from page A3/6. Maximum door sizes: 3'0" x 8'0" or 3'6" x 7'6". Minimum door width: 2'6". It is necessary that the customer inform Kawneer of any project conditions that will have an impact on closer strength selection. Standard closer selection will apply if no such information is supplied. Center hung door applications are not available. S/A Offset Arm in TRIFAB TM VG 451 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package Offset pivot Butt hung Continuous gear S/A Offset Arm Transom Package Offset pivot Butt hung Continuous gear Part No. #17 GRP #40 GRP #29 GRP Part No. #17 GRP #40 GRP #29 GRP 451650A9 RH 451651A9 LH 451660A9 RH 451661A9 LH 451655A9 RH 451656A9 LH 451665A9 RH 451666A9 LH $248.00 $261.00 $293.00 451654A9 $323.00 $340.00 $381.00 $253.00 $266.00 $298.00 451664A9 $328.00 $345.00 $387.00 $253.00 $266.00 $298.00 451659A9 $328.00 $347.00 $387.00 $266.00 $270.00 $303.00 451669A9 $334.00 $351.00 $394.00 S/A Offset Arm in TRIFAB TM 601 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package Offset pivot Butt hung Continuous gear S/A Offset Arm Transom Package Offset pivot Butt hung Continuous gear Special Size Charge: No charge - for single transom/header packages under 3'0", 150656A9 (NO CHARGE). Add - for single transom/header packages over 3'0" up to 3'6", 150657A9 $22.00. Add - for pairs transom/header packages over 6'0", 150658A9 $45.00. Prep Charge: To prep for concealed rod exit device, use part number 138651A9 and add $35.00. To prep for 3-point lock use part number 138135A9 and add $30.00. Part No. #17 GRP #40 GRP #29 GRP Part No. #17 GRP #40 GRP #29 GRP 601650A9 RH 601651A9 LH 601660A9 RH 601661A9 LH 601655A9 RH 601656A9 LH 601665A9 RH 601666A9 LH $297.00 $339.00 $373.00 601654A9 $388.00 $442.00 $486.00 $304.00 $347.00 $382.00 601664A9 $394.00 $449.00 $494.00 $304.00 $347.00 $382.00 601659A9 $420.00 $442.00 $494.00 $319.00 $364.00 $400.00 601669A9 $426.00 $448.00 $502.00 Optional: Delete threshold, use part 031100A9 and delete $(21.00) Single. Delete threshold, use part 031101A9 and delete $(38.00) Pair.

EFFECTIVE FEBRUARY 1, 2018 OFFSET PIVOTS A9/9 Note: 1. Refer to the general information section for hardware color combinations. Rule of Thumb for Adding Intermediate Pivots Door Height Over 7'6" Intermediate Add One (1) Pivot Offset Pivots Part No. #17 #40 #29 Top offset pivot (4) (Kawneer standard) Bottom offset pivot (4) (For use with threshold) Bottom offset pivot (4) (For use without threshold) Intermediate offset pivot (4) (Kawneer standard) Price HARDWARE + DOOR PREP 138410A9 $23.00 $24.00 $27.00 FRAME PREP 138411A9 15.00 HARDWARE + DOOR PREP 138412A9 25.00 26.00 30.00 FRAME PREP 138413A9 15.00 HARDWARE + DOOR PREP 138414A9 25.00 25.00 25.00 (4, 5) Intermediate electric transfer offset pivot (Kawneer standard) (Wiring prep not included) Intermediate offset pivot (optional) (Rixson M-19 of IVES 7215) EL Intermediate offset pivot (optional) (Rixson M-19 of IVES 7215) (Includes offset pivot and wiring harness) HARDWARE + DOOR PREP 138210A9 168.00 176.00 198.00 FRAME PREP 138211A9 35.00 HARDWARE + DOOR PREP (INCLUDES OFFSET PIVOT & WIRING HARNESS) 138431A9(RH) 138432A9(LH) 582.00 590.00 600.00 FRAME PREP 138211A9 35.00 HARDWARE + DOOR PREP 138415A9 332.00 350.00 --- FRAME PREP 138416A9 115.00 HARDWARE + DOOR PREP (RH) 138433A9 734.00 734.00 --- HARDWARE + DOOR PREP (LH) 138434A9 734.00 734.00 --- FRAME PREP 138416A9 115.00 (4) Offset Pivot Paint Charge PER DOOR PAINT CHARGE 138035A9 125.00 (5) For eight wire electric transfer consult factory.

A9/10 BUTT HINGES/CONTINUOUS GEARED HINGE EFFECTIVE FEBRUARY 1, 2018 Note: Prices for hardware listed are per item. Example: Select (3) butt hinges to receive 1-1/2 pairs of butts per leaf on a single door. Price Butt Hinges Part No. #17 #40 #29 4-1/2" x 4" 304 Stainless Steel with N.R.P. (Rounded corners) 4-1/2" x 4" N.R.P. Stainless Steel Ball Bearing Hinge (US 32D) (Rounded corners) 4-1/2" x 4" Electric Transfer (5) (Rounded corners) (Wiring prep not included) Hardware + door prep (Includes hinge & wiring harness) HARDWARE + DOOR PREP 138408A9 $65.00 --- $69.00 FRAME PREP 138418A9 36.00 HARDWARE + DOOR PREP 031219A9 114.00 (US 32D) FRAME PREP 138418A9 36.00 HARDWARE + DOOR PREP (INCLUDES OFFSET PIVOT & WIRING HARNESS) 138430A9 522.00 --- 530.00 FRAME PREP 138418A9 36.00 Continuous Geared Hinge Part No. #17 #40 #29 Price Up to 7'0" HARDWARE + DOOR PREP 138420A9 $340.00 $411.00 $471.00 Up to 8'0" HARDWARE + DOOR PREP 138421A9 384.00 473.00 545.00 FRAME PREP 138429A9 50.00 (5) For eight wire electric transfer consult factory. Rule of Thumb for Adding Intermediate Pivots Door Height Intermediate All Doors Add One (1) Hinge Over 7'3" Add Two (2) Hinges

EFFECTIVE FEBRUARY 1, 2018 STANDARD LOCKS A9/11 1. Locking options do not include the cylinders or lock operators. Select cylinders and lock operators separately. 2. Backset for all locks listed on this page is 1-1/8". 3. Refer to the general information section for hardware color combinations. Price Locking Hardware Options Part No. #17 #40 #29 Standard Adams Rite MS 1850 Lock (Rounded corners) HARDWARE + DOOR PREP 138101A9 $37.00 $41.00 $45.00 Single FRAME PREP 138102A9 25.00 HARDWARE + DOOR PREP 138103A9 46.00 50.00 54.00 Pair FRAME PREP --- --- Adams Rite MS 1850 Hookbolt Lock HARDWARE + DOOR PREP 138106A9 50.00 53.00 57.00 Single FRAME PREP 138107A9 25.00 Adams Rite 4510 Latch Lock HARDWARE + DOOR PREP 138120A9 300.00 315.00 355.00 Single FRAME PREP 138121A9 45.00 Adams Rite MS+1890 Deadbolt Latch Lock HARDWARE + DOOR PREP 138124A9 474.00 500.00 562.00 Single FRAME PREP 138125A9 75.00 Adams Rite MS 2190 Deadbolt Latch Lock (The MS 2190 requires the use of CO12 Pulls, select the correct push/ pull combinations from A9/18-19.) HARDWARE + DOOR PREP 138402A9 572.00 598.00 660.00 Single FRAME PREP 138403A9 75.00 Kawneer Flush Bolts* (For use on pairs of doors with MS & latch locks) Price includes: One (1) pair of flush bolts. HARDWARE + DOOR PREP 138128A9 50.00 54.00 58.00 FRAME PREP 138135A9 30.00 *Some building codes, with some qualifications, prohibit the use of manual flush bolts on exit doors needed to handle the occupant load of the building. Please consult with your local code to verify the use of manual flush bolts for your specific application.

A9/12 MULTI-POINT LOCK ADDITIONS EFFECTIVE FEBRUARY 1, 2018 1. 3-point locking option does not include the MS lock, cylinders or lock operators. Select MS 1850 lock, cylinders and lock operators sold separately. 2. Backset for all locks listed on this page 1-1/8". Multi-point Locking Hardware Options Part No. Price Adams Rite 4015 two point lock (For use in single or pairs of doors.) Includes conversion kit for standard MS 1850 lock to 2-point lock. Adams Rite 4015 & 4016 + three point lock (For use on single or pairs of doors. When used on pairs inactive leaf requires Kawneer Flush Bolts.) Includes conversion kit for standard MS 1850 lock to 3-point lock. HARDWARE + DOOR PREP 138130A9 $200.00 FRAME PREP 138131A9 30.00 HARDWARE + DOOR PREP 138109A9 292.00 FRAME PREP 138119A9 30.00

EFFECTIVE FEBRUARY 1, 2018 ACCESSORIES FOR STANDARD LOCKS A9/13 Note: 1. Refer to the general information section for hardware color combinations. Accessories for use with Locking Hardware Options on Page A9/11 Price Part No. #17 #40 #29 Adams Rite 4560 Lever Handle (For use on 4510 Latch Lock, and MS+1890 & 2190 Deadbolt Latch Locks) Standard 3-1/2" handle. Single Only HARDWARE + DOOR PREP 031517A9 $110.00 $110.00 $110.00 Adams Rite 4590 Latch Paddle (For use on 4510 Latch Lock, and MS+1890 & 2190 Deadbolt Latch Locks) Optional paddle. Single Only HARDWARE + DOOR PREP 031518A9 168.00 168.00 168.00 Adams Rite 7130 Electric Strike (For use on 4510 latch locks only.) Note: Intermediate electric transfer offset pivot, on page A9/9. 4-1/2" x 4" electric transfer butt hinge, on page A9/10. HARDWARE ONLY CONTINUOUS DUTY (NO DOOR PREP) 138249A9 360.00 HARDWARE ONLY (NO DOOR PREP) INTERMITTENT DUTY 138242A9 360.00 Single Only FRAME PREP 138243A9 104.00 MS Cylinder Guard (For exterior use only with Kawneer standard cylinders.) Note: N/A with exit devices. Cylinder for MS & Latch Locks Price includes: 1. Hardware + door prep. Thumbturn for MS Locks Cylinder for MS & Latch Locks Price includes: 1. Hardware + door prep. HARDWARE + DOOR PREP 138224A9 70.00 70.00 70.00 KEYED INDIVIDUALLY 138670A9 9.00 9.00 9.00 KEYED ALIKE (in groups of 50) 138672A9 9.00 9.00 9.00 031520A9 35.00 41.00 47.00 KEYED IN PAIRS (back to back) 031519A9 39.00 39.00 39.00 KEYED ALIKE (in groups of 50) 031536A9 39.00 39.00 39.00

A9/14 CONCEALED EXIT DEVICES AND ACCESSORIES EFFECTIVE FEBRUARY 1, 2018 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf. For special size concealed exit device use part 031521A9 and add $100.00 list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Kawneer Concealed Rod Exit Device Kawneer 1686 Concealed Rod Exit Device Exit device with hex-key dogging Kawneer 1686 Concealed Rod Exit Device Exit device with cylinder dogging Kawneer 1686 Lever Handle Price HARDWARE + DOOR PREP 138645A9 $520.00 $535.00 FRAME PREP 138646A9 35.00 HARDWARE + DOOR PREP 138645CDA9 630.00 650.00 FRAME PREP 138646A9 35.00 HARDWARE + DOOR PREP 138845A9 220.00 227.00 --- Cylinder KEYED INDIVIDUALLY 138670A9 9.00 9.00 9.00 Cylinder with mounting pad for Exit Devices (For use with Kawneer 1686 exit device) KEYED ALIKE (in groups of 50) 138672A9 9.00 9.00 9.00 DUMMY CYLINDER 138683A9 6.00 6.00 6.00 Falcon Concealed Rod Exit Device Falcon 1690 Exit Device Exit device. Falcon 1990 Concealed Rod Exit Device Crash bar exit device. Cylinder for Exit Devices (For use with Falcon 1690, 1990 and 2090 exit devices) KEYED INDIVIDUALLY 138643A9 50.00 50.00 --- KEYED ALIKE (in groups of 50) 138644A9 50.00 50.00 --- HARDWARE + DOOR PREP 031522A9 625.00 640.00 730.00 FRAME PREP 138651A9 35.00 HARDWARE + DOOR PREP 031523A9 625.00 640.00 730.00 FRAME PREP 138651A9 35.00 KEYED INDIVIDUALLY 031524A9 12.00 12.00 12.00 KEYED ALIKE (in groups of 50) 031525A9 12.00 12.00 12.00

EFFECTIVE FEBRUARY 1, 2018 CONCEALED EXIT DEVICES AND ACCESSORIES A9/15 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Price are for a 3'0" x 7'0" door leaf. For special size concealed exit device use part 031521A9 and add $100.00 list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Von Duprin Concealed Rod Exit Device Von Duprin 3347A Concealed Rod Exit Device Exit Device (For use on AA TM 250 & AA TM 425 pairs only) Von Duprin 3347A Night Latch Cylinder Assembly (For use on AA TM 250 & AA TM 425 pairs only) Von Duprin 9947 Concealed Rod Exit Device Exit Device (For use on AA TM 425 only) Von Duprin 9947 Night Latch Cylinder Assembly HARDWARE + DOOR PREP 138084A9 US28 $2514.00 Price 313 $2776.00 FRAME PREP 138085A9 35.00 HARDWARE + DOOR PREP HARDWARE + DOOR PREP 138086A9 138089A9 US26D 350.00 US28 2408.00 US10B 350.00 313 2590.00 FRAME PREP 138090A9 35.00 315 $3602.00 SPBLK 350.00 315 3442.00 Adams Rite Concealed Rod Exit Device (For use on AA TM 425 only) Cylinder for Exit Device (For use with Von Duprin 33 & 99) Hardware and door prep. Adams Rite 8600 Concealed Exit Device HARDWARE + DOOR PREP KEYED INDIVIDUALLY Escutcheon Plate Cylinder Guard (For use with Adams Rite 8600 concealed exit devices, when cylinder is required.) Cylinder for Adams Rite 8600 Price includes: Hardware and door prep. 138091A9 138087A9 US26D 172.00 626 82.00 US10B 172.00 SPBLK 172.00 613 82.00 --- HARDWARE + DOOR PREP 031526A9 623.00 699.00 783.00 FRAME PREP 031826A9 35.00 HARDWARE + DOOR PREP 031819A9 50.00 50.00 50.00 KEYED INDIVIDUALLY 138670A9 9.00 9.00 9.00 KEYED ALIKE (in groups of 50) 138672A9 9.00 9.00 9.00

A9/16 RIM EXIT DEVICES AND ACCESSORIES EFFECTIVE FEBRUARY 1, 2018 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size exit devices use part 031527A9 and add $85.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Kawneer Rim Exit Device Kawneer 1786 Rim Exit Device Rim exit device with hex-key dogging. Kawneer 1786 Rim Exit Device Rim exit device with cylinder dogging. Kawneer 1786 Lever Handle Price HARDWARE + DOOR PREP 138835A9 $398.00 $415.00 FRAME PREP (Single Door) 138836A9 35.00 HARDWARE + DOOR PREP 138835CDA9 553.00 573.00 FRAME PREP (Single Door) 138836A9 35.00 HARDWARE + DOOR PREP 138846A9 220.00 227.00 --- Cylinder KEYED INDIVIDUALLY 138670A9 9.00 9.00 9.00 RM-86 Removable Mullion Maximum height of 8'0" KEYED ALIKE (in groups of 50) 138672A9 9.00 9.00 9.00 DUMMY CYLINDER 138683A9 6.00 6.00 6.00 For Kawneer 1786 Exit Device UP TO 7'0" HARDWARE 133586A9 904.00 940.00 Cylinder for Exit Devices (For use with Kawneer 1786 exit devices) UP TO 8'0" HARDWARE 133587A9 926.00 962.00 UP TO 10'0" HARDWARE 133589A9 952.00 990.00 FRAME PREP 138837A9 170.00 KEYED INDIVIDUALLY 031524A9 12.00 12.00 12.00 KEYED ALIKE (in groups of 50) 031525A9 12.00 12.00 12.00

EFFECTIVE FEBRUARY 1, 2018 RIM EXIT DEVICES AND ACCESSORIES A9/17 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size exit devices use part 031527A9 and add $85.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Falcon Rim Exit Device Falcon 1790 Exit Device Exit device. HARDWARE + DOOR PREP 031528A9 528.00 560.00 590.00 FRAME PREP (Single Door) 138655A9 35.00 Falcon 2090 Rim Exit Device Crash bar exit device. (See page A9/14 for cylinder) HARDWARE + DOOR PREP 031529A9 528.00 560.00 590.00 FRAME PREP (Single Door) 138655A9 35.00 Falcon RM-170/RM-70 Removable Mullion (For use with pairs for 1790 & 2090 rim exit devices.) Price includes (2) interlocking mullions stabilizers maximum height of 8'0". RM-170 for 1790 exit device UP TO 7'0" HARDWARE 133486A9 850.00 880.00 982.00 UP TO 8'0" HARDWARE 133487A9 985.00 1015.00 1132.00 FRAME PREP 138658A9 170.00 RM-70 for 2090 exit device UP TO 7'0" HARDWARE 033542A9 850.00 880.00 982.00 UP TO 8'0" HARDWARE 033543A9 985.00 1015.00 1132.00 FRAME PREP 138658A9 170.00 Cylinder for Exit Devices (For use with Falcon 1790 and 2090 exit devices) Price KEYED INDIVIDUALLY 031524A9 12.00 12.00 12.00 KEYED ALIKE (in groups of 50) 031525A9 12.00 12.00 12.00

A9/18 RIM EXIT DEVICES AND ACCESSORIES EFFECTIVE FEBRUARY 1, 2018 1. Select pull handles from page A9/19. 2. Refer to the general information section for hardware color combinations. 3. Price are for a 3'0" wide door leaf. For special size rim exit device use part 031532A9 and add $50.00 list per leaf. Adams Rite Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Part No. #17 #40 #29 Adams Rite Rim Exit Device Adams Rite 8400 Rim Exit Device (Single door only.) Cylinder for Adams Rite 8400 Price includes: Hardware and door prep. Price HARDWARE + DOOR PREP 031533A9 $690.00 $768.00 $852.00 FRAME PREP 031829A9 35.00 KEYED INDIVIDUALLY 138670A9 9.00 9.00 9.00 KEYED ALIKE (in groups of 50) 138672A9 9.00 9.00 9.00

EFFECTIVE FEBRUARY 1, 2018 ARCHITECTS CLASSIC PUSH/PULL SETS A9/19 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Architects Classic Push/Pull Sets Style CO-9/CP Style CO-12/CP Style CP Push Bars (2) Style CO-9/CP-II Not for use on D/A doors. Style CO-12/CP-II Not for use on D/A doors. Style CP-II Push Bars (2) Not for use on D/A doors. Style CO-9/CO-9 Style CO-12/CO-12 (Note: Contact factory for mounting location of the CO12/CO12 and lock.) Finish Group Part No. NO. 1 NO. 2 NO.3 = 3'0" 137703PA9 $74.00 $192.00 $304.00 = 3'6" 137704PA9 87.00 214.00 319.00 VAR. TO 4'0" 137705PA9 97.00 231.00 344.00 = 3'0" 137709PA9 89.00 204.00 305.00 = 3'6" 137710PA9 100.00 227.00 335.00 VAR. TO 4'0" 137711PA9 110.00 243.00 360.00 = 3'0" 137718PA9 82.00 235.00 365.00 = 3'6" 137719PA9 102.00 275.00 422.00 VAR. TO 4'0" 137720PA9 121.00 307.00 469.00 = 3'0" 137700PA9 73.00 183.00 303.00 = 3'6" 137701PA9 87.00 220.00 329.00 VAR. TO 4'0" 137702PA9 274.00 552.00 668.00 = 3'0" 137706PA9 91.00 211.00 320.00 = 3'6" 137707PA9 100.00 230.00 345.00 VAR. TO 4'0" 137708PA9 287.00 564.00 685.00 = 3'0" 137715PA9 91.00 250.00 397.00 = 3'6" 137716PA9 103.00 229.00 443.00 VAR. TO 4'0" 137717PA9 382.00 737.00 907.00 PER LEAF 137725PA9 58.00 132.00 207.00 PER LEAF 137726PA9 89.00 170.00 246.00 Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47

A9/20 PULLS EFFECTIVE FEBRUARY 1, 2018 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Pulls Style CO-9 For one (1) style CO-9 pull handle. Style CO-12 For one (1) style CO-12 pull handle. Finish Group Part No. NO. 1 NO. 2 NO.3 137730PA9 $35.00 $72.00 $107.00 137731PA9 56.00 96.00 131.00 Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47

EFFECTIVE FEBRUARY 1, 2018 HINGING AND PIVOTING HARDWARE A9/21 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. BUTT HINGES (per hinge) STANDARD 4-1/2" x 4" TEMPLATE BUTT HINGE PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139001A9 $106.00 FABRICATION FOR DOOR 139001DPA9 42.00 FABRICATION FOR FRAME 139001FPA9 42.00 HARDWARE APPLICATION 139001HAA9 22.00 ALL OTHER BUTT HINGES COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139002A9 148.00 FABRICATION FOR DOOR 139002DPA9 63.00 FABRICATION FOR FRAME 139002FPA9 63.00 HARDWARE APPLICATION 139002HAA9 22.00 ANCHOR HINGE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139003A9 336.00 FABRICATION FOR DOOR 139003DPA9 125.00 FABRICATION FOR FRAME 139003FPA9 167.00 HARDWARE APPLICATION 139003HAA9 44.00 CONTINUOUS HINGES CONTINUOUS HINGE - UP TO 8'0" DOOR PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139004A9 $200.00 FABRICATION FOR DOOR 139004DPA9 75.00 FABRICATION FOR FRAME 139004FPA9 75.00 HARDWARE APPLICATION 139004HAA9 50.00 OFFSET PIVOTS TOP OFFSET PIVOT PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139005A9 $117.00 FABRICATION FOR DOOR 139005DPA9 54.00 FABRICATION FOR FRAME 139005FPA9 54.00 HARDWARE APPLICATION 139005HAA9 9.00 INTERMEDIATE PIVOT COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139006A9 252.00 FABRICATION FOR DOOR 139006DPA9 115.00 FABRICATION FOR FRAME 139006FPA9 115.00 HARDWARE APPLICATION 139006HAA9 22.00 BOTTOM OFFSET PIVOT COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139007A9 254.00 FABRICATION FOR DOOR 139007DPA9 104.00 FABRICATION FOR FRAME 139007FPA9 83.00 HARDWARE APPLICATION 139007HAA9 67.00

A9/22 LOCKING HARDWARE EFFECTIVE FEBRUARY 1, 2018 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. LOCKING DEADLOCK ON SINGLE DOOR PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031560A9 $132.00 FABRICATION FOR DOOR 031560DPA9 67.00 FABRICATION FOR FRAME 031560FPA9 42.00 HARDWARE APPLICATION 031560HAA9 23.00 DEADLOCK ON PAIR OF DOORS COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031561A9 104.00 FABRICATION FOR DOOR 031561DPA9 81.00 FABRICATION FOR FRAME N/A HARDWARE APPLICATION 031561HAA9 23.00 DEADLOCK WITH 3-POINT LOCK COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031562A9 176.00 FABRICATION FOR DOOR 031562DPA9 81.00 FABRICATION FOR FRAME 031562FPA9 49.00 HARDWARE APPLICATION 031562HAA9 46.00 CYLINDER GUARD COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139055A9 17.00 FABRICATION FOR DOOR 139055DPA9 13.00 FABRICATION FOR FRAME N/A HARDWARE APPLICATION 139055HAA9 4.00 ARMORED STRIKE ON SINGLE DOOR (DOES NOT INCLUDE APPROPRIATE DEADLOCK PREP) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139056A9 22.00 FABRICATION FOR DOOR N/A FABRICATION FOR FRAME 139056FPA9 13.00 HARDWARE APPLICATION 139056HAA9 9.00

EFFECTIVE FEBRUARY 1, 2018 LOCKING HARDWARE A9/23 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. LATCH LOCKS MS + 1890 LATCH LOCK ON SINGLE DOOR PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031563A9 $184.00 FABRICATION FOR DOOR 031563DPA9 67.00 FABRICATION FOR FRAME 031563FPA9 75.00 HARDWARE APPLICATION 031563HAA9 67.00 LATCH LOCK ON SINGLE DOOR (LEVER OR PADDLE) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031565A9 185.00 FABRICATION FOR DOOR 031565DPA9 72.00 FABRICATION FOR FRAME 031565FPA9 67.00 HARDWARE APPLICATION 031565HAA9 46.00

A9/24 LOCKING HARDWARE EFFECTIVE FEBRUARY 1, 2018 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. MISCELLANEOUS LOCKS MS 1870 CYLINDER OPERATED FLUSH BOLT PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031567A9 $161.00 FABRICATION FOR DOOR 031567DPA9 67.00 FABRICATION FOR FRAME 031567FPA9 48.00 HARDWARE APPLICATION 031567HAA9 67.00 MS 1880 TWO POINT LOCK COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031568A9 141.00 FABRICATION FOR DOOR 031568DPA9 67.00 FABRICATION FOR FRAME 031568FPA9 40.00 HARDWARE APPLICATION 031568HAA9 44.00 BOTTOM RAIL LOCK COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031569A9 252.00 FABRICATION FOR DOOR 031569DPA9 188.00 FABRICATION FOR FRAME 031569FPA9 42.00 HARDWARE APPLICATION 031569HAA9 23.00 CYLINDRICAL LOCKS CYLINDRICAL LOCK SET ON SINGLE DOOR (BORED OR MORTISE) PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031570A9 $220.00 FABRICATION FOR DOOR 031570DPA9 116.00 FABRICATION FOR FRAME 031570FPA9 29.00 HARDWARE APPLICATION 031570HAA9 111.00

EFFECTIVE FEBRUARY 1, 2018 EXIT DEVICE HARDWARE A9/25 1. All prices are per item. 2. Prices do not include exit device trim prep. Pick up appropriate exit device trim prep. 3. Part numbers do not imply hardware/door/frame compatibility. 4. Verify all hardware applications and combinations with an appropriate hardware consultant. 5. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. CONCEALED EXIT DEVICE FALCON CONCEALED ROD EXIT DEVICE PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031572A9 $422.00 FABRICATION FOR DOOR 031572DPA9 241.00 FABRICATION FOR FRAME 031572FPA9 82.00 HARDWARE APPLICATION 031572HAA9 133.00 VON DUPRIN CONCEALED ROD EXIT DEVICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031573A9 498.00 FABRICATION FOR DOOR 031573DPA9 281.00 FABRICATION FOR FRAME 031573FPA9 96.00 HARDWARE APPLICATION 031573HAA9 178.00 ALL OTHER CONCEALED ROD EXIT DEVICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031574A9 669.00 FABRICATION FOR DOOR 031574DPA9 325.00 FABRICATION FOR FRAME 031574FPA9 163.00 HARDWARE APPLICATION 031574HAA9 266.00 RIM EXIT DEVICE ALL RIM EXIT DEVICES PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031575A9 $499.00 FABRICATION FOR DOOR 031575DPA9 241.00 FABRICATION FOR FRAME 031575FPA9 159.00 HARDWARE APPLICATION 031575HAA9 99.00 MORTISE EXIT DEVICE ALL MORTISE EXIT DEVICES PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031576A9 $587.00 FABRICATION FOR DOOR 031576DPA9 325.00 FABRICATION FOR FRAME 031576FPA9 81.00 HARDWARE APPLICATION 031576HAA9 181.00 SURFACE ROD EXIT DEVICES ALL SURFACE ROD EXIT DEVICES PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031577A9 $578.00 FABRICATION FOR DOOR 031577DPA9 325.00 FABRICATION FOR FRAME 031577FPA9 72.00 HARDWARE APPLICATION 031577HAA9 181.00

A9/26 EXIT DEVICE HARDWARE EFFECTIVE FEBRUARY 1, 2018 1. All prices are per item. 2. Prices do not include exit device. Pick up appropriate exit device trim prep. 3. Part numbers do not imply hardware/door/frame compatibility. 4. Verify all hardware applications and combinations with an appropriate hardware consultant. 5. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. EXIT DEVICE TRIMS FALCON EXIT DEVICE TRIMS PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031578A9 $51.00 FABRICATION FOR DOOR 031578DPA9 31.00 FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION 031578HAA9 22.00 VON DUPRIN EXIT DEVICE TRIMS COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031579A9 56.00 FABRICATION FOR DOOR 031579DPA9 36.00 FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION 031579HAA9 22.00 ADAMS RITE EXIT DEVICE TRIMS COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031580A9 56.00 FABRICATION FOR DOOR 031580DPA9 36.00 FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION 031580HAA9 22.00

EFFECTIVE FEBRUARY 1, 2018 CLOSERS AND DOOR HOLDERS A9/27 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. CONCEALED OVERHEAD CLOSERS (DOES NOT INCLUDE HINGING PREP, MAY REQUIRE A SPECIAL TOP RAIL AND AFFECT GLASS) SINGLE ACTING ARM PREP PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031581A9 $279.00 FABRICATION FOR DOOR 031581DPA9 89.00 FABRICATION FOR FRAME 031581FPA9 168.00 HARDWARE APPLICATION 031581HAA9 22.00 SINGLE ACTING CLOSER PREP COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139012A9 199.00 FABRICATION FOR DOOR N/A FABRICATION FOR FRAME 139012FPA9 168.00 HARDWARE APPLICATION 139012HAA9 31.00 FLOOR CLOSERS (DOES NOT INCLUDE HINGING PREP) OFFSET PIVOT CLOSER ARM FABRICATION PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139015A9 $136.00 FABRICATION FOR DOOR 139015DPA9 105.00 FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION 139015HAA9 31.00 DOOR HOLDERS (MAY REQUIRE A SPECIAL TOP RAIL AND AFFECT GLASS SIZE) SURFACE HOLDER PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139017A9 184.00 FABRICATION FOR DOOR 139017DPA9 83.00 FABRICATION FOR FRAME 139017FPA9 83.00 HARDWARE APPLICATION 139017HAA9 18.00

A9/28 MISCELLANEOUS HARDWARE EFFECTIVE FEBRUARY 1, 2018 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. MISCELLANEOUS HARDWARE FLUSHBOLTS (PER PAIR) PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139018A9 $94.00 FABRICATION FOR DOOR 139018DPA9 42.00 FABRICATION FOR FRAME 139018FPA9 30.00 HARDWARE APPLICATION 139018HAA9 22.00 NON-STANDARD PUSH PULL COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 031583A9 54.00 FABRICATION FOR DOOR 031583DPA9 31.00 FABRICATION FOR FRAME N/A HARDWARE APPLICATION 031583HAA9 23.00 VON DUPRIN POWER TRANSFER COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139020A9 134.00 FABRICATION FOR DOOR 139020DPA9 67.00 FABRICATION FOR FRAME 139020FPA9 67.00 HARDWARE APPLICATION N/A STANDARD ELECTRIC STRIKE ON SINGLE DOOR (AR 7130 / HES 7089) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139021A9 126.00 FABRICATION FOR DOOR N/A FABRICATION FOR FRAME 139021FPA9 104.00 HARDWARE APPLICATION 139021HAA9 22.00 ALL OTHER ELECTRIC STRIKES ON SINGLE DOOR COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139023A9 140.00 FABRICATION FOR DOOR N/A FABRICATION FOR FRAME 139023FPA9 104.00 HARDWARE APPLICATION 139023HAA9 36.00 MAGNETIC LOCK (SURFACE APPLIED - PER LEAF) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139026A9 144.00 FABRICATION FOR DOOR 139026DPA9 42.00 FABRICATION FOR FRAME 139026FPA9 71.00 HARDWARE APPLICATION 139026HAA9 31.00 MAGNETIC LOCK (CONCEALED - PER LEAF) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION 139027A9 357.00 FABRICATION FOR DOOR 139027DPA9 188.00 FABRICATION FOR FRAME 139027FPA9 125.00 HARDWARE APPLICATION 139027HAA9 44.00