Max. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot

Similar documents
General Information. Up to 31.5 MPa (4570 PSI), 1100L/min (291 U.S.GPM)

4SA0/4SB0 Series Applicable cylinder bore size: ø6 to ø25

Discrete valve: Body porting 3, 5 port pilot operated valve 3KA1/4KA1/2/3/4 Series

4/3, 4/2 and 3/2 directional valve. with mechanical,manual operation. Type WMM16, 25 and 32. Contents. Features 01/08 2.5

Directional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents. RE Edition: Replaces: 07.

2-way cartridge valves; pressure functions

Ex-proof proportional directional valves Direct operated, without transducer, with positive spool overlap - ATEX, IECEx, EAC or CULUS

Directional spool valves type WMM16 hand lever

Options Dedicated Bellows Dedicated Bellows For the supported models, see the table of options by model number on

Installation Instructions for the TBVL Valve Set GOLD/COMPACT

QEL 33A/35A, 98/99 Series

NOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application.

McAfee Network Security Platform

RAC06 2D, RAC06 4D, RAC10 2D, RAC10 4D, RAC16 4D, RAC16 8D. RoHS COMPLIANCE ITEM Halogen and Antimony Free

Royal RVHV Retrofit Kit

Low-Voltage Controls and Distribution

Welch Allyn CardioPerfect Workstation Installation Guide

1500W Programmable Single Output

POWER COMBICON spring-cage connector 7.62 mm pitch SPC 5/...-ST(F)-7,62

Dixie Narco Retrofit Kit

Compact Valves - PVL Series

1500W Programmable Single Output 15V 24V 30V 36V 48V 60V 100A 62.5A 50A 41.7A 31.3A 25A. ±5.0% Typical adjustment by potentiometer.

PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE

NetBackup 5200 Release 1.1 Quick Installation Guide

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

Clamping Systems. RotoClamp/DiskClamp. RotoClamp Inside. RotoClamp Outside. DiskClamp. Gewährleistung. Inhalt. RotoClamp. DiskClamp. LinClamp.

Installation manual. Daikin Altherma low temperature monobloc option box EK2CB07CAV3. Installation manual. English

800W Programmable Single Output

SHEET 1 OF 14

Unit 5 Vocabulary. A function is a special relationship where each input has a single output.

NOTE 12 USB OPENING 'U' & 'UB' SERIES ONLY USB CAP NOT SHOWN NOTE 12 USB OPENING U & UB SERIES ONLY THIRD ANGLE PROJECTION DO NOT SCALE DRAWING

UT1553B BCRT True Dual-port Memory Interface

PIA INQUIRY QUESTIONS LEASED DARK FIBER AND SPECIAL CONSTRUCTION

P(r)dr = probability of generating a random number in the interval dr near r. For this probability idea to make sense we must have

Series EVS7-6/7-8/7-10

800W Programmable Single Output. 105% rated output power, Protection type: Constant current limit

Technical Information

CMPSC 470: Compiler Construction

FOR SIMPLE MEASUREMENT THE RULE OF THUMB IS SUFFICIENT. FOR THE REST THERE IS MARCAL.

VSxF-2/-3/-4 SMALL LINEAR VALVES PN16 FOR MODULATING AND ON/OFF-CONTROL SPECIFICATIONS

Assembly Instructions

Direct solenoid and solenoid pilot operated valves

Agilent Mass Hunter Software

Series LJ1. Uniaxial Electric Actuator

Graphing Conic Sections

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING

Simrad ES80. Software Release Note Introduction

2 PORT SLIP - IN CARTRIDGE VALVES (ISO 7368) Model : CV. Models. Hydraulic symbols B B. Relief cartridge with orifice and cushion nose

MEDIUM 3 AA - STANDARD SXX XXX

9400 SWITCH PLOW ASSEMBLY & PARTS BOOK

Description TNC. Features/Benefits. Applications. Developed in the late 1950 s, TNC is a threaded version

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD RECEPTACLE, CARD INSERTION, CONTACT SPACING (.156), TYPES A AND AD

McAfee Network Security Platform

Lab 1 - Counter. Create a project. Add files to the project. Compile design files. Run simulation. Debug results

Data sharing in OpenMP

E/ECE/324/Rev.2/Add.112/Rev.3/Amend.1 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.1

If you are at the university, either physically or via the VPN, you can download the chapters of this book as PDFs.

The Fundamental Theorem of Calculus

10.5 Graphing Quadratic Functions

cisc1110 fall 2010 lecture VI.2 call by value function parameters another call by value example:

STANDARD THIRD ANGLE PROJECTION DO NOT SCALE DRAWING

1.5 Extrema and the Mean Value Theorem

Fig.25: the Role of LEX

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

STANDARD CARTRIDGE VALVES 2/2-WAY

Tilt-Sensing with Kionix MEMS Accelerometers

Metal Element Current Sense Resistor

Zones 1&2; 21&22. Distribution Boxes and Empty Enclosures. Empty Enclosures. BXT Series Explosion-proof Enclosures (Ex d IIB) Catalogue number logic

1.1. Interval Notation and Set Notation Essential Question When is it convenient to use set-builder notation to represent a set of numbers?

Before We Begin. Introduction to Spatial Domain Filtering. Introduction to Digital Image Processing. Overview (1): Administrative Details (1):

Hyperbolas. Definition of Hyperbola

Stack. A list whose end points are pointed by top and bottom

Engineer To Engineer Note

COMPUTER EDUCATION TECHNIQUES, INC. (MS_W2K3_SERVER ) SA:

1.0. R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS

2 Computing all Intersections of a Set of Segments Line Segment Intersection

CSCE 531, Spring 2017, Midterm Exam Answer Key

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges

150/42 MIXER GRINDER REPLACEMENT PARTS MANUAL FOR 150/42 MIXER-GRINDER S/N 201 TO 975

6.3 Volumes. Just as area is always positive, so is volume and our attitudes towards finding it.

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING

MATH 2530: WORKSHEET 7. x 2 y dz dy dx =

HEDGE CLIPPER MODEL HC-1600 TYPE 1E

Presentation Martin Randers

APPLICATIONS OF INTEGRATION

Introductory Information. Setup Guide. Introduction. Overview of Setup. Space Required for Installation. Preparations. Attach the Ink Tanks

OUTPUT DELIVERY SYSTEM

Patterns and Algebra. My name. Series

McAfee Network Security Platform

Chapter 4 Fuzzy Graph and Relation

Ver 1.2. Radiation Hardened Bidirectional Multipurpose Transceiver. Datasheet. Part Number:B54ACS164245SARH

Ma/CS 6b Class 1: Graph Recap

ELUM TM Series Right Angle Illuminated Latching Pushbutton

PARALLEL AND DISTRIBUTED COMPUTING

ZZ - Advanced Math Review 2017

SPRING-LOADED CONNECTORS

6300 ON LAND PLOW ASSEMBLY & PARTS BOOK

Lecture 7: Integration Techniques

From Indexing Data Structures to de Bruijn Graphs

COMP 423 lecture 11 Jan. 28, 2008

Transcription:

DIRCIONL CONROLS Solenoid Controlled ilot Operted Directionl Vlves hese vlves re composed of solenoid operted pilot vlves nd pilot operted slve vlve. When solenoid is energised the pilot vlve directs the flow to move the spool of the slve vlve, thus chnging the direction of flow in the hydrulic circuit. IC---0 Vlve ype High ressure High Flow High pressure [1 Kgf/cm ] long with high flow mens compct system design. Lower pressure Drop System energy sving incresed s pressure drop of ech vlve hs gretly reduced. Specifictions Model Numers *1 Mx. Flow Mx. Operting ressure Kgf/cm Mx. ilot ressure Kgf/cm Min. * Required ilot res. Kgf/cm Grphic symol Mx. -Line ck ressure Kgf/cm Mx. Chngeover Frequency Cycles/min xt. Drin Int. Drin C DC R Mss Kg Solenoid Controlled ilot Operted Directionl Vlves Stndrd ype Shockless ype (S)-DSHG-0-C - -0 (S)-DSHG-0-N - -0 00 1 0 10 10 10. (S)-DSHG-0- - -0. (S)-DSHG-0-C - -1 (S)-DSHG-0-N - -1 0 10 10 10 1. 1 (S)-DSHG-0- - -1 1.1 (S)-DSHG-0-H - -1 1 1 1 1. (S)-DSHG--C - -1 10 10. 0 (S)-DSHG--N - -1. 1 (S)-DSHG-- - -1. 0 0 0 (S)-DSHG--H - -1.1 * 1. Mximum flow indictes ceiling flow. s the ceiling flow depends on the type of spool nd operting condition, refer to the list of Spool Functions on pges to for detils. *. ilot pressure of internl pilot drin models must lwys exceed tnk line ck pressure y minimum required pilot pressure.. 1. Solenoid Controlled ilot Operted Directionl Vlves 1

Model Numer Designtion DIRCIONL CONROLS F- S- DSH G -0 - -C* - -R* -D -N -1 -L Specil Sels F: For hosphte ster ype Fluids ype None: Stndrd ype S: Shockless ype Series Numer DSH: Solenoid Controlled ilot Operted Directionl Vlve. ype of Mounting G: Suplte Mount -ing Vlve Size 0 0 Numer of Vlve ositions Spool-Spring rrngement C: Spring Centred N: No- Spring : Spring Offset C: Spring Centred N: No- Spring : Spring Offset Spool ype,, 0,0,,1 (,,, *1,,11),, 0,, 0,, 1 (,) *1,, 0,0,,1 (,) *1,, 0,0,,1 (,, *1,,11),, 0 (,) *1,, 0, (,) *1 Specil wo osition Vlve --- * (Omit if not Required) * * (Omit if not Required) Models with ilot Choke Vlve C1: * With C1 With Choke C: * With C With Choke (Omit if not Required) ilot Connection None: Internl ilot Drin Connection None: xternl Drin Spool Control Modifiction R: With Stroke djustment, oth nds R: With Stroke djustment ort Coil ype ype of lectricl Conduit Con. C1C: * --- With D nd C1&C N1: 1 Choke : : Inter- * xternl nl Drin ilot * (Omit if not Required) * * (Omit if not Required) R: With Stroke djustment ort nd C, 10 000, 0 DC DC1, D C DC R1, R0 Note : 1. Options re mrked with*. In spool type,,, 0 nd, the comintion pplicle etween pilot system & drin system is s descried in the tle elow. ilot connection Drin Connection Cre in ppliction Hold ck pressure in the tnk line so tht the Internl ilot difference etween pilot pressure nd drin xternl Drin pressure is lwys more thn minimum required pilot pressure Internl Drin () Comintion not ville. xternl ilot () xternl Drin Internl Drin () No Limittion in use. None: erminl ox ype N: lug-in Connector ype lug-in Connector with indictior Light Design Numer 0 1 Mod. With lternte Offset Sol. --- L: (Omit if not Required) --- L: (Omit if not Required) *1 Shockless type (S-DSHG) re not ville for spool type mrked (). * Other spool types for specil -position vlves re ville in ddition to spool type,,, 0 nd. [Refer to the column vlves with centre position nd one offset position (Specil -position vlve) on pge * Coil type R is not ville for plug-in connector with Indictor type N1". Solenoid Rtings Solenoid rtings of pilot vlve re identicl with those of stndrd solenoid vlve. Refer to relevnt solenoid rtings descried on the pge elow. Model Numers (S-)DSHG-0 (S-)DSHG-0 (S-)DSHG- ilot Vlve Model Numers DSG-01- - -0 Solenoid Rting descried on he pge elow IC--1 ge No. Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS Su-pltes Vlve Model Numers DSHG-0 DSHG-0 DSHG- Su-plte Model Numers Mounting olts hred Size pprox. Mss Kg DHGM-0-00 1/ S.F. DHGM-0X-00 / S.F.1 DHGM-0-00 DHGM-0X-00 DHGM--00 DHGM-X-00 / S.F 1 S.F 1-1/ S.F 1-1/ S.F. 1. Su-pltes re ville. Specify su-plte model from the tle ove. When Su-pltes re not used, the mounting surfce should hve good mchined finish. Model Numers Nme Mounting olt Qty. DSHG-0 Soc. Hd. Cp. Screw M x 0 Lg. M x Lg. Mounting olt Ordering Code KDSHG-0-0 DSHG-0 Soc. Hd. Cp. Screw M1 x 0 Lg. KDSHG-0-1 DSHG- Soc. Hd. Cp. Screw M0 x Lg. KDSHG--1 Options Models with ilot Choke djustment (C1/C/C1C) C1 Models --- C Models --- C1 Choke y turning the djusting screw clockwise, min spool chngeover speed y the pilot pressure cn e lowered. ut centering speed of spring centered modes cn not e chnged. When the djusting screw is turned clockwise, min spool chngeover speed cn e lowered nd centering speed of spring centered models cn e lso lowered. Grphic symols (x. Spring Centered) C Choke Models with ilot Stroke djustment (R/R/R) When the djusting screw is screwed in, the min spool stroke ecomes short nd flow rte reduces. Grphic symols (x. Spring Centered) R Models dditionl Mss of Options dd mss of options descried elow to mss of stndrd type if options re used. Models with ilot Models With Choke dj. Stroke dj. Model Numers R C1,C C1C R R (S-)DSHG-0 0. 1. 1.0 0. (S-)DSHG-0 0. 1. 1. 0. (S-)DSHG- 0. 1.. 1. Solenoid Controlled ilot Operted Directionl Vlves R Models R Models Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS List of Spool Functions (DSHG-0/S-DSHG-0) "" hree ositions Spool ype Grphic Symol Model Numers DSHG-0-C S-DSHG-0-C Spring Centered Mximum Flow. 00 00 00 00 0 0 10 1 1 1 "" "" "0" "" DSHG-0-C DSHG-0-C S-DSHG-0-C DSHG-0-C0 S-DSHG-0-C0 DSHG-0-C 00 00 00 00 00 00 0 1 00 00 1 00 00 00 1 00 0 10 1 0 0 "" "0" "" DSHG-0-C DSHG-0-C0 S-DSHG-0-C0 DSHG-0-C 00 0 00 00 00 00 00 00 00 1 "" "" "11" "1" DSHG-0-C DSHG-0-C S-DSHG-0-C DSHG-0-C11 DSHG-0-C1 S-DSHG-0-C1 00 00 0 0 00 00 00 00 0 10 1 00 0 00 0 1 00 0 10 1 wo ositions Spool ype Grphic Symol No-Spring Mximum Flow. 0 1 Grphic Symol Spring Offset Mximum Flow. 0 1 "" (S-)DSHG-0-N 00 00 00 00 (S-)DSHG-0-00 00 00 00 "" DSHG-0-N 00 00 00 00 DSHG-0-00 00 00 00 "" (S-)DSHG-0-N 00 00 00 00 (S-)DSHG-0-00 00 00 00 "0" (S-)DSHG-0-N0 00 00 00 00 (S-)DSHG-0-0 00 00 00 00 "" DSHG-0-N 00 00 00 00 DSHG-0-00 00 00 00 Note: 1 Mx. Flow descried ove shows vlue t pilot pressure more thn Kgf/cm. Mx. Flow shows vlue t the condition of the flow s shown in right figure (or ). Mx. Flow differs ccording to hydrulic circuit, if port or is locked. Consult uken for such ppliction. For vlues in the doule row, upper is mximum flow t pilot pressure Kgf/cm. (In cse pressure centered model, pilot pressure is Kgf/cm ), lower is pilot pressure of Kgf/cm. Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS List of Spool Functions (DSHG-0/S-DSHG-0) "" hree ositions Spool ype Grphic Symol (S-)DSHG-0-C Spring Centered Mximum Flow 0 1 Grphic Symol (S-)DSHG-0-H ressure Centered Mximum Flow 0 1 0 "" DSHG-0-C 0 0 DSHG-0-H "" "0" "" "" "0" "" "" "" "11" "1" wo ositions Spool ype (S-)DSHG-0-C (S-)DSHG-0-C0 DSHG-0-C DSHG-0-C (S-)DSHG-0-C0 DSHG-0-C DSHG-0-C (S-)DSHG-0-C DSHG-0-C11 (S-)DSHG-0-C1 Grphic Symol No-Spring 0 0 00 0 0 0 0 0 0 0 Mximum Flow 0 0 1 (S-)DSHG-0-H (S-)DSHG-0-H0 DSHG-0-H DSHG-0-H (S-)DSHG-0-H0 DSHG-0-H DSHG-0-H (S-)DSHG-0-H DSHG-0-H11 (S-)DSHG-0-H1 Grphic Symol Spring Offset Mximum Flow 0 0 0 0 0 0 0 0 0 1 Solenoid Controlled ilot Operted Directionl Vlves "" (S-)DSHG-0-N (S-)DSHG-0- "" DSHG-0-N DSHG-0- "" (S-)DSHG-0-N (S-)DSHG-0- "0" (S-)DSHG-0-N0 (S-)DSHG-0-0 "" DSHG-0-N DSHG-0- Note: 1 Reltion etween mx. flow nd pilot pressure is: Vlue in the single column is constnt regrdless of pilot pressure suject to pilot pressure more thn Kgf/cm. In cse pressure centered models, pilot pressure is more thn Kgf/cm. For vlues in the doule row, upper is mx. flow t pilot pressure Kgf/cm. (In cse pressure centered models, pilot pressure is Kgf/cm or more.) Lower is pilot pressure of 1 Kgf/cm. Mx. Flow shows vlue t the condition of the flow s shown in right figure (or ). Mx. Flow differs ccording to hydrulic circuit, if port or is locked, consult uken for such ppliction. Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS List of Spool Functions (DSHG-/S-DSHG-) "" "" "" "0" "" "" "0" "" hree ositions Spool ype Grphic Symol (S-)DSHG--C DSHG--C (S-)DSHG--C (S-)DSHG--C0 DSHG--C DSHG-0-C (S-)DSHG--C0 DSHG--C Spring Centered Mximum Flow 0 1 0 0 0 0 0 0 0 0 0 00 0 0 0 0 Grphic Symol (S-)DSHG--H DSHG--H (S-)DSHG--H (S-)DSHG--H0 DSHG--H DSHG--H (S-)DSHG--H0 DSHG--H ressure Centered V Mximum Flow 0 1 0 0 0 0 0 0 "" DSHG--C 0 DSHG--H "" "11" "1" (S-)DSHG--C DSHG--C11 (S-)DSHG--C1 0 0 0 0 0 0 (S-)DSHG--H DSHG--H11 (S-)DSHG--H1 wo ositions No-Spring Spring Offset Spool ype Grphic Symol Mximum Flow 0 1 Grphic Symol Mximum Flow 0 1 "" (S-)DSHG--N (S-)DSHG-- "" DSHG--N DSHG-- "" (S-)DSHG--N (S-)DSHG-- "0" (S-)DSHG--N0 (S-)DSHG--0 "" DSHG--N DSHG-- Note : 1 Reltion etween mx. flow nd pilot pressure is Vlue in the single column is constnt regrdless of pilot pressure suject to pilot pressure more thn Kgf/cm. For vlues in the doule row, upper is mx. flow t pilot pressure Kgf/cm. Lower is pilot pressure of 1 Kgf/cm. Mx. Flow shows vlue t the condition of the flow s shown in right figure (or ). Mx. Flow differs ccording to hydrulic circuit, if port or is locked, consult uken for such ppliction. Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS Spring Offset Vlves with lternte Solenoid hough our stndrd spring offset models use solenoid "", lternte models using solenoid "" re lso ville. he grphic symols re expressed s elow. For Models - nd, refer to tle s elow. Stndrd Offset lternte Offset ( L ) Vlve with Centre osition nd One Offset osition (Specil wo osition Vlve) In ddition to the stndrd two position vlves s shown in the tle on pges to two kinds of vlves re ville with center position nd either one of two offset positions. Stndrd nd lternte offset types use solenoid nd solenoid respectively. (xmple) In cse of spool ype Sol. energised Center osition Sol. energised Model Numers 0 -DSHG-0- (S-)-DSHG- - Grphic Symols Stndrd Offset ype lternte Offset ype "" : () Model Numers 0 -DSHG-0- (S-)-DSHG- - Grphic Symols Stndrd Offset ype "" : () lternte Offset ype Model Numers 0 -DSHG-0-N (S-)-DSHG- -N Grphic Symols Stndrd Offset ype Solenoid Controlled ilot Operted Directionl Vlves DSHG- - DSHG- - DSHG- -N (S-)DSHG- - (S-)DSHG- - (S-)DSHG- -N (S-)DSHG- -0 (S-)DSHG- -0 (S-)DSHG- -N0 DSHG- - DSHG- - DSHG- -N DSHG- - DSHG- - DSHG- -N (S-)DSHG- -0 (S-)DSHG- -0 (S-)DSHG- -N0 DSHG- - DSHG- - DSHG- -N DSHG- - DSHG- - DSHG- -N (S-)DSHG- - (S-)DSHG- - (S-)DSHG- -N DSHG- -11 DSHG- -11 DSHG- -N11 (S-)DSHG- -1 (S-)DSHG- -1 (S-)DSHG- -N1 Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS ressure Drop ressure drop curves sed on viscosity of cst nd specify grvity of 0.0. DSHG-0, S-DSHG-0 1 ressure Drop 1 0 0 00 00 Flow Rte Spool ype 0 ressure Drop Curve Numers ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Spool ype 0 ressure Drop Curve Numers ( ) ( ) ( ) ( ) 11 ( ) ( ) ( ) ( ) 1 ( ) 1 ( ) ( ) ( ) ( ) Note : Figures enclosed ( ) shows curve numer for shockless type (S-DSHG-0). 0 DSHG-0, S-DSHG-0 1 ressure Drop ressure Drop 1 1 0 0 00 00 00 Flow Rte DSHG-, S-DSHG- 0 1 1 0 0 00 00 00 00 0 Flow Rte 1 Spool ressure Drop Curve Numers Spool ressure Drop Curve Numers ype ype 0 ( ) ( 1 ) ( ) ( ) ( ) ( ) ( ) ( ) 1 0 11 ( ) ( ) ( ) ( ) ( 1 ) 1 Spool ressure Drop Curve Numers Spool ressure Drop Curve Numers ype ype ( ) ( ) ( ) ( ) 0 ( ) ( ) ( ) ( ) ( ) 0 ( ) ( ) ( ) ( ) 1 11 1 For ny other viscosity, multiply y the fctors in the tle right. For ny other specific grvity (G'), the pressure drop ( ') my e otined from the formul elow. Viscosity cst 1 0 0 0 0 0 0 0 0 Fctor 0.1 0. 0. 1.0 1.0 1.1 1.1 1. 1. 1.0 ' = (G'/0.0) Solenoid Controlled ilot Operted Directionl Vlves

ypicl Chngeover ime Chngeover time vries ccording to oil viscosity, spool type nd hydrulic circuit. DIRCIONL CONROLS Chngeover ime [est Conditions] ms 0 ms DSHG-0 0 0 00 0 ilot ressure DSHG- SOL "ON" : C SOL "OFF" : C N Coil ype : D(Models with DC Solenoids) Voltge : Rted Voltge Oil viscosity : cst SOL "ON" : SOL "OFF" : Chngeover ime ms 0 DSHG-0 SOL "ON" : C SOL "OFF" : C 0 0 00 0 ilot ressure SOL "ON" : SOL "OFF" : 0 Chngeover ime 00 0 SOL "OFF" : C SOL "ON" : C N 0 0 00 0 ilot ressure SOL "ON" & SOL "OFF" : N lug-in Connector ype: (S-) DSHG-0 - - -0 11 Di. x hru. 1. Di. Spotfce lces 0 ressure ort "" 1. 0. N1 Mounting Surfce: ISO 01-D-0-- DIMNSIONS IN MILLIMRS ilot ressure ort "X" (For xternl ilot Models only) Solenoid Controlled ilot Operted Directionl Vlves nk ort "" Cylinder ort "" UKN 0 Di. x hru. 11 Di. Spotfce lces.... 1 1. Cylinder ort "" ilot Drin ort "" (For xternl Drin Models Only) * osition of cle deprture cn e chnged. For detils, refer to DSG-01 vlves on IC--1-0 ge. Cle Deprture* Cle pplicle: Outside Di. ------ -mm Conductor re --- Not xceeding 1.mm² 11 Mx. 1 Mx. Mnul ctutor Nut Hex. Mounting Surfce (O-Ring Furnished). Solenoid Controlled ilot Operted Directionl Vlves Di. Locting ins lces

DIRCIONL CONROLS erminl ox ype : (S-)DSHG-0- - -0 0 0 Spce Needed to Remove Solenoid-ch nd Mnul ctutor Di. 1 11. Nut Hex. lug-in Connector ype : (S-)DSHG-0- - - N -1 N1 0. nk ort "" 1. Di. x hru. 0 Di. Spotfce lces. 10. 1 ilot ressure ort "X" (For xternl ilot Models Only) C.1 ressure ort "" ilot Drin ort "" (For xternl Drin Models Only).1 Cylinder ort "" Cylinder ort "". 1 11 Mx. Cle Deprture Cle pplicle : Outside Di. --- - mm Conductor re --- Not xceeding 1. mm² F Model Numers DIMNSIONS IN MILLIMRS Dimensions mm C D F (S-)DSHG-0- - -N/N1 0. (S-)DSHG-0- -D -N/N1 1. (S-)DSHG-0- -R -N. 1 1 1 D 11 Mounting Surfce (O-Ring Furnished). Locting ins lces Mnul ctutor Di. Nut Hex. 1. Mounting Surfce Di. wo Locting ins (O-Ring Furnished) osition of cle deprture cn e chnged. For detils, refer to DSG-01 vlve on IC--1 ge. Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS erminl ox ype : (S-)DSHG-0- - -1 0 0 Spce Needed to Remove Solenoid-ch nd Mnul ctutor lectricl conduit connection "C" hd. (oth nds) Sol Sol 1 1 0. Di. x hru. Nut lug-in Connector ype : (S-)DSHG-- - - N -1 N1 1. Di. x hru. Di. Spotfce lces nk ort "". 10.. 1. 11.. Cylinder ort "" ilot ressure ort "X" (For xternl ilot Model). C ressure ort "". ilot Drin ort "" (For xternl Drin Models Only) 1. 1. Cylinder ort "" 1 Mx. Model Numers Cle Deprture Cle pplicle : Outside Di. --- - mm Conductor re --- Not xceeding 1. mm² F DIMNSIONS IN MILLIMRS Dimensions mm C D F (S-)DSHG-- - -N/N1. (S-)DSHG-- -D -N/N1. (S-)DSHG-- -R -N. 00 D 1 1. Mounting surfce (O-Ring furnished) Di. Locting ins lces Solenoid Controlled ilot Operted Directionl Vlves Mounting Surfce (O-Ring Furnished) Di. Locting ins osition of cle deprture cn e chnged. For detils, refer to DSG-01 vlve on IC--1 ge. Solenoid Controlled ilot Operted Directionl Vlves 11

DIRCIONL CONROLS erminl ox ype : (S-)DSHG-- - -1 M hd. wo ye olts 0 0 Spce Needed to Remove Solenoid-ch nd Mnul ctutor Di. x hru. lectricl conduit connection "C" hd. (oth nds) Nut. Mounting surfce (O-Ring furnished) OIONS 0 (S-)DSHG- 0- -C1/C/C- N N1 Models with ilot Choke vlve DIMNSIONS IN MILLIMRS SOL SOL LOCK LOCK H F J 00. Di. Locting ins lces Dimension mm Model Numers J F H C SOL DC SOL R SOL (S-)DSHG-0- -C1 1 -- 0 0 0 (S-)DSHG-0- -C 1 -- 0 0 0 (S-)DSHG-0- -C1C 1 0 0 0 (S-)DSHG-0- -C1 1 -- 1 (S-)DSHG-0- -C 1 1 -- (S-)DSHG-0- -C1C 1 1 1 (S-)DSHG-- -C1 0 -- 1 0 01 0 (S-)DSHG-- -C 0 1 -- 1 1 1 (S-)DSHG-- -C1C 0 1 1 Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS OIONS 0 (S-)DSHG-0 - -R Models with Stroke djustment Fully xtended C SOL SOL Stroke dj. Screw (ort "" nd ) 1 Hex. Lock Nut 1 Hex. 10 0 Su lte DHGM- -00 0X 1 1. 1. 1. 1.. 1. Fully xtended D Model Numers C D (S-)DSHG-0- -R (S-)DSHG-0- -R 111 0 (S-)DSHG-- -R 1.. 10 1 1.. 1..1 1.1 0 Stroke djustment Screw (ort "" nd ) 1 Hex. M hd. x 1 Deep lces 1 S.F hd. 0 lces DIMNSIONS IN MILLIMRS Su-plte Model Numers DHGM-0-00 DHGM-0X-00 1 0 C hd. 1/ S.F / S.F 1. "C" hd. lces Solenoid Controlled ilot Operted Directionl Vlves 11 Di. x hru. 1. Di. Spotfce lces. Di. x Deep lces 1...1 10 Di. lces 1. Di. lces M hd. x 1 Deep lces 1. Vlve ypes ilot ressure ort X ort Remrks Solenoid Controlled ilot Operted Directionl Vlves ilot Operted Directionl Vlves Spring Centered No-Spring Spring offset Used only on externl pilot type vlves. o e plugged on internl pilot type Vlves. Used Used s drin port only on externl drin type vlves. o e plugged on internl pilot type Vlves. Used s pilot port Used s pilot drin port Mnully Operted Direction Vlves Not used (plug is not required) Used s drin port Norml size: Only 0 Solenoid Controlled ilot Operted Directionl Vlves 1

DIRCIONL CONROLS 0 DHGM- -00 0X 1 0 10. 1/ S.F hd. M1 hd. x Deep lces lces 0 D F H J 1 1 1..1 V X 1. 1 W 11. 11 11 Di. lces. Di. lces 1..1 "C" hd. lces W K V X N L 1.1.1. Su-plte Model Numers C hd. Dimensions mm D F H J K L N DHGM-0-00 ¾ S.F 11. 1.. 0. 1... DHGM-0X-00 1 S.F 1. 1 0 10 For uses of ort X,, V, W, refer to DHGM-- DIMNSIONS IN MILLIMRS DHGM- -00 X 0 0.. 10. 1. 1. 11.. 1. Di. x Deep lces M0 hd. x Deep lces 0 1 F H "C" hd. lces 1 1. 1... V X W 11. W X V / S.F hd. lces 0.1 1. 11 Di. lces. Di. lces 1. Di. x hru. Di. Spotfce lces J K 1 Su-plte Model Numers C hd. Dimensions mm F H J K DHGM--00 1-1/ S.F 1 1. 10. DHGM-X-00 1-1/ S.F 1 1. 11. 1 Solenoid Controlled ilot Operted Directionl Vlves

DIRCIONL CONROLS Note : Uses of port X,, V nd W Solenoid Controlled ilot Operted Directionl Vlves ilot Operted Directionl Vlves Vlve ypes ilot res. ort X ort ort V ort W Spring centered, No-spring, Spring offset Spring centered, No-spring, Spring offset Mnully Operted Directionl Vlves Used only on externl pilot type vlves. o e plugged on internl pilot type vlves. Used Used s drin port only on externl drin type vlves. o e plugged on * internl pilot type vlves. Used s pilot pres. ort Used pilot port drin port Not used Not used (plug is not required) (plug is not required) * s the thred is provided on the ody, plug either port on the su-plte or port on the ody. List of ilot Vlves Not used (plug is not required) Not used (plug is not required) Used Not used (plug is not required) Spre rts List Sl. No. Vlve Model Numers (S-)DSHG-0/0/-C - - (S-)DSHG-0/0/- - - (S-)DSHG-0/0/-N - - List of Sels ilot Vlve Model Numers DSG-01-C- - -0 DSG-01-- - -0-L DSG-01-D- - -0 rt Numers Nme of rt DSHG-0 DSHG-0 DSHG- Qty 1 O-Ring SO-N- -- -- O-Ring -- SO-N- -- O-Ring -- SO-N-1 O-Ring -- -- SO-N-0 O-Ring -- SO-N-0 -- O-Ring SO-N- -- -- O-Ring -- SO-N-0 -- O-Ring -- -- SO-N- O-Ring -- -- SO-N-G O-Ring SO-N- -- -- Notes: 1 Fill coil type ( symol representing current/ voltge) in section mrked. Likewise, in selection mrked, fill symol representing the type of conduit connection (N: lug-in connector type). For the detils of the pilot vlves, see pge IC--1 ge:. Solenoid Controlled ilot Operted Directionl Vlves Note: When ordering the sels, plese specify the Sel Kit numer from the tle elow. List of Sel kits Vlve Model Numers DSHG-0 DSHG-0 DSHG- Sel Kit Numers KS-DSHG-0-0 KS-DSHG-0-1 KS-DSHG--1 Note: When ordering the sels, plese specify the Sel Kit numer KS-DSHG-0-0/KS-DSHG-0-1/ KS-DSHG--1. Solenoid Controlled ilot Operted Directionl Vlves 1