Installation Instructions PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer Catalog Number 6189V-2PCI15R Topic Page About This Publication 1 Important User Information 2 Safety Precautions 3 About the PCI Expansion Slot Kit 3 Install the PCI Expansion Slot Kit 4 Additional Resources 9 About This Publication This document shows how to install the PCI Expansion Slot Kit in a 6181P 15 Series D industrial computer.
2 PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations. WARNING Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss. IMPORTANT ATTENTION Identifies information that is critical for successful application and understanding of the product. Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you to identify a hazard, avoid a hazard, and recognize the consequences. SHOCK HAZARD Labels may be located on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present. BURN HAZARD Labels may be located on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures.
PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 3 Safety Precautions Observe the following precautions when installing the PCI expansion kit. ATTENTION Disconnect all power from computer before removing and installing components. Failure to disconnect power could result in severe electrical shock or damage to the computer. ATTENTION Wear a wrist strap (well grounded) and perform work in a static safe environment. Electrostatic Discharge (ESD) can damage the computer and components. About the PCI Expansion Slot Kit The PCI expansion slot kit (catalog number 6189V-2PCI15R) provides two PCI card slots for 6181P 15 Series D or later industrial computers. Parts List The PCI Expansion Kit (6189V-2PCI15R) consists of these items: Riser bracket (A) Riser bracket (B) Center support PCI riser board Slot cover bracket Replacement air duct 20 M3x6 panhead screws 3 M3x6 flathead screws
4 PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer Install the PCI Expansion Slot Kit Follow these steps to install the PCI expansion slot kit. 1. Disconnect power from the computer. 2. Remove the back cover. Set the nine screws aside for replacing back cover. 3. Remove the one-slot cover bracket by removing the two screws. Screws Slot Cover Bracket
PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 5 4. Remove the one-slot riser board. Set the two screws aside for replacing the riser board. PCI Riser Board 5. Add riser bracket (A) to the chassis by using six M3x6 panhead screws. Riser Bracket (A)
6 PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 6. Add the center support to the chassis using three M3x6 flathead screws. Center Support Riser Bracket (A) 7. Add riser bracket (B) to riser bracket (A) using eight, M3x6 panhead screws Riser Bracket (B) Riser Bracket (A)
PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 7 8. Add the riser board using the two M3x6 panhead screws from step 4 and two M3x6 panhead screws from the kit. PCI Riser Board Center Support Riser Bracket (B) Riser Bracket (A) 9. Attach the two-slot cover bracket to the chassis without PCI cards, using two M3x6 panhead screws from step 3 and two M3x6 panhead screws from the kit. Slot Cover Bracket
8 PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 10. Insert the the first PCI card to the riser board and connect the card to the slot cover using a single M3x6 panhead screw. PCI Riser Board Slot Cover Bracket 11. Repeat step 10 to connect the second card. 12. Replace the existing air duct. a. Remove the existing air duct from the back cover of the chassis by removing the three screws b. Attach the replacement air duct to the back cover of the chassis using the same three screws. c. Set the opening of the duct to its full-open position, if possible. If the installed PCI cards interfere with the fully-opened duct, reduce the opened position to eliminate the interference.
PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 9 13. Reinstall the back cover over the chassis and replace the nine screws from step 2. Additional Resources For additional information on the industrial computers, refer to the Integrated Display Computers User Manual, publication 6181P-UM001. You can view or download publications at http://literature.rockwellautomation.com. To order paper copies of technical documentation, contact your local Rockwell Automation distributor or sales representative.
10 PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer Notes:
PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer 11 Notes:
Rockwell Automation Support Rockwell Automation provides technical information on the Web to assist you in using its products. At http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools. For an additional level of technical phone support for installation, configuration, and troubleshooting, we offer TechConnect Support programs. For more information, contact your local distributor or Rockwell Automation representative, or visit http://support.rockwellautomation.com. Installation Assistance If you experience a problem with a hardware module within the first 24 hours of installation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your module up and running. United States 1.440.646.3223 Monday Friday, 8am 5pm EST Outside United States Please contact your local Rockwell Automation representative for any technical support issues. New Product Satisfaction Return Rockwell tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning, it may need to be returned. United States Outside United States Contact your distributor. You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process. Please contact your local Rockwell Automation representative for return procedure. Allen-Bradley, TechConnect, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. PN 41061-392-01(1) Copyright 2007 Rockwell Automation, Inc. All rights reserved.