Overview Of Systems For VMEbus Ripac VME/VME64x Slim-Box Ripac VME/VME64x Systems Ripac VME/VME64x Systems 1, 2, 3, 4U/2, 4, 6, 8 slot in AC input Order No. see pages 110-112 For backplanes see page 60 Applications Configuration of 482.6 mm (19") industrial computer systems to the VME specifications for Telecommunications Automation Design Features 482.6 mm (19") rack-mounted system for horizontal installation of computer boards at the front, and I/O boards at the rear 1U, 2U, 3U, 4U, 300 mm deep Standard cooling from left to right or right to left Sheet steel, spray-finished (black) Including backplane and fan Configuration for VME boards to VME = VITA-1, VME64x = VITA-1.1 3U, 5 slot/4u, 7 slot horizontal Order No. see page 114 For backplanes see page 60 Applications Configuration of 482.6 mm (19") computer systems to VME specifications for Process control Traffic management technology Image processing Automation Design Features 482.6 mm (19") rack-mounted system for horizontal installation of double Euroboards 3U or 4U, 405 mm deep Clear chromated aluminum Including backplane and power supply unit Horizontal installation space for double Euroboards: 5 or 7 slots Installation of VME or VEM64x cards to VME specification 4U and 7U, 12 slot Order No. see page 116 For backplanes see page 60 Applications Configuration of 482.6 mm (19") industrial computer systems to VME specifications for Process control Traffic management technology Image processing Automation Design Features 482.6 mm (19") rack-mounted system for vertical installation of Euroboards/double Euroboards 4 or 7U, 405 mm deep Clear chromated aluminum Including backplane and power supply unit Horizontal installation chamber for double Euroboards: 12 slots Installation of VME or VME64x cards to VME specification User Benefits Horizontal installation of double Euroboards Maximum installation with minimal space requirements 2/4/6/8 slots at the front for 160 mm and at the rear for 80 mm boards Hot swap-compatible power supply units EMC and ESD protection Integral cooling from left to right Complies with VITA-1, VITA-1.1, IEC 60 297-3 and IEEE 1101.1/1101.10/1101.11 User Benefits Horizontal installation of double Euroboards EMC version Targeted air routing from front to rear ESD protection Keyable guide rails Complies with IEC 60 297-3 and IEEE 1101.1/1101.10 User Benefits Vertical installation of double Euroboards EMC version Targeted air routing from bottom to top ESD protection Keyable guide rails Complies with IEC 60 297-3 and IEEE 1101.1/1101.10 108
Overview Of Systems For VMEbus Ripac VME/VME64x Systems Ripac VME/VME64x Systems 7U, 12 Slots Order No. see page 118. Applications Configuration of 482.6 mm (19") computer systems to VME specifications for Process control Traffic management technology Image processing Automation Design Features 482.6 mm (19") rack-mounted system for vertical installation of double Euroboards 7U, 405 mm deep Clear chromated aluminum Includes backplane and power supply unit Installation chamber for Euroboards/double Euroboards: 12 slots Installation of VME or VME64x boards to VME specification 9 U, 12 Slots With RiCool Order No. see page 120. Applications Configuration of 482.6 mm (19") computer systems to VME specifications for Process control Traffic management technology Image processing Automation Design Features 482.6 mm (19") rack-mounted system for vertical installation of double Euroboards 9U, 290.5 mm deep, at the rear for I/O modules Clear chromated aluminum Includes backplane and power supply unit Installation chamber for Euroboards/double Euroboards: 12 slots Installation of VME or VME64x boards to VME specification Including 2 radial fans; max. output: 204 m 3 /h, hot swap, speed control User Benefits Vertical installation of double Euroboards EMC version Targeted air routing from front to rear ESD protection Keyable guide rails Complies with IEC 60 297-3 and IEEE 1101.1/1101.10 User Benefits Vertical installation of double Euroboards EMC version Targeted air routing from bottom to top ESD protection I/O transition modules at the rear Keyable guide rails Effective ventilation with 2 radial fans RiCool Complies with IEC 60 297-3 and IEEE 1101.1/1101.10/1101.11 109
Order Information Rack-Mounted System For VMEbus 4U And 7U, 12 Slot (VME/VME64x) Order No. Order No. Order No. Page MPS system MPS system MPS system U 4U (3U+1U) 7U (6U+1U) 7U (6U+1U) Side panel Wiring chamber (t) mm For PCB For VME For VME For VME64x depth (mm) 405 210 3U/6U x 160 mm 3687702 3687703 3687704 Mechanical Supply Includes Item Description Material Quantity 1 Basic subrack system (side panels, Aluminum, / 1 1 1 horizontal rails, flanges, EMC gaskets) stainless steel 2 Covers, vented 1 mm aluminum, 2 2 2 3 Finger guard Polyamide 3 3 3 4 EMC front panel, 6U/4HP (with 7U) Aluminum, 1 5 Support, vertical (with 7U) Aluminum, 1 6 Fan mounting plate 1 mm aluminum, anodized 1 1 1 7 Plastic guide rails PC UL 94-V1 24 24 7a Plastic guide rails, keyable PC UL 94-V0 24 8 EMC front panel 1U/84HP, for switch/led 2.5 mm aluminum, 1 1 1 Rear panel 4U/84HP, horizontally hinged 2.5 mm aluminum, 1 with connector cutout 9 EMC rear panel 7U/84HP, horizontally 2.5 mm aluminum, 1 1 hinged with connector cutout Electrical/electronic Supply Includes Technical specifications 10 DC fan 140 m 3 /h per fan (VDE, UL, 3 3 3 226 CSA) optional speed control 11 Combined unit with integral filter 6 A (VDE, UL, CSA) 1 1 1 123 and IEC socket 12 Open frame power supply unit 400W, 5 V/80 A, +12 V/8 A, 1 140-12V/8 A, (VDE, UL, CSA) 12a Open frame power supply unit 400W, 3, 3 V/25 A, +5 V/25 A, 1 140 +12 V/8 A, -12 V/7 A (VDE, UL, CSA) 13 VME backplane J1, 12 slots, IN-board passive, 1 1 131 ADC VME64x backplane J1/J2, 12 slots 1 131 LED display module with mains switch For (3.3 V) +5 V, ±12 V, 1 1 1 122 fan failure 14 AC cable harness X X X 16 Filter module for DC fan Interference voltage filter 3 3 3 122 DC available upon request X X X Ripac rack-mounted system for VMEbus (VME) 4U (3 + 1), 12 slots. Ripac rack-mounted system for VMEbus (VME, VME 64x) 7U (6 + 1), 12 slots. 116
Order Information Rack-Mounted System For VMEbus 4U And 7U, 12 Slot (VME/VME64x) Technical Description: Vented subrack, 405 mm deep, for installation in 482.6 mm (19") enclosures or cases. Prepared to accommodate VMEbus boards and drives. Complies with IEC 60 297-3 and IEEE 1101.1/ 1101.10. Accessories: Backplanes, see page 60 Front panels, see page 96 Power supply units, see page 138 Air block panel for plastic guide rails, see page 182 PCB covers, see page 188 Deviations For VME64x: Front horizontal rail with 10 mm extension (type B) Plastic guide rail, keyable 6U backplane Illustration: 7U MPS system for VME Electronic Service: Modifications or custom solutions are available. The Kaparel/Rittal system specialists will assist you with planning and configuration. Option of installing 12 Euroboards (3U x 160 mm) For the installation of drives: 36HP Option of installing 12 double-euroboards (6U x 160 mm) For the installation of drives: 32HP, 36HP (for VME 64x) 4U 7U Integral 400W power supply with wide-range input Including VME64x J1/J2 backplane, 12 slots Front horizontal rails with 10 mm extension for injector/ extractor handle (with VME64x) Keyable plastic guide rails (for VME64x) Cooling from bottom to top Forced ventilation with 3 DC fans EMC protection, due to conductive surface finish on all components and EMC gaskets Fully assembled, pre-wired and tested Sample application (RiCase instrument case with system configuration) illustrating the diversity of Ripac system solutions. Ripac box type plug-in units to accommodate PCBs. Order No. see page 213. 117
Order Information Rack-Mounted System For VMEbus 7U, 12 Slot (VME, VME64x) Order No. Order No. Page MPS system MPS system U 7 (6 + 2 x.5) 7 (6 + 2 x.5) Side panel Wiring chamber (t) mm For PCB For VME For VME64x depth (mm) 405 210 6U/160 mm 3687705 3687706 Mechanical Supply Includes Item Description Material Quantity 1 Basic subrack system (side panels, Aluminum, / 1 1 horizontal rails, flanges, EMC gaskets) stainless steel 2 Cover plate with 1/2U edge fold and cutouts 1 mm aluminum, 1 1 for switches/leds 3 L-shape cover with 1/2U edge fold, 1 mm aluminum, 1 1 vented at front 4 EMC front panel, 6U /4HP 2.5 mm aluminum, 1 EMC cover plate for fans Aluminum, 3 3 5 Vertical support Aluminum, 1 6 Air baffle plate 1 mm aluminum, 1 1 anodized 7 Air block panel, 1/2U Epoxy 1 1 8 Plastic guide rails PC UL 94-V1 24 8a Keyable plastic guide rails for VME64x PC UL 94-V0 24 9 EMC rear panel, horizontally hinged, 7U, 2.5 mm aluminum, 1 1 with fan and connector cutout Electrical/Electronic Supply Includes Technical specifications 10 DC fan 140 m 3 /h per fan (UL, CSA, 3 3 226 VDE) optional speed control 11 Combined unit with integral filter and 6 A (VDE, UL, CSA) 1 1 123 IEC socket 12 Open frame power supply unit 400W, 5 V/80 A, 1 140 +12 V/8 A, -12 V/8 A (VDE, UL, CSA) Open frame power supply unit 400W, 3.3 V/25 A, 1 140 +5 V/25 A, +12 V/ 8 A, -12 V/7 A (VDE, UL, CSA) 13 VME backplane J1, 12 slots, IN-board 1 131 passive, ADC VME64x backplane J1/J2, 12 slots (without P0) 1 131 14 LED display module with mains switch For (3.3 V) +5 V, ±12 V, 1 1 122 fan failure 15 Filter module for DC fan Interference voltage filter 3 3 122 16 AC cable harness X X DC available upon request X X Ripac Rack-Mounted System For VMEbus (VME, VME64 x) 7U (6 + 2 x.5), 12 slots. 118
Order Information Rack-Mounted System For VMEbus 7U, 12 Slot (VME, VME64x) Technical Description: Vented subrack, 405 mm deep, for installation in 482.6 mm (19") enclosures or cases Prepared to accommodate VMEbus boards and drives Complies with IEC 60 297-3 and IEEE 1101.1/ 1101.10 Accessories: Backplanes, see page 60 Front panels, see page 96 Power supply units, see page 138 Air block panel for plastic guide rails, see page 182 PCB covers, see page 188 Deviations For VME64x: Front horizontal rail with 10 mm extension (type B) Plastic guide rail, keyable 6U backplane Illustration: 7U MPS system for VME Electronic Service: Modifications or custom solutions are available. The Kaparel/Rittal system specialists will assist you with planning and configuration. 7U Option of installing 12 double-euroboards (6U x 160 mm) For the installation of drives: 32HP/36HP (for VME64x) Integral 400W power supply with wide-range input Including VME or VME64x backplane, 12 slots Front horizontal rails with 10 mm extension (for VME64x) Keyable plastic guide rails (for VME64x) Cooling from front to rear Forced ventilation with 3 DC fans EMC protection, due to all-round EMC gaskets Fully assembled, pre-wired and tested Plastic Anti-static Cover: For mechanical protection of the PCB solder side and EMC gaskets. Order No. see page 201. Air Block Panel: For guide rails, to prevent air flow on unused slots. Order No. see page 185. 119
Order Information Rack-Mounted System For VMEbus 9U, 12 Slot (VME64x) With RiCool Radial Fan Order No. Page MPS system U 9 Side panel Wiring chamber (t) mm For PCB For VME64x depth (mm) 290.5 85.5 6U x 160 mm 3687708 Mechanical Supply Includes Item Description Material Quantity 1 Basic subrack system (side panels, Aluminum, /stainless steel 1 horizontal rails, flanges, EMC gaskets) 2 EMC covers, vented 1 mm aluminum 2 3 Center horizontal rail 12HP 1 mm aluminum, 1 4 Z rail 12HP Aluminum, 4 5 EMC contact strip Aluminum, 2 6 Plastic guide rails, keyable Polycarbonate UL 94-V0 24 Plastic guide rails for power supply unit Polycarbonate UL 94-V0 2 6a Plastic guide rails for I/O transition modules Polycarbonate UL 94-V0 24 7 EMC front panel 6U/36HP 2.5 mm aluminum, 1 8 Front panel 1.5U/84HP, horizontally hinged 2.5 mm aluminum, 1 9 Front panel 1.5U/84HP, vented, horizontally hinged 2.5 mm aluminum, 1 for switches/leds 10 EMC rear panel, 1.5U/84HP, vented 2.5 mm aluminum, 1 11 EMC rear panel, 1.5U/84HP, with connector cutout 2.5 mm aluminum, 1 12 Filter mat 160 mm, 84HP, slide-in 1 13 Mounting plate for RiCool 1 mm aluminum, anodized 1 Electrical/Electronic Supply Includes Technical specifications 14 RiCool DC fan (may be pulled out forwards individually) 204 m 3 /h, 48 W 2 222 15 Combined unit with integral filter and IEC connector 6 A (VDE, UL, CSA) 1 123 16 Power supply unit, plug-in type, 6U/12HP 356 W, 5 V/35 A, +12 V/6 A, -12 V/2 A, (VDE, IEC) 1 141-143 VME64x backplane J1/J2, 12 slots 1 131 LED display module with mains switch For +5 V, ±12 V, fan failure 1 122 17 Power supply unit backplane 47 pin positronic 2 88-90 18 AC cable harness X DC available upon request X Ripac rack-mounted system for VMEbus (VME64x) 9U (6 + 2 x 1.5), 12 slots, with RiCool radial fan. Installation facility at rear for I/O transition modules. 120
Order Information Rack-Mounted System For VMEbus 9U, 12 Slot (VME64x) With RiCool Radial Fan Technical Description: Vented subrack, 290.5 mm deep, for installation in 482.6 mm (19") enclosures or cases Prepared to accommodate VMEbus boards and drives Complies with IEC 60 297-3 and IEEE 1101.1/ 1101.10 Accessories: Backplanes, see page 60 Front panels, see page 96 Power supply units, see page 138 Air block panel for plastic guide rails, see page 182 PCB covers, see page 188 Illustration: MPS system, 9U, for VME64x Electronic Service: Modifications or custom solutions are available. The Kaparel/Rittal system specialists will assist you with planning and configuration. Option of installing 12 Euroboards (6U x 160 mm), recessed For the installation of drives or additional power supply units: 24HP Integral power supply unit, plug-in type, 6U/12HP, 270 W Including VME64x backplane, 12 slots Option of installing 12 I/O modules at the rear Front horizontal rails with 10 mm extension for injector/ extractor handles Keyable plastic guide rails Cooling from front to rear Forced ventilation with 2 RiCool radial fans, 12 V/48W (may be pulled out forwards) EMC protection, due to conductive surface finish on all components and EMC gaskets Fully assembled, pre-wired and tested 9U RiCool Hot-Swap Fan: Maximum output of 204 m 3 /h with just 1U installation space. Front Panel: With switch module and display board with LEDs see page 122. 121
Accessories VMEbus System Mains Switch Rocker switch 6 A/250V, 2-pole, FASTON connections (4.7 x 0.8 mm) VDE, UL, CSA, TÜV, SEMKO, DEMCO, SEV, NEMKO, SETI, BEAB approvals Insulation resistance: > 10 MΩ Test voltage: 1 kv Frame: 21 x 15 mm Cutout: 19.2 x 12.9 mm Installation depth: 17 mm Max. current Packs of Order No. 6 A 1 3687711 Line Cord Length Order No. Approximately 2 meters 3686338 Front Panel With LED And Line Switch Front panel with switch module and display board with LEDs. Supply Includes: EMC partial front plate, 5HP Rocker switch Display board with LEDs: +3.3 V/+5 V/+12 V/-12 V fan failure Assembly parts Legend for Order No. Order No. LED s 3U 4U +3,3 V +5 V 3687712 3687714 ±12 V Alarm Filter Module For DC Fan With Fault Monitoring The filter module serves to suppress interference on the +12 V power supply. In addition, a signal is generated in the event of a fan failure or a significant drop below the nominal speed (displayed via the LED display board). Maximum current of fan: 700 ma at an operating voltage of 12 V DC Supply Includes: 1 board 2 plug-in connections Packs of Order No. 1 3687716 122
Accessories VMEbus System Combination Unit For Mains Input Combination module consisting of IEC 320 socket, line filter and 5 x 20 mm fuse holder to IEC 320 and IEC 950. Technical Specifications: Metal enclosure for screw fastening Mains input: via IEC 320 socket Mains output: via 3 FASTON contacts (L, N, PE, 6.3 x 0.8) Versions with or without switches. Temperature range: -25 C to +85 C Supply Includes: Enclosure, with integrated IEC 320 socket, line filter M3 36 29 33.9 0.5 M3 40 29 60 0.5 Order No. Order No. Combination Combination unit with unit without switch switch 3687709 3687710 Mains voltage max. 250 VAC 250 VAC Leakage current 2 x 0.32 ma 500 µa Max. current 6 A 6 A Mounting holes 40 mm 36 mm Install. depth 90 mm 56 mm Cutout 60 x 29 mm 33.9 x 29 mm Approvals VDE, SEMKO, VDE SEV, UL, CSA max. R2.5 max. R2.5 Plastic Covers For VME Printed Circuit Boards Covers for mechanical protection of the second component side. Optionally available as a perforated or solid version. Fastening clips are required for mounting the perforated covers. Material: 0.3 mm plastic, antistatic For PCBs Packs of Order No. Solid 3U x 160 mm 1 3685626 6U x 160 mm 1 3685627 6U x 80 mm 1 3686146 Fastening clips 100 3687955 Other Accessories Backplanes, see page 60 Power supply units, see page 138 Partial front plates/handles, see page 96 Box type plug-in units, see page 187 Plastic guide rails, see page 182 Keys, see page 186 Fans, see page 220 Rack-mounted fans, see page 220 Guide rails, see page 102 123