Encoder WDG 0E www.wachendorffautomation.com/wdg0e Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum permissible loads 8hour express production Made in Germany Worldwide distributor network WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807
Encoder WDG 0E Robust hollow bore (blind) encoder with small dimensions Full connection protection with 0 VDC up to 0 VDC With light reserve Optional: 0 C up to +80 C www.wachendorffautomation.com/wdg0e Resolution Max. pulses per revolution PPR Mechanical Data Housing Flange Flange material Housing cap up to 00 PPR hollow shaft (blindbored) aluminum aluminum, powder coated. Spring plate axial: ±0.8 mm, radial: ±0. mm compensation Max. operating speed 000 rpm up to max. protection rating +60 C Housing Ø 0 mm Electrical Data Power supply/current consumption Power supply/current consumption Output circuit Pulse frequency Channels Load protection,7 VDC up to, VDC: typ. 70 m 0 VDC up to 0 VDC: typ. 70 m TTL, RS compatible, inv. HTL TTL 00 ppr: max. 00 khz HTL 00 ppr: max. 00 khz and inverted signals max. 0 m / channel circuit type H and R only Shaft(s) Shaft material Starting torque stainless steel Shaft Ø 6 mm Shaft length Insertion depth min. Insertion depth max. Max. Permissible shaft loading radial Max. Permissible shaft loading axial earings earings type approx. 0. cm at ambient temperature L: mm 7 mm 0 mm 00 0 precision ball bearings ominale service life. x 0'8 revs. at 00 % rated shaft load x 0'9 revs. at 0 % rated shaft load.7 x 0'0 revs. at 0 % rated shaft load Max. operating speed 000 rpm ccuracy Phase offset pulse/pauseratio 0 % ± max. 7 % General Data Weight Connections 90 ± max. 7. % of the pulse length approx. 00 g cable or connector outlet Protection rating (E 609) Housing: IP6, IP67; shaft sealed: IP6; (IP0 for K) Operating temperature 0 C up to +80 C Storage temperature 0 C up to +80 C More Information General technical data and safety instructions http://www.wachendorffautomation.com/gtd Options http://www.wachendorffautomation.com/acc Machinery Directive: basic data safety integrity level MTTF d Mission time (TM) 00 a a ominale service life (L0h).7 x 0'0 revs. at 0 % rated shaft load and 000 rpm Diagnostic coverage (DC) 0 % WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807
Cable connection K (IP0) with m cable K radial, shield not connected (IP0) poss. ssignments GD inv. K G K R0, R G RD VT K WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807
Cable connection K, L with m cable poss. K axial, shield not connected L axial, shield connected to encoder housing ssignments GD inv. K, L G K, L R0, R G RD K VT WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807
Cable connection K, L with m cable poss. K radial, shield not connected L radial, shield connected to encoder housing ssignments GD inv. K, L G K, L R0, R G RD K VT WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807
Connector (M6x0.7) SI,, 6, 8, pin poss. SI axial, pin, Connector connected to encoder housing SI6 axial, 6pin, Connector connected to encoder housing SI8 axial, 8pin, Connector connected to encoder housing SI axial, pin, Connector connected to encoder housing ssignments SI pin SI6 6pin SI8 8pin SI8 8pin SI pin SI pin GD inv. n. c. 6 6, 7, 8 R0, R 6 7 8 K, L M, E H C, D, F, G, J R0, R K, L M, E H C F D G, J WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807 6
Connector (M6x0.7) S, 7pin poss. S axial, 7pin, Connector connected to encoder housing ssignments S 7pin GD inv. n. c. 6, 7 WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807 7
Sensorconnector (Mx) S,,, 8, pin poss. S axial, pin, Connector connected to encoder housing S axial, pin, Connector connected to encoder housing S8 axial, 8pin, Connector connected to encoder housing S axial, pin, Connector connected to encoder housing ssignments S pin S pin S8 8pin S8 8pin S pin S pin GD inv. n. c. 6, 7, 8 R0, R 6 7 8 6 8,, 7, 9, 0,, R0, R 6 8 9 7 0,,, WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807 8
Options Low temperature The encoder WDG 0E with the output circuit types H, R is also available with the extended temperature range 0 C up to +80 C (measured at the flange). Cable length The encoder WDG 0E can be supplied with more than m cable. The maximum cable length depends on the supply voltage and the frequency; see www.wachendorffautomation.com/atd Please extend the standard order code with a three figure number, specifying the cable length in decimetres. Example: m cable = 00 Order key C Order key XXX = Decimeter WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807 9
Example Order o. Type Your encoder WDG 0E WDG 0E WDG 0E 06 06 ore size Pulses per revolution PPR: 0, 9, 0,, 0,, 8, 0, 6, 0, 0, 60, 90, 00, 0,, 8, 0, 60, 80, 00,, 0, 00,, 8, 60, 00, 00, 600, 6, 6, 70, 900, 000, 0, 080, 00, 0, 00, 800, 000, 08, 00 Other PPRs on request Channels:, bis 08 I/U Output circuit H Resolution PPR up to 00 Power supply VDC Output circuit Order key.7. TTL H0.7. TTL, RS comp., inverted R0 0 0 HTL H 0 0 HTL inverted R Electrical connections K poss. Order key Cable: length ( m standard, WDG 8T: m) radial, shield not connected (IP0) K axial, shield not connected K axial, shield connected to encoder housing L radial, shield not connected K radial, shield connected to encoder housing L Connector: (shield connected to encoder housing) connector, M6x0.7, pin, axial SI connector, M6x0.7, 6pin, axial SI6 connector, M6x0.7, 8pin, axial SI8 connector, M6x0.7, pin, axial SI connector, M6x0.7, 7pin, axial S sensorconnector, Mx, pin, axial S sensorconnector, Mx, pin, axial S sensorconnector, Mx, 8pin, axial S8 sensorconnector, Mx, pin, axial S Options Low temperature Without option Cable length Order key C Empty XXX = Decimeter Example Order o.= WDG 0E 06 0 H K WDG 0E Your encoder WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807 0
For further information please contact our local distributor. Here you find a list of our distributors worldwide. http://www.wachendorffautomation.com/distributors_worldwide.html Wachendorff utomation GmbH & Co. KG Industriestrasse 7 D666 Geisenheim Phone: +9 67 / 99 6 Fax: +9 67 / 99 6 70 EMail: wdg@wachendorff.de www.wachendorffautomation.de WDG 0E Errors and modifications reserved. Wachendorff utomation GmbH & Co. KG 0807