Modules Two-Hand Control Modules, OTB Compatible Monitors a pair of mechanical push buttons or OTB optical touch buttons. Permits machine operation only when the operator has both hands on the controls. Responds in 5 milliseconds or less. Meets Type IIIA/B requirements for Category and. Monitors the status of machine control elements. QD CABLES - & 5-Pin Mini PAGE 78 BRACKETS PAGE 90 Two-Hand Control Modules, OTB Compatible V ac/dc, 5V ac, or 0V ac Three green and one red LED indicators NEMA polycarbonate housing Standard 5 mm DIN rail track mounting Detailed Dimensions 75.0 mm 0.0 mm 5.0 mm AT-..M-A s ( Module shown) More information online at bannerengineering.com 97 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 9080-670-Main Office: (650) 588-900-Outside Local Area: (800) 58-900-www.stevenengineering.com
Modules Two-Hand Control Modules, OTB Compatible Download PDF s 5V ac 0V ac V ac/dc Inputs Output Rating Auxiliary Terminals OTB* NO amps NC Fixed Timing s TD00 (p. 9) * May also use two mechanical push buttons, each with one normally open (NO) contact. See data sheet for details. NOTE: Kits are available which include one DUO-TOUCH and two OTB Touch Buttons. OTB Touch Buttons are also available separately. See page 00. Kits e/m Relay OTB Touch Buttons Kit Includes OTB Touch Buttons & a DUO-TOUCH AT-AM-K5 DUO-TOUCH 5V ac Kit Components NO OTBA5 OTB Touch Buttons Cable* AT-AM-K5Q OTBA5QD 5-Pin Mini QD m Data Sheet 7550 AT-BM-K5 OTBB5 m 0V ac NO AT-BM-K5Q OTBB5QD 5-Pin Mini QD AT-FM-K8 OTBVR8 m V ac/dc AT-FM-K8Q OTBVR8QD 5-Pin Mini QD * For 9 m cable, add suffix W/0 to the m model number (example, AT-AM-K5 W/0). A model with a QD requires a mating cable. QD cables are ordered separately (see page 78). NO Kits Solid-State OTB Touch Buttons Kit Includes OTB Touch Buttons & a DUO-TOUCH DUO-TOUCH Kit Components OTB Touch Buttons Cable* AT-FM-K6 AT-FM-K6Q V ac/dc NO OTBVN6 & OTBVP6 OTBVN6 & OTBVP6 m -Pin Mini QD * For 9 m cable, add suffix W/0 to the m model number (example, AT-FM-K6 W/0). A model with a QD requires a mating cable. QD cables are ordered separately (see page 78). 98 More information online at bannerengineering.com Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 9080-670-Main Office: (650) 588-900-Outside Local Area: (800) 58-900-www.stevenengineering.com
and Current Protection Circuitry Modules s Specifications : 5V ac ±5% at 00 ma : 0V ac ±5% at 50 ma : V ac/dc ±5% at 50 ma Protected against transient voltages and reverse polarity (dc hookup is without regard to polarity) (K and K): Two redundant (total of four) safety relay (forced-guided) contacts Contact ratings: Max. voltage: 50V ac or 50V dc Max. current: A ac or dc (resistive load) Max. power: 000 VA, 00 watts Mechanical life: 0,000,000 operations Electrical life: 00,000 cycles (typically @.0 kva switching power) NOTE: Transient suppression is recommended when switching inductive loads. Install suppressors across load. Never install suppressors across output contacts. Output Response Time Input Requirements Simultaneity Monitoring Period Auxiliary Monitor Output (K): One non-safety relay contact Maximum switching voltage: 5V ac or dc Maximum switching current: 500 ma (resistive load) 5 milliseconds maximum from actuating devices must each be capable of switching 0 to 00 ma @ to 8V dc. 00 milliseconds (typical) < 500 milliseconds under single-fault conditions Status Indicators green LED indicators: red LED indicator: Power ON Fault K energized K energized Housing Polycarbonate. Rated NEMA ; IEC IP0 Mounting Mounts to standard 5 mm DIN rail track. must be installed inside an enclosure rated NEMA (IEC IP5), or better. Vibration Resistance 0 to 55Hz @ 0.5 mm displacement per IEC 68--6 Operating Conditions Temperature: 0 to +50 C Relative humidity: 90% @ +50 C (non-condensing) Category and per ISO 89-; Type IIIA/B per ISO 85 (EN57) (Dependent on hookup and installation of the hand controls) Certifications For a list of certifications see page 6. s AT-..M-A models: WD05 (p. 66) AT-..M-A to OTB Buttons: WD07 (p. 67) More information online at bannerengineering.com 99 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 9080-670-Main Office: (650) 588-900-Outside Local Area: (800) 58-900-www.stevenengineering.com
s WD05 Two-Hand Control Modules, OTB Compatible s AT-..M-A Page 98 s A A Power and Power switch and switch connections connections see see page 67. Figures 5a, 5b, and 5c S S X X MPCE MPCE AT-.M-A Terminal Locations L/+V dc S S K K L/-V dc Machine Control Circuit Fuse ** Fuse ** K MPCE * * MPCE * Arc Suppressors See Warning Feedback (optional) * Arc Suppressors. See manual for specific warnings. ** External fuse to protect safety contacts (for size, see Specifications) diagrams are for WD06 OTB Optical Touch Buttons Solid-State Sinking (NPN) and Sourcing (PNP) iknow AGENCY CERTIFICATIONS NPN PNP TIMING CONTACT/SWITCHING WIRING DATA TABLES s Page 0 OTBVN6.. models OTBVP6.. models Key 0-0V dc + + 0-0V dc GLOSSARY INTERNATIONAL REPRESENTATIVES = Brown = White = Blue = -Pin Euro -Pin Mini diagrams are for 66 More information online at bannerengineering.com Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 9080-670-Main Office: (650) 588-900-Outside Local Area: (800) 58-900-www.stevenengineering.com
s WD07 Two-Hand Control Modules, Actuation Device Hookups AT-..M-A Type IIIA to Two OTB Touch Buttons with Contact OTB OTB + + AT-..M-A Brown Blue Yellow Yellow A A S S S S Devices Two OTBA5.. 5V ac Two OTBB5.. 0V ac Two OTBVR8.. +V dc diagrams are for AT-..M-A Type IIIA to Two OTB Touch Buttons with PNP (Sourcing) / NPN (Sinking) OTB OTB NPN Sinking + n/c - white + PNP Sourcing AT-..M-A n/c - white Brown A A S S Blue Solid-state switches must not draw more than 5 ma each Device S S 5V ac 0V ac +V dc AT-..M-A Type IIIA to Two Mechanical Push Buttons with Contact SW SW AT-..M-A diagrams are for iknow AGENCY CERTIFICATIONS TIMING CONTACT/SWITCHING WIRING DATA TABLES A A S S GLOSSARY INTERNATIONAL REPRESENTATIVES Devices S S 5V ac 0V ac +V ac/dc diagrams are for More information online at bannerengineering.com 67 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 9080-670-Main Office: (650) 588-900-Outside Local Area: (800) 58-900-www.stevenengineering.com