Gimbal Camera Handle Manual Please read the user manual carefully before using and keep the manual for future reference

Transcription

1 Gimbal Camera Handle Manual Please read the user manual carefully before using and keep the manual for future reference This product is suitable for Mi Drone Gimbal Camera 4K-YDXJ02FM only

2 1 Package list Gimbal Camera Handle Manual Please read the manual carefully before using the product. This product is suitable for Mi Drone Gimbal Camera 4K-YDXJ02FM only Gimbal Camera Handle x1 Manual x1

3 2 Product components Protective Cover 5. Photo Button 9. Strap Hole 13. Toggle Switch 2. Microphone 6. Video/Power Button 10. Non-slip Pad 14. External MIC interface 3. Status Indicator 7. Power Indicator 11. Trigger Button 15. 1/4'' Screw Hole 4. Four-way Joystick 8. 1/4'' Screw Hole 12. Charging Port 16. Gimbal Assembly Switch

4 3 Mounting and Dismounting a. Disassemble Mi drone gimbal camera shock absorber: press the gimbal assembly switch, rotate the camera counterclockwise to the unlock position in accordance with the mark to disassemble the shock absorber. Assembly switch counterclockwise Rotate counterclockwise to unlock position press the gimbal assembly switch Disassemble gimbal camera shock absorber

5 b. Install the gimbal camera handle: Make sure that the handle is turned off. Remove the protective cover, align the gimbal camera with the red mark of the handle, rotate the camera clockwise, and hear the "click" sound, meaning it is installed in place. c. Disassemble the gimbal camera handle: press the gimbal assembly switch, rotate the camera counterclockwise at the same time to disassemble the gimbal camera. clockwise Install gimbal camera counterclockwise Disassemble gimbal camera Note: Please turn off before removing the gimbal camera.

6 4 Charging Charge your Handheld Gimbal with the provided USB cable or your data cables. Charging Not provided Note: a. Recommended to turn off before charging. b. Make sure the battery is fully charged before using it for the first time; use a 5 V 2 A power adapter, it takes about 2.5 hours to fully charge the battery. 5 Operating Instructions Make sure that the gimbal camera is properly connected to the handle. a. Turn on/turn off Turn on: press and hold the power button to turn on the Handheld Gimbal, and the indicator goes on. Turn off: press and hold the power button to turn off the Handheld Gimbal, and the indicator goes off.

7 b. Key function Four-way Joystick Move to adjust camera angles. Photo button Press to take photos in the current mode. Press and hold to turn on/off Gimbal Camera Handheld. Power / Video button Press to start shooting video in the current mode, Press a gain to stop shooting video. (Front Toggle Switch Move the toggle to " Move the toggle to " " to increase exposure value. " to decrease exposure value. Trigger Button Double press to control the camera to change position. Press and hold to lock the camera angle at pan and pitch axis. (Back Note: to avoid accidental taps during moving, press and hold photo and trigger buttons for 3 secs to enter button lock mode. To unlock, press and hold both buttons again for 3 secs.

8 c. Operating Modes Vertical mode: when the handle is vertically placed at an angle of more than 30 to the ground,the mode activates automatically. Neutral Position Trigger Button: Double press to restore the camera to the neutral position. Press and hold to lock the camera angle at pan and pitch axis. Four-way joystick:control camera angle at pan and pitch axis. Upside-down mode: when the handle is placed upside down, the mode activates automatically. Trigger Button: Double press to restore the camera to the neutral position. Press and hold to lock the camera angle at pan and pitch axis. Four-way joystick:control camera angle at pan and pitch axis. Neutral Position

9 Flashlight mode: rotate the gimbal from the vertical mode forward or backward, the vertical angle of the handle is less than 30, gimbal will automatically switch to "flashlight mode". Neutral Position Trigger button Double press to restore the camera to the neutral position. Press and hold to lock the camera angle at pan and pitch axis. Four-way joystick:control camera angle at pitch axis.

10 d. Indicators Status indicators Status Blue light on Red light blinking Red light on Battery level indicators Status Description Gimbal camera properly connected Photo/video shooting Gimbal camera connection error Description Lights on one by one Turning on Lights off one by one Turning off Lights blinking Charging Lights off Charging completed Note: When gimbal handle is turned off, short press the power / video button to view the current power.

11 6 Scan to install Mi drone app 7 Note a. Do not use Action Camera Handheld Gimbal when the temperature is below 0 C as battery capacity decreases tremendously in low-temperature conditions. b. Gimbal Camera Handheld features overcurrent protection function. The motor stops working when the device enters overcurrent protection mode, and resumes working after double pressing trigger button. c. Please make sure gimbal version is or above 2027, and camera version is or above 1076 before use.

12 8 Name and content of hazardous material in products hazardous material Name Pb Hg Cd Cr Vl PBB PBDE Plastic case Circuit board Metal Cable The form is prepared according to the regulations of SJ/T O: The content of the hazardous material in all the homogeneous materials of the part is below the required limited content of GB/T X : The content of the hazardous material exceed the required limited content of GB/T in at least one of the homogeneous materials of the part. 9 Basic specification Product name: Gimbal Camera Handle Input: 5V Model: SCYT01FM Power: 8.4W 2A Net weight: 183 g (gimbal camera not included) Operating temperature: 0 ~ 40 size : mm Battery capacity: 5000mAh Manufacturer: Beijing Fimi Technology Co., Ltd. (Mi ecological chain enterprise) Address: Room 348, 3F, Complex building A1, Yongtai Park, Qinghe Street, Haidian District, Beijing.