BRINGING THE CLASSROOM HOME 3D PRINTING IN DISTANCE EDUCATION
|
|
- Noah McCormick
- 5 years ago
- Views:
Transcription
1 BRINGING THE CLASSROOM HOME 3D PRINTING IN DISTANCE EDUCATION
2 WHAT IF
3 THERE WAS A NEW MEDIUM
4 INTRODUCING THE PEACHY PRINTER
5 3D PRINTING IN DISTANCE EDUCATION Peachy was one of the first Canadian KickStarters Raised over $651K US (>$750K CAN) I will Show why the Peachy Printer is an excellent option for Enhancing Distance Learning Introduction to the 3D Printing landscape (brief) Overview of important additional tools Potentials of 3D Printing in Distance Education
6 HOME 3D PRINTER LANDSCAPE How does the Peachy Printer compare to other Home 3D printers? 3D Printer landscape is vast and complicated Lets focus on TWO printing technologies SLA vs FDM
7 SLA: STEREO LITHOGRAPHIC Peachy Printer = SLA Uses a Laser to cure a Photopolymer resin Resin floats on rising body of salt water Laser draws the object in individual horizontal slices Cured resin stays in place as the liquid resin rises for the next slice Object is removed and final UV curing is done
8 PEACHY PRINTER IN ACTION New Prints
9 FDM: FUSED DEPOSITION MODELING A string of ABS or PLA plastic is feed into a hot extruder (Think Glue Gun) Extruder draws object layer by layer on a heated Build Plate Extruder is moved away from the Base by one layer so the new layer can be deposited When print is complete, the printed base and scaffolding are removed
10 TALE OF THE TAPE FUSED DEPOSITION MODELING (FDM) STEREOLITHOGRAPHIC (SLA) Cost $500 to $6500 (US) MakerBot $2200 US Cost $100 (CAN) Less than a Textbook One MakerBot = >25 Peachy
11 TALE OF THE TAPE FUSED DEPOSITION MODELING (FDM) STEREOLITHOGRAPHIC (SLA) Cost $500 to $6500 (US) MakerBot $2200 US Cost $100 (CAN) Less than a Textbook One MakerBot = >25 Peachy Size & Weight Large >50cm 3 and >40Kg Small 25cm 3 and >5Kg Size & Weight ~16cm x 10cm x 8cm ~500g
12 TALE OF THE TAPE FUSED DEPOSITION MODELING (FDM) STEREOLITHOGRAPHIC (SLA) Material Excessive material waste Must print a Base Must print Scaffolding High print failure rate 1 in 4 successful Material Material Efficient Minimal base required No Scaffolding (mostly) High print success rate
13 TALE OF THE TAPE FUSED DEPOSITION MODELING (FDM) STEREOLITHOGRAPHIC (SLA) Material Excessive material waste Must print a Base Must print Scaffolding High print failure rate 1 in 4 successful Speed SLOW 4-7 Hours for a Tiny print Large prints can take hours Material Material Efficient Minimal base required No Scaffolding (mostly) High print success rate Speed Less Slow 2-3X faster (minimum) Smaller containers, higher powered lasers. Can increase Speed
14 TALE OF THE TAPE FUSED DEPOSITION MODELING (FDM) STEREOLITHOGRAPHIC (SLA) Environmental Sensitivities Temperature Air movement (temp) Environmental Sensitivities Excessive vibrations can cause ripples on print job
15 TALE OF THE TAPE FUSED DEPOSITION MODELING (FDM) STEREOLITHOGRAPHIC (SLA) Environmental Sensitivities Temperature Air movement (temp) Environmental Sensitivities Excessive vibrations can cause ripples on print job Other Aspects Requires ventilation and/or air filtering (expelled particles) Studies show that PLA has the lowest expelled particles Other Aspects Silent operation Variable print volume (pick your container) Avoid direct skin contact with resin and uncured print jobs Resins have an odor (ventilate or enclose print container)
16 3D PRINTING IN DISTANCE EDUCATION $100 Ships in a tiny box Snaps together like Lego (mostly) It s Canadian eh!! This can change the landscape of Teaching and Learning with Physical objects
17 RESINS HUNDREDS of different resins (so lets be brief)
18 RESINS: TRANSLUCENT
19 RESINS: OPAQUE
20 RESINS: RUBBERY & FLEXIBLE Rubbery & Flexible Resins
21 RESINS: CERAMICS Ceramic Resin
22 RESINS: HARDNESS
23 RESINS: SHRINKAGE Objects will Shrink after printing MakerJuice resins shrink up to 8% FTD resins shrink about 0.5% Multi-part assemblies Gears, Linkages, etc Multi-part assemblies with multiple resins will need to be carefully planned
24 RESINS: MANUFACTURES Transparent / Mixable MakerJuice (PeachyJuice) Opaque, Hard, Chemically resistant Fun To Do (FTD) Ceramics HRL Laboratories Tethon (Porcelite) Many more!
25 PRECAUTIONS DO NOT Make printed items for use with Food DO NOT Make toys for babies or young children BE SURE To fully UV cure your resin-based print jobs
26 SO YOU OWN A 3D PRINTER
27 NOW WHAT!?!
28 FIND A MODEL CREATE A MODEL SCAN A MODEL
29 FIND A MODEL Many pre-made 3D models are available on the Internet Thingiverse.com 3Dprint.NIH.com MorphoSource.org
30 CREATE A MODEL 3D Modeling Software Choose one that has excellent documentation and an active community (online forums) Pay attention to: What does it run on? Pay model (one time, Subscription) Local or Cloud Where are my files???
31 CREATE A MODEL Mac PC Linux ipad Web Pay Install Cheetah 3D v7 1 Local Autodesk 123D Design Autodesk Fusion-360 Sub Sub Local Local Sketchup 1 Local Blender Free Local umake GravitySketch 1 Local 1 Local FreeCAD Free Local
32 GRAVITYSKETCH GravitySketch.com
33 SCAN A MODEL Hardware and Software combination required 3 Types of scanning Hardware Turn table Multi-Camera Sensors Cell Phones
34 PEACHY SCANNER Peachy Scanner
35 MAKERBOT DIGITIZER ONLY. $799 US
36 OCCIPITAL STRUCTURE SENSOR Occipital Structure Sensor $349 US
37 KINECT Multi camera sensor (like Structure sensor) Software for Kinect Scanning KScan3D Skanect ReconstructMe others Kinect for XBox (x2), Kinect for Windows Match your Software to your Hardware!!
38 CELL PHONES Scan objects with your cell phone Autodesk 123D Capture Take 40+ pictures around object Photos sent to Autodesk & processed 3D object returned to phone May have unwanted objects in scene Edit in 3D modeling software Cell phones may come with 2 cameras in 2017 Similar capabilities to Structure & Kinect
39 THE BIG QUESTION HOW CAN PHYSICAL MODELS ENHANCE TEACHING & LEARNING?
40 SCIENCE Lab Equipment Clamps, Scissor jacks, custom brackets Ceramic items, Rotators/Mixers, etc Wind based power generation Weather Stations Custom cases for field equipment Drones & other small remote vehicles Molecular Chemistry Models Telescopes
41 SCIENCE - ULTRASCOPE OSA UltraScope
42 SCIENCE Archeology Sculptures, bones Recreations of Tombs and Cities Biological Models Body Model by Jordan Pelovitz National Institute of Health HUGE Resource!!
43
44
45
46 SCIENCE - 3DPRINT.NIH.GOV Anatomical Heart Library (abnormalities) Labware Molecule of the Month Neuroscience Prosthetics
47 ENGINEERING Mechanical Systems Gears, Linkages, Connectors, etc Robotics roboteurs.com Robotics Kits for education University Kits planned 3D printed AT-AT Walker
48 ENGINEERING - ROBOTICS Star Wars AT-AT Walker
49 MATHEMATICS Illustrating Mathematics using 3D Printing Paper by Oliver Knill & Elizabeth Slavkovsky Published June 20th 2013 Harvard University Covers dozens of Theorems
50 MATHEMATICS Newton Illustrates that the kissing number of a sphere is >=12
51 MATHEMATICS Dehn Twisted Flat Torus & Untwisted Torus Can NOT be printed on an FDM printer
52 MATHEMATICS Using physical objects to illustrate Mathematics is not new!!
53 MATHEMATICS - TABLET Cuneiform Tablet
54 ARCHITECTURE Visualization & Modelling is a critical part of the Architectural design process 3D Modelling creates the visualization 3D Printing brings the design to life Its a natural fit
55 ART & DESIGN 3D Printing brings Endless Expressiveness Fashion, Jewelry Theatrical Props Stop Motion Animation Historical / Museum piece reproductions
56 ART & DESIGN
57 ART & DESIGN
58 ART & DESIGN
59 OLO PRINTER PROs Inexpensive and easy to ship Uses existing Cell Phone CONs Small print area Print screen replacement every 3 prints Daylight resins still expensive Uses existing Cell Phone FUTURE Larger models & lower cost resins
60 IMAGINE THE POSSIBILITIES!!! Peachy & OLO Inexpensive and easy to ship Can print complex models Multitude of Print Materials available 3D Printing is an Enabling Technology A new Dimension of Creativity Personal Empowerment Takes learning to a whole new level!!!
61 UPDATE #64 MAY 10TH 2016 Big Bad News
62 JASON HOGUE TRU - Open Learning Program Delivery jhogue@tru.ca
3D printing as an inspiring technology for challenges in 21 st century
3D printing as an inspiring technology for challenges in 21 st century Marianna Zichar zichar.marianna@inf.unideb.hu/homepage University of Debrecen Faculty of Informatics HUNGARY 18.05.2017, Valencia
More information3D Printing in the FIRST Community. IN FIRST FORUMS Rufus Cochran 10/22/2016
3D Printing in the FIRST Community IN FIRST FORUMS Rufus Cochran 10/22/2016 Hello, I am Rufus Cochran 447 student from 2001 to 2006 From Co-Operation FIRST to Aim High FIRST mentor for a decade 447 and
More information3D Printing. Rob Miles. Department of Computer Science University of Hull
3D Printing Rob Miles Department of Computer Science University of Hull Agenda 3D Printing Overview 3D Printing Workflow Design something and Print it The future of 3D Printing 2 Printing Not that many
More information3D PRINTING 1. INTRODUCTION 2. HISTORY 3. GENERAL PRINCIPLES 4. WORKFLOW 5. APPLICATIONS 6. CONCLUSION CONTENT: 12 DECEMBER 2017 PETR VALENTA
3D PRINTING 1 12 DECEMBER 2017 PETR VALENTA CONTENT: 1. INTRODUCTION 2. HISTORY 3. GENERAL PRINCIPLES 4. WORKFLOW 5. APPLICATIONS 6. CONCLUSION 1. Introduction 2 2005 2007, Software: Blender 1. Introduction
More information3D Printing. Rob Miles. Department of Computer Science University of Hull
3D Printing Rob Miles Department of Computer Science University of Hull Agenda 3D Printing Overview 3D Printing Workflow Design something and Print it The future of 3D Printing Printing Not that many years
More informationJill Conlin Engineering Teacher College Station High School College Station ISD
Jill Conlin Engineering Teacher College Station High School College Station ISD Agenda What is 3D printing? What Can You 3D print? Tools for Printing Available 3D Printers Software E3 Program Research-
More information3D PRINTING TECHNOLOGY
ABSTRACT 3D PRINTING TECHNOLOGY Mrs. Rita S. Pimpalkar Mr. Akshay D. Gosavi Mr. Pavankumar K. Godase Mr. Nandkishor B. Gutte 3D printing is a process of making a three -dimensional solid objects from a
More information3D Printing. Kenny George
3D Printing Kenny George What is 3D printing 3D printing is form or rapid prototyping that allows for one off manufacturing of physical objects. There are many types of 3D printing applications: SLS -
More informationStar Trek TNG 1987 Replicator
Star Trek TNG 1987 Replicator Engineering Technology Department Three Programs Leading to A.S. Degree Manufacturing Engineering Technologist Nano Engineering Technology Industrial Engineering Technician
More informationTTH 3D Printing Handbook
A Guide to Understanding and Applying the 3D Printing Process Page 2 The technology and techniques of 3D printing and additive manufacturing have drastically changed and improved over the years. These
More information3D Printing: With POLAR3D
3D Printing: With POLAR3D Buttercup The Duck Buttercup The Duck Nike Prototype Nike Prototype ow does 3D Printing work? What is 3D Printing? Additive Manufacturing is the process of making a 3D, solid
More information3D Printing A Processing Approach CONTENTS
3D Printing A Processing Approach 1 CONTENTS 3D Printing Workflow Digital Modeling Simple Rules for Printable Model Digital Modeling Tools Case 1 Battery Cover Case 2 Housing Case 3 Broken Edge Repair
More informationFigure 1
Figure 1 http://www.geeky-gadgets.com/wp-content/uploads/2013/11/robox-3d-printer5.jpg Table of Contents What 3D printing is... 1 How does 3D Printing work?... 1 Methods and technologies of 3D Printing...
More informationWIZ-PRO2 CURRICULUM HIGHLIGHTS
WIZ-PRO2 CURRICULUM HIGHLIGHTS STEM Learning and Advanced Robotics (ages 9-11) Develop more advanced programming skills, create programs using lines of code in Scratch, use more powerful robotics components
More informationPRODUCT CARD. Skriware 3D printing educational ecosystem
PRODUCT CARD Skriware 3D printing educational ecosystem 3D MODELS LIBRARY Skrimarket Virtual 3D models library. A cloud solution integrated with MyMiniFactory with 45,000 3D models available to 3D print
More informationWell Link Industries Limited
Well Link Industries Limited 3D Printing 3D printing is no longer a science fiction. It helps to change from prosthetics and regenerative medicine to structures in space. In 2013, second term State of
More informationWho Are We? Who is CTC? 10/13/2017. Simulation 2017: Collaborate, Create, Elevate
Who Are We? Josh Radle 3 years at CTC Experience: VR, 3D Printing, Training, Visualization Software A.A. in 3D Art & Animation A.A. in Visual Effects and Motion Graphics Kiefer Paulson 3D Generalist, Game
More informationCOMPILED BY MAKERBOT EDUCATION
COMPILED BY MAKERBOT EDUCATION Copyright 2015 by MakerBot www.makerbot.com All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means,
More informationINNOVATIONS IN 3D PRINTING MATERIALS FOR ADDITIVE MANUFACTURING. Dr Mike J Idacavage, Amelia Davenport and Dr Neil Cramer
INNOVATIONS IN 3D PRINTING MATERIALS FOR ADDITIVE MANUFACTURING Dr Mike J Idacavage, Amelia Davenport and Dr Neil Cramer Introduction Prototyping Targeted Performance Properties Improve the dimensional
More information3D Printed Droid Parts
3D Printed Droid Parts 1 8/6/13 02:45:36 PM Outline Background of 3D Printing Typical 3D Printers The 3D Printing Process 3D Printing Capabilities & Limitations Designing Parts for 3D printing Foibles
More information3D Printing Technologies and Materials. Klaus Gargitter
3D Printing Technologies and Materials Klaus Gargitter Agenda 3D Printing Technologies and Materials 3D printing technologies SLA /DLP CLIP/CDLP Material Jetting SLS FDM Near Future 3D Printing technologies
More informationRevamp High School Engineering, Technology and STEM Courses on Any Budget
1 Revamp High School Engineering, Technology and STEM Courses on Any Budget Teaching students to apply science, technology, engineering, and math (STEM) concepts to solve complex, open-ended problems in
More informationda Vinci Super Quick Guide da Vinci Super Safety Precautions Product instructions Unboxing and Installation Product specification
September. 2017 da Vinci Super Quick Guide ENG Safety Precautions Product instructions Unboxing and Installation Product specification Function Operation and Instructions Setting Print Supporting information
More informationVisual Imaging in the Electronic Age Assignment #3 Draft Geometry Capture
Visual Imaging in the Electronic Age Assignment #3 Draft Geometry Capture Assigned: October 5, 2017 Due Date: TBA (October 2017) The above image is of the sculpture by James Mahoney, which was demonstrated
More information3D SCANNING FOR 3D PRINTING: MAKING REALITY DIGITAL AND THEN PHYSICAL AGAIN. Michael Raphael Founder & CEO
3D SCANNING FOR 3D PRINTING: MAKING REALITY DIGITAL AND THEN PHYSICAL AGAIN ) Michael Raphael Founder & CEO mraphael@dirdim.com 410-998-0880 3D Scanning vs. 3D Printing Both over 20 years old, actually
More informationDräger UCF 6000 Thermal Imaging Camera
Dräger UCF 6000 Thermal Imaging Camera Missing important details at a fire scene can place lives at risk. But fire, smoke and darkness make visibility and navigation difficult. The UCF 6000 thermal imaging
More information1 HP Ersatzteile für LaserJet 3030
HP Ersatzteile für LaserJet 00 Scanner Assembly - Assembly View Q-0 Q-009 Q-0 Q-000 Automatic document feeder (ADF) and flatbed scanner lid - Includes the lid and the ADF feed mechanism - Mounts on top
More informationUser Manual. Bedal 3S. Welltec-UM-Bedal_ Rev.03
User Manual Bedal 3S Welltec-UM-Bedal_170329 Rev.03 Contents Introduction Introduction 2 Operating Condition 3 About Bedal 4 Specifications 5 Description of Units 6 Installation Enclosed Parts 8 H/W Installation
More informationIntroducing the Stratasys F123 Series
Introducing the Stratasys F123 Series Stratasys Webinar February, 2017 1 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY Presenters Gina Scala Director of Global Education, Stratasys Michael Block Education
More informationIntro to 3D Printing. Stelian Coros
Intro to 3D Printing Stelian Coros What is it and how does it work? *additive manufacturing An Example An Example 3D Printing: how it started Chuck Hull, father of 3D Printing Came up with the idea in
More informationContinuous Ink Supply System for CANON PIXMA IP4200. Installation Instruction
Continuous Ink Supply System for CANON PIXMA IP4200 Installation Instruction For ST Prefilled Version With Original Chips This Version of the Continuous Ink Flow System comes with Prefilled Cartridges
More information2D & 3D Animation NBAY Donald P. Greenberg March 21, 2016 Lecture 7
2D & 3D Animation NBAY 6120 Donald P. Greenberg March 21, 2016 Lecture 7 2D Cel Animation Cartoon Animation What is cartoon animation? A sequence of drawings which, when viewed in rapid succession, create
More informationVINTAGE COMPUTER DESIGN AND REPAIR WITH 3D PRINTING J. ALEXANDER JACOCKS
VINTAGE COMPUTER DESIGN AND REPAIR WITH 3D PRINTING J. ALEXANDER JACOCKS INTRODUCTION A BRIEF HISTORY OF 3D PRINTING 1981: Hideo Kodama, from Nagoya Municipal Industrial Research Institute, describes a
More informationDreamer Series User Manual
Dreamer Series User Manual Welcome to the world of the Dreamer. To ensure that you have the best possible user experience, it s important that you follow this user manual. Let s get started! In Parts I
More information3D Printing For Dummies Ebooks Free
3D Printing For Dummies Ebooks Free Get started printing out 3D objects quickly and inexpensively! 3D printing is no longer just aâ figment of your imagination. This remarkable technology is coming to
More informationAdditive Manufacturing (AM) in a Nutshell Spring 2016 Nick Meisel
Additive Manufacturing (AM) in a Nutshell Spring 2016 Nick Meisel Additive vs. Subtractive Manufacturing Traditional subtractive manufacturing involves the removal of unwanted material from a block of
More informationCustomer Responsibilities
For Research Use Only. Not for use in diagnostic procedures. Thank you for purchasing the Agilent G5590A BenchCel Workstation. To get you started and to assure a successful and timely installation, please
More information3d Building Model Printing
Volume 6 Issue V, May 2018- Available at www.ijraset.com 3d Building Model Printing Vidula Waskar 1, Gautami Ugale 2, Akshaya Taralekar 3 1 Assistant Professor, 2, 3 Student, Department of Civil Engineering,
More informationCNC Based 3D Printer using Arduino
CNC Based 3D Printer using Arduino Prof. Sanjay Sonar 1, Deepak Tiwari 2, Rahul Wagh 3, Snehal Utekar 4, Ashwini Thete 5 1 Prof. Sanjay V. Sonar,Electronics and Telecommunication Engineering, Konkan Gyanpeeth
More informationFLAMINGO CHEAT SHEET FOR ES 305 CLASS 5 Pages of Fresh Flamingo Goodness
FLAMINGO CHEAT SHEET FOR ES 305 CLASS 5 Pages of Fresh Flamingo Goodness *Keep this PDF with you at all times it will help you to maneuver the vast and confusing ocean that is the Flamingo Materials Editor!
More information3D Printing Getting Started!
ARCHITECTURE & LANDSCAPE ARCHITECTURE 3D Printing Getting Started! White filament is free to students for academic use. Where do I buy filament? NORTH DAKOTA STATE UNIVERSITY www.makerbot.com/store www.ultimachine.com/pla
More information3D Printing For Dummies
3D Printing For Dummies Kalani Kirk Hausman, Richard Horne ISBN: 978-1-118-66075-1 384 pages January 2014 Description Get started printing out 3D objects quickly and inexpensively! 3D printing is no longer
More informationXD10. High Resolution Desktop 3D Printer
XD10 High Resolution Desktop 3D EXTRUSION Single-feed Bowden tube All-metal hotend and feeder Extrusion temperature up to 300 C Included nozzle: 0.2 mm BUILD CHAMBER Enclosed, illuminated chamber Build
More information3D Printer Overview 2013
1 PERSONAL 3D PRINTERS Cube Home 3D Printer Our first 3D printer designed to bring your creations to life in brilliant colors right in your home just plug in and print! Wi Fi Printing Print up to a 5.5
More informationTCT Mobile Limited Martell lite
Martell lite one touch 992D Note: this manual is non-contractual and can modify it without prior notice on the characteristics of described equipments. 1/39 1.0 2012-10-16 Updated according to CPM s comment
More informationda Vinci 1.0 Pro Quick Guide
US da Vinci 1.0 Pro Quick Guide Product Description Print Parameters Description Support Details Product Model: da Vinci 1.0 Professional da Vinci 1.0 Pro Product Description Product Overview Cartridge
More informationUser Safety. Electrical Safety. Phaser 4500 Laser Printer
User Safety Your printer and the recommended supplies have been designed and tested to meet strict safety requirements. Attention to the following information will ensure the continued safe operation of
More informationCARTRIDGE REMANUFACTURING INSTRUCTIONS TONER CARTRIDGE DRUM CARTRIDGE
XEROX PHASER 7400 CARTRIDGE REMANUFACTURING INSTRUCTIONS TONER CARTRIDGE DRUM CARTRIDGE REMANUFACTURING THE XEROX PHASER 7400 TONER & DRUM CARTRIDGES By Mike Josiah and the Technical Staff at UniNet The
More informationTOPOGRAPHY - a LIDAR Simulation
Title TOPOGRAPHY - a LIDAR Simulation Grade Level(s): 9-12 Estimated Time: 1.5 hours Discussion of Technology: Appendix A Construction Details: Appendix B MSDE Indicator(s) Goal 1: Skills and Processes
More informationElmhurst Public Library Create, Make, and Build
3D PRINTING BASICS WHAT IS 3D PRINTING? A 3D printer works essentially like a traditional printer except it prints in plastic layers to make 3-dimensional designs. 3D printers can print in several different
More information3D PRINTER USING ARDUINO 644p FIRMWARE
International Journal of Recent Innovation in Engineering and Research Scientific Journal Impact Factor - 3.605 by SJIF e- ISSN: 2456 2084 3D PRINTER USING ARDUINO 644p FIRMWARE Samarshi Baidya 1, Manyala
More informationStratasys 3D Printing Systems
Stratasys 3D Printing Systems Alessio Caldano Technimold 1 ST RATASYS / THE 3D PRINTING SOLUTIONS COMPANY 2 ST RATASYS / THE 3D PRINTING SOLUTIONS COMPANY ABOUT 3D PRINTING ABOUT STRATASYS We help designers,
More informationStereolithography Printers. Prototypes, tools and production parts with ProJet and ProX SLA 3D printers
Stereolithography Printers Prototypes, tools and production parts with ProJet and ProX SLA 3D printers The Original, and Most Accurate, 3D Printing Technology, Fine Tuned for Even Greater Speed and Reliability
More informationPrototyping Your Model Using 3D Printing and CNC Technology
Youth Explore Trades Skills Design and Drafting 3D Modelling (Architectural CAD) Prototyping Your Model Using 3D Printing and CNC Technology Description In this activity, the teacher will discuss and demonstrate
More information3D printing Is it Good Enough for Scale Model Boat Builders?
Lew Zerfas Web Site: LewsModelBoats.org Email: info@lewsmodelboat.org Phone: 727-698-4400 a builder of scale model operating boats, including kits, highly modified kits, and scratch built models. A retired
More informationChapter 25-3D Printing Tools
3D printing (also called rapid prototyping) has become a hot topic in recent years. They are great tools to bring your 3D designs into the real world and Blender can be a great tool to use to design those
More informationA Brief Talk on the 3D Scanning Reconstruction Program Based on Kinect and its Application Wang Yongsheng1, a, Zhang Qizhi2, b,* and Liu Xiao2, c
2nd International Conference on Machinery, Electronics and Control Simulation (MECS 2017) A Brief Talk on the 3D Scanning Reconstruction Program Based on Kinect and its Application Wang Yongsheng1, a,
More informationThree-Dimensional Computer Animation
Three-Dimensional Computer Animation Visual Imaging in the Electronic Age Donald P. Greenberg November 29, 2016 Lecture #27 Why do we need an animation production pipeline? Animated full-length features
More information3D Printing Process Using Fused Deposition Modelling (FDM)
3D Printing Process Using Fused Deposition Modelling (FDM) Miss Urvashi Damor 1, Prof. Tushar J Raval 2, Prof. Karishma A chaudhary 3 1 M.tech Student, Computer engineering, L.D. College of Engineering,
More informationMaximum materials in a compact
Objet260 ConnexTM The most coveted entry-level multi-material 3D printer. Build precise, multi-material prototypes. The Objet260 Connex gives you the power to simulate the precise look, feel and function
More informationRapid Prototyping Technologies
15-294 Rapid Prototyping Technologies Instructor: Dave Touretzky TAs: Meg Richards Adam Moran Chase Klingensmith 5.0 Units / 7 Weeks (Mini) http://www.cs.cmu.edu/afs/cs/academic/class/15294t-s16 1 2 Three
More informationSharif University of Technology. Session # Rapid Prototyping
Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # Rapid Prototyping Contents: Rapid prototyping and manufacturing RP primitives Application
More informationB&W RearView Camera Installation & Operation
B&W RearView Camera Installation & Operation CA52 (Camera) FOR MORE INFORMATION WWW.STRATEGICVISTA.COM BEFORE OPERATING THIS SYSTEM, PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE
More information============================================================================
25 Free 3D modeling softwares Posted by Waldo - 2011/11/08 14:23 I thought this link may come in handy to a few designers out there. 25 Free Modeling Softwares Posted by admin - 2011/11/08 18:51 Blender
More informationK Service Source. StyleWriter
K Service Source StyleWriter K Service Source Basics StyleWriter Basics Introduction - 1 Introduction The StyleWriter is a serial bubble jet ink-on-demand printer. The StyleWriter prints up to 1/3 page
More informationSTEREOLITHOGRAPHY PRINTERS. Prototypes, tools and production parts with ProJet and ProX SLA 3D printers
STEREOLITHOGRAPHY PRINTERS Prototypes, tools and production parts with ProJet and ProX SLA 3D printers The original, and most accurate, 3D printing technology, fine tuned for even greater speed and reliability
More informationThe Future of 3D Printing. Michael Wilson 3M Buckley Innovation Centre, Huddersfield
The Future of 3D Printing Michael Wilson 3M Buckley Innovation Centre, Huddersfield What will be covered What the 3D printing process is like What is on the horizon in terms of Potential business threats
More informationFAZE 800 FT PRO USER MANUAL. Version: 1.2. ROBE Lighting s.r.o. Czech Republic
FAZE 800 FT PRO USER MANUAL Version: 1.2 ROBE Lighting s.r.o. Czech Republic www.robe.cz FAZE 800 FT PRO Table of contents 1. Introduction 4 2. Cautions 4 3. Opening the package and inspecting the machine
More informationFunctionality of Additional Parts and Peripherals Such as Printer and Web Cam Contributor Meera Hirani Std 2. Reviewer. s Approval
Title Functionality of Additional Parts and Peripherals Such as Printer and Web Cam Contributor Meera Hirani Std 2 Reviewer Farida Submission Date of sending the content s Approval Date of inclusion into
More informationLeica BLK360 Questions & Answers. Vers
Questions & Answers Vers. 11.01.2017 What is it? 2 What is it? 3 What is it? Calibrated full spherical image, LED flash support 4 What is it? 5 A new, simple way to capture reality Speed On-the-fly image
More informationContest Description 3D Game Art Post-Secondary
1. Purpose of the Contest To provide competitors with the opportunity to experience the production process and demonstrate their knowledge and skill. The 3D Digital Game Artist takes a designer s brief
More information3D Printing and Illustrating Mathematics
3D Printing and Illustrating Mathematics Elizabeth Denne http://home.wlu.edu/ dennee/math_vis.html Washington & Lee University Women s Intellectual Network Research Symposium, UVA September 15, 2018. Outline
More informationWe have two types of plastic printer (Makerbot and Up) and one powder printer at School of Architecture.
3D printers are rapid prototyping tools which make solid, threedimensional objects out of melted plastic filament. Digital models are translated into instructions for the 3D printer (3d models are converted
More informationV /06/ Velleman nv
DC LAB POWER SUPPLY WITH DUAL LED DISPLAY DC-LABVOEDING - DUBBELE LED-DISPLAY ALIMENTATION DE LABORATOIRE DC À DOUBLE AFFICHEUR LED ALIMENTACIÓN DC PARA LABORATORIO CON DOBLE DISPLAY LED DC-LABORNETZGERÄT
More informationDESIGN AND DEVELOPMENT OF A FUSED DEPOSITION MODELLING RAPID PROTOTYPING MACHINE
International Journal of Advances in Scientific Research and Engineering (ijasre) E-ISSN : 2454-8006 Vol.3, Special Issue 1 Aug - 2017 DESIGN AND DEVELOPMENT OF A FUSED DEPOSITION MODELLING RAPID PROTOTYPING
More informationDNG-200 LOW FOG GENERATOR USER MANUAL DNG-200 低煙機使用說明書
DNG-200 LOW FOG GENERATOR USER MANUAL DNG-200 低煙機使用說明書 Read and save these insturctions 2008 Antari Lighting & Effects Ltd. User Manual Antari DNG-200 Low fog Generator Congratulations on the purchase
More informationTHE XEROX PHASER 7400 TONER & DRUM CARTRIDGES
THE XEROX PHASER 7400 TONER & DRUM CARTRIDGES DOC# 0403 By Mike Josiah and the technical staff at Summit Technologies a Division of Uninet Imaging. XEROX PHASER 7400 TONER & DRUM CARTRIDGE REMANUFACTURING
More informationXEROX PHASER 5500 TONER & DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
XEROX PHASER 5500 TONER & DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 5500 TONER CARTRIDGE XEROX PHASER 5500 DRUM CARTRIDGE REMANUFACTURING THE XEROX PHASER 5500 TONER & DRUM CARTRIDGES By
More information3D Printing Getting Started!
ARCHITECTURE & LANDSCAPE ARCHITECTURE 3D Printing Getting Started! White filament is free to students for academic use. Where do I buy filament? NORTH DAKOTA STATE UNIVERSITY www.makerbot.com/store www.ultimachine.com/pla
More informationCustomer Responsibilities
For Research Use Only. Not for use in diagnostic procedures. Thank you for purchasing an Agilent G5573A Bravo NGS Option A. To get you started and to assure a successful and timely installation, please
More informationS.A.S 3D SPARK PVT LTD
S.A.S 3D SPARK PVT LTD 3D PRINTING Advantage at every phase of creationfrom initial concept design to the production of final products. www.sas3dspark.com o m 3D Printing 3D Printers can be used in a lot
More informationDAZZ LCD SLA 3D PRINTER
DAZZ LCD SLA 3D PRINTER Many low cost 3D printers on the market make big promises, but failed to deliver the high-quality printings. That is why we created the Dazz 3D LCD 3D printer, a professional grade
More informationGuide: 3D Printing Software: UP, Makerbot P 1
Guide: 3D Printing Software: UP, Makerbot 02-09-2015 P 1 Disclaimer P 2 We can t guarantee your model will successfully print as there are many factors which can affect it. The guideline will help you
More information5.6 Color Rear View Safety System Installation & Operation. RV56 (Includes MO56 monitor & CA56 camera)
5.6 Color Rear View Safety System Installation & Operation RV56 (Includes MO56 monitor & CA56 camera) FOR MORE INFORMATION WWW.STRATEGICVISTA.COM BEFORE OPERATING THIS SYSTEM, PLEASE READ THIS MANUAL THOROUGHLY
More informationReality Capture using: RPAS Technologies & Image Laser Scanners
Reality Capture using: RPAS Technologies & Image Laser Scanners by Johan Erasmus (RPAS Technologies) & Barend Bornman (Image Laser Scanners) from Aciel Geomatics Laser Scanners High-Definition Surveying
More informationChapter 7: Fundamental Printers and Scanners
Chapter 7: Fundamental Printers and Scanners IT Essentials: PC Hardware and Software v4.1 1 Chapter 7 Objectives 7.1 Describe the types of printers currently available 7.2 Describe the installation and
More informationThree-Dimensional Computer Animation
Three-Dimensional Computer Animation Visual Imaging in the Electronic Age Donald P. Greenberg November 28, 2017 Lecture #24 Luxo & Luxo Jr. 1986 Toy Story 1995 Finding Dory 2016 3D Animation Pixar Why
More informationKM-4800w. Installation Guide
KM-4800w Installation Guide TABLE OF CONTENTS page 1 Installation Requirements 2 2 Unpacking 3 2. 1 Unpacking 3 2. 2 Confirmation of Accessories 5 3 Leveling the Machine 7 4 Setup of the Roll Deck 9 5
More informationReflow Kit V3 PRO Instruction Manual
Reflow Kit V3 PRO www.beta-estore.com Beta LAYOUT Ltd. Bay 98 Shannon Free Zone, Co. Clare Ireland Telefon +353 (0) 61 70 11 70 Fax +353 (0) 61 70 11 65 Contents 1. V3 PRO Components...3 1.1 Reflow-Oven...
More informationSHENZHEN GETECH TECHNOLOGY CO., LTD. Geeetech A10 3D Printer. User Manual (V2.0)
Geeetech A10 3D Printer User Manual (V2.0) 1 Content 1 Attention... 3 1.1 Safety instruction... 3 1.2 Factory test before delivery... 3 2 Printer display... 4 3 Assembling... 7 3.1 Assembling the main
More informationst ANNUAL SKILLS MANITOBA COMPETITION CONTEST DESCRIPTION
2018 21st ANNUAL SKILLS MANITOBA COMPETITION CONTEST DESCRIPTION CONTEST NAME: 3D Digital Game Art CONTEST NO: CATEGORY: Secondary CONTEST LOCATION: TBA CONTEST START TIME AND DURATION: Time Task 8:00
More informationNot For Sale. Glossary
Glossary Actor A sprite and the role it plays as it interacts with another sprite on the stage. Animated GIF A graphic made up of two or more frames, each of which is displayed as an automated sequence
More informationDräger UCF 8000 NFPA Certified Thermal Imaging Camera
Dräger UCF 8000 NFPA Certified Thermal Imaging Camera Fires and other hazardous environments pose unseen challenges and dangers. Now you can know before you go with the Dräger UCF 8000 thermal imaging
More informationChapter Three. Hardware Basics: Peripherals
Chapter Three Hardware Basics: Peripherals After reading this chapter, you should be able to: List examples of input devices and explain how they can make it easier to get different types of information
More informationRESTRICTED WORLD TRADE G/IT/SPEC/8/Rev.1 23 February 1998 ORGANIZATION PROPOSED ADDITIONS TO PRODUCT COVERAGE. Submission by Australia.
RESTRICTED WORLD TRADE G/IT/SPEC/8/Rev.1 23 February 1998 ORGANIZATION (98-0664) Committee of Participants on the Expansion of Trade in Information Technology Products Original: English PROPOSED ADDITIONS
More informationAutomated Sl Selective Laser Assembly System
Automated Sl Selective Laser Assembly System Ray Prasad Ray Prasad Consultancy Group President, BeamWorks Inc (2000-2006) Spark 400 Note: BeamWorks Ltd, an Israeli Based Company filed for Liquidation in
More informationProduct User Manual. IdeaWerk 3D Printer WT150
Product User Manual IdeaWerk 3D Printer WT150 Contents Contents 1. Unpack and checking... 1 1.1 Check the Machine... 1 1.2 Check the Accessories... 3 2. Brief Introduction... 3 2.1 Precautions and Safety...
More informationSHENZHEN GETECH TECHNOLOGY CO LTD. Geeetech A10M 3D Printer. User Manual (v2.0)
Geeetech A10M 3D Printer User Manual (v2.0) 1 Content 1 Attention... 3 1.1 Safety instructions... 3 1.2 Factory test before delivery... 3 2 Printer display... 4 3 Assembling... 7 3.1 Assembling the main
More informationReflow Kit V3 PRO Instruction Manual
Reflow Kit V3 PRO www.beta-estore.com Beta LAYOUT Ltd. 765 Eubanks Drive Suite B1 Vacaville, CA 95688 USA Tel: +1 (707) 447 7744 Fax: +1 (707) 447 0896 Contents 1. V3 PRO Components... 3 1.1 Reflow-Oven...
More informationA laser beam is then directed into the liquid, (guided by the 3d file you ve made), solidifying the areas it comes in contact with.
1 Stereolithography is a technique where the parts are manufactured by building up successive thin layers of hardening resin. The process takes place in a large tank, and begins when a layer of liquid
More information