Cree XLamp XP-E High-Efficiency White LEDs

Transcription

1 PRODUCT FAMILY DATA SHEET CLD-DS34 REV 0 Cree XLamp XP-E High-Efficiency White LEDs PRODUCT DESCRIPTION XLamp XP-E High-Efficiency White LEDs upgrade the XLamp XP-E to leading performance levels for diffuse lighting applications. XP-E HEW is designed to enable faster adoption of LED light in cost-sensitive, consumer lighting products. Compared to the standard XLamp XP-E, XP-E HEW can reduce LED count by 50% and still deliver the same system performance. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, including color-changing, portable and personal, outdoor, indoor-directional, transportation, stage and studio, commercial and emergency-vehicle lighting. FEATURES Light output and efficacy similar to XLamp XP-G Maximum drive current: 1000 ma Low thermal resistance: 6 C/W Maximum junction temperature: 150 C Wide viewing angle: 120 Reflow solderable - JEDEC J- STD-020C compatible Electrically neutral thermal path TABLE OF CONTENTS Flux Characteristics (T J = 25 C) - White... 2 Characteristics... 3 Relative Spectral Power Distribution... 3 Relative Flux vs. Junction Temperature (I F = 350 ma)... 4 Electrical Characteristics (T J = 25 C)... 5 Thermal Design... 5 Relative Flux vs. Current (T J = 25 C)... 6 Typical Spatial Distribution... 6 Reflow Soldering Characteristics.. 7 Notes... 8 Mechanical Dimensions (T A = 25 C)... 9 Tape and Reel Packaging WWW. CREE.COM/XLAMP Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc Silicon Drive Durham, NC USA Tel:

2 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS FLUX CHARACTERISTICS (T J = 25 C) - WHITE The following table provides several base order codes for XLamp XP-E HEW LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family Binning and Labeling document. Color CCT Range Base Order Codes Min Luminous 350 ma (lm) Order Code Min. Max. Cool White 5,000 K 8,300 K Outdoor White 2,600 K 5,300 K Neutral White 3,700 K 5,000 K 80-CRI White 2,600 K 4,300 K Warm White 2,600 K 3,700 K 85-CRI White 2,600 K 3,200 K R3 122 XPEHEW-L F51 R4 130 XPEHEW-L G51 R2 114 XPEHEW EC2 R3 122 XPEHEW FC2 Q5 107 XPEHEW-L DE4 R2 114 XPEHEW-L EE4 Q XPEHEW-H BE7 Q4 100 XPEHEW-H CE7 Q XPEHEW-L BE7 Q4 100 XPEHEW-L CE7 P XPEHEW-P E7 Q XPEHEW-P AE7 90-CRI White 2,600 K 3,200 K P XPEHEW-U E7 Notes: Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements. Typical CRI for Cool White and Neutral White (3,700 K - 10,000 K CCT) is 75. Typical CRI for Outdoor White (4,000 K - 5,300 K CCT) is 70. Typical CRI for Warm White (2,600 K - 3,700 K CCT) is 80. Minimum CRI for 80-CRI White is 80. Minimum CRI for 85-CRI White is 85. Minimum CRI for 90-CRI White is 90. Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 2

3 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal Resistance, junction to solder point - white C/W 6 Viewing Angle (FWHM) - white degrees 120 Temperature coefficient of voltage - white mv/ C -3 ESD Classification (HBM per Mil-Std-883D) Class 2 DC Forward Current - white ma 1000 Reverse Voltage V 5 Forward Voltage (@ 350 ma) - white V Forward voltage (@ 700 ma) - white V 3.15 Forward Voltage (@ 1000 ma) - white V 3.25 LED Junction Temperature C 150 RELATIVE SPECTRAL POWER DISTRIBUTION elative 100 Spectral Power Relative Radiant Power (%) Cool White Neutral White Warm & 80 CRI White Wavelength (nm) Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 3

4 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS RELATIVE SPECTRAL POWER DISTRIBUTION (CONTINUED) 100 Relative Radiant Power (%) Outdoor White 85 & 90 CRI White Wavelength (nm) RELATIVE FLUX VS. JUNCTION TEMPERATURE (I F = 350 MA) 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% Junction Temperature (ºC) Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 4

5 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS ELECTRICAL CHARACTERISTICS (T J = 25 C) Forward Current (ma) Forward Voltage (V) THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics Maximum Current (ma) Rj-a = 10 C/W Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W Ambient Temperature (ºC) Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 5

6 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS RELATIVE FLUX VS. CURRENT (T J = 25 C) 250% Relative Luminous Flux (%) 200% 150% 100% ypical 50% Spatial Radiation Pattern 0% Forward Current (ma) TYPICAL SPATIAL DISTRIBUTION 120 Relative Luminous Intensity (%) Angle (º) Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 6

7 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XP-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder Average Ramp-Up Rate (Ts max to Tp) 3 C/second max. 3 C/second max. Preheat: Temperature Min (Ts min ) 100 C 150 C Preheat: Temperature Max (Ts max ) 150 C 200 C Preheat: Time (ts min to ts max ) seconds seconds Time Maintained Above: Temperature (T L ) 183 C 217 C Time Maintained Above: Time (t L ) seconds seconds Peak/Classification Temperature (Tp) 215 C 260 C Time Within 5 C of Actual Peak Temperature (tp) seconds seconds Ramp-Down Rate 6 C/second max. 6 C/second max Time 25 C to Peak Temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 7

8 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS Notes Lumen Maintenance Projections Cree currently recommends a maximum drive current of 700 ma for XLamp XP-E High Efficiency White in designs seeking the ENERGY STAR* 35,000 hour lifetime rating ( 94.1% luminous 6000 hours) or 1000 ma driver current in designs seeking the ENERGY STAR* 25,000 hour lifetime rating ( 91.8% luminous 6000 hours). Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. * These lifetime ratings are based on the current ENERGY STAR Solid State Lighting Luminaires V1.1 (December 12, 2008) and ENERGY STAR Integral LED Lamps V1.0 (December 3, 2009) lumen maintenance criteria. Moisture Sensitivity In testing, Cree has found XLamp XP-E LEDs to have unlimited floor life in conditions 30ºC / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, Vision Advisory Claim WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at com/products/pdf/xlamp_eyesafety.pdf. Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 8

9 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS MECHANICAL DIMENSIONS (T A = 25 C) All measurements are ±.13 mm unless otherwise indicated RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 9

10 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS TAPE AND REEL All dimensions in mm. END 1.5±.1 User Feed Direction 4±.1 8± ±.1 CATHODE SIDE START ± ANODE SIDE Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1000 Lamps) Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Carrier Tape Pocket Tape 13mm 7" Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 10

11 XLAMP XP-E HIGH-EFFICIENCY WHITE LEDS PACKAGING All dimensions in mm. Vacuum-Sealed Moisture Vacuum-Sealed Barrier Bag Moisture Barrier Bag CREE Label Bin with CodeCree Bin & Code, Barcode Qty, Label Lot # Label with with Customer Cree Bin Code, P/N, Qty, Qty, Lot #, Lot PO ## Patent Label Label with Customer Order Code, Qty, Reel ID, PO# Label with Cree Bin Code, Qty, Lot # Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 11

12 Cree XLamp XP Family LEDs BINNING & LABELING CLD-AP22 REV 13 TABLE OF CONTENTS WWW. CREE.COM/XLAMP Introduction...2 Bin and Order-Code Format...2 Performance s Brightness...3 Performance s Chromaticity...4 Performance s Dominant Wavelength...8 Performance s Forward Voltage...8 Cree s Standard Chromaticity Regions Plotted on the 1931 CIE Curve...9 Standard Order Codes and Bins (XP-C Cool White) Standard Order Codes and Bins (XP-C ANSI Cool White) Standard Order Codes and Bins (XP-C Neutral White) Standard Order Codes and Bins (XP-C Warm White) Standard Order Codes and Bins (XP-C Color) Standard Order Codes and Bins (XP-E Cool White) Standard Order Codes and Bins (XP-E ANSI Cool White) Standard Order Codes and Bins (XP-E Outdoor White) Standard Order Codes and Bins (XP-E Neutral White) Standard Order Codes and Bins (XP-E 80-CRI minimum, White) Standard Order Codes and Bins (XP-E Warm White) Standard Order Codes and Bins (XP-E 85-CRI minimum, White) Standard Order Codes and Bins (XP-E 90-CRI minimum, White) Standard Order Codes and Bins (XP-E Color) Standard Order Codes and Bins (XP-E HEW ANSI Cool White) Standard Order Codes and Bins (XP-E HEW Outdoor White) Standard Order Codes and Bins (XP-E HEW Neutral White) Standard Order Codes and Bins (XP-E HEW 80-CRI minimum, White) Standard Order Codes and Bins (XP-E HEW Warm White) Standard Order Codes and Bins (XP-E HEW 85-CRI minimum, White) Standard Order Codes and Bins (XP-E HEW 90-CRI minimum, White) Standard Order Codes and Bins (XP-G ANSI Cool White) Standard Order Codes and Bins (XP-G Outdoor White) Standard Order Codes and Bins (XP-G Neutral White) Standard Order Codes and Bins (XP-G 80-CRI minimum, White) Standard Order Codes and Bins (XP-G Warm White) Standard Order Codes and Bins (XP-G 85-CRI minimum, White) Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available Cree, Inc Silicon Drive Durham, NC USA Tel:

13 INTRODUCTION This document describes the product nomenclature required to select and order Cree s XLamp XP Family LEDs. XLamp XP Family LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. All XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). Color XLamp LEDs are sorted by dominant wavelength (color) and luminous or radiant flux (brightness). Amber, red-orange and red LEDs are additionally binned into forward voltage bins. LEDs are shipped on reels containing LEDs from one bin and are always labeled with the appropriate bin code. Kits contain LEDs from a number of similar bins and are fully defined by their order codes. A full explanation of the order codes for XLamp XP Family LEDs, as well as a list of standard order codes, is provided in this document. BIN AND ORDER-CODE FORMAT Bin codes and order codes are configured in the following manner: Order Code Bin Code Series XPE = XP-E XPC = XP-C XPG = XP-G Color specification L1 = White 01 = Outdoor White H1 = 80 CRI P1 = 85 CRI U1 = 90 CRI Kit number SSSCCC-BD-HHHH-NNNNN Internal code Color WHT = White HEW = High-Efficiency White ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RDO = Red-Orange RED = Red Series XPE = XP-E XPC = XP-C XPG = XP-G Color specification L1 = White 01 = Outdoor White H1 = 80 CRI P1 = 85 CRI U1 = 90 CRI Luminous or radiant flux group Internal code SSSCCC-BD-WWW-FF-G-AA Forward voltage group (amber, red-orange, red, high-efficiency white) Chromaticity or dominant-wavelength group Color WHT = White HEW = High-Efficiency White ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RDO = Red-Orange RED = Red 2

14 PERFORMANCE GROUPS BRIGHTNESS XLamp XP Family LEDs (except Royal Blue) are tested for luminous flux and placed into one of the following luminousflux groups: Code Min. Luminous 350 ma (lm) Max. Luminous 350 ma (lm) J K K M M N N N P P P Q Q Q Q R R R R S S Royal-blue XLamp LEDs are tested for radiant flux and sorted into one of the following radiant-flux bins: Min. Radiant Flux 350 ma Max. Radiant Flux 350 ma

15 PERFORMANCE GROUPS CHROMATICITY White XLamp LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. Region x y Region x y WK WF WA WP WM WD WB WG WE WJ WN WH WC

16 PERFORMANCE GROUPS CHROMATICITY (CONTINUED) Region x y Region x y Region x y Region x y A B 0C 0D R S 0T 0U A B 1C 1D R S 1T 1U A B 2C 2D R S 2T 2U A B 3C 3D R S 3T 3U A B 4C 4D R S 4T 4U

17 PERFORMANCE GROUPS CHROMATICITY (CONTINUED) Region x y Region x y Region x y Region x y A A2 5A3 5A B B2 5B3 5B C C2 5C3 5C D D2 5D3 5D R S A A2 6A3 6A B B2 6B3 6B C C2 6C3 6C D D2 6D3 6D

18 12 PERFORMANCE GROUPS CHROMATICITY (CONTINUED) Region x y Region x y Region x y Region x y A A2 7A3 7A B B2 7B3 7B C C2 7C3 7C D D2 7D3 7D A A2 8A3 8A B B2 8B3 8B C C2 8C3 8C D D2 8D3 8D Copyright Cree, Cree, Inc. All Inc. rights All rights reserved. reserved. The information The information this in document this document is subject is subject to change to change without without notice. notice. Cree, Cree, the Cree the logo Cree and logo XLamp and XLamp are registered are registered trademarks trademarks of Cree, of Inc. Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available 7

19 PERFORMANCE GROUPS DOMINANT WAVELENGTH Color XLamp LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color DWL Min. DWL 350 ma Max. DWL 350 ma D Royal Blue D D B Blue B B B G Green G G Amber Red-Orange Red A A O O R R PERFORMANCE GROUPS FORWARD VOLTAGE Amber, red-orange and red XLamp LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward Voltage Min. Forward 350 ma Max. Forward 350 ma B C D E F G H J

20 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE Cool White ANSI Cool White K K K 2S 2T 3S 3B CCy K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3A 3R S 0B 0A 0C 0D 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx

21 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) Outdoor White K K 5T CCy S 3B 3A 5000K 3T 3C 3D 3U 4R 4A 4B 4S 4U 4D 4C 4T 5A1 5R 5A2 5B1 5B2 5A4 5A3 5B4 5S 5B3 5D1 5U 5D2 5C1 5C2 5D4 ANSI C78.377A 5D3 5C4 5C R CCx

22 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) ANSI Neutral White and ANSI warm white K 2700K CCy B 5000K 3C 4A 4B 4D 4500K 4C 5A1 5A2 5B1 5B2 5A4 5A3 5B4 5B3 5D1 5D2 5C1 4000K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6D1 6B3 6D2 6C1 6D4 3500K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C3 8B1 8A3 8D1 8B2 8B4 8D2 8D4 8B3 8C1 8D3 8C2 8C4 ANSI C78.377A 8C A 3D CCx Note: Effective July 31, 2009, Cree began sorting XLamp XP Family White LEDs with the new chromaticity structure for the CCT range 2700 K to 4300 K, as shown above, in order to provide more-detailed chromaticity information. There are no changes to XLamp XP Family White order codes. Customers with order codes containing any of the chromaticity bins 5A, 5B, 5C, 5D, 6A, 6B, 6C, 6D, 7A, 7B, 7C, 7D, 8A, 8B, 8C, 8D will automatically begin receiving the new chromaticity bins. Please note that there is no change to existing inventory at Cree or at Cree s distributors, so customers may not see the new chromaticity bins for a period of time. 11

23 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XP LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. STANDARD ORDER CODES AND BINS (XP-C COOL WHITE) XLamp XP-C LED Standard Order Codes - White Min. 350 ma* P Q Q Q4 100 Chromaticity Regions Cool White (5000 K 10,000 K) WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP Order Code XPCWHT-L XPCWHT-L XPCWHT-L XPCWHT-L A01 XPCWHT-L A02 XPCWHT-L A03 XPCWHT-L B01 XPCWHT-L B02 XPCWHT-L B03 XPCWHT-L C01 XPCWHT-L C02 XPCWHT-L C03 STANDARD ORDER CODES AND BINS (XP-C ANSI COOL WHITE) XLamp XP-C LED Standard Order Codes - White Min. Luminous Flux 350 ma* Chromaticity Regions Order Code ANSI Cool White (5000 K 8300 K) 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPCWHT-L P A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPCWHT-L A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPCWHT-L A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPCWHT-L A51 Q A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPCWHT-L A53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPCWHT-L A50 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPCWHT-L B51 Q A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPCWHT-L B53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPCWHT-L B50 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPCWHT-L C51 Q A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPCWHT-L C53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPCWHT-L C50 * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 12

24 STANDARD ORDER CODES AND BINS (XP-C NEUTRAL WHITE) XLamp XP-C LED Standard Order Codes - White Min 350 ma* Chromaticity Regions Order Code CCT Neutral White (3700 K 5000 K) 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPCWHT-L F K P A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPCWHT-L E K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPCWHT-L F K 3A, 3B, 3C, 3D XPCWHT-L E K 3C, 3D, 4A, 4B XPCWHT-L F K P A, 4B, 4C, 4D XPCWHT-L E K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPCWHT-L F K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, XPCWHT-L E K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPCWHT-L F K 3A, 3B, 3C, 3D XPCWHT-L E K 3C, 3D, 4A, 4B XPCWHT-L F K P A, 4B, 4C, 4D XPCWHT-L E K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPCWHT-L F K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPCWHT-L E K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPCWHT-L F K 3A, 3B, 3C, 3D XPCWHT-L AE K Q C, 3D, 4A, 4B XPCWHT-L AF K 4A, 4B, 4C, 4D XPCWHT-L AE K 13

25 STANDARD ORDER CODES AND BINS (XP-C WARM WHITE) XLamp XP-C LED Standard Order Codes - White Min 350 ma* Chromaticity Regions Order Code CCT Warm White (2600 K 3700 K) N C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPCWHT-L F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPCWHT-L E K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPCWHT-L F K N A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPCWHT-L E K 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPCWHT-L F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPCWHT-L E K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPCWHT-L E K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPCWHT-L F K P A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPCWHT-L E K 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPCWHT-L F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPCWHT-L E K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPCWHT-L E K P C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPCWHT-L F K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPCWHT-L E K P A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPCWHT-L E K 14

26 STANDARD ORDER CODES AND BINS (XP-C COLOR) XLamp XP-C LED Standard Order Codes - Royal Blue Color Min. Radiant Flux 350 ma* Calculated Min. Radiant Flux 125 ma* Dominant Wavelength (nm) Min. Max. Order Code Flux (mw) Flux (mw) DWL (nm) DWL (nm) D3 450 D5 465 XPCROY-L D3 450 D4 460 XPCROY-L Royal Blue D4 455 D5 465 XPCROY-L D3 450 D5 465 XPCROY-L D3 450 D4 460 XPCROY-L D4 455 D5 465 XPCROY-L D3 450 D5 465 XPCROY-L D3 450 D4 460 XPCROY-L XLamp XP-C LED Standard Order Codes - Color Color Min. 350 ma* Calculated Min. 125 ma* Dominant Wavelength (nm) Min. Max. Order Code DWL (nm) DWL (nm) B3 465 B6 485 XPCBLU-L V01 H B3 465 B5 480 XPCBLU-L V02 Blue B4 470 B5 480 XPCBLU-L V05 B3 465 B6 485 XPCBLU-L W01 J B3 465 B5 480 XPCBLU-L W02 B4 470 B5 480 XPCBLU-L W05 G2 520 G4 535 XPCGRN-L N G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L N G2 520 G3 530 XPCGRN-L Green G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L P G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L P G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L K A2 585 A3 595 XPCAMB-L Z01 Amber M A2 585 A3 595 XPCAMB-L M A2 585 A3 595 XPCAMB-L N A2 585 A3 595 XPCAMB-L

27 STANDARD ORDER CODES AND BINS (XP-C COLOR CONTINUED) XLamp XP-C LED Standard Order Codes - Color Color Min. 350 ma* Calculated Min. 125 ma* Dominant Wavelength (nm) Min. Max. Order Code M O3 610 O4 620 XPCRDO-L Red-Orange N O3 610 O4 620 XPCRDO-L N O3 610 O4 620 XPCRDO-L N O3 610 O4 620 XPCRDO-L K R2 620 R3 630 XPCRED-L Z01 Red M R2 620 R3 630 XPCRED-L M R2 620 R3 630 XPCRED-L N R2 620 R3 630 XPCRED-L * Calculated values for reference only * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 16

28 STANDARD ORDER CODES AND BINS (XP-E COOL WHITE) XLamp XP-E LED Standard Order Codes - White Min. 350 ma* Q4 100 Q5 107 R2 114 R3 122 Chromaticity Regions Cool White (5000 K 10,000 K) WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP Order Code XPEWHT-L C01 XPEWHT-L C02 XPEWHT-L C03 XPEWHT-L D01 XPEWHT-L D02 XPEWHT-L D03 XPEWHT-L E01 XPEWHT-L E02 XPEWHT-L E03 XPEWHT-L F01 XPEWHT-L F02 XPEWHT-L F03 17

29 STANDARD ORDER CODES AND BINS (XP-E ANSI COOL WHITE) XLamp XP-E LED Standard Order Codes - White Min. Luminous Flux 350 ma* Chromaticity Regions Order Code ANSI Cool White (5000 K 8300 K) 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPEWHT-L C51 Q A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPEWHT-L C53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPEWHT-L C50 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPEWHT-L D51 Q A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPEWHT-L D53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPEWHT-L D50 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPEWHT-L E51 R A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPEWHT-L E53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPEWHT-L E50 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S XPEWHT-L F51 R A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S XPEWHT-L F53 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D XPEWHT-L F50 * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 18

30 STANDARD ORDER CODES AND BINS (XP-E OUTDOOR WHITE) XLamp XP-E LED Standard Order Codes - White Min. 350 ma* Chromaticity Regions Order Code CCT Outdoor White (4000 K 5300 K) 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S XPEWHT CC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT CD K Q C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT CC K 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT CD K 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT CC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S XPEWHT DC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT DD K Q C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT DC K 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT DD K 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT DC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S XPEWHT EC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT ED K R C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT EC K 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT ED K 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT EC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S XPEWHT FC K 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT FD K R C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U XPEWHT FC K 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT FD K 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S XPEWHT FC K * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 19

31 STANDARD ORDER CODES AND BINS (XP-E NEUTRAL WHITE) XLamp XP-E LED Standard Order Codes - White Minimum 350 ma* Chromaticity Regions Order Code CCT Neutral White (3700 K K) P C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPEWHT-L F K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPEWHT-L AF K Q A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEWHT-L AE K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPEWHT-L AF K 3A, 3B, 3C, 3D XPEWHT-L BE K 3C, 3D, 4A, 4B XPEWHT-L BF K Q A, 4B, 4C, 4D XPEWHT-L BE K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPEWHT-L BF K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEWHT-L BE K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPEWHT-L BF K 3A, 3B, 3C, 3D XPEWHT-L CE K 3C, 3D, 4A, 4B XPEWHT-L CF K Q A, 4B, 4C, 4D XPEWHT-L CE K 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 XPEWHT-L CF K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEWHT-L CE K 3A, 3B, 3C, 3D XPEWHT-L DE K Q C, 3D, 4A, 4B XPEWHT-L DF K 4A, 4B, 4C, 4D XPEWHT-L DE K * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 20

32 STANDARD ORDER CODES AND BINS (XP-E 80-CRI MINIMUM, WHITE) XLamp XP-E LED Standard Order Codes - 80-CRI White Minimum 350 ma* Chromaticity Regions Order Code CCT 80-CRI White (2600 K K) P C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-H F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-H E K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPEWHT-H F K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPEWHT-H E K P C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPEWHT-H F K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-H E K 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-H F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-H E K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEWHT-H AE K 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPEWHT-H AF K Q A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPEWHT-H AE K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPEWHT-H AF K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-H AE K 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEWHT-H BE K Q C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 XPEWHT-H BF K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPEWHT-H BE K Q A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 XPEWHT-H CE K 21

33 STANDARD ORDER CODES AND BINS (XP-E WARM WHITE) XLamp XP-E LED Standard Order Codes - White Minimum Luminous Flux 350 ma* Chromaticity Regions Order Code CCT Warm White (2600 K K) P A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-L E8 2700K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-L E7 3000K P C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-L F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-L E K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPEWHT-L E K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPEWHT-L F K P A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-L E K 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-L F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-L E K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPEWHT-L AE K 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPEWHT-L AF K Q A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-L AE K 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-L AF K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-L AE K 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 XPEWHT-L BE K Q C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 XPEWHT-L BF K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-L BE K * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 22

34 STANDARD ORDER CODES AND BINS (XP-E 85-CRI MINIMUM, WHITE) XLamp XP-E LED Standard Order Codes - 85-CRI White Minimum 350 ma* Chromaticity Regions Order Code CCT 85-CRI White (2600 K K) N4 62 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-P F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-P E K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-P E K P C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-P F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-P E K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-P E K P C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-P F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-P E K P A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-P E K STANDARD ORDER CODES AND BINS (XP-E 90-CRI MINIMUM, WHITE) XLamp XP-E LED Standard Order Codes - 90-CRI White Minimum 350 ma* Chromaticity Regions Order Code CCT 90-CRI White (2600 K K) N4 62 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-U F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-U E K 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-U E K P C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 XPEWHT-U F K 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 XPEWHT-U E K P A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 XPEWHT-U E K * Cree XLamp XP Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. 23

35 STANDARD ORDER CODES AND BINS (XP-E COLOR) XLamp XP-E LED Standard Order Codes - Royal Blue Color Min. Radiant Flux 350 ma* Min. Dominant Wavelength (nm) Max. Order Code Flux (mw) DWL (nm) DWL (nm) D3 450 D5 465 XPEROY-L D3 450 D4 460 XPEROY-L Royal Blue D4 455 D5 465 XPEROY-L D3 450 D5 465 XPEROY-L A01 D3 450 D4 460 XPEROY-L A02 D4 455 D5 465 XPEROY-L A03 D3 450 D5 465 XPEROY-L B01 D3 450 D4 460 XPEROY-L B02 XLamp XP-E LED Standard Order Codes - Color Color Min. 350 ma* Min. Dominant Wavelength (nm) Max. Order Code DWL (nm) DWL (nm) B3 465 B6 485 XPEBLU-L Y01 K B3 465 B5 480 XPEBLU-L Y02 Blue Green K M P Q Q Q4 100 Q5 107 B4 470 B5 480 XPEBLU-L Y05 B3 465 B6 485 XPEBLU-L Z01 B3 465 B5 480 XPEBLU-L Z02 B4 470 B5 480 XPEBLU-L Z05 B3 465 B6 485 XPEBLU-L B3 465 B5 480 XPEBLU-L B4 470 B5 480 XPEBLU-L G2 520 G4 535 XPEGRN-L G2 520 G3 530 XPEGRN-L G3 525 G4 535 XPEGRN-L G2 520 G4 535 XPEGRN-L A01 G2 520 G3 530 XPEGRN-L A02 G3 525 G4 535 XPEGRN-L A03 G2 520 G4 535 XPEGRN-L B01 G2 520 G3 530 XPEGRN-L B02 G3 525 G4 535 XPEGRN-L B03 G2 520 G4 535 XPEGRN-L C01 G2 520 G3 530 XPEGRN-L C02 G3 525 G4 535 XPEGRN-L C03 G2 520 G4 535 XPEGRN-L D01 G2 520 G3 530 XPEGRN-L D02 G3 525 G4 535 XPEGRN-L D03 24