Safety frames. All safety frames are certified according to DIN EN Glazeable clip available for some frames. Large range of side protection

Transcription

1

2 QUALITY MADE Safety frames All safety frames are certified according to DIN EN 1 18 Glazeable clip available for some frames Large range of side protection

3 GENERAL INFORMATION ON SAFETY GLASSES AND CLIP-ONS 1. CE-Certification All safety glasses and clip-on lens attachments are tested to EN 1 18 and carry a CE certificate. The test specifications are available from the following address: Beuth Verlag GmbH Burggrafenstraße D Berlin Tel.: 030/ Fax: 030/ info@beuth.de homepage: Frame with plano lenses Produced according to directive 89/8/EWG and EN 1 18 for personal protective equipment. 2. Cleaning Lenses should be cleaned under running water with a soft cleaning agent and then dried with a soft cloth. They may afterwards be cleaned with a commercially available disinfectant. Important! Do not use any chemicals, spirits or cleaning fluids which contain solvents. 3. Areas of application All safety glasses conform to optical class 1 and are therefore suitable for continuous use. All frames with temples are certified for basic usage. 4. Protective welding filters/protection level Protective welding filters should be used for welding only. By selecting the correct level of protection, the filter will protect against harmful radiation in the visible, ultraviolet and infra-red range. Care must be taken to avoid being dazzled by the welding arc. Looking into the welding arc without protection may cause inflammation of the cornea or irreversible clouding of the eye lens (cataract). The level of protection suitable for the welding process should be determined from the following table. The maximum permis sible variation is one level upward or downward. Filter Application Against radiation leakage Flame cleaning Welding/Brazing Flame cutting Welding/Brazing Flame cutting Welding/Brazing Flame cutting Flame cutting Gas l/min Acetylene Oxygen Acetylene Oxygen Acetylene Oxygen Oxygen < 70 < > > > 800 > 4,000 > 8, UV absorption All safety glasses and clip-on lens attachments with polycarbonate lenses have a UV absorption rate of 99.5 % up to 370 nm. 180

4 Single shield goggles, clear Stylish convex design Lenses with hard coating Lens: polycarbonate, transparent 43 mm 1 mm 125 mm 22 g 135 mm 42 mm 1 mm 120 mm 23 g mm 42 mm 14 mm 125 mm 31 g mm 42 mm 15 mm 125 mm 30 g Transparent Stylish convex design Lenses with hard coating Lens: polycarbonate, transparent or grey Grey (75% tint) NEW Blue white, small Transparent Stylish convex design Ventilation space between lens and rim enables air circulation and avoids steamed up lenses Soft padded upper frame rim gives more comfort during wear Lens: polycarbonate, transparent Black transparent 181

5 Universal Stylish curved design with aspheric lenses Lenses with hard coating Temples adjustable in length and inclination Lens: polycarbonate, transparent 44 mm 1 mm mm 27 g 135 mm 45 mm 18 mm 35 g 53 mm 12 mm mm 30 g Black Attractive safety goggle with temples and head strap Tight fitting Soft padded frame rim with good ventilation Clear view even through outer parts of the lens With anti-fog and hard coating Lens: polycarbonate, transparent or grey Black grey Lens: grey (80 % tint) Black grey Lens: transparent Stylish convex design Comfortable strap bridge, individually adjustable Lenses with hard coating Temples adjustable in length and inclination Lens: polycarbonate, grey tinting (75 % tint) or transparent Blue transparent Black grey (75 % tint) 10 mm

6 Universal XC XC stands for X-tra comfort, X-tra coverage, X-tra control Perfect fit through easily adjustable temple and comfort bridge Lenses with hard and anti-fog coating Replacement lenses Temples adjustable in length and inclination Lens: polycarbonate, transparent 57 mm 12 mm mm 3 g These safety goggles are also available as welding safety goggles (see no on page 189) Blue Spare lens transparent Metal clip, glazeable from up to 4.00 dpt. with cyl dpt Suitable for Universal XC no and Easy fitting with a secure fixation Flexible metal frame Including cloth bag 4 mm! 33 mm 20 mm 5.5 g This clip in is glazeable with all kinds of lens materials and from any optician, because the certified safety goggle remains unchanged. Universal Integrated, transparent top and side protection Combinable with clip-ons for protection against other types of exposure Temples with metal insert, adjustable Opening on temple ends for a spectacle band Lenses with hard coating Appropriate clip-ons for protection against the following types of exposure are available upon request: welding, glass blowing, extreme heat from foundries and blast furnaces. 54 mm 44 mm 1 mm 34 g Polyamide Blue-transparent 183

7 Universal Integrated, transparent top and side protection Lenses with hard coating Temples adjustable in length and inclination 59 mm 44 mm 15 mm mm 35 g 54 mm 45 mm 18 mm 145 mm 45 g Blue-transparent High quality mens frame Side protection made of polycarbonate Lenses with hard coating Silver matt 184

8 Universal Stylish convex design with wide temple Transparent matt 15 mm 125 mm 30 g 57 mm 39 mm 13 mm 145 mm 38 g 57 mm 39 mm 13 mm 145 mm 39 g Gun matt Modern shape with double bridge and side protection Silver 39 mm Grey matt Modern shape with side protection Black matt 0 mm Gun 185

9 Universal Mens frame with double bridge Side protection made of polycarbonate mm mm 17 mm 3 g 01 5 mm 41 mm 17 mm 3 g mm 45 mm 17 mm 3 g Mens frame Side protection made of polycarbonate mm mm 18 mm 35 g 5 mm 38 mm 18 mm 35 g Unisex frame Side protection made of polycarbonate mm mm 17 mm 3 g 42 mm 18 mm 3 g Gun Gun Gun Gun Gun Gun Gun 18 5 mm

10

11 Visitor goggle Suitable to wear over corrective spectacles Integrated top and side protection, covers the entire eye area Punched earpiece for fastening spectacle strap Lenses with hard coating Lens: polycarbonate, transparent 159 mm 54 mm 1 mm 125 mm 40 g Transparent Laboratory goggle Suitable to wear over corrective spectacles Resistant against penetration of hot particulate materials, coarse dust or drops and splashes Soft frame for a perfect, individual fit With ventilation slits Flexible, extra width adjustable head band Lenses with hard and anti-fog coating Lens: Transparent 10 mm 75 mm 20 mm 13 g Grey Metal clip, glazeable from up to 4.00 dpt. with cyl dpt. Suitable for no Easy fitting with a secure fixation 49 mm 33 mm 22 mm 13 g ! 188 This clip in is glazeable with all kinds of lens materials and from any optician, because the certified safety goggle remains unchanged.

12 Welding goggles Universal XC XC stands for X-tra comfort, X-tra coverage, X-tra control Perfect fit through easily adjustable temples and comfortable bridge Lenses with hard coating Replacement lenses Temples adjustable in length and inclination Lens: polycarbonate, green tinting (98 % absorption) 150 mm 57 mm 12 mm mm 3 g Protection level 5 You will find the suitable glazing insert no on page Blue/green Easy fitting for prescription lenses with thread rings Made of hypoallergenic polyethylene Indirect ventilation slits Elastic, adjustable head band Lenses with hard coating Lenses: Glare Shield: Athermal-Welding protection lenses (98 % absorption) In threaded rings: polycarbonate, transparent 4 mm 4 mm 1 mm 145 g Protection level 5 Spare lenses Glare shield Gold/green Athermal, green Safety clip-on To clip onto the prescription frames Flip up Lenses with hard coating 2 mm 54 mm 14 mm 20 g For welding Protection level Lenses: polycarbonate, green tinting (98 % absorption) 189

13 Side protection Universal Protection against optical radiation and mechanical influences Grey transparent Polycarbonate For almost all temples on metal or plastic frames Fixation by means of a rubber mounting band Temple support: 12 mm Eye rim support: 7 mm 1 pair Transparent Polycarbonate For almost all temples on metal or plastic frames Fixation by means of a rubber mounting band Temple support: 8 mm Eye rim support: 5 mm 1 pair For thin temples Grey transparent Transparent Medical polymer, flexible adjustment For almost all temples of metal and plastic frames Temple support: 9 mm Eye rim support: 7 mm 1 pair Flexible Grey Transparent

14 Protection against optical radiation Leather with adjustable metal rim To be fixed inside the eye rim Temple loop: 8 mm 1 pair Black Leather with adjustable metal rim for round frame shapes To clip onto the eye rim Temple loop: 1 mm Eye rim support: 2.5 mm 1 pair Black Soft synthetic leather with flexible metal insert Adjustable to almost every frame shape Temple support: 10 mm Temple support at the front: 1 mm 1 pair Brown 191

15 Side protection Universal Protection against slight mechanical influences Flexible plastic with adjustable metal rim To be fixed inside the eye rim Temple loop: mm 1 pair Transparent Semi flexible plastic (CA) Temple support: 4 mm 1 pair For thin temples Brown Transparent Nose protection Protection against optical radiation and slight mechanical influences Soft Kevlar With long loop and Velcro fastener suitable for every frame Individual fitting by adjustable metal clamp Black Beige

16 ? Explanation of signs Shield length Lens dimensions Curve Lens length Bridge width Weight Lens height Temple length Packing unit Frame dimensions 193