Tecohoo V-720 camera of video meeting. Customer instruction V2.0 (EN)

Transcription

1 Tecohoo V-720 camera of video meeting Customer instruction V2.0 (EN)

2 ITEM 1 Safe information Main functions and features parts of video conference camera interface function of video conference camera VISCA RS-232C IN interface identifier VISCA RS-232C OUT: interface identifier power interface : please use video conference dedicated power supply IR: infrared receiving tube VISCA RS-422: interface identifier USB:USB plug and play video connect port The PTZ connection method of video conference camera The connection method of control pan-tilt through PC to VISCA RS-232C port of camera: Cascade method of video conferencing cameras Video conferencing camera PTZ functions Video conference camera dial-up setting dial-up address setting table dial-up cable of infrared receive address communication protocol set the dial-up cable communication mode setting dial-up cable remote control qualification

3 1 Safe information Before install and use camera,please read the instruction carefully In order to keep camera operate well, please try to keep camera steady during transport store and install Please follow nation and locate safe standard, use the power transformer RS-485 together with the camera you buy; please keep the camera distance when heavy-current device is nearby. Please don t use camera when the conditions is over limit, such as those factor: temperature humidity and forms of power transformer (please read specification data in indicator of video meeting camera). Please don t dismantle the component inside camera. Please don t use strong chemism or corrosive detergents scrub camera. Please use dry rag or neutral detergent scrub camera. Please use the lens paper to scrub camera lens. In order to keep the sensitization device operate well, please don t use camera sight hard light object. 2 Main functions and features Camera of video conference integrated those functions and features below: High definition multicolor movement: CMOS 130 million effective pixels.720p (1280*720)/30frames Full-focal wide-angle lens: full-focus function,to the near object and far object it will automatic divided into focus, the views of far and near object are all limpid; special wide-angle lens design specific to videos conference, extend gather video scope, especial suit for meeting room Omni-capacity pan-tilt and multi protocols and codes: Support most of 2

4 the control protocol, with high sensitivity remote This product uses the integrated design, sophisticated, compact structure, high strength, ease of fast handling, good heat dissipation; drive section uses precision stepper motors, smooth operation, accurate positioning 2.1 parts of video conference camera 1). Camera of video conference 2). DC12V-1.2A power supply 3). Installing support 4). Install screw 5). Publicity colored page of product 6). Remote control 7). RS232 serial port control line 8). USB connecting line 2.2 interface function of video conference camera As the picture below put: 3

5 VISCA RS-232C IN interface identifier Seria l numbe function r 1 DTR IN 2 DSR IN 3 TXD IN 4 GND 5 RXD IN 6 GND 7 NO Connection 8 NO Connection VISCA RS-232C OUT: interface identifier Serial number function 1 DTR OUT 2 DSR OUT 3 TXD OUT 4 GND 5 RXD OUT 6 GND 7 NO Connection 8 NO Connection 4

6 power interface:please use video conference dedicated power supply IR: infrared receiving tube VISCA RS-422: interface identifier Serial number function 1 TXD IN+ 2 TXD IN- 3 RXD IN-(485B) 4 RXD IN+(485A) 5 GND USB:USB plug and play video connect port 2.3 The PTZ connection method of video conference camera The connection method of control pan-tilt through PC to VISCA RS-232C port of camera: Nine-pin connect port: 5

7 25 pin connect port: Cascade method of video conferencing cameras Through cascade method of video conferencing cameras,you can connect many camera together,also you can separate control Cascade method: 6

8 2.4 Video conferencing camera PTZ functions Level of 360 continuous rotation and 0-90 vertical rotation. Rotational speed be adjusted by remote control according to their needs, more humane Can be set and call presets. Positioning accuracy up to , the intelligent video conferencing camera support 10 preset point Camera will be automatic activate function after electrify After reboot automatically restore the action before power off Built-in multi-protocol decode,set baud rate and camera address of the Conference through switch,control signal through dip switch to choose RS-485 or RS-232C for transmission Video output:usb no need drive,plug and play; 7

9 3 Video conference camera dial-up setting 3.1 dial-up address setting table SW1 dial-up switch statue(1-8 bit) addre ss note: Broadcast address:if address is 255 that keyboard setting,then you can control any video conference camera address Test address:if the video conference camera address setting is 0,then any address can control the camera that you are using 3.2 dial-up cable of infrared receive address IR switch choose SW2(1-2 bit)status of dial switch

10 0 OFF OFF 1 ON OFF 2 OFF ON 3 ON ON Note:if the dial-up of infrared receive address is 0,any address of infrared remote control can control is camera 3.3 communication protocol set the dial-up cable protocol SW2(3-4bit)status of dial-up -3-4 PELCO_P OFF OFF PELCO_D OFF ON VISCA(default) ON ON 3.4 communication mode setting dial-up cable SW2(5-6bit)status of dial-up switch -5 BAND RATE -6 SWITCH OFF 4800bps OFF RS-422 ON 9600bps ON RS-232C 9

11 4 remote control Instruction of remote control panel 3.power switch: Control the camera power switch 4.select button of camera: Select camera that you want control 6.presetting bit controlling area: 0-9: choose presetting bit serial number; PREST: setting presetting bit;reset:restore the factory set and restart camera; note:such as set number 1 presetting bit,please press number 1 then press PREST (during presetting bit calls,press number 1 directly, then you can calls immediately ) 8.control the direction of pan-tilt button If you need pan-tilt move to the opposite direction,please select this button; 9. Control area of camera: The button that control movement and reset of camera; 10.adjust pan-tilt rotate speed This series of camera pan-tilt rotate speed is highest speed,if you need slow down the rotate speed,please press this button; note:this section video conferencing camera is fixed focus lens 10

12 720P, does not have zoom, focus, inverted, mirror and other functions; on the remote control these keys are to remain inactive. 5 qualification Camera lens type CMOS Lowest illuminat ion White balance 130million pixel 720/30fps Normal mode:1lux;night mode:0.1lux(infra LED off),0lux(infra LED on) auto Image sensor Gain adjustmen t Backlight make up Electroni c shutter Image resolution auto automatic 1/50-1/120,000S 720P(1280*720) Camera lens SNR 48dB 800milion pixel;2.5mm camera lens;angle of view170(wide angle) Focus: 30mm ~ Video output Video decoder USB Built-in 11

13 Communication interface PTZ control protocol Baud rate EIA/RS-422 EIA/RS-232C(single-track) PELCO_P,PELCO_D,VISCA 4800/9600 bps Presetting bit 10 Velocity matching Image automatic rolling-over Horizontal rotate speed Vertical rotate speed Horizontal rotation angle Vertical rotate speed Remote control Power supply Operating temperature and humidity size weight Custom settings pan-tile rotate speed Not have ο /sec 0-90 ο /sec 360 ο continuous rotate 90 ο IR wireless remote control P/T/Z DC 12V+-10%;1.2A 0-60 centigrade,0-95% RH 240x95x145mm/365x300x165mm(around packaging) 1150 g/1800 g(around packaging) 12