Straight Side Mechanical Press

Transcription

1 Straight Side Mechanical Press SNS1 SLS1series SNS1-8~3 tons SLS1-8~3 tons

2 SNS1 series Straight Side Mechanical Press >>> Straight side frame designed virtually eliminates angular deflection, providing increased precision for progressive die applications and reducing maintenance costs on tooling. >>> Zero angle deflection of frame and cost effective in tooling maintenance work. >>> Duly designed with the gis centrally mounted in line with the slide with stand longer stroke length that ensure a stale and precise tooling life span. >>> The slide area is 15%~25% greater than comparale C-frame presses to allow for larger tools. The large 6-point gis are centered in the slide ody, to provide etter resistance to off-center loads. >>> SEYI patented high-torque wet clutch and rake system provides low noise, long life operation with minimal maintenance. >>> User friendly, multi-function control system allows for easy integration of auxiliary equipment and automation. >>> Designed to allow simple integration with automated auxiliary equipments. 1

3 SLS1 series Straight Side Mechanical Press >>> Unitized straight side frame suitale for precise progressive tooling jo. >>> Zero angle deflection of frame and cost effective in tooling maintenance work. >>> High rigidity structure ensures consistent dynamic precision. >>> Greater slide area in comparison to the C type presses that can accommodate larger tooling to work more efficiently. >>> User friendly safety operation with multi-functional control system application. >>> So easy to operate and applicale to integrate with various type of press ancillary equipment. 2

4 Endurance of ias loading in the center of slider guide The guide in front and rear side is larger, the intensity promotes to doule of C type. Highly-precise guide could maintain dynamic precision, which is located at the center line of the slide and especially suitale for highly-precise pressing application. SNS1 Stroke & Pressure Curve 35 3 SNS1-3 SNS1-25 S Type 4 35 SNS1-3 SNS1-25 H Type 25 SNS1-2 3 SNS SNS1-16 SNS1-11 SNS SNS1-16 SNS1-11 SNS Stroke (mm) Stroke (mm) 3

5 High Rigidity Structure a C Type Straight Side Press 1. Rigid frame designed, without further tilting inclination comparing to conventional C frame presses. 2. Main frame rigidity structure is higher than C type, eliminates noise and pollution caused y pressing operations, and is suitale for continuous mode of operation. SLS1 Stroke & Pressure Curve S Type SLS1-3 SLS1-25 SLS1-2 SLS1-16 SLS1-11 SLS H Type SLS1-3 SLS1-25 SLS1-2 SLS1-16 SLS1-11 SLS Stroke (mm) Stroke (mm) 4

6 5

7 PPC-9 Electric Angle Monitor Power Lamp Motor Lamp Operation Lamp Touch Screen Power Switch Motor Forward/ Reverse Switch Motor Start Button Die Light Spare Hole Motor Stop Button Operation Select Switch User-Friendly >>> With touchscreen, panel monitor, easy access operation. >>> Monitor display anormal condition, easy detection. >>> Easy access functional operation, applicale for functional upgrade as duly designed on the interface. >>> Auto-tune function, more precise. >>> Human-machine-interface touchscreen, ale to select functional application as per customer needs. 6

8 SNS1 Layout Drawing W Q G D.H I R T H J K SNS1 Specifications A N B Model SNS1-8 SNS1-11 SNS1-16 SNS1-2 SNS1-25 SNS1-3 Type S H S H S H S H S H S H Capacity tf Stroke Length (I)mm Stroke per minute S.P.M. 4~75 55~125 35~65 5~11 3~55 4~95 25~45 35~8 22~4 3~6 2~35 25~5 Rated Tonnage Point mm Die height (D.H)mm Slide Adjustment (R)mm Slide Area (LRxFR)mm 7x46 8x52 9x58 1x65 11x72 115x8 Diameter of Shank Hole mm ø5.8 ø5.8 ø65 ø65 ø65 ø65 Bolster Area (LRxFR)mm 9x68 9x46 1x68 1x52 115x76 115x6 125x84 125x68 135x9 135x75 14x15 14x85 Bolster Thickness (T)mm Bolster Height (G)mm Main Motor HP x P 1x4 15x4 2x4 25x4 3x4 4x4 Slide Adjustment Motor HP x P.5x4.5x4 1x4 1x4 1x4 2x4 Window opening (KxJ)mm 44x28 37x25 5x3 42x27 56x35 47x31 62x4 52x35 68x4 57x35 76x45 65x35 Foot Size (AxB)mm 143x x x16 156x x x x x x x21 27x x2247 Required Floor Space (WxQ)mm 163x x x x x x258 Press Height (w/o Mounts) (H)mm Upper Die Weight kgf Air Pressure Required Kgf/cm² Die Cushion (Option) Capacity Tons Stroke Length mm Die Cushion Area (LRxFR)mm 48x34 48x34 56x37 7x45 7x45 7x45 Materials and specifications are suject to change without notice. General Attachment Optional Attachments 7 1. Main Motor with Inverter 2. Comination wet clutch / rake 3. Hydraulic Overload Protection 4. PPC 9 control system Digital monitor with crank angle and SPM Touch panel display with press running / error message 5. Motorized Slide Adjusting Device 6. Automatic grease lurication system 7. Counter Balancer 8. Die height indicator (scale unit.1mm) 9. Programmale Cam Switch 1. Portale Operation Stand - 1 Set 11. Antirepeat safety device 12. Main Motor FWD./REV. Controller 13. Total Counter - 1 Set 14. Preset Counter - 1 Set 15. Maintenance Counter - 1 Set 16. Spare CAM 8 Sets 17. Misfeed Detector Socket - 4 Sets (2A, 2B) 18. Air Ejector - 1 Set 19. Air Outlet - 1 Set 2. Maintenance Tools Box 1. Photoelectric Safety Device 2. Anti-viration Mounts 3. Tonnage Monitor 4. Safety Block 5. Die Lighting Device 6. Lamp Socket (1A) 7. Foot Switch 8. L/H Hands Selector switch 9. Pneumatic Die Cushion 1. Adjustale Single Shot Oiler 11. Bottom Dead Center Detector 12. Quick Die Change Device (Q.D.C.)

9 SNS1 Layout Drawing W Q G D.H I R T H J K SLS1 Specifications A N B Model SLS1-8 SLS1-11 SLS1-16 SLS1-2 SLS1-25 SLS1-3 Type S H S H S H S H S H S H Capacity tf Stroke Length (I)mm Stroke per minute S.P.M. 4~75 55~11 35~65 5~1 3~55 4~85 25~45 35~7 22~4 3~6 2~35 25~5 Rated Tonnage Point mm Die height (D.H)mm Slide Adjustment ( R)mm Slide Area (LRxFR)mm 7x46 8x52 9x58 1x65 11x72 115x8 Diameter of Shank Hole mm ø5.8 ø5.8 ø65 ø65 ø65 ø65 Bolster Area (LRxFR)mm 9x68 9x46 1x68 1x52 115x76 115x6 125x84 125x68 135x9 135x75 14x15 14x85 Bolster Thickness (T)mm Bolster Height (G)mm Main Motor HP x P 1x4 15x4 2x4 25x4 3x4 4x4 Slide Adjustment Motor HP x P.5x4.5x4 1x4 1x4 1x4 2x4 Window opening (KxJ)mm 44x28 37x25 5x3 42x27 56x35 47x31 62x4 52x35 68x4 57x35 76x45 65x35 Foot size (AxB)mm 143x x x16 156x x x x x x x21 27x x2247 Required Floor Space (WxQ)mm 163x x x x x x258 Press Height (w/o Mounts) (H)mm Upper Die Weight kgf Air Pressure Required Kgf/cm² Die Cushion (Option) Capacity Tons Stroke Length mm Die Cushion Area (LRxFR)mm 48x34 48x34 56x37 7x45 7x45 7x45 Materials and specifications are suject to change without notice. General Attachment Optional Attachments 1. Main Motor with Inverter 2. Comination wet clutch / rake 3. Hydraulic Overload Protection 4. PPC 9 control system Digital monitor with crank angle and SPM Touch panel display with press running / error message 5. Motorized Slide Adjusting Device 6. Automatic grease lurication system 7. Counter Balancer 8. Die height indicator (scale unit.1mm) 9. Programmale Cam Switch 1. Portale Operation Stand - 1 Set 11. Antirepeat safety device 12. Main Motor FWD./REV. Controller 13. Total Counter - 1 Set 14. Preset Counter - 1 Set 15. Maintenance Counter - 1 Set 16. Spare CAM 8 Sets 17. Misfeed Detector Socket - 4 Sets (2A, 2B) 18. Air Ejector - 1 Set 19. Air Outlet - 1 Set 2. Maintenance Tools Box 1. Photoelectric Safety Device 2. Anti-viration Mounts 3. Tonnage Monitor 4. Safety Block 5. Die Lighting Device 6. Lamp Socket (1A) 7. Foot Switch 8. L/H Hands Selector switch 9. Pneumatic Die Cushion 1. Adjustale Single Shot Oiler 11. Bottom Dead Center Detector 12. Quick Die Change Device (Q.D.C.) 8

10 d f s Straight Side Mechanical Press w c c 2-t c c 2-t c c 2-t ixj d f d l k d V h g u d n 2 3 p Surface of olster- Round type(standard) q Surface of s olster- Rectangular type Surface of olster- Die cushion n d p s q w Size of T-slot Surface of take-off shaft (Option) 9 Model w SNS1-8 SNS1-11 SNS1-16 SNS1-2 SNS1-25 SNS1-3 SLS1-8 SLS1-11 SLS1-16 SLS1-2 SLS1-25 SLS1-3 Type S H S H S H S H S H S H c f Ø18 Ø2 Ø22 Ø25 Ø27 Ø27 d g h i (R.LxF.B) 4x4 4x4 4x4 4x5 4x5 4x5 j Ø32 Ø32 Ø32 Ø32 Ø32 Ø32 k l n p q s t Ø3 Ø3 Ø3 Ø3 Ø3 Ø3 u v w Ø4 h7 Ø7 h7 Ø7 h7 Ø7 h7 Ø7 h7 Ø7 h7 Materials and specifications are suject to change without notice.

11 X z X z m m n q r y r y p a a1 a2 a a1 a2 a a1 a2 a a1 a2 s Without shank holder With shank holder Size of T-slot Area of slide SNS1/SLS1-8,11 With shank holder, 16~3 Without shank holder Model SNS1-8 SNS1-11 SNS1-16 SNS1-2 SNS1-25 SNS1-3 SLS1-8 SLS1-11 SLS1-16 SLS1-2 SLS1-25 SLS1-3 Type S H S H S H S H S H S H a a a m ø5.8 ø5.8 ø65 ø65 ø65 ø65 n p q s x r y z 8-Ø18 8-Ø23 8-Ø23 8-Ø23 8-Ø23 8-Ø23 Materials and specifications are suject to change without notice. 1

12 Top Development Eternal Service China Factory Headquarters Los Angels Tennessee SHIEH YIH MACHINERY INDUSTRY CO., LTD. HEADQUARTERS NO.446, Nan Shang Rd., Kueisan Hsiang, Taoyuan, Taiwan TEL: FAX: XIE YI TECH MACHINERY(CHINA) CO., LTD. KUNSHAN FACTORY TEL: FAX: DONGGUAN BRANCH TEL: FAX: SEYI-AMERICA, INC. CALIFORNIA TEL: FAX: TENNESSEE TEL: FAX: SEYI Presses Europe GmH EUROPE The contents disclosed in this catalogue are exclusive property of Shieh Yih Machinery Industry Co., Ltd. Unauthorized duplication or use part or whole of this catalogue is prohiited TEL: