Douce Hydro. Serie DHI - MT4 - Center trunnion mounting - 1 -
|
|
|
- Silvester Stokes
- 5 years ago
- Views:
Transcription
1 Standard specifications: Heavy duty hydraulic cylinders PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B Serie DHI - MT - Center trunnion mounting - 1 -
2 Standard specifications: Heavy duty hydraulic cylinders PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B Application. Design: All industries Construction with or without cushioning Dimensions in agreement with: NFPA specifications ANSI/B Bore Sizes 1 ½ through. Pressure Nominal Pressure: 3000 PSI 3. Cushioning The incorporated cushionings have a floating cushioning ring with automatic refeeding. An adjustment is foreseen at the both sides of the cylinder. Please call us in case of absorption of large cinetic energy (high speed, large mass in movement).. Fluid Standard Fluid Mineral oil. Working Temperatures -10 F to + 1 F. Velocity Piston Rod: Medium carbon steel, ground, polished after coating allowing a long duration of packings. Cylinder Body: Steel honed. Protection Body cylinder: Primer external coating. Piston Rod: Coating hard-chromed 0. inch. For a very harsh environmental conditions, we recommend to use the KERADOUCE coating. 9. Brace ring For long stroke, it is necessary to equip the cylinder with a brace ring. Its length must be added to the overall dimension of the cylinder. 10. Swivels type The standard swivels are of type GE DO from INA Elges or GE ES from SKF or equivalent suppliers. Other types are available on demand. Maxi : 19 per second - -
3 Standard specifications: Heavy duty hydraulic cylinders PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B Packing 13. Installation Cylinders are delivered with all ports plugged. The threaded pieces are protected by peelable varnish. 1. Operating The hydraulic circuits must be tight and bleeded. The presence of air in the circuit may cause seals destruction. A bleed device at the front and rear parts will equip each cylinder. The used fluid and the circuit must be totally clean. Before connection, all piping and connecting pipes must be cleaned and washed or carefully cleaned. The mechanic installation and the hydraulic follow up system circuit have not to cause impacts, vibrations, transverse loads, bending effort. Otherwise, please contact us. 1. Stocking The cylinders must be stocked under heated-up shelter with normal temperature conditions and hygrometry. On demand, in case of prolonged stocking (more than 3 months), the cylinders can be supplied with oil. 1. Marking The whole hydraulic cylinders will have an identification label to be given for spares - 3 -
4 Standard specifications: Heavy duty hydraulic cylinders PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B Serie DHI-MS Side lugs Serie DHI-MT Cap trunnion mounting Serie DHI-MS Side tapped Serie DHI-MT Center trunnion mounting Serie DHI-MX Cap tie rods extended Serie DHI-MS Side lugs Serie DHI-MX3 Head tie rods extended Serie DHI-ME Head rectangular mounting Serie DHI-MT1 Head trunnion mounting Serie DHI-ME Cap rectangular mounting - -
5 Tightness - Code DC - Piston tightness with lipseals Opposed polyurethan and guiding through bearers. - Rod tightness with V packing or lipseal polyurethan, double lip wiper, and guiding through bearers. - This type of seals is particularly recommended for hard working conditions, industry, rolling mill, steel industry, presses, naval and fluvial industry. Heavy duty hydraulic cylinders 3000 PSI Tightness - Code PP - Piston tightness with compound-seal and guiding through bearers. - Rod tightness with compound-seal, double lip wiper, and guiding through bearers. - This type of seals is particularly recommended for applications with very low friction as well as very low or very high speed. - Regulation O-Ring 0 - O-Ring 03 - O-Rring 10 - Piston sealdouble lip seal 11 - Rod seal Lip seal 1 - Wiper 0 - Piston seal compound seal 1 - Rod seal compound seal - Wiper - Bearers P Rod (chrome plated, or Keradouce coating) P3 - Rod gland P- - Floating Ring P - Cushion sleeve P - Rod gland P- Screw P9 - Screw - -
6 T WRENCH FLATS Ø KK Ø C Heavy duty hydraulic cylinders 3000 PSI Rod end detail T WRENCH FLATS Ø CC Ø C A S A S Bore Rod Thread CC Thread KK A Ø C S 1 1/ / 1/-0 /1-0 3/ 9/1 3/ 1 /-1 3/-1 1 1/ 1/1 1/ 1 /-1 3/-1 1 1/ 1/1 1/ 1 3/ 1 1/ / 1 /1 / 1 /-1 3/-1 1 1/ 1/1 1/ 1/ 1 3/ 1 1/ / 1 /1 / 1 3/ 1 1/-1 1 1/ /1 3/ 1 3/ 1 1/ / 1 /1 / 3 1/ 1 3/ 1 1/-1 1 1/ /1 3/ 1 3/-1 1 1/-1 1/ 1 1/1 / 1 3/ 1 1/-1 1 1/ /1 3/ 1 3/-1 1 1/-1 1/ 1 1/1 / 1/ 1/-1 1 /-1 3 3/ 1 1 3/-1 1 1/-1 1/ 1 1/1 / 1/ 1/-1 1 /-1 3 3/ 1 3 3/-1 1/-1 3 1/ / 1 3 1/ 3 1/-1 1/-1 3 1/ 3 3/ 1 1/ 1/-1 1 /-1 3 3/ 1 3 3/-1 1/-1 3 1/ / 1 3 1/ 3 1/-1 1/-1 3 1/ 3 3/ 1 3 3/ / 1 3 3/-1 1/-1 3 1/ / 1 3 1/ 3 1/-1 1/-1 3 1/ 3 3/ 1 3 3/ / 1 1/ 1/-1 3 1/-1 3 1/-1 3/ 1 3/-1 3 1/-1 3 1/-1 / 1 3 1/ 3 1/-1 1/-1 3 1/ 3 3/ 1 3 3/ / 1 1/ 1/-1 1/-1 1/ 3/ 1 3/-1 3 1/-1 / 1 1/ 1/-1 1/-1 1/ 3/ 1 - -
7 Ports : Standard specifications: Heavy duty hydraulic cylinders PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B Straight Thread O-Ring (SAE) National Pipe Thread Fuel (NPTF) Bore Rod NPTF SAE / 1 1/ 1 1/ / 1/ 10 1/ 3 1/ 1 1 3/ 1 3/ 1 3/ 1 3/ 1 3/ 1/ 1/ 3 3 1/ 1/ 3 3 1/ 3 3 1/ 1/ 3 1/ 1/ 1/ 1/ 10 3/ 1 3/ 1 3/ / 0 1 1/ - -
8 Serie DHI - MS Side lugs Heavy duty hydraulic cylinders 3000 PSI Ø SB XS SS + STROKE ST TS LH ZB + STROKE US Bore Rod LH SB SS TS XS ZB ST US 1 1/ / 1 1/ 3/ 3 / 3 1/ 1 3/ 1/ 1 1 1/ 3/ 3 / 3 1/ 1 3/ 3/ 1/ 1 1 1/ 1/ 3 / 1 / /1 3/ 1 3/ 1 1/ 1/ 3 / 1/ 11/1 3/ 1 1 3/ / 3 3/ / 1/1 9/1 1 1/ 1/ 1 3/ 1 3/ / 3 3/ / /1 13/1 1 1/ 1 3/ 1 3/ / 3 3/ / 9/1 1/1 1 1/ 1 3/ 1/ 3/ 1/ / /1 11/1 1 1/ 3 1/ 1 3/ 1/ 3/ 1/ / 9/1 1/1 1 1/ 1/ 3/ 1/ / 11/1 1/1 1 1/ 1 3/ 1/ 1 3/ 3/ 3/1 1 1/ 1/ 1/ 1 3/ / /1 1 1/ 1/ 1/ 1/ 1 3/ 3 1/ 9/1 1 1/ 1/ 3 1/ 1 1/ 1/ / 9 1/1 1 1/ 10 1/ 3 1/ 1 1/ 1/ 3 1/ 9 /1 1 1/ / 1 1/ 1/ 3 1/ 9 /1 1 1/ / 3 1/ 1 1/ 1/ 3 1/ 9 /1 1 1/ 10 1/ 3 3/ 1 1/ 1/ 9 3/ 3 3/ 10 1/ 1 1/ / 1 1/ 1/ 9 3/ 3 3/ 10 1/ 1 1/ 1 3 1/ 3 3/ 1 1/ 1/ 9 3/ 3 3/ 10 1/ 1 1/ 1 3 3/ 1 1/ 1/ 9 3/ 3 3/ 10 1/ 1 1/ 1 3 1/ 1 1/ 3/ 11 1/ 3 / 11 3/ 1 3/ 1 3 1/ 1/ 1 1/ 3/ 11 1/ 3 / 11 3/ 1 3/ 1 1/ 1 1/ 3/ 11 1/ 3 / 11 3/ 1 3/ 1 1/ 1/ 1 1/ 3/ 11 1/ 3 / 11 3/ 1 3/ 1 1/ 1 1/ 3/ 11 1/ 3 / 11 3/ 1 3/ 1 3 1/ 3/ 1 1/ 3/ 1 1/ 3 / 1 13/1 1 3/ 1 3/ 1 1/ 3/ 1 1/ 3 / 1 13/1 1 3/ 1 1/ 3/ 1 1/ 3/ 1 1/ 3 / 1 13/1 1 3/ 1 3/ 1 1/ 3/ 1 1/ 3 / 1 13/1 1 3/ 1 1/ 3/ 1 1/ 3/ 1 1/ 3 / 1 13/1 1 3/ 1 - -
9 Serie DHI - MS Side tapped Heavy duty hydraulic cylinders 3000 PSI TN XV ZJ + STROKE ZB + STROKE Bore Rod TN XV ZJ ZB 1 1/ / 1/ 3/ / 1 1/ 3/ 3/ / 3/ 1 3 1/1 3/ / /1 1 3/ 3 1/1 / / 11/ / 1 /1 1/1 3 9/1 1/ 1 3/ 3 1/ 1 /1 /1 3 13/1 1 3/ 3 1/ 1 /1 9/1 3 1/1 1 3/ 1/ 1 1/ 3/ 3 1/ 11/1 3 1/ 1 3/ 1/ 1 1/ 3 3 1/ 1/1 1/ 1 1/ 3 1/ 3 1/ 1/1 1 3/ 1/ / 3/1 1/1 3 1/ 3 3/ /1 1/ 1/1 3 3/ 3 3/ 9/1 1/ 1/1 3 1/ 1/ 9 1/1 1/ 1/ 1/1 3 3/ 1/ 9 /1 3 1/ 1/1 3 3/ 1/ 9 /1 3 1/ 1/1 3 1/ 1/ 9 /1 1/ 1/ 3 /1 3 1/ 1/ 10 1/ 3 1/ 3 /1 3 1/ 1/ 10 1/ 3 1/ 1/ 3 /1 3 1/ 1/ 10 1/ 1/ 3 /1 3 1/ 1/ 10 1/ 3 1/ 3 3/ 3 13/1 / 11 3/ 3 1/ 1/ 3 3/ 3 13/1 / 11 3/ 1/ 3 3/ 3 13/1 / 11 3/ 1/ 1/ 3 3/ 3 13/1 / 11 3/ 1/ 3 3/ 3 13/1 / 11 3/ 3 1/ 9 1/ 1/ 3 1/1 / 1 13/1 9 1/ 1/ 3 1/1 / 1 13/1 1/ 9 1/ 1/ 3 1/1 / 1 13/1 9 1/ 1/ 3 1/1 / 1 13/1 1/ 9 1/ 1/ 3 1/1 / 1 13/1-9 -
10 Serie DHI - MX Cap tie rods extended Heavy duty hydraulic cylinders 3000 PSI BB TG TG ZJ + STROKE Ø DD Bore Rod TG DD BB ZJ 1 1/ / 1/ 1.3 3/- 1 3/ / 1 1/ 1.3 3/- 1 3/ / /1 1 3/ 3.0 1/ /1 1/ 1 3 1/. 1/ /1 1/ 1/ 1 3/ 3 1/. 1/ /1 3/ 1 3/ 3 1/. 1/ /1 / 1 3/ 1/ 3. /-1 /1 1/ 3 1/ 1 3/ 1/ 3. /-1 /1 3/ 1/ 3. /-1 /1 1/ 1 3/ 3. /-1 /1 / 3. /-1 /1 3/ 1/ 3. /-1 /1 1/.9 /-1 3 3/1 1/ 1/ 1/.9 /-1 3 3/1 1/ 3 1/.9 /-1 3 3/1 1/ 3 1/.9 /-1 3 3/1 1/ 1/ 1/ / 9 / 3 1/ / 9 / 3 1/ 1/ / 9 / 1/ / 9 / 3 1/. 1 1/-1 1/ 10 3/ 3 1/ 1/. 1 1/-1 1/ 10 3/ 1/. 1 1/-1 1/ 10 3/ 1/ 1/. 1 1/-1 1/ 10 3/ 1/. 1 1/-1 1/ 10 3/ 3 1/ 9 1/.0 1 1/-1 1/ 11 3/ 9 1/.0 1 1/-1 1/ 11 3/ 1/ 9 1/.0 1 1/-1 1/ 11 3/ 9 1/.0 1 1/-1 1/ 11 3/ 1/ 9 1/.0 1 1/-1 1/ 11 3/
11 TG Serie DHI - MX3 Head tie rods extended Heavy duty hydraulic cylinders 3000 PSI Ø DD BB TG ZJ + STROKE Bore Rod TG BB DD ZJ 1 1/ / 1/ / 3/- / 1 1/ / 3/ /1 1/-0 1 3/ /1 1/-0 1/ 1 3 1/. 1 13/1 1/-0 1/ 1/ 1 3/ 3 1/. 1 13/1 1/-0 3/ 1 3/ 3 1/. 1 13/1 1/-0 / 1 3/ 1/ 3. /1 /-1 1/ 3 1/ 1 3/ 1/ 3. /1 /-1 3/ 1/ 3. /1 /-1 1/ 1 3/ 3. /1 /-1 / 3. /1 /-1 3/ 1/ 3. /1 /-1 1/.9 3 3/1 /-1 1/ 1/ 1/.9 3 3/1 /-1 1/ 3 1/.9 3 3/1 /-1 1/ 3 1/.9 3 3/1 /-1 1/ 1/ 1/.3 3 / / 3 1/.3 3 / / 3 1/ 1/.3 3 / / 1/.3 3 / / 3 1/. 1/ 1 1/ / 3 1/ 1/. 1/ 1 1/ / 1/. 1/ 1 1/ / 1/ 1/. 1/ 1 1/ / 1/. 1/ 1 1/ / 3 1/ 9 1/.0 1/ 1 1/ / 9 1/.0 1/ 1 1/ / 1/ 9 1/.0 1/ 1 1/ / 9 1/.0 1/ 1 1/ / 1/ 9 1/.0 1/ 1 1/ /
12 Serie DHI - MT1 Head trunnion mounting Heavy duty hydraulic cylinders 3000 PSI ZB + STROKE Ø TD TL TL XV Bore Rod TL TD+.000/-.001 XV ZB 1 1/ / 1/ / 1 1/ / 3/ / 1.3 1/ /1 1 3/ 3 1 3/ 1.3 1/ 11/ / 1 3/ 1.3 1/ 9/1 1/ 1 3/ 3 1/ 1 3/ 1.3 1/ 13/1 1 3/ 3 1/ 1 3/ 1.3 3/ 1/1 1 3/ 1/ 1 3/ 1.0 / 11/1 3 1/ 1 3/ 1/ 1 3/ 1.0 / 1/1 1/ 1 3/ /1 1 3/ 1 3/ 1.0 / 3/1 1 3/ /1 1/ 1 3/ / 9/1 1/ 1 3/ /1 1/ 1/ 1 3/ / 9 /1 3 1/ 1 3/ / 9 /1 3 1/ 1 3/ / 9 /1 1/ 1/ / 10 1/ 3 1/ / 10 1/ 3 1/ 1/ / 10 1/ 1/ / 10 1/ 3 1/ 1/.00 3 / 11 3/ 3 1/ 1/ 1/.00 3 / 11 3/ 1/ 1/.00 3 / 11 3/ 1/ 1/ 1/.00 3 / 11 3/ 1/ 1/.00 3 / 11 3/ 3 1/ 9 1/ / 1 13/1 9 1/ / 1 13/1 1/ 9 1/ / 1 13/1 9 1/ / 1 13/1 1/ 9 1/ / 1 13/1-1 -
13 Serie DHI - MT Cap trunnion mounting Heavy duty hydraulic cylinders 3000 PSI ZB + STROKE Ø TL TL XV + STROKE Bore Rod TL TD+.000/-.001 XV ZB 1 1/ / 1/ / 1 1/ / 3/ / 1.3 1/ /1 1 3/ 3 1 3/ 1.3 1/ 11/ / 1 3/ 1.3 3/ 9/1 1/ 1 3/ 3 1/ 1 3/ 1.3 / 13/1 1 3/ 3 1/ 1 3/ 1.3 / 1/1 1 3/ 1/ 1 3/ 1.0 1/ 11/1 3 1/ 1 3/ 1/ 1 3/ 1.0 1/ 1/1 1/ 1 3/ 1.0 / 1/1 1 3/ 1 3/ 1.0 3/ 3/1 1 3/ 1.0 / /1 1/ 1 3/ 1.0 1/ 9/1 1/ 1 3/ 1.0 3/ 9 1/1 1/ 1/ 1 3/ 1.0 / 9 /1 3 1/ 1 3/ 1.0 / 9 /1 3 1/ 1 3/ 1.0 / 9 /1 1/ 1/.000 3/ 10 1/ 3 1/.000 3/ 10 1/ 3 1/ 1/.000 3/ 10 1/ 1/.000 3/ 10 1/ 3 1/ 1/ / 11 3/ 3 1/ 1/ 1/ / 11 3/ 1/ 1/ / 11 3/ 1/ 1/ 1/ / 11 3/ 1/ 1/ / 11 3/ 3 1/ 9 1/ / 1 13/1 9 1/ / 1 13/1 1/ 9 1/ / 1 13/1 9 1/ / 1 13/1 1/ 9 1/ / 1 13/1-13 -
14 Serie DHI - MT Center trunnion mounting Heavy duty hydraulic cylinders 3000 PSI BD Ø TD E UW TL TL XV ZB + STROKE Bore Rod TD TL UW E Min.XV BD / /1 1/ 3 /1 1 1/ 1 1/ /1 1/ 3 13/1 1 1/ 1 1 3/ 1 3/ 3 1/ 1/ 3 3 1/1 1 1/3 1 3/ 1 3/ 1 3/ 3 1/ 1/ 3 3/1 1 1/ / 1 3/ / 3 1/ 3 1/1 1 11/1 1/ 1 3/ 1 3/ 1 3/ / 3 1/ 3/1 1 11/1 1 3/ 1 3/ 1 3/ / 3 1/ /1 1 11/1 1 3/ 1 3/ 1 3/ 1/ 11/1 1/3 3 1/ 1 3/ 1 3/ 1 3/ 1/ 1/1 1/3 1 3/ 1 3/ 1/ 1/1 1/3 1 3/ 1 3/ 1/ / 1/1 / 1 3/ 1/ / 1/1 / 1/ 1 3/ 1/ / /1 / 1/ 1 3/ 1/ 1/ 1/1 3 /1 1/ 1/ 1 3/ 1/ 1/ /1 3 /1 3 1/ 1 3/ 1/ 1/ /1 3 /1 3 1/ 1/ 1 3/ 1/ /1 3 /1 1/ 3 1/ 10 3/ 1/ 1/1 3 1/ / 10 3/ 1/ 1/1 3 1/1 3 1/ 3 1/ 10 3/ 1/ 1/1 3 1/1 3 1/ 10 3/ 1/ 1/1 3 1/ / 1/ 9 3/ 11 / 1/ 9/1 11/1 3 1/ 3 1/ 1/ 9 3/ 11 / 1/ 9/1 11/1 3 1/ 1/ 9 3/ 11 / 1/ 9/1 11/1 1/ 3 1/ 1/ 9 3/ 11 / 1/ 9/1 11/1 3 1/ 1/ 9 3/ 11 / 1/ 9/1 11/1 3 1/ /1 9 1/ 1/1 1/ /1 9 1/ 1/1 1/ 1/ /1 9 1/ 1/1 1/ /1 9 1/ 1/1 1/ 1/ /1 9 1/ 1/1 1/ - 1 -
15 Serie DHI - MP1 Cap fixed clevis Heavy duty hydraulic cylinders 3000 PSI RADIUS MR CW CB CW CD XC + STROKE L Bore Rod L CB CD+.000/-.00 XC MR 1 1/ / 3/ 3/ / 1/ / 1 3/ 3/ / 1/ / 1 1 1/ 1 1/ 0.1 1/ 3 1/1 1 3/ 1 1/ 1 1/ 0.1 1/ 3 1/ / 1 1/ 0.1 3/ 3 1/ 1/1 1/ 1 3/ 1 1/ 1 1/ 0.1 / 3 1/ 1/1 1 3/ 1 1/ 1 1/ 0.1 / 3 1/ 1/1 1 3/ 1 1/ 1 1/ / 1/ 1 3/1 3 1/ 1 3/ 1 1/ 1 1/ / 1/ 1 3/1 1 1/ 1 1/ / 1 3/1 1 3/ 1/ / 1 / 1/ / 1 / 1/ 1/ / 1 / 1/ 1/ / 1/ 1/ 1/ 1/ 1/ / 1/ 1/ 3 1/ 1/ / 1/ 1/ 3 1/ 1/ 1/ / 1/ 1/ 1/ 1/ / 1/ 3/ 3 1/ 1/ / 1/ 3/ 3 1/ 1/ 1/ / 1/ 3/ 1/ 1/ / 1/ 3/ / 1/ / 3 1/ / 1/ / / 1/ / 1/ / 1/ / / 1/ / 3 1/ 3 1/ / 3 1/ 3 1/ / 3 1/ 1/ 3 1/ / 3 1/ 3 1/ / 3 1/ 1/ 3 1/ / 3 1/ - 1 -
16 Serie DHI - ME - Head rectangular mounting Heavy duty hydraulic cylinders 3000 PSI TO FB HOLES R RD UO WF ZB + STROKE Bore Rod UO R TO FB WF RD ZB 1 1/ / 1/ /1 3/ 1 1/ 1 1/ /1 3/ 1 3/ 1/ 3/ 1 1/.0 1/ 1/ 1 3/ 1/ /1 1 3/ 1/.0 1/ 1/ 1 / 3 11/1 1 /. / 1/ 1 3/ 1/ 9/1 1/ 1 3/ /. / 1/ 1 / 3 13/1 1 3/ /. / 1/ 1 / 3 1/ 1/1 1 3/ 1/ 3. / / 1 / 3 11/1 3 1/ 1 3/ 1/ 3. / / 1 / 3 1/ 1/1 1/ 3. / / 1/1 1 3/ / 3. 3/ / 1 / 3 1/ 3/1 / 3. 3/ / /1 1/ / 3. 3/ / 1/ 1/ 9/1 9 3/.9 3/1 / 9 1/1 1/ 9 3/.9 3/1 / 1/ 1/ 9 / /.9 3/1 / 1/ 1/ 9 /1 3 1/ 9 3/.9 3/1 / 1/ 3/ 9 /1 1/ 11 1/.3 9 /1 1 1/ 1/ 10 1/ /.3 9 /1 1 1/ 1/ 10 1/ 3 1/ 11 1/.3 9 /1 1 1/ 3/ 10 1/ 11 1/.3 9 /1 1 1/ 1/ 10 1/ 3 1 /. 10 / 1 1/ 1/ 1/ 11 3/ 3 1/ 1 /. 10 / 1 1/ 1/ 3/ 11 3/ 1 /. 10 / 1 1/ 1/ 1/ 11 3/ 1/ 1 /. 10 / 1 1/ 1/ 11 3/ 1 /. 10 / 1 1/ 1/ 1/ 11 3/ 3 1/ /1 1 1/ 1/ 3/ 1 13/ /1 1 1/ 1/ 1/ 1 13/1 1/ /1 1 1/ 1/ 1 13/ /1 1 1/ 1/ 1/ 1 13/1 1/ /1 1 1/ 1/ 1/ 1 13/1-1 -
17 Serie DHI - ME - Cap rectangular mounting Heavy duty hydraulic cylinders PSI TO FB HOLES R ZJ +STROKE UO Bore Rod FB R TO UO ZJ 1 1/ / / /1 1/ / 1 / /1 1/ 1 9/1.0 1/ 1/ 1 3/ 9/1.0 1/ 1/ 1/ 1 9/1. / / 1/ 1/ 1 3/ 9/1. / / 3/ 1 3/ 9/1. / / / 1 3/ 11/1 3. / 1/ 1/ 3 1/ 1 3/ 11/1 3. / 1/ 3/ 11/1 3. / 1/ 1/ 1 3/ 11/1 3. 3/ / / 11/1 3. 3/ / 3/ 1/ 11/1 3. 3/ / 1/1.9 3/1 9 3/ 1/ 1/ 1/1.9 3/1 9 3/ 1/ 3 1/1.9 3/1 9 3/ 1/ 3 1/ 1/1.9 3/1 9 3/ 1/ 1/ 1 1/1.3 9 /1 11 1/ 9 / 3 1 1/1.3 9 /1 11 1/ 9 / 3 1/ 1 1/1.3 9 /1 11 1/ 9 / 1 1/1.3 9 /1 11 1/ 9 / 3 1 3/1. 10 / 1 / 10 3/ 3 1/ 1 3/1. 10 / 1 / 10 3/ 1 3/1. 10 / 1 / 10 3/ 1/ 1 3/1. 10 / 1 / 10 3/ 1 3/1. 10 / 1 / 10 3/ 3 1/ 1 / / / 1 / / / 1/ 1 / / / 1 / / / 1/ 1 / / / - 1 -
18 hydraulic cylinders PSI Cushioning Calculation Cushioning Calculation E : Energy in-lb P : Pressure p.s.i V : Maxi Velocity in/s M : Total mass inertia with piston-rod W/3.1 la : Cushion length in g : Gravity constant 3.1 in/sec² α : Tilt angle In order to know the maximum cushionable mass by the hydraulic cylinder, please the following formulas Horizontal E = 1/ M V² Oblique B A EA = 1/ M V² - M.g.la.sin α EB = 1/ M V² + M.g.la.sin α α - 1 -
19 Heavy duty hydraulic cylinders PSI Cushioning Calculation Vertical EA = 1/ M V² - M.g.la B A EB = 1/ M V² + M.g.la For hydraulic cylinders with balance valve, please see case horizontal E = 1/ M V²
20 Standard specifications: Heavy duty hydraulic cylinders PSI Cylinder Push and Pull Forces Bore Rod Forces Lbs Area in² 0 PSI 100 PSI 0 PSI 00 PSI 0 PSI 1000 PSI 100 PSI 000 PSI 3000 PSI Push / / Pull Pull Push Pull / Pull Push / 1 Pull / Pull / Pull Push / 1 3/ Pull / Pull Pull Push / Pull Pull / Pull Push Pull / Pull Pull / Pull Push / Pull Pull / Pull Pull Push Pull / Pull Pull / Pull Pull Push / Pull Pull / Pull Pull / Pull
21 Standard specifications: Heavy duty hydraulic cylinders PSI Hydraulic cylinder speeds (Inches / Minutes) Bore Rod Area in² / / / / / / / 1 3/ / / / / / / / / / / / /
22 How to order DHI - hydraulic cylinders Serie DHI Heavy duty hydraulic cylinders 3000 PSI Example of designation: Serie DHI / MT A E G I N O 10 S Choice Bore diameter Choice Rod diameter Choice Style Mounting Device MS Side lugs MS Side tapped MX Cap tie rods extended MX3 Head tie rods extended MT1 Head trunnion MT Cap trunnion X MT Center trunnion MP1 Cap fixed clevis ME Head rectangular Choice Working Conditions X A Normal temperature 10 F to 1 F B High temperature up to 330 F C Fluid difficulty inflamable Choice Piston rod coating D Keradouce coating X E Hard chrome plated F Nickel-Chrome plated Choice Pistons seals X G Double acting seal H Compound seal Choice Rod seals X I Single lip seal J Compound seal Choice Cushioning K Without cushioning L With front cushion M With rear cushion X N With front and rear cushion Choice Ports X O SAE P NPTF Choice Stroke 10 inch Choice Brace ring for long stroke Q With brace ring X R Without brace ring Choice Rod End X S Thread CC T Thread KK - -
23 For more information, please contact: EUROPE, ASIA, AFRICA, SOUTH AMERICA, OCEANIA: Ms. Anne-Frédérique LEROY Export Sales Manager Tel : + 33 / (0) Fax : + 33 / (0)3 3 afleroy@doucehydro.com NORTH AMERICA : Mrs. Mathilde GILLET Sales Manager Tel : + 1 / Fax: + 1 / mgillet@doucehydro.com FRANCE : Sales Department Tel : Fax : commercialdh@doucehydro.com ********************************************** Douce : We stand behind each cylinder we manufacture. ********************************************** - 3 -
FULL COLOR TAB #7 MSE, MSR
FULL COLOR TAB #7 MSE, MSR 117 MS - How to Order FORCE MULTIPLYING CYLINDERS SERIES MS : MULTI-STAGE The TRD MSE and MSR Series are double acting, single rod end cylinders that multiply the force output
ICD Parker Configuration System Quick Reference Guide
Model Number 4.00BB2HLU14A5.000 1.00 R1.75 R1.63 2H Heavy Duty Hydraulic Tie Rod Cylinders English Model Number 4.00BB2HLU14A5.000 LIST $1297.35 LIST $1297.35 (UNITED STATES DOLLAR) +.000 2.374 -.002 1.750
Series VH Hydraulic Cylinders
Series VH Series VH very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
Series VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
Inch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer
Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer
Inductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
Universal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator
Heavy Industrial Shock Absorbers ECA 2 to ECA 4 Self-Compensating
67 Heavy Industrial Shock Absorbers ECA to ECA 4 Enertrols durable ECA, ECA 3 and 4" Bore Series of self-compensating shock absorbers have been designed to handle extremely heavy-duty applications and
SINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm
SINGLE OR DOUBLE ACTING CYLINDERS, to mm CONFORMING WITH ISO 43 - CETOP - AFNOR STANDARDS ISOCLAIR - SERIES 435 - TYPES : C-AS, CC-AS P-GB-R5 ISOCLAIR AIR CYLINDERS to mm OPERATIONAL DIAGRAMS ( to mm)
R./57100/M, R./57300/M, Roundline cylinder Magnetic piston, single acting
R./700/M, R./700/M, Roundline cylinder > >... 0 mm > > Saves 0% space over the basic length of a corresponding ISO/ VDM cylinder > > Standard magnetic piston for full control system versatility > > Low
Industrial Shock Absorbers
EA to EA3 Enertrols rugged EA and EA 3 Series heavy industrial adjustable shock absorbers are available to handle your most demanding linear deceleration applications. Energy capacity ratings are high
RM/28000/M, ISO cylinder Magnetic piston, single acting
> > Ø 0... 5 mm > > Standard magnetic piston for full control system versatility > > Nose mounting nut and piston rod locknut as standard > > Conforming to ISO > > Optional port arrangement for compact
MPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
ST4 AIR SERIES ST5 OIL SERIES MEDIUM DUTY HYDRAULIC & HEAVY DUTY PNEUMATIC
MDIUM DUT HDRULIC & HV DUT PNUMTIC ST IR SRIS ST5 OIL SRIS ST5 - HDRULIC MDIUM DUT SRVICS ST - PNUMTIC HV DUT SRVICS INDUSTRIL TI ROD CONSTRUCTION STNDRD OR SIZS.5 THROUH 8 PISTON ROD DIMTRS 5/8 THROUH
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 57 Individual mounting Series inline 35 To accumulator Sealed solenoid enclosure 100 200 Ext. pilot port Pilot valve Function plate From accumulator
Stainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
Grease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 1300 Individual mounting Series sub-base plug-in 35 100 Pilot air accumulator Internal pilot supply check valve Moisture and dust seal Manual operator
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
SCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
AIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
RM/92000/M, Short stroke cylinder Magnetic piston, double acting
> Ø... 00 mm > One third the basic length of a corresponding ISO/VDM model > Fully non-corrodible specification > Standard magnetic piston for full control system versatility > Low friction, long life
Piston rod cylinder Guide cylinders Series MSN. Brochure
Brochure 2 ini slide, narrow version Ø 6-6 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide 3 overview overview 9 Sensors and sensor mountings, accessories Sensor,
GXT 665R Mobile Shear PARTS MANUAL
GXT 665R Mobile Shear PARTS MANUAL CONTACT INFORMATION World Headquarters Genesis Attachments 1000 Genesis Drive Superior, WI 54880 USA Toll Free: 888-SHEAR-IT (888-743-2748) Phone: 715.395.5252 Fax: 715.395.5255
T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
Data is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
RACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8
SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
Pipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
F60 MT Triple Stage Mast
P ARTS MANUAL This manual contains standard production Product Identification Numbers. Special Engineered Options not included. F60 MT Triple Stage Mast FOR PARTS AND SERVICE: TELEPHONE: (888) 946-3330
T E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT
Standard oil drain plug
PRODUCTS STANDARD OIL DRAIN PLUG STANDARD DRAIN SB Standard oil drain plug The Standard Drain is the original Femco oil drain plug, and was introduced in 1983 to change oil in a quick, clean and environmentally
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.
MESSKO MPreC PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS. MESSKO MPreC -Series LARGE MESSKO PRESSURE RELIEF DEVICE (LMPRD) Operating pressure Project/Reference: Gasket material MPreC Typ 4 psi; 0.28
VSG, VSL, VSKH and VSKV Two-line Metering Devices
VSG-KR These high quality, galvanized steel metering devices are designed for high-pressure (up to 400 bar) two-line systems. They can also be used in low to medium-pressure systems. They are available
CLASS II ISSFP. Integral Sideshifting and Fork Positioning Carriages
U SER MANUAL CLASS II ISSFP Integral Sideshifting and Fork Positioning Carriages This manual contains standard production Product Identification Numbers. Special Engineered Options not included. FOR PARTS
Double piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic
Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
Piston rod cylinders Standard cylinders ISO 15552, Series ICL. Brochure
Brochure 2 Bosch Rexroth AG Pneumatics Profile cylinder, Ø 32-125 mm Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 4 Cylinder
SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
Clamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
Wiper AY Profile. AY Profile, Premium Double-Lipped Wiper. Technical Data.
Wiper Y Y, Premium Double-Lipped Wiper Catalog PS 5370/US The Y profile can be used as a heavy to light duty wiper. When used in high pressure applications in conjunction with the proper Parker rod seals,
Cylinders. CGT Series. Compact Guide Slides. We re everywhere you need us to be! 141
We re everywhere you need us to be! CGT Series Compact Guide Slides Pneumatic-Catalogue-GB-28-1 www.numatics.com 141 CGT Series : CGT Series General Information CGT Series is ideal where high load and
Variable Stroke Straight-Line Action
4. FO Series FL Series G Series Type of Mounting: Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and (two-handed operation) Type of Mounting: Type of Actuation: Locking
T2 B Series. Compact Height Nitrogen Gas Springs
T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain
SFC KOENIG Product Catalog
SFC KOENIG Product Catalog 8 2016 SFC KOENIG I www.sfckoenig.com The World s Leading Sealing & Flow Control Technology With over 3 billion parts installed and failure rates less than 1 part per million,
LINEAR SENSORS. Potentiometric and Contactless Position Sensors
LINEAR SENSORS Potentiometric and Contactless Position Sensors www.megatron.de MEGATRON Our success story MEGATRON is a specialist for mechatronic components for more than 50 years. In keeping with our
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH
Thermowell for Screwing
Accessories - KC0126-2013/09 Thermowell for Screwing Nominal pressure PN160. Inner bore diameter 9 mm. WT70 C 01 Temperature cylindrical thermowell for screwing, PN160 V900 9 Z01 M20x1. 5 P02 M27x2 Code
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
VJ-1618 INSTALLATION MANUAL
Please read this manual before using Thank you for purchasing a MUTOH product. This manual explains the steps for unpacking, mounting and basic installation before using the MUTOH Full-color inkjet printer
Rodless cylinders Rodless cylinders Series RMC. Brochure
Brochure Bosch Rexroth AG Pneumatics -SB Ø 16-32 mm double-acting with magnetic piston Slide bearing guide cushioning: pneumatically, adjustable 4 -SB Ø 16-32 mm double-acting with magnetic piston long
ELECTRONIC MANAGEMENT UNIT REFERENCE AXIS POSITIONER. Code CKP CKV CKF CKM
Atos spa 08 Sesto Calende, Italy Fax 0 90005 Table B07/E Servocylinders type CK* with builtin transducer ISO 600 DIN 55, AFNOR NFE 806 double acting nominal pressure 60 bar maximum pressure 50 bar Schematical
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
MarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
RJF TV Ethernet Connection System for Harsh Environment
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
Subsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
Roxar SandLog High Accuracy Sand/Erosion Monitoring
FA-T201-C Product Data Sheet 01.12.2016 High Accuracy Sand/Erosion Monitoring The effective management of sand is important for the integrity of oil and gas assets and for optimizing production. Together
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
Product Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.
Product Overview Product Overview Flange Input - Shaft Right Hand Flange Input - Shaft Double End Shaft Input - Shaft Left Hand How To Order 5:1-60:1 ratios sizes 1.33-3.25 One piece # Fc20 all cast iron
Universal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
T2 B Series. Compact Height Nitrogen Gas Springs
T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Terminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
pneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
Loader Directional Control Valve
Engineering & Manufacturing Solutions Specifications: 10 gpm (38 lpm) Nominal Capacity Rated up to 4000 psi (275 bar) Port Sizes: - Inlet/Outlet #8 SAE - Work Ports #6 or #8 SAE Weighs 10.9 lbs. (4.9 kg)
Electromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
EB7650TH 76CC BACKPACKER BLOWER 4-STROKE
10-2014 EB7650TH 76CC BACKPACKER BLOWER 4-STROKE 49 50 48 52 53 51 A09 31 32 45 44 43 47 46 39 41 30 33 34 35 37 36 38 27 28 29 5 6 7 8 10 11 12 13 15 17 16 18 19 14 2 1 20 21 55 22 23 24 239 238 A08 56
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
Parts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More Precision. indusensor // Linear inductive displacement sensors
More Precision indusensor // Linear inductive displacement sensors 12 Long-stroke sensors for hydraulics & pneumatics indusensor EDS - Measuring ranges from 75... 630 mm - Linearity: ± 0.3 % FSO - Integrated
Inline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120
Inline filter RE 50/09.0 Replaces: 0.09 / Types 00 FLEN 060 to 060; 00 FLE 005, 0055, 00 Nominal sizes according to DIN 550: 060 to 060 Nominal sizes according to BRFS: 005, 0055, 00 Nominal pressure 00
Manual Clamps for Automotive Prototype Production
Manual Clamp interchangeable with 82M-6 This newest version provides more clamp arm variations and in addition two hold open devices. Opening angle can be reduced now. Page 15.2 New products 15.0 Notes
Taylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines.
HPX Hydraulics Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. Non-spill, flush face design With non-spill flush faces, the HPX connector prevents
Compliance with API Standard 670 the PRO Product Standard for Proximity Probes
Connection Technology Center, Inc. 7939 Rae Boulevard Victor, New York 14564 Toll Free: (800) 999-5290 Phone: (585) 924-5900 Fax: (585) 924-4680 Compliance with API Standard 670 the PRO Product Standard
VJ-1614 INSTALLATION MANUAL
VJ-6 INSTALLATION MANUAL Please read this manual before using Thank you for purchasing a MUTOH product. This manual explains the steps for unpacking, mounting and basic installation before using the MUTOH
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
Spare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start
Spare parts list Forward and reversible plate MV 0, MV 0 Honda MV Hatz Electric start MV 0 Honda MV Hatz Electric start Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 00 0 0c MV
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated