XC-7500 XC-8500CE CMA-87. Component/OEM XC-8500CE XC-7500 CMA-87 OUTLINE DIMENSIONS FEATURES. Progressive Scan B/W CCD Camera Module

Transcription

1 ComponentOEM Progressive Scan BW CCD Camera Module XC-8500CE 12" IT CCD 659(H) X 494(V), EIA XC-8500CE 12" IT CCD 782(H) X 582(V), CCIR OUTLINE The XC-8500CE is a frame shutter camera that mounts a newly developed CCD. Square grid cells most suitable for a machine vision are used for this CCD that enables all pixels to be read. The resolution is equal in the vertical and horizontal directions. Therefore, it is not required to correct the dimension on the image processing side. The conforms to an EIA system of 659(H) x 494(V), and the XC-8500CE conforms to a higher-resolution CCIR system of 782(H) x 582(V). The and XC-8500CE enable a trigger frame shutter (E-DPISHA) control function, signal format conversion function, and high-rate scanning function when they are connected with an optional memory adaptor (). Moreover, the still pictures of various high-speed movable objects can be read at a high resolution (in the horizontal and vertical directions). FEATURES XC-8500CE 12"Hyper HAD IT CCD Square Pixels 9.9 x 9.9µm(), 8.3 x 8.3µm(XC-8500CE) Frame Normal : 160~110,000sec, 150~110,000sec, Flickerless E-DPISHA : Low-Speed : oo~approx.160sec, oo~approx.150sec Normal-Speed : 11,000~111,000sec, 11,000~110,000sec High-Speed : 110,000~1100,000sec External Control : oo~160~110,000sec, oo~150~110,000sec Three Mode s Interlace(160sec, 150sec)-2I mode Non interlace(160sec, 150sec)-mode Non interlace(130sec, 125sec)-1N mode Restart Reset Function (Trigger Input) E-DPISHA(Frame )Control Signal format conversion EIACCIR, VGASVGA High-Rate scan-up to CE DIMENSIS

2 CCD OUTPUT WAVE TIMING CHART Optical size:12-inch format Total number of pixels:692(h)x504(v) Efective picture elements:659(h)x494(v) Number of video output pixels:648(h)x485(v) Unit cell size:9.9µm(h)x9.9µm(v) XC-8500CE Optical size:12-inch format Total number of pixels:823(hx592(v) Efective picture elements:782(h)x582(v) Number of video output pixels:767(h)x575(v) Unit cell size:8.3µm(h)x8.3µm(v) MTF MTF,SPECTRAL RESPSE Spectral Response INTERNAL SWITCH FUNCTIS E-DPISHA Location Set the E-DPISHA switch on SG-235 board speed (sec) SW Location No. Function Factory Setting S1 High-Rate OFF OFF S2 Normal MB-612 0:160 1:1125 2:1250 3:1500 4: : : : :FL 9:FL S1 VD 75 termination OFF SG-235 S2 INT HV OUT EXT HV IN EXT HV IN S3 HD 75 termination OFF S4 R.Rmode VDpulse 1~4 1:OFF 2:OFF S5 Trigger polarity +- + S6 E-DPISHA Speed approx 11000sec S7 E-DPISHA WE(0V-1V) 1:OFF(-1v) VIDEO(3V1V) 2:OFF(1v) RESETN RST 3:OFF(N) WE +- 4:OFF( ) HIGH SPEED 5:OFF LOW SPEED 6:OFF S1 VIDEO 1 r OFF OFF PR-214 S2 Gain tracking MANAUTO MAN S3 VIDEO 2 r OFF OFF XC-8500CE E-DPISHA speed (sec) SW This function accumulates electric charges with the external input trigger pulse as reference, places them on a continuous sync signal, and outputs a video signal. The objects that move at high speed are recognized using a sensor, and the image can be precisely shot in the fixed place. Normal speed (shown in the figure on the left), low speed, high speed, and external control speed are available as the shutter speed. The shutter operates in the range of oo to 1100,000 sec.

3 VARIOUS SHUTTER FUNCTIS NORMAL SHUTTER(N.s.) Rotary Switch MB-612 board E-DPISHA SG-235 board Low-Speed(E-Ls) (for long exposure) Normal-Speed(E-Ns) Extenal Control(E-Tg) (wide range speed by trigger width control) High-Speed(E-Hs) (for capturing high speed object) E-Ls 2TRG input 150 or , , ,000 S6 : Setting Speed S7 : Setting E-DPISHA *In case of, the connection with and E-Tg mode are available after # Position Speed(sec) OFF Position Speed(sec) FL(Flickerless) FL(Flickerless) oo This shutter speed is used when a continuous picture without blurring is required. This shutter speed is used to obtain one frame of still picture by inputting any trigger pulse. N.s. *E-Tg E-Ns. E-Hs *with (Internal SW) *with (TRG through) Sec. (Factory setting) One-Shot Memory of E-DPISHA This function controls the E-DPISHA frame shutter by inputting a trigger pulse and memorizes the simultaneous timing signal output from the VIDEO OUT 1 and 2 terminals of the camera. Sports Mode High-Rate Scanning The image in a CCD can be read partially (in the vertical center portion)at high speed.this function is useful in the field where a shorter trigger cycle than one field is required. (1.5, 2, 3, and 4 times the normal speed) Example) XC-8500CE: lines at 24 times the normal speed : lines at 24 times the normal speed In the sports mode, a continuous picture at two times the normal speed (1100 sec.) can be read as a 50-field (CCIRPAL) output by combination with the XC-8500CE. Since 1100 sec. are precisely required in the sports world, this mode can be used for video recording. Signal Format Conversion VIDEO OUT VGA SVGA EIA CCIR *7500 * 8500CE Scan Convert Out 646x Frame 767x Frame 646x Frame 767x Frame *In case of,the above function is available after #500001

4 CDITIS & TIMING FOR SHUTTER FUNCTI Normal Mode The connection for normal operation and normal shutter. Image O = ODD field image E = EVEN field image XC-8500CE Continuance image Sync mode VIDEO OUT 1 VIDEO OUT 2 InternalExternal 2I 1N O1,E2 O1+E1 E1,O2 Internal E1,E2 O1,O2 The E-DPISHA mode can capture one Extarnal Trigger shot image by external trigger. Non Reset Mode(one shot imagestandard sync) (S7:Factory setting) The sync signal at the VIDEO OUT 2 terminal is the same as that at the VIDEO OUT 1 terminal. In the 2I mode, O1, O2E1,E2 signals can be continuously output by inputting a non-interlaced external sync signal. Range Low-Speed Normal-Speed High-Speed External Control Image ( ):XC-8500CE XC-8500CE One shot image Sync InternalExternal mode 2I 1N VIDEO OUT 1 O(E) O+E VIDEO OUT 2 E(O) In the mode, the VIDEO OUT 1 and 2 terminals do not operate. The sync signal at the VIDEO OUT 2 terminal is the same as that at the VIDEO OUT 1 terminal. Reset Mode(one shot imagenon standard sync) Write Enable Pulse (WEN) In a camera, the write enable pulse is output 1V before a video output signal is produced or it is output simultaneously with a video output signal. This pulse is used for combination with peripheral equipment. Image Range Low-Speed Normal-Speed High-Speed External Control ( ):XC-8500CE XC-8500CE One shot image Sync Internal mode 2I 1N VIDEO OUT 1 O(E) VIDEO OUT 2 E(O) In the 1N and modes, the VIDEO OUT 1 and 2 terminals do not operate. The sync signal at the VIDEO OUT 2 terminal is the same as that at the VIDEO OUT 1 terminal.

5 CNECTIS C-mount lens VCL-08YM *IR cut filter can be screwed out. Camera Cable CCXC-12P02S 05S 10S 25S 12p-12p(SHIELD) Junction Box JB-77 DC12V VIDEO 1 VIDEO 2 HV,VS F1.4 8mm VCL-12YM Dummy glass for adjusing FB(as an option) Camera Adaptor DC-777 AC100V VIDEO 1 HV,VS F1.8 12mm VCL-16Y-M LO-77ERK VCT-37 VCT-75I DC-77RR *VIDEO 2 is not available F1.4 16mm VCL-25Y-M 30ø 0.5, 1.5, 10, 22mm Extension Ring Kit Tripod Attachment MACRO LENS Isolate AC100V VIDEO 1 HV,VS *VIDEO 2 is not available DC12V F1.6 25mm VCL-50Y-M F2.8 50mm 45mm MACRO LENS 50mm MACRO LENS 23" 1" F3.2 45mm F2.8 50mm use 60mm fairiy 100m fairiy 6p-6p Trigger Cable CCXC-6P05 VIDEO (VIDEO 1+VIDEO 2) HV,VS *Can be slotted in DC-77RR. The can be used in serial numbers and later. When the of serial numbers to is used, consult the sales person in charge. REAR SWITCHES & CNECTORS Pin No. 1 EXTERNAL SYNC MODE HDVD VS 12P MULTI INTERNAL SYNC MODE Pin No. EXTERNAL SYNC MODE INTERNAL HDVD VS SYNC MODE 7 VD IN VS IN VD OUT 12Pin Connector VIDEO OUT2 VIDEO2 VIDEO OUT I IN VIDEO OUT1 VIDEO1 HD(G) HD IN VIDEO OUT MODE 160S N INTER 160S INTERLACE 130S N INTER VIDEO OUT1 HD(G) HD OUT VD(G) VS(G) CD(G) Pin No Pin Connector 6P MULTI SIGNAL CTL INFLD OUT TRIGGER IN WE OUT AI VIDEO OUT OUT * ED N R.R SHUTTER MODE E-DPISHA NORMAL RESTART RESET A F M GAIN MODE AUTO GAIN FIX GAIN MANUAL GAIN MANUAL GAIN CTROL VOLUME CTL INFLD OUT *CTL IN is very useful for monitoring the normal image during E- DPISHA.Serial numbers and later are set to CTL IN at the factory.therefore, a video signal is usually output when pin 1 is connected to ground () during E-DPISHA setting. In the, serial numbers to are set to FLD OUT at the factory.to set serial numbers and later to FLD OUT, the must be changed internally.

6 SPECIFICATIS XC-8500CE Pick up device Optical size Picture elements Video output elements Cell size Signal systems Lens mount Flange back Horizontal frequency Vertical frequency Sync system External sync system Video out modes Horizontal resolution Vertical resolution SN ratio Sensitivity Minimum sensitivity Power requirementsconsumption Normal (Frame) E-DPISHA Normal-speed(Frame) High-speed(Frame) Low-speed(Frame) External control(frame) External trigger Gamma Gain DimensionsWeight Temperture on performance Operating temp.mois. Storage temp.mois. Vibration resistance Shock resistans MTBFRegulations 659(H) x 494(V) 646(H) x 485(V) 9.9(H) x 9.9(V)µm EIAVGA kHz 59.94Hz XC-8500CE Interline transfer Hyper HAD CCD 12-inch format(6.4 x 4.8mm) 782(H) x 582(V) 767(H) x 575(V) 8.3(H) x 8.3(V)µm CCIRSVGA C-mount mm kHz 50Hz InternalExternal(auto) HDVD(4.0Vp-p).VS or SYNC(0.3Vp-p)Frequency deviation±1% 1.0Vp-p sync negative 75 2 I:Interlace(160sec) :Non Interlace(160sec) 1N:Non Interlace(130sec) 500TV lines 485TV lines 60dB(200kHz~4.2MHz) 2 I:Interlace(150sec) :Non Interlace(150sec) 1N:Non Interlace(125sec) 580TV lines 575TV lines 58dB(200kHz~5.0MHz) 400 lx F4 3lx F1.4 AGC:(with IR cut filter) DC+10.5~15V2.5W off ,000.12,000.14, ,000sec,flickerless 11,000.12,000.14,000.16,000.18, ,000sec, 111,000sec( only) Another speed can be selected by internal SW. 110,000~1100,000sec oo~approx.160sec oo~approx.150sec oo~160~110,000sec oo~150~110,000sec Polarity+-,trigger width(2µ~10m sec),input impedance 10k ( =0.45)OFF( =1)(Internal switch selection) AGC(0~18dB).FIX(0dB).Manual(0~18dB factory setting:fixed same level) 44 x 44 x 70mm190g 0~40 C -5~45 C25~80% -25~60 C20~90% 7G(11~200Hz)3directions 70G 83,400 hrs UL FCC CE marking Video inputoutput signal 12PIN(VIDEO1,2, 1.0Vp-p, 75 ),D-sub 15POUT(VGASVGA),12POUT(1.0Vp-p,75 ) External inputoutput signal TRIG IN(High,+2.0~5.0Vp-p),WEN OUT(High,5.0Vp-p),CTL OUT Sync inputoutput signal HDVD IN(2.0~5.0Vp-p,75 )HDVD OUT(4.0~5.0Vp-p,High) Scanning conversion (EIAVGACCIR),XC-8500CE(CCIRSVGAEIA) High-Rate scan x1.5, 2, 3, 4 Sports mode 1100sec x 2 (XC-8500CE only) control E-DPISHA:oo~1100,000sec(Low-speed,Middle-speed,Normal-speed,High-speed,Trigger through) Power requirementsconsumption DC+10.5~+15V2.4W DimentionsWeight 135.4(W) x 30(H) x 69(D)mm295g Sony Electronics Inc. ISP(USA) Itasca Office 1200 N. Arlington Heights Rd, MD-1118 Itasca, IL (TEL: ) (FAX: ) San Jose Office 3300 Zanker Rd, MS-SJ2B1 San Jose, CA (TEL: ) (FAX: ) Park Ridge Office 1 Sony Drive Park Ridge, NJ (TEL: ) (FAX: ) Sony of Canada Ltd.(CANADA) 411 Gordon Baker Road, Willowdale, Ontario M2H 2S6 (TEL: ) (FAX: ) Sony Broadcast & Professional Europe HQ 15, rue Floreal Paris Cedex 17, France (TEL: ) (FAX: ) Germany Hugo-Eckener-Str. 20, Koln (TEL: ) (FAX: ) France 15, rue Floreal Paris Cedex 17 (TEL: ) (FAX: ) UK The Heights, Brooklands, Weybridge, Surrey KT13 0XW (TEL: ) (FAX: ) Nordic Per Albin Hanssons vag 20 S Malmo Sweden (TEL: ) (FAX: ) Italy Via Galileo Galilei 40 I Cinisello Balsamo, Milano (TEL: ) (FAX: ) Sony Corp. ISC Co. APP Sales Dpt.(JAPAN) (FAX: ) Design and specifications are subject to change without notice. 97D