M10 TECHNICAL FEATURES

Transcription

1 M10 TECHNICL FETURES 04/2016

2 DESK SINGLE DESK DOULE DESK RETURN DESK ench DESK MEETING TLE For anti-electrostatic solutions, please ask us the conditions. Sliding top Optional Top Melamine Glass Steal beams 60 x 30 x 1,5 mm Leg frame Single Floor support Leveller or optional height adjustment Forma 5 M10 02

3 ENCH DESK Cable management Sliding top Top access Grommet Screen 19 mm melamine 6 mm laminated glass 16 mm upholstered Technical screen Uneven screen Top 30 mm melamine Steal beams 60 x 30 x 1,5 mm Sliding top Semi-oval tube leg frame 60 x 30 x 2 mm. 45º angle corner Floor support Leveller or optional height adjustment Forma 5 M10 03

4 COUNTER LOW - HIGH WITH 2 LEGFRMES- HIGH WITH CORNER Top Melamine Top 30 mm melamine Reception counter with inner leg frame Paravent 19 mm melamine 3 mm melamine + glass Low reception counter Forma 5 M10 04

5 MEETING TLES rectangular - SQURE - ROUND Top 30 mm melamine Top access Optional Floor support Leveller Semi-oval tube legs 60 x 30 x 2 mm Forma 5 M10 05

6 ELEMENT DESCRIPTION ORD Melamine (1) 1,2-2 mm Melamine (1) 1,2 mm Melamine + glass 3 mm EDGE WIDTH 19 mm ORD 30 mm ORD 30 mm 10 mm 19 mm 1,2 mm (1) Drawer front Cabinet top, lateral, floor and shelf Glass 5 mm 2 mm (1) Desk top 5 mm Top MELMINE: 30 mm thick melamine particle board, with 2 mm thick thermofused edges around the perimeter. Drilled underneath to insert the nuts and assemble the elements. Finishes: off-white, oak and walnut. GLSS: 10 mm thick laminated black or white glass and an inner butyral sheet. Polished edges and rounded corners. Fixed to the structure by silicone suckers. Melamine Translucent glass LEGFRME 60 x 30 x 2 mm thick semi-oval tube. 100 micron layer epoxy paint. Legs meet crossbar. The leg frame has a trestle shape. 2 polypropylene ends help keep the desk straight on irregular surfaces. The program provides several legframes: SINGLE: for 80 and 56 cm overviews. DOULE: for 1660 and 1170 mm overviews DD-ON: for 1660 mm overviews. This legframe allows bench desks configurations, as the support remains under the desk. Height adjustment available. beam 60 x 30 x 1,5 mm beam as desk top support and100 micron epoxy paint layer. Legframe HEIGHT DJUSTMENT Leveller: floor support with levellers to keep the desk surface straight (2cm). Leg frame with height adjustment: ( mm) with 60 x 30 x 2 mm semioval tube, with a micron layer epoxy paint. Legs meet crossbar with a miter. Leg shapes as trestle. 2 polypropylene ends help keep the desk straight on irregular surfaces. It is available for single desk with legframe supports. MODESTY PNEL MELMINE: 19 mm thick melamine particle board with 1.2 mm thick thermofused edges around the perimeter, fixed to the structure by specific fittings hidden below the desk. METL: 1.5 mm thick textured steel sheet panel with epoxy paint finish, polymerized at 220ºC. The assembly system includes fittings to facilitate it all. It hangs from the front beam. Levellers Height adjustment Melamine Metal Forma 5 M10 06

7 ELEMENT DESCRIPTION SCREEN MELMINE: 19 mm thick particle board with 1.2 mm thermofused edges around the perimeter. Fixed to the structure with specific fittings hidden below the desk. GLSS: 6 mm (3+3 mm) laminated glass with inner butyral sheet. Polished edges and rounded corners. Fixed to the structure by specific fittings hidden below the desk. Melamine Upholstered upholstered: 16 mm thick particle board base with both sides upholstered. Sewings at laterals. Share fittings with the rest of the screens. Glass Technical technical: Simple technical monorail or multirail. These screens may be melaminated or upholstered. Technical screens allow rails by placing trays and accessories that increase the functionality of the screen. Simple screens. vailable in melamine, glass or upholstered, may be placed in the front or the lateral of single desks and in the front side of each position in benchs overviews between two desks in 1 or 2 tops. UNEVEN TECHNICL SCREENS 3 mm steel sheet beam, with inverted V shape, supports 4 upholstered clothes, based on 5 mm thick fiber boards and later on upholstered with Forma 5 Group 1 fabrics. The clothes go 280 and 170 mm over the desk top, combining the different heights, shapes and colours. CLE MNGEMENT 1. s for the accessibility, we highlight two possibilities: Top access: aluminium extrusion piece which gives access to the installation through a rectangular area of 360 x 120 mm in the desk. You have several options for placing the desk if necessary. Same finishes as the framework. Desk grommets: 94 x 94 mm square with a 80 mm desk space, with several position possibilities, offering a perfect solution for sedentarial needs. S material. 2. s for the distribution, we highlight: Single trays made of polypropylene or metal. They are associable thus joining several of them, cables may be conducted through multiple workstations. Its main function is to support the terminal interconnections. The new generation of cable management trays provides, by a sliding system hanging from the beams, an easier access to the installation because trays may be took down, improving the visibility and manipulation. Very useful for single desks. Forma 5 M10 07

8 CONFIGURTIONS ND DIMENSIONS DESKS ND RETURN DESKS DESK x 200 x x x x 80 DESK WITH MM SUPPORT PEDESTL x DESK WITH MM HIGH DESK PEDESTL x 120 x 80 RETURN DESKS x 100 x x 56 DD-ON DESKS FROM LEGFRME DESK x 120 x 80 DESK WITH MM SUPPORT PEDESTL x DESK WITH MM DESK HIGH PEDESTLS x 120 x 80 DD-ON DESKS FROM PEDESTLS DESK x 120 x 80 DESK WITH MM SUPPORT PEDESTL x DESK WITH MM DESK HIGH PEDESTL x 120 x 80 h: 74 cm Forma 5 M10 08

9 CONFIGURTIONS ND DIMENSIONS GLSS OVERVIEWS DESK x 200 x 90 RETURN DESK LEG FRME ND EM SUPPORT x 100 X X X 56 MEETING TLES ø ROUND Ø 110 RECTNGULR x 240 x x x x x x x x 166 SQURE x 118 x 120 ENCH DESKS ENCH DESK SUPPORTED Y LEGFRME x / 180 x 166/ x 166/ x 166/ x 166/80 ENCH DESK SUPPORTED Y MM WIDE PEDESTL x / 180 x 166/ x 166/ x 166/80 ENCH DESK SUPPORTED Y HIGH DESK PEDESTL x / 180 x 166/ x 166/ x 166/ x 166/80 h: 74 cm Forma 5 M10 09

10 CONFIGURTIONS ND DIMENSIONS ENCHS DESKS ENCH DESK SUPPORTED Y MM WIDE PEDESTL / x / 360/180 x 166/80 320/160 x 166/80 280/140 x 166/80 ENCH DESK SUPPORTED Y HIGH DESK PEDESTL / x / 360/180 x 166/80 320/160 x 166/80 280/140 x 166/80 240/120 x 166x80 240/120 x 166/80 ENCH DESKS ND DD-ON DESKS ENCH DESK SUPPORTED Y FRMELEGS x / 180 x 160/ x 160/ x 160/ x 160/80 ENCH DESK SUPPORTED Y MM PEDESTLS x / 180 x 166/ x 166/ x 166/80 ENCH DESK SUPPORTED Y DESK HIGH PEDESTLS x / 180 x 166/ x 166/ x 166/ x 166/80 h: 74 cm Forma 5 M10 10

11 CONFIGURTIONS ND DIMENSIONS COUNTERS LOW RECEPTION COUNTER / x h: 74 cm 190/30 x /30 x HIGH RECEPTION COUNTER / x h: 74/110 cm 160/20 x /20 x HIGH CORNER RECEPTION COUNTER / x h: 74/110 cm 190/30 x /30 x 95 COUNTERS, DD-ON COUNTERS FINL DD-ON LOW RECEPTION COUNTER / x h: 74 cm 190/30 x /30 x FINL DD-ON HIGH RECEPTION COUNTER / x h: 74/110 cm 160/20 x /20 x FINL DD-ON HIGH CORNER RECEPTION COUNTER / x h: 74/110 cm 190/30 x /30 x 95 Forma 5 M10 11

12 CONFIGURTIONS ND DIMENSIONS DESK SUPPORT CINET OVERVIEWS 180/ SINGLE DESK x 180 x x /160 DOULE DESK / x 360/ 320/ / /160 ENCH DESK FOR 2 x / 180 x 166/ x 166/ x 140/ x 140/ /160 ENCH DESK FOR 4 / x / 360/180 x 166/80 320/160 x 166/80 180/ h: 74 cm Forma 5 M10 12

13 PRODUCT ENVIRONMENTL STTEMENT Life Cycle nalysis M10 Program RW MTERILS Raw Material Kg % Steel 30,67 Kg 48% Plastic 0,64 Kg 1% Wood 32,6 Kg 59% % Recycled material= 56% % Recyclable materials= 99% Ecodesign Results reached during the life cycle stages MTERILS Wood 70% of the wood material is recycled, has PEFC/FSC and complies within the E1 standard. Steel 15%-99% recycled material. Plastic 30%-40% recycled material. Paintings Podwer painting without COV emissions Packings 100% recyclable with inks with no solvents. Forma 5 M10 13

14 PRODUCT ENVIRONMENTL STTEMENT PRODUCTION Raw materials use optimization oard, upholstery and steel tubes cut. Renewable energies use reducing the CO2 emissions. (Photovoltaic pannels) Energy saving measures in all production process COV global emission reduction of the production processes by 70%. Podwer painting ecovery of 93% of the non deposited painting Glue removal from the upholstery The facilities have an internal sewage for liquid waste. Green points at the factory 100% waste recycling at production process ans dangerous waste special treatment. TRNSPORT Cardboard use opmitization of the packings Cardboard and packing materials use reduction Flat packings and small bulks to optimize the space. Solid waste compacter which reduces transport and emissions. Light volumes and weights Transport fleet renewal reducing by 28% the fuel consumption. Suppliers area reduction Local market power and less pollution at transport. USE Easy maintenance and cleaning without solvents. Forma 5 guarantee The highest quality for materials to provide a 10 year average life of the product. Useful life optimization of the product due to a standarized and modular design. The boards with no E1 particle emission. END LIFE Easy unpacking for the recyclability or compound reuse. Piece standarization for the use. Recycled materials used for products (% recyclability): Wood is 100% recyclable. Steel is 100% recyclable. With no air or water pollution while removing waste. Returnable, recyclable and reusable packing Product recyclability 99% Forma 5 M10 14

15 MINTENNCE ND CLENING GUIDE MELMINE PIECES metl PIECES Rub the dirty spots with a wet cloth with PH neutral soap. 1 Rub the dirty spots with a wet cloth with PH neutral soap. PLSTIC PIECES Rub the dirty spots with a wet cloth with PH neutral soap. 2 Polished aluminium pieces can have their polish bak by covering and rubbing them with a dry cottom cloth. glass pieces Rub the dirty spots with a wet cloth with PH neutral soap. Do not use abrasive products in any case. LEGL TERMS CERTIFICDOS Forma 5 certifies that M10 programme has passed tests conducted in the laboratory of internal Quality Control and TECNLI Research Technology Center, obtaining satisfactory results in the following tests: UNE EN norm. Office furniture. Desks. Part 1: Dimensions. UNE EN norm. Office furniture. Desks. Part 2: Security mechanism requirements. UNE EN norm. Office furniture. Desks. Part 3: Testing methods to determine the stability and mechanic resistence of the structure. Developed by Mario ruiz Forma 5 M10 15