Getting Started Guide FLIR Bxxx series FLIR Txxx series

Transcription

1 Getting Started Guide FLIR Bxxx series FLIR Txxx series

2 4 2011, FLIR Systems, Inc. All rights reserved worldwide.

3 Rear view A14 Hand strap. Front view A1 Touch screen LCD. A2 Cover for the SD memory card slot. A3 Zoom button. B1 Laser pointer button: Push to acti- A4 Stylus pen. Note: Push down the vate the laser pointer. stylus pen firmly into its holder when B2 Preview/Save button: Push and hold not in use. down the Preview/Save button for A5 Camera button: Switch between the more than 1 second to save an infrared camera and the digital cam- image. Push briefly to preview an era. image and link additional anno- A6 Joystick: Move up/down or left/right tations to the image. to navigate on menus, in dialog B3 Focus button: Move left/right to boxes, and in the image archive. manually focus the camera. Push to Push to confirm choices. autofocus the camera. A7 A/M button: Push to switch between B4 Attachment point for the neck strap. automatic and manual adjustment B5 Video lamp. modes. Push and hold down for B6 Digital camera lens. more than 1 second to perform a B7 Release button for additional infranon-uniformity correction. red lenses. A8 Measure button: Push to dis- B8 Laser pointer. play/hide measurement tools. B9 Infrared lens. A9 Info button: Push to display/hide B10 Lens cap for the infrared lens. image information on the screen. A10 Setup button: Push to display/hide the setup menu. A11 Archive button: Push to open/close the image gallery. A12 Mode button: Push to display/hide the mode selector. A13 On/Off button: Push to turn on/turn off the camera. 2011, FLIR Systems, Inc. All rights reserved worldwide. 19

4 Connectors Choosing palette and temperature range: To change the color palette and the object temperature range, push the Setup button (A10) and use the joystick. Focusing the camera: To focus manually, move the Focus button (B3) left/right. To autofocus the camera, push and release the center of the Focus button (B3). Auto-adjusting the image: To manually adjust the image, push the A/M button (A7) to display M in the top right corner of the screen, then use the joystick. C1 To connect a headset to the camera To automatically adjust the image, to record and listen to voice annopush the A/M button (A7) to display A. tations, use a headset cable and this socket. Choosing mode: Push the Mode button C2 To connect a video monitor to the (A12) to choose between various modes camera, use a CVBS (composite of operation: video) cable and this socket. Camera mode:this is the most com- C3 To connect a computer to the cammonly used operation mode of the era to move images and files to and camera. You select this mode to save from the camera, use a USB Mini-B an infrared image to the SD memory cable and this socket. card. If you push the Preview/Save C4 To connect an external USB device button, the documentation toolbar will to the camera, use a USB-A cable be displayed. and this socket. Video mode: If you select this mode, Procedures you can record video clips with the camera. You start and stop the re- Changing the language: To change the cording by pushing the Preview/Save language, do the following: button. 1. Push the Setup button (A10). Simultaneous mode: If you select this 2. Move the joystick (A6) right to go to mode, and push and hold down the the Regional tab. Preview/Save button (B2) for more 3. Move the joystick (A6) down to select than 1 second, the camera will auto- Language. matically save a digital photo at the 4. Push the joystick (A6), then move the same time as it saves the infrared joystick up/down to select your image. language. Program mode: If you select this 5. Push the joystick (A6) to confirm your mode, you can periodically save imchoice. ages at a specified time interval. 6. Push the Setup button (A10) to leave Panorama mode: If you select this the set-up mode. mode, you can create large images by stitching normal images together , FLIR Systems, Inc. All rights reserved worldwide.

5 To save an image: Push and hold down the Preview/Save button (B2) for more than 1 second to save an image. Push briefly to preview an image and link additional annotations to the image. To keep in mind: When closing a menu, use the same button that you used to open it. Blank objects may appear as warm or cold in the camera due to reflections of other objects. Avoid direct sunlight on the details that you are inspecting. Various types of faults, such as those in a building s construction, may result in the same type of infrared images. Correctly analyzing an infrared image requires professional knowledge about the application. Note: See the documentation on the CD- ROM for further information on camera functionality, applications, the theory of thermography, and thermographic measurement techniques. 2011, FLIR Systems, Inc. All rights reserved worldwide. 21