est decorative hardware bath hardware functional hardware displays

Transcription

1 celebrating 80 years est decorative hardware bath hardware functional hardware displays

2 celebrating 80 years est We believe that our catalog is one of our most important and comprehensive ways we communicate with you. In 2008 Amerock surveyed those of you who use our catalog frequently, seeking your input regarding how we can enhance your overall experience with Amerock and our products. We listened to what you had to say, and as a result, we are excited to launch the new and improved 2009 Amerock product catalog. Here are just some of the upgrades that we have made based on your valuable input. Enhanced Shopability and Readability The new catalog features a crisp new look that allowed us to enlarge our individual product images, detailing highlights of our designs and textures. We have increased the font size for enhanced readability. What s New You asked us to highlight what s new, and we responded by featuring our new collections in the beginning of the catalog highlighting our largest launch-to-date including five new product collections, three new trend right finishes and size extensions on several of our existing collections. We continue to highlight our new products as the introduction to each section. Improved Selection Tools Improving the ability to select a finish was important to you as well, each section includes a visual finish reference and listing of every single finish available within that product category. The new format also offers a consistent experience from section to section, with easy-to-navigate call outs to matching and coordinating product. We hope that our new Amerock catalog inspires you, but more importantly we hope you can easily find the products you need when you need them. We d appreciate your feedback, please us at Amerock.Relations@Amerock.com to fill out a short survey. Enjoy the experience. Amerock, your style partner since TM

3 contents Decorative Hardware Transitional p.16 Allison TM Value Hardware Finish Index p.108 Functional Hardware Finish Index p.158 Product Index Pack Type Information p.234 Decorative Hardware Finish Index p.12 Decorative Hardware p.8 Decorative Hardware Traditional p.46 Decorative Hardware Oversized p.92 Decorative Hardware Allison TM Value Hardware p.106 Functional Hardware p.156 Product Index p.214 Celebrating 80 Years p.6 Decorative Hardware Contemporary p.32 Decorative Hardware Eclectic p.70 Bath Hardware p.148 Displays p.212 Bath Hardware Finish Index p.150

4 Celebrating 80 Years 1929 Reuben and Gedor Aldeen left Rockford s National Lock Company to establish the Aldeen Manufacturing Company. 1930's Introduced the concept of matching cabinet decorative hardware for knobs, pulls, and hinges. Changed its name to The American Cabinet Hardware Company of Rockford. 1940's Amerock helps out in the war effort by manufacturing items needed by the military. 1950's Purchased 94 acres for a new factory in Rockford, IL and built a plant in Canada. Designed, patented and manufactured the self closing cabinet door hinge. 1960's Amerock designed, patented, and manufactured the demountable hinge program. 1970's Amerock began using a mobile merchandising van. Introduced bath hardware. Joined the Anchor Hocking Group. 1980's Designed and patented a new kitchen storage accessory program as well as the first American made frame concealed hinge program. Acquired by Newell Co. 1990's Grew and expanded sales during a period of record growth. Began focusing on larger retail customers Today Galleria hardware line as well as new Bath hardware are launched. A new mobile showroom is created. Amerock relocates from Rockford to Columbia, MD then to Huntersville, NC Amerock 7

5 Decorative Hardware What's New p.10 Finish Index p.12 Transitional p.16 Contemporary p.32 Traditional p.46 Eclectic p.70 Oversized p.92 Allison TM Value Hardware p.106

6 WHAT'S NEW WHAT'S NEW highland ridge Collection gilded bronze finish Cottage-chic meets a New England twist with Amerock s Highland Ridge collection. Period-accurate touches such as cabinet latches are designed to add quality, refined beauty and function, partnered with oversized backplates, exposed screws on the cup pull and latches to create a sense of contemporary class. 36 new SKUs in three finishes including our new Dark Oiled Bronze and 12 sizes offer casual opulence with lasting character. Amerock extends its industry leading finishes with the introduction of Gilded Bronze, a beautiful new warm, golden finish designed to coordinate with the latest in kitchen cabinet, appliances and lighting designs and color palettes. This finish will be available on the new Revitalize collection. This finish can be located on page 48. This collection can be located on page 18. dark oiled bronze finish Blackrock collection Introducing Amerock Dark Oiled Bronze finish, a deep and rich finish designed to coordinate with premium, high end plumbing fixtures and hardware. This finish will be available in the new Highland Ridge collection as well as the popular Lattice TM Collection. This finish can be located on pages 18 and 49. The Blackrock collection from Amerock offers sleek simplicity with a hardy hand. This new eclectic line boasts standard and oversized knobs in round and square forms, and features a new pendant knob that offers a unique patented design specifically quality-engineered to stop before hitting your cabinet, preventing surface damage. With 12 unique sizes and three distinct finishes, including our new Black Bronze, Blackrock fits comfortably anywhere from a utilitarian galley kitchen to a contemporary cottage kitchen. This collection can be located on page 72. riva Collection Black Bronze finish A dramatic look for the crisply-tailored modern home, Riva emphasizes formality of line and boasts minimally adorned surfaces. Bold contrasts in materials and colors, exotic veneers and long unbroken lines blend contemporary indulgences with a touch of formal elegance to create this urban inspired style. With eight sizes and two finishes, Riva creates a minimalist appearance achieved through stand-out design. Introducing Amerock Black Bronze finish, a strong, rugged and masculine finish designed to coordinate with the latest in kitchen cabinet designs and color palettes. This finish will be available on the new Blackrock collection. This finish can be located on page 72. This collection can be located on page 34. Revitalize Collection allison TM value hardware collection With a renewed interest in classic design elements, the Revitalize collection from Amerock focuses on function and a revived spirit of new traditionalism. A blended medley of elements and styles, Revitalize enables creative expression with three coordinating knobs, 12 unique sizes and three distinct finishes including the new Gilded Bronze. With 30 new SKUs and patented designs you can create a fresh look of comfortable modern living. Amerock is introducing the launch of 36 new skus, 12 size extensions and applying its best selling finishes to the Allison TM Value Hardware collection. The new product assortment will add additional depth and breadth to this collection. This collection can be located on page 114. This collection can be located on page DECORATIVE hardware what's new Amerock 11

7 Silver Tones GOLD Tones 26 PN SN 26D G9 R1 R2 R3 Polished Chrome Polished Nickel Satin Nickel (Matte) Brushed Chrome Sterling Nickel Regency Brass Weathered Brass Rustic Brass RUSTIC Tones SF SS AA CP Satin Nickel Stainless Finish Stainless Steel Anodized Aluminum Champagne VS RIN HB HBZ WC Viridian Slate Hammered Iron Hammered Black Hammered Bronze Weathered Copper AN AP WN WNC Antique Nickel Aged Pewter Weathered Nickel Weathered Nickel Copper GOLD Tones RBZ Rustic Bronze ART Antique Rust DARK Tones 3 MBB GB 074 EB Polished Brass Matte Brushed Bronze Gilded Bronze Brushed Brass Elegant Brass WI WID RB ORB DOB Wrought Iron Wrought Iron Dark Roman Bronze Oil-Rubbed Bronze Dark Oiled Bronze DBS AE BB 077 Distressed Brass Antique Brass Burnished Brass Burnished Brass GPH PWT SBK BN Graphite Pewter Silvered Black Black Nickel 12 DECORATIVE hardware FINISH INDEX Amerock 13

8 dark Tones COORDINATING BATH HARDWARE 26 PN SS ORB Arrondi TM Clarendon TM Markham TM BNB BBR FB Saybrook TM Black Nickel (Solid Brass) Black Bronze Flat Black Saybrook Classic TM COLORS COORDINATING FUNCTIONAL HARDWARE CP G9 M26 3 BNL AE BB M PB R3 SB AC HBZ RBZ Decorative Hinges 30 W A AM DW BN CB DAE FB ORB PWT WI A BK W W3 White White Almond Almond Distressed Cream Decorative Hinges DAW Distressed Antique White DG Distressed Green DN Distressed Blue DB Distressed Brown NBZ Black Celebrating Our People... Stephen Smith VP/GM, Amerock Two-toned Q: We re celebrating 80 years, what will be the keys to success for our next 80? CS Crystal CBB Acrylic C Clear Glass / Satin Nickel AORB Amber Glass / Oil-Rubbed Bronze CSG Crystal / Satin Nickel A: "The keys to success for our next 80 years start with the people who comprise the company and seek to carry forward the heritage that our founders created. Having great people who are committed to shared success makes all the difference. Driven by a strong sense of purpose, we will continue to bring meaningful innovation in style and design to the category, creating more value for our customers while building a brand that matters to our consumers." BC 26PB CCB GPT Brass / Chrome Polished Chrome / Brass Brushed Chrome / Brass Pewter / Satin Nickel 14 DECORATIVE hardware FINISH INDEX Amerock 15

9 Transitional Embracing the comfort of traditional design with the stylish looks of contemporary style. Transitional design focuses on the simple yet sophisticated Amerock 17

10 HIGHLAND RIDGE WESTERLY TM PN AP DOB PN 5" length GPH mm ctr PN* PN* PN* PN PN PN PN PN PN PN PN PN AP* AP* AP* AP AP AP AP AP AP AP AP AP Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Backplate 5" Pull 160mm Cup Pull 3.5" Latch 1 3/5" Knob 28mm Rectangular Knob 35mm Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Backplate 5" Pull 160mm Cup Pull 3.5" Latch 1 3/5" Knob 28mm Rectangular Knob 35mm PN 160mm ctr PN 128mm ctr PN * * GPH* GPH* GPH GPH GPH GPH GPH GPH Appliance Pull* 18" Appliance Pull* 12" Pull 160mm Knob 1 3/16" T-Knob 34mm Appliance Pull* 18" Appliance Pull* 12" Pull 160mm Knob 1 3/16" T-Knob 34mm * Appliance pull images are located on page mm ctr DOB* DOB* DOB* DOB DOB DOB DOB DOB DOB DOB DOB DOB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Backplate 5" Pull 160mm Cup Pull 3.5" Latch 1 3/5" Knob 28mm Rectangular Knob 35mm PN PN 3.5" ctr /16" dia. *Appliance pull images are located on page mm length PN 1 3/5" length PN 28mm dia PN 35mm length 18 Decorative Hardware Transitional Amerock 19

11 ROCHDALE TM KANE TM GPH GPH WN ORB 160mm ctr WN 160mm ctr * * GPH* GPH* GPH GPH GPH GPH GPH GPH GPH Appliance Pull* 18" Appliance Pull* 12" Pull 160mm Cup Cup Appliance Pull* 18" Appliance Pull* 12" Pull 160mm Cup Cup *Appliance pull images are located on page GPH 128mm ctr GPH GPH * * * * WN* WN* WN* WN WN WN WN WN WN* WN Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Cup Oversized Knob* 1 4/7" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Cup Oversized Knob* 1 4/7" WN 128mm ctr WN WN GPH ORB* ORB* ORB* ORB ORB ORB ORB ORB ORB* ORB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Cup Oversized Knob* 1 4/7" WN GPH * Appliance pull and oversized knob images are located on page WN 1 4/7" dia GPH WN 20 Decorative Hardware Transitional Amerock 21

12 inspirations TM inspirations TM WN R2 WC ART mm ctr mm ctr. WN ART WID RB WID RB ORB FB ORB FB mm ctr mm ctr * * WN* 1589-WN 1588-WN 1587-WN 1590-WN WN* 1586-WN 4258-WN 1590-R R R WC 1586-WC 4258-WC Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" Knob 1 3/16" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" Knob 1 3/16" Knob 1 3/16" Knob 1 3/16" /4" dia * 1787-* * * WN 1585-WN 1584-ART 1585-ART 1788-WID* 1787-WID* WID* 1786-WID 1785-WID 1784-WID 1584-WID WID* 1585-WID Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" ART 1586-ART 1584-RB 1585-RB /4" dia WID 1586-WID 4258-WID 1586-RB ORB* 1589-ORB 1588-ORB 1587-ORB 1590-ORB ORB* 1586-ORB FB* 1589-FB 1588-FB 1587-FB 1590-FB FB* 1586-FB Knob 1 3/16" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" /8" dia /16" dia ORB* 1787-ORB* ORB* 1786-ORB 1785-ORB 1784-ORB 1584-ORB ORB* 1585-ORB 1584-FB 1585-FB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 3/4" * Appliance pull and oversized knob images are located on page * Appliance pull and oversized knob images are located on page Decorative Hardware Transitional Amerock 23

13 inspirations TM Essential'Z TM WID ORB FB 1592-ORB SN AN WNC WNC 128mm ctr Cup Finger Pull 1 7/8" SN SN Knob 40mm 1592-WID 1592-ORB 1593-ORB 1592-FB 1593-FB Cup Cup Finger Pull 1 7/8" Cup Finger Pull 1 7/8" 1593-ORB 1 7/8" length AN AN WNC WNC Knob 40mm Knob 40mm WNC 40mm dia. Essential'Z TM POLARA TM SN SS AN WNC MBB AN 40mm ctr. AP SBK AP SN SS Knob 40mm Knob 40mm AP* AP AP Appliance Pull* 12" Square Knob 24mm AN WNC MBB Knob 40mm Knob 40mm Knob 40mm SBK* SBK SBK Appliance Pull* 12" Square Knob 24mm *Appliance pull images are located on page AP 24mm dia. 24 Decorative Hardware Transitional Amerock 25

14 PORTER TM BAR PULLS WN ART ORB WN G9 SS ORB ORB 256mm ctr WN WN ART ART ORB ORB WN 19541CS-G CS-G CS-G SS* SS* SS* SS* SS* SS* SS* SS* SS SS SS SS SS Pull* 768mm Pull* 640mm Pull* 544mm Pull* 480mm Appliance Pull* 18" Pull* 416mm Pull* 320mm Appliance Pull* 12" Pull 256mm Pull 192mm ORB 192mm ctr ORB 128mm ctr. WN WNC ART WN WN Square Knob 1 1/8" Square Knob 1 1/8" WNC 1 1/8" length WNC ORB* ORB* ORB* ORB* ORB* ORB* ORB* ORB* ORB ORB ORB ORB ORB Pull* 768mm Pull* 640mm Pull* 544mm Pull* 480mm Appliance Pull* 18" Pull* 416mm Pull* 320mm Appliance Pull* 12" Pull 256mm Pull 192mm ORB ORB WNC WNC Square Knob 1 1/8" Stainless Steel items can be seen on page 35. *Appliance pull and Oversized images are located on page ART ART Square Knob 1 1/8" 26 Decorative Hardware Transitional Amerock 27

15 CROSLEY TM RUSTIC FINISHES ORB PWT ORB R1 HB HBZ R Knob 1" ORB R HB ORB ORB ORB Knob 1" HBZ PWT PWT PWT Knob 1" ORB 1" dia. Essential'Z TM COLORS ART ORB 9365-ORB 64mm ctr. NBZ 3621-NBZ 4" ctr ART Cup Pull 64mm Cup Pull 64mm 3621-NBZ 3623-NBZ 3620-NBZ Pull 4" Knob 13/16" Knob 1 7/16" 9365-ORB Cup Pull 64mm 3623-NBZ 13/16" dia NBZ 1 7/16" dia. 28 Decorative Hardware Transitional Amerock 29

16 COLOUR WASHED CERAMICS CERAMICS W A DW DAW DG 30 W A AM CR 1321-DW 1 3/8" dia /16" dia. DN DB CW W Knob 1 5/16" 1321-A 1324-W 1320-W 1324-W 1 3/8" dia DW 1326-A 1321-DAW 725A-AM 1321-DG 725A-CR 1321-DN 1321-DB 725A-CW W 1 3/8" dia. W DW DAW DG DN 1325-DW 1 3/8" dia A 1 3/8" dia. DB 1325-W 725A-AM 1 3/8" dia DW 1325-DAW 1325-DG 1325-DN 1325-DB 725A-CW1 1 3/8" dia. 30 Decorative Hardware Transitional Amerock 31

17 Contemporary Characterized by clean lines, polished surfaces and asymmetry, contemporary style captures neutral elements and bold color with a focus on the basics of line, shape and form Amerock 33

18 RIVA Bar pulls GPH mm ctr. G9 SS ORB SS 256mm ctr * * * GPH* GPH* GPH* GPH GPH GPH GPH GPH Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Knob 1 1/7" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Knob 1 1/7" mm ctr CS-G CS-G CS-G SS* SS* SS* SS* SS* SS* SS* SS* SS SS SS SS SS Pull* 768mm Pull* 640mm Pull* 544mm Pull* 480mm Appliance Pull* 18" Pull* 416mm Pull* 320mm Appliance Pull* 12" Pull 256mm Pull 192mm SS 192mm ctr SS 128mm ctr. * Appliance pull images are located on page 99. Celebrating Our People... Megan Roe Industrial Designer Q: What have been some of your design influences? /7" length ORB* ORB* ORB* ORB* ORB* ORB* ORB* ORB* ORB ORB ORB ORB ORB Pull* 768mm Pull* 640mm Pull* 544mm Pull* 480mm Appliance Pull* 18" Pull* 416mm Pull* 320mm Appliance Pull* 12" Pull 256mm Pull 192mm Oil-Rubbed Bronze items can be seen on page 27. *Appliance pull and oversized images are located on page SS SS A: "I'm really inspired by architecture, traveling, photography, design and art history. Two designers I rely on for inspiration are Eva Ziesel and Henry Dreyfuss. Ziesel is very expressive, Dreyfuss is very practical and thoughtful. I love the two sides of design that they represent." 34 Decorative Hardware CONTEMPORARY Amerock 35

19 SONARA CONRAD TM SN AN SN 128mm ctr. ORB SN SN AN AN Knob 31mm Knob 31mm SN 31mm dia ORB ORB ORB ORB T-Knob 38.9mm T-Knob 38.9mm SN SBK SN SN SN Knob 27mm mm length SBK SBK Knob 27mm SN 27mm width Celebrating Our People... Keith Gundling Senior Channel Manager Q: What trends have you been seeing out there that we re responding to with our new products? A: "Consumers are looking for the custom look. the result is a mixing and matching of a variety of sizes and styles within the kitchen." Celebrating Our People... Greg Schmidt Process Engineer Design & Finishing Q: What is your background in finishing? A: "I have over 25 years in metal finishing with steel, aluminum, zinc, stainless steel, brass and bronze. I have run plating, powder coating, painting and anodizing lines." 36 Decorative Hardware CONTEMPORARY Amerock 37

20 stainless steel stainless steel SS 192mm ctr SS 192mm ctr. SS SS SS 160mm ctr SS SS SS SS SS SS SS SS SS SS Pull 192mm Pull 160mm Knob 32mm T-Knob 1 15/16" Knob 1 3/16" T-Knob 2" SS 128mm ctr SS SS SS SS Pull 192mm Pull 64mm SS 128mm ctr SS SS SS 64mm ctr SS CREASED BOW TM SS 32mm dia. 26 AA mm ctr SS 1 15/16" length SS Knob 7/8" Knob 7/8" SS 1 3/16" dia SS 2" length AA AA AA Knob 7/8" /8" length 38 Decorative Hardware CONTEMPORARY Amerock 39

21 Essential'Z TM Essential'Z TM mm ctr. SN SN 160mm ctr Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm mm ctr SN SN Pull 160mm SN * Appliance pull images are located on page SN SS SS 128mm ctr SN SS mm ctr. WN WID WN mm ctr WN WN WN WID WID 40 Decorative Hardware CONTEMPORARY Amerock 41

22 Essential'Z TM Essential'Z TM WN mm ctr mm ctr WN DULCET TM WN mm ctr. 26 AA mm ctr WN WN mm ctr AA AA AA WN WN mm ctr WN 42 Decorative Hardware CONTEMPORARY Amerock 43

23 SLEEK evolutions TM 26 26D D PWT 4422-PWT D D D 4422-PWT 4423-PWT 4420-PWT 4421-PWT T PWT 1 1/4" length PWT 26 26D D 64mm ctr Pull 64mm Knob 2" 4421-PWT D D Pull 64mm Knob 2" BASIC I METALS Pull 64mm Knob 2" D 2" length WN FB Celebrating Our People... Sallie Sloane Human Resources Q: What is the employee culture like at Amerock? WN T-Knob 40mm A: "It s very rewarding for me to work with our associates at Amerock and I enjoy building relationships with all of them. Our people are the key to the success of Amerock they are truly passionate, committed and dedicated to contributing to the success of our company for years to come." 4479-FB 4477-FB 4476-FB T-Knob 40mm mm length 44 Decorative Hardware CONTEMPORARY Amerock 45

24 Traditional Elegant and inviting. Traditional style emphasizes finely crafted details and beautifully adorned accents Amerock 47

25 REVITALIZE LATTICE TM GB ORB GB SN WNC DBS RB DOB 160mm ctr DOB 160mm ctr * * * GB* GB* GB* GB GB GB GB GB GB GB ORB* ORB* ORB* ORB ORB ORB ORB ORB ORB ORB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Knob 1 2/7" Rectangular Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Knob 1 2/7" Rectangular Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Knob 1 2/7" Rectangular GB GB 128mm ctr GB GB SN* SN* SN* SN SN SN SN SN* SN WNC WNC DBS* DBS* DBS* DBS DBS DBS DBS DBS* DBS RB* RB* RB* RB RB RB RB RB* RB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 2/3" Knob 1 1/3" Knob 1 1/3" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 2/3" Knob 1 1/3" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 2/3" Knob 1 1/3" DOB 1 2/3" dia DOB 128mm ctr DOB DOB *Appliance pull images are located on page GB 1 2/7" dia DOB* DOB* DOB* DOB DOB DOB DOB DOB* DOB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 1 2/3" Knob 1 1/3" DOB 1 1/3" dia GB 1 1/4" length * Appliance pull and oversized knob images are located on page Decorative Hardware TraDitional Amerock 49

26 MULHOLLAND TM MULHOLLAND TM R3 ART ORB ORB WN R3 ART 160mm ctr. ORB ORB * * * * R R R ART ART ART ORB* ORB* ORB* ORB ORB ORB ORB ORB* ORB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized T-Knob* 1 1/2" T- T- T- Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized T-Knob* 1 1/2" T ORB 128mm ctr ORB ORB WN WN WN R R R ART ART ART ORB ORB ORB ADVANTAGE I T-Knob 1 7/16" T-Knob 1 7/16" T-Knob 1 7/16" T-Knob 1 7/16" T-Knob 1 7/16" SOLID BRASS ORB 1 7/16" length ORB * Appliance pull and oversized knob images are located on page ORB 1 1/2" length 26 G9 WN B WID 4235-ORB 3" ctr ORB BNB ORB G WN 4235-B 4235-WID 4235-ORB 4235-BNB Cup Cup Cup Cup Cup Cup Cup 50 Decorative Hardware TraDitional Amerock 51

27 MANOR MANOR PN 26 PN WN mm ctr. 26 WN R2 ORB ORB Knob 1" PN PN PN PN* PN * Cup Square Knob 1" Cup Cup Cup Oversized Knob* 1 3/7" Square Knob 1" Cup Cup Cup Oversized Knob* 1 3/7" Square Knob 1" PN PN WN WN R R ORB ORB Knob 1" Knob 1" Knob 1" Knob 1" " length WN WN Cup Square Knob 1" O O74 Cup Square Knob 1" 26 WN R2 RB ORB ORB ORB ORB* ORB Cup Cup Cup Oversized Knob* 1 3/7" Square Knob 1" PN 1 3/7" length ORB * Oversized knob images are located on page PN 1" length * WN WN Knob 1 1/2" Oversized Knob* 2" Knob 1 1/2" Knob 1 1/2" " length R R RB* RB Knob 1 1/2" Oversized Knob* 2" Knob 1 1/2" /2" length ORB ORB* ORB Oversized Knob* 2" Knob 1 1/2" * Oversized knob images are located on page Decorative Hardware TrADitional Amerock 53

28 BRASS & STERLING TRADITIONS BRASS & STERLING TRADITIONS 1314-RB 160mm ctr RB G9 077 ART RB G9 077 ART RB ORB ORB 1313-RB 128mm ctr G G9* 1302-G * 1315-* Appliance Pull* 8" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm 1312-RB 1302-RB 1300-O ART 1300-RB 1300-ORB O77* 1302-O ART Appliance Pull* 8" G9 077 ART ORB 1307-ART 1316-RB* 1315-RB* RB* 1314-RB 1313-RB 1312-RB 1302-RB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm 1307-G ORB* 1315-ORB* ORB* 1314-ORB 1313-ORB 1312-ORB 1302-ORB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm 1307-ART 1307-ORB * Appliance pull images are located on page 102. G /16" dia G9 Knob 1 3/16" 1306-O77 Knob 1 3/16" 54 Decorative Hardware TraDitional Amerock 55

29 VASARI TM Village classics TM SN AN WNC WNC 128mm ctr. WN R2 ART RB ORB WN 160mm ctr. FB SN SN SN AN AN AN WNC WNC WNC Knob 30mm Knob 30mm Knob 30mm WNC 30mm dia WNC WN WN WN WN WN R R R R R ART ART Pull 160mm T-Knob 66mm Knob 34mm Pull 160mm T-Knob 66mm Knob 34mm T-Knob 66mm WN WN THE ANNIVERSARY COLLECTION TM RB RB T-Knob 66mm 26 G9 074 ORB PWT BN 853-G9 1 3/16" dia ORB ORB ORB ORB ORB FB FB FB FB FB Pull 160mm T-Knob 66mm Knob 34mm Pull 160mm T-Knob 66mm Knob 34mm WN 66mm length Knob 1 3/16" WN 34mm dia. 853-G9 Knob 1 3/16" 853-O74 Knob 1 3/16" 853-ORB Knob 1 3/16" 853-PWT Knob 1 3/16" 853-BN Knob 1 3/16" 56 Decorative Hardware TrADitional Amerock 57

30 TRADITIONAL CLASSICS TRADITIONAL CLASSICS WN 3 ORB 772-WN 1 1/2" dia. ORB CS CBB C ORB 772- Knob 1 1/2" AORB 772-WN ORB Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" ORB 734-CS 1 9/16" dia. 733-CS 1 3/16" dia. 734-CS 733-CS 732-CS 731-CS Knob 1 9/16" Knob 1 3/16" Knob 1 3/16" WN 3 AE RBZ CBB 14303CBB C C Knob 1" 732-CS 1 3/8" dia. 731-CS 1 3/16" dia. WI ORB GW NB MB AORB AORB 14303CSG Knob 1" CBB 1 3/8" dia CBB 771-WN AE 771-RBZ 771-WI AORB C 1" dia. 771-ORB 771-GW 771-NB 771-MB 58 Decorative Hardware TraDitional Amerock 59

31 THE ANNIVERSARY COLLECTION TM HINT OF HERITAGE G9 074 ORB PWT BN 854-BN 26 G9 WN PWT 854-G9 884-G9 874-G9 884-BN B 074 R1 R2 WC 2377-PWT 854-O O74 WID ORB PWT 854-ORB 874-PWT 874-BN PWT 854-BN 884-BN 874-BN 2378-G * Oversized Knob* 1 3/8" OpULENCE 1466-WN PWT 2378-B 2378-O O74 26 WN EB ORB WN 2378-R R R PWT R WC 1466-WID WN 1 3/8" dia ORB WN WN EB EB ORB ORB 2378-PWT 2377-PWT 2370-PWT 1466-PWT 1386-PWT * Oversized knob images are located on page Decorative Hardware TraDitional Amerock 61

32 RADIANCE TM EXPRESSIONS TM 26 3 RI 1394-R1 G9 CP 074 R1 ORB 1473-CP R R1 T-Knob 1 1/2" T-Knob 1 1/2" T-Knob 1 1/2" 1396-R1 1 1/2" length PWT 1471-G G CP 1471-CP 1470-CP 1475-CP 1474-CP T-Knob 1 1/2" 1471-CP 1470-CP R R O O O R R R CP 1 3/8" dia R R R ORB 1471-PWT 1470-PWT 1475-PWT 1474-PWT T-Knob 1 1/2" 1474-CP 1 1/2" length PATTERNS Celebrating Our People... Cathy MacKenzie Customer Service Representative 37 Years with Amerock Q: What was your first job at Amerock? A: "My first job at Amerock was in the Packing department 2 nd shift. I had graduated on a Friday and started the following Monday, June 7 th They had just introduced the Carriage House line of Bath Hardware which included the electrical plates and door hardware entry, dead bolt and privacy/passage. It was a great experience to jump into a manufacturing job and work with mostly women of all ages. Boy did I get educated fast." /8" dia. 62 Decorative Hardware TraDitional Amerock 63

33 REFLECTIONS TM DESIGN DETAILS TM 26 G9 3 R R1 G9 R1 PWT 1820-PWT RBZ ART 1383-R G G R R R PWT 1821-PWT 1821-PWT 1 3/8" dia G G R PWT 1382-R R R R R RBZ 1387-ART 1387-R1 PWT 1824-PWT 1825-PWT Square 1825-PWT 1 1/4" length DESIGN DETAILS TM brass & sterling traditions G9 074 G9 077 ORB 1301-G G G G9 Knob 1 1/8" 1303-O O O ORB 1301-ORB Knob 1 1/8" 1308-G9 1 1/8" dia. 64 Decorative Hardware TrADitional Amerock 65

34 TRUE ELEGANCE ADVANTAGE I SOLID BRASS O77 NBZ BC 1957-NBZ 1350-O O O O77 Knob 1/1/4" 1354-O NBZ 1957-BC RUSTIC FINISHES O R1 R1 HB HBZ 1352-O O74 Knob 1/1/4" 1356-O R O O HB HBZ 1353-O WI 077 WI 1353-O O O WI R1 RI R1 66 Decorative Hardware TrADitional Amerock 67

35 BACKPLATES BACKPLATES WN R2 ORB WID WID 4 3/8" length G9 ORB 875-G Backplate 4 3/8" 875-G9 Backplate 3" WN Backplate 4 3/8" 875- Backplate 3" R2 Backplate 4 3/8" 875-ORB Backplate 3" ORB Backplate 4 3/8" WID Backplate 4 3/8" WN ORB WID WID 4 3/8" length Backplate 96mm Backplate 3" WN ORB ORB Backplate 3" Backplate 4 3/8" Backplate 3" WID 26 3 BB WID WID Backplate 4 3/8" Backplate 3" Backplate 3" Backplate 3" BB Backplate 3" G9 885-G9 3 5/8" length G G9 4 5/16" length 885-G9 Backplate 3 5/8" 1304-G9 Backplate 4 5/16" 1304-O77 Backplate 4 5/16" 68 Decorative Hardware TrADitional Amerock 69

36 Eclectic Blending different eras and styles with a single statement the hallmark of eclectic design is that anything goes as long as it goes together Amerock 71

37 BLACKROCK PADMA TM ORB BBR AP DBS VS ART BBR 160mm ctr AP * * * * * Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Pendant 1 5/6" Oversized Square Knob* 1 1/2" Square Knob 1 1/6" Oversized Knob* 1 3/8" Knob 1 1/3" BBR 128mm ctr AP AP DBS DBS VS VS ART ART Knob 33mm Knob 33mm Knob 33mm Knob 33mm Appliance pull images can be seen on page AP 33mm dia ORB* ORB* ORB* ORB ORB ORB ORB ORB ORB* ORB ORB* ORB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Pendant 1 5/6" Oversized Square Knob* 1 1/2" Square Knob 1 1/6" Oversized Knob* 1 3/8" Knob 1 1/3" BBR BBR VASARI TM AN WNC WNC 128mm ctr BBR* BBR* BBR* BBR BBR BBR BBR BBR BBR* BBR BBR* BBR Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Pendant 1 5/6" Oversized Square Knob* 1 1/2" Square Knob 1 1/6" Oversized Knob* 1 3/8" Knob 1 1/3" * Appliance pull and oversized knob images are located on page BBR 1 5/6" length AN AN AN WNC WNC WNC Knob 30mm Knob 30mm WNC 30mm dia WNC BBR 1 1/2" length BBR 1 1/6" length BBR 1 3/8" dia BBR 1 1/3" dia. 72 Decorative Hardware ECLECTIC Amerock 73

38 VASARI TM eydon TM SN AN WNC AN WN WNC ART ORB WNC SN SN SN SN AN AN AN AN AN AN Knob 30mm Knob 30mm Knob 33mm Knob 33mm Knob 30mm AN 30mm dia WN WN WN WNC WNC WNC ART ART ART Knob 1" Knob 1" Knob 1" WNC 1" dia WNC WNC WNC WNC WNC WNC WNC Knob 33mm Knob 33mm Knob 30mm AN ORB ORB ORB Knob 1" ODEON AN 30mm dia. AN WNC DBS WNC 128mm ctr AN AN AN Knob 34mm AN 33mm dia WNC WNC DBS DBS Knob 34mm Knob 34mm WNC 34mm dia. 74 Decorative Hardware ECLECTIC Amerock 75

39 ANGOURI TM SWIRL'Z SN AP VS AP 128mm ctr. WN R2 WC WID ORB 128mm ctr. ORB FB SN SN AP AP VS VS Knob 33mm Knob 33mm Knob 33mm AP 33mm dia * Knob 1 1/8" Oversized Knob* 1 3/4" Knob 1 1/8" 9337-ORB SUNDARA TM WN 9337-WN 9339-WN 9338-WN Knob 1 1/8" Knob 1 1/8" 9339-ORB 1 1/8" length R2 WN R2 WID ORB ORB WC WID 9337-WID 9339-WID 9338-WID Knob 1 1/8" Knob 1 1/8" ORB 1 3/4" dia WN WN R R R WID Square Knob 1 1/8" Square Knob 1 1/8" ORB ORB 9337-ORB 9339-ORB ORB* 9338-ORB 9337-FB 9339-FB 9338-FB Knob 1 1/8" Oversized Knob* 1 3/4" Knob 1 1/8" Knob 1 1/8" Knob 1 1/8" 9338-ORB 1 1/8" dia ORB ORB ORB Square Knob 1 1/8" ORB 1 1/8" length * Oversized knob images are located on page Decorative Hardware ECLECTIC Amerock 77

40 cyprus TM MARSDEN TM 5267-WN G9 WN WID WN EB ORB ORB 5267-G G WN 5266-WN 5267-WID 5266-WID 5266-WN WN WN EB EB ORB ORB Square Knob 1 1/8" Square Knob 1 1/8" Square Knob 1 1/8" ORB 1 1/8" length WN R2 WC WID 5262-WN WN R2 WID WN 5262-WN 5263-WN 5262-R R WC 5263-WC 5263-WN WN WN R R WID WID WN 1 1/4" length 5262-WID 5263-WID Celebrating Our People... Claire Parrish Product Manager Q: From where do you pull the trend information each year? A: "It's actually a grassroots calendarized process that is an internal trend team effort, starting with macro trending to track consumer attitudes, and then focusing in to micro trending where it then ties in relevance to home décor." 78 Decorative Hardware ECLECTIC Amerock 79

41 INSPIRATIONS TM Vineyard TM 1580-WN WN EB R2 WC WN WC WID PWT 4473-WID ORB WID 4443-WN Square Knob 1 1/8" * Oversized Knob* 1 5/7" 1582-WN 4473-WN 4475-WN 4473-WC 4475-WC Square Knob 1 1/8" Square Knob 1 1/8" 4475-WID 1 1/8" length 1580-WN 4443-WN 1582-WN 1583-WN 4444-WN WN* 1581-WN 1580-EB 4443-EB 1582-EB 1583-EB 4444-EB EB* 1581-EB 1580-R R R R WC 4444-WC 1580-ORB 1582-ORB 1583-ORB ORB* 1581-ORB 1580-WID 1582-WID 1583-WID 1581-WID Cup Finger Pull 1 7/8" Knob 1" Oversized Knob* 1 5/7" Cup Finger Pull 1 7/8" Knob 1" Oversized Knob* 1 5/7" Cup Finger Pull 1 7/8" Knob 1" Cup Finger Pull 1 7/8" Oversized Knob* 1 5/7" Cup Finger Pull 1 7/8" 1583-WN 1 7/8" length 4444-WN 1" length WN 1 5/7" dia WID 4475-WID 4473-PWT 4475-PWT WN EB WC WID 4465-WN 4466-WN 4465-EB 4466-EB 4465-WC 4466-WC 4465-WID 4466-WID Square Knob 1 1/8" Square Knob 1 1/8" Square Knob 1 1/8" Square Knob 1 1/8" Square Knob 1 1/8" Square Knob 1 1/8" 4466-WN 1 1/8" length 4465-WN *Oversized knob images are located on page WN 80 Decorative Hardware ECLECTIC Amerock 81

42 NATURE'S SPLENDOR TM AMBROSIA TM 4451-R WID WN R2 RBZ WID PWT WN R2 RBZ WID 4451-WN 4452-WN 4451-R R RBZ 4452-RBZ Finger Pull 1 1/2" Finger Pull 1 1/2" Finger Pull 1 1/2" 4452-R2 1 1/2" length 4482-WN 4484-WN 4482-R R RBZ 4484-RBZ 4484-WID 4451-WID 4452-WID Finger Pull 1 1/2" 4482-WID 4484-WID 4451-PWT 4452-PWT Finger Pull 1 1/2" CYPRUS TM WN R2 RBZ WID 4483-WN WN R2 WC WID WID 4483-WN 4485-WN WN WN Knob 1 5/8" Knob 1 5/8" WID 1 5/8" length 4483-R R RBZ 4485-RBZ 4483-WID 4485-WID 4485-WN R R2 Knob 1 5/8" WC WC Knob 1 5/8" WID WID Knob 1 5/8" Amerock 82 Decorative Hardware ECLECTIC 83

43 AMBROSIA TM TRUE ELEGANCE 4480-PWT G9 WN WID PWT 077 WI 1351-WI 4480-G G WN 4481-WN Knob 1 1/8" Knob 1 1/8" 4481-PWT 1 1/8" dia O O WI 1355-WI 1355-WI 4480-WID 4480-PWT 4481-PWT Knob 1 1/8" ABSTRACTIONS TM WN PWT GPT 4467-GPT 26 26D D 4467-WN 4468-WN 4467-PWT 4468-PWT 4467-GPT 4468-GPT Square Square Square 4468-GPT 1 1/4" length D D D Celebrating Our People... Laura Thompson Graphic Designer Q: What is your favorite piece to design? A: "I love to design anything that poses a challenge to improve what was done in the past. My favorite type of piece to design is anything that resembles a book, so that a person can be taken through a story; there are so many emotions conveyed through design." 84 Decorative Hardware ECLECTIC Amerock 85

44 NATURAL ELEGANCE NATURAL ELEGANCE G WI PWT 1333-PWT 077 RBZ WI 1332-WI 1333-G G G O O O O O77 Knob 1 7/32" Knob 1 9/16" Knob 1 7/32" Knob 1 7/32" Knob 1 9/16" 1337-PWT 1 7/32" dia PWT 1 9/16" length 1332-O O RBZ 1335-RBZ 1332-WI 1335-WI Knob 1 11/32" Knob 1 11/32" Knob 1 11/32" 1335-WI 1 11 /32" dia WI 1337-WI 1338-WI Knob 1 7/32" Knob 1 9/16" 1333-PWT 1337-PWT 1338-PWT Knob 1 7/32" Knob 1 9/16" G9 077 RBZ WI 1330-RBZ G G G G O O77 Knob 1 11/32" Knob 1 11/32" 1336-RBZ 1 11/32" dia RBZ 1336-RBZ Knob 1 11/32" 1334-G WI 1336-WI Knob 1 11/32" 1334-O O77 motif'z TM PWT 4447-PWT PWT 86 Decorative Hardware ECLECTIC Amerock 87

45 forgings TM forgings TM WN R2 WC WID 4453-R2 R3 RBZ WI ORB 4424-ORB 4453-WN 4454-WN 4453-R R2 Cup Square Knob 1 1/8" Cup Square Knob 1 1/8" 4454-R2 1 1/8" length R R3 Pull 1 1/4" Pull 1 1/4" 4425-ORB 4453-WC 4454-WC Cup Square Knob 1 1/8" 4424-RBZ 4425-RBZ Pull 1 1/4" 4453-WID 4454-WID Cup Square Knob 1 1/8" 4424-WI 4425-WI Pull 1 1/4" 4424-ORB 4425-ORB Pull 1 1/4" R3 RBZ WI 4426-R3 VILLAGE CLASSICs TM 4426-R R RBZ 4427-RBZ Pull 1 1/4" Pull 1 1/4" 4427-R3 ROB RIN RIN 128mm ctr WI 4427-WI Pull 1 1/4" ROB ROB Knob 80mm RIN RIN Knob 80mm R3 RBZ WI 4428-RBZ RIN 80mm length 4428-R R RBZ 4429-RBZ Square Knob 1 1/8" Square Knob 1 1/8" 4429-RBZ 1 1/8" length 4428-WI 4429-WI Square Knob 1 1/8" 88 Decorative Hardware ECLECTIC Amerock 89

46 DIVINITY TM yin-yang 5260-G CCB G9 PWT 26PB CCB 5260-G G PB PB 5260-PWT 5261-PWT 5261-G CCB CCB CCB utensil'z WN WID WN R WN WN WN WN WID WID WID WN 9332-R R R VEGGIE'z TM /16" length Knob 2 3/16" 90 Decorative Hardware ECLECTIC Amerock 91

47 Oversized Unique sizes are the new standard. Expanded size offerings from 3" pulls to 18" appliance pulls and multiple size knobs Amerock 93

48 HIGHLAND RIDGE ROCHDALE TM PN AP DOB PN 18" ctr. GPH GPH 18" ctr PN PN PN AP AP AP Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" PN 12" ctr GPH GPH Appliance Pull 18" Appliance Pull 12" Appliance Pull 18" Appliance Pull 12" Additional collection images are located on page GPH 12" ctr DOB DOB DOB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" PN 8" ctr. KANE TM Additional collection images are located on page 18. WESTERLY TM WN ORB WN 18" ctr. GPH " ctr Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 4/7" WN 12" ctr Appliance Pull 18" Appliance Pull 12" " ctr WN WN WN WN Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 4/7" GPH GPH Appliance Pull 18" Appliance Pull 12" Additional collection images are located on page ORB ORB ORB ORB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 4/7" Additional collection images are located on page WN 8" ctr WN 1 4/7" dia. 94 Decorative Hardware OVERSIZED Amerock 95

49 inspirations TM POLARA TM WN ORB FB WN 8" ctr. AP SBK SBK 12" ctr WN WN Appliance Pull 8" Oversized Knob 1 3/4" Appliance Pull 8" Oversized Knob 1 3/4" WN 1 3/4" dia AP Appliance Pull 12" SBK Appliance Pull 12" Additional collection images are located on page ORB ORB Appliance Pull 8" Oversized Knob 1 3/4" FB FB Appliance Pull 8" Oversized Knob 1 3/4" Essential'Z TM Additional collection images are located on page 22. WN ORB ORB 12" ctr " ctr. WID ORB Appliance Pull 12" WN Appliance Pull 12" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 3/4" " ctr ORB Appliance Pull 12" 1788-WID 1787-WID WID WID Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 3/4" " ctr. HINT OF HERITAGE 1788-ORB 1787-ORB ORB ORB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 3/4" Additional collection images are located on page /8" dia /4" dia Oversized Additional collection images are located on page Decorative Hardware OVERSIZED Amerock 97

50 BAR PULLS RIVA SS 256mm ctr " ctr. SS ORB GPH SS SS SS SS SS SS SS SS SS ORB ORB ORB ORB ORB ORB ORB ORB ORB Cabinet Pull 256mm Appliance Pull 12" Cabinet Pull 320mm Cabinet Pull 416mm Appliance Pull 18" Cabinet Pull 480mm Cabinet Pull 544mm Cabinet Pull 640mm Cabinet Pull 768mm Cabinet Pull 256mm Appliance Pull 12" Cabinet Pull 320mm Cabinet Pull 416mm Appliance Pull 18" Cabinet Pull 480mm Cabinet Pull 544mm Cabinet Pull 640mm Cabinet Pull 768mm SS 12" ctr SS 320mm ctr SS 416mm ctr SS 18" ctr GPH GPH GPH Essential'Z TM Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Additional collection images are located on page " ctr " ctr. Additional collection images are located on page 27 and SS 480mm ctr " ctr SS 544mm ctr SS 640mm ctr Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" " ctr. Additional collection images are located on page SS 768mm ctr " ctr. 98 Decorative Hardware OVERSIZED Amerock 99

51 REVITALIZE MULHOLLAND TM GB ORB GB 18" ctr. ORB ORB 18" ctr GB GB GB ORB ORB ORB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" GB 12" ctr GB 8" ctr ORB ORB ORB ORB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 1/2" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 1/2" Additional collection images are located on page ORB 12" ctr ORB 8" ctr. Additional collection images are located on page 48. LATTICE TM ORB 1 1/2" length SN DBS RB DOB DOB 18" ctr. MANOR SN SN SN SN Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" DOB 12" ctr. PN ORB ORB 1 3/7" length DBS DBS DBS DBS Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" PN Oversized Knob 1 3/7" Oversized Knob 1 3/7" RB RB RB RB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" DOB 8" ctr ORB Oversized Knob 1 3/7" Additional collection images are located on page DOB DOB DOB DOB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" Additional collection images are located on page DOB 1 2/3" dia. 100 Decorative Hardware OVERSIZED Amerock 101

52 BRASS & STERLING TRADITIONS BLACKROCK G9 077 RB ORB 1316-RB 18" ctr. ORB BBR BBR 18" ctr RB 12" ctr G Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" RB 8" ctr Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Square Knob 1 1/2" Oversized Knob 1 5/8" BBR 12" ctr O RB 1315-RB RB 1316-ORB 1315-ORB ORB Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Additional collection images are located on page ORB ORB ORB ORB ORB BBR BBR BBR BBR BBR Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Square Knob 1 1/2" Oversized Knob 1 5/8" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Square Knob 1 1/2" Oversized Knob 1 5/8" BBR 8" ctr. TRADITIONAL CLASSICS Additional collection images are located on page BBR 1 1/2" length WN R R2 12" ctr Appliance Pull 12" BBR 1 5/8" dia WN R2 Appliance Pull 12" Appliance Pull 12" MANOR RB ORB ORB 2" length RB ORB Oversized Knob 2" Oversized Knob 2" Oversized Knob 2" Additional collection images are located on page Decorative Hardware OVERSIZED Amerock 103

53 PADMA TM ALLISON TM VALUE HARDWARE AP DBS VS ART AP 12" ctr. WN ORB GPH " ctr. A full finish index is located on pages AP Appliance Pull 12" DBS Appliance Pull 12" VS Appliance Pull 12" ART Appliance Pull 12" Additional collection images are located on page WN WN WN WN Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" " ctr. SWIRL'Z ORB ORB ORB ORB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" " ctr GPH GPH GPH GPH Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Oversized Knob 1 2/3" ORB ORB 1 3/4" dia. Additional collection images are located on page /3" length Oversized Knob 1 3/4" ORB Oversized Knob 1 3/4" Additional collection images are located on page 77. ORB " ctr. inspirations TM A full finish index is located on pages Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" " ctr. WN EB ORB WN 1 3/4" dia ORB ORB ORB Appliance Pull 18" Appliance Pull 12" Appliance Pull 8" Additional collection images are located on page Oversized Knob 1 3/4" " ctr WN Oversized Knob 1 3/4" EB Oversized Knob 1 3/4" ORB Oversized Knob 1 3/4" Additional collection images are located on page Decorative Hardware OVERSIZED Amerock 105

54 Allison TM Value Hardware Popular, time tested basics in design and finishes at an affordable price Amerock 107

55 Silver Tones Rustic Tones 26 26D SCH AC WC RBZ Polished Chrome Brushed Chrome Brushed Chrome Antique Copper Weathered Copper Rustic Bronze DARK Tones CH G9 WN Polished Chrome Sterling Nickel Satin Nickel Weathered Nickel WI WID ORB GPH BN Gold Tones Wrought Iron Wrought Iron Dark Oil-Rubbed Bronze Graphite Black Nickel 3 B PB EB BRB BNB FB Polished Brass Polished Brass Polished Brass Elegant Brass Brushed Brass Black Nickel (Solid Brass) Flat Black COLORS LB AE AB ABS BB Light Antique Brass Antique Brass Antique Brass Antique Brass Burnished Brass 30 W 54 PW GW White White White White White Ceramic R1 Regency Brass R2 Weathered Brass R3 Rustic Brass DEL WHT CW1 GC BON White with Pattern White or White with Pattern White Ceramic with Blue Pattern White Ceramic with Gray Circle Bone (Almond) 108 ALLISON VALUE HARDWARE FINISH INDEX Amerock 109

56 COLORS TWO-TONED PA AL HGR NB BJ AL3 FWP OM OB Almond Almond Hunter Green Navy Blue Paint Black Almond with Polished Brass Almond / Polished Brass with Flower Oatmeal with Antique Brass Oatmeal / Antique Brass BL BLK PBK NBZ O3 OLB OPB 26W Black Black Black Black Oak Insert with Polished Brass Oak with Burnished Brass Oak / Polished Brass Polished Chrome with White Plastic or Ceramic MB BK BC W3 Matte Black Paint Black Ceramic Polished Chrome / Brass Brass with Polished Chrome Polished Chrome / Brass Polished Brass with White Ceramic Insert TWO-TONED A3 Almond with Antique Brass BNW White Plastic or Ceramic with Black Nickel WCH 30A WPB WAB White / Polished Chrome White Ceramic with Brass Insert White / Polished Brass White with Light Antique Brass BN3 Black Nickel with Bright Brass CB Colonial Black FWB White / Light Antique Brass with Flower WB White Ceramic Insert in Burnished Brass 110 ALLISON VALUE HARDWARE FINISH INDEX Amerock 111

57 WOOD TONES WOOD WDMA MA1 WD WDO Unfinished Wood Unfinished Wood, Maple Natural Stained Wood Unfinished Wood, Birch Unfinished Wood, Oak WDCH MA2 MA4 Unfinished Wood, Cherry Spiced Stained Wood Cherry Stained Wood Celebrating Our People... John Kratt Consumer Research Manager Q: What impact does the consumer feel that hardware has on their kitchen? A: "For many homeowners, Decorative Cabinet Hardware remains the kitchen's hidden jewel. our core consumer realizes that when it comes time to remodeling the kitchen that cabinet hardware provides the "biggest bang for the buck." Seriously, for the cost, time, and tools required, what other product can change the entire look and feel of the kitchen? remember, cabinet hardware covers the kitchen floor-to-ceiling and wall-to-wall... no other product in the kitchen comes close to what decorative hardware can do for such minimal effort/investment." 112 ALLISON VALUE HARDWARE FINISH INDEX

58 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE WN ORB GPH A full finish index is located on pages ORB 160mm ctr. 26 EB BB ORB ORB 160mm ctr. BN FB * * * * WN* WN* WN* WN WN WN WN WN* WN ORB* ORB* ORB* ORB ORB ORB ORB ORB* ORB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 3" Knob 2 5/8" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 3" Knob 2 5/8" Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 3" Knob 2 5/8" ORB 128mm ctr ORB ORB A full finish index is located on pages * * * EB BB ORB* ORB* ORB* ORB ORB ORB ORB BN FB Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm ORB 128mm ctr ORB ORB GPH* GPH* GPH* GPH GPH GPH GPH GPH* GPH Appliance Pull* 18" Appliance Pull* 12" Appliance Pull* 8" Pull 160mm Oversized Knob* 3" Knob 2 5/8" ORB 3" length * Appliance pull and oversized knob images are located on page 105. * Appliance pull and oversized knob images are located on page ORB 2 5/8" length 114 Decorative Hardware ALLISON VALUE HARDWARE Amerock 115

59 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE BB ORB 26 3 EB BB FB ORB BN FB A full finish index is located on pages A full finish index is located on pages BB BB BB BB ORB ORB ORB FB FB FB FB Knob 1 3/16" Knob 1 3/16" Knob 1 3/16" Knob 1 3/16" Knob 1 3/16" Knob 1 3/16" /16" dia EB EB BB BB BB BB BB BB Cup Cup Cup Cup FB A full finish index is located on pages " ctr ORB ORB ORB BN BN Cup FB Pull 1" Pull 1" Pull 1" FB FB FB FB FB FB FB Cup 116 Decorative Hardware ALLISON VALUE HARDWARE Amerock 117

60 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 26 3 EB BB 26 WN 3 AE " ctr /8" length ORB BN FB BB R3 WI BNB FB A full finish index is located on pages A full finish index is located on pages /2" ctr /8" length WN AE BB R3 Pull 4" Cup Pull 2 1/2" Cup Pull 2 1/2" Pull 4" Pull 3 1/2" Cup Pull 2 1/2" Pull 4" Cup Pull 2 1/2" Cup Pull 2 1/2" /2" ctr EB EB EB EB EB WI 1452-BNB FB Cup Pull 2 1/2" Pull 4" Cup Pull 2 1/2" BB ORB ORB ORB ORB BN BN BN BN 3 A full finish index is located on pages FB FB FB FB FB " Knob 1" " dia. 118 Decorative Hardware ALLISON VALUE HARDWARE Amerock 119

61 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 26 3 BB FB CH SCH PB LB 173CH A full finish index is located on pages ORB 172SCH A full finish index is located on pages BB BB CH 174CH 172SCH 174SCH 253SCH 254SCH 174SCH 253SCH FB FB SCH 26 WN 3 EB PB 253PB 254PB 1908-PB 172LB 253LB BB ORB FB A full finish index is located on pages ORB 174-ORB WN WN WN WI A full finish index is located on pages WN 1 1/4" ctr WN EB EB WI BB BB ORB ORB FB FB 120 Decorative Hardware ALLISON VALUE HARDWARE Amerock 121

62 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 26 26D 3 PB G9 3 PB B 1952-BNB 3 1/2" ctr. B AE BB BRB ORB LB BB R1 WID BNB BN BNB FB MB NBZ GW MB 1951-BNB A full finish index is located on pages A full finish index is located on pages D D PB 1950-B 1950-AE BB 1950-BRB 1950-ORB 1443-ORB 1910-BN 1950-BNB 1443-BNB D D /4" length G PB 1951-B 4261-B 252LB 3441-BB R R R WID 1952-BNB 1951-BNB 3441-GW GW 3441-MB MB Pull 3 1/2" Pull 3 1/2" PB 4261-B FB 710-MB 1950-NBZ 122 Decorative Hardware ALLISON VALUE HARDWARE Amerock 123

63 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE mm ctr /4" dia. A full finish index is located on pages A full finish index is located on pages Knob 1 3/4" Knob 1 1/2" Knob 1 1/2" Knob 1 1/16" Knob 1 1/2" Knob 1 1/2" /2" dia Knob 1 3/4" Knob 1 1/2" /2" dia CB 3 1/4" ctr. ABS AC BL CB A full finish index is located on pages /16" dia. 410ABS 3401-AC Pull 3 1/4" Pull 3 1/4" 410BL 3401-CB Pull 3 1/4" Pull 3 1/4" 26 26D B AE 1950H-26 BNB A full finish index is located on pages AC CB 3403-CB A full finish index is located on pages H H-26D 3403-AC 1950H CB 1950H-B 1950H-AE 1950H-BNB 124 Decorative Hardware ALLISON VALUE HARDWARE Amerock 125

64 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE BJ A full finish index is located on pages D 3 BB D 4" ctr BN BNB W BJ Pull 2 3/4" Pull 2 3/4" /4" ctr. A full finish index is located on pages CS CS CS CS-26 Pull 4" Pull 4" Pull 3 1/2" Pull 3 1/2" D 3 1/2" ctr D 26D 3 A full finish index is located on pages D D D D D D 76312CS-26D D 76313CS-26D D 867CS-26D D 865CS-26D Pull 4" Pull 3 1/2" Pull 4" Pull 4" Pull 3 1/2" Pull 3 1/2" D D 4" ctr D CS CS CS CS- Pull 4" Pull 4" Pull 3 1/2" Pull 3 1/2" D G9 R1 A full finish index is located on pages G9 Knob 1 1/2" G9 1 1/2" length CS CS CS CS BB Pull 4" Pull 4" Pull 3 1/2" Pull 3 1/2" D 3 1/2" ctr D R1 Knob 1 1/2" 865-BN 978-BN BN 867-BN Pull 3 1/2" Pull 3 1/2" 1970-BNB 126 Decorative Hardware ALLISON VALUE HARDWARE 977-W Amerock 127

65 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 149-AE AE AE ABS BB AC RBZ 3468-AE A full finish index is located on pages A full finish index is located on pages AE 156-AE 176-AE 178-AE 638-AE 644-AE 859-AE AE 156-AE 176-AE 3468-AE 3470-AE AE 714ABS 894ABS 743-BB 3421-BB 3470-AE AE 178-AE 3434-AC RBZ 714ABS 638-AE 894ABS 644-AE 743-BB 859-AE 3421-BB AE 3434-AC RBZ 128 Decorative Hardware ALLISON VALUE HARDWARE Amerock 129

66 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 3 AE ABS AC A full finish index is located on pages BL 591-AE /8" dia. 3 B PB R1 RBZ AE 643-AE 728-AE 755-AE 778-AE 776-AE 3448-AE 3410-AE 594-AE 3467-AE AE Knob 2" Knob 1 1/8" Knob 1 1/16" Knob 2" Knob 1 1/2" Knob 1 1/2" Knob 1 1/16" Knob 1 1/8" Knob 1 1/2" 728-AE 778-AE 2" dia. 643-AE 1 1/16" dia. 755-AE GW A full finish index is located on pages B 14465PB R R B 125ABS 159ABS 497ABS 890ABS 3433-AC Knob 1 1/2" Knob 1 1/16" Knob 1 1/2" Knob 1 1/2" 3448-AE 1 3/8" dia. 776-AE RBZ 750-GW 14465PB 497BL Knob 1 1/16" R1 594-AE 1 1/2" dia AE 1 1/2" dia R /2" dia. 159ABS 1 1/2" dia AE 1 1/16" dia RBZ 3433-AC 1 1/2" dia. 125ABS 890ABS 1 1/2" dia. 497ABS 1 1/16" dia. 130 Decorative Hardware ALLISON VALUE HARDWARE Amerock 131

67 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE D CH G9 BNB 4266-BNB A full finish index is located on pages A full finish index is located on pages D 170CH 981-G BNB D 170CH G SCH CH A full finish index is located on pages SCH 4" ctr SCH 942SCH 942CH Pull 4" 942SCH 132 Decorative Hardware ALLISON VALUE HARDWARE Amerock 133

68 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 3 PB LB AE AB /8" dia SCH CH A full finish index is located on pages SCH 1 3/16" dia. BB R1 RBZ GW MB A full finish index is located on pages Knob 1 3/16" Knob 1 1/16" Knob 1 5/16" /16" dia SCH 14408SCH 14403SCH 14401CH 831CH 973CH Knob 1 3/16" Knob 1 11/16" Knob 1 5/16" Knob 1 3/16" 14408SCH 1 11/16" length 14401CH 14403SCH 1 5/16" dia. 831CH 255PB 256PB 256LB 848LB 728-AE /16" dia. 255PB 973CH 1 3/16" dia. 875AB 3443-BB 3423-BB Knob 1 3/16" Knob 1 1/2" R1 989-R R RBZ Knob 1 3/16" Knob 1 1/16" 848LB 1 3/8" dia. 256PB 3 A full finish index is located on pages /2" dia GW Knob 1 3/16" 3443-MB Knob 1 3/16" 875AB 1 3/8" dia BB 1 3/16" dia Knob 1 1/2" Knob 1 1/8" /8" dia BB 1 1/2" dia. 989-R1 1 3/8" dia R1 AB A full finish index is located on pages AB 1 3/8" dia. 1356AB 1 3/8" dia R1 1 3/16" dia RBZ 1 1/16" dia. 1355AB 1356AB Backplate 1 3/8" 134 Decorative Hardware ALLISON VALUE HARDWARE Amerock 135

69 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE 3 BB AE BB 176C-AE A full finish index is located on pages A full finish index is located on pages BB 3422-BB 3444-BB Backplate Knob 3 11/16" Backplate Backplate Knob 1 7/8" Backplate Knob 1 3/4" Backplate Backplate Backplate Knob 3 11/16" 3426-BB 176C-AE 183C-AE 735-AE 3424-BB 183C-AE 735-AE 3422-BB 3424-BB 3444-BB 3 11/16" length 876-AE AE A full finish index is located on pages AE 886-AE Knob 1" /8" dia /4" dia. 886-AE 1" dia. 136 Decorative Hardware ALLISON VALUE HARDWARE Amerock 137

70 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE AE ABS BB AE ABS BB 888-AE 1 3/8" dia. 888ABS 1 1/2" dia. A full finish index is located on pages AE A full finish index is located on pages AE AE 871-AE 766-AE 768-AE Pull 2 1/2" Pull 2 1/2" Pull 2 3/4" 888-AE 888ABS 3427-BB Knob 1 1/2" 573ABS 802ABS 573ABS 3427-BB 1 3/8" dia BB 871-AE BNB BN3 A full finish index is located on pages BN BNB 1964-BNB 1963-BNB Pull 3 1/2" Knob 3/4" 1965-BNB 3 1/2" ctr BB 802ABS Knob 3/4" BN BNB 768-AE 2 3/4" ctr AE 2 1/2" ctr BNB 3/4" dia. 766-AE 2 1/2" ctr. 138 Decorative Hardware ALLISON VALUE HARDWARE Amerock 139

71 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE LB ABS 30 OM 26W 885LB 879ABS AB WCH 30A WPB FWB A BC W3 WB FWP 0B 03 OPB A full finish index is located on pages LB W W3 A full finish index is located on pages WPB 879ABS Knob 1" " dia AB 14351WCH 262WCH Knob 1 3/16" 262WPB 878-OM A W 1956-BC 244WPB 262WPB W W BC W FWB WB 244FWP 861-BB OB O3 265OPB BB 265OPB A full finish index is located on pages W W WCH 1 3/16" dia. 861-BB 862-BB BB Decorative Hardware ALLISON VALUE HARDWARE Amerock 141

72 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE AB WCH WPB WAB FWB W MB 874-MB A full finish index is located on pages WB AL3 FWP OB O3 263WCH 874-MB 710-MB 853-MB Knob 1/4" Knob 3/16" 710-MB OLB PBOK OPB 26W W3 A3 BNW A full finish index is located on pages W 853-MB 1 3/16" dia AB 263WCH 245WPB 14222WPB 245WAB FWB WB WB AL3 245FWP OB OB Celebrating Our People... Tiffany Mallory Associate Product Manager Q: Tell me a little about the thought behind 2009 Spring Launch? A: "To sweep the market with all the product solutions they ve asked for: latest trends in finish and design, full offering of sizes in the best collections, and top-selling designs with the Amerock brand." O3 245OLB 1925-PBOK OPB W W W W A BNW 142 Decorative Hardware ALLISON VALUE HARDWARE Amerock 143

73 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE WOOD WDMA MA1 WD WDO W WHT GC BON /8" dia /16" dia. WDCH MA2 MA4 AL HGR BLK BC A full finish index is located on pages WD 3 1/2" ctr. A full finish index is located on pages WDMA 881-WDMA 880-MA1 881-MA1 845-WD 847-WD 814-WD 813-WD 811-WD 812-WD 880-WDO 881-WDO 880-WDCH 881-WDCH Knob 2 1/2" Knob 1 3/4" Knob 1" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" Pull 3 1/2" Knob 2" Knob 1 1/2" Knob 1" Knob 1 1/2" Knob 1 1/2" /2" dia. 847-WD 814-WD 2" dia W 1927-W 14221WHT 14204WHT 14224WHT 902WHT 217WHT 5322-GC 217BON 14202AL 217HGR 902BLK 217BLK BK 5322-BC Knob 1 3/16" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" 1920-W 1 1/2" dia WHT 1 3/8" dia WHT 1 3/8" dia W 1 1/2" dia WHT 902WHT 880-MA2 881-MA2 Knob 1 1/2" /4" dia. 880-WDCH 1 1/2" dia. 217WHT 1 1/2" dia GC 1 1/2" dia. 880-MA4 Knob 1 1/2" /2" dia. 813-WD 1 1/2" dia. 217BON 1 1/2" dia AL 881-MA1 811-WD BC 1 1/2" dia BK 932 1" dia. 812-WD 1" dia. 144 Decorative Hardware ALLISON VALUE HARDWARE Amerock 145

74 ALLISON TM VALUE HARDWARE ALLISON TM VALUE HARDWARE DEL WHT CW1 937-CW1 W 54 PW WHT PA 977-W A full finish index is located on pages DEL Knob 1 1/2" BJ PBK BC A full finish index is located on pages WHT WHT CW1 Knob 1 1/2" Knob 1 1/2" Knob 1 1/2" 221DEL 1 1/2" dia. 977-W Knob 1 13/16" Knob 1 3/16" Knob 1 1/2" /2" dia. 803-PW 802-PW 803-PW 232WHT 231WHT Knob 1" PA 802-PA 5373-BJ 5432-BJ 5322-BJ Knob 1 1/2" /16" length /16" dia. 803-PBK 802-PBK 221WHT 1 1/2" dia BC Knob 1 1/2" /2" dia. 802-PW 226WHT 232WHT 231WHT 1" dia /2" dia. 146 Decorative Hardware ALLISON VALUE HARDWARE Amerock 147

75 Bath Hardware Finish Index p.150 Arrondi TM p.151 Markham TM p.152 Clarendon TM p.153 Saybrook Classic TM p.154 Saybrook TM p Amerock 149

76 Silver Tones ARRONDI TM 26 PN SS SS A full finish index is located on page SS 24" Double Towel Bar Polished Chrome Satin Nickel Polished Nickel Stainless Steel DARK Tones SS SS SS SS SS SS SS 24" Double Towel Bar 24" Towel Bar 18" Towel Bar 9" Towel Bar Towel Ring Tissue Roll Holder Robe Hook SS 24" Towel Bar Coordinates well with contemporary cabinet hardware located on pages ORB Oil-Rubbed Bronze SS 18" Towel Bar SS 9" Towel Bar Celebrating Our People... Betty Schaller Planner 19 Years with Amerock Q: What are your favorite Amerock memories? A: "Too many. My entire adult life has been with amerock with most of my memories and relationships happening with Amerock. To pick a few, company picnics, working inventory nights until 3a.m. with a hardworking yet fun group of people, cleaning out the filter socks on the roof above hand brush on a 100 degree day. And of course meeting and working with so many people through out the years. Like a huge extended family. Friendships and happy memories that hold strong today. With my best Amerock friend being my husband J.D." Celebrating Our People... Teresa Egler Customer Service Manager 15 Years with Amerock Q: What is the most challenging thing customer service faces? A: "The most challenging thing customer service faces is utilizing the technologies and systems that are right for our industry, and adjusting our business model and processes to meet or exceed our customers' expectations." SS Towel Ring SS Tissue Roll Holder SS Robe Hook 150 Bath hardware FINISH INDEX Amerock 151

77 MARKHAM TM clarendon TM PN ORB A full finish index is located on page PN 24" Towel Bar 26 ORB A full finish index is located on page ORB 24" Double Towel Bar PN PN PN PN PN PN ORB ORB ORB ORB ORB ORB 24" Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Pivoting Double Post Tissue Roll Holder Robe Hook 24" Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Pivoting Double Post Tissue Roll Holder Robe Hook Coordinates well with traditional cabinet hardware located on pages PN Towel Ring PN 18" Towel Bar " Double Towel Bar 24" Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Pivoting Double Post Tissue Roll Holder Robe Hook 24" Double Towel Bar 24" Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Pivoting Double Post Tissue Roll Holder Robe Hook ORB 24" Towel Bar ORB 18" Towel Bar PN Tissue Roll Holder PN Pivoting Double Post Tissue Roll Holder ORB ORB ORB ORB ORB ORB ORB 24" Double Towel Bar 24" Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Pivoting Double Post Tissue Roll Holder Robe Hook Coordinates well with transitional and traditional cabinet hardware located on pages and ORB Towel Ring ORB Tissue Roll Holder PN Robe Hook ORB Pivoting Double Post Tissue Roll Holder ORB Robe Hook 152 Bath hardware Amerock 153

78 SAYBROOK CLASSIC TM SAYBROOK TM ORB A full finish index is located on page ORB 24" Towel Bar A full finish index is located on page " Towel Bar ORB ORB ORB ORB ORB 24" Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Robe Hook Coordinates well with traditional cabinet hardware located on pages ORB 18" Towel Bar " Towel Bar 18" Towel Bar Towel Ring Tissue Roll Holder Double Post Tissue Roll Holder Robe Hook Coordinates well with transitional cabinet hardware located on pages " Towel Bar ORB Towel Ring Towel Ring ORB Tissue Roll Holder Tissue Roll Holder ORB Robe Hook Double Post Tissue Roll Holder Robe Hook 154 Bath hardware Amerock 155

79 Functional Hardware Finish Index p.158 Decorative Hinges p.160 Concealed Hinges p.192 Catches p.198 Accessories p.205 Drawer Slides p Amerock 157

80 Silver Tones DARK Tones G CP BN CB DAE FB ORB Nickel Polished Chrome "Perma-Brite" Zinc Champagne Satin Nickel Black Nickel Colonial Black Dark Antique English Flat Black Oil-Rubbed Bronze G9 M26 PWT WI Sterling Nickel Machine Chrome Pewter Wrought Iron GOLD Tones COLORS 3 BNL AE BB M3 A BK PT W Polished Brass Brass Antique Brass Burnished Brass Machine Brass Almond Black Plastic Tan White Two-tone PB R3 SB Brushed Brass Burnished Brass Polished Brass Rustic Brass Solid Brass W W3 RUSTIC Tones White / Zinc White / Polished Brass AC HBZ RBZ Antique Copper Hammered Bronze Rustic Bronze 158 FUNCTIONAL Hardware Finish index Amerock 159

81 FULL WRAP Self-closing, Full Wrap Features Choice of overlays from 1/4" to 5/8", plus 3/8" insert application Heavy-duty steel construction Wide range of mounting options Dual-spring mechanism for quiet, consistent self-closing power Choice of door wing styles and hole patterns Dual-spring mechanism Overlays from 1/4" to 5/8" Choice of door wing styles and hole patterns Heavy duty steel construction 3 BB Overlay /2" 7542-BB 1/2" /2" Screws: (2) #6 F.H. x 5/8"; (3) #6 F.H. x 1/2" Self-closing, Full Wrap BB 1/4" 1/2" S 1/4" 3 Overlay 1/4" Overlay 1/2" Overlay 7540-BB 1/2" 7540-BB Overlay Screws: (2) #6 F.H. x 5/8"; (3) #5 F.H. x 1/2" /4" Screws: (2) #6 F.H. x 5/8"; (3) #6 F.H. x 1/2" PARTIAL WRAP BB 1/4" Features Choice of overlays from 13/64" to 1/2", plus 3/8" inset and reverse bevel applications Heavy-duty steel construction Wide range of mounting options Slotted holes for easy adjustment Overlays from 13/64" to 1/2" Slotted holes Overlay 7567-BB 1/4" 7567-BB Dual-spring mechanism for quiet, consistent self-closing power Choice of door wing styles and hole patterns Dual-spring mechanism Choice of door wing styles and hole patterns Screws: (1) #8 T.H. x 3/4"; (2) #6 T.H. x 1/2" Heavy duty steel construction 160 Decorative Hardware DECORATIVE HINGES Amerock 161

82 Self-closing, PARTIAL Wrap Self-closing, PARTIAL Wrap WN BB ORB 1/4" 14 WN 3 BB 1/4" 1/2" S Overlay WI ORB FB W /4" Overlay 1/2" Overlay /4" 7566-WN 1/4" 7566-BB 1/4" Overlay 7566-ORB 1/4" Screws: (2) #6 F.H. x 5/8"; (3) #5 F.H. x 1/2" /2" /2" 7550-WN 1/2" /2" 7550-BB 1/2" 7550-WI 1/2" 1/4" 7550-ORB 1/2" BB 7550-FB 1/2" 7550-W 1/2" 13/64" 1/4" 3/8" Overlay 7553-BB Screws: (2) #6 F.H. x 5/8"; (3) #5 F.H. x 1/2" D 7553-BB 1/4" Screws: (2) #5 F.H. x 1/2"; (2) #5 F.H. x 5/8" 13/64" Overlay 1/4" Overlay 3/8" Ov 3/8" 1/2" A BB 3/8" 3/8" 3 AE BB Overlay 7556-BB 7556-BB 1/2" 3/8" Inset 1/2" Overlay Revers Overlay /8" 7534-AE Screws: (2) #6 F.H. x 5/8"; (3) #6 F.H. x 1/ AE 3/8" 7534-BB 3/8" Screws: (2) #6 F.H. x 5/8"; (3) #5 F.H. x 1/2" 13/64" 3/8" 1/2" /8" Overlay 7550T1-O77 1/2" 7550T /64" Overlay 3/8" Inset 1/2" Overlay Screws: (2) #6 F.H. x 5/8"; (3) #5 F.H. x 1/2" 162 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 163

83 Self-closing, PARTIAL Wrap Self-closing, PARTIAL Wrap 1/2" 13/64" 3/8" 1/2" 077 WN BB ORB /8" Overlay 7550T2-O77 1/2" 7550T2-077 Inset /8" 7565-ORB 13/64" Overlay 3/8" Inset 1/2" O Screws: (2) #6 F.H. x 5/8"; (3) #5 F.H. x 1/2" 7565-WN 3/8" 7565-BB 3/8" 7565-ORB 3/8" Screws: (2) #6 T.H. x 5/8"; (3) #6 O.H. x 1/2" 1/2" BB FACE MOUNT Overlay 7552-BB 1/2" Screws: (2) #6 F.H. x 5/8"; (2) #7 T.H. x 5/8" 7552-BB Features Traditional, semi-concealed styling Choice of frame wing styles to coordinate with decorative hardware Reliable, self-closing power of dual compression springs Coordinating finishes Dual-spring mechanism Choice of decorative door wing styles and hole patterns 3/8" /8" Variety of decorative frame wing styles Inset 7565T1-O T1-O77 3/8" Screws: (2) #6 T.H. x 5/8"; (3) #6 O.H. x 1/2" SELF CLOSING, FACE MOUNT Overla 3/8" BB Overlay 7564-BB 13/64" Screws: (2) #6 F.H. x 5/8"; (2) #7 T.H. x 5/8" 7564-BB /64" 1/2" 3/8" 3/8" BB 3 Overlay 13/64" Overlay 3/8" Inset 1/2" Overlay Variable Variable Variable Self-closing, partial wrap, 1/2 overlay Variable Overlay DOOR 3/8" In Screws: (2) #6 F.H. x 5/8"; (3) #6 F.H. x 1/2" 164 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 165

84 SELF CLOSING, FACE MOUNT SELF CLOSING, FACE MOUNT CP 3 BB 26 WN 3 BB R3 HBZ RBZ WI ORB 7139-ORB ORB FB W 3429-FB PWT BN BK W W3 Overlay Variable Variable A 3429-WN Variable Overlay Variable Variable 7139-CP Variable Variable Variable 3429-BB Variable 3429-ORB Variable 3429-FB Variable 3429-W Variable Screws: (2) #6 O.H. x 5/8"; (3) #6 F.H. x 1/2" 7139-BB Variable 7139-R3 Variable 7139-HBZ Variable 7139-RBZ Variable 7139-WI 7139-ORB Variable Variable G9 074 AE ORB 7139-PWT Variable 7139-BN Variable 7139-BK Variable 7139-W Variable 7139-W3 Variable 7139-A Variable Screws: (2) #6 O.H. x 5/8"; (3) #6 F.H. x 1/2" Overlay 7329-G9 Variable Variable 7329-O74 Variable 7329-AE Variable 7329-ORB Variable Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 7329-AE 166 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 167

85 SELF CLOSING, FACE MOUNT SELF CLOSING, FACE MOUNT Overlay: 3/8" 26 3 BB AE 3/8" 3 ORB Overlay Variable Overlay 3/8" Inset Reverse Bevel Self-closing, Face Mount Variable Variable Overlay, Reverse Bevel Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 5/8" Overlay Variable Variable Variable Ove 7929-AE Variable 7929-BB Variable 7929-ORB Variable Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 26 3 AE BB Overlay FRAME WIN Variable Variable Overlay 3/ Variable 7629-AE Variable 7629-BB Variable AC Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 3436-AC Overlay Variable 3436-AC Overlay: Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 3/8" AE BB AC 3/8" Overlay BB Variable Variable Variable Overlay 3/8" Inset Reverse Bevel Self-closing, Face Mount Variable Overlay, Reverse Bevel 7630-AE Variable Overlay 7531-BB 7630-BB 7630-AC Variable Variable 7531-BB Variable Screws: (5) #5 O.H. x 5/8" Screws: (5) #6 F.H. x 5/8" 168 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 169

86 SELF CLOSING, FACE MOUNT SELF CLOSING, FACE MOUNT Overlay: 3/8" BB 3 BB WI ORB 3/8" Overlay 7157-BB BN BK W W3 A 7128-ORB 7157-BB Variable Screws: (2) #6 O.H. x 5/8"; (3) #6 F.H. x 1/2" Inset Overlay: /8" /8" 7128-BB 3/8" 26 WN 3 BB 3/8" 3/8" 7128-WI 3/8" 7128-ORB 3/8" 7128-BN 3/8" ORB FB W 3428-FB 7128-BK 3/8" 7128-W 3/8" 7128-W3 3/8" Inset 7128-A 3/8" /8" Screws: (5) #6 O.H. x 5/8" /8" 3428-WN 3/8" /8" 3428-BB 3/8" Overlay: 3428-ORB 3/8" 3428-FB 3/8" 3428-W 3/8" Screws: (5) #6 O.H. x 5/8" 3 1 Inset /8" 3/8" D /8" Variable Overlay 3/8" Inset Reverse B Screws: (5) #6 O.H. x 5/8" Celebrating Our People... Kelly Kiger Product Manager Q: What products in the functional area do you find the most exciting and why? A: "All of them! In reality, we have so much to gain in this area by giving the consumer the power to make an educated decision." 170 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 171

87 SELF CLOSING, FACE MOUNT SELF CLOSING, FACE MOUNT Overlay: Overlay: 3/8".500 3/8" G9 074 AE AC 3/8" 26 3 AE BB 3/8" 7328-AE Inset ORB G9 3/8" 7328-O74 3/8" 7328-AE 3/8" Inset 7328-AC 3/8" /8" Screws: (5) #5 O.H. x 5/8" /8" /8" 7928-AE 3/8" Overlay: 7928-BB 3/8" 7928-ORB 3/8".500 3/8" Screws: (5) #5 O.H. x 5/8" 26 3 AE BB 3/8" Inset /8" /8" 7628-AE 3/8" Overlay: 3/8" 3/8" 7628-BB 3/8" Screws: (5) #5 O.H. x 5/8" Inset /8" Variable Overlay 3/8" Inset Reverse B Screws: (5) #5 O.H. x 5/8" ABS Overlay: 3/8" 3/8".500 Overlay: 3/8" Inset 786-ABS AE 3/8" 786-ABS 3/8" Screws: (5) #5 O.H. x 5/8" Inset 7728-AE 3/8" 7728-AE Variable Overlay 3/8" Inset Reverse B Screws: (5) #5 O.H. x 5/8" 172 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 173

88 SELF CLOSING, FACE MOUNT double demountable Overlay:.500 3/8" 1/4" Overlay AC 3/8" G9 3 AE BB Inset 3435-AC 3/8" 3435-AC ORB 8701-AE Screws: (5) #5 O.H. x 5/8" Overlay double demountable 8701-G9 1/4" /4" /4" Features Reduce labor by simple one-step routing One-screw adjustment Overlays from 1/4" to 1/2" 8701-AE 1/4" 8701-BB 1/4" Easy mounting hinge slips into pre-routed slots Choice of overlays from 1/4" 1/2", including 3/8" inset Double demountable hinges feature clamping plates, which clamp the hinge to both the door and the frame stile Specially-angled clamps for reliable holding power Easy-clamping mechanism 8701-ORB 1/4" Heavy-duty steel construction Full 3-way adjustability Easily adjust and correct a warped door or a twisted cabinet problem Coordinating finishes Dual-spring mechanism Heavy-duty steel construction AE 1/2" Overlay 3-Way Adjustment BB WI ORB W 8704-W Overlay In-Out Adjustment Vertical Adjustment 8704-G9 1/2" /2" /2" /2" 8704-AE 1/2" 8704-BB 1/2" 8704-WI 1/2" 8704-ORB 1/2" 8704-W 1/2" Horizontal Adjustment 174 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 175

89 double demountable single demountable WI 1/2" Overlay Features Choice of overlays from 13/32" 1/2", plus 3/8" inset Heavy-duty steel construction Wide range of mounting options Overlays from 13/32" to 1/2" Frame wing slots for easy adjustment Dual-spring mechanism for quiet, consistent self-closing power Overlay L8704-WI 1/2" L8704-WI Dual-spring mechanism Specially-angled clamps for reliable holding power Heavy-duty steel construction G9 3 AE BB single demountable ORB 8700-G9.345 Inset 8700-G9 3/8" BB 1/2" DOOR /8" Overlay 8718-BB /8" 8700-AE 3/8" 8718-BB 1/2" Screws: (1) #8 F.H. x 3/4" 8700-BB 3/8" 8700-ORB 3/8" BB 13/32" DOOR Overlay 8740-BB Celebrating Our People... Aaron Martin Senior Product Manager 8740-BB 13/32" Screws: (1) #8 WITH #9 F.H. x 3/4" Q: What style do you have in your kitchen? A: "Traditional/Transitional. I love the warmth of a casual kitchen and have our new Highland ridge 128mm and 160mm pulls on my cabinet doors and drawers." 176 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 177

90 3/8" 3/8" 3/8 Inset Variable Reverse Bevel single demountable single demountable, partial wrap 1/2" 1/2" for 8740, 8718, 8719/8715 (p AE G BB 13/32" /2" 13/32" DOOR Overlay 7760-AE Variable Screws: (2) #5 O.H. x 5/8" 7760-AE ORB Overlay 8719-ORB 1/4" 1/4" , also for 8719 & G9 1/2" single demountable, partial wrap /2" /2" /2" 8719-BB 1/2" 14 3 BB ORB 1/4" 8719-ORB 1/2" Screws: (2) #6 F.H. X 5/8" DOOR Overlay /4" 8715-BB face mount /4" /4" 8715-BB 1/4" 8715-ORB 1/4" Screws: (2) #6 F.H. X 5/8" Features Choice of frame wing styles and finishes to coordinate with decorative hardware Numerous style and application options, such as, flush, offset or inset mounting, or overlay High strength steel Choice of door wing styles and hole patterns Choice of frame wing styles 3 BB ORB 3/8" 3/8" Inset /8" /8" 8714-BB 3/8" 8714-ORB 3/8" Screws: (2) #6 T.H. X 5/8" 178 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 179

91 non self-closing, face mount non self-closing, face mount Overlay: 3/8" G9 3 BB BB 3 3/8" Overlay Inset G9 Variable Variable /8" /8" 7678-BB Variable /8" Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" non self-closing, adjustable BB 3 Overlay BNL PB AE WI Variable Variable Variable Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" DAE 7687M-WI Inset Overlay: 7687M-14 3/8" 7687M-BNL 3/8" 7687M-PB 3/8" 26 3 ORB 3/8" 3/8" 7687M-AE 3/8" 7687M-WI 3/8" 7687M-DAE 3/8" Inset 3417-ORB Screws: (5) #6 O.H. x 5/8" /8" /8" /8" 3417-ORB 3/8" Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 180 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 181

92 non self-closing non self-closing, strap hinge 3 BB CB Inset 7697-BB 1600-CB /8" 7697-BB 3/8" Screws: (5) #5 O.H. x 5/8" 1600-CB Screws: (5) #5 O.H. x 5/8" Flush CB AE 1605-CB Offset Overlay 7580-AE 1605-CB 3/8" 7580-AE Variable Screws: (6) #6 PY.H. x 5/8" Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" non self-closing, "H" Hinge & Strap 3/8" AE 3/8" CB Inset 7538-AE 7538-AE 3/8" Offset 1622-CB Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 1622-CB 3/8" Screws: (4) #6 PY.H. x 5/8" 182 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 183

93 non self-closing, butt hinge non self-closing, "H" Hinge M26 M3 AC CB Wrap 5988-M CB 5988-M26 3/4" 5988-M3 3/4" Screws: (5) #6 F.H. x 1/2" 3404-AC 3404-CB Screws: (6) #6 PY.H. x 5/8" Flush Flush AE AC CB 3/8" Wrap 2335-AE Offset 3406-AC 2335-AE 3406-AC 3/8" Screws: (4) #5 F.H. x 1/2" 1 1/2" Joint x 1 1/2" Width 3406-CB 3/8" Screws: (4) #6 PY.H. x 5/8" AE CB 3/8" 3/8" Wrap 2355-AE Screws: (6) #5 F.H. x 5/8" 2" Joint x 1 3/8" Width 2355-AE Inset 3405-CB 3/8" Screws: (2) #5 O.H. x 5/8"; (3) #5 F.H. x 1/2" 3405-CB AE 1670-AE 1670-AE Flush Screws: (6) #6 PY.H. x 5/8" 184 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 185

94 non self-closing, "H" Hinge non self-closing, adjustable knife hinge AE 3/8" BB 1247-BB Offset 1672-AE Inset 1672-AE 3/8" 1247-BB 3/8" Screws: (6) #6 PY.H. x 5/8" Screws: (6) #6 F.H. x 5/8" Note: Left- and right-handed hinges included non self-closing, adjustable knife hinge Full Wrap & Partial Wrap Features Minaret and ball finial tips provide elegant accents Horizontal adjustment + _ 1/16" 2G BB 1238-BB Exclusive pin treatment assures silent reliable performance Patented angled set hold simplifies installation; easy horizontal/vertical adjustment Door gap as small as 1/16" Vertical adjustment + _ 1/16" Horizontal adjustment + _ 1/16" Overlay G 23/32" 1238-BB 23/32" Designed with interlevered wings to minimize door gap and eliminate the need to mortise the door frame Patented angled set-screw hole Decorative Pin Screws: (6) #6 F.H. x 5/8" Note: Left- and right-handed hinges included Vertical adjustment + _ 1/16" full inset, full wrap, minaret tip 2G BB G Overlay 9/16" G Variable 1242-BB Variable Screws: (6) #6 F.H. x 5/8" AE 9/16" Note: Left- and right-handed hinges included Door Thickness 3180RM-AE 3180RM-AE 9/16" Screws: (2) #6 O.H. x 5/8"; (4) #6 F.H. x 1/2" 186 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 187

95 full inset, full wrap, Ball Tip full inset, full wrap, minaret tip G9 BNL PB SB 3/4" G9 14 BNL PB 3/4" 3175TM- AE RBZ WI ORB DAE 3175TB-ORB AE BB RBZ WI ORB FB DAE FB Door Thickness Door Thickness 3175TB-G9 3/4" 3175TB- 3/4" 3175TB-BNL 3/4" 3175TB-PB 3/4" 3175TB-SB 3/4" 3175TB-AE 3/4" 3175TB-RBZ 3/4" 3175TB-WI 3/4" 3175TB-ORB 3/4" 3175TB-DAE 3/4" 3175TB-FB 3/4" Screws: (3) #6 F.H. x 5/8"; (4) #6 F.H. x 1/2" 3175TM-G9 3/4" 3175TM- 3/4" 3175TM-14 3/4" 3175TM-PB 3/4" 3175TM-AE 3/4" 3175TM-BB 3/4" 3175TM-RBZ 3/4" 3175TM-WI 3/4" 3175TM-ORB 3/4" 3175TM-DAE 3/4" 3175TM-FB 3/4" 3175TM-BNL 3/4" Screws: (3) #6 F.H. x 5/8"; (4) #6 F.H. x 1/2" full inset, full wrap, minaret tip full inset, partial wrap, minaret tip 13/16" AE 13/16" G9 AE 13/16" Door Thickness 3175UM-AE Door Thickness 3180UM-AE 3175UM-AE 13/16" 3180UM-G9 13/16" Screws: (3) #6 F.H. x 5/8"; (4) #6 F.H. x 1/2" 3180UM-AE 13/16" B Screws: (2) #6 O.H. x 5/8"; (4) #6 F.H. x 1/2" B 188 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 189

96 full inset, partial wrap, Ball Tip full inset, partial wrap, minaret tip 9/16" 9/16" 9/16" 9/16" G9 14 PB SB 3/4" 3/4" G9 14 BNL PB 3/4" 3/4" 3/4" 3/4" AE BB RBZ WI ORB 3180TB-WI SB AE BB RBZ WI 3180TM-G9 13/16" 13/16" 13/16" 13/16" DAE FB ORB DAE FB 3180TB-G9 3/4" Door Thickness 3180TM-G9 3/4" Door Thickness B B 3180TB- 3/4" 3180TM- 3/4" B B 3180TB-14 3/4" 3180TM-14 3/4" 3180TB-PB 3/4" 3180TM-BNL 3/4" 3180TB-SB 3/4" 3180TM-PB 3/4" 3180TB-AE 3/4" 3180TM-SB 3/4" 3180TB-BB 3/4" 3180TM-AE 3/4" 3180TB-RBZ 3/4" 3180TM-BB 3/4" 3180TB-WI 3/4" 3180TM-RBZ 3/4" 3180TB-ORB 3/4" 3180TM-WI 3/4" 3180TB-DAE 3/4" 3180TM-ORB 3/4" 3180TB-FB 3/4" 9/16" 3180TM-DAE 3/4" Screws: (2) #6 O.H. x 5/8"; (4) #6 F.H. x 1/2" 3180TM-FB 3/4" 9/16" Screws: (2) #6 O.H. x 5/8"; (4) #6 F.H. x 1/2" full inset, partial wrap, minaret tip 3/4" 3/4" full inset, partial wrap 9/16" 9/16" 9/16" 9/16" DAE 13/16" 13/16" 13/16" G9 3/4" 3/4" 3/4" 3/4" Door Thickness 3180UB-DAE Door Thickness 3180T-G9 3180UB-DAE 13/16" Screws: (2) #6 O.H. x 5/8"; (4) #6 F.H. x 1/2" B B 3180T-G9 3/4" Screws: (2) #6 O.H. x 5/8"; (4) #6 F.H. x 1/2" 13/16" 13/16" 13/16" 13/16" B B 190 FUNCTIONAL Hardware DECORATIVE HINGES Amerock 191 B B B B

97 matrix TM face frame concealed matrix TM concealed Features 2-way or 3-way independent adjustability Horizontal adjustment + _ 1/16" Compact design with low protrusion into Cabinet opening Stay open feature Choose from a full range of overlay options and hole patterns Designed and tested to exceed KCMA and BHMA standards Vertical adjustment + _ 1/16" Full wrap for 3/4" frame In-out adjustment + 1/8" C13-14 Hole Pattern 45mm Hole Pattern 48mm Overlay Hole Pattern Cup Depth Opening Angle Adjustment 2811C /4" 45mm 12.8mm 105º 2-way 2811I /8" 48mm 12.8mm 105º 2-way 2811J /2" 45mm 10.8mm 105º 2-way 2811H /4" 45mm 12.8mm 105º 2-way 5/16" ( 8 mm ) DOOR EDGE 5/16" ( 8 mm ) DOOR EDGE 2811K /8" 45mm 12.8mm 105º 2-way 2811L /4" 45mm 10.8mm 105º 2-way /8" 45mm 12.8mm 105º 2-way 1-3/8" ( 35 mm ) 1-3/4" ( 45 mm ) Tab 5/64" - 3/32" ( mm ) 3/8" ( 9.5 mm ) 1-3/8" ( 35 mm ) 1-7/8" ( 48 mm ) Tab 5/64" - 3/32" ( mm ) 3/32" ( 2.5 mm) 2811C /4" 48mm 12.8mm 105º 2-way 2811H /4" 48mm 12.8mm 105º 2-way 2811J /2" 48mm 10.8mm 105º 2-way 2811N /16" 48mm 12.8mm 105º 2-way matrix TM concealed Screws: D packs include 8mm dowels and cup screws; BP packs include all mounting screws (no dowels) 5/16" ( 8 mm ) DOOR EDGE Tab 5/64" - 3/32" ( mm ) 14 A14 1-3/8" ( 35 mm ) 1-3/4" ( 45 mm ) 7105F-A14 3/8" ( 9.5 mm ) 2911C12-14 Overlay Hole Pattern Cup Depth Opening Angle Adjustment Overlay Hole Pattern Cup Depth Opening Angle Adjustment 2911C /4" 48mm 12.8mm 105º 3-way 7105F-A14 1/2" 45mm 105º 3-way Screws: BP packs include all mounting screws (no dowels) 2911C /4" 45mm 12.8mm 105º 3-way 2911J /2" 48mm 10.8mm 105º 3-way 2911J /2" 45mm 10.8mm 105º 3-way Screws: D packs include 8mm dowels and cup screws; BP packs include all mounting screws (no dowels) 192 FUNCTIONAL Hardware concealed HINGES Amerock 193

98 frameless concealed frameless concealed 5/16" ( 8 mm ) DOOR EDGE Tab 5/64" - 3/32" ( mm ) 5/16" ( 8 mm ) DOOR EDGE Tab 5/64" - 3/32" ( mm ) A14 1-3/8" ( 35 mm ) 1-3/4" ( 45 mm ) C14 1-3/8" ( 35 mm ) 1-3/4" ( 45 mm ) 4612-A14 3/8" ( 9.5 mm ) 7125A-C14 3/8" ( 9.5 mm ) Overlay Hole Pattern Cup Depth Opening Angle Adjustment 4612-A14 Half 45mm 110º 3-way Screws: BP packs include all mounting screws (no dowels) Overlay Hole Pattern Cup Depth Opening Angle Adjustment 7125A-C14 Full, Clip on 45mm 125º 3-way Screws: BP packs include all mounting screws (no dowels) /16" ( 8 mm ) 1-3/8" ( 35 mm ) 1-3/4" ( 45 mm ) DOOR EDGE Tab 5/64" - 3/32" ( mm ) 3/8" ( 9.5 mm ) C A-C14 5/16" ( 8 mm ) 1-3/8" ( 35 mm ) 1-3/4" ( 45 mm ) DOOR EDGE Tab 5/64" - 3/32" ( mm ) 3/8" ( 9.5 mm ) Overlay Hole Pattern Cup Depth Opening Angle Adjustment Full 45mm 110º 3-way Screws: BP packs include all mounting screws (no dowels) Overlay Hole Pattern Cup Depth Opening Angle Adjustment 7165A-C14 Full, clip on 45mm 165º 3-way Screws: BP packs include all mounting screws (no dowels) easy on 5/16" ( 8 mm ) DOOR EDGE Tab 5/64" - 3/32" ( mm ) /8" ( 35 mm ) 1-3/4" ( 45 mm ) 4611 A14 3/8" ( 9.5 mm ) CH 14951CH Overlay Hole Pattern Cup Depth Opening Angle Adjustment Overlay 4611 A14 Full 45mm 110º 3-way 14951CH Variable Screws: BP packs include all mounting screws (no dowels) Screws: BP and CM packs include all mounting Screws: D packs do not include screws 194 FUNCTIONAL Hardware concealed HINGES Amerock 195

99 marathon marathon, partial wrap Features Guaranteed performance smooth, quiet and trouble free Locating tabs allow quick positioning on frame Vertical adjustment + _ 1/16" Exceeds 250,000 cycles outperforms conventional knife hinges and KCMA standards Reliable self-closing force outlasts conventional knife hinges Cuts should be made with a #6 dado 9/32" W Horizontal adjustment + 1/16" _ Revolutionary DuraFlex TM action for long life High-strength steel frame wings for overlays 1/4" to 1/2" Full 180 opening BB W Overlay 2603-BB 1/4" 2603-W 1/4" Screws: BP and CM packs include all mounting Screws: D packs do not include screws 2603-BB marathon, full wrap BB W BB 2605-BB 2665L-BB Overlay Overlay 2665L-BB 1/2" 2665R-BB 1/2" 2605-BB 1/4" 2605W-BB 1/4" 2605-W 1/4" Screws: BP and CM packs include all mounting Screws: D packs do not include screws Screws: BP and CM packs include all mounting Screws: D packs do not include screws marathon, partial wrap marathon 14 3 BB W BB W 2606-BB 2604-BB Overlay /2" /2" Inset 2604-BB 3/8" 2604-W 3/8" 2606-BB 1/2" Screws: BP and CM packs include all mounting Screws: D packs do not include screws 2606-W 1/2" Screws: BP and CM packs include all mounting Screws: D packs do not include screws 196 FUNCTIONAL Hardware concealed HINGES Amerock 197

100 roller catches roller catches 2G A2G G Pull Force Length Width Height Strike G 3-6 lbs. 1 3/16" 1 3/8" 9/16" Steel; (2G); 1 5/16" L x 1/4" W x 1/2" H 9714-A2G 3-6 lbs. 1 3/16" 1 3/8" 9/16" Steel; (2G); 1 5/16" L x 1/4" W x 1/2" H Pull Force Length Width Height Strike lbs. 1" 15/16" 1/2" Steel; 1" L x 11/16" W x 3/8" H Screws: (3) #6 T.H. x 1/2" Screws: (4) #6 T.H. x 1/2" 2G 2G G G Pull Force Length Width Height Strike Pull Force Length Width Height Strike G 3-6 lbs. 1 3/16" 1 3/8" 9/16" Steel; (2G); 1 5/16" L x 1/4" W x 1/2" H G 5-6 lbs. Steel Screws: (2) #5 O.H. x 5/8" ; (3) #5 F.H. x 1/2" Screws: (4) #6 T.H. x 1/2" magnetic catches 2G B2G G AW 9753-AW Pull Force Length Width Height Strike G 1 1/4" 1 3/8" 5/8" Steel; (2G); 1" L x 1 3/8" W x 3/8" H 9823-B2G 1 1/4" 1 3/8" 5/8" Steel; (2G); 3/4" L x 1 3/8" W x 3/8" H Screws: (4) #6 T.H. x 1/2" ; Nail (2) #18 F.H. x 1/2" Pull Force Length Width Height Strike 9753-AW 5-10 lbs. 1 1/8" 2" 5/8" Steel; (AE); 1 1/8" L x 3/4" W Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" 198 FUNCTIONAL Hardware catches Amerock 199

101 magnetic catches magnetic catches PT 3PT 3W PT 9765-PT 9773-PT Pull Force Length Width Height Strike 9765-PT 5-11 lbs. 1 15/16" 3/4" 11/16" Steel; (AE); 1 1/8" L x 7/8" W x 3/4" H PT 5-11 lbs. 1 15/16" 3/4" 11/16" Steel; (AE); 1 1/8" L x 7/8" W x 3/4" H Pull Force Length Width Height Strike 9773-PT 5-11 lbs. 2" 1 1/8" 1/2" Steel; (AE); 1 1/8" L x 3/4" W Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" W 5-11 lbs. 1 15/16" 3/4" 11/16" Steel; (AE); 1 1/8" L x 7/8" W x 3/4" H Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" AL 9783-AL PT W 9765F-W Pull Force Length Width Height Strike 9783-AL 5-11 lbs. 2" 1" 5/8" Steel; (AE); 1 1/8" L x 3/4" W Pull Force Length Width Height Strike Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" 9765F-PT 5-11 lbs. 1 15/16" 3/4" 11/16" Steel; (AE); 1 1/8" L x 7/8" W x 3/4" H 9765F-W 5-11 lbs. 1 15/16" 3/4" 11/16" Steel; (AE); 1 1/8" L x 7/8" W x 3/4" H Screws: (4) #6 T.H. x 1/2" ; Nail (1) #15 x 1/2" PT 9793-PT PT 3473-PT Pull Force Length Width Height Strike 9793-PT 6-12 lbs. 2" 3/4" 1/2" Steel; (AE); 1 1/8" L x 3/4" W Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" Pull Force Length Width Height Strike 3473-PT 5-11 lbs. 2" 1 1/8" 1/2" Steel; (AE); 1 1/8" L x 3/4" W Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" 200 FUNCTIONAL Hardware catches Amerock 201

102 magnetic catches Miscellaneous catches AW 2G 9798-AW G Pull Force Length Width Height Strike 9798-AW lbs. 1 1/8" 2" 13/16" Steel; (AE); 1" L x 3/4" W Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" Pull Force Length Width Height Strike G 1 5/16" 1" 1" Steel; 1" L x 7/16" W x 1/4" H Screws: (3) #5 T.H. x 1/2" ; (1) #15 x 1/2" Pull Force Length Width Height Strike 8924-DB Steel Screws: (2) #5 O.H. x 5/8" ; (3) #5 F.H. x 1/2" AL AL Pull Force Length Width Height Strike AL 1 1/2" 13/16" 1/2" Steel; 1 1/4" L x 7/8" W Screws: (2) #6 T.H. x 1/2" ; (1) #5 F.H. x 1/2" 2G G touch catches Pull Force Length Width Height Strike G 3-6 lbs. 1 5/16" 1" 1/2" Steel; 1 1/4" L x 3/8" W x 5/8" H Screws: (4) #6 T.H. x 1/2" BR W P BR Pull Force Length Width Height Strike BR W P1 Screws: (2) #6 T.H. x 5/8" ; (1) #5 F.H. x 1/2" Celebrating Our People... Mike Nicholls Engineer Q: What is the biggest challenge for an engineer at Amerock? A: "Being able to operate and communicate in an ever growing global environment. Also, we need to ensure that our finished product is consistent with the style and quality our design team intended" 202 FUNCTIONAL Hardware catches Amerock 203

103 miscellaneous catches bumper pads A2G 9700-A2G M19 M2 CL Thickness Diameter Shape CL M2 2 Pull Force Length Width Height Strike 9700-A2G 3-6 lbs. 1 5/16" 1" 1/2" Steel; 1 1/4" L x 3/8" W x 5/8" H Screws: (4) #6 T.H. x 1/2" 4000-M19 1 1/16" 11/32" Hexagonal 4014-M2 2 1/16" 11/32" CL 3 5.0mm 1.1mm 1 Note: Self-sticking. 200 per sheet. For use on Cabinets with self-closing hinges 2 Note: Self-sticking. For use on Cabinets with self-closing hinges 3 Note: Item is on a clip strip 4000-M Celebrating Our People... Rob Stevens Product Manager Q: Tell me a little bit about the new display set up A: "To accommodate consumers ever-growing demand for product options, we ve chosen to show multiple finishes on a single board. This idea allows us to convey our wide selection to consumers, while being mindful of the space constraints our retailers face in their locations." Celebrating Our People... Sue Spataro Senior Quality Supervisor 42 Years with Amerock Q: What has been the hardest finish to replicate over the years? A: "Wow! That s a tough one to answer. The harder ones were oxidized and highlighted parts. This was partially due to operators, some liked more dark and some would like items lighter and the true color can t always be seen until the final processes." Celebrating Our People... Jeremy Wein Supply Chain Manager Q: What is your role in helping with the success of our new products? A: "My team helped coordinate getting product ordered and delivered to our Distribution Center, to ensure superior service levels for our customers." 204 FUNCTIONAL Hardware catches Amerock 205

104 sheet metal screws shelf supports Description Qty. Per Case SIDE PANEL BB #6 T.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) SHELF M3 #5 O.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) BB #5 O.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) mm (.394") 5mm (.197") #6 O.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) M3 #6 O.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) Size BB #6 O.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) mm L ORB #6 O.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) #5 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) Note: For use with 5mm holes M26 #5 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) M3 #5 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) BB #5 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) 0.6mm (.024") ORB #5 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) SIDE PANEL #6 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) M3 #6 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) CL 3002-CL SHELF 4mm (.157") 5mm (.197") BB #6 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) ORB #6 F.H. x 1/2" Sheet Metal Screws 2000 (10 bags of 200pcs) Size #6 F.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) 3002-CL M3 #6 F.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) Note: For use with 5mm holes BB #6 F.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) ORB #6 F.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) BB #6 T.H. x 5/8" Sheet Metal Screws 2000 (10 bags of 200pcs) SIDE PANEL machine screws for knobs and Pulls CL 3005-CL SHELF 5mm (.197") Size Description Qty. Per Case 3005-CL G #8-32 T.H. x 1-3/4" Machine Screws 1000 (10 bags of 100pcs) Note: For use with 5mm holes G #8-32 T.H. x 2" Machine Screws 1000 (10 bags of 100pcs) G #8-32 T.H. x 1" Machine Screws 1000 (10 bags of 100pcs) G #8-32 Robertson x 1-1/8" Machine Screws 1000 (10 bags of 100pcs) Z1 #8-32 T.H. x 1-1/2" Machine Screws 1000 (10 bags of 100pcs) G #8-32 T.H. x 1-1/2" Machine Screws 1000 (10 bags of 100pcs) G #8-32 T.H. x 1-5/8" Machine Screws 1000 (10 bags of 100pcs) 206 FUNCTIONAL Hardware accessories Amerock 207

105 series series 5850 Features Self-closing euro style drawer slides 3/4 extension slides provide more stability for optimum performance Bottom or side mount capability Self-closing feature guides the drawer to the fully closed position from slightly outside the cabinet White epoxy coated Features Self-closing euro style drawer slides 3/4 extension slides provide more stability for optimum performance Bottom or side mount capability Self-closing feature guides the drawer to the fully closed position from slightly outside the cabinet Description Material Length Width Height Extension Slide Type W 14" S/C Cold Rolled Steel 14" 1/2" 7/8" 3/4" Euro WS 16" S/C Cold Rolled Steel 16" 1/2" 7/8" 3/4" Euro WS 18" S/C Cold Rolled Steel 18" 1/2" 7/8" 3/4" Euro WS 20" S/C Cold Rolled Steel 20" 1/2" 7/8" 3/4" Euro WS 22" S/C Cold Rolled Steel 22" 1/2" 7/8" 3/4" Euro WS 24" S/C Cold Rolled Steel 24" 1/2" 7/8" 3/4" Euro 17002B-PW Fixed Rear Mtg Bkt Plastic Bracket Please reference page 234 for pack type information Description Material Length Width Height Extension Slide Type 5850C-14-W 14" Cabinet Track Cold Rolled Steel 14" 1/2" 7/8" 3/4" Euro 5850C-16-W 16" Cabinet Track Cold Rolled Steel 16" 1/2" 7/8" 3/4" Euro 5850C-18-W 18" Cabinet Track Cold Rolled Steel 18" 1/2" 7/8" 3/4" Euro 5850C-20-W 20" Cabinet Track Cold Rolled Steel 20" 1/2" 7/8" 3/4" Euro 5850C-22-W 22" Cabinet Track Cold Rolled Steel 22" 1/2" 7/8" 3/4" Euro 5850C-23-W 23" Cabinet Track Cold Rolled Steel 23" 1/2" 7/8" 3/4" Euro 5850C-24-W 24" Cabinet Track Cold Rolled Steel 24" 1/2" 7/8" 3/4" Euro 5850D-14-WS 14" Drawer Rail Cold Rolled Steel 14" 1/2" 7/8" 3/4" Euro 5850D-16-WS 16" S/C Drawer Rail Cold Rolled Steel 16" 1/2" 7/8" 3/4" Euro series 300 Features Side mount ball bearing drawer slides 4 nylon and steel ball bearing rollers within the slides provide smooth, long-lasting operation Fool proof latch provides positive automatic stop and cam action Full extension slides provide easy access to all items in the drawer White epoxy coated 5850D-18-WS 18" S/C Drawer Rail Cold Rolled Steel 18" 1/2" 7/8" 3/4" Euro 5850D-20-WS 20" S/C Drawer Rail Cold Rolled Steel 20" 1/2" 7/8" 3/4" Euro 5850D-22-WS 22" S/C Drawer Rail Cold Rolled Steel 22" 1/2" 7/8" 3/4" Euro 5850ABL-PW Left Adjustable Rear Mtg Bkt Plastic Bracket 5850ABR-PW Right Adjustable Rear Mtg Bkt Plastic Bracket 5850BL-PW Left Fixed Rear Mtg Bkt Plastic Bracket 5850BR-PW Right Fixed Rear Mtg Bkt Plastic Bracket Please reference page 234 for pack type information Description Material Length Width Height Extension Slide Type 316-W 16" Side Mt Cold Rolled Steel 16" 1/2" 3 1/10" Full Ball Bearing Roller 318-W 18" Side Mt Cold Rolled Steel 18" 1/2" 3 1/10" Full Ball Bearing Roller 320-W 20" Side Mt Cold Rolled Steel 20" 1/2" 3 1/10" Full Ball Bearing Roller 322-W 22" Side Mt Cold Rolled Steel 22" 1/2" 3 1/10" Full Ball Bearing Roller Please reference page 234 for pack type information 208 FUNCTIONAL Hardware Drawer Slides Amerock 209

106 series 4000 series 707 Features Tri-roller drawer slides Full extension slides provide easy access to all items in the drawer The lift out disconnect method simplifies drawer removal Available in sets or as individual components Optional self-closing feature guides the drawer to the position fully-closed from slightly outside the cabinet Fast, easy, and economical installation on face frame cabinets Features Center under mount ball bearing drawer slides Ball bearings within the slides provide smooth, long-lasting operation Under mount system allows for maximum drawer width within the cabinet Concealed slide allows for maximum use of drawer opening in cabinet Please note that only one slide is used per drawer Description Material Length Width Height Extension Slide Type Description Material Length Width Height Extension Slide Type G 22" Tri-Roll Cold Rolled Steel 22" 9/20" 47/50" Full Tri-Roller G 22-3/4" Tri-Roll Cold Rolled Steel 22 3/4" 9/20" 47/50" Full Tri-Roller G 22" Tri-Roll Cold Rolled Steel 22" 9/20" 47/50" Full Tri-Roller G Center Under Mount Cold Rolled Steel 14" 1 1/2" 3/8" 3/4" Ball Bearing G Center Under Mount Cold Rolled Steel 18" 1 1/2" 3/8" 3/4" Ball Bearing G Center Under Mount Cold Rolled Steel 22" 1 1/2" 3/8" 3/4" Ball Bearing Please reference page 234 for pack type information GT 22 3/4" Tri-Roll Cold Rolled Steel 22 3/4" 9/20" 47/50" Full Tri-Roller 10500S-2G Front Tand. Rollers Various Bracket 10500A-2G Rear Roller Bkt Various Bracket Please reference page 234 for pack type information series 700 Features Standard type ball bearing side mount drawer slides Ball bearings within the slides provide smooth, long-lasting operation Full extension slides provide easy access to all items in the drawer When closed, the hold-in detent keeps the drawer firmly in place The lever disconnect feature simplifies drawer removal Description Material Length Width Height Extension Slide Type G Standard Type Side Mount Cold Rolled Steel 16" 1/2" 1 3/4" Full Ball Bearing G Standard Type Side Mount Cold Rolled Steel 18" 1/2" 1 3/4" Full Ball Bearing G Standard Type Side Mount Cold Rolled Steel 20" 1/2" 1 3/4" Full Ball Bearing Celebrating Our People... Scott Seman Director of Field Sales Q: What are you hearing from our customers that has led to Amerock s new collections in this catalog? A: "Our customers are more than willing to share their ideas about what is happening in the kitchen and bath arena. Cabinets are getting bigger, consumers want more options to customize their look, quality standards continue to climb, and everyone wants a great product at a great value. Amerock is responding by delivering an unprecedented breadth of design, finish, size and overall fashion options for our customers, wherever and however they want to select our products via the internet, retail stores, showrooms, display boards, catalogs, virtually everywhere style, fashion, finish and design decisions are being made, we are committed to ensuring Amerock is their first choice!" G Standard Type Side Mount Cold Rolled Steel 22" 1/2" 1 3/4" Full Ball Bearing G Standard Type Side Mount Cold Rolled Steel 24" 1/2" 1 3/4" Full Ball Bearing Please reference page 234 for pack type information 210 FUNCTIONAL Hardware Drawer Slides Amerock 211

107 DISPLAYS Towers Display Type Hex Quad Dimensions 31 1/2" W x 84" H 19 1/2" W x 84" H Hex Tower Quad Tower display boards Board Type Dimensions BPD 16" W x 24" H Appliance 15" W x 16 1/2" H Appliance Easel 12" W x 13" H Bath Slat Wall 30" W x 22" H Stainless Steel 1 20" W x 40" H BPD Bath Slat Wall Stainless Steel 2 10" W x 20" H CSM Full 15" W x 5 1/2" H CSM Half 7 1/2" W x 5 1/2" H Allison TM Value Hardware 15" W x 5 1/2" H CSM Full CSM Half Allison TM Value Hardware Amerock 213

108 PRODUCT INDEX Index p.216 Pack Type Information p Amerock 215

109 216 Amerock PRODUCT INDEX Amerock product index product index /4" /4" /4" /4" /4" /16" /2" /8" /4" /8" /2" " " /16" /4" " /2" " " /2" /2" /8" /4" /8" /4" /8" /2" " /2" /16" " /8" /16" /4" " /8" /16" /4" " /8" /16" /4" /2" /4" /2" /4" " " /16" /4" " " /16" /4" /2" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" " /16" /16" /16" /16" A-2G..... CM S-2G..... CM G BP, CM BB..... BP, CM G BP, LD BB..... BP, CM BB CM ABS /4" /4" ART BP " /16" G BP " /16" O BP, D " /16" ORB BP " /16" RB BP " mm mm mm G BP " /2" /8" " O BP, PK " /2" /8" " ORB BP " /2" /8" " ART BP " " /2" " BP " " /2" " G BP " " /2" " O BP, D " " /2" " ORB BP " " /2" " RB BP " mm mm mm G BP " /16" /8" /16" O BP, D " /16" /8" /16" ORB BP " /16" /8" /16" O BP /32" /4" RBZ BP /32" /4" WI BP /32" /4" G BP /32" /4" O BP /32" /4" O BP, CM /32" /4" PWT BP /32" /4" WI BP /32" /4" G BP /16" /16" " O BP /16" /16" " PWT BP /16" /16" " WI BP /16" /16" " O BP " /16" /32" /32" O BP " /16" /32" /32" O BP " /4" /4" /16" WI BP " /4" /4" /16" O BP " /4" /32" " O BP " /4" /32" " O BP " /16" /4" " O BP /4" /16" O BP /4" /16" AB /8" /8" O BP /4" /8" WI BP /4" /8" AB /8" /8" O BP /4" /16" O BP /4" /16" O BP /4" /16" R BP " /32" /2" " BP " /16" /2" " BP " /16" /2" " R BP " /16" /2" " BP " /2" /16" " BP " /2" /16" " G BP " /2" /16" " R BP " /2" /16" " R BP /4" " BP /4" " PWT BP /4" " R BP /4" " BP /4" /16" BP /4" /16" ART BP /4" /16" BP, TPK /4" /16" G BP /4" /16" R BP /4" /16" RBZ BP /4" /16" BP " /4" /32" " BP " /4" /32" " R BP " /4" /32" " R BP " /16" /4" " BP /2" /8" /32" BP /2" /8" /32" R BP /2" /8" /32" R BP /4" /16" BP " /2" /8" /4" AL /4" /16" WHT /4" /16" WHT /8" /16" WPB " A BP /4" " WHT /8" /8" Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page 1304-G BP /16" /32" /32" O BP /16" /32" /32" G BP /16" /8" O BP, PK /16" /8" ART BP /4" /16" BP /4" " G BP /4" /16" O BP, D /4" /16" ORB BP /4" " G BP /8" /16" O BP, PK /8" /16" BP /4", 96mm /3" /5" " ORB BP /4", 96mm /3" /5" " RB BP /4", 96mm /3" /5" " BP ", 128mm " /9" /7" ORB BP ", 128mm " /9" /7" RB BP ", 128mm " /9" /7" BP /4", 160mm /4" /2" /7" ORB BP /4", 160mm /4" /2" /7" RB BP /4", 160mm /4" /2" /7" BP " /5" " " ORB BP " /5" " " RB BP " /5" " " BP " /4" /7" /4' ORB BP " /4" /7" /4" RB BP " /4" /7" /4" W BP /8" /16" A BP /8" /16" DAW BP /8" /16" DB BP /8" /16" DG BP /8" /16" DN BP /8" /16" DW BP /8" /16" W BP /8" /16" W BP /8" /16" DAW BP /8" /16" DB BP /8" /16" DG BP /8" /16" DN..... BP, TEN /8" /16" DW BP /8" /16" W BP /8" /16" A BP /8" /16" G BP " /2" /16" /8" O BP, CM " /2" /16" /8" RBZ BP " /2" /16" /8" WI BP " /2" /16" /8" O BP " /4" /8" " O BP, CM " /4" /8" " RBZ BP " /4" /8" " WI BP " /4" /8" " G BP, CM " /8" /4" " O74... BP, CM, D, PK " /8" /4" " O BP, CM " /8" /4" " PWT BP " /8" /4" " WI BP " /8" /4" " G BP " /4" /8" /16" O BP " /4" /8" /16" O BP, CM " /4" /8" /16" O BP /32" /4" RBZ BP /32" /4" WI BP /32" /4" G BP /32" /4" BP " /16" BP /4" " BP /4" " BP /4" /8" CBB BP /4" /8" CSG BP /4" /8" BP /4" ORB..... BP /4" WCH /16" /8" CH /4" /16" SCH /16".... 7/8" SCH /16" /8" SCH /16" " /16" BP /4" /16" /4" BNB BP /4" /16" /4" BP /4" /16" /4" ORB BP /4" /16" /4" PB " /4" /8" BP /8" /8" BP " /8" /8" /16" BP " /8" /8" /16" BP /2" /8" /8" /16" BP " /8" /8" /4" AE BP " /8" /8" /4" BNB BP " /8" /8" /4" BP " /8" /8" /4" BP " /16" /2" /16" BP / BP / / / /8" /6" BP /16" BP /4" /16" BP /4" /16" O BP /4" /16" ORB BP /4" /16" PWT BP /4" /16" R BP /4" /16" R BP /4" /16" WC BP /4" /16" WID BP /4" /16" WN BP /4" /16" CP BP, PK " /4" /8" /16" O BP " /4" /8" /16" PWT BP " /4" /8" /16" R BP " /4" /8" /16" CP BP " & 96mm /8" " /16" G BP " & 96mm /8" " /16" O BP " & 96mm /8" " /16" ORB BP " & 96mm /8" " /16" PWT BP " & 96mm /8" " /16" R BP " & 96mm /8" " /16" CP BP " & 96mm /8" /16" /32" CP BP, PK /2" /16" /8" PWT BP /2" /16" /8" CP BP /8" /4" G BP /8" /4" O BP /8" /4" PWT BP /8" /4" R BP /8" /4" CH /4" AE BP, CM " /4" /8" /16" AE BP, CM " /8" /2" " The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service.

110 218 Amerock PRODUCT INDEX Amerock product index product index 156-AE BP " /8" " /4" EB BP " /8" /16" " BP " /2" /8" " ORB BP " /8" /16" " R BP " /8" /16" " WID BP " /8" /16" " WN BP " /8" /16" " EB BP /7" /7" BP /7" /7" ORB..... BP /7" /7" WN..... BP /4" EB BP /4" /8" BP /4" " ORB BP /4" /8" R BP, PK /4" /8" WID.....BP, CDK /4" /8" WN BP /4" /8" EB BP " /4" /8" " ORB BP " /4" /8" " R BP " /4" /8" " WID BP " /4" /8" " WN BP " /4" /8" " EB BP /8" /16" /16" ORB BP /8" /16" /16" R BP /8" /16" /16" WID BP /8" /16" /16" WN BP /8" /16" /16" ART BP " /8" /16" /4" FB BP " /8" /16" /4" BP " /8" /16" /4" ORB BP " /8" /16" /4" RB BP " /8" /9" /4" WID BP " /8" /16" /4" WN BP " /8" /16" /4" E /4" /4" ORB..... E /4" /4" WID..... BP /4" /4" ART BP /4" /16" FB BP /4" /16" BP, TPK /4" /16" ORB.....BP, TPK /4" /16" RB BP mm mm WID BP /4" /16" WN BP /4" /16" FB BP /4" /4" BP /4" /4" ORB..... BP /4" /4" WN..... BP /4" /4" ART BP /8" " FB BP /8" " BP, CDK /8" " ORB.....BP, TPK /8" " R BP /8" " RB BP mm mm WC BP /8" " WID BP /8" " WN BP /8" " FB BP mm /7" /3" " BP mm /7" /3" " ORB BP mm /7" /3" " WN BP mm /7" /3" " FB BP mm /2" /4" " BP " /6" /7" /7" ORB BP " /6" /7" /7" WID BP " /6" /7" /7" AE BP, CM " /2" /8" " G BP " & 96mm /16" /2" /16" PWT BP " & 96mm /16" /2" /16" R BP " & 96mm /16" /2" /16" G BP /8" /8" PWT BP /8" /8" R BP /8" /8" PWT BP " & 96mm /16" /16" " PWT BP /4" /16" O BP " & 96mm /8" /16" " C-AE BP " /2" " " SS BP " /32" /8" /16" SS BP mm, 3 3/4" /16" /8" /16" SS BP mm, 5" /32" /8" /32" SS BP mm, 6 1/4" /8" /8" /4" SS BP mm, 7 1/2" /8" /4" SS BP " /2" SS BP mm, 1 3/16" SS BP /4" SS BP mm, 1 15/ /8" CS-G BP " SS BP " CS-.... BP mm, 3 3/4" mm, 6" mm, 15/32" mm, 1 3/8" SS BP mm, 3 3/4" mm, 6" mm, 15/32" mm, 1 3/8" SS BP mm, 7 1/2" mm, 9 3/4" mm, 15/32" mm, 1 3/8" SS BP mm, 10" mm, 13" mm, 15/32" mm, 1 3/8" ORB..... BP /5" /4" /2" /8" SS BP mm, 12 1/2" mm, 15 5/8" mm, 15/32" mm, 1 3/8" ORB..... BP /8" /2" /2" /8" SS BP mm, 16 1/4" mm, 19 11/32"... 12mm, 15/32" mm, 1 3/8" ORB..... BP /9" " /2" /8" SS BP mm, 18 3/4" mm, 21-27/32"... 12mm, 15/32" mm, 1 3/8" ORB..... BP /7" /7" /2" /8" SS BP mm, 21 7/32" mm, 24 11/32"... 12mm, 15/32" mm, 1 3/8" ORB..... BP /5" /3" /2" /8' SS BP mm, 25" mm, 28 1/16"... 12mm, 15/32" mm, 1 3/8" ORB..... BP /4" /5" /2" /8" SS BP mm, 30" mm, 33 1/16"... 12mm, 15/32" mm, 1 3/8" BP " /2" /8" /8" PB BP " /2" /8" /8" BP /4" /8" D BP /4" /8" BN BP /4" /8" BP /4" /8" PB BP /4" /8" BP mm, 5" mm, 1/2" mm, 1 9/32" WN BP mm, 5" mm, 1/2" mm, 1 9/32" BP mm, 5" mm, 6 1/4" mm, 13/16" mm, 1 3/16" WN BP mm, 5" mm, 6 1/4" mm, 13/16" mm, 1 3/16" BP, D mm, 3 3/4" mm, 5 1/4" mm, 1/2" mm, 1" WID..... BP mm, 3 3/4" mm, 5 1/4" mm, 1/2" mm, 1" WN BP mm, 3 3/4" mm, 5 1/4" mm, 1/2" mm, 1" BP mm, 5" mm, 6 1/4" mm, 3/4" mm, 1 1/8" WN BP mm, 5" mm, 6 1/4" mm, 3/4" mm, 1 1/8" BP mm, 5" mm, 7 13/16"... 30mm, 1 3/16" mm, 1 3/16" WN BP mm, 5" mm, 7 13/16"... 30mm, 1 3/16" mm, 1 3/16" BP mm, 5" mm, 6 1/32" mm, 23/32" mm, 1 3/16" WN BP mm, 5" mm, 6 1/32" mm, 23/32" mm, 1 3/16" BP /8" " BP mm /2" /4" " ORB BP mm /2" /4" " WN BP mm /2" /4" " FB BP mm /3" /4" /5" BP mm /3" /4" /5" ORB BP mm /3" /4" /5" WN BP mm /3" /4" /5" ART BP " /8" /16" " FB BP " /8" /16" " BP, TPK " /8" /16" " ORB BP " /8" /16" " R BP " /8" /16" " WC BP " /8" /16" " WID BP " /8" /16" " WN BP " /8" /16" " FB BP " /4" /8" " BP " /4" /8" " ORB BP " /4" /8" " WID BP " /4" /8" " FB BP /8" /16" /16" BP /8" /16" /16" ORB BP /8" /16" /16" ABS /2" " CB BP / / CB BP / / CB BP / / AE BP / AE BP / / / W..... C /2" /8" WS.... C /2" /8" WS.... C /2" /8" WS.... C /2" /8" WS.... C /2" /8" WS.... C /2" /8" B-PW..... C CH " " /16" /32" " /4" /16" " " /8" /16" " LB " /8" /16" " SCH " /8" /16" " CH " /8" /16" " " /8" /16" " ORB " /8" /16" " PB " /8" /16" " CH " /16" /16" " " /16" /16" " ORB " /16" /16" " SCH " /16" /16" " AE BP, CM " /4" /8" /8" C-AE BP, PK " /4" /8" /8" BP mm /7" /7" /9" ORB BP mm /7" /7" /9" WID BP mm /7" /7" /9" BP mm /8" /7" /4" ORB BP mm /8" /7" /4" WID BP mm /8" /7" /4" BP mm /5" /7" /3" ORB BP mm /5" /7" /3" WID BP mm /5" /7" /3" BP " /7" /7" " ORB BP " /7" /7" " WID BP " /7" /7" " ORB..... BP /8" " R BP /8" " WID..... BP /8" " WN BP /8" " ORB..... BP /8" " WID..... BP " " /16" BP " /8" " /16" ORB..... BP " /8" " WID..... BP " /8" " /16" WN BP " /8" " /16" W BP /2" /4" BP R BP WC BP WID..... BP WN BP BP " /8" /32" /8" R BP " /8" /32" /8" WC BP " /8" /32" /8" WID..... BP " /8" /32" /8" WN BP " /8" /32" /8" BP /4" WID..... BP /4" WN BP /4" BP " WID..... BP " WN BP " BP " WID..... BP " WN BP " PB..... BP /4" CCB..... BP /4" PB..... BP " CCB..... BP " BP /4" D..... BP /4" BP /4" BP " D..... BP " BP " BP, CDK " /2" /16" " WID..... BP " /2" /16" " WN BP " /2" /16" " PBOK..... BP " /8" /4" /8" BP mm, 5" mm, 6" mm, 3/8" mm, 1/8" ORB..... BP mm, 5" mm, 6" mm, 3/8" mm, 1/8" R BP mm, 5" mm, 6" mm, 3/8" mm, 1/8" WC BP mm, 5" mm, 6" mm, 3/8" mm, 1/8" WID..... BP mm, 5" mm, 6" mm, 3/8" mm, 1/8" WN BP mm, 5" mm, 6" mm, 3/8" mm, 1/8" W BP /2" " RIN..... BP mm, 3 1/8" /4" /8" ROB..... BP mm, 3 1/8" /4" /8" RIN..... BP mm, 5" " /4" " ROB..... BP mm, 5" " /4" " FB BP mm, 1 5/16"...2 1/8" ORB..... BP mm, 1 5/16"...2 1/8" R BP mm, 1 5/16"...2 1/8" WN BP mm, 1 5/16"...2 1/8" ART..... BP mm, 2 9/16" /8" /2" FB BP mm, 2 9/16" /8" /2" ORB..... BP mm, 2 9/16" /8" /2" The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

111 220 Amerock PRODUCT INDEX Amerock product index product index R BP mm, 2 9/16" /8" /2" RB BP mm, 2 9/16" /8" /2" WN BP mm, 2 9/16" /8" /2" ART..... BP " /6" /16" /8" FB BP " /6" /16" /8" ORB..... BP " /6" /16" /8" R BP " /6" /16" /8" RB BP " /6" /16" /8" WN BP " /6" /16" /8" FB BP mm, 3 3/4" /8" /2" " ORB..... BP mm, 3 3/4" /8" /2" " R BP mm, 3 3/4" /8" /2" " WN BP mm, 3 3/4" /8" /2" " FB BP mm, 6 1/4" /4" " " ORB..... BP mm, 6 1/4" /4" " " R BP mm, 6 1/4" /4" " " WN BP mm, 6 1/4" /4" " " BP /4" " D BP /4" " AE BP /4" " B BP /4" " BNB BP /4" " BRB BP /4" " BP /4" " H BP /4" " H-26D..... BP /4" " H-AE BP /4" " H-B BP /4" " H-BNB..... BP /4" " H BP /4" " NBZ BP /4" " ORB BP /4" " B BP " /8" /8" /16" BNB BP " /8" /8" /16" BP " /8" /8" /16" BNB BP /2" /8" /8" /16" BP /2" /8" /8" /16" CS-G BP mm, 5" mm, 7 7/16" mm, 15/32" mm, 1 3/8" SS BP mm, 5" mm, 7 7/16" mm, 15/32" mm, 1 3/8" BC BP /4" /16" BC BP " /16" /16" /16" NBZ BP " /16" /16" /16" BP /4" /16" BNB BP /4" /16" BP " /16" /16" /4" BNB BP " /16" /16" /4" BNB BP /2" /2" /16" /4" BP mm /2" /16" /16" D BP mm /2" /16" /16" BNB BP mm /2" /16" /16" BP mm /2" /16" /16" BP mm, 3 3/4" /8" /16" /16" BLK /2" " BON /2" " HGR /2" " WHT /2" " DEL /2" /16" WHT /2" /16" WHT /4" /16" WHT " WHT /4" " AE BP, CM / / / SN BP mm mm mm mm VS BP mm mm mm mm DBS..... BP mm mm DOB..... BP /3" /7" RB BP mm mm SN BP mm mm WNC..... BP mm mm DBS..... BP mm mm mm mm DOB..... BP mm /5" /7" /7" RB BP mm mm mm mm SN BP mm mm mm mm WNC..... BP mm mm mm mm FWP /4" " WPB /4" " BP " /16" /4" /4" AE BP " /16" /4" /4" FWP " /16" /4" /4" OLB " /16" /4" /4" WAB " /16" /4" /4" WPB " /16" /4" /4" LB " /2" /8" " PB " /2" /8" " " /8" /8" " LB " /8" /8" " PB " /8" /8" " SCH " /8" /8" " PB " /16" /8" " SCH " /16" /8" " PB /4" /8" LB /4" /8" PB /4" /8" BB CM W CM BB CM W CM BB CM W CM W-BB..... CM CM CM BB..... BP, CM W CM BP " /2" /8" /8" BP " /2" /8" /8" ORB..... BP " /2" /8" /8" R BP " /2" /8" /8" WN BP " /2" /8" /8" BP " " /8" BP " " /8" ORB..... BP " " /8" R BP " " /8" WN BP " " /8" BP /8" /8" /8" /8" BP " /2" /4" /16" BP " /2" /4" /16" ORB..... BP " /2" /4" /16" R BP " /2" /4" /16" WN BP " /2" /4" /16" BP /2" " /8" BP " /8" /8" ORB.... BP " /8" /8" RB..... BP " /8" /8" AE..... BP, CM, LL / / PWT BP /4" /8" PWT BP " /8" /8" /8" B BP " /16" /4" /32" G BP " /16" /4" /32" O BP " /16" /8" /16" PWT BP " /16" /8" /16" R BP " /16" /8" /16" B BP " & 96mm /32" /32" /32" AN BP mm mm SN BP mm mm WNC..... BP mm mm AN BP mm mm mm mm SN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm SN BP mm mm WNC..... BP mm mm AN BP mm mm mm mm SN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm mm mm SN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm WNC..... BP mm mm AN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm SN BP mm mm WNC..... BP mm mm AN BP mm mm SN BP mm mm WNC..... BP mm mm AN BP mm mm mm mm SN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm mm mm SN BP mm mm mm mm WNC..... BP mm mm mm mm SS BP mm mm mm mm SN BP mm mm mm mm SS BP mm mm mm mm SS BP mm mm mm mm SS BP mm mm mm mm SN BP mm mm mm mm SN BP mm mm mm mm AN BP mm mm MBB..... BP mm mm SS BP mm mm SN BP mm mm WNC..... BP mm mm AN BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm WNC..... BP mm mm AP BP mm mm SN BP mm mm VS BP mm mm AP BP mm mm mm mm BP /2" " /8" ORB..... BP /2" " /8" R BP /2" " /8" RB BP /2" " /8" WN BP /2" " /8" BP mm, 2 1/2" /8" /8" /8" D..... BP mm, 2 1/2" /8" /8" /8" BP mm, 2 1/2" /8" /8" /8" BP " " " D..... BP " " " BP " " " BP " /2" " /8" BP " /2" " /8" O BP " /2" " /8" ORB..... BP " /2" " /8" PN BP " /2" " /8" WN BP " /2" " /8" BP " " /8" BP " " /8" O BP " " /8" ORB..... BP " " /8" PN BP " " /8" WN BP " " /8" BP " /8" /8" /8" EB BP " /8" /8" /8" BP " /8" /8" /8" ORB..... BP " /16" /8" /8" WN BP " /8" /8" /8" BP /8" /16" /16" EB BP /8" /16" /16" BP /8" /16" /16" ORB..... BP /8" " /8" WN BP /8" /16" /16" BP " /8" /16" " D..... BP " /8" /16" " BP " /8" /16" " BP mm, 3 3/4" /16" /2" /8" D..... BP mm, 3 3/4" /16" /2" /8" BP mm, 3 3/4" /16" /2" /8" BP /4", 96mm " /9" " ORB..... BP /4", 96mm " /9" " PN BP /4", 96mm " /9" " BP ", 128mm /4" /9" " ORB..... BP ", 128mm /4" /9" " PN BP ", 128mm /4" /9" " BP /7" /7" /4" ORB.... BP /7" /7" /4" PN..... BP /7" /7" /4" SS BP mm mm BP " mm, 5 1/4" mm, 3/8" mm, 1" SS BP mm, 3 3/4" mm, 4 3/8" mm, 3/8" mm, 1 1/4" BP /4" /7" /2" /8" BP /4" " /2" /4" BP " " /7" /3" BP " " /7" /3" BP " " /7" /4' WCH /4" /8" WPB /4" /8" WCH " " /4" /4" BH /5" /3" " BH /5" /3" " ORB..... BH /5" /3" " The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

112 222 Amerock PRODUCT INDEX Amerock product index product index BH /7" /2" " BH /7" /2" " ORB..... BH /7" /2" " BH /9" /6" " BH /9" /6" " ORB..... BH /9" /6" " BH " /4" /6" " BH " /4" /6" " ORB..... BH " /4" /6" " BH " /4" /6" " BH " /4" /6" " ORB..... BH " /4" /6" " BH " /4" " /3" BH " /4" " /3" ORB..... BH " /4" " /3" BH /6" /3" " BH /6" /3" " ORB..... BH /6" /3" " ORB..... BH /8" /8" " PN BH /8" /8" " ORB..... BH /5" /9" " PN BH /5" /9" " ORB..... BH /7" /8" /9" PN BH /7" /8" /9" ORB..... BH " /3" /3" " PN BH " /3" /3" " ORB..... BH " /3" /3" " PN BH " /3" /3" " ORB..... BH /3" /7" /5" PN BH /3" /7" /5" ORB..... BH /9" /5" /3" ORB..... BH /6" /3" /9" ORB..... BH " /9" /7" ORB..... BH " /4" /5" /3" ORB..... BH " /4" /5" /3" BH /8" /5" /8" BH /6" /3" /9" BH " /5" /7" BH " /2" /5" /8" BH " /2" /5" /8" BH /5" /9" /9" SS BH /4" " /4" SS BH /8" " /7" SS BH " /4" " SS BH " " " /5" SS BH " /9" " /3" SS BH " /9" " " SS BH " /5" " /4" OPB /4" " L-BB D R-BB D OPB " " /4" /4" R BP /4" " " WID..... BP /4" " " WN BP /4" " " ART..... BP " " /8" " BP " " /8" " WN BP " " /8" " WNC..... BP " " /8" " ART..... BP /8" /8" " BP, D /8" /8" " WN BP /8" /8" " BP mm mm mm mm ORB..... BP mm mm mm mm BP mm mm mm mm ORB..... BP mm mm mm mm BP mm mm mm ORB..... BP mm mm mm CM CM CL CM CL CM CL..... CM BP /8" /8" D..... BP " /16" /2" /8" D..... BP /4" /2" BP /4" /2" W C /2" /10" TB-AE.... CM, PK TB-BNL.... CM TB-DAE... CM, PK TB-FB..... PK TB PK TB-G9.... CM, PK TB-ORB.... D, PK TB-PB.... CM, PK TB-RBZ..... PK TB-SB..... PK TB-WI.... CM, D, PK TM CM TM-AE.... CM, PK TM-BB..... CM TM-BNL.... CM TM-DAE... CM, PK TM-FB.... CM, PK TM-.... PK TM-G9.... CM, PK TM-ORB.... PK TM-PB.... CM, PK TM-RBZ.... PK TM-WI.... CM, PK UM-AE..... PK RM-AE..... CM TB PK TB-AE.... CM, PK TB-BB..... PK TB-DAE... CM, PK TB-FB..... PK TB PK TB-G9.... CM, PK TB-ORB.... PK TB-PB.... CM, PK TB-RBZ..... PK TB-SB..... PK TB-WI.... CM, PK T-G PK TM PK TM-AE.... CM, PK TM-BB..... CM TM-BNL.... CM TM-DAE... CM, PK TM-FB..... PK TM-.... PK TM-G9.... CM, PK WNC..... BP /8" /8" " EB BP /8" /8" " ORB..... BP /8" /8" " WN BP /8" /8" " ORB..... BP /8" /8" " R BP /8" /8" " WID..... BP /8" /8" " BP mm, 3 3/4" /8" /2" /8" AA BP mm, 3 3/4" /8" /2" /8" BP mm, 3 3/4" /8" /2" /8" BP mm, 5" /8" /8" /8" AA BP mm, 5" /8" /8" /8" BP mm, 5" /8" /8" /8" BP /8" /8" " AA BP /8" /8" " BP /8" /8" " BP " /8" /4" " AA BP " /8" /4" " BP " /8" /4" " BP mm, 3 3/4" /4" /4" " AA BP mm, 3 3/4" /4" /4" " BP mm, 3 3/4" /4" /4" " BP mm, 5" /2" /4" " AA BP mm, 5" /2" /4" " BP mm, 5" /2" /4" " ART..... BP " /4" /4" /8" BP " /4" /4" /8" ORB..... BP " /4" /4" /8" WN BP " /4" /4" /8" ART..... BP /4" /4" " BP /4" /4" " ORB..... BP /4" /4" " WN BP /4" /4" " ORB..... BP /4" /4" /4" " R BP /4" /4" /4" " WN BP /4" /4" /4" " ORB..... BP " /2" /2" /8" R BP " /2" /2" /8" WN BP " /2" /2" /8" R BP " /2" " " WID..... BP " /2" " " WN BP " /2" " " EB BP " " /8" " ORB..... BP " " /8" " WN BP " " /8" " BP C D C BP, D H D H BP I BP, D J D J BP, D K BP L BP N D C D C D J D J D BP mm mm mm mm ORB..... BP mm mm mm mm TM-ORB.... PK TM-PB.... CM, PK TM-RBZ.... PK TM-SB..... CM TM-WI.... CM, PK UB-DAE.... CM UM-AE..... CM UM-G CM W C /2" /10" W C /2" /10" W C /2" /10" P D BR..... BP, LL W BP AL..... BP, LL AC BP /4" /16" " /4" CB BP /4" /16" " /4" AC BP /4" /4" CB BP /4" /4" AC BP, LL / / / CB BP, LL CB BP / / AC BP / / / CB BP AE BP /2" /8" BP /2" /8" BP /2" /8" BP /4" /4" BP /4" /4" BP /4" /16" /4" /16" BP /4" /16" /4" /16" BP " " /16" /4" BP " " /16" /4" BP, LL / / BP, LL BP, LL ORB BP BB BP " /4" " " BB BP " /2" /4" " BB BP /4" " BB BP " " /2" " BB BP " /4" /2" /2" BB BP " /4" /8" /8" BB BP /8" /8" BP, M, LL / / BP / / BB..... BP, M, LL / / BP, LL / / BP, LL / / ORB..... BP, LL / / ORB..... BP, LL / / W BP / / BP / / / BP, M, TN, LL / / / BB.... BP, M, TN, LL / / / BP, LL / / / BP, LL / / / ORB..... BP, LL / / / ORB..... BP, LL / / / W BP / / / AC BP /2" /16" AC BP " /4" /2" /16" The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

113 224 Amerock PRODUCT INDEX Amerock product index product index 3435-AC BP / / AC BP BP " /8" /16" /16" BB BP " /8" /16" /16" GW BP " /8" /16" /16" MB BP " /8" /16" /16" BP, CM /16" /8" BB BP /16" /8" GW BP /16" /8" MB BP /16" /8" BP /16" /16" /8" BB BP /16" /16" /8" GW BP /16" /16" /8" AE BP /8" /4" AE BP /16" " AE BP " /16" /16" /8" AE BP " " /16" /8" G BP, LL G BP PT BP " /16" /2" BP, LL NBZ BP /16" /8" NBZ BP " /8" /8" /16" NBZ BP /16" /16" G BP, CM M CM M CM G C /20" /50" G CM /20" /50" G C / /20" /50" GT CM / /20" /50" ORB..... BP " /8" /2" /8" ORB..... BP mm mm mm mm ORB..... BP mm mm mm mm ORB..... BP mm, 7 1/2" mm mm mm ORB..... BP mm, 10" mm mm mm ABS /4" /8" " /8" BL /4" /8" " /8" BP " /4" /4" /4" B BP " /4" /4" /4" BNB BP " /4" /4" /4" G BP " /4" /4" /4" ORB BP " /4" /4" /4" WID BP " /4" /4" /4" WN BP " /4" /4" /4" BP /16" " R BP /16" " WC BP /16" " WID BP /16" " WN BP /16" " B BP " /16" /4" /8" BP " /16" /4" /8" WID BP " /16" /4" /8" BNB BP mm /8" /2" " BP " & 96mm /8" /4" " BN BP " & 96mm /4" /8" /4" BP /4" /2" PWT BP " /8" /16" /16" PWT BP /4" " PWT BP " " /16" /16" PWT BP /4" " BP " /8" /5" /8" WC BP " WID BP " WN BP " BP /8" PWT BP /8" WC BP /8" WID BP /8" WN BP /8" FB BP mm, 1 1/2" BP mm, 1 1/2" FB BP mm, 3 3/4" BP mm, 3 3/4" BP mm, 3 3/4" WN BP mm, 3 3/4" FB BP mm, 3 3/4" BP mm, 3 3/4" G BP " PWT BP " WID BP " WN BP " G BP /8" PWT BP /8" WN BP /8" R BP mm, 3 3/4" RBZ BP mm, 3 3/4" WID BP mm, 3 3/4" WN BP mm, 3 3/4" R BP mm, 3 3/4" mm, 4 3/4" mm, 1" mm, 1 3/32" RBZ BP mm, 3 3/4" mm, 4 3/4" mm, 1" mm, 1 3/32" WID BP mm, 3 3/4" mm, 4 3/4" mm, 1" mm, 1 3/32" WN BP mm, 3 3/4" mm, 4 3/4" mm, 1" mm, 1 3/32" R BP /4" RBZ BP /4" WID BP /4" WN BP /4" R BP /4" RBZ BP /4" WID BP /4" WN BP /4" A BP C BP D BP ABS /16".... 3/4" BL /16".... 3/4" G BP " /4" /4" " PWT BP " /4" /4" " G BP /4" /8" PWT BP /4" /8" R BP " " /8" /8" WC BP " " /8" /8" WID BP " " /8" /8" WN BP " " /8" /8" R BP /4" /8" WC BP /4" /8" WID BP /4" /8" WN BP /4" /8" G BP /4" /4" WID BP /4" /4" WN BP /4" /4" G BP " /8" /8" /8" WID BP " /8" /8" /8" WN BP " /8" /8" /8" ORB BP " /8" /16" /8" R BP " /8" /16" /8" RBZ BP " /8" /16" /8" WI BP " /8" /16" /8" BP /4" /8" ORB BP /4" /8" R BP /4" /8" RBZ BP /4" /8" WI BP /4" /8" R BP " " /8" /16" RBZ BP " " /8" /16" WI BP " " /8" /16" R BP /4" /8" RBZ BP /4" /8" WI BP /4" /8" R BP " /8" /16" /16" RBZ BP " /8" /16" /16" WI BP " /8" /16" /16" R BP /8" /8" RBZ BP /8" /8" WI BP /8" /8" EB BP " WC BP " WN BP " EB BP " WC BP " WN BP " PWT BP " PWT BP " R BP " RBZ BP " WID BP " WN BP " PWT BP /2" /4" R BP /2" /4" RBZ BP /2" /4" WID BP /2" /4" WN BP /2" /4" R BP " WC BP " WID BP " WN BP " R BP /8" /8" WC BP /8" /8" WID BP /8" /8" WN BP /8" /8" EB BP " WC BP " WID BP " WN BP " EB BP /8" /8" WC BP /8" /8" WID BP /8" /8" WN BP /8" /8" GPT BP " PWT BP " WN BP " GPT BP /4" /4" PWT BP /4" /4" WN BP /4" /4" BP " PWT BP " BP mm BP mm BP mm BP mm BP mm BP mm BP mm BP mm BP mm BP mm BP mm BP /4" /8" BP /4" /8" BB BP /4" /8" FB BP /4" /8" BP /4" /8" BP /4" /8" BP /4" /8" BB BP /4" /8" FB BP /4" /8" BP /4" /8" ORB..... BP /4" /8" BP /16" " BP /16" " BB BP /16" " FB BP /16" " BP, TEN /16" " ORB..... BP /16" " BP mm /4" /8" /8" /16" BP mm /4" /8" /8" /16" BB BP mm /4" /8" /8" /16" FB BP mm /4" /8" /8" /16" BP, TEN mm /4" /8" /8" /16" ORB..... BP mm /4" /8" /8" /16" BP mm /4" /8" /8" BP mm /4" /8" /8" BB BP mm /4" /8" /8" FB BP mm /4" /8" /8" BP mm /4" /8" /8" ORB..... BP mm /4" /8" /8" BP /4" /8" BP /4" /8" BB BP /4" /8" FB BP /4" /8" BP, TEN /4" /8" ORB..... BP /4" /8" BP " /8" /8" BP " /8" /8" BB BP " /8" /8" FB BP " /8" /8" BP " /8" /8" ORB..... BP " /8" /8" BP " /8" /8" " BP " /8" /8" " BB BP " /8" /8" " FB BP " /8" /8" " BP " /8" /8" " BP " /8" /8" " BP " /8" /8" " BB BP " /8" /8" " FB BP " /8" /8" " BP " /8" /8" " The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

114 226 Amerock PRODUCT INDEX Amerock product index product index BP " /8" /8" /4" BN BP " /8" /8" /4" EB BP " /8" /8" /4" FB BP " /8" /8" /4" BP " /8" /8" /4" BP " /8" /4" /4" BB BP " /8" /4" /4" BN BP " /8" /4" /4" EB BP " /8" /4" /4" FB BP " /8" /4" /4" BP " /8" /4" /4" BP /4" /8" BP /4" /8" BN BP /4" /8" EB BP /4" /8" FB BP /4" /8" BP /4" /8" ORB..... BP /4" /8" BP /4" /8" BP /4" /8" BB BP /4" /8" BN BP /4" /8" EB BP /4" /8" FB BP /4" /8" BP /4" /8" BP " /8" /2" /2" BB BP " /8" /2" /2" BN BP " /8" /2" /2" EB BP " /8" /2" /2" FB BP " /8" /2" /2" BP " /8" /2" /2" ORB..... BP " /8" /2" /2" BP /8" /8" /8" BP /8" /8" /8" BN BP /8" /8" /8" EB BP /8" /8" /8" FB BP /8" /8" /8" BP /8" /8" /8" ORB..... BP /8" /8" /8" BP /4" " BP /4" " BN BP /4" " EB BP /4" " FB BP /4" " BP /4" " ORB..... BP /4" " BP " /4" /4" /4" FB BP " /4" /4" /4" BP " /4" /4" /4" WI BP /4" /8" WN BP /4" /8" BP /8" " /8" BP /8" " /8" EB BP /8" " /8" FB BP /8" " /8" BP, TEN /8" " /8" ORB..... BP /8" " /8" BP /2" /8" /8" BB BP /2" /8" /8" FB BP /2" /8" /8" BP /2" /8" /8" R BP /2" /8" /8" WN BP " /8" /16" /8" WNC..... BP " /8" /16" /8" ART..... BP /4" /9" /8" /4" ORB..... BP mm, 3 3/4" /16" /8" /4" WN BP mm, 3 3/4" /16" /8" /4" WNC..... BP mm, 3 3/4" /16" /8" /4" AN BP mm mm mm mm DBS..... BP mm mm mm mm WNC..... BP mm mm mm mm AN BP mm mm DBS..... BP mm mm WNC..... BP mm mm AN BP mm mm mm mm SN BP mm mm mm mm AN BP mm mm SN BP mm mm SBK..... BP ", 76mm mm mm mm SN BP ", 76mm mm mm mm SBK..... BP mm mm SN BP mm mm BP /16" " /8" BP /16" " BP /2" /8" BC BP /2" /8" BC..... BP, TEN /2" /8" BJ..... BP, TEN /2" /8" GC BP /2" /8" BP " /16" /16" /4" BP " /16" /16" /4" BB BP " /16" /16" /4" EB BP " /16" /16" /4" FB BP " /16" /16" /4" BP " /16" /16" /4" ORB..... BP " /16" /16" /4" WN BP " /16" /16" /4" BP /4" /8" BB BP /4" /8" EB BP /4" /8" FB BP /4" /8" BP /4" /8" ORB..... BP /4" /8" WN BP /4" /8" BP ", 128mm /7" /6" /4" ORB..... BP ", 128mm /7" /6" /4" BP /4", 160mm /6" /8" /7" ORB..... BP /4", 160mm /6" /8" /7" BP " /6" /5" /5" ORB..... BP " /6" /5" /5" BP " /9" /9" /9" ORB..... BP " /9" /9" /9" BP " /4" /4" " ORB..... BP " /4" /4" " BP /2" /8" /6" ORB.... BP /2" /8" /6" BP /4" /4" ORB..... BP /4" /4" WN BP /4" /4" BP " /8" /8" /8" ORB..... BP " /8" /8" /8" WN BP " /8" /8" /8" BP mm /2" /4" /8" ORB..... BP mm /2" /4" /8" WI BP /2" /8" /8" WN BP /2" /8" /8" BP mm /4" /2" /4" BP mm /4" /2" /4" BB BP mm /4" /2" /4" FB BP mm /4" /2" /4" BP mm /4" /2" /4" BP /4" /8" BP /4" /8" BB BP /4" /8" FB BP /4" /8" BP /4" /8" BP /4" /8" BP /4" /8" BB BP /4" /8" FB BP /4" /8" BP /4" /8" AP BP mm mm mm mm SBK..... BP mm mm mm mm AP BP mm mm mm mm SBK..... BP mm mm mm mm AP BP mm mm ART..... BP mm mm DBS..... BP mm mm VS BP mm mm AP BP mm mm mm mm ART..... BP mm mm mm mm DBS..... BP mm mm mm mm VS BP mm mm mm mm ART..... BP /4" /16" /8" BP /4" /16" /8" ORB..... BP /4" /16" /8" R BP /4" /16" /8" ART..... BP " /4" /4" /8" BP " /4" /4" /8" ORB..... BP " /4" /4" /8" R BP " /4" /4" /8" ART..... BP /4", 96mm /7" /5" /7" BP mm, 3 3/4" /16" /16" /8" ORB..... BP mm, 3 3/4" /16" /16" /8" R BP mm, 3 3/4" /16" /16" /8" ART..... BP /16" /16" " BP /9" /3" " ORB..... BP /16" /16" " R BP /16" /16" " WN BP /16" /16" " ART..... BP " /8" /8" /8" BP " /8" /8" /8" ORB..... BP " /8" /8" /8" R BP " /8" /8" /8" WN BP " /8" /8" /8" ART..... BP /4" /2" /3" /8" BP /4" /2" /3" /8" ORB..... BP mm, 3 3/4" /2" /16" /8" R BP mm, 3 3/4" /2" /16" /8" WN BP mm, 3 3/4" /2" /16" /8" ART..... BP " /4" ORB..... BP " /4" WN BP " /4" WNC..... BP " /4" ART..... BP " /8" /16" /8" ORB..... BP " /8" /16" /8" WN BP mm /2" /4" /8" BP " /8" ORB..... BP " /8" PWT..... BP " /8" BP " /4" /2" /8" ORB..... BP " /4" /2" /8" PWT..... BP " /4" /2" /8" BP mm /2" /2" /8" ORB..... BP mm /2" /2" /8" PWT..... BP mm /2" /2" /8" BP mm... 29mm GPH..... BP mm... 29mm BP " mm mm mm GPH..... BP " mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP " mm mm mm GPH..... BP " mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP mm mm mm GPH..... BP mm mm mm BP mm... 30mm GPH..... BP mm... 30mm BP " mm mm mm GPH..... BP " mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP mm mm mm mm GPH..... BP mm mm mm mm BP " BJ BP " BP mm /3" /8" " ORB..... BP mm /3" /8" " WN BP mm /3" /8" " BP mm /7" /5" /5" ORB..... BP mm /7" /5" /5" WN BP mm /7" /5" /5" BP mm " /3" /4" ORB..... BP mm " /3" /4" WN BP mm " /3" /4" BP " /7" /5" /3" ORB..... BP " /7" /5" /3" WN BP " /7" /5" /3" BP " " /7" /4" ORB..... BP " " /7" /4" WN BP " " /7" /4" BP " /4" /5" /5" ORB..... BP " /4" /5" /5" WN BP " /4" /5" /5" BP /7" /2" ORB.... BP /7" /2" WN..... BP /7" /2" BP " " /16" " ORB..... BP " " /16" " WID..... BP " " /16" " The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

115 228 Amerock PRODUCT INDEX Amerock product index product index FB BP " " " /4" BP " " " /4" ORB..... BP " " " /4" WN BP " " " /4" AP BP mm mm mm mm ART..... BP mm mm mm mm DBS..... BP mm mm mm mm VS BP mm mm mm mm AP BP mm mm mm mm SBK..... BP mm mm mm mm BP " " " " G BP " " " " O BP " " " " ORB..... BP " " " " RB BP " " " " BP " " /8" " WN BP " " /8" " R BP " " /8" " BP " " /8" " WN BP " " /8" " ORB..... BP " " /8" " ORB..... BP " /4" /4" " SS BP " /4" /4" " BP " mm mm mm GPH..... BP " mm mm mm BP " mm mm mm GPH..... BP " mm mm mm BP " mm mm mm GPH..... BP " mm mm mm BP " mm mm mm GPH..... BP " mm mm mm ORB..... BP " /8" /4" " SS BP " /8" /4" " BP mm /8" /8" /8" BJ BP mm /8" /8" /8" BP mm /8" /8" /16" BP, CM /16".... 3/4" BP /8" /4" /3" GPH..... BP /8" /4" /3" ORB..... BP /8" /4" /3" WN BP /8" /4" /3" BP " /8" /7" GPH.... BP " /8" /7" ORB.... BP " /8" /7" WN..... BP " /8" /7" BP " /5" /9" /4" GPH..... BP " /5" /9" /4" ORB..... BP " /5" /9" /4" WN BP " /5" /9" /4" BP mm /2" /3" /8" GPH..... BP mm /2" /3" /8" ORB..... BP mm /2" /3" /8" WN BP mm /2" /3" /8" BP mm /9" /3" /7" GPH..... BP mm /9" /3" /7" ORB..... BP mm /9" /3" /7" WN BP mm /9" /3" /7" BP mm " /4" /4" GPH..... BP mm " /4" /4" ORB..... BP mm " /4" /4" WN BP mm " /4" /4" BP /2" /4" BP " /5" " /3" ORB..... BP " /5" " /3" BBR..... BP " /5" " /3" BP " /5" " /3" ORB..... BP " /5" " /3" AP BP /5", 35mm /4" /7" DOB..... BP /5", 35mm /4" /7" PN BP /5", 35mm /4" /7" AP BP /6", 128mm.. 1 1/5" DOB..... BP /6", 128mm.. 1 1/5" PN BP /6", 128mm.. 1 1/5" AP BP " /9" /6" DOB..... BP " /9" /6" PN BP " /9" /6" AP BP /5" /4" /5" DOB..... BP /5" /4" /5" PN BP /5" /4" /5" AP BP " /3" /2" " DOB..... BP " /3" /2" " PN BP " /3" /2" " AP BP mm /6" /7" /7" DOB..... BP mm /6" /7" /7" PN BP mm /6" /7" /7" AP BP /2" " /9" /4" DOB..... BP /2" " /9" /4" PN BP /2" " /9" /4" AP BP mm /3" /8" /4" DOB..... BP mm /3" /8" /4" PN BP mm /3" /8" /4" AP BP mm /7" /3" /3" DOB..... BP mm /7" /3" /3" PN BP mm /7" /3" /3" AP BP " /2" /7" /3" DOB..... BP " /2" /7" /3" PN BP " /2" /7" /3" AP BP " /3" " /6" DOB..... BP " /3" " /6" PN BP " /3" " /6" AP BP " " " " DOB..... BP " " " " PN BP " " " " BP /4" " /6" GB BP /4" " /6" ORB..... BP /4" " /6" BP /7" /9" GB BP /7" /9" ORB..... BP /7" /9" BP /4" /4" GB BP /4" /4" ORB..... BP /4" /4" BP " /3" /5" /3" GB BP " /3" /5" /3" ORB..... BP " /3' /5" /3" BP /4", 96mm /3" /5" /7" GB BP /4", 96mm /3" /5" /7" ORB..... BP /4", 96mm /3" /5" /7" BP ", 128mm /5" /3" /2" GB BP ", 128mm /5" /3" /2" ORB..... BP ", 128mm /5" /3" /2" BP /4", 160mm /8" /7" /5" GB BP /4", 160mm /8" /7" /5" ORB..... BP /4", 160mm /8" /7" /5" BP " " " " GPH..... BP " " " " ORB..... BP " " " " WN BP " " " " BP " " " /7' GPH..... BP " " " /7' ORB..... BP " " " /7' WN BP " " " /7' BP " /5" /5" /4" GPH..... BP " /5" /5" /4" ORB..... BP " /5" /5" /4" WN BP " /5" /5" /4" BP mm /5" /9" /7" ORB..... BP mm /5" /9" /7" BP mm /2" /2" /2" ORB..... BP mm /2" /2" /2" BP mm /8" /3" /3" ORB..... BP mm /8" /3" /3" BP " /3" /7" " ORB..... BP " /3" /7" " BP " /3" /5" /5" ORB..... BP " /3" /5" /5' BP /6" /9" " /8' ORB..... BP /6" /9" " /8" AORB.... BP " mm C..... BP " mm AORB.... BP /4" /2" C.... BP /4" /2" BBR..... BP /3" " BP /3" " ORB..... BP /3" " BBR..... BP /6" /3" BP /6" /3" ORB..... BP /6" /3" BP mm, 3 3/4" /4" /16" /4" BP mm /4" /16" /4" BBR..... BP /8" /3" BP /8" /3" ORB..... BP /8" /3" BBR..... BP /2" " BP /2" " ORB..... BP /2" " BBR..... BP /6" /5" /4" BP /6" /5" /4" ORB..... BP /6" /5" /4" BBR..... BP " /4" /5" /8" BP " /4" /5" /8" ORB..... BP " /4" /5" /8" BBR..... BP mm, 3 3/4" /5" /5" /6" BP mm, 3 3/4" /5" /5" /6" ORB..... BP mm, 3 3/4" /5" /5" /6" BBR..... BP mm, 5" " /3" /9" BP mm, 5" " /3" /9" ORB..... BP mm, 5" " /3" /9" BBR..... BP mm, 6 1/4" /4" /7" /4" BP mm, 6 1/4" /4" /7" /4" ORB..... BP mm, 6 1/4" /4" /7" /4" BBR..... BP " /5" /4" /3" BP " /5" /4" /3" ORB..... BP " /5" /4" /3" BJ BP mm, 3 3/4" /4" /16" /4" BBR..... BP " /5" " /3" BP " /7" " /5" GB BP " /7" " /5' ORB..... BP " /7" " /5' BP " " /9" /3" GB BP " " /9" /3" ORB..... BP " " /9" /3" BP " " /6" /2" GB BP " " /6" /2" ORB..... BP " " /6" /2" BP /7" /5" " GPH..... BP /7" /5" " BP " /3" /7" /8" GPH..... BP " /3" /7" /8" BP /4" /9" /9" /6" GPH..... BP /4" /9" /9" /6" BP " /7" /2" /5" GPH..... BP " /7" /2" /5" BP /4" " /2" /5" GPH..... BP /4" " /2" /5" BP " " /3" /8" GPH..... BP " " /3" /8" BP " " /3" /8" GPH..... BP " " /3" /8" BP " /7" /3" /8" GPH..... BP " /7" /3" /8" DBS.... BP /3" /6" DOB.... BP /3" /6" RB..... BP /3" /6" SN..... BP /3" /6" DBS..... BP " /6" DOB..... BP " /3" /8" /7" RB BP " /6" SN BP " /3" /8" /7" DBS..... BP ", 128mm /7" " /8" DOB..... BP ", 128mm /7" " /8" RB BP ", 128mm /7" " /8" SN BP ", 128mm /7" " /8" DBS..... BP /7", 160mm " " /2" DOB..... BP /7", 160mm " " /2' RB BP /7", 160mm " " /2" SN BP /7", 160mm " " /2" DBS..... BP " " /6" " DOB..... BP " " /6" " RB BP " " /6" " SN BP " " /6" " DBS..... BP " " /2" /3" DOB..... BP " " /2" /3" RB BP " " /2" /3" SN BP " " /2" /3" DBS..... BP " /9" /4" /2" DOB..... BP " /9" /4" /2" RB BP " /9" /4" /2" SN BP " /9" /4" /2" ABS " /16" /4" /8" ABL-PW..... P ABR-PW..... P BL-PW..... P BR-PW..... P C-14-W..... P /2" /8" C-16-W..... P /2" /8" C-18-W..... P /2" /8" C-20-W..... P /2" /8" The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

116 230 Amerock PRODUCT INDEX Amerock product index product index 5850C-22-W..... P /2" /8" C-23-W..... P /2" /8" C-24-W..... P /2" /8" D-14-WS.... P /2" /8" D-16-WS.... P /2" /8" D-18-WS.... P /2" /8" D-20-WS.... P /2" /8" D-22-WS.... P /2" /8" AE BP /4" /4" AE BP, CM /2" /8" M BP, LD M BP AE BP, CM " /4" /2" " AE BP /16" /16" AE BP, CM " " /8" /8" G C /2" /4" G C /2" /4" G C /2" /4" G C /2" /4" G C /2" /4" B-SET C AE BP /2" /8" /16" /8" BP /16" " G C /2" /8" G C /2" /8" G C /2" /8" BP /4" /16" BP /4" /16" F-A BP F-C BP MB BP /4" /16" F-C BP A-C BP /2" /2" /2" CM / / A BP / / BB CM, D / / BK BP / / BN BP / / CM / / ORB CM / / / W BP, LL / / / W BP / / / WI BP / / / BP, CM, D / / / CM, D / / / A BP / / / BB CM, D / / / BK BP / / / BN BP / / / CP BP / / / CM / / / HBZ BP ORB CM PWT BP R BP RBZ BP W..... BP, TN, LL W BP WI BP, D ABS " /2" /4" /8" BB CM BK.....BP, TEN /4" /8" BP /4" /8" BP, D " /8" /8" /4" HB BP /4" " HBZ..... BP /4" " R BP /4" " BP /8" " AE.....BP, TEN /8" " AE..... BP, CM " /4" /8" " W..... BP " /8" /8" /8" FWB..... BP " /8" /8" /8" OB..... BP, PK " /8" /8" /8" W BP, PK " /8" /8" /8" WB BP " /8" /8" /8" W..... BP /4" " AB BP /4" " FWB..... BP /4" " O BP /4" " OB BP /4" " W BP /4" " WB BP /4" " W..... BP " /16" /8" /3" A BP " /16" /8" /3" AB BP " /16" /8" /3" AL BP " /16" /8" /3" BNW..... BP " /16" /8" /3" O BP, CM " /16" /8" /3" OB..... BP, CM " /16" /8" /3" W BP, CM " /16" /8" /3" WB..... BP, CM " /16" /8" /3" W..... BP /4" " W BP /4" " BP " /4" /16" /8" BP " /4" /16" /8" BB..... BP, CM " /4" /16" /8" G BP /2" /8" R BP /2" /8" BP, CM " /4" /2" " G BP, PK " /4" /2" " R1... BP, CM, D, PK " /4" /2" " BP " /4" /8" " R1... BP, CM, D, PK " /4" /8" " BP, D " " /8" " GW..... BP, CM " " /8" " MB..... BP, CM " " /8" " R BP, CM " " /8" " RBZ..... BP /16" /16" BP / / RBZ..... BP " /16" /16" /16" BP / / AE BP, CM / / BB..... BP, CM / / BP, CM " /2" /4" " R BP, CM " /2" /4" " R BP /4" " BP / / R BP, CM " /2" /8" /4" RBZ..... BP " /2" /8" /4" BP, D / / R BP /16" /4" HB BP " " " " HBZ..... BP " " " " R1.... BP, CM, PK " " " " BP, CM, TEN /8" /8" BP, CM, D /16" " A-AM..... BP, CM /8" " A-CR BP, CM /8" " A-CW BP, CM /8" " BP /4" /2" BP /4" " BP, CM /4" " AE BP, CM /4" " Crystal..... BP /16" /2" AC BP / / AE BP / / O BP / / AE BP / / BP / / G BP, LL / / O BP / / ORB BP / / Crystal..... BP /8" /16" Crystal..... BP /16" /8" Crystal..... BP /16" " AE BP, CM " /4" /4" /8" BB BP " /8" /8" /8" BP " /8" /2" " GW BP " /8" /2" " D BB..... BP, CM, D / / / BP / / / AE BP / / / BB..... BP, CM / / / AE BP, CM / / BB CM CM BB CM BP, CM / / / BP, D, TN / / / BB... BP, CM, D, TN, LL / / / FB BP / / / BP, CM, LL / / / ORB..... BP, CM / / / T1-O / / / T2-O BP / / / W BP / / / WI BP / / / WN BP / / / BB LD BB BP / / / AE BP /4" " BB LD / / / BB LD BB..... BP, CM / / / BP / / / ORB BP / / / WN BP / / / T1-O / / / BB CM / / BP / / ORB BP / / WN BP / / BB CM AE / / / BP " /4" /16" /8" R BP " /16" /4" " WI BP " " /4" " AE BP, CM / / BB..... BP, CM / / BP / / BP / / AC BP / / AE BP / / BB..... BP, CM / / BP " /4" /4" /4" D..... BP " /4" /4" /4" BP " /4" /4" /4" CS BP " /4" /4" /4" CS-26D.... BP " /4" /4" /4" CS BP " /4" /4" /4" CS-.... BP " /4" /4" /4" BP " /4" /4" /4" BP mm /8" /16" /16" D..... BP mm /8" /16" /16" BP mm /8" /16" /16" BN BP mm /8" /16" /16" CS BP mm /8" /16" /16" CS-26D.... BP mm /8" /16" /16" CS BP mm /8" /16" /16" CS-.... BP mm /8" /16" /16" BP mm /8" /16" /16" AE BP " /2" /16" " AE BP /2" /16" /8" /8" BP, LL / / / BB..... BP, LL WN-G D M PK M-AE PK M-BNL..... CM M-DAE..... PK M-PB PK M-WI PK AE BP /4" /4" /8" /32" BP / / / BB CM BP, PK /8" /4" BP /4" /16" AE BP /4" /16" BP /4" /16" GW BP /4" /16" MB BP /4" /16" MB BP /4" /16" NB BP /4" /16" ORB BP /4" " RBZ BP /4" /16" WI BP /4" /16" WN BP /4" /16" BP /2" /16" AE BP / / BP /2" /16" MB BP /2" /16" ORB BP /2" /5" WN BP /2" /16" G CM AE CM AE BP, CM /4" " AE BP " /4" The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

117 232 Amerock PRODUCT INDEX Amerock product index product index G CM G CM G CM Z CL G..... BP, CM ABS /4" G CM BP, LL / / BP, CM / / AE.... BP, CM, TN, LL / / BB BP / / BP / / ORB BP / / BP, CM, LL / / BP, CM, LL / / AE... BP, CM, D, TN, LL / / BB.... BP, CM, LL / / BP, CM, LL / / ORB BP / / BB CM ABS " /8" /8" /16" PA BP /4" /4" PBK BP /4" /4" PW BP /4" /4" PA BP " /16" /8" /4" PBK BP " /16" /8" /4" PW BP " /16" /8" /4" WD BP /4" /16" WD BP " /8" WD BP /2" /16" WD BP " /8" CH /4" /8" WD BP /2" /8" /8" /4" WD BP mm /2" /16" /16" LB /8" /8" BP /16" /16" BN BP /16" /16" G BP, D /16" /16" MB BP /16" /16" O BP, D, PK /16" /16" ORB BP /16" /16" PWT BP /16" /16" BN BP " /4" /2" " G BP " /4" /2" " O BP, D " /4" /2" " ORB BP " /4" /2" " BP " /16" AE..... BP, CM, D " " /16" /16" BB BP, CM " /16" " " BB BP /4" /16" BP " /16" /8" /4" D BP " /16" /8" /4" BP " /16" /8" /4" BB BP " /16" /16" /4" BN BP " /16" /16" /4" CS BP " /16" /8" /4" CS-26D..... BP " /16" /8" /4" CS BP " /16" /8" /4" CS BP " /16" /8" /4" BP " /16" /8" /4" BP /2" /16" /16" /4" D BP /2" /16" /16" /4" WDMA..... BP /2" /8" WDO..... BP, CM /2" /8" MA BP, CM /4" /8" MA BP, CM /4" /8" WDCH BP /4" /8" WDMA..... BP /4" /8" WDO..... BP, CM /4" /8" BN BP " " /2" " G BP " " /2" " G BP /8" /4" /16" LB /4" " AE BP " /16" ABS /8" /8" /2".....9/16" AE BP /8" /8" ABS /2" /4" ABS " /16" /8" BLK /4" " WHT /4" " CBB mm, 1 3/8" BB CM M CM BB CM CM M CM ORB..... CM BB CM CM M CM M CM ORB..... CM BB CM CM M CM ORB..... CM BB CM CM M CM ORB..... CM BP " /8" " /8" R BP " /8" " /8" BP " /4" /8" /8" R BP " /4" /8" /8" BP " /16" /4" /16" R BP " /16" /4" /16" BP /16" /4" /16" FB BP " /16" /2" /16" BP " /16" /2" /16" ORB BP " /16" /2" /16" WID BP " /16" /2" /16" WN BP " /16" /2" /16" BP /4" ORB..... BP /4" FB BP /8" /16" BP, TEN /8" /16" ORB BP /8" /16" WID BP /8" /16" WN BP /8" /16" FB BP /8" /16" " BP /8" /16" " ORB BP /8" /16" " WID BP /8" /16" " WN BP /8" /16" " BP /2" /16" /16" /4" BN BP /2" /16" /16" /4" CS BP /2" /16" /16" /4" CS-26D..... BP /2" /16" /16" /4" CS BP /2" /16" /16" /4" CS BP /2" /16" /16" /4" BP /2" /16" /16" /4" BP, CM AE CM BB..... BP, CM BP, CM G CM ORB..... BP, CM BP, CM AE CM BB..... BP, CM BP, CM G CM ORB..... BP, CM CM AE CM BB..... BP, CM BP, CM G CM ORB..... BP, CM W CM WI LCM BP, CM BB..... BP, CM BP, CM ORB..... BP, CM CM BP, CM BB..... BP, CM BP, CM ORB..... BP, CM BB LD CM BP, CM BB..... BP, CM BP, CM G CM ORB..... BP, CM AE BP " /4" /2" /16" BB CM BN BP " " /2" /8" G BP, D " " /2" /8" MB BP " " /2" /8" O BP, D " " /2" /8" PWT BP " " /2" /8" AB /8" /4" BP " /8" /5" /8" G BP " /8" /16" /8" ORB BP " /8" /5" /8" AE BP " /8" /16" /16" BP /4" " OM BP /4" " ABS /4" /8" MA BP, CM /2" /8" MA BP /2" /8" MA BP /2" /8" WDCH BP /2" /8" BP mm, 5" /16" /2" /4" BP, TEN mm, 5" /16" /16" /16" BP mm, 5" /2" /8" /16" ART BP mm, 2 1/2" /8" " " BP, TPK... 64mm, 2 1/2" /8" " " ORB BP mm, 2 1/2" /8" " " CW BP " /4" /4" /16" CH " /16" /16" /4" SCH " /16" /16" /4" SCH " /16" /16" /4" BB CM A2G CM G BP, LL A2G CM CH /16" " G BP, CM AW BP PT LL W BP F-PT CM F-W CM PT CM D BP " /4" /16" /4" W BP " /4" /16" /4" /4" /4" /2" D BP /2" /4" /4" /4" AL..... BP, CM, LL BN BP /2" /4" /4" /4" D BP " /4" /16" /4" PT BP, CM AW.... BP, CM, LL G BP " /2" /8" " G BP, LL B2G CM R BP /8" " The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. The dimensional information provided here should be verified with the actual product prior to drilling or attempting to install the hardware. Please direct any questions you may have on the installation process to Amerock Customer Service. Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page Item Pack Type Center Length Width Diameter Projection Page

118 pack type information Decorative Pack Types Packaging Description BP Polybag Pack pieces in a carton, individually bagged with screws. CDK Cabinet Design Kit 10 items in a tray and PVS carton. 4 per case. Includes drillbit, screwbit, template & screws. CM Bulk Pack pieces in a box. Items individually wrapped in tissue. Includes screws. D Bulk Pack pieces in a box. Items individually wrapped in tissue. PK Special Pack Quantity per box varies by product. TPK Ten Pack 10 pieces in plastic clamshell pack. 4 packs per case. Includes screws. Bath Pack Types Packaging Description BH Retail Pack Product, mounting hardware, instructions. Hinge Pack Types Packaging Description BP Polybag Pack 25 pairs of hinges in a carton, individually bagged with pads and screws. CM/LCM/M Bulk Pack 100 pairs of hinges per carton with separate bags of pads and screws. D/LD Bulk Pack 100 pairs of hinges per carton without pads and screws. P Large Bulk Pack 2500 plus "eaches" of hinges in a carton (quantities vary by product) without pads and screws. PK Special Pack 50 "eaches" of hinges in a carton, individually bagged with pads and screws. Catch Pack Types Packaging Description BP Polybag Pack 25 pieces in a carton, individually bagged with screws and a strike. CM Bulk Pack 200 catches in a carton with separate bags of screws and strikes. Drawer Slide Pack Types Packaging Description C Polybag Pack One set of drawer slides retail packed. P Bulk Pack 50 pieces of one item. Celebrating 80 Years With over 581 combined years of experience, Amerock associates are proud to have been your style partner since We thank all of our customers and consumers for a great 80 years and look forward to a long exciting future together. CM Bulk Pack 100 slides. 234 Amerock Pack type information