Manhole and sewer equipment Manhole rehabilitation

Transcription

1 Manhole Frame Lifters and Accessories EBRALIT -SuperFix Quick-Setting Mortar Issue 2006 NEW: Bitumen Shutter Practical solutions for manhole frame rehabilitation and new frame installations

2 Manhole Cover Frame Lifter, Manual Oil-Hydraulic The New Generation from professionals for professionals The new patented double chisel ensures a full support of the cover frame and minimises bending stress to the frame. The chisels can easily be moved into the joint by using a manual driven oil-hydraulically pump to jack-up the cover frame. damage free adjustments without jack-hammer and noise manual driven oil-hydraulically chisels simple manual handling three patented chisels reduce stress on shaft short mobilisation time minimised weight increased lifting range complete removal of frames possible integrated wheels for on site movements powerful and value for money painted steel Height: 950 mm Width: 1,100 mm Height of stroke: 350 mm approx. 105 kg Support frame internal Ø: 800 mm Lifting force: approx. 30 t Item no. RH-ZU/ square support frame interchangeable Item no. RH-GG/060-HY Manhole cover frame lifter, manual oil-hydraulic incl. round support frame 2

3 Gully Cover Frame Lifter The alternative to the jack-hammer. With this optimised tool you will abandon the jack-hammer. It allows to adjust and completely remove cover frames without bedding flange. It ensures effective work with optimised functions. reduced weight damage free adjustments without jack-hammer and noise short mobilisation time two lifting spindles app. 12 t lifting force per spindle increased lifting range complete removal of frames possible integrated wheels for on site movements powerful and value for money maintenance free Gully cover frame lifter for extricable rectangular frames Item no. RH-GG/ Gully cover frame lifter internal diameter 450 mm outside dimensions 550 x 550 mm Item no. RH-ZU/035 Gully chisel for small and rectangular cover frame internal diameter 350 mm rectangular frame 300 x 550 mm Item no. RH-ZU/300 x 550 Support frame for rectangular cover frame rectangular frame 300 x 550mm Height: Width: painted steel 1,000 mm 700 mm Height of stroke: 350 mm approx. 80 kg Lifting force: approx. 16 t support frame internal: 580 x 580mm 3

4 Rubble Plates The only and safe solution To avoid man hole entry, rubble plates are installed at first. They prevent any debris falling into the chamber. A rubber seal firmly closes the joint and avoids gases escaping causing harm to employees. no man hole entry avoid debris or tools to fall into shaft solid three point attachment bolts easy removal of rubble flexible towards asymmetric shafts three standard sizes on stock effective against gases and smell AP/060 AP/070 AP/080 Outside Ø incl. rubber seal: approx. 620 mm approx. 690 mm approx. 790 mm Metal diameter: approx. 550 mm approx. 620 mm approx. 720 mm approx. 9 kg approx. 10 kg approx. 11 kg Item no. RH-AP/060 Item no. RH-AP/070 Item no. RH-AP/080 Rubble plates for manholes internal-ø approx. 625, 700 and 800 mm NEW 4 Special sizes on request Item no. RH-AP/ small rubble plate for road gullies internal-ø approx mm Outside diameter incl. rubber seal: approx. 450 mm Metal diameter: 320 x 380 mm approx. 6 kg Item no. RH-AP/ square rubble plate for square shaft cones Outside*: approx. 590 x 590 mm Metal*: 530 x 530 mm approx. 12 kg *incl. rubber seal

5 Frame Holding Brackets Real Help Frame holding brackets allow frame to be placed easily and safely above the shaft cone and to be adjusted into the lane. easy frame installation exact level adjustment free opening clearance for shutter. easy storage and transport. all frame shapes (square, round, oval, triangular) One set = 3 brackets per bracket: galvanised steel Size: L x Wx H approx. 600 x 50 x 300 mm approx. 3,5 kg Clamp range: 0,5 10,5 cm Item no. RH-ZU/EG Frame holding brackets set of 3 Bitumen Shutter Adjustable bitumen shutter for self-levelling cover frames Opening range: approx mm steel Height: approx. 300 mm approx. 12,5 kg Item no. RH-BS/ Bitumen shutter adjustable NEW 5

6 Metall Shutter For professionals The special adjustment bolt facilitates the shutter tightly fit against manhole frame and shaft. An elastic rubber seals the shutter and avoids bedding mortar to escape. A sound monolithic bedding (frame and pre-cast adjustment rings/elements) can be ensured. special quick adjustment bolt ridged galvanised steel shutter two or three integrated funnels for venting and filling shutter height approx. 210 mm two standard sizes special shutters (diameter and height) on request Opening range: Height: DE mm galvanised steel 210 mm approx. 7 kg Item no. RH-MS/060 Metal shutter for round openings of approx. 600 mm internal Ø Opening range: Height: DE mm galvanised steel 210 mm approx. 5 kg Item no. RH-MS/ Metal shutter for round, small openings of approx mm internal Ø 6

7 Inflatable Shutter For comfort The only inflatable shutter tool for special high joints. Special manufactured rubber membrane avoids bulging out and ensures flush finish. The shutter allows effective work and ensures high quality results. optimised shutter height maximised internal opening left optimised sealing characteristics quick air release two funnels ridged galvanised steel and robust rubber three standard sizes on stock, others on request LS/060 LS/070 LS/080 External-Ø [mm]: Height [mm]: approx. 210 approx. 210 approx. 210 approx. 7 kg approx. 8 kg approx. 9 kg Item no. RH-LS/060 Item no. RH-LS/070 Item no. RH-LS/080 Inflatable shutters for openings of internal Ø approx. 600, 700 and 800 mm NEW LS/ LS/ External Ø: mm mm Height: approx. 210 mm approx. 285 mm approx. 5,5 kg approx. 5,5 kg Item no. RH-LS/ Inflatable shutters, small for road gullies openings of internal Ø approx mm Item no. RH-LS/ Inflatable shutters, mini for extensions openings of internal Ø approx mm NEW 7

8 EBRALIT -Super-Fix Quick Setting Mortar Manhole refurbishment and lifting equipment The optimal bedding mortar for professional manhole frame basement The high viscose, quick setting non-shrink grout allows a level and bond bedding for cover frames and adjustment rings. It allows full traffic impact within 30 min. Very effective and approved in more than cases. Compression strength more than after 30 minutes EBRALIT : after 30 min. = 13 N/mm 2 after 28 days = 65 N/mm t highly stressable optimised viscosity non-shrinking setting within 5 8 min constant quality all the year compression strength at approx. 20 C 13 N/mm 2 after 0,5 h 57 N/mm 2 after 7 days 65 N/mm 2 after 28 days Beck GmbH Subject to change. Measure, weights and photos not binding. bag size 25kg Also ideal for traffic sign foundations. EBRALIT a guaranty for permanent, sustainable, high strength repair of cover frame bedding. Beck GmbH Kanal- und Schachtgeräte Obere Mühle 11 Bonfeld D Bad Rappenau Fon: +49 (0) / Fax: +49 (0) / Internet: info@beck-kanal.de Partner in Ireland and Great Britain: DMS Ltd. Knapoque Mallow IRL - Co. Cork phone: +(353) fax: +(353) mobile:+(353) Internet: info@dmsltd.ie