Micro Motion R-Series Mass and Volume Flowmeter

Transcription

1 Product Data Sheet PS-00363, Rev. C June 2006 Micro Motion R-Series Mass and Volume Flowmeter With MVD Technology Accuracy to 0.5% on liquids and 0.75% on gases Easy to stall and use Reliable and rugged Direct mass or volume measurement

2 Micro Motion R-Series meters Micro Motion R-Series meters offer highly accurate flow measurement for virtually any process fluid. R-Series meters feature tegral transmitters, makg them easy to stall. With MVD Technology, you can also remotely mount your transmitter up to 1000 feet (300 m) away usg standard 4-wire cable. You get the flexibility you need to mount the sensor anywhere your process pipg while savg stallation costs. Micro Motion R-Series meters are available to support several digital communication protocols, cludg HART, Modbus, FOUNDATION fieldbus, and Profibus-PA. Other features clude a variety of standard process connections, milliampere and pulse outputs, a standard display, and a built- totalizer that can be reset from the display. Micro Motion R-Series meters are designed to perform harsh operatg environments, and carry hazardous area approvals for the U.S.A., Canada, Europe, Japan, and other areas around the world. Product selector program Micro Motion offers an on-le program for fdg the best products to fit your application. The product selector program allows you to specify the parameters that matter to you, such as accuracy, flow capacity, pressure drop, or turndown. To use the product selector program, visit our web site at Contents Liquid flow performance Gas flow performance Temperature specifications Pressure ratgs Vibration limits Hazardous area classifications Materials of construction Dimensions Fittg options Orderg formation Micro Motion R-Series Meters

3 Liquid flow performance Mass Volume (1) lb/m kg/h gal/m l/h Maximum flow rate R025S, R025P R050S R100S , ,650 R200S , ,100 Mass flow accuracy (2) Transmitter with MVD Technology ±0.5% of rate (3) zero stability IFT9703 transmitter ±0.5% of rate ± of rate flow rate 100 % Volume flow accuracy Transmitter with MVD Technology ±0.5% of rate (3) zero stability IFT9703 transmitter ±0.5% of rate ± of rate flow rate 100 % Repeatability Transmitter with MVD Technology ±0.25% of rate (3) zero stability IFT9703 transmitter ±0.25% of rate ± ½ of rate flow rate 100 % lb/m kg/h gal/m l/h Zero stability R025, R025P R050S R100S R200S (1) Volumetric measurement is based on a process-fluid density of 1 g/cm 3. For fluids with density other than 1 g/cm 3, the volume flow rate equals the maximum mass flow rate divided by the fluid s density. (2) Flow accuracy cludes the combed effects of repeatability, learity, and hysteresis. All specifications for liquids are based on reference conditions of water at 68 to 77 F (20 to 25 C) and 15 to 30 psig (1 to 2 bar), unless otherwise noted. (3) When flow rate < (zero stability / 0.005), then accuracy = ±[½(zero stability / flow rate) 100]% of rate and repeatability = ±[½(zero stability / flow rate) 100]% of rate. Micro Motion R-Series Meters 3

4 Liquid flow performance contued Typical accuracy, turndown, and pressure drop with R100 sensor and Series 1000 transmitter The graph below is an example of the relationship between accuracy, turndown, and pressure drop when measurg the flow of water with a Model R100 sensor and Series 1000 transmitter. Pressure drop is dependent on process conditions. To determe accuracy, turndown, and pressure drop with your process variables, use Micro Motion s product selector, available at :1 10:1 1:1 Accuracy, % Flow rate, % of maximum Turndown from maximum flow rate 20:1 10:1 1:1 Accuracy, ± % Pressure drop psi bar Micro Motion R-Series Meters

5 Gas flow performance When selectg sensors for gas applications, measurement accuracy is a function of fluid mass flow rate dependent of operatg temperature, pressure, or composition. However, pressure drop through the sensor is dependent upon operatg temperature, pressure, and fluid composition. Therefore, when selectg a sensor for any particular gas application, it is highly recommended that each sensor be sized usg Micro Motion s product selector, available at Mass Volume (1) lb/m kg/h SCFM Nm 3 /h Typical flow rates that produce approximately 10 psid (0.68 bar) pressure drop on air at 68 F (20 C) and 100 psi (6.8 bar) R025S, R025P R050S R100S R200S Typical flow rates that produce approximately 50 psid (3.4 bar) pressure drop on natural gas (MW ) at 68 F (20 C) and 500 psi (34 bar) R025S, R025P R050S R100S R200S ,500 12,300 19,500 Mass flow accuracy (2) Transmitter with MVD Technology ±0.75% of rate (3) zero stability IFT9703 transmitter ±1.0% of rate ± of rate flow rate 100 % Mass flow repeatability (2) Transmitter with MVD Technology ±0.5% of rate (3) zero stability IFT9703 transmitter ±0.5% of rate ± of rate flow rate 100 % lb/m kg/h Zero stability R025S, R025P R050S R100S R200S (1) Standard (SCFM) reference conditions are 14.7 psia and 68 F. Normal (Nm 3 /hr) reference conditions are bar and 0 C. (2) Stated flow accuracy cludes the combed effects of repeatability, learity, and hysteresis. (3) When flow rate < (zero stability / ), then accuracy = ±[(zero stability / flow rate) 100]% of rate and repeatability = ±[(zero stability / flow rate) 100]% of rate. Micro Motion R-Series Meters 5

6 Gas flow performance contued Typical accuracy and pressure drop with R100S with MVD Technology Air at 68 F (20 C), static pressures as dicated on graph psi bar Inches H Accuracy (± % of rate) psig (7 bar) 500 psig (35 bar) 1000 psig (70 bar) lb/m kg/hr Flow rate Natural gas (MW ) at 68 F (20 C), static pressures as dicated on graph psi bar Inches H Accuracy (± % of rate) psig (7 bar) 500 psig (35 bar) 1000 psig (70 bar) lb/m kg/hr Flow rate Standard or Normal Volumetric Capability Standard and normal volumes are quasi mass flow units for any fixed composition fluid. Standard and normal volumes do not vary with operatg pressure, temperature, or density. With knowledge of density at standard or normal conditions (available from reference sources), a Micro Motion meter can be configured to output standard or normal volume units without the need for pressure, temperature, or density compensation. Contact your local sales representative for more formation. 6 Micro Motion R-Series Meters

7 Temperature specifications Accuracy All models ±1 C ± 0.5% of readg C Repeatability All models ±0.2 C Temperature limits (1) All models with all electronics options (except the IFT9703 transmitter) (2) 176 (80) 140 (60) 158 (70) Ambient temperature F ( C) 104 (40) 68 (20) 32 (0) 4 ( 20) 40 ( 40) 76 ( 60) 104 (40) 58 ( 50) 112 ( 80) 148 ( 100) 148 ( 100) 103 ( 75) 58 ( 50) 13 ( 25) 32 (0) 77 (25) 122 (50) 167 (75) 212 (100) Process fluid temperature F ( C) 257 (125) 302 (150) 347 (175) When ambient temperature is below 58 F ( 50 C), a core processor must be heated to brg its local ambient temperature to between 58 F ( 50 C) and +140 F (+60 C). Long-term storage of electronics at ambient temperatures below 58 F ( 50 C) is not recommended. Sensors with tegral IFT9703 transmitter (3) Ambient temperature: +131 F (+55 C) maximum Process temperature: +257 F (+125 C) maximum (1) Temperature limits may be further restricted by hazardous area approvals. See pages (2) The temperature extender option allows the sensor case to be sulated without coverg the transmitter, core processor, or junction box, but does not affect temperature ratgs. (3) Refer to the IFT9703 Product Data Sheet for more formation about its temperature limits. Micro Motion R-Series Meters 7

8 Pressure ratgs Flow tube ratg (1) R025P 2300 psi 158 bar All other models 1450 psi 100 bar PED compliance Sensors comply with council directive 97/23/EC of 29 May 1997 on Pressure Equipment. Housg ratg All models Housg is not rated for pressure contament. (1) Over the entire temperature range, accordg to ASME B31.3. Vibration limits Meets IEC , endurance sweep, 5 to 2000 Hz, 50 sweep cycles at 1.0 g Hazardous area classifications UL Sensor with tegrally mounted Model IFT9703 transmitter Sensor with tegrally mounted Model 1700/2700 transmitter or with core processor Ambient temperature: 4 to +104 F ( 20 to +40 C) Class I, Div. 2, Groups A, B, C, and D Class II, Div. 2, Groups F and G Ambient temperature: 40 to +104 F ( 40 to +40 C) Class I, Div. 1, Groups C and D Class I, Div. 2, Groups A, B, C, and D Class II, Div. 1, Groups E, F, and G CSA and CSA-US Sensor with tegrally mounted Model IFT9703 transmitter Sensor with tegrally mounted Model 1700/2700 transmitter or with core processor Ambient temperature: +140 F max. (+60 C max.) Class I, Div. 2, Groups A, B, C, and D Class II, Div. 2, Groups F and G Ambient temperature: 40 to +140 F ( 40 to +60 C) Class I, Div. 1, Groups C and D Class I, Div. 2, Groups A, B, C, and D Class II, Div. 1, Groups E, F, and G 8 Micro Motion R-Series Meters

9 Hazardous area classifications contued ATEX Models R025 and R050 (C.I.C. A2) with core processor or Model 1700/2700 transmitter 0575 II 2 G EEx ib IIC T1...T5 II 2 D IP65 T C Max. ambient temperature ( C) De-rate at slope = 0,25 C ambient per 1 Cfluid Model R100 (C.I.C. A2) with core processor or Model 1700/2700 transmitter Sensor fluid temperature ( C) The maximum surface temperature for dust is as follows: T5:T 95 C, T4:T 130 C, T3 to T1:T 153 C II 2 G EEx ib IIC T1...T5 II 2 D IP65 T C Max. ambient temperature ( C) De-rate at slope = 0,25 C ambient per 1 C fluid Sensor fluid temperature ( C) The maximum surface temperature for dust is as follows: T5:T 95 C, T4:T 130 C, T3 to T1:T 186 C. Micro Motion R-Series Meters 9

10 Hazardous area classifications contued ATEX Model R200 (C.I.C. A1) with core processor or Model 1700/2700 transmitter 0575 II 2 G EEx ib IIC T1...T5 II 2 D IP65 T C Max. ambient temperature ( C) De-rate at slope = 0,25 C ambient per 1 Cfluid Models R025 and R050 (C.I.C. A2) with IFT9703 transmitter Sensor fluid temperature ( C) The maximum surface temperature for dust is as follows: T5:T 95 C, T4:T 130 C, T3 to T1:T 176 C II 2 G EEx ib IIC T1...T6 Max. ambient temperature ( C) De-rate at slope = 0,50 C ambient per 1 C fluid Sensor fluid temperature ( C) 10 Micro Motion R-Series Meters

11 Hazardous area classifications contued ATEX Model R100 (C.I.C. A2) with IFT9703 transmitter 0575 II 2 G EEx ib IIC T1...T6 Max. ambient temperature ( C) De-rate at slope = 0,50 C ambient per 1 C fluid Sensor fluid temperature ( C) Model R200 (C.I.C. A1) with IFT9703 transmitter 0575 II 2 G EEx ib IIC T1...T6 Max. ambient temperature ( C) De-rate at slope = 0,50 C ambient per 1 C fluid Sensor fluid temperature ( C) Micro Motion R-Series Meters 11

12 Materials of construction Wetted parts (1) 316L staless steel Housg Sensor 304L staless steel Core processor Integrally mounted transmitter CF-3M staless steel or polyurethane-pated alumum; NEMA 4X (IP65) Polyurethane-pated alumum; NEMA 4X (IP65) (1) General corrosion guides do not account for cyclical stress, and therefore should not be relied upon when choosg a wetted material for your Micro Motion flowmeter. Please refer to Micro Motion s corrosion guide for material compatibility formation. Weight Weights provided are the weight of the flowmeter with ANSI 150 lb weld neck raised face flanges. lb kg Sensor with tegrally mounted IFT9703 transmitter R R R R Sensor with tegrally mounted Model 1700/2700 transmitter R R R R Sensor with core processor R R R R Sensor with extended core processor R R R R Micro Motion R-Series Meters

13 Dimensions Sensor with tegrally mounted Model 1700 transmitter Dimensions ches 2 1/2 14 NPT or M /16 (183) 2 13/16 (21) Dim. A ±1/8 (±3) 2 7/16 (62) Ø4 11/16 (119) 2 11/16 (69) Dim. G Dim. H Ø Dim. B Dim. C Dim. D NPT female Swagelok fittg dimensions Dim. F Dim. E R025 { 1 3/4 (45) R /16 (49) R025 1/2 14 NPT female fittg R050 3/4 14 NPT female fittg Dim. A ±1/8 (±3) Dimensions (1) Model RD (2) C D E F G H R (5) 5/8 (15) 5 1/8 (130) 9 3/4 (247) 2 13/16 (72) 4 11/16 (119) 6 (153) R (9) 5/8 (15) 6 3/4 (171) 11 7/8 (301) 2 15/16 (74) 4 11/16 (119) 6 (153) R (16) 7/8 (22) 9 1/8 (232) 14 7/8 (378) 4 1/8 (104) 4 15/16 (126) 6 1/4 (159) R (29) 1 3/4 (44) 12 9/16 (319) 17 7/8 (454) 5 5/8 (144) 5 13/16 (148) 7 3/16 (182) (1) For dimensions A and B, see fittgs tables on pages (2) Mimum flow path restriction diameter. Micro Motion R-Series Meters 13

14 Dimensions contued Sensor with tegrally mounted IFT9703 transmitter Dimensions ches 4 1/4 (107) 1 3/4 (44) 3/4 14 NPT or M for power wirg 5 3/4 (146) Field wirg compartment 1/2 (13) 3/4 14 NPT or M for output wirg Dim. K (both conduit opengs) Case ground Dim. L Dim. C Ø Dim. B Dim. D NPT female Swagelok fittg dimensions Dim. F Dim. E Dim. A ±1/8 (±3) R025 { 1 3/4 (45) R /16 (49) R025 1/2 14 NPT female fittg R050 3/4 14 NPT female fittg Dim. A ±1/8 (±3) Dimensions (1) Model RD (2) C D E F K L R (5) 5/8 (15) 5 1/8 (130) 9 3/4 (247) 2 13/16 (72) 7 13/16 (199) 14 1/16 (358) R (9) 5/8 (15) 6 3/4 (171) 11 7/8 (301) 2 15/16 (74) 7 13/16 (199) 15 11/16 (398) R (16) 7/8 (22) 9 1/8 (232) 14 7/8 (378) 4 1/8 (104) 8 1/16 (205) 18 5/16 (466) R (29) 1 3/4 (44) 12 9/16 (319) 17 7/8 (454) 5 5/8 (144) 8 15/16 (228) 22 5/8 (575) (1) For dimensions A and B, see fittgs tables on pages (2) Mimum flow path restriction diameter. 14 Micro Motion R-Series Meters

15 Dimensions contued Sensor with core processor Dimensions ches Dim. C Dim. A ±1/8 (±3) 2 5/8 (67) Dim. M Dim. N Ø4 3/8 (111) 1/2 14 NPT or M Dim. P Dim. Q Ø1 1/4 (32) NORMAL FLOW Ø B Dim. D Dim. E Dim. F Extended mount option NPT female Swagelok fittg dimensions { R025 R /4 (45) 1 15/16 (49) R025 1/2 14 NPT female fittg R050 3/4 14 NPT female fittg Dim. A ±1/8 (±3) Dimensions (1) Model RD (2) C D E F M N P Q R (5) 5/8 (15) 5 1/8 (130) 9 3/4 (247) 2 13/16 (72) 4 7/16 (112) 2 11/16 (69) 9 13/16 (249) 8 1/16 (205) R (9) 5/8 (15) 6 3/4 (171) 11 7/8 (301) 2 15/16 (74) 4 7/16 (112) 2 11/16 (69) 9 13/16 (249) 8 1/16 (205) R (16) 7/8 (22) 9 1/8 (232) 14 7/8 (378) 4 1/8 (104) 4 11/16 (119) 2 15/16 (75) 10 1/16 (255) 8 5/16 (212) R (29) 1 3/4 (44) 12 9/16 (319) 17 7/8 (454) 5 5/8 (144) 5 9/16 (141) 3 7/8 (98) 10 15/16 (278) 9 1/4 (234) (1) For dimensions A and B, see fittgs tables on pages (2) Mimum flow path restriction diameter. Micro Motion R-Series Meters 15

16 Fittg options Fittg code Dim. A face-to-face ches Dim B. outside diam. ches R025S fittg options (1) 1/2-ch ANSI 150 lb weld neck raised face flange (406) 3 1/2 (89) 1/2-ch ANSI 300 lb weld neck raised face flange /8 (416) 3 3/4 (95) 1/2-ch ANSI 600 lb weld neck raised face flange /8 (429) 3 3/4 (95) 1/2-ch NPT female Swagelok size 8 VCO fittg (356) (2) not applicable 1/2-ch sanitary fittg (Tri-Clamp compatible) (356) 1 (25) DN15 PN40 weld neck flange; DIN 2635 type C face /4 (387) 3 3/4 (95) DN15 PN100/160 weld neck flange; DIN 2638 type E face /16 (401) 4 1/8 (105) JIS 15mm 10K/20K weld neck raised face flange /16 (393) 3 3/4 (95) JIS 15mm 40K weld neck raised face flange /2 (420) 4 1/2 (115) 15mm DIN11851 hygienic couplg /16 (353) Rd 34 1/8 R050S fittg options (1) 1/2-ch ANSI 150 lb weld neck raised face flange /8 (460) 3 1/2 (89) 1/2-ch ANSI 300 lb weld neck raised face flange /2 (469) 3 3/4 (95) 1/2-ch ANSI 600 lb weld neck raised face flange (482) 3 3/4 (95) 3/4-ch NPT female Swagelok size 12 VCO fittg /8 (415) (2) not applicable 3/4-ch sanitary fittg (Tri-Clamp compatible) /8 (403) 1 (25) DN15 PN40 weld neck flange; DIN 2635 type C face /8 (441) 3 3/4 (95) DN15 PN100/160 weld neck flange; DIN 2638 type E face /8 (455) 4 1/8 (105) DN25 PN40 weld neck flange; DIN 2635 type C face /2 (444) 4 1/2 (115) JIS 15mm 10K/20K weld neck raised face flange /16 (446) 3 3/4 (95) JIS 15mm 40K weld neck raised face flange /8 (473) 4 1/2 (115) 15mm DIN11851 hygienic couplg (407) Rd 34 1/8 R100S fittg options (1) 1-ch ANSI 150 lb weld neck raised face flange /16 (576) 4 1/4 (108) 1-ch ANSI 300 lb weld neck raised face flange /16 (588) 4 7/8 (124) 1-ch ANSI 600 lb weld neck raised face flange /16 (601) 4 7/8 (124) DN25 PN40 weld neck flange; DIN 2635 type C face /16 (544) 4 1/2 (115) DN25 PN100/160 weld neck flange; DIN 2638 type E face /16 (580) 5 1/2 (140) 1-ch sanitary fittg (Tri-Clamp compatible) /4 (540) 2 (50) JIS 25mm 10K/20K weld neck raised face flange /16 (550) 4 15/16 (125) JIS 25mm 40K weld neck raised face flange /16 (582) 5 1/8 (130) 25mm DIN11851 hygienic couplg /16 (522) Rd 52 1/6 (1) Fittgs listed here are standard options. Other types of fittgs are available. Contact your local Micro Motion representative. (2) Dimension specified table does NOT clude fittg length. For stallation, modify Dim. A value to clude fittg. See pages 13, 14, and Micro Motion R-Series Meters

17 Fittg options contued Fittg code Dim. A face-to-face ches Dim B. outside diam. ches R200S fittg options (1) 1 1/2-ch ANSI 150 lb weld neck raised face flange /4 (629) 5 (127) 1 1/2-ch ANSI 300 lb weld neck raised face flange /4 (642) 6 1/8 (155) 1 1/2-ch ANSI 600 lb weld neck raised face flange /4 (654) 6 1/8 (155) 2-ch ANSI 150 lb weld neck raised face flange /8 (632) 6 (152) 2-ch ANSI 300 lb weld neck raised face flange /8 (645) 6 1/2 (165) 2-ch ANSI 600 lb weld neck raised face flange /8 (664) 6 1/2 (165) DN40 PN40 weld neck; DIN 2635 type C face /16 (598) 5 15/16 (150) DN50 PN40 weld neck; DIN 2635 type C face /8 (600) 6 1/2 (165) DN50 PN100 weld neck; DIN 2637 type E face /4 (641) 7 11/16 (195) DN50 PN160 weld neck; DIN 2638 type E face /16 (655) 7 11/16 (195) JIS 40mm 10K weld neck raised face flange /16 (595) 5 1/2 (140) JIS 40mm 20K weld neck raised face flange /16 (595) 5 1/2 (140) JIS 50mm 10K weld neck raised face flange /16 (595) 6 1/8 (155) JIS 50mm 20K weld neck raised face flange /8 (600) 6 1/8 (155) JIS 50mm 40K weld neck raised face flange /16 (646) 6 1/2 (165) 1 1/2-ch sanitary fittg (Tri-Clamp compatible) /4 (591) 2 (50) 2-ch sanitary fittg (Tri-Clamp compatible) /8 (581) 2 1/2 (64) 40mm DIN11851 hygienic couplg /16 (589) Rd 65 1/6 50mm DIN11851 hygienic couplg /4 (591) Rd 78 1/6 (1) Fittgs listed here are standard options. Other types of fittgs are available. Contact your local Micro Motion representative. Fittgs for R-Series Model R025P high-pressure flowmeter Fittg code Dim. A face-to-face ches Dim B. outside diam. ches 15 mm DIN PN100/160 weld neck, DIN 2638, type E face /16 (401) 4 1/8 (105) 1/2-ch NPT female Swagelok size 8 VCO fittg (356) (1) not applicable (1) Dimension specified table does NOT clude fittg length. For stallation, modify Dim. A value to clude fittg. See pages 13, 14, and 15. Micro Motion R-Series Meters 17

18 Orderg formation Model R025S R050S R100S R200S Product description Standard sensor models R-Series sensor; 1/4-ch; 316L staless steel R-Series sensor; 1/2-ch; 316L staless steel R-Series sensor; 1-ch; 316L staless steel R-Series sensor; 2-ch; 316L staless steel High-pressure models R025P R-Series sensor; 1/4-ch; 316L staless steel; 2300 psi tube ratg Code Process connection ### See fittgs option tables on pages Code Case options N Standard case Code Electronics terface Q 4-wire polyurethane-pated alumum tegral core processor for remotely mounted transmitter with MVD Technology A 4-wire staless steel tegral core processor for remotely mounted transmitter with MVD Technology V 4-wire polyurethane-pated alumum tegral core processor with extended mount for remotely mounted transmitter with MVD Technology B 4-wire staless steel tegral core processor with extended mount for remotely mounted transmitter with MVD Technology C Integrally mounted Model 1700 (all output options) or Model 2700 (FOUNDATION fieldbus or Profibus-PA) transmitter W (1) D (1) Y (1) E (1) I Code Polyurethane-pated alumum tegral core processor for direct host communication Staless steel tegral core processor for direct host communication Polyurethane-pated alumum tegral core processor with extended mount for direct host communication Staless steel tegral core processor with extended mount for direct host communication Integrally mounted IFT9703 transmitter Conduit connections B E F G Electronics terface codes Q, A, V, B, W, D, Y, and E (tegral core processor) 1/2-ch NPT no gland M20 no gland Brass/nickel cable gland (cable diameter 8.5 to 10 mm) Staless steel cable gland (cable diameter 8.5 to 10 mm) Electronics terface codes C or I (tegrally mounted transmitter) A No gland Contued on next page (1) When electronics terface W, D, Y, or E is ordered with approval C, A, or Z, an MVD Direct Connect I.S. barrier is supplied. No barrier is supplied when ordered with approval codes M or N. 18 Micro Motion R-Series Meters

19 Orderg formation contued Code Approvals M Micro Motion standard no approval N Micro Motion standard / PED compliant C CSA (Canada only) A CSA (U.S.A. and Canada) not available with electronics terface code I U UL only available with electronics terface code I Z ATEX Equipment category 2 (Zone 1) / PED compliant P NEPSI (1) Code Language A Danish stallation manual C Czech stallation manual D Dutch stallation manual E English stallation manual F French stallation manual G German stallation manual H Fnish stallation manual I Italian stallation manual J Japanese stallation manual M Chese stallation manual N Norwegian stallation manual O Polish stallation manual P Portuguese stallation manual S Spanish stallation manual W Swedish stallation manual B Hungarian CE requirements document and English manual K Slovak CE requirements document and English manual T Estonian CE requirements document and English manual U Greek CE requirements document and English manual L Latvian CE requirements document and English manual V Lithuanian CE requirements document and English manual Y Slovenian CE requirements document and English manual Code Future option 1 Z Reserved for future use Code Future option 2 Z Reserved for future use Code Future option 3 Z Reserved for future use Code Factory options Z Standard product X ETO product R Restocked product (if available) Typical model number: R025S 113 N C A U E Z Z Z Z (1) Available only with language code M (Chese). Micro Motion R-Series Meters 19

20 2006, Micro Motion, Inc. All rights reserved. P/N PS-00363, Rev. C Due to Micro Motion s commitment to contuous improvement of our products, all specifications are subject to change without notice. ELITE, ProLk, and the Micro Motion logo are registered trademarks, and MVD and MVD Direct Connect are trademarks of Micro Motion, Inc., Boulder, Colorado. The Emerson logo is a trademark of Emerson Electric Co. All other trademarks are property of their respective owners. For the latest Micro Motion product specifications, view the PRODUCTS section of our web site at Micro Motion Inc. USA Worldwide Headquarters 7070 Wchester Circle Boulder, Colorado T F Micro Motion Europe Emerson Process Management Neonstraat WX Ede The Netherlands T +31 (0) F +31 (0) Micro Motion United Kgdom Emerson Process Management Limited Horsfield Way Bredbury Industrial Estate Stockport SK6 2SU U.K. T F Micro Motion Asia Emerson Process Management 1 Pandan Crescent Sgapore Republic of Sgapore T F Micro Motion Japan Emerson Process Management 1-2-5, Higashi Shagawa Shagawa-ku Tokyo Japan T F