SITRANS F flowmeters SITRANS F US. Flowmeter SONO 3300/FUS060 4/177. Technical specifications. Overview

Transcription

1 Overview The combination of sensor SONO 3300 sensor and FUS060 transmitter is ideal for applications within the general industry. Measurements are independent of liquid temperature, density, pressure and conductivity. Transducers cannot be changed. Benefits Robust remote Robust design for industrial applications Measures all liquids less than 350 cst, conductive or non conductive No pressure drop Reliable and accurate flow measurements Long time stability pplication The main application for SONO 3300/FUS060 ultrasonic flowmeter is measurement of volume. SONO 3300/FUS060 can be used for water and treated waste water, oil and liquid gases, hot water / cooling systems. Design The SONO 3300/FUS060 consists of a casted sensor (DN 50 to 150 (2 to 6 )), welded pipes (DN 200 to 300 (8 to 12 )) and the. The transmitter can only be separate mounted. The internal signal cables from transducers to sensor connection box are highly protected from aggressive environment by protection of stainless steel pipes. Sensor installation See system information Technical specifications 2-track sensor with flanges and integrated transducers Error in measurement Error in measurement at reference conditions; % of measured value v > m/s, <± 0.5% of rate (v=flow speed) SONO 3300 DN 50 and DN 65: For Reynolds numbers 1000 < R e < 5000: ± 1.5% 10 m/s (32 ft/s) Max. flow velocity Nominal size DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200 (2 8 ) DN 250, DN 300 (10 12 ) Liquid temperature Separate version: C (1 320 F) mbient temperature (sensor) Separate version: C ( F) Storage: C ( F) Enclosure Standard version: IP67 (NEM X/NEM 6) Process connections PN designated DN (2 12 ), PN 0 EN type 11,B DN ( 12 ), PN 16 DN (8 12 ), PN 10 Class designated DN ( ), EN type 11,B class 150 DN ( ), class 300 Transducer Integrated version welded into pipe Materials Pipe DN (2 6 ): Steel EN Mn5 DN (8 12 ): Steel EN P235GH Flange DN (2 12 ): EN S235JRG2 Class STM 105 Transducer Stainless steel ISI 316 or similar Certificates and approvals Material certificate The sensor is supplied as standard with a Siemens Flow Instruments certificate of conformity. Extended material certificate optional available. NDT examination report vailable on request Ex approval System TEX approval for SONO 3300 together with remote transmitter FUS060-Ex (TEX II 2G Ex dem [ia/ib] IIC T6/T/T3) (on preparation). The sensors are approved according to EU directive 97/23/EC dated 29 May 1997 regarding fluid group 1, classified in category III. Design according to EN 1380 (PED Directive). /177

2 Coaxial cable between sensor SONO 3300 and Standard Coaxial cable (75 Ω) Outside diameter Length Material (outside jacket) Coaxial cable with SMB straight plug on one end for the FUS060 connector Ø 5.8 mm 3, 15, 30, 60, 90, 120 m (9.8, 9.21, 98.3, , , ft) between sensor and transmitter black PE mbient temperature C ( F) High temperature Coaxial cable (75 Ω) Outside diameter Length Material (outside jacket) Coaxial cable with SMB straight plug on one end for the FUS060 connector Ø 5.13 mm (first 0.3 m (0.98 ft) part to the transducer), Ø 5.8 mm (for remaining cable to the transmitter - with SMB plug at the end) and between these is a black hot melt junction Ø 16 mm (length 70 mm) 3, 15, 30, 60, 90, 120 m (9.8, 9.21, 98.3, , , ft) between sensor and transmitter (max. 3 m (9.8 ft)) transducer cable length for Ex area mounted transmitters) Brown PTFE (0.3 m (0.98 ft) part) and black PE (for remaining cable) mbient temperature C ( F) (brown PTFE transducer part) and C ( F) (black PE for remaining transmitter cable part) /178

3 Selection and Ordering data Order No. Order code Sensor SONO 3300 with F) 7 ME Diameter Flow setting Qn [m 3 /h] DN 50 (2") 10 1 DN 50 (2") 26 1 B DN 50 (2") 60 1 D DN 65 (2½)" 15 1 E DN 65 (2½)" 2 1 F DN 65 (2½)" H DN 80 (3") 20 1 J DN 80 (3") 60 1 K DN 80 (3") M DN 100 (") 36 1 N DN 100 (") P DN 100 (") R DN 125 (5") 50 1 S DN 125 (5") T DN 125 (5") V DN 150 (6") 80 2 DN 150 (6") B DN 150 (6") D DN 200 (8") E DN 200 (8") F DN 200 (8") H DN 250 (10") J DN 250 (10") K DN 250 (10") M DN 300 (12") N DN 300 (12") P DN 300 (12") R Flange norm and pressure rating (ll sizes are not available in all pressure ratings) System without sensor - only transmitter 1) FUS060 as spare part - settings as defined with this Order No. EN PN 10 (DN (8"... 12")) B PN 16 (DN (3"... 12")) C PN 0 (DN (2"... 12")) E NSI B16.5 class 150 (DN (2"... 12")) H class 300 (DN (2"... 12" )) J Sensor type (approval) and transmitter mounting IP67 standard, remote transmitter 1 IP67 Ex-version (TEX), remote transmitter 3 1) (Ex-version) Cable gland entries in FUS060 and SONO 3300 Cable glands M20 in sensor and in 1 transmitter M25/20/16 x 1.5 Cable glands ½ NPT in sensor and in 2 transmitter ½ NPT Transmitter SITRNS FUS060 Without transmitter (only sensor) IP65 (NEM ), 120/230 V C N IP65 (NEM ), 2 V C/DC P IP65 (NEM ), 2 V C/DC, Ex-version Q 1) (TEX) Selection and Ordering data Order No. Order code Sensor SONO 3300 with F) 7 ME FUS060 output module Without transmitter (only sensor) HRT, m, 1 pulse output, 1 relay B HRT, Ex version, m,1 pulse output, C 1) 1 relay PROFIBUS P,1 pulse/frequency D PROFIBUS P, Ex version, 1 pulse/frequency E 1) Transducer coax cable x 3 m, max. 70 C (158 F) 0 x 15 m, max. 70 C (158 F) 1 x 30 m, high temp. max.200 C (392 F) 2 x 30 m, max. 70 C (158 F) 3 x 60 m, max. 70 C (158 F) x 90 m, max. 70 C (158 F)m 5 x 120 m, max. 70 C (158 F) 6 x 3 m, high temp. max.200 C (392 F) 7 x 15 m, high temp. max.200 C (392 F) 8 Please also see for practical examples of ordering Selection and Ordering data 1) On preparation. 2) On request. Order code dditional information Please add -Z to Order No. and specify Order code(s) and plain text. Calibration Sensor prepared for older SONO 3000 transmitters 30 2) (on preparation) Production calibration DN DN 300 Included (with certificate) ccredited Siemens ISO/IEC calibration D20 2) Max. flow m 3 /h depending on dimension (DN DN 80) ccredited Siemens ISO/IEC calibration D21 2) Max. flow m 3 /h depending on dimension (DN DN 300) Material certificate EN F10 EN with 100% NDT on weldings F11 2) Tag name plate Stainless steel tag with 12 mm characters, Y17 max. 15 characters (add plain text) Self-adhesive plastic tag with 8 mm characters, max. Y18 15 characters (add plain text) F) Subject to export regulations L: 9I999, ECCN: N. /179

4 Sensor SONO 3300 accessories and spare parts Potting kit Type/description Order No. F) Symbol Potting kit, IP68, 10 m (32.81 ft) w.g. rating FDK-085L203 Cables for FUS060 (only for spare part case) Type/description Length m (ft) Order No. F) Symbol Coaxial cable for FUS060, (75 Ω, max. 70 ºC (158 ºF), black PVC) 3 (9.8) 5E (2 pcs.) 15 (9.21) 5E (98.3) 5E (196.85) 5E (295.28) 5E (393.70) 5E High temp. coaxial cable for FUS060; with 0.3 m brown PTFE high temp. transducer 3 (9.8) 5E part, max. 200 C (392 F) and black PVC for remaining transmitter part with SMB plug, max. 70 ºC (158 ºF); (impedance 75 Ω) 15 (9.21) 5E (2 pcs.) 30 (98.3) 5E Cable connection boxes (For the connection of individually transducer cables with the FUS060 transducer cables.) Type/description Order No. F) Symbol Junction box for coax cable IP68 metal box for coax cables FDK-085B1361 Cable glands (each 1 pc.) (only for spare part case) Type Material Temperature range [ C ( F)] Order No. F) Symbol M20 Chrome plated brass ( ) on request M20 (Ex type) Stainless steel ( ) on request ½-NPT Chrome plated brass ( ) on request F) ll products on this page subject to export regulations L: 9I999, ECCN: N. /180

5 Dimensional drawings to sensor SONO 3300 L D i D Sensor SONO 3300 DN EN PN 10 PN 16 PN 0 L 1) D D i L 1) D D i L 1) D D i mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch DN NSI Weight 2) 150 Ib 300 Ib EN (PN 0) NSI CL 300 L 1) D D i L 1) D D i mm inch mm inch mm inch mm inch mm inch mm inch mm inch kg lbs kg lbs 50 mm / mm / 2½ mm / mm / mm / mm / mm / mm / mm / ) Length tolerance (mm): DN50... DN100 +2/-3, DN /-, DN /-5. 2) pproximate weights without - weight of FUS060 is. kg (9.7 lb) Modification 02/2008 /181