Micro Motion R-Series Mass and Volume Flowmeter

Transcription

1 Product Data Sheet PS-363, Rev. B March 24 Micro Motion R-Series Mass and Volume Flowmeter With MVD Technology TM Micro Motion

2 Micro Motion R-Series Flowmeters Welcome to a new era in measurement technology! Now you can afford to replace your old volumetric technology with Micro Motion R-Series flowmeters. Micro Motion R-Series flowmeters are competitive in both price and accuracy specifications with positive displacement, differential pressure, magnetic, and vortex flowmeters, yet they have many advantages that other technologies do not have. Micro Motion R-Series flowmeters offer highly accurate flow measurement for virtually any process fluid be it clean or not. The same flowmeter can provide direct mass and volume flow for liquids, gases, and slurries without having to be recalibrated. Their immunity to flow profile means that you can install Micro Motion R-Series flowmeters anywhere in your process without having to worry about expensive straight runs or flow straightening devices. This translates to real savings in installation and engineering costs. Micro Motion R-Series flowmeters are available to support several digital communication protocols, including HART, Modbus, FOUNDATION fieldbus, and Profibus-PA. Other features include a variety of standard process connections, milliampere and pulse outputs, a standard display, and a built-in totalizer that can be reset from the display. Micro Motion R-Series flowmeters are designed to perform in harsh operating environments, and carry hazardous area approvals for the U.S.A., Canada, Europe, Japan, and other areas around the world. Micro Motion is well known for increasing plant efficiency, product quality, and profitability. Now, Micro Motion R-Series flowmeters offer all this and more. For general purpose flow measurement applications, Micro Motion R-Series flowmeters provide an ideal alternative to other flowmetering technologies. Micro Motion flowmeters have no moving parts saving you money over the course of their lifetime by helping you make the best use of your time, people, and material. Micro Motion R-Series flowmeters feature integral transmitters, making them easy to install. With the new MVD Technology, you can also remotely mount your transmitter up to 1 feet away using standard 4-wire cable. You get the flexibility you need to mount the sensor anywhere in your process piping while saving installation costs. 2 Micro Motion R-Series Flowmeter

3 Benefits of Micro Motion R-Series Flowmeters Easy to use Micro Motion R-Series flowmeters are easy to start up, have no moving parts, don t need periodic recalibration, are non-intrusive, and don t require regular maintenance. Reliable and rugged There s nothing to wear out or break down more than 4, Micro Motion flowmeters are installed and working in processes just like yours. The accumulated knowledge of Micro Motion is built into each flowmeter. Easy to install Micro Motion R-Series flowmeters require no special mounting, no straight run requirements and no flow conditioning elements. Direct mass or volume measurement With direct mass measurement, Micro Motion R-Series flowmeters are immune to variations in pressure, temperature or process fluids. The same flowmeter can measure liquids, gases, or slurries. Greater accuracy Accuracy to.5% on liquids and.75% on gases means better product quality and less waste. Micro Motion R-Series Flowmeter 3

4 Liquid flow performance Mass Volume (1) lb/min kg/hr gal/min l/hr Nominal flow range (2) R25S, R25P to 5 to 136 to 6 to 136 R5S to 15 to 48 to 18 to 48 R1S to 6 to 16,325 to 72 to 16,325 R2S to 16 to 43,55 to 192 to 43,55 Maximum flow rate R25S, R25P R5S R1S 12 32, ,65 R2S 32 87, ,1 Accuracy (3) Transmitter with MVD Technology IFT973 transmitter ±.5% of rate (4) zero stability ±.5% of rate ± % of rate flow rate Repeatability Transmitter with MVD Technology IFT973 transmitter ±.25% of rate (4) zero stability ±.25% of rate ± ½ % of rate flow rate lb/min kg/hr gal/min l/hr Zero stability R25, R25P R5S R1S R2S (1) The volumetric flow rate is based on a process-fluid density of 1 g/cc. For fluids with density other than 1 g/cc, the maximum volume flow rate equals the mass flow rate divided by the fluid s density. (2) Micro Motion has adopted the terminology nominal flow range. The upper limit of this range is the flow rate at which water at reference conditions causes approximately 15 psi (1 bar) of pressure drop for Micro Motion R-Series flowmeters. (3) Flow accuracy includes the combined effects of repeatability, linearity, and hysteresis. All specifications for liquids are based on reference conditions of water at 68 to 77 F (2 to 25 C) and 15 to 3 psig (1 to 2 bar), unless otherwise noted. zero (4) When flow rate stability zero stability <, then accuracy = ± % of rate and.5 flow rate zero stability repeatability = ± ½ % of rate. flow rate 4 Micro Motion R-Series Flowmeter

5 Liquid flow performance continued Typical accuracy, turndown, and pressure drop with Series 1 transmitter To determine accuracy, turndown, and pressure drop with your process variables, use Micro Motion s product selector, available at :1 1:1 Accuracy, %, standard sensors : Nominal flow rate, % Turndown 2:1 1:1 1:1 Accuracy, ± % Pressure drop psi bar Micro Motion R-Series Flowmeter 5

6 Gas flow performance When selecting sensors for gas applications, measurement accuracy is a function of fluid mass flow rate independent of operating temperature, pressure, or composition. However, pressure drop through the sensor is dependent upon operating temperature, pressure, and fluid composition. Therefore, when selecting a sensor for any particular gas application, it is highly recommended that each sensor be sized using Micro Motion s product selector, available at Mass Volume (1) lb/min kg/hr SCFM Nm 3 /hr Typical flow rates that produce approximately 1 psid (.68 bar) pressure drop on air at 68 F (2 C) and 1 psi (6.8 bar) R25S, R25P R5S R1S R2S Not yet rated for gas. Typical flow rates that produce approximately 5 psid (3.4 bar) pressure drop on natural gas (MW ) at 68 F (2 C) and 5 psi (34 bar) R25S, R25P R5S R1S R2S Not yet rated for gas. Accuracy (2) Transmitter with MVD Technology IFT973 transmitter ±.75% of rate (3) zero stability ± 1.% of rate ± % of rate flow rate Repeatability (2) Transmitter with MVD Technology IFT973 transmitter ±.5% of rate (3) zero stability ±.5% of rate ± % of rate flow rate lb/min kg/hr Zero stability R25S, R25P.1.27 R5S.3.82 R1S R2S Not yet rated for gas. (1) Standard (SCFM) reference conditions are 14.7 psia and 68 F. Normal (Nm 3 /hr) reference conditions are 1.13 bar and C. (2) Flow accuracy includes the combined effects of repeatability, linearity, and hysteresis. zero (3) When flow rate stability zero stability <, then accuracy = ± % of rate and.75 flow rate zero stability repeatability = ± % of rate. flow rate 6 Micro Motion R-Series Flowmeter

7 Gas flow performance continued Typical accuracy and pressure drop with R1S with MVD Technology Air at 68 F (2 C), static pressures as indicated on graph psi bar Inches H Accuracy (± % of rate) psig 5 psig 1 psig lb/min kg/hr Flow rate Natural gas (MW ) at 68 F (2 C), static pressures as indicated on graph psi bar Inches H Accuracy (± % of rate) psig 5 psig 1 psig lb/min kg/hr Flow rate Micro Motion R-Series Flowmeter 7

8 Temperature limits Process fluid Sensor with extended core processor Sensor with integral IFT973 transmitter All other models 6 to +3 F ( 5 to +15 C) 4 to +257 F ( 4 to +125 C) 6 to +257 F ( 5 to +125 C) Ambient temperature Storage (1) Operation (1) 4 to +185 F ( 4 to +85 C) with IFT973 transmitter, no display 4 to +14 F ( 4 to +6 C) with Model 17 transmitter 22 to +131 F ( 3 to +55 C) with IFT973 transmitter, no display +32 to +131 F ( to +55 C) with IFT973 transmitter and display 4 to +14 F ( 4 to +6 C) with Model 17 transmitter F C Approved temperature UL With integral IFT973 4 to to +4 With core processor or 4 to to +4 integral Model 17 CSA With integral IFT973 Maximum +14 Maximum +6 With core processor or 4 to to +6 integral Model 17 ATEX Refer to graphs on page 9 Refer to graphs on page 9 (1) For Series 1/2 transmitters, display responsiveness can decrease and display may become difficult to read below 4 F ( 2 C). Above 131 F (55 C) some darkening of the display may occur. Pressure ratings Flow tube rating (1) R25P 23 psi 158 bar All other models 145 psi 1 bar PED compliance Sensors comply with council directive 97/23/EC of 29 May 1997 on Pressure Equipment. Housing rating All models Housing is not rated for pressure containment. (1) Over the entire temperature range, according to ASME B Micro Motion R-Series Flowmeter

9 Hazardous area classifications UL is a U.S.A. approvals agency. CSA is a Canadian approvals agency that provides approvals accepted both in the U.S.A. (C-US) and in Canada. ATEX is a European directive. UL and CSA (1) Sensor with integrally mounted IFT973 transmitter Sensor with integrally mounted Model 17/27 transmitter, or with core processor Class I, Div. 2, Groups A, B, C, and D Class II, Div. 2, Groups F and G Class I, Div. 1, Groups C and D Class I, Div. 2, Groups A, B, C, and D Class II, Div. 1, Groups E, F, and G ATEX Sensor with integrally mounted IFT973 transmitter CE 575 II 2G EEx ib IIC T1-T6 Max. ambient temperature ( C) De-rate at slope = C ambient 1 C fluid T6 T5 T4 T1 T Sensor fluid temperature ( C) Sensor with integrally mounted Model 17/27 transmitter, or with core processor CE 575 II 2G EEx ib IIC T1-T5 Max. ambient temperature ( C) De-rate at slope.25 C ambient = C fluid T5 T4 T1 T Sensor fluid temperature ( C) (1) For temperature limits, see page 8. Micro Motion R-Series Flowmeter 9

10 Materials of construction Wetted parts (1) 316L stainless steel Housing Sensor 34L stainless steel Core processor Integrally mounted transmitter CF-3M stainless steel or epoxy-painted aluminum; NEMA 4X (IP65) Epoxy-painted aluminum; NEMA 4X (IP65) (1) General corrosion guides do not account for cyclical stress, and therefore should not be relied upon when choosing a wetted material for your Micro Motion flowmeter. Please refer to Micro Motion s corrosion guide for material compatibility information. Weight Weights provided are the weight of the flowmeter with ANSI 15 lb weld neck raised face flanges. lb kg Sensor with integrally mounted IFT973 transmitter R R R R Sensor with integrally mounted Model 17/27 transmitter R R R R Sensor with core processor R R R R Sensor with extended core processor R R R R Micro Motion R-Series Flowmeter

11 Dimensions Sensor with integrally mounted Model 17 transmitter Dimensions in 2 1/2 14 NPT or M /16 (183) 2 13/16 (21) Dim. A ±1/8 (±3) 2 7/16 (62) Ø4 11/16 (119) 2 11/16 (69) Dim. G Dim. H Ø Dim. B Dim. C Dim. D Dim. F NPT female CAJON fitting dimensions Dim. E R25 { 1 3/4 (45) R5 1 15/16 (49) R25 1/2 14 NPT female fitting R5 3/4 14 NPT female fitting Dim. A ±1/8 (±3) Dimensions (1) Model C D E F G H R25 5/8 (15) 5 1/8 (13) 9 3/4 (247) 2 13/16 (72) 4 11/16 (119) 6 (153) R5 5/8 (15) 6 3/4 (171) 11 7/8 (31) 2 15/16 (74) 4 11/16 (119) 6 (153) R1 7/8 (22) 9 1/8 (232) 14 7/8 (378) 4 1/8 (14) 4 15/16 (126) 6 1/4 (159) R2 1 3/4 (44) 12 9/16 (319) 17 7/8 (454) 5 5/8 (144) 5 13/16 (148) 7 3/16 (182) (1) For dimensions A and B, see fittings tables on pages Micro Motion R-Series Flowmeter 11

12 Dimensions continued Sensor with integrally mounted IFT973 transmitter Dimensions in 4 1/4 (17) 1 3/4 (44) 3/4 14 NPT or M2 1.5 for power wiring 5 3/4 (146) Field wiring compartment 1/2 (13) 3/4 14 NPT or M2 1.5 for output wiring Dim. K (both conduit openings) Case ground Dim. L Dim. C Ø Dim. B Dim. D Dim. F NPT female CAJON fitting dimensions Dim. E Dim. A ±1/8 (±3) R25 { 1 3/4 (45) R5 1 15/16 (49) R25 1/2 14 NPT female fitting R5 3/4 14 NPT female fitting Dim. A ±1/8 (±3) Dimensions (1) Model C D E F K L R25 5/8 (15) 5 1/8 (13) 9 3/4 (247) 2 13/16 (72) 7 13/16 (199) 14 1/16 (358) R5 5/8 (15) 6 3/4 (171) 11 7/8 (31) 2 15/16 (74) 7 13/16 (199) 15 11/16 (398) R1 7/8 (22) 9 1/8 (232) 14 7/8 (378) 4 1/8 (14) 8 1/16 (25) 18 5/16 (466) R2 1 3/4 (44) 12 9/16 (319) 17 7/8 (454) 5 5/8 (144) 8 15/16 (228) 22 5/8 (575) (1) For dimensions A and B, see fittings tables on pages Micro Motion R-Series Flowmeter

13 Dimensions continued Sensor with core processor Dimensions in Dim. C Dim. A ±1/8 (±3) 2 5/8 (67) Dim. M Dim. N Ø4 3/8 (111) 1/2 14 NPT or M2 1.5 Dim. P Dim. Q Ø1 1/4 (32) NORMAL FLOW Ø B Dim. D Dim. E Dim. F Extended mount NPT female CAJON fitting dimensions { R25 R5 1 3/4 (45) 1 15/16 (49) R25 1/2 14 NPT female fitting R5 3/4 14 NPT female fitting Dim. A ±1/8 (±3) Dimensions (1) Model C D E F M N P Q R25 5/8 (15) 5 1/8 (13) 9 3/4 (247) 2 13/16 (72) 4 7/16 (112) 2 11/16 (69) 9 13/16 (249) 8 1/16 (25) R5 5/8 (15) 6 3/4 (171) 11 7/8 (31) 2 15/16 (74) 4 7/16 (112) 2 11/16 (69) 9 13/16 (249) 8 1/16 (25) R1 7/8 (22) 9 1/8 (232) 14 7/8 (378) 4 1/8 (14) 4 11/16 (119) 2 15/16 (75) 1 1/16 (255) 8 5/16 (212) R2 1 3/4 (44) 12 9/16 (319) 17 7/8 (454) 5 5/8 (144) 5 9/16 (141) 3 7/8 (98) 1 15/16 (278) 9 1/4 (234) (1) For dimensions A and B, see fittings tables on pages Micro Motion R-Series Flowmeter 13

14 Fittings for R-Series flowmeters Fitting code Dim. A face-to-face Dim B. outside diam. R25S fitting options (1) 1/2-inch ANSI 15 lb weld neck raised face flange (46) 3 1/2 (89) 1/2-inch ANSI 3 lb weld neck raised face flange /8 (416) 3 3/4 (95) 1/2-inch ANSI 6 lb weld neck raised face flange /8 (429) 3 3/4 (95) 1/2-inch NPT female CAJON size 8 VCO fitting (356) (2) not applicable 1/2-inch sanitary fitting (Tri-Clamp compatible) (356) 1 (25) DN15 PN4 weld neck flange; DIN 2635 type C face /4 (387) 3 3/4 (95) DN15 PN1/16 weld neck flange; DIN 2638 type E face /16 (41) 4 1/8 (15) JIS 15mm 1K/2K weld neck raised face flange /16 (393) 3 3/4 (95) JIS 15mm 4K weld neck raised face flange /2 (42) 4 1/2 (115) 15mm DIN11851 aseptic coupling /16 (353) Rd 34 1/8 R5S fitting options (1) 1/2-inch ANSI 15 lb weld neck raised face flange /8 (46) 3 1/2 (89) 1/2-inch ANSI 3 lb weld neck raised face flange /2 (469) 3 3/4 (95) 1/2-inch ANSI 6 lb weld neck raised face flange (482) 3 3/4 (95) 3/4-inch NPT female CAJON size 12 VCO fitting /8 (415) (2) not applicable 3/4-inch sanitary fitting (Tri-Clamp compatible) /8 (43) 1 (25) DN15 PN4 weld neck flange; DIN 2635 type C face /8 (441) 3 3/4 (95) DN15 PN1/16 weld neck flange; DIN 2638 type E face /8 (455) 4 1/8 (15) DN25 PN4 weld neck flange; DIN 2635 type C face /2 (444) 4 1/2 (115) JIS 15mm 1K/2K weld neck raised face flange /16 (446) 3 3/4 (95) JIS 15mm 4K weld neck raised face flange /8 (473) 4 1/2 (115) 15mm DIN11851 aseptic coupling (47) Rd 34 1/8 R1S fitting options (1) 1-inch ANSI 15 lb weld neck raised face flange /16 (576) 4 1/4 (18) 1-inch ANSI 3 lb weld neck raised face flange /16 (588) 4 7/8 (124) 1-inch ANSI 6 lb weld neck raised face flange /16 (61) 4 7/8 (124) DN25 PN4 weld neck flange; DIN 2635 type C face /16 (544) 4 1/2 (115) DN25 PN1/16 weld neck flange; DIN 2638 type E face /16 (58) 5 1/2 (14) 1-inch sanitary fitting (Tri-Clamp compatible) /4 (54) 2 (5) JIS 25mm 1K/2K weld neck raised face flange /16 (55) 4 15/16 (125) JIS 25mm 4K weld neck raised face flange /16 (582) 5 1/8 (13) 25mm DIN11851 aseptic coupling /16 (522) Rd 52 1/6 (1) Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. (2) Dimension specified in table does NOT include fitting length. For installation, modify Dim. A value to include fitting. See pages 11, 12, and Micro Motion R-Series Flowmeter

15 Fittings for R-Series flowmeters continued R2S fitting options (1) Fitting code Dim. A face-to-face Dim B. outside diam. 1 1/2-inch ANSI 15 lb weld neck raised face flange /4 (629) 5 (127) 1 1/2-inch ANSI 3 lb weld neck raised face flange /4 (642) 6 1/8 (155) 1 1/2-inch ANSI 6 lb weld neck raised face flange /4 (654) 6 1/8 (155) 2-inch ANSI 15 lb weld neck raised face flange /8 (632) 6 (152) 2-inch ANSI 3 lb weld neck raised face flange /8 (645) 6 1/2 (165) 2-inch ANSI 6 lb weld neck raised face flange /8 (664) 6 1/2 (165) DN4 PN4 weld neck; DIN 2635 type C face /16 (598) 5 15/16 (15) DN5 PN4 weld neck; DIN 2635 type C face /8 (6) 6 1/2 (165) DN5 PN1 weld neck; DIN 2637 type E face /4 (641) 7 11/16 (195) DN5 PN16 weld neck; DIN 2638 type E face /16 (655) 7 11/16 (195) JIS 4mm 1K weld neck raised face flange /16 (595) 5 1/2 (14) JIS 4mm 2K weld neck raised face flange /16 (595) 5 1/2 (14) JIS 5mm 1K weld neck raised face flange /16 (595) 6 1/8 (155) JIS 5mm 2K weld neck raised face flange /8 (6) 6 1/8 (155) JIS 5mm 4K weld neck raised face flange /16 (646) 6 1/2 (165) 1 1/2-inch sanitary fitting (Tri-Clamp compatible) /4 (591) 2 (5) 2-inch sanitary fitting (Tri-Clamp compatible) /8 (581) 2 1/2 (64) 4mm DIN11851 aseptic coupling /16 (589) Rd 65 1/6 5mm DIN11851 aseptic coupling /4 (591) Rd 78 1/6 (1) Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Fittings for R-Series Model R25P high-pressure flowmeter Fitting code Dim. A face-to-face Dim B. outside diam. 15 mm DIN PN1/16 weld neck, DIN 2638, type E face /16 (41) 4 1/8 (15) 1/2-inch NPT female CAJON size 8 VCO fitting (356) (1) not applicable (1) Dimension specified in table does NOT include fitting length. For installation, modify Dim. A value to include fitting. See pages 11, 12, and 13. Micro Motion R-Series Flowmeter 15

16 Ordering information Model R25S R5S R1S R2S Product description Standard sensor models R-Series sensor; 1/4-inch; 316L stainless steel R-Series sensor; 1/2-inch; 316L stainless steel R-Series sensor; 1-inch; 316L stainless steel R-Series sensor; 2-inch; 316L stainless steel R25P High-pressure models R-Series sensor; 1/4-inch; 316L stainless steel; 23 psi tube rating Code Process connection ### See fittings option tables on pages Code Case options N Standard case Code Electronics interface Q 4-wire epoxy-painted aluminum integral core processor for remotely mounted transmitter with MVD Technology A 4-wire stainless steel integral core processor for remotely mounted transmitter with MVD Technology V 4-wire epoxy-painted aluminum integral core processor with extended mount for remotely mounted transmitter with MVD Technology B 4-wire stainless steel integral core processor with extended mount for remotely mounted transmitter with MVD Technology C Integrally mounted Model 17 (all output options) or Model 27 (FOUNDATION fieldbus or Profibus-PA) transmitter W (1) D (1) Y (1) E (1) I Code MVD Solo; epoxy-painted aluminum integral core processor for direct host communication MVD Solo; stainless steel integral core processor for direct host communication MVD Solo; epoxy-painted aluminum integral core processor with extended mount for direct host communication MVD Solo; stainless steel integral core processor with extended mount for direct host communication Integrally mounted IFT973 transmitter Conduit connections B E F G Electronics interface codes Q, A, V, B, W, D, Y, and E (integral core processor) 1/2-inch NPT no gland M2 no gland Brass/nickel cable gland (cable diameter 8.5 to 1 mm) Stainless steel cable gland (cable diameter 8.5 to 1 mm) Electronics interface codes C or I (integrally mounted transmitter) A No gland Continued on next page (1) When electronics interface W, D, Y, or E is ordered with approval C, A, or Z, an MVD Direct Connect I.S. barrier is supplied. No barrier is supplied when ordered with approval codes M or N. 16 Micro Motion R-Series Flowmeter

17 Ordering information continued Code Approvals M Micro Motion standard no approval N Micro Motion standard / PED compliant C CSA (Canada only) A CSA (U.S.A. and Canada) not available with electronics interface code I U UL only available with electronics interface code I Z ATEX Equipment category 2 (Zone 1) / PED compliant Code Language A Danish quick reference and English manual D Dutch quick reference and English manual E English quick reference and English manual F French quick reference and French manual G German quick reference and German manual H Finnish quick reference and English manual I Italian quick reference and English manual J Japanese quick reference and English manual M Chinese quick reference and English manual N Norwegian quick reference and English manual O Polish quick reference and English manual P Portuguese quick reference and English manual R Russian quick reference and English manual S Spanish quick reference and Spanish manual W Swedish quick reference and English manual Code Future option 1 Z Reserved for future use Code Future option 2 Z Reserved for future use Code Future option 3 Z Reserved for future use Code Factory options Z Standard product X CEQ product R Restocked product (if available) Typical model number: R25S 113 N C A U E Z Z Z Z Micro Motion R-Series Flowmeter 17

18 18 Micro Motion R-Series Flowmeter

19 Micro Motion R-Series Flowmeter 19

20 24, Micro Motion, Inc. All rights reserved. P/N PS-363, Rev. B Due to Micro Motion s commitment to continuous improvement of our products, all specifications are subject to change without notice. Micro Motion is a registered trademark of Micro Motion, Inc. The Micro Motion and Emerson logos are trademarks of Emerson Electric Co. All other trademarks are property of their respective owners. For the latest Micro Motion product specifications, view the PRODUCTS section of our Web site at Micro Motion Inc. USA Worldwide Headquarters 77 Wter Circle Boulder, Colorado 831 T (33) (8) F (33) Micro Motion Europe Emerson Process Management Wiltonstraat KW Veenendaal The Netherlands T +31 () F +31 () Micro Motion Asia Emerson Process Management 1 Pandan Crescent Singapore Republic of Singapore T (65) F (65) Micro Motion United Kingdom Emerson Process Management Limited Horsfield Way Bredbury Industrial Estate Stockport SK6 2SU U.K. T F Micro Motion Japan Emerson Process Management Shinagawa NF Bldg. 5F 1-2-5, Higashi Shinagawa Shinagawa-ku Tokyo 14-2 Japan T (81) F (81) TM Micro Motion