User s manual. CN5345 Corded Telephone HCD2310(1)P/TSD

Transcription

1 User s manual CN5345 Corded Telephone HCD2310(1)P/TSD

2 Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on page 26 of this manual. Please thoroughly read this user s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product more easily. You can also visit our website or call our customer service hotline. Website: Customer service hotline: Save your sales receipt in case it is necessary to return your telephone for warranty service. Product Type: Corded Telephone China Product Model: HCD2310(1)P/TSD Corporate Model Number: CN VTech Telecommunications Ltd. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to VTech Telecommunications Ltd, Hong Kong SAR. Printed in China.

3 Parts checklist Save your sales receipt in the event warranty service is necessary. Your AT&T CN5345 package contains the following items. 用户手册 CN5345 按键电话机 ௲դԥ ୟ ג Ծऄ ߛऄ ऄઢছ ગ ޞ ލ ல ӭஔ ଏ Ո Ȍ HCD2310(1)P/TSD User s manual Telephone base Corded handset Telephone line cord Wall mount bracket Warranty Card

4 User s manual CN5345 Corded Telephone Table of contents Getting started...1 Installation...1 Quick reference guide - telephone base...2 Telephone base and charger installation...4 Telephone base installation...4 Installation options...5 Tabletop to wall mount installation...5 Wall mount to tabletop installation...6 Telephone base settings...7 Set date/time...7 Ringer volume...7 Ringer tone...7 Area code...7 PABX code...8 Dial mode...8 Key tone...9 Flash time...9 IP number...9 Telephone operation Telephone operation...10 Making a call...10 On hook dialing (predialing)...10 Answering a call...10 Ending a call...10 Handset speakerphone...10 Volume booster...11 Quiet mode...11 Keypad lock...11 Last number redial...12 Photo speed dial keys...13 Volume control...15 Mute...15 Directory About the directory...16 Capacity...16 Create a new directory entry...16 Create directory entries...17 Dialing keys...17 Review directory entries...17 Dial, delete or edit directory entries...18 Display dial...18 Delete a directory entry...18

5 Edit a directory entry...19 Delete all directory entries...19 Caller ID About caller ID...20 Review the call list...20 Dial a call list entry...20 Delete a call list entry...20 Delete all call list entries..20 Add new call block entry..21 Review the call block list..21 Delete a call block list entry...21 Delete all call block list entries...21 Telephone base screen icons...22 Telephone base alert tones...22 Troubleshooting...23 Maintenance...25 Taking care of your telephone...25 Important safety information...26 Safety information...26 Especially about cordless telephones...26 China RoHS...27

6 Getting started Installation You must install the telephone before use. STOP! See page 4 for easy instructions. Install the telephone base close to a telephone jack. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 5). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see page 4). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with protective stickers covering the handset and telephone base displays - remove them before use. For customer service or product information, visit our website at or call Avoid placing the telephone base too close to: Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or workbench. 1

7 Getting started Quick reference guide - telephone base IN USE LIGHT On when the telephone base is in use. IN-COMING CALL LIGHT On when there is an in-coming call. Flashes when the handset is registering to the telephone base. 黑名单 CALL BLOCK Press to enter the call block list. REDIAL LIST Press to show redial entries when the telephone base is not in use. Press to scroll down while in menus. CALL LIST Press to show call list entries when the handset is not in use. Press to scroll up while in menus. DIRECTORY Press to enter the directory number entry screen when the telephone base is not in use. 设置 / 时钟 SET / ALARM Press to confirm and save an entry. When idle, press and hold to enter the menu to set date and time. 返回 / 取消 RETURN / CANCEL While in a menu, press to return to idle mode. Press and hold to dial your IP number when the telephone base is not in use. Press and hold to set the current predial number as IP number. 2 VOLUME BOOSTER Press to turn on or off the audio boost during a call using the corded handset.

8 Getting started Quick reference guide - telephone base 铃声 Press to switch to the next ringer melody. Press and hold to lock or unlock the keypad when idle. During a call, press to switch to tone dialing. FLASH While entering numbers in predialing mode, press to insert a flash. During a call, press to send a flash signal. MUTE / DELETE During a call, press to mute or end mute the microphone. While editing or predialing, press to delete or digits; or press and hold to delete all digits. PHOTO SPEED DIAL KEYS (1/2/3) Press to dial the number saved in the direct memory location. Press and hold to enter the direct memory location for number inputting or editing. Press and hold to save the input number to the photo speed dial key when predialing. + VOLUME + Press to adjust the listening volume when the phone is not in use or during a call. Press to adjust the ringer volume of earpiece or speakerphone during an in-coming call. SPEAKER Press to make or answer a call using the speakerphone. Press to switch between the speakerphone and the corded handset during a call in earpiece mode. (pound key) Press and hold to turn on or off the ringer when idle. 3

9 Getting started Telephone base and charger installation Install the telephone base and charger, as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 5 for details. Telephone base installation Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. Route the telephone line cord through this slot. Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base. Plug the corded handset cord into the corded handset jack on the back of the telephone base. Click the wall mount bracket securely into the mounting slots for tabletop use. IMPORTANT INFORMATION Use only the telephone line cord supplied with this product.

10 Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, follow the steps to connect the telephone base with a standard dual-stud telephone wall mounting plate. You may need a professional to install the mounting plate. Tabletop to wall mount installation 1. Unplug the telephone line cord from the wall jack (or DSL filter). 2. Put the corded handset aside. Hold down the switch hook on the telephone base, and then slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180 degrees. Then, replace the handset tab into the slot until it locks into position. 3. Press down on the tabs of the wall mount bracket to release it from tabletop orientation. 4. Rotate the wall mount bracket down and push it into the telephone base until it clicks into place. 5. Plug the telephone line cord (or DSL filter) into the wall jack. Align the slots on the back of the telephone base with the studs of the wall mounting plate. 6. Slide the telephone base down until it locks securely. Bundle the telephone line cord neatly with the twist tie

11 Getting started Installation options Wall mount to tabletop installation 1. Unplug the telephone line cord from the wall jack (or DSL filter). If the telephone line cord is bundled, untie it first. Push the telephone base up to remove it from wall. 2. Put the corded handset aside. Hold down the switch hook on the telephone base, and then slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180 degrees. Then, replace the handset tab into the slot until it locks into position. 3. Gently pull upward to release the wall mount bracket. Rotate the wall mount bracket up to tabletop position and push it into the telephone base until it clicks into place. 4. Plug the telephone line cord (or DSL filter) into the wall jack. Bundle the telephone line cord neatly with the twist tie if necessary

12 Telephone settings Telephone base settings Set date/time If you subscribe to caller ID service, the day, month and time are set automatically with each in-coming call. The year must be set so that the day of the week can be calculated from the caller ID information. After a power failure, you will need to set the date and time. 1. Press and hold 设置 / 时钟 in idle mode to enter the date and time setting mode. 2. Use the dialing keys to enter the year, month, and time. Then, press or to scroll to 上午 or 下午. 3. Press 设置 / 时钟 to save the setting. Press 返回 / 取消 to return to the idle mode. Ringer volume You can set the ringer volume for the telephone base. Press + in idle mode to adjust the ringer volume. Press 设置 / 时钟 to save the setting. Ringer tone You can choose a ringer melody from five melodies. Press 铃声 in idle mode to switch to the next melody. Press 设置 / 时钟 to save the setting. Area code You can set an area code of your local area on the telephone base. When you receive an in-coming call from your local area, the calling number that has been saved in your call list will not show the area code. 1. Press 设置 / 时钟 in idle mode. The display shows SET_AREACODE. 2. Use the dialing keys to enter the area code, with a maximum of 5 digits. 3. Press 设置 / 时钟 to save the setting. Press 返回 / 取消 to return to the idle mode. 7

13 Telephone settings Telephone base settings PABX code If your office uses PABX (Private Automated Branch Exchange) system to operate, when you dial an external number, you will need to input a PABX code first. You can set the PABX code on the telephone base, so that the PABX code will be inserted as a prefix before the external number, when you make a external call. 1. Press 设置 / 时钟 in idle mode, and then press or to scroll to SET_PABXCODE. 2. Press 设置 / 时钟. 3. Use the dialing keys to enter the PABX code, with a maximum of 2 digits. 4. Press 设置 / 时钟 to save the setting. Press 返回 / 取消 to return to the idle mode. Dial mode The default value of dial mode that is preset in your phone should be the best suited for your country network and therefore you are not suggested to change it. If you need to change it, consult your local service provider for getting the correct settings of this feature. 1. Press 设置 / 时钟, and then press or to scroll to SET_DIALMODE. 2. Press 设置 / 时钟. 3. Press or to scroll to TONE or PULSE. 4. Press 设置 / 时钟 to save the setting. Press 返回 / 取消 to return to the idle mode. 8

14 Telephone settings Telephone base settings Key tone You can turn the telephone base key tone on or off. 1. Press 设置 / 时钟, and then press or to scroll to SET_KEYTONE. 2. Press 设置 / 时钟. 3. Press or to scroll to ON 或 OFF. 4. Press 设置 / 时钟 to save the setting. Press 返回 / 取消 to return to the idle mode. Flash time The default value of flash time that is preset in your phone should be the best suited for your country network and therefore you are not suggested to change it. If you need to change it, consult your local service provider for getting the correct settings of this feature. Press 闪断 in idle mode repeatedly to switch the flash time to FLASH_LONG, FLASH_MID, or FLASH_SHORT. Press 设置 / 时钟 to save the setting. IP number You can store an IP number on the telephone base for quick dialing (the default IP number is 17909). To save an IP number: 1. Use the dialing keys to enter a IP number in idle mode. 2. Press and hold 1 to save the displayed number as the IP number. If you have not set an IP number yet, when you press and hold 1 in idle mode, the display will show EMPTY, and then return to the idle mode. When you have stored an IP number, you can choose one of the following ways to dial the IP number. To dial the IP number: Lift the handset, or press. Then, press and hold 1 and use the dialing keys to enter the number you wish to call. While reviewing the call list or redial list, press and hold 1 to insert the IP number as a prefix of the number you wish to call. The call will be dialled out automatically. 9

15 Telephone operation Telephone operation Making a call Lift the corded handset or press, and then enter the telephone number. NOTE: The screen displays the elapsed time as you talk (in hours, minutes and seconds). On hook dialing (predialing) 1. Enter the telephone number Press to make corrections when entering the phone number. 2. Lift the corded handset or press to dial. NOTE: The screen displays the elapsed time as you talk (in hours, minutes and seconds) Answering a call Lift the corded handset or press to answer a call. Ending a call Return the corded handset to the telephone base, or press to end a call. Handset speakerphone On a call using the corded handset: Press on the telephone base to switch between normal corded handset use and the speakerphone. On a call using the telephone base: Press on the telephone base to end a call. 10

16 Telephone operation Telephone operation Volume booster The volume booster feature makes the listening volume louder and clearer on the earpieces of corded handsets. Using the corded handset: To turn the volume booster feature on in the corded handset earpiece : Press to turn on the booster feature at any time while you are on a call. The screen shows. To turn the volume booster feature off in the corded handset earpiece : Press again to turn off the booster feature and return the handset volume to normal level, disappears on the screen. Quiet mode When quiet mode is turned on, the telephone silences all sounds (except the paging tone). After you turn on quiet mode, this feature activates immediately. To turn quiet mode on: Press and hold the 静音 icon. To turn quiet mode off: While quiet mode is on, press and hold screen. Keypad lock in idle mode to enter the quiet mode. The screen displays. The 静音 icon disappears on the You can lock the keypad to prevent accidental dialing while carrying the handset around. To turn keypad lock on: Press and hold in idle mode to turn on the keypad lock. The screen displays the 键盘已锁 icon. To turn keypad lock off: While keypad lock is on, press and hold the screen.. The 键盘已锁 icon disappears on 11

17 Telephone operation Telephone operation Last number redial The telephone base stores the last 30 telephone numbers dialed. To view the five most recently dialed numbers: To display the most recently called number, press. To view up to 30 recently called numbers, press, and then or repeatedly. The telephone beeps once at the end of the list. Press 退出 to exit. To redial a number: To dial the displayed number, lift the corded handset or press telephone base. To delete a redial entry: While the screen displays the desired number, press return to the previous menu. There is a confirmation tone. To delete all redial entries: While the screen displays a number, press and hold return to the previous menu. There is a confirmation tone. on the to delete and to delete and 12

18 Telephone operation Telephone operation Photo speed dial keys You can store a number to one of the three photo speed dial keys locations on the telephone base. This feature will be convenient when you want to dial a certain number more quickly. To set a photo speed dial key: 1. In idle mode, press and hold the photo speed dial key 1, 2, or 3 on the right side of the telephone base. 2. Use the dialing keys to enter the telephone number. Press Press and hold to erase a digit. to erase all digits. Press and hold 0 to enter a dialing pause (a P appears). 3. Press to save the setting and return to the previous menu. There is a confirmation tone. 1. Use the dialing keys to enter the telephone number. Press Press and hold to erase a digit. to erase all digits. Press and hold 0 to enter a dialing pause (a P appears). 2. Press and hold the photo speed dial key 1, 2, or 3 on the right side of the telephone base to save the setting and return to the previous menu. There is a confirmation tone. To dial from a speed dial key: 1. In idle mode, press the photo speed dial key 1, 2, or 3 on the right side of the telephone base. 2. Lift the corded handset or press to dial. -OR- -OR- 1. Lift the corded handset or press to take the line. 2. Press the photo speed dial key 1, 2, or 3 on the right side of the telephone base to dial. 13

19 Telephone operation Telephone operation To add a photo: Using the telephone base: You can add a desired photo into the photo speed dial compartment, or write the contact name on the photo speed dial card. 1. Flip open the photo speed dial compartment cover and take out the photo speed dial card. 20mm mm 2. Use the photo speed dial card as a tool to crop your desired photo. 3. Put the cropped photo into the photo speed dial compartment. Then flip down the photo speed dial compartment cover. 14

20 Telephone operation Telephone operation Volume control You can set the listening volume to one of five levels. Using the telephone base: While on a call, press + to adjust the listening volume. Mute NOTE: Cordless handset, corded handset, and speakerphone volume settings are independent. Use the mute function to turn off the microphone. You can hear the caller, but the caller cannot hear you. To mute a call: While on a call, press. The display shows 静音. To end mute a call: Press again. 静音 disappears from the display. 15

21 Directory About the directory Capacity The telephone base directory can store up to 200 entries, with a maximum of 24 digits for telephone numbers. Create a new directory entry 1. Use the dialing keys to enter a telephone number. 2. Press in idle mode to enter the directory. 3. Use the dialing keys to edit the telephone number, if necessary. Press 或 move the cursor to the right or left. Press Press and hold to erase a character. to erase all characters. 4. Press 设置 / 时钟 to proceed to the name. 5. Use dialing keys to enter a name when prompted. Each time you press a key, the character on the keys appears. Additional key presses produce other characters on that key. See the chart on next page. Press or to move the cursor to the right or left. Press 0 to add a space. Press Press and hold to erase a character. to erase all characters. 6. Press 设置 / 时钟, and then press or to choose a ringer melody. 7. Press 设置 / 时钟 to store your new directory entry and return to the previous menu. There is a confirmation tone. 16

22 Directory Create directory entries Dialing keys Dialing keys Characters by number of key presses A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P Q R S 7 8 T U V 8 9 W X Y Z 9 0 space 0 * *? / \ < > # #, - & Review directory entries 1. Press in idle mode to enter the directory. 2. Press or to browse through the directory. NOTE: If there are no directory entries. EMPTY appears on the screen. 17

23 Directory Dial, delete or edit directory entries To dial, delete or edit a directory entry (name and number), the entry must be displayed on the screen. Refer to Review the directory to show an entry. Display dial Lift the corded handset or press to answer a call. Delete a directory entry 1. Press in idle mode to enter the directory. 2. Press or to scroll to the desired directory entry 3. Press to confirm delete. The display shows DELETE?. 4. Press 设置 / 时钟 to confirm delete. NOTE: You cannot retrieve a deleted entry. 18

24 Directory Dial, delete or edit directory entries Edit a directory entry 1. Press in idle mode to enter the directory. 2. Press or to scroll to the desired directory entry, then press 设置 / 时钟. 3. Use the dialing keys to edit the telephone number. Press 或 move the cursor to the right or left. Press Press and hold to erase a character. to erase all characters. 4. Press 设置 / 时钟 to proceed to the name. 5. Use dialing keys to edit the name when prompted. Each time you press a key, the character on the keys appears. Additional key presses produce other characters on that key. See the chart on page 19. Press or to move the cursor to the right or left. Press 0 to add a space. Press Press and hold to erase a character. to erase all characters. 6. Press 设置 / 时钟, and then press or to choose a ringer melody. 7. Press 设置 / 时钟 to store your updated directory entry and return to the previous menu. There is a confirmation tone. Delete all directory entries 1. Press in idle mode to enter the directory. 2. Press and hold. The display shows DELETE ALL?. 3. Press 设置 / 时钟 to confirm delete. 19

25 Caller ID About caller ID This feature is available if you have subscribed to the caller ID service provided by your telephone service provider. Your phone can store up to 99 received calls with date/time information in the call list. The number will be shown on the handset screen when the phone is ringing. If the number matches with one of the entries in your directory, the caller s name stored in the directory will be displayed alternatively with the number. The handset will ring with the melody associated with that directory entry. Caller ID operation Review the call list Review the call list to find out who called, to return the call, or to copy the caller s name and number into your directory. All received calls are saved in the call list, with the latest call shown at the top of the list. When the call list is full, the oldest call will be replaced by a new call. EMPTY appears in the cordless handset screen if there are no records in the call list. 1. Press in idle mode to enter the call list. 2. Press or to scroll through the call list. Dial a call list entry Lift the corded handset or press to answer a call. Delete a call list entry 1. Press in idle mode to enter the call list. 2. Press or to scroll to the desired call list entry 3. Press to confirm delete. The display shows DELETE?. 4. Press 设置 / 时钟 to confirm delete. Delete all call list entries 1. Press in idle mode to enter the call list. 2. Press and hold. The display shows DELETE ALL?. 3. Press 设置 / 时钟 to confirm delete. 20

26 Caller ID Call block Your phone can store up to 20 call block entries. When you receive an in-coming call from the number that had been stored in the call block list, your phone will ring once, and then block the call automatically. The display will show BLOCKED CALL. When the call is blocked, the caller will hear a busy tone. Add new call block entry 1. Use dialing keys to enter the number to block. 2. Press 黑名单 to save the new call block entry. Review the call block list 1. Press 黑名单 in idle mode to enter the call block list. 2. Press or to scroll through the call block list. NOTE: If there are no call block list entries. EMPTY appears on the screen. Delete a call block list entry 1. Press 黑名单 in idle mode to enter the call block list. 2. Press or to scroll to the desired call block list entry 3. Press to confirm delete. The display shows DELETE?. 4. Press 设置 / 时钟 to confirm delete. NOTE: You cannot retrieve a deleted entry. Delete all call block list entries 1. Press in idle mode to enter the call block list. 2. Press and hold. The display shows DELETE ALL?. 3. Press 设置 / 时钟 to confirm delete. 21

27 Appendix Alert tones and lights Telephone base screen icons 对讲电话簿静音免打扰留言通话中免提键盘已锁语音信箱黑名单去电来电未接 Intercom - an intercom call is connected successfully; icon flashes when there is an incoming intercom call or the intercom call is being put on hold. Directory - the directory is being viewed. Mute - the base microphone is off. Ringer off - the base ringer is off. Message - the answering system is on; flashes when there is a new messsage (not applicable to this model). Talk on - a call is in progress; flashes when there is an in-coming call. Speakerphone - the speakerphone is in use. Keypad locked - the keypad lock is activated. Booster - the corded handset earpiece audio booster is activated. Voic - new voic has been received but not yet read. Sequential number - the sequential number of the current entry inside the directory, call list, or redial list. Date - the current date, or the date information of the selected call list entry. Time - the current time, the time information of the selected call list entry, or the call connection time. Call block list - the call block list is being viewed. New message - there is a new missed call (dependent on network subscription). Redial list - the redial list is being viewed. Call list - the call list is being viewed. Missed call - the current call list entry is a missed call. Telephone base alert tones Key tone Tone of each key press. One short beep is emitted if key tone is turned on. 22

28 Appendix Troubleshooting If you have difficulty with your phone, please try the following suggestions. For Customer Service, visit our website at or call My telephone doesn t work at all. Make sure you plug the telephone line cord securely and firmly into the telephone base and the telephone wall jack. Reset the telephone base. Unplug the telephone line cord. Wait for approximately 15 seconds, and then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. I cannot dial out. Try all the suggestions, as mentioned above. Make sure you have a dial tone before dialing. The cordless handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room with less background noise. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). I hear other calls while using my phone. Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, call your telephone service provider. My phone does not ring when I receive a call. Make sure that the ringer is not off. Refer to Ringer volume on page 7 in this user s manual. Make sure you plug in the telephone line cord securely into the telephone base and the telephone jack. You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). 23

29 Appendix Troubleshooting Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply). Your line cord may be defective. Try installing a new line cord. My caller ID isn t working. Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone. The caller must be calling from an area that supports caller ID. Both your and your caller s telephone service providers must use caller ID compatible equipment. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 4). The filter prevents noise and caller ID problems resulting from DSL interference. Please contact your DSL service provider for more information about DSL filters. System does not receive caller ID when on a call. Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features works only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the charger. If it does not fix the problem, do the following (in the order listed): 1. Disconnect the cordless handset battery. 2. Wait a few minutes. 3. Connect telephone line cord to the telephone base and the telephone wall jack. 24

30 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so you must treat it with care. Avoid rough treatment. Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms. Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE TELEPHONE LINE CORD FROM THE WALL. Pull the unit out by the unplugged cord. 25

31 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the user s manual. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). Do not expose the telephone to direct sunlight or extreme cold environment. Do not put the telephone close to a heating source such as radiators, cookers, etc. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Unplug this product from the wall outlet and refer servicing to qualified technicians under the following conditions: When the telephone line cord is damaged or frayed. If the product does not operate normally by following the operating instructions. If the product has been dropped and the casing has been damaged. If the product exhibits a distinct change in performance. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the phone close to sites of flammable, explosive or toxic gas leakage. Especially about cordless telephones Electrical power: The telephone base of this cordless telephone must be connected to a working telephone wall jack. Calls cannot be made if the telephone base is unplugged, switched off, or if the telephone line cord is damaged. SAVE THESE INSTRUCTIONS 26

32 Appendix China RoHS 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr (VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 主机 同包装物品 选装件 : 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 标准规定的限量要求以下 : 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 标准规定的限量要求 本表中以 所表示的物质, 属于 欧盟 2003 年 2 月 RoHS 指令 中指出的以现在的科学观点来看该物质的去除或替代在技术上被认为是不可行的 且属于有关限制特定有害物质含有量的中华人民共和国 ( 除台湾 香港和澳门外 ) 电子信息产品污染控制重点管理目录 对象产品以外的物质 27

33 Appendix China RoHS 环保使用期限 : 本标志中的年数, 是根据 2006 年 2 月 28 日公布的 电子信息产品污染控制管理办法 和 SJ/T 电子信息产品污染控制标识要求, 适用于在中华人民共和国 ( 除台湾 香港和澳门外 ) 生产或进口的电子信息产品的 环保使用期限 在遵守使用说明书中记载的有关本产品安全和使用上的注意事项 且没有其他法律 规定的免责事由的情况下, 在从生产日开始的上述年限内, 产品中的有毒 有害物质或元素不会发生外泄或突变, 使用该产品不会对环境造成严重污染或对使用者人身 财产造成严重损害 环保使用期限 不是安全使用期限 尤其不同于基于电气性能安全 电磁安全等因素而被限定的使用期限 产品在适当地使用后予以废弃时, 希望依照有关电子信息产品的回收或再利用的法律或规定进行处理 注 : 该年限为 环保使用期限, 不是产品的质量保证期限 电球 电池 墨粉盒等附属品和产品一同包装的, 产品和附属品的环保使用期限可能不同 28

34 Manufacturer VTech Telecommunications (Shenzhen) Co., Ltd. No.5, Keji South 12th Road, Nanshan District, China Service Hotline: VTech Telecommunications Ltd. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to VTech Telecommunications Ltd, Hong Kong SAR. Printed in China. Issue 1.0 AT&T 06/16