EU DECLARATION OF CONFORMITY. other technical specifications in relation to which conformity is declared: EN : Amendment 11 : 2013

Size: px

Start display at page:

Download "EU DECLARATION OF CONFORMITY. other technical specifications in relation to which conformity is declared: EN : Amendment 11 : 2013"

Benjamin Holmes
5 years ago
Views:

1 No.EISWK0006A Original om Ron EU DECLARATION OF CONFORMITY 1. Product Models/Products: A22E Series 2. Name and address of the manufacturer: OMRON Corporation Shiokoji Horikawa Shimogyo-Ku. Kyoto Japan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer. 4. Objects of the declaration: A22E Series. Emergency Stop Pushbutton Switch 5. The objects of the declaration described above are in conformity with the relevant Union harmonization legislation: 2006/42/EC Machinery Directive 6. References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared: EN : Amendment 11 : 2013 Signed and on behalf of: OMRON Corporation Place and date of issue: A ir1 #yjp~& J[ dlltbp~j;;' ~c/ I 7 Signature: -~~ Name: ~inofimatsueda Function: Name and address of contact in EU OMRON Europe B.V. Quality & Environment Department Attn: Industrial Automation Company, Safety Division. Safety Product Management Group Manager J.J.P.W. Vogelaar. European Quality & Environment Manager Zilverenberq GM. 's-hertogenbosch. The Netherlands 113 GQ l51845al

2 No.EISWK0006A Additional information Type A22E Series, Emergency Stop Pushbutton Switch A22E D D D 0-0 I n m N VVIVllVDI IX I Basic type ll : Lighted type or Non-lighted type Blank : Non- Lighted type L : Lighted type (Available only for the 40-dia.push lock,turn-reset models.) ill : Head size /pushbutton color/lock and reset mechanism MP : 40 dia./ Red I Push-lock, Pull-reset LP : 60 dia./ Red I Push-lock, Pull-reset S : 30 dia./ Red I Push-lock, Turn-reset M : 40 dia./ Red I Push-lock, Turn-reset L : 60 dia./ Red I Push-lock, Turn-reset SK : 30 dia./ Red I Push-lock, Key-reset MK : 40 dia./ Red I Push-lock, Key-reset N : Light source Blank : Non-lighted 6D LED 6VDC 6A LED 6VAC 12A LED 12VAC/DC 24A LED 24VAC/DC T1 LED 24VAC/DC input voltage 1 OOVAC, with voltage reduction unit T2 LED 24VAC/DC input voltage 200VAC, with voltage reduction unit V : Number of Normally Open Contact 0 Without NO Contact 1 With 1-NO Contact 2 With 2-NO Contacts 3 With 3-NO Contacts 4 With 4-NO Contacts 5 With 5-NO Contacts 2/3 GQ Al

3 No.EISWK0006A VI : Number of Normally Closed Contact 1 With 1-NC Contact 2 With 2-NC Contacts 3 With 3-NC Contacts 4 With 4-NC Contacts 5 With 5-NC Contacts 6 With 6-NC Contacts vn : Contact material Blank AgNi or Ag+Cu S : AgNi+Au or Ag+Cu+Au vm : Switch unit Blank A22-10* or A22-01* are used. X A22-20* or A22-02* are used. IX : Customer code Blank : Standard AP : Customer code (Degree of protection: IP40) # : Customer code Maximum 6 digit number(s) and/or letter(s) 3/3 GQ l51845al

4 No.EISWK0005A Original om Ron EU DECLARATION OF CONFORMITY 1. Product Models/Products: A22E Series 2. Name and address of the manufacturer: OMRON Corporation Shiokoii Horikawa Shimogyo-Ku. Kyoto Japan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer. 4. Objects of the declaration: A22E Series. Pushbutton Switch 5. The objects of the declaration described above are in conformity with the relevant Union harmonization legislation: 2006/95/EC Low Voltage Directive (valid until19 April 2016). 2014/35/EU Low Voltage Directive (valid from 20April2016) 6. References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared: EN :2004+A1 :2009 Signed and on behalf of: OMRON Co: ration Place and date of issue:/fkt() Ja/i.J'l/ Signature: Name: Function: 2) J4nt--ft1;7 lo/6 ~ 2--L--- Yoshinori Matsueda Industrial Automation Company. Safety Division. Safety Product Management Group Manager Name and address of contact in EU OMRON Europe B.V. Quality & Environment Department Attn: J.J.P.W. Vogelaar. European Quality & Environment Manager Zilverenberg GM. 's-hertogenbosch. The Netherlands 1/4 GQ Al

5 No.EISWK0005A Additional information Type A22E Series Pushbutton Switch A22E 0-0DD I n m IV V VI Vll VIH IX I : Basic type ll : Lighted type or Non-lighted type Blank : Non- Lighted type L : Lighted type (Available only for the 40-dia.push lock,turn-reset models.) m : Head size /pushbutton color/lock and reset mechanism MYP L YP SY MY LY SYK MYK MP LP s M L SK MK : 40 dia./ Yellow I Push-lock, Pull-reset : 60 dia./ Yellow I Push-lock, Pull-reset : 30 dia./ Yellow I Push-lock, Turn-reset : 40 dia./ Yellow I Push-lock, Turn-reset : 60 dia./ Yellow I Push-lock, Turn-reset : 30 dia./ Yellow I Push-lock, Key-reset : 40 dia./ Yellow I Push-lock, Key-reset : 40 dia./ Red I Push-lock, Pull-reset : 60 dia./ Red I Push-lock, Pull-reset : 30 dia./ Red I Push-lock, Turn-reset : 40 dia./ Red I Push-lock, Turn-reset : 60 dia./ Red I Push-lock, Turn-reset : 30 dia./ Red I Push-lock, Key-reset : 40 dia./ Red I Push-lock, Key-reset IV : Light source Blank 6D 6A 12A 24A T1 T2 Non-lighted : LED 6VDC : LED 6VAC LED 12VAC/DC LED 24VAC/DC LED 24VAC/DC input voltage 1 OOVAC, with voltage reduction unit LED 24VAC/DC input voltage 200VAC, with voltage reduction unit 2/4 GQ l51845al

6 No.EISWK0005A V : Number of Normally Open Contact 0 Without NO Contact 1 With 1-NO Contact 2 With 2-NO Contacts 3 With 3-NO Contacts 4 With 4-NO Contacts 5 With 5-NO Contacts 6 With 6-NO Contacts VI : Number of Normally Closed Contact 0 Without NC Contact 1 With 1-NC Contact 2 With 2-NC Contacts 3 With 3-NC Contacts 4 With 4-NC Contacts 5 With 5-NC Contacts 6 With 6-NC Contacts VB : Contact material Blank AgNi or Ag+Cu S : AgNi+Au or Ag+Cu+Au VID : Switch unit Blank X A22-10* or A22-01* are used. A22-20* or A22-02* are used. IX : Customer code Blank : Standard AP : Customer code (Degree of protection: IP40) # : Customer code Maximum 6 digit number(s) and/or letter(s) Switch Unit A n m IV I : Basic type 3/4 GQ Al

7 No.EISWK0005A I1 : Contact form 01 SPST-NC 02 DPST-NC 20 DPST-NO 10 SPST-NO 11 : SPST-NC,SPST-NO ( For optional use only) ill : Contact material Blank : AgNi or Ag+Cu S : AgNi+Au or Ag+Cu+Au *Note 1; A22- IIIII can be replaceable for service parts. IV : Customer code Blank : Standard # : Customer code Max i mum 6 digit number(s) and/or letter(s) Lamp Unit A I I1 m Basic type I1 : Ratings of light source and input voltage TN T1 T11 T2 T22 Without voltage reduction unit LED 24VAC/DC input voltage 11 OVAC, with voltage reduction unit LED 24VAC/DC input voltage 120VAC, with voltage reduction unit LED 24VAC/DC input voltage 220VAC, with voltage reduction unit LED 24VAC/DC input voltage 240VAC, with voltage reduction unit *Note 2; A22-T11 and A22-T22 series are not used for Switches or Indicators in the previous page. m : Customer code Blank : Standard # : Customer code Max i mum 6 digit number(s) and/or letter(s) 4/4 GQ Al

8 CERTIFICATE No. B Holder of Certificate: Om ron Corporation Shiokoji Horikawa,Shimogyo-ku Production Facility(ies): Certification Mark: Product: Model(s): Parameters: Tested according to: Kyoto JAPAN Emergency switch off Emergency Stop Pushbutton Switch with Direct Opening Action A22E II- Ill - IV- V VI VII VIII - IX - X (See Certificate Attachment 1 for nomenclature) AC: DC: DC: DC: Protection class: Protection degree: 220VAC / 3.0A 50-60Hz (AC-15) 24VDC / 1.5A (DC-13) 125VDC I 0.55A (DC-13) 250VDC I 0.27A (DC-13) II IP6X or IP40 (for customer code X: AP only) (See suffix X of nomenclature in Attachment 1) Pollution degree: 3 Overvoltage category: Il l Conditional short circuit current: 100 A Electrical: Cycles Mechanical: Cycles Remark: When installing/inserting the equipment all requirements of the mentioned test standards must be fulfilled. EN :2004/A1:2009 EN :1997/A11 :2013 The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf. Test report no.: Valid until: Product Service. Date, Page 1 of 3 TOV SOD Product Service GmbH Zertifizierstelle RidlerstraBe Munchen Germany

9 Certificate Attachment 1 Certificate No. B ~ ~ Product Service Nomenclature: A22E II - Ill- IV - V VI VII VIII -IX- X I I: Basic type II: Ill: IV: Lighted type or Non-lighted type Blank: Non-lighted type L: Lighted type (Available only for 40-dia. push lock turn-reset models.) Head size I lock and reset mechanism MP: 40 dia. I Push-lock, Pull-reset LP: 60 dia. I Push-lock, Pull-reset S: 30 dia. I Push-lock, Turn-reset M: 40 dia. I Push-lock, Turn-reset L: 60 dia. I Push-lock, Turn-reset SK: 30 dia. I Push-lock, Key-reset MK: 40 dia. I Push-lock, Key-reset Light source Blank: Non-lighted 6D: LED 6VDC 6A: LED 6VAC 12A: LED 12VACIDC 24A: LED 24VACIDC T1: LED 24VACIDC input voltage 100VAC, with voltage reduction unit T2: LED 24VACIDC input voltage 200VAC, with voltage reduction unit V: Number of Normally Open Contact 0: Without NO Contact 1 : With 1-NO Contact 2: With 2-NO Contacts 3: With 3-NO Contacts 4: With 4-NO Contacts 5: With 5-NO Contacts VI : Number of Normally Closed Contact 1 : With 1-NC Contact 2: With 2-NC Contacts 3: With 3-NC Contacts 4: With 4-NC Contacts 5: With 5-NC Contacts 6: With 6-NC Contacts Page 2 of 3 TOV SOD Product Service GmbH Zertifizierstelle RidlerstraBe MOnchen Germany

10 Certificate Attachment 1 Certificate No. B Product Service VII: Contact material Blank: AgNi or Ag+Cu S: AgNi+Au or Ag+Cu+Au VIII: Switch unit Blank: A or A22-01 is used. X: A22-20 or A22-02 is used. IX: Pushbutton marking Blank: Standard EMO: EMO EMS: EMS X: Customer code Blank: Standard AP: Customer code (Degree of protection: IP40) #: Customer code (Maximum 6 digit number(s) and/or letter(s)) Page 3 of 3 TOV SOD Product Service GmbH Zertifizierste lle RidlerstraBe MUnchen Germany

11 CERTIFICATE No. B Holder of Certificate: Production Facility(ies): Certification Mark: Om ron Corporation Shiokoji Horikawa,Shimogyo-ku Kyoto JAPAN Product Service Product: Model(s): Parameters: Tested according to: Switches Pushbutton Switch with Direct Opening Action A22E II- Ill- IV- V VI VII VIII - IX (See Certificate Attachment 1 for nomenclature) AC: 220VAC /3.0A 50-60Hz (AC-15) Protection class: II Protection degree: IP6X or IP40 (See suffix IX of nomenclature in attachment 1) Pollution degree: 3 Overvoltage category: Ill Conditional short circuit current: 100 A Electrical: Cycles Mechanical: Cycles Remark: When installing/inserting the equipment all requirements of the mentioned test standards must be fulfilled. EN /A1 :2oog The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf. Test report no.: Date, Page 1 of 3 TOV SOD Product Service GmbH Zertifizierstelle Ridlerstra~e Munchen Germany

12 Certificate Attachment 1 Certificate No Product Service Nomenclature: A22E II- Ill- IV- V VI VII VIII- IX I I: Basic type II: Ill: IV: Lighted type or Non-lighted type Blank: Non-lighted type L: Lighted type (Available only for 40-dia. push lock turn-reset models.) Head size I lock and reset mechanism MYP: 40 dia./ Yellow I Push-lock, Pull-reset L YP: 60 dia./ Yellow I Push-lock, Pull-reset SY: 30 dia./ Yellow I Push-lock, Turn-reset MY: 40 dia./ Yellow I Push-lock, Turn-reset L Y: 60 dia./ Yellow I Push-lock, Turn-reset SYK: 30 dia./ Yellow I Push-lock, Key-reset MYK: 40 dia./ Yellow I Push-lock, Key-reset Light source Blank: Non-lighted 6D: LED 6VDC 6A: LED 6VAC 12A: LED 12VACIDC 24A: LED 24VACIDC T1 : LED 24VACIDC input voltage 1 OOVAC, with voltage reduction unit T2: LED 24VACIDC input voltage 200VAC, with voltage reduction unit V: Number of Normally Open Contact 0: Without NO Contact 1: With 1-NO Contact 2: With 2-NO Contacts 3: With 3-NO Contacts 4: With 4-NO Contacts 5: With 5-NO Contacts VI : Number of Normally Closed Contact 1: With 1-NC Contact 2: With 2-NC Contacts 3: With 3-NC Contacts 4: With 4-NC Contacts 5: With 5-NC Contacts 6: With 6-NC Contacts Page 2 of 3 TOV SOD Product Service GmbH Zertifizierstelle Ridle r stra~e Munchen Germany

13 Certificate Attachment 1 Certificate No Product Service VII: Contact material Blank: AgNi or Ag+Cu S: AgNi+Au or Ag+Cu+Au VIII: Switch unit Blank: A22-10 or A22-01 is used. X: A22-20 or A22-02 is used. X: Customer code Blank: Standard AP: Customer code (Degree of protection: IP40) #: Customer code (Maximum 6 digit number(s) and/or letter(s)) Page 3 of \JV " TUV SUD Product Service GmbH Zertifizierstelle Ridlerstra!Se Mi.inchen Germany

14 OMRON AUTOMATION AND SAFETY THE AMERICAS HEADQUARTERS Chicago, IL USA OMRON CANADA, INC. HEAD OFFICE Toronto, ON, Canada OMRON ELECTRONICS DE MEXICO HEAD OFFICE México DF OMRON ELECTRONICS DE MEXICO SALES OFFICE Apodaca, N.L OMRON ARGENTINA SALES OFFICE Cono Sur OMRON CHILE SALES OFFICE Santiago OTHER OMRON LATIN AMERICA SALES OMRON ELETRÔNICA DO BRASIL LTDA HEAD OFFICE São Paulo, SP, Brasil OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. +31 (0) Authorized Distributor: Automation Control Systems Machine Automation Controllers (MAC) Programmable Controllers (PLC) Operator interfaces (HMI) Distributed I/O Software Drives & Motion Controls Servo & AC Drives Motion Controllers & Encoders Temperature & Process Controllers Single and Multi-loop Controllers Sensors & Vision Proximity Sensors Photoelectric Sensors Fiber-Optic Sensors Amplified Photomicrosensors Measurement Sensors Ultrasonic Sensors Vision Sensors Industrial Components RFID/Code Readers Relays Pushbuttons & Indicators Limit and Basic Switches Timers Counters Metering Devices Power Supplies Safety Laser Scanners Safety Mats Edges and Bumpers Programmable Safety Controllers Light Curtains Safety Relays Safety Interlock Switches J89I-E-01 11/14 Note: Specifications are subject to change Omron Electronics LLC Printed in U.S.A. Printed on recycled paper.

Guide. Description 1. Items. needed: of Sysmac. Studios. Caution useless if. Precautions. 2. Reset. Page 1 of 5

Guide. Description 1. Items. needed: of Sysmac. Studios. Caution useless if. Precautions. 2. Reset. Page 1 of 5 Connecting MX2 Inverter Drive to NX-Safety Quick Start Guide This guide discusses how to connect the MX2 drivee to NX safety. Description 1. Items needed: a. MX2-V1 Inverter Users Manual EN_201305_1585_E1_01,