"How-To-Order" Guide - Bioscrypt Biometric Readers

Transcription

1 "How-To-Order" Guide - Bioscrypt Biometric Readers Bioscrypt, a world renowned manufacturer of Biometric Access Control devices, has been the market leader for biometrics in access control since 2006, holding a market share of over 13%. Now under the wing of the Safran Group, Bioscrypt is now known as MorphoTrust USA. Even under this new banner Bioscrypt is still at the core, producing the reliable biometric systems that customers around the globe have come to trust and depend on. Bioscrypt s product offering is centered on a handful of biometric devices each of which can be ordered with a wide array of options. The myriad configurations available on these readers can lead to confusion in determining which model to order when specific features are required, especially when it comes to readers that integrate credentialing in combination with biometrics. These multi-factor authentication scenarios tend to create a headache for site supervisors, building managers and installers alike. In order to simplify the process, this How-To-Order guide is designed to assist in selecting the correct device and part number for the needs of your application. The current Bioscrypt line of products is divided into four device lines: 4G V-Station Reader The standard model of the 4G Series, offering a color LCD screen, full alphanumeric keypad, Biometric Fingerprint Scanner and an optional credential reader 4G PIV Station Reader A Government Class version of the popular V-Station, with support for a combination of biometrics and Personal Identity Verification (PIV) credentials and Transportation Worker Identification Credentials (TWIC) 4G V-Flex Reader The power of the 4G V-Station, including multi-factor authentication, without the LCD screen, keypad interface or bulky size, also available in Weather Resistant Models An advanced biometric solution that (as the name suggests) reads the veins in your finger, as opposed to reading your fingerprint. This method of biometric identification provides much higher levels of accuracy and is far more difficult to falsify These biometric devices can be configured with the following advanced options: P HID Proximity Credentials that operate over a 125kHz frequency, used primarily for access control applications only, typically with a short read range of only a few inches H HID iclass One of two supported MHz frequency based credentials, ideal for use in installations that already support the iclass smart card as an entry credential or installations where a combined access control and secondary data storage tool are required, such as linked bank cards for hotels or storing biometric data on the card for verification G MIFARE / DESFIRE The second of the two supported 13.56MHz frequency credentials, ideal for use in installations where MIFARE or DESFIRE cards are already deployed in an access control system or the format is preferred over iclass as a smart card option O OmniClass A specially designed HID card reader that can communicate with either iclass, MIFARE or DESFIRE credentials, ideal for installations that utilize any combination of the three credentialing types W Wireless Wireless communication over a local-area-network is integrated into the reader NW No Wiegand Output Wiegand communication is removed, for single door access control applications where the reader both authenticates and provides the response (unlocking door, lifting the gate, etc)

2 4G V-Station Readers 4G V-Station Reader (4GSTS ) The 4G V-Station is Bioscrypt s flagship product. Featuring a full color LCD screen, integrated alphanumeric keypad and robust software for administrating the device, coupled with some of the best biometrics in the industry and (unless purchasing the Base Model) the inclusion of a credential format for multi-factor authentication. The 4G V-Station is ideal for a plethora of applications, including access control and timeand-attendance centric functions. The 4G V-Station is intended for use in indoor environments. 4GSTS Base Model 4GSTSW Base Model w/ Wireless 4GSTSP 4GSTSPW w/ Wireless 4GSTSH HID iclass Model 4GSTSHW HID iclass Model w/ Wireless 4GSTSG MIFARE / DESFIRE Model 4GSTSGW 4G V-Station Lite Reader (4GSTL ) The 4G V-Station Lite is more than just the little brother for the 4G V-Station. The 4G V-Station Lite offers the same performance and reliability as the full-sized 4G V- Station, but in a more compact and convenient form factor. It features a 1.5 screen, 3 navigational keys and full keypad for dual factor authentication with the base model and multi-factor authentication when combined with a model that supports Proximity or the smart card standards. 4GSTL 4GSTLP 4GSTLO Base Model HID OmniProx Model 4GSTLNW 4GSTLPNW 4GSTLONW Base Model w/ No Wiegand Output w/ No Wiegand Output HID OmniProx Model w/ No Wiegand Output 4G V-Station Weather Resistant Reader (4GXSTS ) The Weather Resistant 4G V-Station offers the same performance as the standard V- Station, but with a housing that features a built-in hood and specialized components to resist adverse weather conditions, with a temperature range between -5 F and 140 F. The 4G V-Station is IP65 rated. 4GXSTS 4GXSTSP 4GXSTSH 4GXSTSG 4GXSTSW 4GXSTSPW 4GXSTSHW 4GXSTSGW Base Model w/ Wireless w/ Wireless HID iclass Model w/ Wireless

3 4G V-Station Extreme Outdoor Reader (ESTV ) The 4G V-Station Extreme is ideal for installations where the reader will be subject to constant and extreme weather conditions such as severe downpours, ice and snow. The 4G V-Station Extreme features the Lumidigm Sensor for consistent outdoor authentication, regardless of what the conditions are. It also features fake fingerprint and anti-spoofing capabilities to ensure access to only those who are supposed to have it. Its temperature range of -13 F to 158 F ensures that it will operate in subzero climates as well as the blazing heat. ESTV ESTVP ESTVH ESTVG ESTVW ESTVPW ESTVHW ESTVGW Base Model w/ Wireless w/ Wireless HID iclass Model w/ Wireless 4G V-Flex Readers 4G V-Flex Reader (4GFXS _ ) The 4G V-Flex Reader is the ideal secondary device in a Bioscrypt installation or an ideal primary device in installations where a keypad and LCD aren t required. The 4G V-Flex can handle Standalone Door Access Control (SDAC) functions just like its larger counterpart, but with half the size. It can also be remotely managed and has field replaceable sensors. 4GFXS 4GFXSP 4GFXSH 4GFXSG 4G V-Flex Lite Reader (4GFXLS ) The 4G V-Flex Lite is the smaller form factor version of the standard 4G V-Flex. It s the perfect choice for biometric access control when looking for a reader that can perform like the rest of the 4G V-Series, but space is an issue. The smallest reader in the entire line, the 4G V-Flex Lite is ideal for mullion or single gang mounting and can operate in tandem with the 4G SecureControl I/O panel for additional security. 4GFXLS Base Model 4GFXLSNW Base Model w/ No Wiegand Output 4GFXLSP 4GFXLSPNW w/ No Wiegand Output 4GFXLSO HID OmniClass Model 4GFXLSONW HID OmniClass Model w/ No Wiegand Output

4 4G V-Flex Weather Resistant Reader (XFXS ) The Weather Resistant 4G V-Flex offers the same dependable performance as the standard 4G V-Flex, but with a weather resistant body that can withstand temperatures between -5 F and 140 F. The 4G V-Flex is IP65 rated for outdoor use and features the same Single Door Access Control functionality as the standard 4G V- Flex, as well as being full IP and POE enabled. XFXS XFXSP XFXSH XFXSG (4GFVST ) The is one of Bioscrypt s most revolutionary technologies. Instead of reading the user s fingerprint, it scans the entire finger using near-infrared light to map the veins and verify this biometric data against a template. This technology makes it nearly impossible to duplicate or forge biometric data to gain unauthorized access, providing the highest level of security in Bioscrypt s product offerings to date. The 4G FingerVein options provide up to triple-factor authentication when including credentials, a pin and your biometric data. 4GFVST 4GFVSTP 4GFVSTH 4GFVSTG 4GFVSTW 4GFVSTPW 4GFVSTHW 4GFVSTGW Base Model w/ Wireless w/ Wireless HID iclass Model w/ Wireless 4G PIV-TWIC Reader 4G PIV-TWIC Station The 4G PIV-TWIC Station is a government level fingerprint reader, providing authentication for government issued Personal Identity Verification (PIV) credentials as well as Transportation Worker Identification Credentials (TWIC). With support for MIFARE and DESFIRE credentials, this is an ideal triple-factor authentication device for installations that require use of the aforementioned government credentials. The 4G PIV-TWIC station features a 2.5 inch color screen, is full IP and POE enabled, is TWIC ICE approved and utilizes a FIPS201 Approved 500dpi Sensor. 4G PIV-TWIC (G) 4G PIV-TWIC (G, GC) Contactless Smart Card Reader Contact and Contactless Smart Card Reader 4G PIV-TWIC (G, W) 4G PIV-TWIC (G, GC, W) Contactless Smart Card Reader w/ Wireless Contact and Contactless Smart Card Reader w/ Wireless

5 4G PIV-TWIC Station Extreme The 4G PIV-TWIC Station Extreme is the toughest of the tough, with an IP65 rating for extreme weather environment such as downpours, ice and snow. The 4G PIV-TWIC Extreme provides the same performance and features as the standard 4G PIV-TWIC Station, but instead uses a Lumidigm Sensor for severe weather authentication, which can identify users with wet, greasy, severely dry, cut or damaged fingers, with support for the same PIV and TWIC credentials as well. 4G PIV-TWIC Extreme (G) Contactless Smart Card Reader 4G PIV-TWIC Extreme (G, MG) Contactless Smart Card Reader & Mag-Stripe Reader 4G PIV-TWIC Extreme (G, GC) Contact and Contactless Smart Card Reader 4G PIV-TWIC Extreme (G, GC, MG) Contact & Contactless Smart Card Reader & Mag-Stripe Reader 4G Series Additional Products 4G CR-Pass (4GCR _ ) The 4G CR-Pass is an IP enabled card reader that is designed to work with SecureControl and your other 4G Series devices to function as a satellite card reader in a mixed biometric and non-biometric system. The CR-Pass features IP connectivity and is IP65 rated for indoor or outdoor use. 4GCRP 4GCRPNW w/ No Wiegand Output 4GCRO OmniClass Model 4GCRONW OmniClass Model w/ No Wiegand Output Desktop Stands Desktop stands available for 4G Series devices, to enable convenient enrollment DSK4GST DSK4GFX DSK4GFV Desktop Stand, V-Station Deskstop Stand, V-Flex Deskstop Stand, FingerVein SecureControl The 4G SecureControl is an input/output door control module for use with the CR-Pass and 4G Series Lite readers, with up to two readers (two doors) per SecureControl. Two SecureControl modules can be linked together to control up to four doors. SecureAdmin / SecureAdminLite SecureAdmin and SecureAdminLite are the software administration packages for Bioscrypt products, allowing you to remotely view all transactions performed on a device, as well as enroll and deactivate users and other various functions