AIRWORTHINESS NOTICE

Transcription

1 AIRWORTHINESS NOTICE VERSION :.0 DATE OF IMPLEMENTATION : -0-0 OFFICE OF PRIME INTEREST : Airworthiness Directorate /0/0 AWNOT-079-AWEG-.0

2 /0/0 AWNOT-079-AWEG-.0

3 A. AUTHORITY: A. This Airworthiness Notice is issued under the authority vested in DG CAA vide Rule No. of Civil Aviation Rules, 99 (CARs,99). B. PURPOSE: B. This notice is intended to provide criteria to ANO-7 training organisations, for the assessment of qualifications, competencies and skills for the appointment of Instructors, Knowledge Examiners (KE), Practical Assessors (PA) and Form- holders. This notice also provides guidance for the Continuance/Revalidation of existing Instructors, Knowledge Examiners and Practical Assessors. C. SCOPE: C. This AWNOT is applicable to all instructors, examiners and assessors exercising their privileges in an ANO-7 approved Maintenance Training Organizations (MTO) or in an approved maintenance organization under the umbrella of ANO-7. D. DESCRIPTION: D. DEFINITIONS: The following terms when used in this AWNOT have the meanings, assigned to them respectively. However, any term used in this AWNOT but not defined herein shall have the same meaning as given in the Civil Aviation Ordinance 90, Pakistan Civil Aviation Authority Ordinance 98, Civil Aviation Rules,99 (CARs,99) and/ or relevant ICAO Annexes, as the case may be, accordingly. D.. INSTRUCTOR: A person, who will deliver ANO-0 module, ANO-0 element or part thereof. The instructor may not necessarily be the person involved in drafting of the course material, however; he/she must be involved at some point into the organization of the lessons, creation of notes, multimedia presentation slides, etc. D.. EXAMINER: A person who determines the level of theoretical knowledge of the trainees on a particular module, element or part thereof. The function may include the drafting and/or the selection of questions (MCQs and Essays), the performance of the examination exercise itself for essay questions, the evaluation of the correctness of answers and the final judgment regarding the level of knowledge demonstrated by the candidate. D.3. INVIGILATOR: A person solely supervising an exam session (for smooth conduct, fairness and transparency) consisting of pre-selected questions (MCQs and Essay) are not considered as examiners but are considered as support staffs, i.e. invigilators. They are not subject to the knowledge and experience requirements, but need to be trained in the examination procedures described in the MTOE and TPM. D.. PRACTICAL ASSESSOR: A person who determines the level of practical knowledge/ skills of the trainees on a particular module, element or part thereof. The function may include the drafting and/ or the selection of practical tasks, the performance of the practical assessment itself, and the evaluation of the practical abilities on the tasks covered by the assessment. D.. SCOPE OF PRIVILEGES: The part of a course that an individual is approved to instruct, examine or assess; this scope can cover a full course or be reduced to a particular module or element. /0/0 Page of 7 AWNOT-079-AWEG-.0

4 D.. REVALIDATION CHECK: A periodic review carried out by the training organisation to check instructors recency in accordance with ANO 7 regulation. D.7. UPDATE TRAINING: The scope of this training can include, but is not restricted to changes in technologies, new instructional techniques and knowledge of aircraft maintenance processes etc. D. INTRODUCTION: D.. Refer Sub-Para (f) of ANO.7.A.0 regarding Personnel requirements, which states that, The experience and qualifications of instructors, knowledge examiners and practical assessors shall be established in accordance with criteria published or in accordance with a procedure and to a standard agreed by PCAA. D.. Through this notice, PCAA has set the criteria for ANO-7 organisations, which is build around qualities or skills that are considered as essential for a candidate to qualify to a position of instructor, knowledge examiner or practical assessor. These apply to concerned staff of the Maintenance Training Organization approved under ANO-7, as well as to any instructor, examiner and assessor sub-contracted by the approved organization. D.3. All instructors, examiners and practical assessors, whether permanently or temporally employed, must have completed PCAA approved Train the Trainer (TtT) course (except as otherwise specified) and be able to demonstrate an understanding of ANO-0 and ANO-7 regulatory requirements. Additionally they should have a practical working knowledge of the Maintenance Training Organisation Exposition (MTOE) and associated training procedures. D3. QUALIFICATIONS AND EXPERIENCE REQUIREMENTS OF INSTRUCTORS, KNOWLEDGE EXAMINERS AND PRACTICAL ASSESSORS D3.. INSTRUCTORS: D3... GENERAL: To be deemed as competent, the instructor should be: Fully knowledgeable about ANO-0 elements that are assigned to their scope of instruction, about the rules and specific procedures of Maintenance Training Organisation Exposition (MTOE) and Training Procedures Manual (TPM) governing the teaching in a controlled environment Pedagogic, and should know how to organize a lesson and how to efficiently deliver a course that clearly highlights the fundamental points. Convincing, and therefore should have the required experience proving that he/she has a good command of the subjects taught, at least sufficient to convince trainees that for instance may themselves have a pre-existing experience of the aircraft types to be taught. He/she should be in a position to understand and possibly answer a number of questions asked by trainees, and should be able to expose the links between the academic training delivered to the trainees and the actual maintenance tasks that they will have to accomplish all along their career. Proficient, and in particular should be familiar with the tools or the training techniques used by the training organization to support the lessons; they should also have a good command of English language as used in aviation literature. /0/0 Page of 7 AWNOT-079-AWEG-.0

5 D3... QUALIFICATION: Experience and qualification requirements for basic and type Knowledge Instructors (KIs) and Knowledge Examiners (KEs) are given in Appendix A & B and experience and qualification requirements for basic and type Practical Instructors (PIs) and Practical Assessors (PAs) are given in Appendix C & D of this notice. D3..3. UPDATE TRAINING: Update training should consist of minimum 3 hours; it may be subdivided during months into more than one element and may include such activities as awareness of the latest training techniques, any specific technical upgrade to the aircraft type, attendance at relevant lectures and symposiums, etc. Records should indicate when update training was scheduled and when it took place for each instructor/examiner and practical assessor. D3.. KNOWLEDGE EXAMINERS: D3... GENERAL: To be deemed as competent, the knowledge examiners should be: Fully knowledgeable about the ANO-0 elements that are assigned to their scope of examination, but also about the rules and specific procedures governing the organizations & performance of exams in a controlled environment Trained to examination techniques, the examiner should be fully aware of the aim of the examination and conduct an examination in such a way that the true abilities of the candidate are demonstrated. These involve technical knowledge, but through the essay questions, the examiner should also determine the ability for the candidate to satisfactorily cope with the necessary documentary phase of a maintenance action. The examiner should remain neutral at all times, and behave in a manner that will not influence or prejudice the final result of the examination, for example by providing undue assistance or clarification to a candidate. Proficient, and in particular should be familiar with the tools or the examination techniques used by the training organization to perform the exams i.e. examination software, etc. Able to compile both written and multiple choice question papers and, in the case of the written papers, supply a model answer sheet detailing the marking guide Able to mark and analyze the students responses and provide feedback to the Examination Manager and Quality manager, detailing any inconsistencies with the examination results or process D3... Examination Manager must assess knowledge examiners and document their competency and maintain their record as part of the organisation s assessment process prior to detailing them for any assignment. D3..3. All Knowledge examiners should be listed or referred in Part. of the MTOE. D3... A Knowledge Examiner may also hold other positions within the training organisation, i.e. instructor or Practical assessor; these other roles must be clearly identified against the individual within the relevant MTOE. D3... Knowledge Examiner shall not issue an examination paper or invigilate an examination in a subject area where he/she has acted as an instructor for that course. /0/0 Page 3 of 7 AWNOT-079-AWEG-.0

6 D3.3. PRACTICAL ASSESSORS: D3.3. GENERAL: To be deemed as competent, the practical assessors should be: Fully knowledgeable in order to build a solid judgment regarding the abilities of the assessed trainees. The assessor should have the required knowledge and experience of the tasks to be assessed. He/she should also be able to determine if the trainee accomplishes the tasks in accordance with current regulations, utilizing approved procedures, maintenance practices etc. He/she should additionally be knowledgeable about the rules and specific procedures of MTOE & TPM, governing performance of assessments in a controlled environment. Trained to assessment techniques. The assessor should be fully aware of the aim of the assessment and conduct a practical assessment in such a way that the true abilities of the candidate are demonstrated. These involve technical abilities but also the ability for the candidate to satisfactorily perform the tasks in an actual maintenance environment where basic principles of human factors apply, such as work performed under stressful conditions i.e. time or management s pressure etc. Therefore the assessor should remain neutral at all times, and behave in a manner that will not influence or prejudice the final result of the assessment, for example by providing assistance to a stressed candidate. Proficient, and in particular the assessor should be familiar with the tools or the techniques used by the training organization to assess the practical abilities of trainees e.g. maintenance simulators, mock-ups etc. D3.3. QUALIFICATION: Experience and qualification requirements for basic and type Practical Assessors (PAs) are given in Appendix C & D of this notice. D3.3.3 All Practical Assessors, whether permanently or temporally employed, must demonstrate documented understanding of ANO-0 and ANO-7 regulatory requirements; additionally they should demonstrate a practical working knowledge of the MTOE and associated training procedures. D3.3. Practical Assessors should be listed or referred in Part. of the MTOE. This list should identify the scope of authorization for each Practical Assessor i.e. B, B, type of aircraft etc. D3.3. Practical Assessors may also hold other positions within the training organisations, i.e. Instructor or Knowledge examiner; these other roles must be clearly identified against the individual in MTOE. D3.. ANO-7 REQUIREMENTS: D3.. ANO-7 organisations should ensure that their staff remain conversant with the requirements of ANO-0, ANO-7 and associated MNLs, AMCs, Guidance Materials, Company Procedures and Policies as reflected in MTOE & TPM through update training. D3.. ANO-7 training organisations that employ sub-contracted instructors should maintain a record of the courses instructed and identify the amount of experience gained in each discipline. D3..3 A record of instructor/examiner recency check should be retained by the ANO-7 training organisation, demonstrating at least 3 hours of update training carried out over a month period. /0/0 Page of 7 AWNOT-079-AWEG-.0

7 D3.. ACCEPTANCE OF EXAMINERS AND ASSESSORS D3... Assessment and approval of KEs, PIs and PAs for basic training course shall be performed by the approved training organization in accordance with the dedicated procedure based on the requirements given in this Notice. However, for type trainings, PIs and PAs, shall be approved by Director Airworthiness PCAA. D3... List of all those staff along with their proof of qualification shall be kept in individual s file and included or cross-referred into the MTOE. D3.. CONTINUED QUALIFICATION D3.. The qualification criteria and experience requirements only address the initial approval/acceptance of instructors, examiners and assessors. The training organization must develop and document a procedure to ensure the continued qualification and competence of these staff, and referred it in the MTOE. The recurrent training program shall, as a minimum, comply with sub-para (h) of ANO.7.A.0 and AMC.7.A.0 regarding Personnel requirements. D3.. The continued qualification shall be assessed and confirmed at cycles not exceeding two years. The updating training (syllabus, participants) and the QA assessment shall be documented and made available to PCAA surveyors upon their request. D AUTHORIZATION CERTIFICATE (7-AC): D3.7.. A 7 Authorization Certificate (7-AC) issued by the Quality Manager of MTO, authorizes an individual to act as Knowledge Instructor (KI), Knowledge Examiner (KE), Practical Instructor (PI) and Practical Assessor (PA) under ANO-7 MTO. D3.7.. MINIMUM REQUIREMENTS: D D D D Successfully completed PCAA approved Train the Trainer course (not required for PC holder) Must hold relevant Basic or Type PC as applicable, except as otherwise specified in Para D3.7. for basic module/s. Meet the requirement of updating training as mentioned in sub-para (h) of ANO.7.A.0. Meet the requirements of organizational procedure for any customized training on MTOE/TPM or other relevant area. D All MTOs are advised to fully implement the concept of 7-AC latest by Recommended specimen for 7-AC is given in Appendix F of this notice. D3.7.. Manager Quality of basic training organization can issue 7-AC for individual modules of basic courses (e.g M, MA, M3 etc) once the applicant has met the prescribed requirements for that particular module, as given in appendix A of this notice. D3.7.. Organizations can only issue 7-AC for the elements for which the MTO is approved. D3.7.. Maximum validity of 7-AC is years from the date of issuance or renewal. Performing any role, as mentioned in Para D3.7. above, without or with expired 7-AC will be considered as illegal and may call for suspension/cancellation of training activities. /0/0 Page of 7 AWNOT-079-AWEG-.0

8 D In order to avoid conflict of interest, instructor of ANO-7 organization should not attend the Modular examination in the same organization, where the instructor is employed or is to exercise its privileges, unless specific measures are taken and accepted by PCAA to demonstrate that the integrity of the examination is ensured. D Upon finding, any major non-compliance with mandatory requirements, head of local Airworthiness field office, may suspend/revoke 7-AC at any time. D3.8. PROFICIENCY CERTIFICATE (PC): D3.8.. Proficiency Certificate (PC) issued by PCAA, qualifies an instructor to act as Knowledge instructor (KI) or Knowledge Examiner (KE) for basic or type course/s provided he/she has been authorized by the Quality Manager of MTO by issuing with relevant 7-AC. D3.8.. MINIMUM REQUIREMENTS: D D D D Must have successfully completed PCAA approved Train the Trainer course. For Basic PC, the applicant must meet the requirements for all relevant modules of Basic course as defined in appendix-a of this notice. For relevant modules of basic course, kindly refer Regulation appendix-i of ANO-0. For Type PC, the applicant must meet the relevant requirements as defined in appendix-b of this notice. D For issuance or change in PC, latest issue of PCAA form CAAF-0-AWEG alongwith relevant documents and necessary fee shall be submitted in local Airworthiness field office. D3.8.. An applicant shall submit acceptable documentary evidence to substantiate the experience/ojt claimed. D3.8.. After satisfactory scrutiny of application and compliance with all requirements as given in relevant appendices, local airworthiness field office will forward the application to Airworthiness Directorate with clear recommendations for further action. D3.9. PERSONNEL REQUIREMENTS: D3.9.. With the exception of the Accountable Manager, a PCAA Form shall be completed for each person nominated to hold a position required by ANO.7.0(b). D3.9.. ANO-7 organization shall nominate and submit PCAA form- in favor of nominated personnel in local Airworthiness field office for acceptance of PCAA. D Minimum requirements for their qualification and experience is mentioned in Appendix E of this notice. D3.9.. Upon successful assessment, local Airworthiness field office will recommend the applicant for Provisional (temporary) or Permanent acceptance of HQs Airworthiness Directorate. D3.9.. In case of poor performance or any major non-compliance by nominated personnel, PCAA reserve the right to suspend, limit or revoke Form- at any time. /0/0 Page of 7 AWNOT-079-AWEG-.0

9 E. EVIDENCES (ACRONYMS / RECORDS / REFERENCES): E. ACRONYMS: ANO AIR NAVIGATION ORDER CARs 99 CIVIL AVIATION RULEs 99 EASA EUROPEAN AVIATION SAFETY AGENCY MTO MAINTENANCE TRAINING ORGANIZATION MTOE MAINTENANCE TRAINING ORGANIZATION EXPOSITION PCAA PAKISTAN CIVIL AVIATION AUTHORITY PC PROFICIENCY CERTIFICATE 7-AC 7 AUTHORIZATION CERTIFICATE E. RECORDS: E. Application form for issue/extension of PC (CAAF-0-AWEG) E. Proficiency Certificate (PC) (CAAF-0-AWEG) E3. REFERENCES E3. ANO-7-AWRG E3. ANO-0-AWRG E3.3 CARs 99 IMPLEMENTATION: This Airworthiness Notice shall be implemented with effect from nd February, 0 and repeals / cancels / supersedes airworthiness issued policy letters, policies, Minutes of the meetings, airworthiness notice/s and all other relevant documents issued on this subject. /0/0 Page 7 of 7 AWNOT-079-AWEG-.0

10 APPENDIX A BASIC TRAINING KNOWLEDGE INSTRUCTOR (KI) AND KNOWLEDGE EXAMINER (KE) CRITERIA Module M-, Mathematics M-, Physics M-3, Electrical Fundamentals M-, Electronics Fundamentals M-, Digital Tech & Electronic Instr. System M-, Materials and Hardware OPTIONS Teaching Experience Practical Maintenance Experience Basic/Type PC in any category Engineering degree in any discipline 8 hours ANO/EASA AML in Cat B or B 8 hours Holder of ANO/EASA-7 examination certificate for the modules to be taught (i.e. M or M) 8 hours Basic/Type PC in Cat B/B without limitation & 9 (as applicable) Engineering degree in Avionics/Electrical/ Electronics ANO/EASA AML endorsing the category (i.e. B for B instructor) PCAA type rated AML in Cat B without limitation Holder of ANO/EASA-7 examination certificate for the modules to be taught, at the appropriate level (i.e. B for B instructor) Engineering degree in Avionics/ Electrical/ Electronics + ANO/EASA-7 examination certificate of M with appropriate level (i.e. B for B instructor) PCAA type rated AML in Cat B without limitation,,3,, or & 7 ANO/EASA License endorsing the category (i.e. B for B instructor) Holder of ANO/EASA-7 relevant course completion certificate Basic/Type PC in Cat B or B with Nil limitation Holder of ANO/EASA-7 examination certificate of M with required level (i.e. B for B instructor) Basic/Type PC in Cat B without limitation 0 or Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of M with appropriate level (i.e. B for B instructor) ANO/EASA License endorsing the category (i.e. B for B instructor) 3 hours 3 hours 3 hours 3 hours 3 hours 0 days/module content 0 days on M- 3 hours 3 hours 3 hours hours 3 hours 0 days on M- 0 days on M- 3 hours /0/0 Page of AWNOT-079-AWEG-.0

11 Module M-, continue M-7, Maintenance Practices M-8, Basic Aerodynamics OPTIONS PCAA type rated AML in Cat B without limitation 0 or or Cat B AML with limitation Holder of ANO/EASA-7 relevant course completion certificate Holder of ANO/EASA-7 examination certificate of M with required level (i.e. B for B instructor) Basic/Type PC in Cat B without limitation 0 or Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificates of M7 with appropriate level (Both MCQ+ Essay) ANO/EASA License endorsing the category (i.e. B for B instructor) PCAA type rated AML in Cat B without limitation 0 or or Cat B AML with limitation Holder of ANO/EASA-7 course completion certificate Holder of ANO/EASA-7 examination certificate of M7 with required level (Both MCQ+ Essay) Basic/Type PC in Cat B without limitation 0 or Teaching Experience Practical Maintenance Experience 3 hours 3 hours 7 hours 7 hours 0 days on M- 30 days on M-7 7 hours 7 hours 7 hours 08 hours 30 days on M-7 Engineering degree in Aerospace 8 hours 3 Engineering degree in Mechanical + ANO/EASA-7 examination certificate of M8 3 hours ANO/EASA- License in Cat B or B 3 hours PCAA type rated AML in Cat B without limitation 0 or or Cat B AML with limitation 3 hours Holder of ANO/EASA-7 course completion certificate 3 hours Holder of ANO/EASA-7 examination certificate of M8 hours M-9, Human Factors Holder of PCAA approved Human Factors course certificate +ANO/EASA-7 examination certificates of M9 (Both MCQ + Essay) 8 hours M0, Aviation Legislation Holder of PCAA approved Aviation legislation course certificate +ANO-7 examination certificates of M0 (Both MCQ+ Essay) 08 hours /0/0 Page of AWNOT-079-AWEG-.0

12 Module M-A, Turbine Aeroplane Aerodynamics, Structures and Systems OPTIONS Basic/Type PC in Cat B. without limitation 0 Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of MA ANO/EASA License endorsing the category B. without limitation 0 PCAA type rated AML in Cat B. without limitation 0 Holder of ANO/EASA-7 course completion certificate for Cat B. Teaching Experience hours Practical Maintenance Experience 30 days on M-A hours 08 hours hours Holder of ANO/EASA-7 examination certificate of MA hours 3 days on M-A M-B, Piston Aeroplane Aerodynamics, Structures And Systems M-, Helicopter Aerodynamics, Structures And Systems Basic/type PC in Cat B./. without limitation 0 + ANO/EASA-7 examination certificate of MB (only for B. PC) Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of MB ANO/EASA License endorsing the category B. without limitation 0 PCAA type rated AML in Cat B. without limitation 0 Holder of ANO/EASA-7 course completion certificate for Cat B. Holder of ANO/ EASA-7 examination certificate of MB Basic/type PC in Cat B./.3 without limitation 0 + ANO/EASA-7 examination certificate of M (only for B. PC) Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of M ANO/EASA License endorsing the category B.3/. without limitation 0 PCAA type rated AML in Cat B.3/. without limitation 0 Holder of ANO/EASA-7 course completion certificate for Cat B.3/B. Holder of ANO/ EASA-7 examination certificate of M hours 0 days on MB content 30 days on MB hours 08 hours hours hours hours 3 days on MB 0 days on M 30 days on M hours 08 hours hours hours 3 days on M M-3, Aircraft Aerodynamics, Structures And Systems Basic/type PC in Cat B with limitation Engineering degree in Avionics / Electronics + ANO/EASA-7 examination certificate of M3 ANO/EASA License endorsing the category B hours 30 days on M3 hours /0/0 Page 3 of AWNOT-079-AWEG-.0

13 Module OPTIONS Teaching Experience Practical Maintenance Experience M-3, continue PCAA type rated AML in Cat B with limitation Holder of ANO/EASA-7 course completion certificate for Cat B Holder of ANO/ EASA-7 examination certificate of M3 08 hours hours hours 3 days on M3 Basic/type PC in Cat B. without limitation 0 days on M Engineering degree in Avionics/Aerospace/ Electronics/Mechanical + ANO/EASA-7 examination certificate of M 7 hours 0 days on M M-, Propulsion ANO/EASA License endorsing the category B PCAA type rated AML or PC in Cat B with limitation Holder of ANO/EASA-7 course completion certificate for Cat B Holder of ANO/ EASA-7 examination certificate of M Basic/type PC in Cat B. without limitation 7 hours 3 hours (not req for PC holder) 7 hours 7 hours 0 days on M Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of M hours 0 days on M M-, Gas Turbine Engines ANO/EASA License endorsing the category B. PCAA type rated AML in Cat B. without limitation Holder of ANO/EASA-7 course completion certificate for Cat B. ANO/EASA-7 examination certificate of M hours 08 hours hours hours 30 days on M Basic/type PC in Cat B. without limitation Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of M hours 0 days on M content 0 days on M M-, Piston Engine ANO/EASA License endorsing the category B. PCAA type rated AML in Cat B./. without limitation hours 08 hours Holder of ANO/EASA-7 course completion certificate for Cat B. hours Holder of ANO/ EASA-7 examination certificate of M hours 30 days on M content /0/0 Page of AWNOT-079-AWEG-.0

14 Module M-7, Propeller OPTIONS Basic/type PC in Cat B. without limitation Engineering degree in Aerospace / Mechanical + ANO/EASA-7 examination certificate of M7 ANO/EASA License endorsing the category B. PCAA type rated AML in Cat B. without limitation Holder of ANO/EASA-7 course completion certificate for Cat B. Holder of ANO/ EASA-7 examination certificate of M7 Teaching Experience 08 hours Practical Maintenance Experience 0 days on M7 08 hours 08 hours 08 hours 08 hours days on M7 NOTE:. Within the scope of this notice ONLY, the term a. ANO-7 examination certificate is equivalent to Pre ANO-0 Module examination certificate issued in accordance with AWNOT-078-AWEG by ANO-008-AWRG approved organizations. b. Holder of ANO-7 course completion certificate is equivalent to holder of Basic Aerospace or Basic Avionics, (as the case may be), course completion certificate.. Teaching experience means, the experience gained while teaching in aviation training institutes (independent or under supervision), HEC recognized universities, ANO- required courses or teaching in defense forces aviation training institutes. 3. *All ANO-0 license holders, which are issued on the basis of conversion through Protected rights and have limitations for the /modules/subjects under question, are not eligible to avail this criteria. Quality Managers of training organizations are strictly advised to pay special attention while dealing such cases before issuance of 7-AC. For any further guidance and clarification, please contact local Airworthiness field office.. Teaching experience as mentioned in appendix A above, are concurrent in nature, it means minimum teaching hours are required to teach all relevant modules of Basic course.. Practical Maintenance Experience (PME) must be maintained and submitted in the form of detailed experience logbook pages while working in PCAA approved MRO or Defense forces maintenance organization, covering the wide variety of maintenance tasks, relevant with the scope of module under question.. Quality Managers of MTO shall refer/define a procedure for issuance, renewal and extension of 7-AC in their MTOE. 7. All those Teaching Authorization Certificates (TACs), which were previously issued in accordance with previous revision of this notice shall be converted into 7-AC by /0/0 Page of AWNOT-079-AWEG-.0

15 APPENDIX B TYPE TRAINING KNOWLEDGE INSTRUCTOR (KI) AND KNOWLEDGE EXAMINER (KE) CRITERIA Required Type PC category PC Category (with limitations) REQUIREMENTS Conduction of relevant type course (Theoretical Element only) under 00% supervision of qualified instructor Programmed* OJT B. Basic B. PC Required 30 Days B. Basic B. PC Required Days B.3 Basic B.3 PC Required 30 Days B. Basic B. PC Required Days B Basic B PC Required 30 Days C Basic B (Subcategory) OR B PC Required NOTE:. Attending and successful completion of relevant category type course (Both Theoretical and Practical Element) is mandatory for all instructors before conducting relevant type training class under supervision as mentioned above.. Candidate must have relevant basic PC with limitations prior to conduction of type training class under supervision as required in above appendix. 3. After meeting the above requirement, the applicant can apply to local airworthiness field office on the latest issue of PCAA form CAAF-0-AWEG for extension of their PC.. Issuance or Extension of PC just form the basis of qualification, however, instructor can only perform the role of KI or KE once they are authorized by the QM of MTO by issuing with relevant 7-AC.. Programmed OJT* booklet must be approved by the Training Manager of ANO-7 organization before its conduction in maintenance organization.. OJT booklet must cover the wide variety of type maintenance tasks, as mentioned in AMC Appendix-II of ANO-0, for all relevant ATA chapters for aircraft type under question. /0/0 Page of AWNOT-079-AWEG-.0

16 APPENDIX C BASIC TRAINING PRACTICAL INSTRUCTOR (PI) AND PRACTICAL ASSESSOR (PA) CRITERIA OPTIONS Practical Experience Special training session (STS) 0 Hold type rated AML relevant to the subject/module being taught. 3 Years Required Hold a supervisory position, as B or B maintenance personnel (as the case may be), within a PCAA approved MRO. Hold a supervisory position, as B or B maintenance personnel (as the case may be), within a non-civilian aviation maintenance setup. Holder of ANO/EASA-7 relevant basic course completion certificate KI having valid 7-AC relevant to the subject/module being taught. 7 Years Required 0 Years Required year Required For workshop PI/PA, atleast for the relevant duration of workshop training for module being taught For OJT PI/PA, 0 days within the last months on the subject module being taught Required Note:. Completion of Train the Trainer course is compulsory for all basic Practical Instructor (PI) and Practical Assessor (PA).. Special Training Session (STS) is a documented training session on ANO-0, ANO-, ANO- 7, MTOs procedures and on the organization s MTOE. Record of such trainings shall be maintained in individual s authorizations file. 3. Duration of STS shall not be less than days i.e training hours /0/0 Page of AWNOT-079-AWEG-.0

17 TYPE TRAINING APPENDIX D PRACTICAL INSTRUCTOR (PI) AND PRACTICAL ASSESSOR (PA) CRITERIA OPTIONS Practical Experience Special training session (STS) 0 Having valid certification authorization on the type of Aircraft being taught. 3 Years Required 0 Completed subject type course (TH & PR both) + Hold a supervisory position as B or B maintenance personnel (as the case may be), within a PCAA approved MRO. 7 years in total including months within the last months on the category of the subject aircraft being taught Required 03 KI having valid 7-AC relevant to the type of Aircraft being taught 30 days within the last months on the category of the subject aircraft being taught Required Note:. Completion of Train the Trainer course is compulsory for all type Practical Instructor (PI) and Practical Assessor (PA).. Special Training Session (STS) is a documented training session on ANO-0, ANO-, ANO- 7, MTOs procedures and on the organization s MTOE. Record of such trainings shall be maintained in individual s authorizations file. 3. Duration of STS shall not be less than days i.e training hours /0/0 Page of AWNOT-079-AWEG-.0

18 APPENDIX E QUALIFICATION REQUIREMENTS FOR NOMINATED PERSONNEL ON PCAA FORM- Post Qualification Teaching Exp Assessment Training Manager (TM) Examination Manager (EM) Quality Manager (QM) Graduate + Basic PC with limitation or type PCs with limitations Graduate + Basic PC with limitation or type PC with limitations Graduate + Lead Auditor Course Minimum Yrs Minimum 3 Yrs Minimum Yr Assessment board duly approved by Director Airworthiness shall carryout the assessment of nominated personnel on Pak Aviation legislation, organization MTOE and TPM. Deputy Training Manager (DTM) (In-charge) of approved station Graduate preferably with Basic or type PC with limitations Minimum Yr Local field office shall carryout the assessment of nominated personnel on Pak Aviation legislation, organization MTOE and TPM Chief Instructor (if any) Requirements are to be mentioned in MTOE /0/0 Page of AWNOT-079-AWEG-.0

19 APPENDIX F MTO s Logo NAME OF TRAINING ORGANIZATION 7 AUTHORIZATION CERTIFICATE (7-AC) PERSONAL DETAILS: Name: Date of Employment: Date of Birth: Place of Birth: PC No. Revision: Dated: 7-AC No. Revision: Dated: 7-AC date of expiry: Recent Photograph in uniform with White Background RECORD OF UPDATING TRAINING: Topic Duration Topic Duration Current technology: Practical skills & training techniques Human factors: Legislation Other (please specify): CERTIFICATE: This is certified that Mr./Ms. has gone through updating training of minimum 3 hours within last months and this authorization has been issued after confirming that the applicant has fulfilled all the laid down requirements in latest issue of PCAA ANO.7.AWRG (ANO.7.A.0(h)) and AWNOT-079-AWEG. Specimen of holder s signature and stamp Quality unit stamp Issued by Signature: Name: Designation: QUALITY MANAGER Date: SCOPE OF BASIC AUTHORIZATION Sr. No. MODULE Cat KI KE PI PA PI PA (WSP) (WSP) (OJT) (OJT) Quality Unit Official Signature with Stamp /0/0 Page of AWNOT-079-AWEG-.0

20 SCOPE OF TYPE AUTHORIZATION Sr. No. TITLE Cat KI KE PI PA LIMITATION CODES Quality Unit Official Signature with Stamp SCOPE OF MISCELLANEOUS COURSE AUTHORIZATION Sr. No. TITLE Cat KI KE LIMITATION CODES Quality Unit Official Signature with Stamp /0/0 Page of AWNOT-079-AWEG-.0