PROGRAM LATIHAN WISDEC

Transcription

1 Wood Industry Skills Development Centre (WISDEC) PROGRAM LATIHAN WISDEC WISDEC Training Programme 2011 MTIB MS ISO 9001 : 2008 REG. NO. AR3307

2

3 KANDUNGAN Kandungan (Contents) Muka surat (Page) A. PUSAT PEMBANGUNAN KEMAHIRAN INDUSTRI KAYU (WISDEC) 4 Pendahuluan 5 Visi dan Misi 5 WOOD INDUSTRY SKILLS DEVELOPMENT CENTRE (WISDEC) 6 Introduction 6 Vision and Mission 6 B. MAKLUMAT PROGRAM LATIHAN 7 Program Latihan 8 Kaedah Latihan 9 Kemudahan Latihan 9 Tenaga Pengajar 9 Sijil Kursus 9 Insentif Latihan 9 Kemudahan Penginapan dan Pengangkutan 10 Insuran 10 Pendaftaran / Bayaran / Yuran 10 Permohonan 10 Maklumat Lanjut 10 INFORMATION ON TRAINING PROGRAMME 11 Training Programme 11 Training Methodology 12 Training Facilities 12 Speakers / Trainers / Facilitators 12 Award of Certificate 12 Training Incentives 12 Accommodation and Transportation 12 Insurance 13 Registration / Payment / Fees 13 Application 13 Further Information 13 C. PELAN LOKASI WISDEC 14 WISDEC LOCATION MAP 1

4 D. PROGRAM LATIHAN DI WISDEC SELANGOR 17 TRAINING PROGRAMME AT WISDEC SELANGOR Teknologi Automasi Untuk Pengeluaran Perabot 18 Automation Technology For Furniture Production Pembuatan dan Penyelenggaraan Mata Pisau 19 Profile Knife Grinding And Maintenance Konsep Lean Manufacturing Dalam Industri Perabot Berasaskan Kayu 20 Lean Manufacturing Concept In Wood Based Furniture Industry Keselamatan Dan Kesihatan Dalam Pembuatan Perabot Berasaskan Kayu 21 Safety And Health In Wood Based Furniture Production Rekabentuk Dalaman (Perabot Ruang Tamu) 22 Interior Design (Living Room Furniture) Kemasiapan Teknologi Hijau Berasakan Air Untuk Tanggam Dan Lantai 23 Green Finishing Waterborne Technology For Joinery And Flooring Kemasiapan Kreatif Dalam Industri Perabot Dan Produk Berasaskan Kayu 24 Creative Finishing In Furniture Industry And Wood Based Product Pemeringkatan Kayu Getah 25 Rubberwood Grading Pengkosan Dan Belanjawan Produk 26 Product Costing And Budgeting Aplikasi Inventor 2011 Dalam Transformasi Rekabentuk Perabot 27 Inventor 2011 Application In Furniture Design Transformation E. PROGRAM LATIHAN DI WISDEC SABAH 28 TRAINING PROGRAMME AT WISDEC SABAH Aplikasi Perisian AutoCAD 2011 (2D) 29 Autocad 2011 Software Application (2D) Aplikasi Perisian AutoCAD 2011 Lanjutan (3D) 30 Autocad 2011 Software Application Advanced (3D) Teknologi Dan Operasi Mesin CNC Router 31 Technology And Operation Of CNC Router Machine Aplikasi Inventor 2011 Dalam Transformasi Rekabentuk Perabot 32 Inventor 2011 Application In Furniture Design Transformation Rekabentuk Dalaman (Perabot Ruang Tamu) 33 Interior Design (Living Room Furniture) Pembuatan Jigs Dan Fixtures 34 Jigs And Fixtures Making 2

5 Pemeringkatan Kayu Getah 35 Rubberwood Grading Kemasiapan Kreatif Dalam Industri Perabot Dan Produk Berasaskan Kayu 36 Creative Finishing In Furniture Industry And Wood Based Product Pengkosan Dan Belanjawan Produk 37 Product Costing & Budgetting Pengurusan Sistem Keselamatan Dan Kesihatan (Osh-Ms) Dalam Operasi Pengeluaran Perabot 38 Safety And Health Management System (Osh-Ms) In Furniture Production Operation F. PROGRAM LATIHAN BELIA 39 YOUTH TRAINING PROGRAMMES Sijil Rekabentuk Dan Pembuatan Perabot 40 Certificate In Furniture Design And Making (FDM) Sijil Pemprosesan Kayu Dan Teknologi Kemasiapan 42 Certificate In Timber Processing And Finishing Technology (TPF) Skim Perantisan Industri Berasaskan Kayu (Perabot) 44 Wood-Based Industry Apprenticeship Scheme (Furniture) G. AKUAN 47 TESTIMONIAL H. PAKATAN STRATEGIK 49 STRATEGIC ALLIANCES I. PEMUDAH CARA 51 FACILITATORS J. BORANG PERMOHONAN 54 APPLICATION FORM 3

6 A. PUSAT PEMBANGUNAN KEMAHIRAN INDUSTRI KAYU WOOD INDUSTRY SKILLS DEVELOPMENT CENTRE

7 PUSAT PEMBANGUNAN KEMAHIRAN INDUSTRI KAYU PENDAHULUAN Lembaga Perindustrian Kayu Malaysia (MTIB) adalah sebuah Badan Berkanun Persekutuan yang bertanggungjawab terhadap pembangunan industri perkayuan negara. Dalam melaksanakan tanggungjawab tersebut, MTIB telah mengambilkira aspek pembangunan sumber manusia sebagai salah satu elemen yang amat kritikal yang perlu diberi penekanan, supaya industri perkayuan dapat mempertingkatkan produktiviti, kecekapan, kualiti serta mempunyai produk yang bernilai tambah. Oleh itu, bagi melaksanakan peranan tersebut dengan lebih berkesan, maka MTIB telah menubuhkan Pusat Pembangunan Kemahiran Industri Kayu atau Wood Industry Skills Development Centre (WISDEC) di Banting, Selangor dalam tahun 1995 dan satu lagi di Kota Kinabalu, Sabah dalam tahun Penubuhan WISDEC adalah selaras dengan matlamat negara iaitu untuk mempercepatkan pemindahan teknologi dan tahap pemprosesan bagi produk kayu bernilai tambah seperti perabot, tanggam dan kayu kumai. Objektif utama penubuhan WISDEC adalah: Memberi latihan kemahiran secara industry oriented untuk industri perkayuan; Membantu meningkatkan tenaga kerja mahir dan berpengetahuan; Memberi khidmat nasihat teknikal dalam pengeluaran perabot; Menggalakkan pemindahan teknologi melalui latihan teknikal bagi memodenkan industri pemprosesan kayu; dan Membantu dalam pembangunan produk dan rekabentuk. VISI DAN MISI VISI WISDEC menjadi sebuah institusi unggul untuk latihan dan khidmat nasihat teknikal dalam pemprosesan hiliran kayu. MISI Mempertingkatkan pembangunan sumber manusia industri kayu, khasnya sektor pemprosesan hiliran kayu untuk meningkatkan produktiviti dan daya saing industri berkenaan. 5

8 WOOD INDUSTRY SKILLS DEVELOPMENT CENTRE INTRODUCTION The Malaysian Timber Industry Board (MTIB) is a government agency, which is responsible for the development of timber industry. In the implementation of its functions, MTIB has taken into account the aspect of human resource development as one of the critical elements which needs to be stressed in order to enhance productivity, efficiency, quality and value-added products of the wood-based industry. As an instrument to implement this role, MTIB established the Wood Industry Skills Development Centre (WISDEC) in Banting, Selangor in 1995 and in Kota Kinabalu, Sabah in The establishment of WISDEC is in line with the national aspiration to accelerate transfer of technology and processing level of valueadded timber products such as furniture, joinery and moulding. The main objectives of WISDEC are: To provide industry-oriented skills training for the wood-based industry; To produce adequate skilled manpower for the wood-based industry; To provide technical advisory services in furniture manufacturing; To expedite technology transfer through technical training; and To assist in product development and design. VISION AND MISSION VISION To be the lead institution in training and technical advisory services on downstream timber processing. MISSION To enhance the development of human resources in the timber industry, with special emphasis on downstream processing, to increase productivity and competitiveness. 6

9 B. MAKLUMAT PROGRAM LATIHAN InFORMATION ON TRAINING PROGRAMME

10 MAKLUMAT PROGRAM LATIHAN PROGRAM LATIHAN Program latihan yang ditawarkan oleh WISDEC terdiri dari lima kategori iaitu: i) Program Latihan Jangka Pendek Kursus Berjadual - Kursus-kursus yang dirancang secara tahunan untuk memenuhi keperluan pihak industri kayu khususnya di peringkat operator pengeluaran, juruteknik, penyelia dan pengurusan. ii) Program Latihan Suaikhas Kursus Atas Permintaan / Kursus di tempat - Kursus ini dilaksanakan atas permintaan pihak-pihak tertentu di dalam dan luar negara sama ada dari pihak industri mahupun organisasi tertentu. Kursus-kursus atas permintaan yang kerap dianjurkan oleh WISDEC adalah seperti berikut: a) Pemeringkatan Kayu d) Pemesinan Kayu b) Teknologi Kayu e) Pembuatan Perabot c) Anatomi Dan Pengecaman Kayu iii) Program Latihan Belia (modul latihan dibangunkan oleh MTIB) Program Pembangunan Pengurusan Profesional (PMD) - Kursus ini merupakan program latihan berstruktur yang akan menyediakan peluang kerjaya yang cerah kepada eksekutif muda dan graduan yang berminat untuk membina kerjaya dalam industri berasaskan kayu. Sijil Pemprosesan Kayu Dan Teknologi Kemasiapan (TPF) - Kursus ini merupakan program latihan berstruktur yang akan menyediakan peluang kerjaya yang cerah kepada pelajar lepasan sekolah / pekerja yang berminat untuk membina kerjaya dalam industri berasaskan kayu. Sijil Rekabentuk dan Pembuatan Perabot (FDM) - Kursus ini memfokuskan inovasi dan rekabentuk tanpa batasan dengan menggunakan bahan-bahan, identiti dan kemahiran pertukangan perabot. Kursus ini menggalakkan pelatih menggunakan pendekatan profesional untuk merekabentuk dan menghasilkan perabot di samping memelihara gaya-gaya rekabentuk perabot yang berbeza. iv) Program Latihan Berasaskan Keterampilan Skim Perantisan Industri Berasaskan Kayu (Perabot) - Skim ini merupakan program latihan berstruktur yang akan menyediakan peluang kerjaya yang cerah kepada pelajar lepasan sekolah / pekerja yang berminat untuk membina kerjaya dalam industri berasaskan kayu. Kursus Pengeringan Kayu - Kursus ini dianjurkan bersama oleh MTIB, Forest Research Institute Malaysia (FRIM) dan Universiti Putra Malaysia (UPM). Peserta yang berjaya akan dianugerahkan Sijil Kelayakan / Kompetensi. v) Khidmat Perundingan - WISDEC juga menawarkan khidmat perundingan di dalam dan luar negara di dalam Pemeringkatan Kayu, Pemprosesan Kayu, Pengeluaran Perabot, Pengeringan Tanur dan lain-lain lagi. Sejajar dengan menyampaikan salah satu cabaran memastikan penggunaan kayu berkekalan, WISDEC telah membuktikan kualiti latihan yang tinggi, khidmat perundingannya diperluaskan untuk menbantu pembangunan kerjaya dalam industri kayu. 8

11 KAEDAH LATIHAN Kaedah latihan menekankan latihan secara hands-on yang mana peserta akan menggunakan 70% masa untuk menjalani kerja-kerja praktikal. Ini dilengkapkan lagi dengan latihan secara formal di dalam kelas. Lawatan juga diaturkan untuk memberi lebih pendedahan industri. KEMUDAHAN LATIHAN WISDEC mempunyai kemudahan latihan yang lengkap bagi menjalankan program latihan. WISDEC dilengkapi dengan bilik latihan, bilik latihan komputer, bengkel kerja kayu, mesin-mesin kerja kayu, pusat sumber dan kelengkapan latihan lain. TENAGA PENGAJAR Selain daripada pegawai-pegawai WISDEC, tenaga pengajar luar juga adalah terdiri daripada mereka yang berpengalaman dalam industri perkayuan, pusat penyelidikan dan institusi pengajian tinggi. SIJIL KURSUS MTIB mengeluarkan Sijil Kehadiran (Certificate of Attendance) kursus kepada setiap peserta yang mengikuti kursus dengan sepenuhnya. Untuk Kursus Pengeringan Kayu, Sijil Kelayakan (Certificate of Competency) akan dianugerahkan kepada peserta-peserta yang lulus dalam peperiksaan dengan jayanya. Bagi Skim Perantisan Industri Berasaskan Kayu (Perabot), peserta akan dianugerahkan: i) Sijil Kemahiran Malaysia (Tahap 1 dan 2) oleh Jabatan Pembangunan Kemahiran (JPK). ii) Sijil Perantisan oleh Pembangunan Sumber Manusia Berhad (PSMB) dan MTIB. INSENTIF LATIHAN MTIB merupakan di antara agensi yang telah disenaraikan sebagai Institusi Latihan Yang Diluluskan di bawah Kaedah-kaedah Cukai Pendapatan (Potongan Bagi Latihan Yang Diluluskan) Syarikat-syarikat yang menghantar pekerja mereka untuk mengikuti kursuskursus yang dianjurkan oleh MTIB, boleh menikmati potongan cukai yang sewajarnya di bawah kaedah-kaedah ini. Industri perkayuan juga boleh menikmati insentif latihan melalui skim-skim yang berkaitan dari PSMB. Skim-skim tersebut adalah: i) Skim Bantuan Latihan (SBL) dengan syarat segala keperluan PSMB dipenuhi. ii) Skim PROLUS - Beberapa kursus MTIB telah mendapat taraf Approved Training Programme (ATP). iii) Diskaun sebanyak 10 peratus untuk yuran kursus, akan diberi kepada syarikat / individu yang memenuhi mana-mana syarat keperluan di bawah: a) Mendaftar dan membuat bayaran yuran kursus sekurang-kurangnya satu bulan sebelum kursus yang dipohon dilangsungkan; atau b) Menghantar dua (2) atau lebih peserta dalam kursus yang dipohon pada jangkamasa yang sama; atau c) Menyertai sebarang kursus bagi kali ketiga (3) atau lebih dalam satu tahun kalendar kursus. 9

12 KEMUDAHAN PENGINAPAN DAN PENGANGKUTAN Untuk keselesaan peserta kursus, WISDEC menyediakan rumah penginapan yang dilengkapi dengan kemudahan asas seperti tv, peti sejuk dan lain-lain. Bilik tidur adalah jenis twin sharing dengan kadar bayaran seperti di bawah. Kemudahan pengangkutan untuk berulang alik dari tempat penginapan ke WISDEC juga disediakan. Penginapan di hotel juga boleh diuruskan oleh pihak WISDEC dengan kadar bayaran yang ditanggung oleh peserta sendiri. Kadar bayaran untuk penginapan peserta kursus Tempat WISDEC Selangor (WISDEC LODGE) WISDEC Sabah (VILLA WISDEC) Kadar bayaran RM / peserta / malam RM / peserta / malam INSURAN Peserta akan dilindungi oleh polisi insuran semasa latihan. 10 PENDAFTARAN / BAYARAN / YURAN Bayaran hendaklah dibuat dalam bentuk kiriman wang / wang pos / bank draf / cek berpalang, di atas nama Lembaga Perindustrian Kayu Malaysia. Segala pembayaran hendaklah dibuat selewat-lewatnya satu minggu sebelum tarikh kursus dijalankan. WISDEC berhak untuk tidak memulangkan bayaran yuran kursus sekiranya pemohon / peserta tidak hadir tanpa alasan yang munasabah. WISDEC berhak meminda, membatalkan dan mengubah program, tenaga pengajar, tarikh serta tempat latihan. PERMOHONAN KURSUS Permohonan untuk mengikuti kursus boleh dibuat melalui borang permohonan yang disertakan di bahagian J. Maklumat mengenai kursus juga boleh diperolehi melalui laman web MTIB ( MAKLUMAT LANJUT Sebarang maklumat lanjut berhubung dengan penganjuran kursus boleh diperolehi dengan menghubungi: i) WISDEC Selangor Lot 167, Jalan 3, Kompleks Perabot Olak Lempit, Banting, Selangor Tel : , Faks : E-mel : wisdec@mtib.gov.my ii) WISDEC Sabah Lot 4, Fasa 1, Jalan Timur 6, Taman Perindustrian Kota Kinabalu, Peti Surat 177, Pos Mini Indah Permai, Kota Kinabalu, Sabah Tel : Faks : / E-mel : mtibsabah@mtib.gov.my

13 Information on TRAINING PROGRAMME TRAINING PROGRAMME The training programme offered by WISDEC is divided into five categories: i) Short Term Training Programme Scheduled Courses - These courses are planned annually to suit the needs and requirements of the wood-based industry especially at operator, technician as well as the supervisory and managerial levels. ii) Customised Training Programme Customised Courses / In-House Training - These courses which are conducted locally and internationally according to the requirements and needs of companies or organization upon request. Customised courses, which are commonly organised by WISDEC, are: a) Timber Grading d) Wood Machining b) Wood Technology e) Furniture Making c) Wood Anatomy & Timber Identification iii) Youth Training Programme (training module developed by MTIB) Professional Management Development Programme (PMD) - The scheme is a structured training programme which provides an excellent career opportunity to young executives and fresh gradutes, who are interested to pursue a career in wood-based industry. Certificate in Timber Processing and Finishing Technology (TPF) - A structured training programme which provide an excellent career opportunity to school leavers / workers, who are interested to pursue a career in woodbased industry. Certificate in Furniture Design Making (FDM) - The course focuses on innovating and pushing the boundaries of design and use of materials, identity and craftsmanship are intrinsic to the values of this course. The course also encourages students to develop a professional approach to design and manufacture while nurturing their own distinctive styles of furniture. iv) Competency-Based Training Programme (training module jointly developed by MTIB and other organisations) Wood-based Industry Apprenticeship Scheme (Furniture) - A structured training programme which provide an excellent career opportunity to school leavers / workers, who are interested to pursue a career in woodbased industry. Timber Drying Course - This course is jointly organized by MTIB, Forest Research Institute Malaysia (FRIM) and Universiti Putra Malaysia (UPM). Participants who successfully complete the training as well as pass the examination will be awarded a Certificate of Competency. v) Consultancy Services WISDEC not only offered training programmes but its services is extended to consultancy work locally and internationally in several areas such as Timber Grading, Wood Processing, Furniture Production and Kiln Drying etc. In tandem with addressing one of the challenges of ensuring sustainable timber utilization, WISDEC has been providing high quality training, extension and consultancy services to facilitate capacity development in industry particularly for the promotion of value-added products derived from downstream processing. 11

14 TRAINING METHODOLOGY Training methodology emphasises on hands-on training where the participants spend 70% of their time doing their practical work. This approach is complemented by formal classroom training. Visits are also arranged for greater exposure to industry. TRAINING FACILITIES WISDEC has training facilities to execute its training programme. It is equipped with training rooms, computer lab, wood working workshop, wood working machines, resource centre as well as other training facilities. SPEAKERS / TRAINERS / FACILITATORS Beside WISDEC officers, external speakers / trainers / facilitators are also engaged to complement and provide practical experiences. AWARD OF CERTIFICATE MTIB will issue a Certificate of Attendance to its participants who successfully complete a course. A Certificate of Competency will be awarded to the participants who successfully pass their exam for the Timber Drying Course. Participants who successfully complete the Apprenticeship Scheme shall receive the following certificates: 12 i) Malaysian Skills Certificate (SKM Level 1 & 2) from Department of Skills Development. ii) Certificate from Pembangunan Sumber Manusia Berhad (PSMB) and MTIB. TRAINING INCENTIVES MTIB is listed as an Approved Training Provider under Tax Regulation (Deduction for approved training) Companies which send their employee for training at MTIB will enjoy a tax deduction under this regulation. Training incentive is also available under PSMB schemes. These schemes are: i) Training assistance scheme (SBL). ii) PROLUS scheme - Several of MTIB courses are recognised under the (Approved Training Programme). iii) 10% discount of course fee will be given for those who fulfill the following conditions:- a) Payment is made at least one month before the commencement of the course; or b) Two (2) or more participants from a company attending the same course and duration; or c) Participates in any course for the third (3) time or more in a calendar year. ACCOMMODATION AND TRANSPORTATION WISDEC provides accommodation facilities which are equipped with tv, sofa, fridge and etc. A twin-sharing bedroom with a rate as tabulated in the table. Transportation for return trip from the hostel and WISDEC will also be provided. Accommodation in nearest hotel can also be arranged by WISDEC with a separate payment by the participant/s.

15 Accomodation rate Place WISDEC Selangor (WISDEC LODGE) WISDEC Sabah (VILLA WISDEC) Rate RM 20 / participant / night RM 30 / participant / night INSURANCE Participants are covered with insurance policy during the training. REGISTRATION / PAYMENT / FEES Payment should be made to Lembaga Perindustrian Kayu Malaysia by money order / postal order / bank draft / crossed cheque. Payment should be made at least one week before the commencement of the course. No refund will be made if a participant is absent without reasonable cause. WISDEC has the right to make any amendments, cancel and change the programme, speaker, date or training venue. APPLICATION Applications for the training programme could be made through application form as attached in Appendix J. Please visit us at gov.my for further information on the training programme. FURTHER INFORMATION Any enquiries, please contact us at: i) WISDEC Selangor Lot 167, Jalan 3, Kompleks Perabot Olak Lempit Banting, Selangor Tel : , Fax : wisdec@mtib.gov.my ii) WISDEC Sabah Lot 4, Fasa 1, Jalan Timur 6, Taman Perindustrian Kota Kinabalu Peti Surat 177, Pos Mini Indah Permai Kota Kinabalu, Sabah Tel : Fax : / mtibsabah@mtib.gov.my 13

16 C. PELAN LOKASI WISDEC WISDEC LOCATION MAP

17 WISDEC SELANGOR PELAN LOKASI (Location Map) WISDEC Lot 167, Jalan 3, Kompleks Perabot Olak Lempit, Banting, Selangor Darul Ehsan. Tel: Fax:

18 WISDEC SABAH 16

19 D. PROGRAM LATIHAN DI WISDEC SELANGOR TRAINING PROGRAMME AT WISDEC SELANGOR

20 KOD: WT 416 Teknologi Automasi Untuk Pengeluaran Perabot AUTOMATION TECHNOLOGY FOR FURNITURE PRODUCTION 1. OBJEKTIF i. Untuk memberi pendedahan kepada pengusaha pengeluar perabot tentang kebaikan penggunaan sistem automasi dari segi penjimatan kos dan tenaga kerja dalam sektor pengeluaran perabot 1. OBJECTIVE i. To provide exposure about the advantage of automation system application for course reduction and labour in furniture production sector KANDUNGAN KURSUS i. Pengenalan kepada teknologi automasi ii. Teknologi automasi dan peranannya iii. Automasi dalam industri pengeluaran perabot Rough mill Smooth mill Finishing iv. Faedah dan kebaikan penggunaan sistem automasi dalam industri pengeluaran perabot Ekonomi Buruh/ Tenaga kerja Produktiviti dan kualiti konsisten Meningkatkan daya saing v. Perancangan dan pemilihan sistem automasi 3. METODOLOGI Syarahan / Lawatan industri 4. KUMPULAN SASARAN Pengurusan kilang dan eksekutif 5. TARIKH 1 2 Mac Jangkamasa 2 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM350 / peserta 9. PENYELARAS En Asfairul Abdul Majid 2. COURSE CONTENTS i. Introduction to automation technology ii. Automation technology and its function iii.automation in furniture production industry Rough mill Smooth mill Finishing iv. Advantage and the benefits of automation system application in furniture production industry Economy Labor Productivity and quality consistency Increasing competency v. Automation system planning and selection 3. METHODOLOGY Lectures / Industry visit 4. TARGET GROUP Factory management and executive 5. DATE 1 2 March DURATION 2 Days 7. VENUE WISDEC Selangor 8. FEE RM350 / participant 9. COORDINATOR Mr Asfairul Abdul Majid

21 Pembuatan dan Penyelenggaraan Mata Pisau PROFILE KNIFE GRINDING AND MAINTENANCE 1. OBJEKTIF i. Meningkatkan pengetahuan mengenai kaedah dan teknik pembuatan mata pisau kepada peserta ii. Meningkatkan kemahiran peserta di dalam teknik pembuatan dan selenggaraan mata pisau 1. OBJECTIVES i. To enhance the knowledge on method and technique in saw grinding to participant ii. To enhance the skills on saw grinding and maintenance KOD: WT KANDUNGAN KURSUS Pengenalan kepada jenis-jenis mata pisau Ciri-ciri mata pisau Kaedah pemilihan dan penggunaan mata pisau berdasarkan keluaran produk Kaedah pembuatan mata pisau Kaedah penyelenggaraan mata pisau Latihan amali 2. COURSE CONTENTS Introduction to types of saw Saw features Selecting and usage of saw according to production Saw grinding method Saw maintenance method Hands on training 3. METODOLOGI Syarahan / Amali 3. METHODOLOGY Lectures / Hands on training 4. KUMPULAN SASARAN Operator penyelenggaraan 5. TARIKH Mac Jangkamasa 3 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM525 / peserta 9. PENYELARAS En Asfairul Abdul Majid 4. TARGET GROUP Maintenance operator 5. DATE March DURATION 3 Days 7. VENUE WISDEC Selangor 8. FEE RM525 / participant 9. COORDINATOR Mr Asfairul Abdul Majid 19

22 KOD: WT 417 Konsep Lean Manufacturing dalam industri perabot BERASASKAN kayu LEAN MANUFACTURING CONCEPT IN WOOD BASED FURNITURE INDUSTRY 1. OBJEKTIF i. Untuk memberi pengetahuan dalam melaksanakan Lean Manufacturing dalam sistem industri perabot di Malaysia 1. OBJECTIVE i. To enhance knowledge on lean manufacturing application in Malaysian furniture industry system 2. KANDUNGAN KURSUS Apa itu Lean Manufacturing? Bagaimana untuk melaksanakan Lean Manufacturing? Tanda aras bagi Lean Manufacturing Pentingnya melaksanakan Lean manufacturing dengan ahli pasukan yang sesuai 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Eksekutif dan pengurusan kilang 2. COURSE CONTENTS What is Lean Manufacturing? How to implement Lean manufacturing? Benchmark for Lean manufacturing Important of Lean manufacturing implementation with appropriate team 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Executive and Factory management 5. TARIKH 5 6 April Jangkamasa 2 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM350 / peserta 9. PENYELARAS Pn Rohaiza Abd kadir Zailani 5. DATE 5 6 April DURATION 2 Days 7. VENUE WISDEC Selangor 8. FEE RM350 / participant 9. COORDINATOR Ms Rohaiza Abd kadir Zailani 20

23 KESELAMATAN DAN KESIHATAN DALAM PEMBUATAN PERABOT BERASASKAN KAYU SAFETY AND HEALTH IN WOOD BASED FURNITURE PRODUCTION 1. OBJEKTIF i. Untuk mempertingkatkan kefahaman mengenai perundangan, pengurusan dan perlaksanaan keselamatan dan kesihatan dalam pembuatan perabot berasaskan kayu 1. OBJECTIVE i. To enhance understanding regarding legislation, management and practices of safety and health in wood based furniture production KOD: WM KANDUNGAN KURSUS Pengenalan Kepada OSHA 1994 Garis panduan berkaitan keselamatan dan kesihatan dalam industri perkayuan Senario industri pembuatan perabot berasaskan kayu dari perspektif keselamatan dan kesihatan Hazard dalam industri pembuatan perabot Keselamatan mesin Pencegahan kemalangan Pengurusan risiko Analisis keselamatan kerja (JSA) Kajian kes 2. COURSE CONTENTS Introduction to OSHA 1994 Guideline of safety and health in the wood-based industry Scenario in wood-based furniture production from safety and health perspective Hazards in the furniture manufacturing industry Machining safety Accident prevention Risk management Job Security Analysis (JSA) Case study 3. METODOLOGI Syarahan / Lawatan industri 4. KUMPULAN SASARAN Penyelia dan kumpulan pengurusan 5. TARIKH April Jangkamasa 2 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM350 / peserta 9. PENYELARAS En Mohd Fu ad Ishak 3. METHODOLOGY Lectures / Industry visit 4. TARGET GROUP Supervisors and management 5. DATE April DURATION 2 Days 7. VENUE WISDEC Selangor 8. FEE RM350 / participant 9. COORDINATOR Mr Mohd Fu ad Ishak 21

24 KOD: WD 411 REKABENTUK DALAMAN (PERABOT RUANG TAMU) INTERIOR DESIGN (LIVING ROOM FURNITURE) 1. OBJEKTIF i. Memberi status terkini berkenaan perkembangan rekabentuk dalaman (perabot ruang tamu) ii. Memahirkan peserta dalam merekabentuk perabot ruang tamu seiring dengan kehendak semasa 1. OBJECTIVES i. To provides the latest status on the Interior designing development (living room furniture) ii. To enhance participant skills in living room designing in line with the current needs 2. KANDUNGAN KURSUS Pengenalan kepada reka bentuk Bahan dalam reka bentuk dalaman ( i ) Bahan dalam reka bentuk dalaman ( ii) Interior design (soft furnishing) ( i ) Interior design (soft furnishing) ( ii ) Drawing in interior design (pleminary stage design) Drawing in interior design (presentation drawing) Drawing in interior design (working drawing) Drawing in interior design (practical) Furniture design ( i ) Furniture design ( ii ) 2. COURSE CONTENTS Introduction to design Interior design materials (i) Interior design materials (ii) Interior design (soft furnishing) Interior design (soft furnishing) Drawing in interior design (preliminary stage design) Drawing in interior design (presentation drawing) Drawing in interior design (working drawing) Drawing in interior design (practical) Furniture design (i) Furniture design (ii) 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pereka bentuk dalaman 5. TARIKH 9 13 Mei Jangkamasa 5 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM875 / peserta 9. PENYELARAS Pn Norsasuhaida Salleh 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Interior designer 5. DATE 9 13 May DURATION 5 Days 7. VENUE WISDEC Selangor 8. FEE RM875 / participant 9. COORDINATOR Ms Norsasuhaida Salleh 22

25 KEMASIAPAN TEKNOLOGI HIJAU BERASAKAN AIR UNTUK TANGGAM DAN LANTAI GREEN FINISHING WATERBORNE TECHNOLOGY FOR JOINERY AND FLOORING 1. OBJEKTIF i. Untuk memberi pendedahan dalam teknologi terkini dalam aspek kemasiapan khusus untuk Joinery dan Flooring ii. Untuk menerangkan kebaikan dalam green finishing yang lebih mesra kepada alam sekitar dalam aspek VOC (volatile organic compounds) 1. OBJECTIVES i. To provide exposure on latest technology in finishing aspect for Joinery and flooring ii. To explain the advantages of green finishing that is environmental friendly in VOC (volatile organic compounds) aspect KOD: WF KANDUNGAN KURSUS Jenis-jenis kemasiapan dalam industri kayu Kemasiapan konvensional dan waterborne Penyediaan bahan dan formulasi bancuhan bahan Aplikasi kemasiapan ke atas joinery and flooring Praktikal kemasiapan 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Penyelia, line leader dan operator 2. COURSE CONTENTS Types of finishing in wood based industry Conventional and waterborne finishing Material preparation and mixing formulation Finishing application on joinery and flooring Finishing practice 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Supervisor, line leader and operator 5. TARIKH 7 8 Jun Jangkamasa 2 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM350 / peserta 9. PENYELARAS En Mohd Firdaus Md Mortar 5. DATE 7 8 June DURATION 2 Days 7. VENUE WISDEC Selangor 8. FEE RM350 / participant 9. COORDINATOR Mr Mohd Firdaus Md Mortar 23

26 KOD: WF 404 KEMASIAPAN KREATIF DALAM INDUSTRI PERABOT DAN PRODUK BERASASKAN KAYU CREATIVE FINISHING IN FURNITURE INDUSTRY AND WOOD BASED PRODUCT 1. OBJEKTIF i. Meningkatkan kefahaman tentang bahan-bahan kemasiapan terkini untuk produk pasaran eksport ii. Meningkatkan kepelbagaian teknik-teknik kemasiapan kreatif 2. KANDUNGAN KURSUS Pengenalan kepada jenis-jenis kemasiapan kreatif Penyediaan bahan dan formulasi bancuhan bahan Teknik-teknik membuat color matching dalam penggunaan warna Teknik-teknik kemasiapan kreatif dalam proses kemasiapan perabot dan produk berasaskan kayu. Amali kemasiapan 1. OBJECTIVES i. To upgrade skills on current finishing materials for export products ii. To enhanced various techniques on creative finishing 2. COURSE CONTENTS Introduction to the types of creative finishing techniques Materials preparation and formulation Color matching technique in color application Creative finishing technique in furniture finishing process and wood based products Finishing practice 3. METODOLOGI Syarahan / Amali 3. METHODOLOGY Lectures / Hands on training 4. KUMPULAN SASARAN Penyelia, line leader dan operator 5. TARIKH Jun Jangkamasa 3 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM525 / peserta 9. PENYELARAS En Mohd Firdaus Md Mortar 4. TARGET GROUP Supervisor, line leader and operator 5. DATE June DURATION 3 Days 7. VENUE WISDEC Selangor 8. FEE RM525 / participant 9. COORDINATOR Mr Mohd Firdaus Md Mortar 24

27 PEMERINGKATAN KAYU GETAH RUBBERWOOD GRADING 1. OBJEKTIF i. Meningkatkan kefahaman dalam pemeringkatan kayu getah berdasarkan kepada Guideline Grading of Malaysian Rubberwood 1. OBJECTIVE i. To enhance the understanding on rubberwood grading based on the Guideline Grading of Malaysian Rubberwood KOD: WR KANDUNGAN KURSUS Sifat dan pengenalan Kayu Getah Keperluan umum Pemeringkatan Kayu Getah Bergergaji Pemeringkatan kayu getah berketam, papan lapis dan papan tebal (boards & planks) Klasifikasi, definisi, terma dan istilah cacat serta pengukuran cacat Latihan Amali Ujian pemeringkatan kayu getah teori Ujian pemeringkatan kayu getah amali 2. COURSE CONTENTS Characteristic and introduction to rubberwood General requirements of grading for sawn rubberwood Grading for sawn rubberwood, plywood and thick board (boards & planks) Classification, definitions, terms and defects term and measuring defects Practical training Rubberwood grading test theory Rubberwood grading test practical 3. Kelayakan Masuk Pemeringkat kayu, penyelia dan pengawal kualiti (QC) yang berpengalaman sekurang-kurangnya setahun dalam industri berasaskan kayu 4. Peperiksaan Peserta dikehendaki lulus dalam peperiksaan untuk melayakkan menerima Sijil Kelayakan Pemeringkatan Kayu Getah 5. TARIKH 5 7 Julai Jangkamasa 3 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM525 / peserta 9. PENYELARAS Pn Rohaiza Abd Kadir Zailani 3. Qualifications Wood grader, supervisor and quality controller (QC) at least one year experienced in wood-based industry 4. Examination Participants are required to pass examinations to qualify receive Qualification Certificate for Rubberwood Grading 5. DATE 5 7 July DURATION 3 Days 7. VENUE WISDEC Selangor 8. FEE RM525 / participant 9. COORDINATOR Ms Rohaiza Abd Kadir Zailani 25

28 KOD: WM 411 PENGKOSAN DAN BELANJAWAN PRODUK PRODUCT COSTING AND BUDGETING 1. OBJEKTIF i. Untuk meningkatkan kefahaman mengenai pengkosan dan belanjawan produk ii. Untuk memberi pengetahuan mengenai teknik-teknik pengkosan harga produk iii. Mengetahui kriteria utama dalam mempengaruhi kos penghasilan produk 2. KANDUNGAN KURSUS Kepentingan pengkosan produk Komponen-komponen pengkosan produk Kos utama dan kos marginal Faktor-faktor asas yang mempengaruhi kos produk Pelbagai jenis kos produk dan kaedah pengiraan 3. METODOLOGI Syarahan / Praktikal 1. OBJECTIVES i. To enhance understanding of product costing and budgeting ii. To provide techniques knowledge of product price costing iii. To know the main criteria that effecting production cost 2. COURSE CONTENTS The importance of product costing The component of product costing The main cost and marginal cost Basic factors that influence product cost Variety types of product cost and calculation method 3. METHODOLOGY Lecture / Practical 4. KUMPULAN SASARAN Young executives dan designers 5. TARIKH 4 5 Oktober Jangkamasa 2 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM350 / peserta 9. PENYELARAS Pn Rohaiza Abd Kadir Zailani 4. TARGET GROUP Young executives and designers 5. DATE 4 5 October DURATION 2 Days 7. VENUE WISDEC Selangor 8. FEE RM350 / participant 9. COORDINATOR Ms Rohaiza Abd Kadir Zailani 26

29 APLIKASI INVENTOR 2011 DALAM TRANSFORMASI REKABENTUK PERABOT INVENTOR 2011 APPLICATION IN FURNITURE DESIGN TRANSFORMATION 1. OBJEKTIF i. Memberi kemahiran mengenai aplikasi perisian Inventor 2011 dalam reka bentuk perabot ii. Mendedahkan peserta berkenaan ciri-ciri perisian Inventor OBJECTIVES i. To provide skills in Inventor 2011 Software application in furniture design ii. To expose participants to Inventor 2011 Software features KOD: WD KANDUNGAN KURSUS i. Construction Solid Parts Sketched Solid Features Extruded Features Revolved Feature Loft Feature Coil Feature Rib Feature Split Feature Boulean Operating Place Solid Features Feature In a Solid Parts ii. Construction Assemblies of Solid Parts iii. Construction Exploded Presentation of Assemblies iv. Construction Engineer of Technical Drawings 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pengurusan, penyelia dan pereka 5. TARIKH 2 5 November Jangkamasa 4 Hari 7. TEMPAT WISDEC Selangor 8. YURAN RM700 / peserta 9. PENYELARAS Cik Siti Aishah Abu Bakar 2. COURSE CONTENTS i. Construction Solid Parts Sketched Solid Features Extruded Features Revolved Feature Loft Feature Coil Feature Rib Feature Split Feature Boulean Operating Place Solid Features Feature In a Solid Parts ii. Construction Assemblies of Solid Parts iii. Construction Exploded Presentation of Assemblies iv. Construction Engineer of Technical Drawings 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Management, supervisors and designers 5. DATE 2 5 November DURATION 4 Days 7. VENUE WISDEC Selangor 8. FEE RM700 / participant 9. COORDINATOR Ms Siti Aishah Abu Bakar 27

30 E. PROGRAM LATIHAN DI WISDEC SABAH TRAINING PROGRAMME AT WISDEC SABAH

31 APLIKASI PERISIAN AUTOCAD 2011 (2D) AUTOCAD 2011 SOFTWARE APPLICATION (2D) 1. OBJEKTIF i. Mendedahkan peserta mengenai penggunaan AutoCAD 2011 dalam rekabentuk perabot ii. Memahirkan peserta dalam menggunakan perisisan AutoCAD 2011 dalam rekabentuk perabot iii. Memberi info berkenaan features terbaharu dalam AutoCAD OBJECTIVES i. To expose the participants on the usage of AutoCAD 2011 in furniture design ii. To provide skills to participants on the usage of AutoCAD 2011 software iii. To provide information about a new features in AutoCAD 2011 KOD: WD KANDUNGAN KURSUS Pengenalan kepada AutoCAD 2011 Arahan-arahan asas lukisan Sistem koordinat dan drawing set-up Object snap Arahan penyuntingan asas Layer dan match property Lorekan Penandaan dimensi Plotting 2. COURSE CONTENTS Introduction to AutoCAD 2011 Basic instructions on drawing Coordinate system and drawing set-up Object snap Basic instruction on editing Layer and match property Shade Dimension marking Plotting 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pereka, penyelia pengeluaran dan pengurus 5. TARIKH 7 10 Mac Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM700 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Designer, production supervisors and manager 5. DATE 7 10 March DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM700 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 29

32 KOD: WD 414 APLIKASI PERISIAN AUTOCAD 2011 LANJUTAN (3D) AUTOCAD 2011 SOFTWARE APPLICATION ADVANCED (3D) 1. OBJEKTIF i. Memberi kefahaman, kemahiran dan pendedahan peserta mengenai penggunaan AutoCAD dalam rekabentuk perabot (Lanjutan) ii. Memastikan peserta dapat menguasai kemahiran dalam AutoCAD 2. KANDUNGAN KURSUS Isometric projection (Part 1 & Part 2) Basic 3D shapes 3D-Extrusion Method 3D-UCS, UCSICON & wireframe modes 3D plotting AutoCAD render & lighting principles 3D surface 3D Solids (Part 2 & Part 2) 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pereka, penyelia pengeluaran dan pengurus 5. TARIKH Mac Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM700 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 1. OBJECTIVES i. To provide knowledge, skills and to expose participants about the usage of AutoCAD in furniture design (advanced) ii. To insure participants can master the skills in AutoCAD 2. COURSE CONTENTS Isometric projection (Part 1 & Part 2) Basic 3D shapes 3D-Extrusion Method 3D-UCS, UCSICON & wireframe modes 3D plotting AutoCAD render & lighting principles 3D surface 3D Solids (Part 2 & Part 2) 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Designer, production supervisors and manager 5. DATE March DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM700 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 30

33 TEKNOLOGI DAN OPERASI MESIN CNC ROUTER TECHNOLOGY AND OPERATION OF CNC ROUTER MACHINE 1. OBJEKTIF i. Meningkatkan kefahaman dalam pengaturcaraan mesin CNC Router ii. Memahirkan peserta berkenaan panel kawalan dan operasi mesin CNC Router 1. OBJECTIVES i. To improve knowledge in operational of CNC Router machine ii. To provide skills of panel controlling and CNC Router machine operation to participant KOD: WT KANDUNGAN KURSUS Pengenalan kepada mesin CNC Router Kaedah pengaturcaraan CNC Router Kawalan dan operasi panel mesin Operasi CNC Router secara manual dan automatik Pelarasan mesin CNC Router Penyelarasan Mesin CNC Router 3. METODOLOGI Syarahan / Amali 2. COURSE CONTENTS Introduction to CNC Router machine CNC router operational method Controlling and operation of panel machines Manual and automatic operation of CNC Router CNC Router machines alignment CNC Router machines adjustment 3. METHODOLOGY Lectures / Hands on training 4. KUMPULAN SASARAN Pengurus, penyelia pengeluaran, juruteknik dan operator mesin CNC 5. TARIKH April Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM700 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 4. TARGET GROUP Manager, operation supervisor, technician and CNC machine operator 5. DATE April DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM700 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 31

34 KOD: WD APLIKASI INVENTOR 2011 DALAM TRANSFORMASI REKABENTUK PERABOT INVENTOR 2011 APPLICATION IN FURNITURE DESIGn TRANSFORMATION 1. OBJEKTIF i. Memberi kemahiran mengenai aplikasi perisian Inventor 2011 dalam reka bentuk perabot. ii. Mendedahkan peserta berkenaan ciri-ciri perisian Inventor KANDUNGAN KURSUS i. Construction Solid Parts Sketched Solid Features Extruded Features Revolved Feature Loft Feature Coil Feature Rib Feature Split Feature Boulean Operating Place Solid Features Feature In a Solid Parts ii. Construction Assemblies of Solid Parts iii. Construction Exploded Presentation of Assemblies iv. Construction Engineer of Technical Drawings 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pengurusan, penyelia dan pereka 5. TARIKH Mei Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM700 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 1. OBJECTIVES i. To provide skills in Inventor 2011 Software application in furniture design ii. To expose participants to Inventor 2011 Software features 2. COURSE CONTENTS i. Construction Solid Parts Sketched Solid Features Extruded Features Revolved Feature Loft Feature Coil Feature Rib Feature Split Feature Boulean Operating Place Solid Features Feature In a Solid Parts ii. Construction Assemblies of Solid Parts iii. Construction Exploded Presentation of Assemblies iv. Construction Engineer of Technical Drawings 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Management, supervisors and designers 5. DATE May DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM700 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi

35 REKABENTUK DALAMAN (PERABOT RUANG TAMU) INTERIOR DESIGN (LIVING ROOM FURNITURE) 1. OBJEKTIF i. Memberi status terkini berkenaan perkembangan rekabentuk dalaman (perabot ruang tamu) ii. Memahirkan peserta dalam merekabentuk perabot ruang tamu seiring dengan kehendak semasa 1. OBJECTIVES i. To provides the latest status on the Interior designing development (living room furniture) ii. To enhance participant skills in living room designing in line with the current needs KOD: WD KANDUNGAN KURSUS Pengenalan kepada rekabentuk Bahan dalam rekabentuk dalaman (i) Bahan dalam rekabentuk dalaman (ii) Interior design (soft furnishing) Interior design (soft furnishing) Drawing in interior design (pleminary stage design) Drawing in interior design (presentation drawing) Drawing in interior design (working drawing) Drawing in interior design (working drawing Furniture design (i) Furniture design (ii) 2. COURSE CONTENTS Introduction to designing Interior design materials (i) Interior design materials (ii) Interior design (soft furnishing) Interior design (soft furnishing) Drawing in interior design (pleminary stage design) Drawing in interior design (presentation drawing) Drawing in interior design (working drawing) Drawing in interior design (working drawing Furniture design (i) Furniture design (ii) 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pereka bentuk dalaman 5. TARIKH Jun Jangkamasa 5 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM875 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Interior designer 5. DATE June DURATION 5 Days 7. VENUE WISDEC Sabah 8. FEE RM875 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 33

36 KOD: WC 403 PEMBUATAN JIGS DAN FIXTURES JIGS AND FIXTURES MAKING 1. OBJEKTIF i. Meningkatkan kemahiran dalam pembuatan jigs dan fixtures dalam pembuatan perabot ii. Untuk memberikan kefahaman mengenai kepentingan jigs dan fixtures 2. KANDUNGAN KURSUS Jenis-jenis jigs/fixtures dan penggunaan Pemilihan Bahan Bahan dan Peralatan Jigs/Fixtures Penggunaan jigs/fixtures dalam mesin kerja kayu Proses dan kos jigs/fixtures Keselamatan dan kesihatan 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Penyelia pengeluaran dan line leader 5. TARIKH 4 7 Julai Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM700 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 1. OBJECTIVES i. To upgrade skills in the makinag and utilization of jigs and fixtures for furniture production ii. To provide understanding on the importance of jigs and fixtures 2. COURSE CONTENTS Types of jigs/fixtures and its application Selection of materials Jigs/fixtures materials and tools Jigs/fixtures application in wood-working machines Jigs/fixtures cost and process Health and safety 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Operation supervisors and line leader 5. DATE 4 7 July DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM700 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 34

37 PEMERINGKATAN KAYU GETAH RUBBERWOOD GRADING 1. OBJEKTIF i. Meningkatkan kefahaman dalam pemeringkatan kayu getah berdasarkan kepada Guideline Grading of Malaysian Rubberwood 1. OBJECTIVE i. To enhance understanding on the rubberwood grading based on Guideline Grading of Malaysian Rubberwood KOD: WR KANDUNGAN KURSUS Sifat dan pengenalan kayu getah Keperluan umum pemeringkatan kayu getah bergergaji Pemeringkatan kayu getah berketam, papan lapis dan papan tebal (boards & planks) Klasifikasi, definisi, terma dan istilah cacat serta pengukuran cacat. Latihan amali Ujian pemeringkatan kayu getah teori Ujian pemeringkatan kayu getah amali 3. KELAYAKAN Pemeringkat kayu, penyelia dan pengawal kualiti (QC) yang berpengalaman sekurang-kurangnya setahun dalam industry berasaskan kayu 2. COURSE CONTENTS Characteristic and introduction to rubberwood General requirements of grading for sawn rubberwood Grading for sawn rubberwood, plywood and thick board (boards & planks) Classification, definitions, terms and defects term and measuring defects Practical training Rubberwood grading test theory Rubberwood grading test practical 3. QUALIFICATION Wood grader, supervisor and quality controller (QC) at least one year experienced in wood-based industry 4. PEPERIKSAAN Peserta dikehendaki menduduki peperiksaan dan lulus untuk melayakkan menerima Sijil Kelayakan Pemeringkatan Kayu Getah 5. KUMPULAN SASARAN Penyelia pengeluaran dan line leader 6. TARIKH September Jangkamasa 3 Hari 8. TEMPAT WISDEC Sabah 9. YURAN RM525 / peserta 10. PENYELARAS En Hamdi Haji Mawardi 4. EXAMINATION Participants are required to pass examinations to qualify receive Qualification Certificate for Rubberwood Grading 5. TARGET GROUP Operation supervisors and line leader 6. DATE September DURATION 3 Days 8. VENUE WISDEC Sabah 9. FEE RM525 / participant 10. COORDINATOR Mr Hamdi Haji Mawardi 35

38 KOD: WF 404 KEMASIAPAN KREATIF DALAM INDUSTRI PERABOT DAN PRODUK BERASASKAN KAYU CREATIVE FINISHING IN FURNITURE INDUSTRY AND WOOD BASED PRODUCT 1. OBJEKTIF i. Meingkatkan kefahaman tentang bahan-bahan kemasiapan terkini untuk produk pasaran eksport ii. Meningkatkan kepelbagaian teknik-teknik kemasiapan kreatif 2. KANDUNGAN KURSUS Penyediaan kepada jenis-jenis kemasiapan kreatif Penyediaan bahan dan formulasi bancuhan bahan Teknik membuat color matching dalam penggunaan warna Teknik kemasiapan kreatif dalam proses kemasiapan perabot berasaskan kayu Anggaran kos Amali 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pengurus, penyelia pengeluaran dan eksekutif 5. TARIKH Oktober Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM525 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 1. OBJECTIVES i. To upgrade skills on current finishing materials for export products ii. To enhanced various tecjniques on creative finishing 2. COURSE CONTENTS Introduction to the types of creative finishing techniques Materials preparation and formulation Color matching technique in color usage Creative finishing technique in wood based products Cost estimation Practical 3. METHODOLOGY Lectures / Hands on training 4. TARGET GROUP Manager, supervisors and executive 5. DATE October DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM525 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 36

39 PENGKOSAN DAN BELANJAWAN PRODUK PRODUCT COSTING & BUDGETTING 1. OBJEKTIF i. Untuk meningkatkan kefahaman mengenai pengkosan dan belanjawan produk ii. untuk memberi pengetahuan mengenai teknik-teknik pengkosan harga produk iii. Mengetahui kriteria utama dalam mempengaruhi kos penghasilan produk 1. OBJECTIVES i. To enhance understanding of product costing and budgeting ii. to provide techniques knowledge of product price costing iii. To know the main criteria that effecting production cost KOD: WM KANDUNGAN KURSUS Kepentingan pengkosan produk Komponen-komponen pengkosan produk Kos utama dan kos marginal Faktor-faktor asas yang mempengaruhi kos produk Pelbagai jenis kos produk dan kaedah pengiraan Asas dalam mengurangkan kos produk 3. METODOLOGI Syarahan / Praktikal 2. COURSE CONTENTS The importance of product costing The component of product costing The main cost and marginal cost Basic factors that influence product cost Variety types of product cost and calculation method Basis to reduce cost of product 3. METHODOLOGY Lecture / Practical 4. KUMPULAN SASARAN Pengurus, eksekutif, penyelia kewangan dan penyelia pengeluaran 5. TARIKH Oktober Jangkamasa 3 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM525 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 4. TARGET GROUP Managers, executives, financial supervisor and production supervisor 5. DATE October DURATION 3 Days 7. VENUE WISDEC Sabah 8. FEE RM525 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 37

40 KOD: WM 421 PENGURUSAN SISTEM KESELAMATAN DAN KESIHATAN (OSH-MS) DALAM OPERASI PENGELUARAN PERABOT SAFETY AND HEALTH MANAGEMENT SYSTEM (OSH-MS) IN FURNITURE PRODUCTION OPERATION 1. OBJEKTIF i. Meningkatkan kefahaman dan kesedaran terhadap aspekaspek keselamatan dan kesihatan dalam industri kayu ii. Melaksanakan keperluan aspek keselamatan dan kesihatan dalam industri kayu mengikut OSH-MS 2. KANDUNGAN KURSUS Pematuhan Kepada Akta Keselamatan dan Kesihatan Pekerjaan 1994 (OSHA) dalam pengurusan sistem keselamatan dan kesihatan - Polisi Keselamatan dan Kesihatan Pekerjaan Pembentukan jawatankuasa keselamatan dan kesihatan dalam industri Peranan jawatankuasa keselamatan dan kesihatan Pengenalpastian Hazard, Penilaian Risiko dan Kawalan (HIRARC) Kepentingan Analisis Kerja Selamat (JSA) dalam industry kayu Laporan Kemalangan Mengikut Jabatan Keselamatan dan Kesihatan 3. METODOLOGI Syarahan / Amali 4. KUMPULAN SASARAN Pengurusan, penyelia pengeluaran, pegawai OSH dan operator 5. TARIKH November Jangkamasa 4 Hari 7. TEMPAT WISDEC Sabah 8. YURAN RM700 / peserta 9. PENYELARAS En Hamdi Haji Mawardi 1. OBJECTIVES i. To enhance understanding and awareness of safety and health aspects in wood industry ii. To implement safety and health requirements in wood industry under OSH-MS 2. COURSE CONTENTS Compliance with the Occupational Safety and Health Act 1994 (OSHA) in safety and health management system - Occupational Safety and Health policy Establish the committee of safety and health in industry The role of safety and health committee Hazard Identification, Risk Assessment and Control (HIRARC) Importance of Job Safety Analysis (JSA) in wood industry Accident Report by the Department of Safety and health 3. METHODOLOGY Lecture / Practical 4. TARGET GROUP Management, production supervisor, OSH officer and operator 5. DATE November DURATION 4 Days 7. VENUE WISDEC Sabah 8. FEE RM700 / participant 9. COORDINATOR Mr Hamdi Haji Mawardi 38

41 F. PROGRAM LATIHAN BELIA YOUTH TRAINING PROGRAMMES

42 CERTIFICATE IN FURNITURE DESIGN AND MAKING (FDM) 1. INTRODUCTION 1.1 The Furniture Design and Making (FDM) is a programme which offers industrial skills in designing and furniture making to young designers and fresh graduates. 1.2 Upon completing the programme, trainees will be able to contribute professionally towards sustaining the growth of the Malaysian wood-based industry. 2. OBJECTIVE AND CONCEPT OF THE SCHEME 2.1 The objectives of the programme are as follows:- a. To provide higher employability in the wood-based industry for graduates. b. To provide enhanced career growth for graduates. c. To provide industry knowledge and skills through hands-on training; and d. To provide large pools of skilled designers in the timber industry. 3. CAREER OPPORTUNITIES 3.1 Students will gain an in-depth insight into the professional process of solid timber furniture making from desigining stage to the end products. Students will be equipped with formal classroom sessions in furniture designing as well as translating design into product making. After course completion, trainees may decide to pursue their career with furniture companies as designers or to be self-employed. 4. IMPLEMENTATION 4.1 Entry requirements:- a. Diploma or Bachelor Degree in furniture design. b. Age between 18 to 25 years. c. Has strong interest in the field and has intention to work with the industry or wish to be an entrepreneur. 4.2 Training Methodology This programme emphasizes on hands-on training where trainees are given continuous practical application exercises, along with formal classroom training by competent and highly experienced trainers from WISDEC as well as members of the timber industry. Students will learn materials in furniture making, machines and tools in fine woodworking, development and construction of furniture in wood, drawing and design; and business skills This approach is extremely important as practical activities will enhance the effectiveness of the training. The trainees are also taken on visits to factories for better exposure to the industry and to ensure a more complete training experience. 40

43 4.3 Competencies Module:- a. The programme is structured for attainment of specific competencies. Details of the module is as below:- Code Material Module Duration FDM - 1 Safety & Health 12 hrs FDM - 2 Introduction to Furniture Design 18 hrs FDM - 3 Material and Structure of Furniture 24 hrs FDM - 4 Drawing, Reading and Making 18 hrs FDM - 5 Tools & Machines for Wood Furniture Making 36 hrs FDM - 6 Furniture Design Drawing 36 hrs FDM - 7 Furniture Making 126 hrs Total 270 hrs 4.4 Medium of Instruction The medium of instruction will be in English and Bahasa Melayu. 4.5 Duration of programme 2 months 4.6 Certification Upon successfully completing the programme, trainees will be awarded the Certificate of Competency which is recognized by MTIB and the industry. 4.7 Fully Sponsored Programme Training fees are fully sponsored by MTIB. This includes registration, accommodation and transport. A subsistence allowance is also provided for all participants 41

44 CERTIFICATE IN TIMBER PROCESSING AND FINISHING TECHNOLOGY (TPF) 1. INTRODUCTION 1.1 The Certificate in Timber Processing and Finishing Technology (TPF) is a programme which provides an avenue for youths to enhance skills and knowledge on the wood- based industry. The intensive hands-on training provides a structured skills enhancement programme and is designed to produce competent, effective and skilled workforce to support the nation s growing wood-based industry. 2. OBJECTIVE AND CONCEPT OF THE SCHEME 2.1 The objectives of the programme are as follows:- a. To provide career opportunities for PMR/SPM/SPMV leavers to enter the wood-based industry. b. To provide enhanced knowledge and skills through a structured skills training programme; and c. To provide skills and career advancement possibilities in the wood-based industry CAREER OPPORTUNITIES 3.1 The Malaysian timber industry stands as one of the most promising sectors in the plantation and commodities arena. Since the launch of the First Industrial Master Plan in 1986, the wood-based industry has been accorded as one of the most promoted industry in the sector. As a result of that the industry has grown rapidly and has become a major source of revenue for the country. Consequently, there are great prospects for the graduates of this programme to be quickly and easily absorbed by the industry. 3.2 Some of the prospects include: a. Higher employability value in the job market. b. The curriculum is structured to meet industry needs. c. TPF graduates are eligible for upgrading programmes. d. Career guidance is provided as part of the programme. e. Certificate holders will be able to work and enhance skills simultaneously through other WISDEC training programmes. 4. IMPLEMENTATION 4.1 Entry requirements:- a. Pass in PMR, SPM, SPMV or its equivalent. b. Age between 18 to 30 years. c. Has strong interest in the field and has intention to work with the industry. 4.2 Training Methodology This programme emphasizes on hands-on training where trainees are given continuous practical application exercises, along with formal classroom training by competent and highly experienced trainers from WISDEC as well as members of the timber industry. This approach is extremely important as practical activities will enhance the effectiveness of the training. The trainees are also taken on visits to factories for better exposure to the industry and to ensure a more complete training experience.

45 4.3 Competencies Module:- a. The programme is structured for attainment of specific competencies. Details of the module (Level I) is as below:- Code Material Module Duration M01-1 Wood Anatomy I 18 hrs M01-2 Wood ID I 90 hrs M01-3 Wood Technology I 42 hrs M01-4 Grading I (GMS,Strips) 60 hrs M01-5 KD/ Preservation I 90 hrs M01-6 Inventory, Safety & Health 18 hrs M01-7 Material Handling 30 hrs M01-8 Industrial Attachment I 72 hrs Total 420 hrs Code Production Module Duration P01-1 Safety 18 hrs P01-2 Communication 90 hrs P01-3 Technical Drawing 42 hrs P01-4 Estimated Material 60 hrs P01-5 Wood Machining 90 hrs P01-6 Quality Management 18 hrs P01-7 Assembly and Packaging 30 hrs 4.4 Medium of Instruction The medium of instruction will be in English and Bahasa Melayu. 4.5 Duration of programme 9 months Code Material Module Duration P01-8 Prototype and Making (Evaluation) 72 hrs 4.6 Certification Upon successfully completing the programme, trainees will be awarded the Certificate of Competency which is recognized by MTIB and the industry. 4.7 Fully Sponsored Programme Training fees are fully sponsored by MTIB. This includes registration, accommodation and transport. A subsistence allowance is also provided for all participants. Total 420 hrs Code Finishing Module Duration F01-1 Safety & Health, Pollution 12 hrs F01-2 Introduction of wood and wood based product 12 hrs F01-3 Rules in set-up finishing shop 18 hrs F01-4 Layout and Finishing Flow 12 hrs F01-5 Finishing Materials 12 hrs F01-6 Finishing Equipments and Systems 30 hrs F01-7 Technique and Process of Finishing 120 hrs F01-8 F01-9 Types of finishes and method of applications Quality Control and Tests for Properties of Coating Materials and Dry Film Coating I 90 hrs 30 hrs F01-10 Costing 18 Total 354 hrs 43

46 WOOD-BASED INDUSTRY APPRENTICESHIP SCHEME (FURNITURE) 1. OBJECTIVE AND CONCEPT OF THE SCHEME 1.1 The objectives of the Wood-based Industry Apprenticeship Scheme (Furniture) are as follows:- a. to provide structured multi-skill training in the industry for PMR/SPM school leavers before joining the industry. b. to meet the increasing demand for skilled workers in the wood-based industry (furniture) within a robust economy; and c. to provide trainees with recognized qualification which can be used for further can be used for further retraining and skills upgrading for career progression within the industry. 1.2 The scheme has been developed with a combination of theoretical training at selected training institutions, which emphasise on skills training and structured on-the-job training at the premises of sponsoring employers. 2. IMPLEMENTATION 2.1 Sources of Apprentices/Entry Qualification The target group of this scheme is PMR/SPM holders. Employers may recruit apprentices from their own sources or from PSMB s potential candidates database. The employers and Training Providers are also tree to advertise for candidates. Apprentices must have at least a pass in Mathematics and English to qualify for the Wood-based Industry Apprenticeship Scheme (Furniture). 2.2 Curriculum Training providers and sponsoring employers must use the curriculum provided by PSMB. The curriculum has been developed by PSMB in collaboration with the Malaysian Timber Industry Board (MTIB) after extensive discussions with the industry. The functional areas covered are:- a) Phases 1 - Furniture Production Operation b) Phase 2 - Furniture Production Line Leader The curriculum is divided into 2 phases comprising of 38 weeks in Off-The-Job training. Upon completion of each training block at the premises of training providers, apprentices will undergo 26 weeks of On-The-Job training at the premises of sponsoring employers to provide real-life learning. In general, the scheme consists of 30% theoretical and 70% practical training. 2.3 Competencies Module:- a. The programme is structured for attainment of specific competencies. Details of the module is as below:- 44

47 Level 1 Furniture Production Operator Code Module Off-The-Job On-The-Job WI 101 Introduction to Wood-Based Industry 30 hrs 0 WI S1 Workplace Communication 30 hrs 0 WI S2 Team Building 30 hrs 0 WI 102 Safety and Health 14 hrs 7 hrs WI 103 Quality Workforce & Assurance 35 hrs 28 hrs WI 104 Technical Drawing I 77 hrs 35 hrs WI 105 Wood Technology I 70 hrs 7 hrs WI 106 Introduction to Non-Wood Based Furniture Material 7 hrs 7 hrs WI 107 Wood Machining and Operation I 154 hrs 80 hrs WI 108 Wood Adhesive 35 hrs 16 hrs WI 109 Jointing Techniques 70 hrs 60 hrs WI 110 Furniture Finishing I 56 hrs 60 hrs WI 111 Assembly Method 63 hrs 60 hrs WI 112 Knife Grinding 49 hrs 60 hrs Total (Hours) 720 hrs 420 hrs Level 2 Furniture Production Line Leader Code Module Off-The-Job On-The-Job WI S3 Introduction to Computer 30 hrs 0 WI 201 Industrial Rules and Practices 49 hrs 30 hrs WI 202 Packaging Method and Control 49 hrs 30 hrs WI 203 Quality Control 40 hrs 78 hrs WI 204 Technical Drawing II 43 hrs 32 hrs WI 205 Wood Technology II 31 hrs 21 hrs WI 206 Inventory Control 24 hrs 48 hrs WI 207 Wood Machining and Operation II 63 hrs 91 hrs WI 208 Wood Lamination 42 hrs 48 hrs WI 209 Prototype Making 140 hrs 9 hrs WI 210 Furniture Finishing II 98 hrs 98 hrs Total (Hours) 609 hrs 574 hrs 45

48 2.4 Medium of Instruction The medium of instruction will be in English. 2.5 Duration of Training Training Phases 1 Phases 2 Total Off-The-Job (weeks) On-The-Job (weeks) Certification Upon successfully completing the competency test conducted by Department of Skills Development, apprentices will be awarded with the Malaysian Skill Certificate Level 1 and Level Course Fee The course fee of the Wood-based Apprenticeship Scheme (Furniture) will be paid by PSMB under the Apprenticeship Fund, which was set up to assist employers, particularly small and medium employers. However, for the course fee to be paid by PSMB under the Apprenticeship Fund, apprentices must be sponsored by employers registered with PSMB. 2.8 Monthly Allowance Apprentices are eligible to get monthly allowance of between RM RM from sponsoring employers. 46

49 G. AKUAN TESTIMONIAL

50 AKUAN TESTIMONIAL Pusat latihan kemahiran seperti WISDEC telah banyak memberi pengetahuan dan seni kemahiran kepada saya dalam bidang perabot. Saya amat berharap pusat latihan seperti WISDEC akan meneruskan usaha murni mereka untuk membantu belia seperti saya untuk mendapatkan kemahiran dalam bidang perkayuan. Selain itu, dengan adanya kemahiran yang diperolehi, para belia akan lebih mudah mendapat pekerjaan dalam industri perkayuan. Siau Cheat Leng WISDEC training centre has provided me much knowledge and skills in furniture processing field. I hope training centre such as WISDEC will continue their good efforts in assisting youth like me to acquire skills in timber industry. Apart from that, with skills achieved, it would be easier for youths in getting jobs in timber industry. Nor Ainun Radiah bt Razali Program yang ditawarkan di WISDEC menyediakan persekitaran yang profesional yang mengaplikasikan perkembangan intelektual menjurus ke arah menerap dan meningkatkan kemahiran dalam bidang rekabentuk. Ia membolehkan peserta berkembang sebagai perekabentuk dan meningkatkan keupayaan untuk mengenalpasti dan peka terhadap kecenderungan sosial, teknologi dan ekonomi masa kini, memulakan pendekatan baru dalam rekabentuk perabot dan dapat bekerja dalam pasukan yang berketrampilan dalam pelbagai bidang terutamanya dalan industri berasaskan kayu. The programmes at WISDEC provide a professionally oriented environment that applies intellectual development directly to design practice and enhance design skills. It enable participants to evolve as designers to develop the ability to identify and alert of current social, technological and economic trends, to initiate new approaches to furniture design, and to be able to work in multidisciplinary teams especially in wood industry. 48

51 H. PAKATAN STRATEGIK STRATEGIC ALLIANCES

52 STRATEGIC ALLIANCES / PAKATAN STRATEGIK WISDEC telah diiktiraf di peringkat tempatan dan antarabangsa dalam menyediakan latihan dan khidmat perundingan bagi industri berasaskan kayu. WISDEC has been recognised locally and internationally in providing training and consultancy services in the wood-based industry. Local International Industry / Associations - LY Furniture Sdn. Bhd. - TTITC United Kingdom (FIRA, UK) ask Malaysian Furniture Promotion Council Higher Learning Institutions Italy (ACIMALL, SCM, ACM) ACIMALL scm Germany (Weinig, Alterndarf) Research organizations FRIM, MPOB Machine suppliers Government agencies PSMB / JPK / BPTV JPSM, Sabah PUSAKA, Sarawak UNIVERSITI PUTRA MALAYSIA WEINIG GROUP Japan (JICA) Japan International Cooperation Agency Taiwan (MTCP) Pingtung / Yunlin University MTCP (Malaysia Technical Cooperation Programme) Furniture Pakistan (Ministry of Industry and Production) 50

53 I. PEMUDAH CARA FACILITATORS

54 FACILITATORS / PEMUDAH CARA Kamaruddin Othman holds a Bachelor of Science in Furniture Technology from University Institute Technology of MARA. He has 29 years working experience in wood based industry and public sector such as a supervisor in furniture manufacturing and sawmilling. He had served MTIB as a Utilisation Officer involved in Technical Training unit, Senior Asst Uitilisation Officer, Training Officer in WISDEC, Head of MTIB Johor Branch Office and Head of WISDEC from He involves with a lot of consultancy services such as setting up Vendor of small furniture line, technical services in sawmilling (selection of timber species), timber drying, timber treatment both tropical and rubberwood, furniture making, wood machining, gluing and wood finishing. He was awarded twice Khidmat Cemerlang from MTIB and conferred AMN from his majesty Yang dipertuan Agong. Muhamad Faizul Razilah holds a Degree in Wood, Pulp and Coating Technology from University Science of Malaysia. He has experienced as a Quality Control Officer in Particle Board and Pulp and Paper Manufacturing. He is actively involved in youth training skills since He has attended numerous skills training such as Furniture Technology Production (United Kingdom). Mohd Faizal Abdul Rodzak holds a Diploma in Forestry and Bachelor of Forestry Science from Universiti Putra Malaysia, Serdang. He joined MTIB in 2006 as a technical training officer. He has 3 years experienced in safety and health in the furniture industry. Currently he holds a position as an Assistant Director and a course instructor specializes in safety and health in Wood-Based Industry and factory operation management for WISDEC Sabah. He is a qualified trainer and recognised by DSD and PSMB. He attended several training namely Furniture Technology Production (FIRA, United Kingdom) in 2007 and Safety and Health Officer Course under National Institute of Occupational Safety and Health (NIOSH) in Mohamad Fu ad Ishak Holds a Diploma in Agriculture from University Putra Malaysia. He has gained several experiences in different fields such as Trainer Scheme Training Special Graduate, Quality control Officer at Plastic Sdn Bhd, technical officer at MTIB Kuala Lumpur, Head of MTIB Tawau and Industrial Training officer in WISDEC Banting. He specializes in Industrial Rules, Safety and Health Management. He was also trained in CNC Machining from Central Institute of Tool Design, Hyderabad, India, CNC Machining and Programming from Busselato, Italy and Safety and Health Officer Course from NIOSH. Saupi Mat Nawi has 18 years working experience in several units in MTIB such as Enforcement Officer in Tawau branch, Enforcement Officer in MTIB headquarters and Industrial Training Officer in WISDEC. He has involved 52

55 in several consultancy services such as Use of Timber in Construction for Forestry Department of Brunei, wood identification for Forestry Department & JKR Brunei, wood Identification & timber grading for Beautrend Development Sdn Bhd, timber drying for Ekowood International Berhad, wood identification for Jabatan Kerja Raya (JKR) Malaysia, wood identification for Kastam Diraja Malaysia (KDM), wood identification for Lembaga Pertubuhan Peladang (LPL) and wood technology for LY Furniture Sdn. Bhd. He was trained as a Vocational Training Officer from DSD, basic investigation course from BPR, train the trainer (TTT) from PSMB, evaluation on effectiveness of training (EET)- PSMB, wood machining (moulder) from WEINIG Singapore, technology study mission from Cologne & Hanover Germany and furniture technology from FIRA United Kingdom. He was awarded as Anugerah Pekerja Contoh from MTIB Wilayah Sabah and Anugerah Khidmat Cemerlang from MTIB. Azhar Ayup holds a Diploma in Wood Technology from MARA University of Technology (UiTM). He has 12 years of hands-on experience in quality control and manufacturing in furniture industry and 5 years experience in training. He is a training officer and course instructor specialises in Computer Aided Design and Manufacturing CAD/CAM, Furniture Design and Making for WISDEC. He is a competent trainer recognised by DSD and PSMB. He has attended numerous skills training namely Furniture Technology Production (United Kingdom), Alpha CAM (Italy), Workshop on Optimising for Higher Yield in Wood Processing (Singapore), Furniture Design and Making (Taiwan). He is a member of SIRIM Ergonomics Committee, Ministry of Education as well as Ministry of Rural and Regional Development School Furniture Specification Committee. He has involved in several consultancy services in Qui Nhon City, Binh Dinh province Viet Nam, in the areas of Wood Processing Training Needs Analysis and Technical Training Programme. Reza Faidzal Md Daud, is a graduate of MARA University of Technology (UiTM) and holds a Diploma in Wood Industry in He has been working with MTIB for more than 6 years. He is currently a Technical Officer specialize in Furniture Finishing at WISDEC Sabah. During his first 5 years at WISDEC Sabah, he had attended several training courses on furniture making and machining at FIRA, UK, Italy and local training centre. He is holding a Vocational Training Officer (VTO) Certificate and Malaysia Skills Certificate Level 1 and 2 on Furniture Maker which recognised by the Department of Skills Development Malaysia (DSD). He is also a member of the team that developed the National Occupation Core Competency (NOCC) in Veneer and Plywood Processing for National Dual Training System (NDTS). 53

56 J. BORANG PERMOHONAN APPLICATION FORM