Private Security Industry Regulatory Authority

Size: px
Start display at page:

Download "Private Security Industry Regulatory Authority"

Transcription

1 Private Security Industry Regulatory Authority 2 June 2008 Dear Training Provider COMMUNIQUÉ: NEW PROPOSED STATUTORY TRAINING STANDARDS FOR THE PRIVATE SECURITY INDUSTRY AND ACCREDITATION WITH A. INTRODUCTION This is a second joint communiqué between the Safety and Security Sector Education and Training Authority () and the Private Security Industry Regulatory Authority (PSIRA). The purpose of this communiqué is to inform training providers who are registered with PSIRA and offering the grades and other specialized training as well as -accredited training providers of the new proposed statutory training standards for the private security industry, and to advise the industry on accreditation procedures with. As previously communicated in the joint communiqué dated 5 October 2006, a Memorandum of Understanding (MOU) was signed between PSIRA and on 4 July In terms of this MOU, will assume the quality assurance function of all training conducted in the security industry. Whilst the Private Security Industry Regulation Act (Act No. 56 of 2001) stipulates the requirement that all those who fall within the definition of security service provider (which includes persons providing training in the security field) must comply with the registration provisions and be registered with PSIRA before becoming active in the 1

2 industry, will, in terms of the MOU, quality assure all education and training in the security industry. In terms of the transitional provisions of the Private Security Industry Regulations Act, the Training of Security Officers Regulations, 1992 made in terms of the repealed Security Officers Act remained in force. These Regulations made provision for the continuance of the PSIRA- accredited training courses, i.e. grades A to E, Armed Response, etc, which is still the case. However, as qualifications and unit standards were developed within the security industry, PSIRA will, in due course, repeal the Training of Security Officers Regulations, 1992 and replace the minimum training requirements for security service providers with an outcomes-based system built on skills programmes consisting of unit standards registered on the National Qualifications Framework (NQF), and quality assured by. NB: With regards to the aforementioned issues, all training providers who are currently registered and accredited with PSIRA and offering the grades and other training (Grades E to A and specialized training) as well as future training providers MUST, as a matter of urgency apply to to be an accredited security training provider. B. ACCREDITATION PSIRA-accredited training providers or new providers intending to offer the NQF aligned courses can access the provider accreditation documentation from the website, - Click on ETQA - Click on the drop down box About ETQA - Scroll to the bottom - There are 5 booklets namely: - Accreditation Application Form, - Provider Accreditation Manual, - Provider Programme Evaluation, - Form, Provider Self Evaluation Form, and 2

3 - Criteria and Application form for the registration of Assessors and Moderators. Training providers are requested to download the necessary documentation and familiarize themselves with the necessary requirements. The Provider Accreditation Manual (page 15 to 27) clearly specifies the criteria for accreditation as a provider. There MUST be registered assessors and moderators linked to the training provider for specific unit standards which they are applying to present. (Refer to the Criteria and Application form for the Registration of Assessors and Moderators for more information.) C. NEW PROPOSED STATUTORY TRAINING STANDARDS FOR THE PRIVATE SECURITY INDUSTRY One of the most important issues in the PSIRA/ interaction during the last year was the development of new training standards for all the categories or classes of security service providers which will ultimately replace the current courses as prescribed in the Training of Security Service Provider Regulations, The new proposed training standards (skills programmes) were compiled from, inter alia, the following SAQA registered qualifications: (NC- National Certificate /FETC Further Education and Training Certificate) NC : General Security Practices (Level 3) FETC : Specialist Security Practices (Level 4) FETC : Use of Firearms (Level 4) FETC : Firearm Training (Level 4) FETC : Dog Handling (Level 4) NC : Locksmithing (Level 3) NC : Close Protection (Level 5) FETC : Electronic Security Installation Practices (Level 4) FETC : Generic Management (Level 4) NC : Generic Management (Level 5) NC : Resolving of Crime (Level 5) NC : Policing (Level 5) The skills programmes include, inter alia, training standards for the following categories or classes of security service providers: 3

4 Guarding Sector (grades E-A) Generic Management and Management for all the particular categories or classes of security service providers Consultants / Advisors Reaction Officers Assets In Transit Retail Security Special Events Close Protection Electronic security which includes CCTV, Alarm Systems, Access Control, Fire Detection, X-Ray Inspection, Metal Detection, Bomb Detection, Monitoring / Interception Devices and Satellite Tracking Locksmith and Safe Technicians Private Investigators Dog Handlers Training Instructor / Facilitator National Key Point Officers The above skills programmes for each of the categories or classes referred to above can be viewed on PSIRA s and s websites at and respectively. A copy thereof will also be ed to all training providers on request. Finally, and PSIRA, in conjunction with the SAPS (NKP), are planning National Capacity Building Workshops for further interaction with regard to this communiqué. You are urged to forward any queries and questions which you might have concerning this communiqué on or before 6 June 2008 to the addresses below. Responses to the queries will be addressed at the capacity building workshops. SCHEDULED DATES AND VENUES FOR THE WORKSHOPS WILL BE CIRCULATED SOON. We trust that the aforementioned information has been and will be of assistance to you. 4

5 For any issues of clarity kindly contact the offices of or PSIRA on the contact details here below: PSIRA Call Centre Mr S. Badenhorst Telephone No. : Telephone No. : (012) Fax No. : (011) Fax No. : (012) callcentre@sasseta.org.za stefanb@psira.co.za Yours faithfully MR ZONGEZILE BALOYI CHIEF EXECUTIVE OFFICER MR NTUSI MBODLA ACTING CHIEF EXECUTIVE OFFICER PSIRA 5

PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR)

PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR) PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR) 1. INTRODUCTION 1.1 Purpose of the Guidelines These guidelines have been developed by TVETA to guide TVET Providers on how to: (i) Prepare, plan, and implement

More information

INSETA ETQA WORKSHOP ACCREDITATION

INSETA ETQA WORKSHOP ACCREDITATION INSETA ETQA WORKSHOP ACCREDITATION PURPOSE OF THE PRESENTATION To outline the accreditation requirements To clarify the providers roles and responsibilities in order to retain their accreditation status

More information

ASSESSOR REGISTRATION FORM

ASSESSOR REGISTRATION FORM ASSESSOR REGISTRATION FORM This registration form requires the following from the applicant: 1. Section 1 should be completed in full by the applicant; 2. Section 4 should be signed by the applicant, and

More information

QCTO CERT 002/15 QCTO Certification Policy Page 2 of 14

QCTO CERT 002/15 QCTO Certification Policy Page 2 of 14 1 April 2016 Policy for the certification of learner achievements for trades and occupational qualifications on the Occupational Qualifications Sub-Framework (OQSF) Document name: Policy for the certification

More information

CERTIFICATION POLICY

CERTIFICATION POLICY CERTIFICATION POLICY Table of contents 1. Background... 3 1.2 Definitions... 3 1.3 Application and Scope... 5 2. Statement of Policy Intent... 6 3. General requirement... 7 4. Issue of certificates...

More information

NATIONAL CERTIFICATE in Gunsmithing (Master) (Level 5)

NATIONAL CERTIFICATE in Gunsmithing (Master) (Level 5) NZQF NQ Ref 0347 Version 3 Page 1 of 10 NATIONAL CERTIFICATE in Gunsmithing (Master) (Level 5) Level 5 Credits 85 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

Further Education and Training Certificate: Technical Support (NQF Level 4) SAQA ID: 78964

Further Education and Training Certificate: Technical Support (NQF Level 4) SAQA ID: 78964 Further Education and Training Certificate: Technical Support (NQF Level 4) MICT Seta Accredited Qualification SAQA ID: 78964 1. Further Education and Training Certificate: Technical Support (NQF Level

More information

National Certificate in Beauty Services (Cosmetology) (Level 3)

National Certificate in Beauty Services (Cosmetology) (Level 3) NZQF NQ Ref 0631 Version 4 Page 1 of 7 National Certificate in Beauty Services (Cosmetology) (Level 3) Level 3 Credits 52 This qualification has been reviewed. The last date to meet the requirements is

More information

National Certificate in Specialist Rescue (Rope Instructor) (Level 4)

National Certificate in Specialist Rescue (Rope Instructor) (Level 4) NZQF NQ Ref 1200 Version 2 Page 1 of 7 National Certificate in Specialist Rescue (Rope Instructor) (Level 4) Level 4 Credits 85 This qualification has been reviewed. The last date to meet the requirements

More information

APPROVED BY: Next Review Date: 31 March QCTO CERT 002/18 QCTO Certification Policy Page 2 of 14

APPROVED BY: Next Review Date: 31 March QCTO CERT 002/18 QCTO Certification Policy Page 2 of 14 1 April 2018 Policy for the certification of learner achievements for trades and occupational qualifications on the Occupational Qualifications Sub-Framework (OQSF) APPROVED BY: Document name: Policy for

More information

National Certificate in Extractive Industries (Mining Administration B Grade Tunnel Manager) (Level 5) with an optional strand in Coal Mine Deputy

National Certificate in Extractive Industries (Mining Administration B Grade Tunnel Manager) (Level 5) with an optional strand in Coal Mine Deputy NZQF NQ Ref 1535 Version 4 Page 1 of 9 National Certificate in Extractive Industries (Mining Administration B Grade Tunnel Manager) (Level 5) with an optional strand in Coal Mine Deputy Level 5 Credits

More information

Skills Academy. Forensic Studies Courses

Skills Academy. Forensic Studies Courses Skills Academy Forensic Studies Courses www.skillsacademy.co.za Forensic Science Programmes Forensic Science Studies is for the person who wants to work in a laboratory or as a crime scene technician and

More information

External Assessment Specifications Document Curriculum. NQF Qualification Title Code

External Assessment Specifications Document Curriculum. NQF Qualification Title Code External Assessment Specifications Document Curriculum NQF Qualification Title Code Level 671101000 Occupational Certificate: Electrician 4 Name E-mail Phone Logo National Assessment Artisan Quality Moderation

More information

SCHOOL OF SAFETY and SECURITY Bachelor of Policing Practice (BPP): NQF Level 7 NQF Level 7 3Year

SCHOOL OF SAFETY and SECURITY Bachelor of Policing Practice (BPP): NQF Level 7 NQF Level 7 3Year Bachelor of Policing Practice (BPP): NQF Level 7 NQF Level 7 3Year Bachelor of Policing Practices The BPP degree is applicable to members of the SAPS, traffic- and metropolitan law enforcement. The Bachelor:

More information

National Certificate in Extractive Industries (Mining Administration Surface Extraction B Grade) (Level 5)

National Certificate in Extractive Industries (Mining Administration Surface Extraction B Grade) (Level 5) NZQF NQ Ref 1536 Version 2 Page 1 of 7 National Certificate in Extractive Industries (Mining Administration Surface Extraction B Grade) (Level 5) Level 5 Credits 80 This qualification has been reviewed.

More information

National Certificate in Specialist Rescue (Rope Technician) (Level 3)

National Certificate in Specialist Rescue (Rope Technician) (Level 3) NZQF NQ Ref 1198 Version 2 Page 1 of 6 National Certificate in Specialist Rescue (Rope Technician) (Level 3) Level 3 Credits 50 This qualification has been reviewed. The last date to meet the requirements

More information

OCCUPATIONAL HEALTH AND SAFETY ACT, 1993 (as amended) REGISTRATION AS A REGISTERED PERSON Revised January 2010

OCCUPATIONAL HEALTH AND SAFETY ACT, 1993 (as amended) REGISTRATION AS A REGISTERED PERSON Revised January 2010 OHS 3/1/5/7/9 OCCUPATIONAL HEALTH AND SAFETY ACT, 1993 (as amended) REGISTRATION AS A REGISTERED PERSON Revised January 2010 INTRODUCTION REGISTRATION CRITERIA This document outline the registration criteria

More information

NZQA registered unit standard 8086 version 7 Page 1 of 5. Demonstrate knowledge required for quality auditing

NZQA registered unit standard 8086 version 7 Page 1 of 5. Demonstrate knowledge required for quality auditing Page 1 of 5 Title Demonstrate knowledge required for quality auditing Level 4 Credits 4 Purpose People credited with this unit standard are able to demonstrate knowledge of: quality auditing, preparation

More information

National Certificate in Security (Communications) (Level 3)

National Certificate in Security (Communications) (Level 3) NZQF NQ Ref 0560 Version 4 Page 1 of 6 National Certificate in Security (Communications) (Level 3) Level 3 Credits 60 This qualification has been reviewed. It will be discontinued without replacement.

More information

QCTO Policy on Accreditation of Assessment Centres

QCTO Policy on Accreditation of Assessment Centres QCTO Policy on Accreditation of Assessment Centres Approved 20 February 2013 QCTO AAC-001/13 Policy on Accreditation of Assessment Centres Page 1 TABLE OF CONTENTS List of acronyms... 3 Glossary... 4 Preamble...

More information

REGISTRATION WITH DoL THIS INFORMATION IS MADE POSSIBLE BY:

REGISTRATION WITH DoL THIS INFORMATION IS MADE POSSIBLE BY: REGISTRATION WITH DoL THIS INFORMATION IS MADE POSSIBLE BY: http://www.installationrulesstudymate.co.za info@installationrulesstudymate.co.za The study material is a no nonsense guide for the Installation

More information

9 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF)

9 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF) 9 March 2016 Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF) Document name: Assessment Policy for Qualifications and Part qualifications

More information

During each cycle of three years every installer must accumulate CPD Points to qualify for designation renewal of his/her registration.

During each cycle of three years every installer must accumulate CPD Points to qualify for designation renewal of his/her registration. CPD POLICY The Flooring Industry Training Association has applied for official recognition by the South African Qualifications authority (SAQA) as the professional body for the flooring industry in South

More information

Qualification Manual. EAL Level 2 Certificate in Metals Industries Processes QUALIFICATION CODE: 500/7998/0 ISSUE: 2. Page 1 of 14

Qualification Manual. EAL Level 2 Certificate in Metals Industries Processes QUALIFICATION CODE: 500/7998/0 ISSUE: 2. Page 1 of 14 Qualification Manual EAL Level 2 Certificate in Metals Industries Processes QUALIFICATION CODE: 500/7998/0 ISSUE: 2 Page 1 of 14 Contents 1.0 About EAL... 3 2.0 Introduction to the Qualification... 4 3.0

More information

Please complete the Application Form to register as a constituent Assessor and/or Moderator and note the following criterion:

Please complete the Application Form to register as a constituent Assessor and/or Moderator and note the following criterion: APPLICATION FORM FOR CONSTITUENT ASSESSOR AND/OR MODERATOR REGISTRATION The SABPP LEARNING AND QUALITY ASSURANCE (LQA) is not levy funded as are other ETQAs and therefore has permission from SAQA to charge

More information

Qualification details

Qualification details Outcome Statement Qualification details Title New Zealand Certificate in Electricity Supply (Fault Response and Switching) (Level 4) with strands in Distribution Fault Response, Distribution Network Switching,

More information

National Certificate in Compliance and Regulatory Control (Local Government Enforcement) (Level 4) with an optional strand in Liquor Licensing

National Certificate in Compliance and Regulatory Control (Local Government Enforcement) (Level 4) with an optional strand in Liquor Licensing NZQF NQ Ref 1246 Version 2 Page 1 of 5 National Certificate in Compliance and Regulatory Control (Local Government Enforcement) (Level 4) with an optional strand in Liquor Licensing Level 4 Credits 61

More information

Advanced Manufacturing. and Engineering. Machining (Development Knowledge) Level 3 Diploma in. Qualification Specification

Advanced Manufacturing. and Engineering. Machining (Development Knowledge) Level 3 Diploma in. Qualification Specification Level 3 Diploma in Advanced Manufacturing Machining (Development Knowledge) and Engineering Qualification Specification Overview This qualification has been developed to provide learners with an advanced

More information

20 February Accreditation of Assessment Centres

20 February Accreditation of Assessment Centres 20 February 20 Accreditation of Assessment Centres Policy Name Accreditation of Assessment Centres Document number AAC-001/ Responsible Executive Chief Director: Occupational Qualifications Quality Assurance

More information

National Certificate in Border Management (Customs) (Level 3)

National Certificate in Border Management (Customs) (Level 3) NZQF NQ Ref 1591 Version 1 Page 1 of 5 National Certificate in Border Management (Customs) (Level 3) Level 3 Credits 65 Purpose This certificate is an entry level qualification for people working for the

More information

Vocational Qualifications (QCF, NVQ, NQF) ICT Professional Competence. OCR Report to Centres

Vocational Qualifications (QCF, NVQ, NQF) ICT Professional Competence. OCR Report to Centres Vocational Qualifications (QCF, NVQ, NQF) ICT Professional Competence Level 2 Diploma in ICT Professional Competence (PROCOM) 08737 Level 3 Diploma in ICT Professional Competence (PROCOM) 10262 Level 2

More information

Accreditation Application as Provider Tax Professional Occupational Qualification. SAQA ID: Learnership No. 01/Q010048/00/400/8

Accreditation Application as Provider Tax Professional Occupational Qualification. SAQA ID: Learnership No. 01/Q010048/00/400/8 Accreditation Application as Provider Tax Professional Occupational Qualification SAQA ID: 93624 Learnership No. 01/Q010048/00/400/8 Content 1. Introduction 2. Instructions 3. Type of Application 4. Administration

More information

National Certificate in Wood Manufacturing - Generic Skills (Tissue Converting) (Level 4)

National Certificate in Wood Manufacturing - Generic Skills (Tissue Converting) (Level 4) NZQF NQ Ref 0652 Version 7 Page 1 of 5 National Certificate in Wood Manufacturing - Generic Skills (Tissue Converting) (Level 4) Level 4 Credits 60 This qualification is expiring. The last date to meet

More information

National Certificate in Electricity Supply (Network Operator) (Level 4)

National Certificate in Electricity Supply (Network Operator) (Level 4) NZQF NQ Ref 0892 Version 4 Page 1 of 5 National Certificate in Electricity Supply (Network Operator) (Level 4) Level 4 Credits 88 This qualification has been reviewed. The last date to meet the requirements

More information

OPERATIONS SEAFARER CERTIFICATION STANDARD OF TRAINING & ASSESSMENT. Security Awareness STCW A-VI/6-1

OPERATIONS SEAFARER CERTIFICATION STANDARD OF TRAINING & ASSESSMENT. Security Awareness STCW A-VI/6-1 Document No. STA-06-601 Version No, Date 1.0 01/06/2018 Effective Date 01/07/2018 Compiled by Consultant, Senior Examiner Deck, QSS - Developer Approved by Chief Examiner Approval date 31/05/2018 OPERATIONS

More information

National Certificate in Engineering and Technology (Plastics Engineering) (Level 4)

National Certificate in Engineering and Technology (Plastics Engineering) (Level 4) NQF Ref 0478 Version 3 Page 1 of 6 National Certificate in Engineering and Technology (Plastics Engineering) (Level 4) Level 4 Credits 91 This qualification is expiring. The last date to meet the requirements

More information

National Certificate in Horticulture (Vegetable Production) (Level 4)

National Certificate in Horticulture (Vegetable Production) (Level 4) NQF Ref 0089 Version 6 Page 1 of 8 National Certificate in Horticulture (Vegetable Production) (Level 4) Level 4 Credits 133 This qualification is expiring. The last date to meet the requirements is 30

More information

National Diploma in Building Control Surveying (Medium and Large Buildings) (Level 6)

National Diploma in Building Control Surveying (Medium and Large Buildings) (Level 6) National Diploma in Building Control Surveying (Medium and Large Buildings) (Level 6) This qualification has been reviewed and replaced by the New Zealand Diploma in Building Surveying (Level 6) [Ref:

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2010.

This qualification is expiring. The last date to meet the requirements is 31 December 2010. NQF Ref 0025 Version 6 Page 1 of 6 National Certificate in Motor Industry (Vehicle Sales) Level 4 Credits 99 This qualification is expiring. The last date to meet the requirements is 31 December 2010.

More information

01 April Jonathan Goldberg / Samantha Long Global House 3 Pearce Street Berea East London

01 April Jonathan Goldberg / Samantha Long Global House 3 Pearce Street Berea East London 01 April 2016 Jonathan Goldberg / Samantha Long Global House 3 Pearce Street Berea East London Tel: 043 721 1030 / 083 281 9571 E-mail: johnny@iafrica.com / sdf@globalbusiness.co.za Dear Jonathan Goldberg

More information

National Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3

National Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3 NZQF NQ Ref 0568 Version 4 Page 1 of 9 National Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3 Credits 124 This qualification has been reviewed. The last date to meet the requirements

More information

NZQF NQ Ref 1220 Version 3 Page 1 of 8. This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

NZQF NQ Ref 1220 Version 3 Page 1 of 8. This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 1220 Version 3 Page 1 of 8 National Certificate in Mechanical Engineering (Level 2) Level 2 Credits 62 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Occupational Certificate: Dock Master. Name Phone Logo Transport Education Authority

National Occupational Certificate: Dock Master. Name  Phone Logo Transport Education Authority Curriculum Code 143907000 Assessment Quality Partner External Assessment Specifications Document Qualification Title NQF National Occupational Certificate: Dock Master 5 Name E-mail Phone Logo Transport

More information

NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4

NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4 NZQF NQ Ref 0662 Version 2 Page 1 of 16 NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4 Credits 265 This qualification has been reviewed. The

More information

Safely isolating and re-establishing electrical supplies

Safely isolating and re-establishing electrical supplies Safely isolating and re-establishing electrical supplies Course handbook Cert-ain Certification Ltd. Introduction Cert-ain Certification Ltd. is a certification body accredited by the regulatory authorities

More information

2018 IFE Qualifications - Frequently Asked Questions (FAQs)

2018 IFE Qualifications - Frequently Asked Questions (FAQs) 2018 IFE Qualifications - Frequently Asked Questions (FAQs) IFE Qualification Content Q: How can I find out about IFE qualifications? A: Information about all qualifications (including links to the relevant

More information

National Certificate in Electrical Engineering (Electrician for Registration) (Level 4)

National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) NZQF NQ Ref 1195 Version 3 Page 1 of 11 National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) Level 4 Credits 249 This qualification has been revised. The last date to

More information

National Diploma in Building Control Surveying (Small Buildings) (Level 5)

National Diploma in Building Control Surveying (Small Buildings) (Level 5) National Diploma in Building Control Surveying (Small Buildings) (Level 5) This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. This qualification has been

More information

New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4

New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4 New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4 This qualification is designed for people who work in frontline roles that deal with the operational aspects of regulatory

More information

National Diploma in Aeronautical Engineering (Maintenance Planning)

National Diploma in Aeronautical Engineering (Maintenance Planning) NZQF NQ Ref 1258 Version 2 Page 1 of 5 National Diploma in Aeronautical (Maintenance Planning) Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

More information

19 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF)

19 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF) 19 March 2014 Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF) Table of Contents List of Acronyms... 3 Glossary of terms... 4 1. Preamble...

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2011.

This qualification is expiring. The last date to meet the requirements is 31 December 2011. NQF Ref 0290 Version 6 Page 1 of 5 National Certificate in Funeral Directing Level 5 Credits 155 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose The

More information

Qualification details

Qualification details Qualification details Title New Zealand Certificate in Blasting (Level 4) with strands in Land Operations, Surface (Quarry or Open-cast), Underground (Tunnelling or Metalliferous), Underground Coal, and

More information

Essential Skills Qualifications Criteria Communication and Application of Number

Essential Skills Qualifications Criteria Communication and Application of Number Essential Skills Qualifications Criteria Communication and Application of Number 2 Contents The criteria... 3 Introduction... 3 Essential Skills Content... 3 Titling... 3 Subject matter of Essential Skills...

More information

IMI Level 3 Award in Automotive Refrigerant Handling (EC ) I.D NO: 500/6771/0

IMI Level 3 Award in Automotive Refrigerant Handling (EC ) I.D NO: 500/6771/0 QUALIFICATION SPECIFICATION PART A: ASSESSOR AND QUALITY ASSURER GUIDANCE IMI QUALIFICATION IMI Level 3 Award in Automotive Refrigerant Handling (EC842-2006) I.D NO: 500/6771/0 Note: This guidance document

More information

National Certificate in Civil Defence (Response) (Level 3)

National Certificate in Civil Defence (Response) (Level 3) NZQF NQ Ref 0327 Version 5 Page 1 of 9 National Certificate in Civil Defence (Response) (Level 3) Level 3 Credits 52 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

Continuing Professional Development Verification and Recognition Policy

Continuing Professional Development Verification and Recognition Policy Continuing Professional Development Verification and Recognition Policy Summary of Policy The London Institute of Banking & Finance issues Statements of Professional Standing (SPS) to financial advisers

More information

This qualification is expiring. The last date to meet the requirements is 31 March 2019.

This qualification is expiring. The last date to meet the requirements is 31 March 2019. NZQF NQ Ref 0356 Version 6 Page 1 of 7 National Diploma in Construction Management (Level 6) Level 6 Credits 245 This qualification is expiring. The last date to meet the requirements is 31 March 2019.

More information

Introduction to Learning Leading Towards Licence-linked Qualifications. Requirements for Awarding Organisations/Bodies and Training Providers

Introduction to Learning Leading Towards Licence-linked Qualifications. Requirements for Awarding Organisations/Bodies and Training Providers Introduction to Learning Leading Towards Licence-linked Qualifications Requirements for Awarding Organisations/Bodies and Training Providers January 2018 Contents Introduction 1 Implications arising from

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 0256 Version 6 Page 1 of 9 National Certificate in Urban Pest Management with optional strands in Fumigation, Vertebrate Pests, Wood Borer, Shooting, Bird Control, Textile Pests, Bedbug Control,

More information

Create a website for a stakeholder using a dedicated web-authoring tool

Create a website for a stakeholder using a dedicated web-authoring tool Page 1 of 5 Create a website for a stakeholder using a dedicated web-authoring tool Level 3 Credits 5 Purpose People credited with this unit standard are able to: plan design a website for a stakeholder;

More information

This qualification is expiring. The last date to meet the requirements is 31 March 2019.

This qualification is expiring. The last date to meet the requirements is 31 March 2019. NZQF NQ Ref 0357 Version 6 Page 1 of 8 National Diploma in Architectural Technology (Level 6) Level 6 Credits 275 This qualification is expiring. The last date to meet the requirements is 31 March 2019.

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2017.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2017. NZQF NQ Ref 0724 Version 4 Page 1 of 11 National Diploma in Tourism Conventions and Incentives (Level 5) with strands in Conference Organisation, Convention Bureaux, Incentives Planning, and Venue Sales

More information

QCTO Certification Policy

QCTO Certification Policy QCTO Certification Policy Approved 20 February 2013 QCTO CERT 001/13 QCTO Certification Policy Page 1 TABLE OF CONTENTS List of acronyms... 3 Glossary... 4 Preamble... 6 1. Purpose... 6 2. Legislative

More information

Youth can begin apprenticeship in high school through Secondary School Apprenticeship (SSA) programs.

Youth can begin apprenticeship in high school through Secondary School Apprenticeship (SSA) programs. LOCKSMITH Occupation Description means a person who repairs, services and/or installs all types of keys, locks, access/egress control systems (mechanical or electrical), and builders of hardware in accordance

More information

NZQF NQ Ref 0227 Version 8 Page 1 of 8

NZQF NQ Ref 0227 Version 8 Page 1 of 8 NZQF NQ Ref 0227 Version 8 Page 1 of 8 National Certificate in Security with strands in Court Security, Event Security, Mobile Patrol, Noise Control, Retail Security, Secure Transport, Site Security, and

More information

NGINEERING ANUFACTURE

NGINEERING ANUFACTURE NGINEERING ANUFACTURE Level 1 Diploma in ENGINEERING and MANUFACTURE Qualification Specification Overview This qualification has been developed predominantly for young people in full time education who

More information

NGINEERING ECHNOLOGY. ENGINEERING and TECHNOLOGY. Level 2 Diploma in. Qualification Specification. Issue 1.0. Overview

NGINEERING ECHNOLOGY. ENGINEERING and TECHNOLOGY. Level 2 Diploma in. Qualification Specification. Issue 1.0. Overview NGINEERING ECHNOLOGY Level 2 Diploma in ENGINEERING and TECHNOLOGY Qualification Specification Overview This qualification has been developed to provide learners with an intermediate knowledge and understanding

More information

ROLE DESCRIPTION IT SPECIALIST

ROLE DESCRIPTION IT SPECIALIST ROLE DESCRIPTION IT SPECIALIST JOB IDENTIFICATION Job Title: Job Grade: Department: Location Reporting Line (This structure reports to?) Full-time/Part-time/Contract: IT Specialist D1 Finance INSETA Head

More information

NZQF NQ Ref 1545 Version 2 Page 1 of 13

NZQF NQ Ref 1545 Version 2 Page 1 of 13 NZQF NQ Ref 1545 Version 2 Page 1 of 13 National Certificate in (Level 5) with strands in Engineering Fabrication, Fire Protection, General and Maintenance Engineering, Mechanical Services, and Precision

More information

National Certificate in Horticulture (Floriculture) (Level 4)

National Certificate in Horticulture (Floriculture) (Level 4) NQF Ref 0087 Version 5 Page 1 of 8 National Certificate in Horticulture (Floriculture) (Level 4) Level 4 Credits 141 This qualification is expiring. The last date to meet the requirements is 30 June 2009.

More information

National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand

National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand This qualification has been reviewed and replaced by the New Zealand Certificate in Contact

More information

National Certificate in Civil Defence (Response) (Level 2)

National Certificate in Civil Defence (Response) (Level 2) NZQF NQ Ref 1447 Version 2 Page 1 of 5 National Certificate in Civil Defence (Response) (Level 2) Level 2 Credits 46 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Split System Air Conditioning (Level 3)

National Certificate in Split System Air Conditioning (Level 3) NZQF NQ Ref 1242 Version 3 Page 1 of 6 National Certificate in Split System Air Conditioning (Level 3) Level 3 Credits 53 This qualification has been reviewed. The last date to meet the requirements is

More information

Provider Monitoring Report. City and Guilds

Provider Monitoring Report. City and Guilds Provider Monitoring Report City and Guilds 22 May 2017 to 3 August 2017 Contents 1 Background 1 1.1 Scope 1 1.2 Provider Monitoring Report Timeline 2 1.3 Summary of Provider Monitoring Issues and Recommendations

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2013.

This qualification is expiring. The last date to meet the requirements is 31 December 2013. NZQF NQ Ref 0640 Version 2 Page 1 of 5 National Certificate in Design (Draughting) (Level 2) Level 2 Credits 70 This qualification is expiring. The last date to meet the requirements is 31 December 2013.

More information

National Certificate in Pharmaceutical and Allied Products Manufacturing (Level 1)

National Certificate in Pharmaceutical and Allied Products Manufacturing (Level 1) NQF Ref 1233 Version 1 Page 1 of 5 National Certificate in Pharmaceutical and Allied Products Manufacturing (Level 1) Level 1 Credits 40 Purpose The National Certificate in Pharmaceutical and Allied Products

More information

Graduates of this qualification will have the minimum qualification to enter the security industry as staff security personnel.

Graduates of this qualification will have the minimum qualification to enter the security industry as staff security personnel. National Certificate in Security (Level 2) This course will teach your staff the basics of working in security. They ll learn about the law, risk management, dealing with emergency situations, conflict

More information

Qualification Specification. Level 2 Award in Problem Solving for Practitioners In Community Safety and Crime Prevention

Qualification Specification. Level 2 Award in Problem Solving for Practitioners In Community Safety and Crime Prevention Qualification Specification Level 2 Award in Problem Solving for Practitioners In Community Safety and Crime Prevention ProQual 2019 Contents Page Introduction 3 Qualification structure 4 Centre requirements

More information

POLICY FOR THE RE-ISSUE OF NATIONAL CERTIFICATES

POLICY FOR THE RE-ISSUE OF NATIONAL CERTIFICATES POLICY FOR THE RE-ISSUE OF NATIONAL CERTIFICATES Umalusi Umalusi House 37 General van Ryneveld Street Persequor Technopark Pretoria PO Box 151 Persequor Technopark Pretoria 0020 South Africa Tel: +27 12

More information

National Certificate in Demolition (Site Supervisor) (Level 4)

National Certificate in Demolition (Site Supervisor) (Level 4) NQF Ref 1087 Version 2 Page 1 of 6 National Certificate in Demolition (Site Supervisor) (Level 4) Level 4 Credits 137 Purpose This National Certificate recognises the skills and knowledge of an experienced

More information

National Certificate in Electricity Supply (Hydro Operator) (Level 4)

National Certificate in Electricity Supply (Hydro Operator) (Level 4) NZQF NQ Ref 1405 Version 3 Page 1 of 6 National Certificate in Electricity Supply (Hydro Operator) (Level 4) Level 4 Credits 77 This qualification has been reviewed. The last date to meet the requirements

More information

NEBOSH Part A accreditation criteria

NEBOSH Part A accreditation criteria NEBOSH Part A accreditation criteria 1. The course provider must provide the following contact details for the five roles defined below: a) NEBOSH Communications Coordinator: The person to whom all correspondence

More information

JEAS-Accredited Environmental Assessor Qualification Scheme

JEAS-Accredited Environmental Assessor Qualification Scheme JEAS-Accredited Environmental Assessor Qualification Scheme Osamu Kajitani, President Japan Association of Environment Assessment (JEAS) Abstract The Japan Association of Environment Assessment (JEAS)

More information

National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5)

National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5) NQF Ref 0718 Version 2 Page 1 of 10 National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5) Level 5 Credits 110 This qualification is expiring. The last date to meet the

More information

Qualification details

Qualification details Qualification details Title New Zealand Certificate in Refrigeration and Air Conditioning (Trade Assistant) (Level 3) Version 1 Qualification type Certificate Level 3 Credits 120 NZSCED 031315 Engineering

More information

Advanced Manufacturing. and Engineering. Machining (Foundation Knowledge) Level 2 Diploma in. Qualification Specification

Advanced Manufacturing. and Engineering. Machining (Foundation Knowledge) Level 2 Diploma in. Qualification Specification Level 2 Diploma in Advanced Manufacturing Machining (Foundation Knowledge) and Engineering Qualification Specification Overview This qualification has been developed to provide learners with an intermediate

More information

National Certificate in Public Sector Services (Induction) (Level 3)

National Certificate in Public Sector Services (Induction) (Level 3) National Certificate in Public Sector Services (Induction) (Level 3) An induction programme that covers the key skills, knowledge and competencies that underpin New Zealand s public sector, this training

More information

National Certificate in Industrial Rope Access (Working on Ropes) (Level 4)

National Certificate in Industrial Rope Access (Working on Ropes) (Level 4) NZQF NQ Ref 1017 Version 3 Page 1 of 5 National Certificate in Industrial Rope Access (Working on Ropes) () Credits 118 This qualification has been reviewed. The last date to meet the requirements is 31

More information

National Certificate in Printing (Digital Processes for Print) (Level 3)

National Certificate in Printing (Digital Processes for Print) (Level 3) NZQF NQ Ref 1280 Version 3 Page 1 of 5 National Certificate in Printing (Digital Processes for Print) (Level 3) Level 3 Credits 102 This qualification is expiring. The last date to meet the requirements

More information

National Certificate in Hospitality (Introductory Cookery) (Level 2)

National Certificate in Hospitality (Introductory Cookery) (Level 2) NZQF NQ Ref 0552 Version 6 Page 1 of 7 National Certificate in Hospitality (Introductory Cookery) (Level 2) Level 2 Credits 45 This qualification has been reviewed. The last date to meet the requirements

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2010.

This qualification is expiring. The last date to meet the requirements is 31 December 2010. NQF Ref 0881 Version 2 Page 1 of 12 National Diploma in Civil Engineering Level 6 Credits 410 This qualification is expiring. The last date to meet the requirements is 31 December 2010. Purpose The National

More information

National Certificate in Industrial Rope Access (Elementary Rope Skills) (Level 3)

National Certificate in Industrial Rope Access (Elementary Rope Skills) (Level 3) NZQF NQ Ref 1016 Version 4 Page 1 of 7 National Certificate in Industrial Rope Access (Elementary Rope Skills) (Level 3) Level 3 Credits 73 This qualification has been reviewed. The last date to meet the

More information

Advanced Manufacturing. and Engineering. Safe Working Practice in the Wind Turbine Industry. Level 2 Diploma in. Qualification Specification

Advanced Manufacturing. and Engineering. Safe Working Practice in the Wind Turbine Industry. Level 2 Diploma in. Qualification Specification Level 2 Diploma in Advanced Manufacturing Safe Working Practice in the Wind Turbine Industry and Engineering Qualification Specification Overview The EAL Level 2 Diploma in Safe Working Practice in the

More information

- OQSF - Occupational Qualifications Sub-framework

- OQSF - Occupational Qualifications Sub-framework All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is

More information

The strands allow people to specialise in their particular area of work and interest.

The strands allow people to specialise in their particular area of work and interest. NQF Ref 0952 Version 2 Page 1 of 7 National Certificate in Biosecurity (Border Quarantine) with strands in International Cargo Clearance, International Vessel Clearance, International Aircraft Clearance,

More information

Client Services Procedure Manual

Client Services Procedure Manual Procedure: 85.00 Subject: Administration and Promotion of the Health and Safety Learning Series The Health and Safety Learning Series is a program designed and delivered by staff at WorkplaceNL to increase

More information

ACCOUNTING PROGRAMME NATIONAL DIPLOMA IN FINANCIAL ACCOUNTING

ACCOUNTING PROGRAMME NATIONAL DIPLOMA IN FINANCIAL ACCOUNTING CAPE TOWN CAMPUS: Tel: (021) 673-9100 Fax: (021) 673-9111 2 nd Floor, Sunclare Building, Corner Dreyer & Protea Roads, Claremont JOHANNESBURG CAMPUS: Tel: (011) 718-4000 Fax: (011) 718-4001 Corner Main

More information

NATIONAL CERTIFICATE in 1 of 13

NATIONAL CERTIFICATE in 1 of 13 NATIONAL CERTIFICATE in 1 of 13 level of qualification: 2 credit total: 76 Core Compulsory Core Elective Wiredrawing Strand level 1 credits: 20 0-8 6 level 2 or above credits 14 0-23 13 minimum totals:

More information

Recognition of professional bodies and registration of professional designations

Recognition of professional bodies and registration of professional designations Recognition of professional bodies and registration of professional designations INAUGURAL SUMMIT FOR THE PROFESSIONALISATION OF COMMUNITY DEVEVELOPMENT October 2011 Jody P. Cedras Overview Something about

More information