National Certificate in Printing (Printing Screen) (Level 3) with strands in Flat Sheet, Fabric (Panel) and Formed Shapes Level 3

Transcription

1 NZQF NQ Ref 0665 Version 4 Page 1 of 6 National Certificate in Printing (Printing Screen) (Level 3) with strands in Flat Sheet, Fabric (Panel) and Formed Shapes Level 3 Credits This qualification is expiring. The last date to meet the requirements is 31 December Version 4 of this qualification has been republished to extend the last date of enrolment on programmes from 31 December 2013 to 31 December 2016, also to extend the last date for assessment from 31 December 2015 to 31 December Transition Arrangements This qualification has been replaced by the New Zealand Certificate in Print (Level 3) [Ref: 1822]. The last date for entry into programmes leading to the replaced qualification is 31 December People currently working towards this replaced qualification must complete the requirements by December For detailed information see Review Summaries on the NZQA website. NZQF National Qualification Registration Information Process Version Date Last Date for Assessment Registration 1 October 1999 December 2007 Revision 2 January 2004 December 2007 Review 3 May 2005 December 2018 Republished 3 April 2013 December 2018 Review 4 January 2014 December 2018 Republished 4 November 2015 December 2018 It is the intention of that no existing trainee should be disadvantaged by these transition arrangements. Any person who considers they have been disadvantaged may appeal to using the contact details below. Standard Setting Body PO Box 9005 Newmarket Auckland 1149 Telephone qualifications@competenz.org.nz

2 NZQF NQ Ref 0665 Version 4 Page 2 of 6 National Certificate in Printing (Printing Screen) (Level 3) with strands in Flat Sheet, Fabric (Panel) and Formed Shapes Level 3 Credits Purpose This national certificate is designed for trainees who are employed in the screen printing sector of the printing industry, and who are undertaking either a limited training programme or an apprenticeship training programme. Strands are included in this qualification to recognise specialist knowledge and skills required for the different screen printing processes of flat sheet, fabric (panel) or formed shapes. Holders of this certificate have been credited with the compulsory unit standards and have met the requirements of the core electives and one of the strands. Those who have achieved the above requirements are able to make stencils for screen printing, and make ready and print, multicolour (not process) for flat sheet, fabric (panel), or formed shapes production, to specifications and standards as set by industry. Trainees may have previously completed the National Certificate in Printing (Production Support) (Level 2) with strands in Carton Cut and Crease, Carton Forme Making, Finishing (Carton), Sheet-fed Offset, Reel-fed Printing, Screen Printing, and Formed Shapes (Letterpress/Dry Offset) [Ref: 0593]. People who have completed the Screen Printing strand of that qualification will have achieved credit for unit standards required in the core compulsory and core elective sections of this qualification. Replacement Information This qualification has been reviewed and replaced by the New Zealand Certificate in Print (Level 3) [Ref: 1822]. This qualification replaced the National Certificate in Printing (Printing Screen: Fabric Panel) (Level 3) [Ref: 0132], the National Certificate in Printing (Printing Screen: Flat Sheet) (Level 3) [Ref: 0133], and the National Certificate in Printing (Printing Screen: Formed Shapes) (Level 3) [Ref: 0134].

3 NZQF NQ Ref 0665 Version 4 Page 3 of 6 Credit Range Core Compulsory Core Elective Level 2 credits Level 3 credits Minimum totals Flat Sheet Strand Fabric (Panel) Strand Formed Shapes Strand Level 3 credits Minimum totals Requirements for Award of Qualification This qualification will be awarded to people who are credited with the compulsory unit standards and who have met the requirements of the core electives and one of the strands. Award of NZQF National Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website: Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. Summary of Requirements Compulsory standards Core Elective 1 one of the standards from the set Core Elective 2 one of the standards from the set And one of the following strands: Flat Sheet strand all of the standards listed in the set Fabric (Panel) Strand all of the standards listed in the set Formed Shapes Strand all of the standards listed in the set Detailed Requirements Compulsory The following standards are required Wash up for screen printing 2 4

4 NZQF NQ Ref 0665 Version 4 Page 4 of Prepare, handle and store substrates required for screen 3 8 printing Demonstrate industry knowledge for screen printing 3 12 Manufacturing > Printing > Printing Production 340 Demonstrate knowledge of safe working practices in the 2 5 printing and graphic pre-press industries 341 Carry out routine and preventive maintenance common to the 3 10 printing industry 2281 Demonstrate knowledge of the printing and graphic pre-press 2 7 industries Demonstrate understanding of trade calculations for printing 2 5 Core Elective 1 One of the standards listed below is required Reclaim screens using a pressure gun for screen printing Reclaim screens using an automatic machine, and maintain cleaning equipment for screen printing Core Elective 2 One of the standards listed below is required Produce screens, and make stencils using the capillary 3 12 system, for screen printing 5136 Produce screens, and make stencils using the direct emulsion 3 12 system, for screen printing 5137 Produce screens, and make stencils using the indirect system, for screen printing 3 12 Flat Sheet Strand All the standards listed below are required Make ready and print single colour for flat sheet screen printing Make ready and print multi colour (not process) for flat sheet screen printing 3 25

5 NZQF NQ Ref 0665 Version 4 Page 5 of 6 Fabric (Panel) Strand All the standards listed below are required Make ready and print single colour for fabric (panel) screen 3 40 printing 5141 Make ready and print multi colour (not process) for fabric (panel) screen printing 3 25 Formed Shapes Strand All the standards listed below are required Make ready and print single colour for formed shapes screen 3 40 printing 5143 Make ready and print multi colour (not process) for formed shapes screen printing 3 25 Transition Arrangements Version 3 Version 3 was republished in April 2013 to indicate that this qualification has been reviewed and replaced. Version 3 was reviewed and issued to take account of changes resulting from the review of the Printing Screen unit standards. Changes to structure and content unit standard 5128 was removed unit standard 5127 was replaced with new unit standard unit standard 2281 was added title of unit standard changed credit totals increased from to This qualification contains standards that replace earlier standards. For the purposes of this qualification people who have gained credit for the expiring standards are exempt from the requirement to gain credit for the replacement standards see exemption table below. Credit for Exempt from 5132, 5133, All trainees enrolled in programmes leading to this National qualification will be supported to complete it.

6 NZQF NQ Ref 0665 Version 4 Page 6 of 6 will advise all employers currently involved in training programmes of the changes. Previous versions of the qualification Version 2 This qualification was revised and issued as version 2 in January 2004 to take account of changes resulting from the review of the core Printing Production unit standards. Changes included: new unit standard included in the core compulsory section, and credit totals increased from to Version 1 replaced the National Certificate in Printing (Printing Screen: Flat Sheet) (Level 3) [Ref: 0133], the National Certificate in Printing (Printing Screen: Fabric (Panel)) (Level 3) [Ref: 0132] and the National Certificate in Printing Screen (Formed Shapes) (Level 3) [Ref: 0134]. The last date for award of replaced qualifications is December In addition to the qualifications being combined, following the review of Printing unit standards the domain for unit standard 340 changed from Printing Graphic Pre-press to Printing Production. Certification This certificate will display the logos of NZQA, and the organisation that has been granted consent to assess against standards that meet the requirements of the qualification (accredited). Classification This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 191 Manufacturing > Printing Engineering and Related Technologies > Manufacturing, Engineering and Technology > Printing Quality Management Systems Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. Organisation with consent to assess and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Consent to assess requirements and the moderation system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.