NetApp NS0-156_formatted

Transcription

1 NetApp NS0-156_formatted Number: Passing Score: 800 Time Limit: 120 min File Version: NetApp NS0-156 Data ONTAP Cluster-Mode Administrator Version: 6.1

2 Exam A QUESTION 1 Which statement is true about a Data Protection (DP)-type SnapMirror destination volume? A. It can be in a Data ONTAP GX cluster. B. It must be on the same disk type as the source volume. C. It can be smaller than the source volume. D. It can be on a different disk type than the source volume. Correct Answer: D QUESTION 2 To operate Data ONTAP 8.1 Cluster-Mode SAN, what must be configured on both the initiator and target? A. Logical Unit Access Initialization B. Physical Unit Access Initialization C. Symmetric Logical Unit Access D. Asymmetric Logical Unit Access E. SAN Access Initialization Protocol Correct Answer: D QUESTION 3 Which command can be used to identify the target iqn name in Data ONTAP 8.1 Cluster-Mode and later? A. cluster iscsi name B. cluster iscsi nodename C. cluster iscsi show D. vserver iscsi nodename E. vserver iscsi name F. vserver iscsi show Correct Answer: F QUESTION 4 What does Storage Failover allow? A. disks to fail over between HA partners B. disks to fail over to a plex

3 C. disks to fail over to any node in a cluster D. disks to fail over to the Epsilon node Correct Answer: A QUESTION 5 Which five protocols are supported by Data ONTAP 8.1 Cluster-Mode? (Choose five.) A. CIFS B. FC C. FCIP D. FCoE E. ifcp F. iscsi G. NFS Correct Answer: ABDFG QUESTION 6 Which two methods expose volumes to NAS clients? (Choose two.) A. mount directories of a volume in a namespace B. mount the required namespaces in a volume C. mount the required namespaces in an aggregate D. mount the required volumes in a namespace Correct Answer: AD QUESTION 7 Which storage system combination is supported in Cluster-Mode? A. a pair of FAS3270s and a pair of FAS3020s

4 B. a pair of FAS3270s with a FAS3240 and a FAS6240 C. a pair of FAS6280s and a pair of E7900s D. a pair of FAS6280s and a pair of FAS3240s Correct Answer: D QUESTION 8 Which two statements are true in a SnapMirror LS mirror relationship? (Choose two.) A. Client requests to write data are allowed if the user is root. B. Client requests to write data are denied unless accessing the admin share. C. Client requests to read data are only allowed if the mirror is up-to-date. D. Client requests to read data are redirected to the LS mirror destination volumes. Correct Answer: BD QUESTION 9 Which two SMB versions does Data ONTAP Cluster-Mode support? (Choose two.) A. SMB 1.0 B. SMB 2.0 C. SMB 3.0 D. SMB 4.0 Correct Answer: AB QUESTION 10 How does the NetApp Remote Support Agent (RSA) connect to NetApp Support? A. NetApp Support initiates a secure connection to the RSA. B. NetApp Support initiates a non-secure connection to the RSA. C. The RSA initiates a secure connection to NetApp Support. D. The RSA initiates a non-secure connection to NetApp Support. Correct Answer: C

5 QUESTION 11 The VLDB is out-of-quorum on the node serving as the master of the VLDB ring. Which four statements are true? (Choose four.) A. A new VLDB ring master is elected. B. Clients can write to volumes on that node. C. Volumes cannot be moved to or from that node. D. Clients can read from volumes hosted on that node. E. New volumes can be created on aggregates hosted on that node. Correct Answer: ABCD QUESTION 12 With Data ONTAP 8.1, which statement is true about deduplication and volume sizes? A. Deduplication is limited to 16TB. B. Deduplication is limited to 32TB. C. Deduplication is supported up to half the maximum volume size for the platform. D. Deduplication is supported up to the maximum volume size for the platform. Correct Answer: D QUESTION 13 Which three NFS versions does Data ONTAP 8.1 Cluster-Mode support? (Choose three.) A. NFSv.0 B. NFSv.1 C. NFSv1.1 D. NFSv3.0 E. NFSv4.0 F. NFSv4.1 G. NFSv5.0 Correct Answer: DEF QUESTION 14 What kind of structure can be deduplicated? A. A disk

6 B. An aggregate C. A FlexVol D. A qtree Correct Answer: C QUESTION 15 Which parameter must the cluster administrator properly define when configuring an iscsi logical interface in Data ONTAP 8.1 Cluster-Mode and later? A. data-access B. data-address C. data-protocol D. data-routing E. No parameter needs to be defined as no additional parameter is required. Correct Answer: C QUESTION 16 Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.) A. cluster LIF B. data LIF of protocol CIFS C. data LIF of protocol FCoE D. data LIF of protocol iscsi E. data LIF of protocol NFS F. intercluster LIF G. node management LIF Correct Answer: BE QUESTION 17 Where can NDMP backups be performed? A. within the Vserver context B. on the OnCommand server C. from any node in the cluster D. from the node that owns the volume

7 Correct Answer: D QUESTION 18 Which four statements are true about a node's vol0 volume? (Choose four.) A. It cannot be moved with the volume move command. B. It contains RDB databases and log files. C. It is the most efficient place to store critical user data. D. It is not part of the namespace. E. One exists on every node in the cluster. Correct Answer: ABDE QUESTION 19 Protocol access is provided to data via what? A. a cluster B. a virtual filer C. a virtual server D. a high-available pair of storage systems Correct Answer: C QUESTION 20 What is the maximum number of nodes a SAN cluster in DOT 8.1 can have? A. 1 B. 2 C. 6 D. 8 E. 16 F. 24 G. 32 Correct Answer: C

8 QUESTION 21 Which two Data ONTAP Cluster-Mode clone technologies will lock a Snapshot copy? (Choose two.) A. FlexClone B. LUN Clone C. Snap Clone D. Vol Clone E. Aggr Clone Correct Answer: AB QUESTION 22 NetApp Remote Support Agent (RSA) is supported on which two FAS module types? (Choose two.) A. BMC B. ILO C. RLM D. RTC E. SP Correct Answer: CE QUESTION 23 Which resource is associated with all logical interfaces? A. cluster B. cluster-routes C. group-routes D. port E. VServer-routes Correct Answer: D QUESTION 24 What are four characteristics of a NAS LIF? (Choose four.) A. It has a logical interface connection. B. It can be associated with a Fibre Channel port.

9 C. It can be associated with a WWPN. D. It can be associated with an Ethernet port. E. It can be associated with an interface group (ifgrp). F. It can be associated with an IP address. Correct Answer: ADEF QUESTION 25 What is the GUI-based interface that manages a cluster? A. Cluster Bench B. Device Manager C. FilerView D. Node Studio E. System Manager Correct Answer: E QUESTION 26 Which statement is true about establishing a SnapMirror relationship? A. It sets up the relationship on the source node only. B. It sets up the relationship and starts the initial data transfer. C. It sets up the relationship and creates the destination volume. D. It sets up the relationship, but does not start the initial transfer. Correct Answer: D QUESTION 27 What must be defined in order to create an NFS export within Cluster-Mode? A. an entry in the /etc/exports file B. an export policy and rules under a Vserver C. an export policy and rules under the FreeBSD shell D. an export policy and rules under the node shell E. export rules that are associated with a LIF Correct Answer: B

10 QUESTION 28 Which two switches are supported cluster switches? (Choose two.) A. Brocade 8000 B. Brocade FLS624 C. Cisco Nexus 5010 D. Cisco Nexus 5020 E. Cisco Catalyst 2960 Correct Answer: CD QUESTION 29 What are four storage efficiency features Data ONTAP 8.1 Cluster-Mode provides? (Choose four.) A. compression B. deduplication C. FlexClone D. SnapVault E. thin provisioning F. transparent files Correct Answer: ABCE QUESTION 30 Which three storage features can be scaled by storage administrators? (Choose three.) A. capacity scaling, by allowing more than two storage systems to be combined with larger disk shelves B. energy scaling, by allowing the cluster to share the same power source C. heterogeneous scaling, by allowing E-Series and FAS-Series systems within a single cluster D. network scaling, by providing three or more network switches for the cluster network E. operational scaling, by allowing the entire cluster to be administrated through a single resilient interface F. performance scaling, by using Flash Cache, SSDs, and Quality of Service Correct Answer: AEF

11 QUESTION 31 Which type of LIF allows replication between two clusters? A. cluster B. cluster-mgmt C. data D. intercluster E. node-mgmt Correct Answer: D QUESTION 32 One node of a 2-node cluster is shut down to replace a NIC. All RDB rings fall out of quorum. To diagnose the problem, what should the administrator do first? A. disconnect and reconnect the InfiniBand cable B. issue storage failover show from the clustershell C. issue cluster ha show from the clustershell D. verify that the cluster switch is functioning properly Correct Answer: C QUESTION 33 Which is a supported management switch? A. Brocade 8000 B. Brocade FLS624 C. Cisco Nexus 5010 D. Cisco Nexus 7000 E. Cisco Catalyst 2960 F. Cisco Nexus 5020 Correct Answer: E QUESTION 34 Which statement is true about a SnapMirror destination Vserver? A. It must have a read-only Vserver root volume. B. It must be in the same cluster as the source Vserver.

12 C. It must be created with the same language type as the source Vserver. D. It must have a different storage efficiency policy than the source Vserver. Correct Answer: C QUESTION 35 NFSv4.1 pnfs reduces traffic over which network? A. cluster network B. data network C. InfiniBand network D. management network Correct Answer: A QUESTION 36 Using the following path: /users/sales/a1/smith, which are the two possible path types for a1? (Choose two.) A. a directory B. a file C. a LUN D. a qtree Correct Answer: AD QUESTION 37 Which command configures the Remote Support Agent (RSA)? A. rsa init B. system services web C. system services rsa D. vserver services rsa Correct Answer: B

13 QUESTION 38 Which statement is true about expanding an aggregate from 32-bit to 64-bit in place? A. The expansion is triggered by an aggr convert command. B. The expansion is triggered by adding disks to exceed 16TB. C. All aggregates are automatically converted from 32-bit to 64-bit with the Data ONTAP 8.1 upgrade. D. 32-bit aggregates are degraded and must be Volume SnapMirrored to new 64-bit aggregates with the Data ONTAP 8.1 upgrade. Correct Answer: B QUESTION 39 What should an administrator do first before shutting down two nodes of a 4-node cluster? A. migrate node-management LIFs to a node that is staying up B. move Vserver root volumes to a node that is staying up C. reassign the master of all RDB rings to a node that is staying up D. set both nodes that are coming down to "ineligible" Correct Answer: D QUESTION 40 Which two Data ONTAP Cluster-Mode clone technology can clone an individual LUN inside a volume without cloning the entire volume? A. FlexClone B. LUN Clone C. Snap Clone D. Vol Clone E. Aggr Clone Correct Answer: BD QUESTION 41 What are two ways a storage administrator can improve the operational availability of NAS application data? (Choose two.) A. by backing up data to a USB disk B. by configuring ALUA on the host C. by providing multiple data logical interfaces

14 D. by utilizing the volume move feature Correct Answer: CD QUESTION 42 Which four features does Cluster-Mode support? (Choose four.) A. data protection mirrors B. load-sharing mirrors C. NDMP tape backup D. non-disruptive upgrades E. synchronous SnapMirror Correct Answer: ABCD QUESTION 43 What is the maximum number of nodes in a cluster that the Cisco Nexus 5010 supports? A. 12 B. 18 C. 20 D. 24 Correct Answer: B QUESTION 44 The Catalyst 2960 can be used only on the management network for clusters that have nodes. A. 12 B. 16 C. 18 D. 20 E. 24 Correct Answer: E

15 QUESTION 45 When using Data ONTAP 8.1 Cluster-Mode and later, what is the default for new aggregates? A. 32-bit aggregates B. 64-bit aggregates C. 128-bit aggregates D. cluster aggregates E. traditional aggregates F. Vserver aggregates Correct Answer: B QUESTION 46 Which feature makes it possible for a storage administrator to add more than two storage systems to a cluster? A. Scale horizontal B. Scale out C. Scale up D. Scale vertical Correct Answer: B QUESTION 47 Which statement is true about NFS exports in Cluster-Mode? A. Export policies are created and modified by editing /etc/exports. B. Exports can be either persistent or temporary. C. Export policies and rules are stored in the RDB. D. Both A and B E. Both B and C Correct Answer: C QUESTION 48 In a 2-node cluster with cluster HA enabled, which node has Epsilon by default? A. the first node to join the cluster B. the node that's been running for the longest amount of time

16 C. the node serving as mgwd ring master D. the node with the lower system ID E. neither node Correct Answer: E QUESTION 49 What are two defaults for a new Data ONTAP 8.1 or later system root aggregate? (Choose two.) A. 32-bit B. 64-bit C. 0% aggr reserve D. 5% aggr reserve Correct Answer: BC QUESTION 50 What must be configured to support cross-cluster SnapMirror relationships? A. cluster peer relationship B. intracluster port C. junction path D. minimum transfer size Correct Answer: A QUESTION 51 What communication link is necessary in order to establish cluster peer relations between two clusters? A. The cluster interface on each node must be able to communicate with the intracluster interface on each node in the peer cluster. B. The cluster interface on each node must be able to communicate with the node-mgmt interface on each node in the peer cluster. C. The intracluster interface on each node must be able to communicate with the intracluster interface on each node in the peer cluster. D. The intercluster interface on each node must be able to communicate with the intercluster interface on each node in the peer cluster. Correct Answer: D

17 QUESTION 52 A volume named volume217 resides on an aggregate named node7_aggr12 and is mounted in the namespace at junction /source/april/test217. A file named revert.cpp is at the root of volume217. A volume move operation relocates volume217 to node3_aggr3. What is the fully qualified path to revert.cpp after the move is complete? A. /node3_aggr3/source/april/test217/revert.cpp B. /node3_aggr3/volume217/revert.cpp C. /source/april/test217/revert.cpp D. /vol/source/april/test217/revert.cpp E. /vol/volume217/revert.cpp Correct Answer: C QUESTION 53 How many cluster switch(es) are required for a NetApp cluster? A. 1 B. 2 C. 4 D. 6 Correct Answer: B QUESTION 54 A FAS6280 running ONTAP 8.0.2P1 has a 32-bit root aggregate. After upgrading to Data ONTAP 8.1, what is the status of the root aggregate? A. The root aggregate remains 32-bit. B. The root aggregate converts from 32 to 64-bit in place. C. The root aggregate auto-migrates to a new 64-bit aggregate. D. The upgrade fails with a message to create a new 64-bit aggregate before upgrade. Correct Answer: A QUESTION 55 Which four steps must an administrator take before establishing a CIFS share? (Choose four.)

18 A. create a volume B. configure a share policy with the desired values C. configure an export policy D. configure name mapping E. enable Active Directory routing F. mount a volume within the Vserver namespace G. set a default share policy Correct Answer: ACDF QUESTION 56 Volumes can be moved from 32-bit aggregates to which two types of aggregates? (Choose two.) A. 32-bit aggregates B. 64-bit aggregates C. flex aggregates D. traditional aggregates Correct Answer: AB QUESTION 57 An administrator for a virtual server named abc17 mounts a new volume named vola at junction named / accounting/teama and creates two directories at the root of the new volume named 2011 and 2011/june. He also copies a file called report.doc into the directory named june. An NFS client mounts to the root of the namespace. What is the fully qualified path to report.doc? A. /abc17/accounting/teama/2011/june/report.doc B. /accounting/teama/2011/june/report.doc C. /accounting/vola/teama/2011/june/report.doc D. /vol/vola/2011/june/report.doc E. Z:\vola\2011\june\report.doc Correct Answer: B

19 QUESTION 58 What three statements are true about LIF failover? (Choose three.) A. A data Ethernet LIF fails over when the cluster is in quorum. B. A cluster management Ethernet LIF fails over when a port is down. C. A cluster management Ethernet LIF will never automatically revert back to its home port. D. A data Ethernet LIF will not revert back by default to its home port. E. A node management Ethernet LIF fails over when a port is down. F. A node management Ethernet LIF will never automatically revert back to its home port. Correct Answer: ADF QUESTION 59 What is the maximum number of nodes a NAS cluster can have? A. 1 B. 2 C. 4 D. 8 E. 16 F. 24 G. 32 Correct Answer: F QUESTION 60 Which statement is true about converting an aggregate from 32-bit to 64-bit? A. It is supported when adding disks. B. It is supported without adding disks. C. It is supported in maintenance mode. D. It is not supported. You must use VSM to migrate 32-bit to 64-bit. Correct Answer: A

20 QUESTION 61 Which five protocols are supported by Data ONTAP 8.1 Cluster-Mode or later? (Choose five) A. iscsi B. FCIP C. CIFS D. FC E. FCoE F. IFCP G. NFS Correct Answer: ACDEG (see multi-tenancy, 3rd para) QUESTION 62 Which three SMB versions do Data ONTAP Cluster Mode 8.1 and later support? (Choose three.) A. SMB 4.0 B. SMB 3.0 C. SMB 2.1 D. SMB 2.0 E. SMB l.0 Correct Answer: CDE Reference: (see smb 2.0 and 2.1) QUESTION 63 Which two actions protect an Infinite volume from the loss of a namespace constituent? (Choose two) A. Minor the namespace constituent by using an intracluster data protection mirror B. Mirror the namespace constituent by using an Intercluster data protection mirror C. Mirror the namespace constituent by using a load-sharing mirror D. Mirror the namespace constituent by using a FlexCache mirror Correct Answer: BC

21 QUESTION 64 In Data ONTAP Cluster-Mode, what is the maximum TCP read size for an NFSv3 client? A. l,048,576 bytes B. 32,768 bytes C. 65,536 bytes D. 2,097,152 bytes Correct Answer: A Reference: QUESTION 65 What are three types of Vservers? (Choose three.) A. vfiler B. node C. intercluster D. cluster E. admin F. data Correct Answer: BEF Reference: QUESTION 66 In Data ONTAP Cluster-Mode, what is the maximum cluster size for SAN protocols? (Choose Three) A. l0 nodes B. 6 nodes C. 2 nodes D. 4 nodes E. 8 nodes F. 12 nodes Correct Answer: BCD Reference: NPA_2013_Pavlicek.pdf (slide 28) QUESTION 67 Which NetApp Virtual Storage Tier component works aggregate-wide on a FAS controller? A. Flash IO

22 B. Flash Cache C. Flash Accel D. Flash Disk E. Flash Pool Correct Answer: B Reference: QUESTION 68 Prior to breaking a SnapMirror DP relationship, which statement is true about mounting the destination volume? A. It can be mounted in the namespace of any Vserver in the source- or destination cluster. B. It cannot be mounted until after the SnapMirror break is performed. C. It can be mounted in the namespace of the destination Vserver. D. It can be mounted only in the same namespace as the source volume. Correct Answer: C QUESTION 69 Which Data ONTAP Cluster-Mode clone technology will lock a Snapshot copy? A. LUN Clone B. Snapshot Clone C. Volume Clone D. Aggr Clone Correct Answer: A QUESTION 70 What happens if a load Sharing (LS) mirror replies a Vserver root volume to any node in the cluster and you promote one of the mirror destinations? A. All clients temporarily gain read/write access to the root volume B. The original source volume is prevented from becoming stale. C. All clients must re mount. D. There is no disruption for any connected clients. Correct Answer: A

23 QUESTION 71 Which two now features are available in Data ONTAP C-Mode? (Choose two.) A. Flash pool B. SSD Support C. Infinite volume D. Infiniband Correct Answer: BC QUESTION 72 What two actions should an administrator take before shutting down two nodes of a 4-node cluster? (Choose two.) A. reassign the master of all RDB rings to a node that will be staying up B. migrate node-management LIFs to a node that will be staying up C. move Vserver root volumes to a node that will be staying up D. set both nodes that are coming down to "ineligible" E. ensure that Epsilon is assigned to one of the nodes that will be staying up Correct Answer: DE QUESTION 73 What are the three types of resources supported by logical interfaces? (Choose three.) A. VServer-routes B. port C. Interface groups D. failover groups E. cluster-routes F. cluster G. group-routes H. VLAN Correct Answer: BCH QUESTION 74

24 Which statement is true about NFS exports in Data ONTAP Cluster-Mode? A. Export policies are created and modified by editing /etc/exports. B. Exports can be either persistent or temporary. C. Export policies and rules are stored in the RDB. D. Both A and B E. Both B and C Correct Answer: C QUESTION 75 In Data ONTAP Cluster-Mode, what is the maximum node size for SAN protocols? (Choose three) A. 24 nodes B. 12 nodes C. 8 nodes D. 6 nodes E. 4 nodes F. 2 nodes Correct Answer: DEF QUESTION 76 Which Data ONTAP Cluster-Mode clone technology can clone an individual LUN Inside a volume without cloning the entire volume? A. FlexClone B. LUN Clone C. Snap Clone D. Vol Clone E. Aggr Clone Correct Answer: B QUESTION 77 Which boot argument toggles between 7-Mode and Cluster-Mode configurations? A. bootarg.init.boot_gx B. bootarg.init.boot_7-mode

25 C. bootarg.init.boot_cluster-mode D. bootarg.init.boot_clustered Correct Answer: D QUESTION 78 Which security style is supported with Infinite Volumes? A. Block B. NTFS C. Unix security style D. Mixed Correct Answer: C Reference: QUESTION 79 Which are two requirements for the Cluster-Mode solution? (Choose two.) A. Thunderbolt or LightPeak cabling with backplane interface on storage B. Management switches C. InfiniBand cabling with backplane interface for all storage systems D. FC Cluster switches E. Cluster switches Correct Answer: CE QUESTION 80 To support multi-tenancy, an administrator must create or enable which type of unique login account? A. vsadmin, for the cluster B. admin, for each Vserver C. admin, for the cluster D. vsadmin, for each Vserver Correct Answer: D

26 QUESTION 81 What are two capabilities of Vserver setup? (Choose two) A. It licenses Vserver functionality. B. It joins an existing Vserver to the cluster. C. It creates a new Vservers that can host FCP LUNs. D. It creates a new cluster Vservers. E. It configures an existing Vserver. Correct Answer: BD QUESTION 82 Which NetApp Virtual Storage Tier component works controller-wide on a FAS controller? A. Flash Pool B. Flash IO C. Flash Cache D. Flash Accel E. Flash Disk Correct Answer: C QUESTION 83 Which aggregate type is supported for Flash Pool? A. Traditional B. 32-bit C. 64 bit D. 128-bit Correct Answer: C QUESTION 84 Which NetApp Virtual Storage Tier component works at the host level? A. Flash Pool B. Flash IO C. Flash Disk

27 D. Flash Accel E. Flash Cache Correct Answer: D Reference: QUESTION 85 Which version of Data ONTAP first supports Flash Pool? A. Data ONTAP Cluster-Mode B. Data ONTAP 7.3 C. Data ONTAP Mode D. Data ONTAP 8.1 Cluster-Mode Correct Answer: A Reference: (See,flash pool technology) QUESTION 86 Which three network switches are supported in Data ONTAP Cluster Mode? (Choose two.) A. Nexus 5010 B. Nexus 5020 C. CN1601 D. CN1610 Correct Answer: ABD QUESTION 87 Which storage system combination is supported in a 4-node cluster? A. a pair of FAS3270s and a pair of FAS3020s B. a pair of FAS3270s with a FAS3240 and a FAS6240 C. a pair of FAS6280s and a pair of E7900s D. a pair of FAS6280s and a pair of FAS3240s Correct Answer: D

28 QUESTION 88 What are four storage efficiency features that Data ONTAP 8.1 or later Cluster-Mode provides? (Choose four.) A. transparent files B. thin provisioning C. SnapVault D. FlexClone E. deduplication F. compression Correct Answer: BDEF QUESTION 89 Which protocol(s) does Infinite Volumes support? A. All supported protocols on Data ONTAP B. NFSv3 and NFSv4 only C. NFS v2 and NFSv3 only D. NFSv3 only E. NFSv3 and SMB 1.0 only Correct Answer: D Reference: QUESTION 90 What three statements are true about LIF failover? (Choose three.) A. A node management Ethernet LIF will never automatically revert back to its home port. B. A node management Ethernet LIF can fail over to its partner node when a port is down. C. A data Ethernet LIF will not automatically revert back to its home port. D. A cluster management Ethernet LIF will never automatically revert back to its home port E. A cluster management Ethernet LIF can fail over when a port is down. F. A data Ethernet LIF can fail over when the cluster is in quorum. Correct Answer: ACF QUESTION 91 Which three disk-type configurations are supported for Flash Pool? (Choose three)

29 A. FC and SAS B. FC and SSD C. SATA and SAS D. SATA and SSD E. SSD and SAS Correct Answer: BDE QUESTION 92 Which three are components of the NetApp Virtual Storage Tier (VST)? (Choose three) A. Flash Accel B. Flash Cache C. Flash Disk D. Flash IO E. Flash Pool Correct Answer: ABE Reference: (see figure 1) QUESTION 93 What is the default system account? A. admin B. admin_user C. administrator D. root Correct Answer: A QUESTION 94 Administrators can natively run Data ONTAP 7-Mode commands in what shell? A. Adminshell B. Clustershell C. Nodeshell D. Systemshell Correct Answer: C

30 QUESTION 95 What command starts recording the current CLI session into a file? A. system cli record B. system record start C. system script record D. system script start Correct Answer: D QUESTION 96 To maintain a cluster quorum, Epsilon functions as a. A. duplicated management database B. master node C. secondary node D. tie-breaker Correct Answer: D QUESTION 97 A cluster node is a(n). A. Admin node B. Cluster vsetver C. HA storage controller pair D. Storage controller Correct Answer: D QUESTION 98 New systems are shipped with the root volume in a 64-bit aggregate starting with which Data ONTAP release? A B

31 C D. 8.1 Correct Answer: D QUESTION 99 How many cluster ports does each node have by default? A. One B. Two C. Three D. Four Correct Answer: B QUESTION 100 What three cluster administrator roles are predefined? (Choose three.) A. admin B. backup C. none D. readonly E. root F. vsadmin Correct Answer: ACD QUESTION 101 What two Vserver administrator roles are predefined? (Choose two.) A. admin B. readonly C. root D. vsadmin E. vsadmin-readonly Correct Answer: DE

32 QUESTION 102 What three protocols obtain the Data ONTAP software image? (Choose three.) A. CIFS B. FTP C. HTTP D. HTTPS E. NFS F. TFTP Correct Answer: BCF QUESTION 103 What two logical interfaces have failover and migration capabilities? {Choose two.) A. client B. cluster management C. controller D. data E. node management Correct Answer: BD QUESTION 104 What three privilege levels are found in clustered Data ONTAP? (Choose three.) A. admin B. advanced C. backup D. diagnostic E. manage F. single_user Correct Answer: ABD QUESTION 105 What are the four replicated database rings in a cluster? (Choose four.)

33 A. administration (admdb) B. logical-interface manager (lifmgr) C. management application (mgmt) D. protocol management daemon (prtodb) E. SAN management daemon (bcomd) F. virtual-interface manager (vifmgr) G. volume location database (vldb) Correct Answer: CEFG QUESTION 106 Which two Vservers are created automatically by the cluster setup process? (Choose two.) A. Admin B. Data C. Management D. Node E. Protocol Correct Answer: AD QUESTION 107 When a pnfs 4.1 client is connected to a LIF on node 2 of an 8 node clustered Data ONTAP pnfs 4.1 Vserver, and the data volume being read is moved to node 1, which statement is true? A. The client redirects from a LIF on node 2 to a LIF on node 1 if available and continues data access uninterrupted. B. The client stays connected to a LIF on node 2 and accesses the data on node 1 through the cluster network. C. DNS records are updated and the client moves access to a LIF on node 1 from DNS referral. D. When a data volume is moved, only CIFS clients are affected. Correct Answer: A QUESTION 108 For RAID-DP aggregates created with clustered Data ONTAP 8.2 or later, what is the default minimum number of disks? A. 1

34 B. 2 C. 3 D. 4 E. 5 F. 6 G. 10 Correct Answer: E QUESTION 109 Which two NetApp tools perform pre-checks to determine whether a NAS environment meets the requirements for transitioning from 7-Mode to clustered Data ONTAP? (Choose two.) A. 7-Mode Transition Tool B. Clustered ONTAP Transition Tool C. Migration Checklist D. Transition Advisor E. Transition Deck Correct Answer: AD QUESTION 110 Within clustered Data ONTAP 8.2 or later, which two functionalities are supported with an external asynchronous FPolicy server? (Choose two.) A. Audit logging B. Compression and decompression services C. Encryption and decryption services D. File access E. Hierarchical storage management Correct Answer: AD QUESTION 111 Which two statements are true with clustered Data ONTAP support of IPv6? (Choose two.) A. You can define multicast address B. You can define a link-local address C. You can define a look-back address

35 D. You must use a network mask of 64 E. You can define an address with 64-bit hexadecimal ID in prefix: id format Correct Answer: DE QUESTION 112 With clustered Data ONTAP 8.2, what two non-disruptive upgrade techniques are supported on clusters of 8 modes or more? (Choose two.) A. batch B. parallel C. rolling D. synchronous Correct Answer: AC QUESTION 113 Name two modes of BranchCache. (Choose two.) A. hosted B. distributed C. intercluster D. Vserver-aware Correct Answer: AB QUESTION 114 Identify two asynchronous Fpolicy applications. (Choose two.) A. Quota management B. File-access and audit logging C. Storage resource management D. Compression and decompression services Correct Answer: BC

36