Defining the Next Generation of the IP-Connected Enterprise: A Practitioner s Guide to Best Practices Proudly presented by: Andy Jimenez ANIXTER INC.

Transcription

1 Defining the Next Generation of the IP-Connected Enterprise: A Practitioner s Guide to Best Practices Proudly presented by: Andy Jimenez ANIXTER INC.

2 Attendee Announcements Seminar Raffle Be sure to drop your raffle ticket in the drum at today s Keynote located in the Mile High Ballroom. You have a chance to win a $250 American Express Gift Card. One winner will be drawn at the Opening Keynote and the Closing Keynote. You must be present to win. Seminar Evaluations All attendees will be receiving an with regards to the seminar and we encourage you to respond to the surveys. The survey results will be compiled by ISE EXPO team members, summarized, and will be shared with the seminar speakers. The seminar feedback is an important aspect of continually improving ISE EXPO. Seminar Certificates Attendees will be able to log into the Attendee Resource Center (ARC) using their first name, last name, and their Badge ID (this number will appear on the badge and also on any registration confirmations) to view/print their seminar certificates. If a certificate is needed on-site, the attendee may visit the ISE EXPO registration counter between the hours of 1 PM 3 PM September 21 & September 22 and ask for a certificate to be printed. Attendees will be able to access the ARC website up to 2 3 months after the event to print CEC certificates. Subscribe ISE magazine is the most trusted educational and solutions resource for 21,000 professionals across the ICT industry. Each month, ISE delivers 20+ educational articles and showcases leading technology solutions in an approachable and interesting format, available in both print and digital. Visit to begin or renew your subscription.

3 Your Presenter Andy Jimenez Vice President, Technology, Enterprise Cabling and Security Solutions, Anixter Over 20 years experience in telecommunications testing and product verification Leads standards development and product testing at Anixter s Infrastructure Solutions Lab SM Active voting member of TIA TR-42.7 cabling and IEEE LAN/MAN standards committees Cisco CCNA with Wireless Specialization

4 BICSI History BICSI stands for Building Industry Consulting Service International Founded by the original BICs Building Industry Consultants Founded in 1974 Incorporated in 1977 Registered Communications Distribution Designer credential established in 1984

5 What BICSI Does... Publications Standards Education Conferences ICT Industry Professional Development Credentials Certifications

6 Agenda Market trends IoT defined Impact on physical infrastructure systems IoT applications Building technologies Physical security Data centers

7 Smart building evolution By 2020, one in five buildings will be a smart building, supporting 26 billion connected devices, with cloud-based software and services growing at a rate of 33 percent. Source: Memoori, Big Data for Smart Buildings: Market Prospects 2015 to 2020.

8 Internet of Things Defined By billion devices connected to internet Will add $19 trillion to global GDP [1] Interconnection of uniquely identifiable embedded computing devices within the existing Internet infrastructure [2] Includes: IP addressable devices Sensors Actuating devices Diverse protocol and application environment 1. Forbes- G. Press - Internet of Things By The Numbers: Market Estimates And Forecasts 2. J. Höller, V. Tsiatsis, C. Mulligan, S. Karnouskos, S. Avesand, D. Boyle: From Machine-to-Machine to the Internet of Things: Introduction to a New Age of Intelligence

9 Common Management Infrastructure All elements are managed through a common infrastructure In-band Out-of-band Source : IEEE nuts-and-bolts-of-the-internet-of-things.pdf

10 Challenges Device management Heterogeneous protocol environment Standards development

11 Standards Snapshot: Wired and Wireless Standard or working group ANSI/TIA-568-C Series and ISO ANSI/TIA-862-A ANSI/TIA-1005-A ONVIF IEEE 802.3at, IEEE 802.3af, IEEE 802.3bt IEEE IEEE IEEE Technology Twisted pair and optical transport Building automation Industrial automation Video surveillance and access control Power over Ethernet Wireless LAN, Wi-Fi, mesh Wireless PAN, ZigBee, mesh Smart grid Many proprietary communications protocols exist Coordination across standards organizations needed

12 IoT Standardization Efforts

13 BUILDING TECHNOLOGIES

14 Application Convergence Continues to Evolve 1980 s 2000 s Last 10 Years Now?

15 Convergence IOT information technology IT operation technology OT ENABLEMENT

16 IP Enabled Sensors IOT APP BMS over IP STRUCTURED CABLING ENERGY MONITORING Power Meter Sub Meter Data Acquisition GATEWAY LIGHTING CONTROL COMFORT MANAGEMENT GATEWAY

17 Choosing the Appropriate Cabling Media Flexibility with respect to supported services Required useful life of cabling Facility/site size and occupant population Equipment manufacturer recommendations or specifications Channel capacity within the cabling system Category 6 minimum recommendation for horizontal cabling 50/125 micron, 850 nm laser-optimized multimode fiber (OM3) is recommended for most backbone applications Be aware of off-shore/counterfeit cable

18 Power Over Communications Cabling IEEE PoE Delivered via Ethernet switch or midspan device Power is supplied in common mode over two or more of the differential pairs of wires IEEE 802.3af Provides up to 15.4 W of DC power (PSE), W at load (PD) IEEE 802.3at PoE standard also known as PoE+ provides up to 30 W of DC power (PSE), 25.5 W at load (PD) Ethernet Ethernet UPS PoE switch Non-PoE switch Power Ethernet Midspan PoE camera PoE camera

19 Before we Share our Opinion At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position, explanation, or interpretation of the IEEE. IEEE-SA Standards Board Operation Manual

20 Evolution of Power Over Ethernet

21 4-Pair Power Over Ethernet IEEE 802.3bt Task Force Applications Requiring More Than 30 Watts of Power Markets Nurse call systems healthcare Point of sale retail (POS credit card readers and printers) IP turrets banking, financial trade floor phone systems Building management (lighting fixtures and controllers, access controllers, etc.) Thin clients, virtual desktop infrastructure (VDI) terminals (high-end configuration) Videoconferencing, hospitality (e. g.,: PoE-powered switches) IP security cameras (pan, tilt, zoom cameras) Industrial (brushless and stepper drives, motor control units) Typical power consumption 80% market needs >30 W (typically 50 W) 40 50% in W range Typically 45 W W -50 W Typically W W range >30 W

22 The Other Wireless Standard: IEEE or Zigbee Wireless Targeted toward applications requiring low bit rates, low power and high scalability Building automation Home automation Industrial automation Technology is based on a mesh, self-organizing network topology Standard protocols allow for vendor interoperability Network coordinator Full Function node Reduced Function node Communications flow Virtual links For more information:

23 Zigbee Technology Comparison Market name standard ZigBee NFC LTE Advanced Wi-Fi TM ac Bluetooth TM Application focus Monitoring and control Payment and access control Wide area voice and data Web, , video Cable replacement Battery life (days) 100-1, Network size Unlimited (2 G. ) Data rate (Mbps) Transmission range (meters) Success metrics , Reliability, power, scalability, cost Authentication, convenience Reach, quality Speed, flexibility Cost, convenience

24 Zigbee Technology Comparison Market name standard ZigBee NFC LTE Advanced Wi-Fi TM ac Bluetooth TM Application focus Monitoring and control Payment and access control Wide area voice and data Web, , video Cable replacement Battery life (days) 100-1, Network size Unlimited (2 G. ) Data rate (Mbps) Transmission range (meters) Success metrics , Reliability, power, scalability, cost Authentication, convenience Reach, quality Speed, flexibility Cost, convenience

25 PHYSICAL SECURITY

26 State of the Physical Security Industry: The Direction What end-users want Avoid single manufacturer lock in Best of breed Cost-effective deployments Reliability and performance Driving change IP convergence Industry demand Interoperable systems Unified interfaces

27 Path to interoperability Single Manufacturer could result in several disparate systems Proprietary No Third Party Integration Locked-In & Compatibility Issues Manufacturer Road Map Dependent Open Architecture where the industry sits today Open API Limited to Integration Partners Not Standards Based Not Guaranteed True Open Architecture where the end user is in control Standards Based Not Proprietary Global Industry Supported

28 Organization Driving Standardization Open Network Video Interface Forum (ONVIF) (continued) To facilitate the development of a global open standard Standardize communication between IP-based physical security devices Ensure interoperability Open to all companies

29 Open Network Video Interface Forum (ONVIF)

30 Centralized vs. Decentralized Architectures Centralized architecture Decentralized architecture

31 Wireless Architectures Source - Fluidmesh

32 Video Surveillance Camera as a Sensor

33 Door Controller Types IP: Connects to the PC host directly through a TCP/IP network. IP controllers provide greater functionality than serial controllers and can be integrated directly into existing IT networks. Self-contained: Simple stand-alone controllers are typically used to control access to a single door. Primarily keypad systems and can be used to trigger a door strike, an electromagnetic door lock or another relay-activated device. No access records or time zone restrictions in most cases Analog: Connects to the PC host through an RS-232 serial connection or similar serial transmission Edge devices: Intelligent IP readers that usually do not have traditional control panels; they communicate with the PC that acts as a host.

34 Analog Access Control A dedicated PC is required to host software and manage the access control system Requires an independent communication network to be installed RS-232 RS-232/RS-485 Converter RS-232 connection from first controller to PC RS-232 max. distance is 50 ft.; longer distances require an RS-232/RS-485 converter RS-485 RS-485 RS-485 RS-485 RS-485 RS-485 is daisy chained from controller to controller RS-485 loop 4,000 ft. max.

35 IP-Based Access Control Software is hosted on a server that can be accessed by multiple workstations Uses existing LAN infrastructure to communicate to controllers Controllers are connected to the existing network in a star configuration Standard 100 m distance from controller to switch LAN

36 IP-Based Access Control Power is provided by a PoE switch or midspan power Back-up power is provided by an UPS Each controller is IP addressed Serial connection from the door to the controller is standard low-voltage cabling IP-based communication cabling is TIA/ISO standard balanced twisted pair

37 DATA CENTER

38 The Data Center: IoT Proving Ground Infrastructure as a platform: Building blocks for DC interoperability Risk management A layered physical security approach Network migration Future-ready, cabling infrastructure Power optimization Scalable and modular power distribution Thermal efficiency Conditional environmental control DCIM enablement Planned infrastructure management

39 DCIM BUSINESS DRIVERS DCIM Adoption Drivers Reducing energy consumption Better management of data center capacity (power, cooling, space) Increasing utilization of IT assets Identifying problems that could threaten availability Better visibility and manageablity of assets and status Reducting staff costs Improving data center customer service 0% 10% 20% 30% 40% 50% 60% 70% 80% Source: Uptime Institute Global Datacenter Annual Survey, 2013

40 THE FIVE SENSES OF DCIM Environmental Capacity Change Power Asset Management Monitoring Planning How much How power, Where do Do How I I cooling, manage have much is my any power equipment connectivity moves, hot am or adds cold Business I consuming? and spots the space floor? changes? my do data I have? center? Should I build How can a What How new I understand much switch is data the power center temperature is my when server do or I can have work connected of I stay available my is completed? cabinets? my to? existing me? space longer? Where is the If I lose most Can How a ideal much power I can raise I place maintenance be feed, the more set what the point proactive data equipment do in my center I have to data dealing does left to center? put on that with my this effect new power device? server? upstream? issues? DCIM Process

41 IoT in Action - DC Case Study

42 Summary IoT is here and will continue to evolve Industry standardization efforts for IoT device communication and installation practices are critical to its success Vertical market applications that will benefit from IoT include physical security, intelligent building controls, and data centers

43 Questions & Answers

44 THANK YOU.