DOCSIS Products

Transcription

1 Products Rev: Blonder Tongue Laboratories, Inc. All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.

2 Model: BT-CMTS /2.0 CMTS Small Deployments Products The BT-CMTS-3000 is a Cable Modem Termination System targeted for small- to medium-size deployments to provide two-way data services on a coaxial network. The system is designed to support /EuroDOCIS cable modems in amounts up to 400 for version 3.0 or 500 for version 2.0. Internet GigE/SFP 16x Downstream QAM Channels 4x Upstream QPSK/QAM Channels Redundant Power Supplies Features /Euro 3.0 / 2.0 compatible High Bandwidth 16 downstream channels, up to QAM upstream channels, up to QAM Cable Modem access capacity ( 3.0) 1RU 19 inch chassis with dual redundant universal power supplies - hot-swappable End-to-end Quality of Service (QoS) Support Real-time CPE Info Load Balancing Function Dynamic balancing, restricted load balancing group Support load balancing strategy Subnet VLAN & L2VPN System Log Spectrum Monitoring Automatic Frequency Hopping Internal DHCP server Dual-Stacked IPv4/IPv6 capability Ordering Information Model Stock # Description BT-CMTS /Euro 3.0 CMTS (Cable Modem Termination System)

3 Model: BT-CMTS-3000 Applications and Specifications HOSPITALITY, MDUs, and CAMPUSES Input/Output Interfaces Connectors GigE: Standard: RF Upstream Connectors: # of Channels: Frequency Range: Modulation Mode: Bandwidth: Receive Level: Qty of Service Flow: RF Downstream Connectors: # of Channels: Frequency Range: Modulation Mode: Bandwidth: RF Level: Qty of Service Flow: Channel Selection: 1x RJ45 1x SFP (For Optical Plug-In) Ethernet 1000Base-T Alarms/Monitoring/Control 4x F Conn MHz QPSK/QAM 16, QAM 32, QAM , 3.2 or 6.4 MHz -7 to +23 dbmv (53 to MHz -10 to +20 dbmv (50 to MHz -13 to +17 dbmv (47 to MHz x F conn MHz QAM 64, QAM /8.0 MHz +44 dbmv (104 dbuv) Channels within 192 MHz Local Monitoring: 1x Power A (Power Supply A) 1x Power B (Power Supply B) 1x GIGE 1x SFP 1x LOG 1x PWR 1x RUN 1x ALM Remote Monitoring/Control: GUI-based menu via Web Browser (1x RJ45 connector; 10/100Base-T) Console: 1x RJ45 Front-Panel Connector System Functions General DHCP DHCPv6: IPv6: VLAN & L2VPN: QoS: MAC Domain Management: Multicast: Load balance: Spectrum Monitor: Automatic Opening: Electrical Power: Power Dissipation: Mechanical Operating Temperature: Operating Humidity: Dimensions (W x D x H): Weight: DHCP relay/snooping DHCP bundle DHCP lease query DHCPv6 relay/snooping DHCPv6 bundle DHCPv6 lease query DHCPv6-PD Supports Vendor Class string to identify equipment type Supports Insert Remote-ID, Interface-ID, CMTS capabilities and CM MAC IPv4 and IPv6 dual-stack 802.1ad/802.1q/subnet VLAN Service flow-based VLAN addition or deletion VLAN addition according to option60 L2VPN support VLAN conversion Static service flow/dynamic service flow/service class 3.0 USCB scheduling PowerBoost MDD & MDF enable and disable MTC & MRC enable and disable UDC enable and disable Piggyback, shared-secret, channel bonding Multicast authentication Static Multicast IGMP V2/V3 Snooping RLBG/GLBG Reverse spectrum monitoring (0~81 MHz) Automatic Opening and upgrade based on DHCP and TFTP PN8600 series OLT unified opening and upgrade support 90V-264VAC, 50/60 Hz (dual redundancy power supplies) 50W 32 to 104 F (0 to 40 C) 10% to 90% (Non-condensing) 19 x 11.8 x 1.75 (480mm x 300mm x 44mm) 12 lbs (5.5kg)

4 Model: BT-CMTS /2.0 CMTS Large Deployments Products The BT-CMTS-3210 is a Cable Modem Termination System targeted for medium- to large-size deployments to provide two-way data services on a coaxial network. The system is designed to support up to /2.0 cable modems. Internet 2x10GbE/SFP 32x Downstream QAM Channels 10x Upstream QPSK/QAM Channels Redundant Power Supplies Features /Euro 3.0 / 2.0 compatible High Bandwidth: 32 downstream channels, up to QAM upstream channels, up to QAM 256 1RU 19 inch chassis with dual redundant universal power supplies - hot-swappable End-to-End Quality of Service (QoS) Support Real-time CPE Info Load Balancing Function: Dynamic balancing, restricted load balancing group Support load balancing strategy Subnet VLAN & L2VPN Spectrum Monitoring Automatic Frequency Hopping Internal DHCP server Dual-Stacked IPv4/IPv6 capability Ordering Information Model Stock # Description BT-CMTS /Euro 3.0 CMTS (Cable Modem Termination System)

5 Applications and Specifications HOSPITALITY, MDUs, and CAMPUSES BT-CMTS-3210 BT-CMTS-3210 BT-CMTS-3210 Input/Output Interfaces Connectors 10GbE: Standard: RF Upstream Connectors: # of Channels: Frequency Range: Modulation Mode: Bandwidth: Receive Level: Qty of Service Flow: RF Downstream Connectors: # of Channels: Frequency Range: Modulation Mode: Bandwidth: RF Level: Qty of Service Flow: 2x SFP (For Optical Plug-In) Ethernet Alarms/Monitoring/Control 4x F Conn MHz QPSK/QAM 16, QAM 32, QAM 64, QAM , 3.2 or 6.4 MHz -7 to +23 dbmv (53 to MHz -10 to +20 dbmv (50 to MHz -13 to +17 dbmv (47 to MHz 4K 1x F conn MHz QAM 64, QAM 256, QAM /8.0 MHz +44 dbmv (104 dbuv) 4K Local Monitoring: 1x Power A (Power Supply A) 1x Power B (Power Supply B) 10x GbE 2x SFP 1x PWR 1x RUN 1x CABLE 1x ALM 1x Reset Control: GUI-based menu via Web Browser (1x RJ45 connector; 1GbE) Console: 1x RJ45 Front-Panel Connector System Functions General DHCP DHCPv6: IPv6: VLAN & L2VPN: QoS: MAC Domain Management: Multicast: Load balance: Spectrum Monitor: Automatic Opening: Electrical Power: Power Dissipation: Mechanical Operating Temperature: Operating Humidity: Dimensions (W x D x H): Weight: DHCP relay/snooping DHCP bundle DHCP lease query DHCPv6 relay/snooping DHCPv6 bundle DHCPv6 lease query DHCPv6-PD Supports Vendor Class string to identify equipment type Supports Insert Remote-ID, Interface-ID, CMTS capabilities and CM MAC IPv4 and IPv6 dual-stack 802.1ad/802.1q/subnet VLAN Service flow-based VLAN addition or deletion VLAN addition according to option60 L2VPN support VLAN conversion Static service flow/dynamic service flow/service class 3.0 USCB scheduling PowerBoost MDD & MDF enable and disable MTC & MRC enable and disable UDC enable and disable Piggyback, shared-secret, channel bonding Multicast authentication Static Multicast IGMP V2/V3 Snooping RLBG/GLBG Reverse spectrum monitoring (0~81 MHz) Automatic Opening and upgrade based on DHCP and TFTP PN8600 series OLT unified opening and upgrade support 90V-264VAC, 50/60 Hz (dual redundancy power supplies) 70W 32 to 104 F (0 to 40 C) 10% to 90% (Non-condensing) 19 x 11.8 x 1.75 (480mm x 300mm x 44mm) 12 lbs (5.5kg)

6 Model: BT-CMTS /3.0/2.0 CMTS Products The BT-CMTS is a 3.1/3.0/2.0 Cable Modem Termination System (CMTS) targeted for medium to large-size deployments to provide two-way data services on a coaxial network. The ability of the BT-CMTS to operate in Mix-Mode, gives it the flexibility to provide service to 3.1 and 3.0 modems simultaneously. This feature gives the system operator a convenient means of migration to 3.1, as well as making it possible for gradual or partial deployments of 3.1 modems to aid in controlling upgrade expenditures. Partial 3.1 deployments provide premium data service to only those customers that subscribe to it or in a hotel environment, specific rooms or suites that offer additional amenities including the enhanced data service at increased room rates. Internet 2x10GbE/SFP Downstream Channels OFDM QAM Features Upstream Channels OFDMA QAM /Euro 3.1/3.0/2.0 compatible 1RU 19 inch chassis with dual redundant universal power supplies - hot-swappable Mix-Mode feature supports simultaneous operation of 3.1 and 3.0 CMs Supports 1000 CMs in Mix-Mode (projected for initial SW release) End-to-end Quality of Service (QoS) Support Real-time CPE Info Load Balancing Function Ordering Information Model Stock # Description BT-CMTS /Euro 3.1/3.0/2.0 CMTS (Cable Modem Termination System) Redundant Power Supplies Subnet VLAN & L2VPN Spectrum Monitoring Automatic Frequency Hopping Internal DHCP server Dual-Stacked IPv4/IPv6 capability

7 Model: BT-CMTS Specifications Input/Output Interfaces Connectors RF DS: 10GbE: Standard: Channel Frequency Range 3.1: 3.0: Working Channel 3.1: 3.0: Channel Width 3.1: 3.0: Modulation Mode 3.1: 3.0: Reception Level Range 3.1: 3.0: Max QAM Output Level (6 MHz) 1x F Conn. 2x SFP (For Optical Plug-In) Ethernet Downstream 108/258~1218 MHz 54/87/108~1003 MHz 6 OFDM 64 ( 64, NC 32, BC 64) 24~192 MHz 6/ 8 MHz OFDM (16/ 64/ 128/ 256/ 512/ 1024/ 2048/ 4096 QAM) 64/256/1024 QAM / / channels channels channels 49 8 channels 52 4 channels 56 2 channels 60 1 channel Connectors RF US: 4x F Conn. Quality of Service Flow: Upstream 5~85/204 MHz 5~42/65/85 MHz 2 OFDMA 12 () 6.4~96 MHz 1.6/ 3.2/ 6.4 MHz 4K OFDMA (BPSK, QPSK, 16/ 32 /64 /128/ 256 /512/ 1024/ 2048 QAM) QPSK, 16/ 32/ 64/ 256 QAM -4 dbmv to 10 dbmv MHz; MHz; MHz System Functions Alarms/Monitoring/Control IP Stack: Support IPv4 and IPv6 dual-stack DHCP: Support DHCP relay/ snooping Support DHCP bundle Support DHCP lease query Support according to Option 60 to identify equipment type Support insert Remote-ID, Interface-ID, CMTS capabilities and CM MAC DHCPv6: Support DHCPv6 relay/ snooping Support DHCPv6 bundle Support DHCPv6 lease query Support DHCPv6-PD Support according to Option 60 to identify equipment type Support insert Remote-ID, Interface-ID, CMTS capabilities and CM MAC VLAN & L2VPN: Support 802.1ad/ 802.1q Support service flow-based VLAN addition or deletion Support VLAN addition according to device type Support the L2VPN QoS: Static service flow/dynamic service flow/service class 3.0 USCB scheduling PowerBoost MAC Domain Management: Multicast: Load balance: Support MDD & MDF enable and disable Support MTC & MRC enable and disable Support UDC enable and disable Support upstream automatic frequency hopping Support piggyback, shared-secret, channel bonding Support multicast authentication Support IGMP V2/ V3 Snooping Support MLD V1/ V2 Support RLBG/ GLBG Support load balance priority Pre-Production Specifications Subject to Change General Electrical Local Monitoring: 1x Power A (Power Supply A) 1x Power B (Power Supply B) 10x GbE 2x SFP 1x PWR 1x RUN 1x CABLE 1x ALM 1x Reset Control: GUI-based menu via Web Browser (1x RJ45 connector; 1GbE) Console: 1x RJ45 Front-Panel Connector Power: Power Dissipation: Mechanical Operating Temperature: Operating Humidity: Dimensions (W x D x H): Weight: 90V-264VAC, 50/60 Hz (dual redundancy power supplies) 70W 32 to 104 F (0 to 40 C) 10% to 90% (Non-condensing) 19 x 11.8 x 1.75 (480mm x 300mm x 44mm) 12 lbs (5.5kg)

8 Model: DMM-5500 Modem Module Products The DMM-5500 ( Modem Module) is a 3.0/2.0 compliant cable modem expansion module designed for compatibility and support with the LG 5500 set-top box serving Commercial TV and Lodging deployments. This integrated solution provides an expanded feature set to not only minimize interconnect cabling and power requirements for cleaner and more reliable installations, but also is a cost-effective way to deliver IP OTT communications, interactive guest services, and based high speed internet access (HSIA) over HFC and coaxial RF systems. LG Model: 5500 DMM-5500 Cable Input RF Out RF In Features 3.0 Compliant Modem Card Designed to mate with the LG 5500 Set Top Box Built-in CATV Signal Splitter Cost-effective solution for Lodging applications such as: Hotel Guest Rooms Cruise Ship Cabins Assisted Living and Healthcare Facilities Ordering Information Model Stock # Description DMM A Modem Module

9 Model: DMM-5500 Application and Specifications IPTV DELIVERY BT-CMTS-3000 and DMM-5500 RF Downstream Standards/Connectivity/Interfaces General Frequency Range: 108~1002MHz () Demodulation: QAM 64/ QAM 256 Max. Data Rate: Up to 320 Mbps with 8DS channel bonding () Bandwidth: 6MHz () Signal Level: -15~ 15dBmV () Input Return Loss: > 7dB (108 ~ 1002MHz) Protocol Support: 3.0/2.0 Interfaces: WAN Interface F type female 75 Ω: 2, port CPEs Maximum number of CPEs: Filtering: Number of SIDs: 16 Frequency Searching Frequency Cache: Channel Plan: Power: Power Dissipation: Mechanical Operating Temperature: Operating Humidity: Storage Temperature: Dimensions (W x H x D): Weight: 64 (64 MAC addresses) LLC: 16 IP: 32 5 entries 1MHz () from LG5500 internal connector 8.5 W (Typical operation), 9.25 W (Maximum) 32 to 104 F (0 to 40 C) 10% to 90% (Non-condensing) 14 to 122 F (-10 to 50 C) 4.44 x 1.13 x 7.25 in ( x x mm) 8 oz (227 g) RF Upstream Frequency Range: 5 ~ 85MHz ( 3.0) Modulation TDMA: QPSK, QAM 8, QAM 16, QAM 32, and QAM 64 S-CDMA: QPSK, QAM 8, QAM 16, QAM 32, QAM 64, and QAM 128 Max. Data Rate Bandwidth Signal Level QPSK: QAM 16: TDMA: S-CDMA: TDMA: S-CDMA: Output Return Loss: Alarms/Monitoring/Control Diagnostic LEDs: Management: Surge Protection: 320, 640, 1280, 2560, 5120kbps 640, 1280, 2560, 5120, 10240kbps 200, 400, 800, 1600, 3200 and 6400 khz 1600, 3200 and 6400 khz +8 to +54 dbmv (QAM 32, QAM 64) +8 to +55 dbmv (QAM 8, QAM 16) +8 to +58 dbmv (QPSK) +8 to +53 dbmv (all modulations) Output level of CM can automatically be controlled by CMTS through power ranging function (1dB steps) > 7dB (5 ~ 85MHz) DS, DS1, US, US1, STATUS, LINK CMTS Control On RF Input shall sustain at least 1kV Related Products Model BT-CMTS-3000 BTPRO-7000 CM8FO Description Cable Modem Termination System HD Tablet with Cable Modem and Fiber Optic Options

10 Model: DMM-5500-PoE Modem Module Products The DMM-5500-PoE is a 3.0/2.0 compliant cable modem expansion module designed for compatibility and support with the LG STB 5500 serving Commercial TV and Lodging deployments. The DMM-5500-PoE features a built-in Ethernet switch that enables the unit to communicate with the LG STB 5500, and offers two additional RJ45 switched ports, one of which supports Power over Ethernet (PoE) providing Wireless Access Point (WAP) compatibility. The DMM-5500-PoE also supports Q-in-Q VLAN tagging. This feature provides property system management the ability to isolate traffic by VLAN - VLAN, unicast - multicast, and port - port for the utmost in guest data delivery security and efficiency. This cost-effective, DMM-5500-PoE integrated solution delivers IP OTT communications, interactive guest services, and -based high-speed internet access (HSIA) over existing HFC and coaxial RF systems. Also, this versatile technology supports guest mobile devices with the addition of a wireless access point (WAP), and minimizes interconnect cabling and power requirements for cleaner, more reliable installations. 1 Gb LAN w/poe 1Gb LAN Port 2 Port 3 Port 1 10/100 LAN DMM-5500-PoE Port 1 10/100 LAN LG STB 5500 Features 3.0/2.0 Compliant Modem Designed to mate with the LG STB 5500 Built-in CATV Signal Splitter PoE and integrated Ethernet switch for Wireless Access Point (WAP) compatibility Supports Q-in-Q VLAN tagging for guest data delivery security. Supports IEEE 802.1q transparent bridging among the STB and Ethernet networks Cost-effective solution for Lodging applications including: Hotel Guest Rooms, Cruise Ship Cabins, Assisted Living and Healthcare Facilities Ordering Information RF In RF Out Cable Input Model Stock # Description DMM-5500-PoE 2332A Modem Module with PoE and Ethernet Switch

11 Model: DMM-5500-PoE Application and Specifications Hospitality, MDUs, and Campuses LAN with PoE Wireless Access Point (WAP) LG STB: GB LAN Faster and More Secure Laptop HDMI RF In DMM-5500-PoE Video/Voice/Data Sources BT-CMTS-3210 or BT-CMTS-3000 RF Cable Laptop / Mobile Devices RF Downstream RF Upstream Frequency Range: 108~1002 MHz () Demodulation: QAM 64/ QAM 256 Max. Data Rate: Up to 320 Mbps with 8DS channel bonding () Bandwidth: 6 MHz () Signal Level: -15~ 15 dbmv () Input Return Loss: > 7 db (108 ~ 1002 MHz) Standards/Connectivity/Interfaces Protocol Support: 3.0/2.0 Interfaces RF Ethernet CATV In: CATV Out: Port 1: Port 2: Port 3: CPEs Maximum number of CPEs: Filtering: Number of SIDs: 16 Frequency Searching Frequency Cache: Channel Plan: Alarms/Monitoring/Control Diagnostic LEDs: Management: Surge Protection: 1x F Type Female 1x F Type Female 1x Internal Connector (10/100) to LG-5500 STB 1x RJ45 (10/100/1000) with PoE 1x RJ45 (10/100/1000) without PoE 64 (64 MAC addresses) LLC: 16 IP: 32 5 Entries 1 MHz () DS, DS1, US, US1, STATUS, LINK CMTS Control On RF Input shall sustain at least 1 kv Frequency Range: 5 ~ 85 MHz ( 3.0) Modulation TDMA: QPSK, QAM 8, QAM 16, QAM 32, and QAM 64 S-CDMA: QPSK, QAM 8, QAM 16, QAM 32, QAM 64, and QAM 128 Max. Data Rate Bandwidth Signal Level QPSK: QAM 16: TDMA: S-CDMA: TDMA: S-CDMA: General Output Return Loss: Power: Power Dissipation: Mechanical Operating Temperature: Operating Humidity: Storage Temperature: Dimensions (W x H x D): Weight: 320, 640, 1280, 2560, 5120kbps 640, 1280, 2560, 5120, 10240kbps 200, 400, 800, 1600, 3200 and 6400 khz 1600, 3200 and 6400 khz +8 to +54 dbmv (QAM 32, QAM 64) +8 to +55 dbmv (QAM 8, QAM 16) +8 to +58 dbmv (QPSK) +8 to +53 dbmv (all modulations) Output level of CM can automatically be controlled by CMTS through power ranging function (1 db steps) > 7 db (5 ~ 85 MHz) 12 VDC from LG-5500 internal connector 18.5 W (Typical operation), W (Maximum) 32 to 104 F (0 to 40 C) 10% to 90% (Non-condensing) 14 to 122 F (-10 to 50 C) 4.44 x 1.13 x 7.25 in ( x x mm) 9.2 oz (260 g)

12 One Jake Brown Road, Old Bridge, NJ USA Phone: Fax: Blonder Tongue Laboratories, Inc. All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.