IP Video Router and TLR-DVR Controller (Video Web Server)

Transcription

1 IP Video Router and TLR-DVR Controller (Video Web Server) Instruction Manual English Version 1.0 MODEL: L Copyright 2006 LOREX Technology Inc.

2 FAQ Guide Overview The following questions are addressed in this FAQ Guide. 1. What is the function of the L4202? 2. What other components do I need? 3. Do I need a PC? 4. How do I connect my L4202 directly to my PC? 5. Can I connect to my L4202 over the Internet? 6. Can I connect my L4202 directly to my Modem? 7. Does the L4202 support a Dynamic IP? 8. Does the L4202 support a Dynamic IP? 9. Why can t I connect to my unit? 10. I am still unable to connect to my unit 11. I cannot view data burned to a CD on another PC 12. Where can I get the Video Server software? 13. I am having difficulties connecting, and have a Linksys Router If you have any additional questions or technical issues, please contact the Sentinel CCTV Help desk for further assistance at (Option 1-1) or mail your questions to support@strategicvista.com 2

3 1. What is the function of the L4202? I need to use a Non-networkable device on a network. Is the L4202 the product for me? The L4202 is a networkable device which enables any standalone device (i.e. DVR, Observation System) to work as a networkable product. 2. What other components do I need? I would like to use this device. What other components do I need? In order to use the L4202, you will need the following components: A Router - this is required to connect the L4202 to your home or business network. A High Speed Internet Connection - used for remote connection to your device. Once the device is connected to the router, please refer to the L4202 User Manual for further configuration instructions. Ports on the router may also need to be forwarded - please refer to the User Manual for your specific brand of Router for details. 3. Do I need a PC? Will I need a dedicated PC for this product? No - You do not need to have a dedicated computer for this device, however you will need to have a computer for the initial setup of the L How do I connect my L4202 directly to my PC? An RJ-45 cable (network cable) is included with unit - is this the cable to connect my device to my PC? The supplied RJ-45 cable is a Crossover Cable - this cable is used to connect the L4202 directly to a PC in order to configure the unit. This cable is not designed to connect the L4202 to your router. 3

4 5. Can I connect to my L4202 over the Internet? Can I connect to this device over the Internet? Yes, you can connect to the device once it is configured correctly (Settings, IP Address, etc.), and as long as you have an active High Speed Internet connection. 6. Can I connect my L4202 directly to my Modem? I do not have a router, and would like to connect my L4202 directly to my Modem - what kind of Internet connection will I need for this? Connection directly to your Modem will depend on the internet connection type: DSL High Speed: The L4202 does not a direct connection to a DSL Modem. The technology for the DSL Model (PPPoE) prevents a direct connection. A router must be used between your DSL line and L4202. Cable High Speed: Yes, the L4202 can be directly connected to a Cable Modem. 7. Does the L4202 support a Dynamic IP? I would like to let my unit get an IP address from my router - can it do this? No, the L4202 only supports static IP Addresses. You will need to configure the Network settings as per the User Manual. 8. Does the L4202 support a Dynamic IP? I would like to let my unit get an IP address from my router - can it do this? No, the L4202 only supports static IP Addresses. You will need to configure the Network settings as per the User Manual. 4

5 9. Why can t I connect to my unit? I have configured my unit as per the Quick Start Guide and Manual, but I am still unable to connect. What could cause this? There may be several reasons why the connection cannot be established: Make sure after the initial configuration has been completed, you use a regular CAT5 Network (ethernet) cable. This means that you cannot use the cable came with the unit, as the cable provided with the unit is a Crossover cable (meant to connect the unit directly to the PC) Check that the IP address and Subnet mask are correct. Check the cable connections at both the unit and the router. Try swapping in a known good cable. Check the username and password (password is case sensitive) Check the port number (port number by default is 80) 10. I am still unable to connect to my unit I have tried the troubleshooting steps listed in Question 9, but am still unable to connect to my unit. What should I do? Try resetting the unit and starting again from Factory Defaults. The reset button is located on the bottom of the unit. You may need to contact Technical Support if you are unable to locate the reset button. 11. I cannot view data burned to a CD on another PC I have recorded video on my PC, but when I copied the video to a CD and attempted to view the previously recorded data, I was unable to view it. Why is that You will need to install the software that came with the Video Server unit on any PC which you wish to view previously recorded data at. 5

6 12. Where can I get the Video Server software? I do not have my Installation CD - where can I get the Video Server software? Open Internet Explorer, and enter the IP address of your device. You will get a login screen - do not enter the user name and password - instead, select the button with Application Download written on it. This will allow you to download and install the software without the CD. 13. I am having difficulties connecting, and have a Linksys Router I am having difficulties connecting to the Video unit, and I have a Linksys Router. Is there additional settings that I need to complete? Once you are connected to the local network, you have to change the default gateway from to (if you are using Linksys) to view remotely. Open a Command Prompt window by clicking on the Windows Start button, selecting the Run option, and typing in CMD (and pressing the enter button on the keyboard). Type IPCONFIG in the Command Prompt window, and confirm the IP address and default gateway. Try changing the IP address from to anything between and If this still does not help, change the port number from 80 to something like 1000 and don't forget to forward it accordingly. 6

7 It s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades VISIT Strategic Vista International Inc. wwwlorexcctv.com

8