Ethernet I/O Products

Transcription

1 .. Overview P--.2. Modbus TCP I/O Expansion Unit P-2-.. ET-7000/PET-7000/PET V Series (Web based) P--.4. PEE-7000/PEE V Series (Web based) P tet/tpet Series Modules (IP based) P EtherCAT Products P EtherNet/IP Products P PROFINET Products P Ethernet/Fiber Switch P-9-

2 Overview.. Overview Although the RS-485 remote I/O module is still selling well, we found more and more demand of Ethernet based remote I/O modules. Our Ethernet remote I/O modules support Modbus TCP, Modbus UDP protocol. We also provide web HMI, Web server, OPC server, security mechanism..etc. According to different application, we have developed various Ethernet I/O units and modules, such as compact size ET- 87Pn-MTCP (ch.2), palm-size ET-7000/PET-7000/PET V series (ch.), PET-7000/PEE V series (ch.4) and tiny-size tet/ tpet series (Ch.5). The module has diversi ed I/O interface, such as overvoltage-protection analog input module, relay output, digital input/output, counter, timer etc. The brief comparison is as the following table. Besides those regular Ethernet I/O modules, we will release EtherCAT, Ethernet/IP and PROFINET I/O modules. Model Name tet/tpet Series ET-7000 PET-7000 PET V PEE-7000 PEE V Pictures Communication Ethernet 0/00 M, RJ-45 x 0/00 M, RJ-45 x 2 Protocol Modbus TCP, Modbus UDP Security Web Password and IP Filter ID, Password and IP Filter Max. Sockets 5 2 Web Server User-de ned Web pages - (Web HMI) I/O I/O pins 0 pins 2 pins 26 pins DI Counter 2-bit,.5 khz 2-bit, 500 Hz Pair Connection (Polling/Push Mode) (Polling Mode) Mechanical Dimensions (W x L x D) 52 mm x 98 mm x 27 mm 72 mm x 2 mm x 5 mm 76 mm x 20 mm x 8 mm Further more, we also developed ET-87Pn-MTCP, a series of Ethernet remote I/O unit for compact and modular I/O expansion. It comprises a CPU, a power module and a backplane with a number of I/O slots for flexible I/O configuration. For more details of the available modules (I-87K series) for ET-87Pn-MTCP, refer to PAC Product Catalog -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

3 Remote I/O Modules and I/O Expansion Units.2. Modbus TCP I/O Expansion Unit Features Two Ethernet Ports for Daisy-Chain Topology Supports Modbus TCP Supports Modbus RTU/ASCII Supports Modbus TCP to RTU Gateway Auto Configuration ET-87P4-MTCP Introduction ET-87P8-MTCP 4/8 I/O Slots for I-87K Series Modules Operating Temperature: -25 ~ +75 C ET-87Pn-MTCP series is a Modbus TCP I/O expansion unit to expand I-87K series I/O modules over the Ethernet for industrial monitoring and controlling applications. It offers two Ethernet switch ports for daisy-chain topology. The daisy-chain feature allows ET-87Pn to connect in series to each other or other Ethernet devices. Users can easily simplify the cabling and save installation space with the feature. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (0 ~ 0 VDC), isolated power input and can operate under wide temperature (-25 ~ +75 C). There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, DI counter modules. To simplify installation and maintenance of I/O modules, it provides many useful features, such as: auto configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power on and safe values for safety. Modbus is a very wide known protocol in the industrial manufacturing and environment monitoring fields. Many SCADA software, HMI and PLC has builtin driver to support Modbus devices. Besides, we also provide SDK on different platforms, such as Windows XP, Window CE 5.0/6.0, Linux, MiniOS7. Therefore, it is very easy to integrate remote I/O to customer s applications. 2 System Speci cations Models ET-87P4-MTCP ET-87P8-MTCP Communication Ports Modbus TCP Slave Protocol Modbus RTU/ASCII Slave Modbus TCP to RTU Gateway Ethernet COM RJ-45 x 2, 0/00 Base-TX (Auto negotiating, Auto MDI/MDI-X, LED indicators) RS-22 (to update rmware) (RxD, TxD and GND); non-isolated SMMI LED Display, 5-Digit LED Display Push Buttons 4 I/O Expansion Slots Slot Number 4 8 Note: For High Pro I-87K Modules Only Mechanical Dimensions (W x H x D) 88 mm x 2 mm x mm 2 mm x 2 mm x mm Installation DIN-Rail or Wall Mounting Environmental Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Ambient Relative Humidity 0 ~ 90% RH (non-condensing) Power Input Range Isolation Redundant Power Inputs Capacity +0 ~ +0 VDC kv 0 W Consumption 2 W 2.4 W Website: sales@icpdas.com Vol. RIO

4 ET-7000/PET-7000/PET V Series (Web based).. ET-7000/PET-7000/PET V Series (Web based) Introduction The ET-7000/PET-7000, a web-based Ethernet I/O module, features a Built-in web server which allows con guration, I/O monitoring and I/O control by simply using a regular web browser. Remote control is as easy as sur ng the Internet. Features. Power over Ethernet (PoE) Besides Web HMI function, no more programming or HTML skills are required; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The ET-7000/PET-7000 offers easy and safe access for users from anytime and anywhere! In addition, the ET-7000/PET-7000 also supports Modbus TCP protocol that makes perfect integration to SCADA software. Furthermore, PET-7000 features PoE that not only Ethernet but also power is carried through an Ethernet cable. This feature makes installation of PET-7000 a piece of cake. Imagine that no more unnecessary wires, only an Ethernet cable takes care of everything in the eld. The PET-7000 series module can be powered by an IEEE802.af compliant PoE switch. Both Ethernet and power can be carried by an Ethernet cable eliminating the need for additional wiring and power supply. 2. Communication Security Account and password are needed when logging into the ET-7000 web server. An IP address filter is also included, which can be used to allow or deny connections with specific IP addresses.. Support for both Modbus TCP and Modbus UDP Protocols The Modbus TCP, Modbus UDP slave function on the Ethernet port can be used to provide data to remote SCADA software. 4. Built-in I/O Various I/O components are mixed with multiple in a single module, which provides the most cost effective I/O usage and enhances performance of the I/O operations. 5. Dual Watchdog The Dual Watchdog is consists of a Module Watchdog and a Communication Watchdog. The action of AO,DO are also associated to the Dual Watchdog. Module Watchdog is a built-in hardware circuit to monitor the operation of the module and will reset the CPU if a failure occurs in the hardware or the software. Then the Power-on Value of AO,DO will be loaded. Communication Watchdog is a software function to monitor the communication between the host and the ET-7000/PET-7000 module. The timeout of the communication Watchdog is proprgrammable, when the ET-7000/PET-7000 doesn't receive commands from the host for a while, the watchdog forces the AO,DO to pre-programmed Safe Value to prevent unpredicatable damage of the connected devices. -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

5 Remote I/O Modules and I/O Expansion Units 6. Highly Reliable UnderHarsh Environmen Wide Operating Temperature Range: -25 ~ +75 C Storage Temperature: -0 ~ +80 C Humidity 0 ~ 90% RH (Non-condensing) 7. Power-on Value and Safe Value Besides setting by the set AO,DO commands, the AO,DO can be set under two other conditions. Power-on Value: The Power-on Value is loaded into the AO,DO under conditions: Power-on, reset by Module Watchdog, reset by reset command. Safe Value: When the Communication Watchdog is enabled and a Communication Watchdog timeout occurs, the safe value is loaded into the AO,DO. 8. I/O Pair Connection This function is used to create a AI/DI to AO/DO pair through the Ethernet. Once the configuration is completed, the ET-7000/ PET-7000 module can poll the status of remote AI/DI devices and then use the Modbus TCP protocol to continuously write to a local AO/DO in the background. 9. Web HMI The Web HMI function allows the users to create dynamic and attractive web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif format) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages. 0. Built-in Web Server Each ET-7000/PET-7000 module has a Built-in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser.. Dimensions (Units: mm) Top View Front View Left Side View Right Side View Rear View Bottom View Website: sales@icpdas.com Vol. RIO

6 ET-7000/PET-7000/PET V Series (Web based) Software Support Our free charge software utility and development kit include. OPC Server NAPOPC_ST DA Server is a free OPC DA Server ("OPC" stands for "OLE for Process Control" and "DA" stands for "Data Access") for ICP DAS products. Based on Microsoft's OLE COM (component object model) and DCOM (distributed component object model) technologies, NAPOPC_ST DA Server defines a standard set of objects, interfaces and methods for use in process control and manufacturing automation applications to facilitate the interoperability. Using NAPOPC_ST DA Server, system integrates data with SCADA/HMI/Database software on the same computer and others. SCADA/HMI/Database sends a request and NAPOPC DA Server ful lls the request by gathering the data of ICP DAS modules (License Free) and third-party devices (License Charge) to SCADA/HMI/Database. For different OS of PAC products, ICP DAS provides several professional DA Servers: Version NAPOPC_ST NAPOPC_XPE NAPOPC_CE5 NAPOPC_CE6 Platform Desktop Windows Windows XP Embedded Windows CE5 Windows CE6 Price Free/ Free Free Free For more Information please visit 2. EZ Data Logger EZ Data Logger is the software that ICP DAS provides for users to easily build a small SCADA system on Windows 2000/XP/Vista. It comes with two versions, "Lite" & "Professional". The Lite version is not only fullfunctioned but free to all ICP DAS users! EZ Data Logger is a small data logger software. It can be applied to small remote I/O system. With its userfriendly interface, users can quickly and easily build a data logger software without any programming skill.. Modbus Software Development Toolkits Plenty of library functions and demo programs are provided to let user develop programs easily under Windows, Linux and MiniOS7 operating systems. OS Development Language SDK MiniOS7 TC, BC MBT7_xxx.lib, MBT8_xxx.lib and Demos WinCE 5.0/6.0 VS.NET 2005/2008 nmodbusce.dll and Demos WES 2009, Windows XP/Vista/7 VS.NET 2005/2008 LabView nmodbus.dll and Demos Demos Linux C Libraries and Demos -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

7 Remote I/O Modules and I/O Expansion Units Difference between ET-7000, PET-7000 and PET V Website: Vol. RIO

8 ET-7000/PET-7000/PET V Series (Web based) Selection Guide Analog Input Model Model Name ET-7005 PET-7005 PET V AI DO Channel Voltage and Current Input Sensor Input Channel Type Sink/Source 8 - Thermistor 4 Open Collector Sink ET-705 PET-705 PET V 7 - RTD: Pt00, Pt000, Ni20, Cu00, Cu ET-707 PET-707 PET V 8 +/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma, 4 ~ 2 0mA - 4 Open Collector Sink ET PET PET V ET-708Z PET-708Z PET-708Z-48V ET-709 PET-709 PET V ET-709Z PET-709Z PET-709Z-48V 0/20 0 +/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma, 4 ~ 20 ma +/-5 mv, +/-50 mv, +/-00 mv, +/-500 mv, +/- V, +/-2.5 V +/-20 ma, 0 ~ 20 ma, 4 ~ 20 ma Thermocouple: J, K, T, E, R, S, B, N, C, L, M, 6 Open Collector Sink and L DIN /-5 mv, +/-50 mv, +/-00 mv, 4 Thermocouple: +/-50 mv, +/-500 mv, J, K, T, E, R, S, B, N, C, L, M, +/- V,+/-5 V, +/-0 V and L DIN /-20 ma, 0 ~ 20 ma, 4 ~ 20 ma 6 Open Collector Sink Note: We recommend to choose ET-708Z/PET-708Z and ET-709Z/PET-709Z for extremely accurate thermocouple measurement. Multi-function I/O Model Name ET-7002 PET-7002 PET V ET-706 PET-706 PET V ET-7026 PET-7026 PET V Channel 2 6 Voltage and Current Input +/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +0 ma ~ +20 ma, +/-20 ma, 4 ~ 20 ma +/-5 mv, +/-50 mv, +/-00 mv, +/-500 mv, +/- V, +/-2.5 V, 0 ~ 20 ma, +/-20 ma, 4 ~ 20mA +/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, 0 ~ 20 ma, +/-20 ma, 4 ~ 20mA AI AO DI/Counter DO Sensor Input Channel Voltage and Current Output Strain Gague, Load Cell, Full-Bridge, Half-Bridge, Quarter-Bridge (Note) ~ 0V 2 0 ~ 5 V, +/-5 V, 0 ~ 0 V, +/-0 V, 0 ~ 20 ma, 4 ~ 20 ma Channel Contact Channel Type 2 Wet (Sink,Source) Wet (Sink,Source) Dry (Source), Wet (Sink,Source) 2 2 Power Relay (Form A) Open Collector (Sink) Open Collector (Sink) Note: The AO is con gured as a volage excitation source for the strain gauge. --5 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

9 Remote I/O Modules and I/O Expansion Units Digital I/O Model Name DI/Counter Channel Contact Sink/Source Channel Type Sink/Source Max. Load 25 C DO ET-7042 PET-7042 PET V Open Collector Sink 00 ma/channel ET-7044 PET-7044 PET V ET-7050 PET-7050 PET V 8 Wet Sink, Source 8 Open Collector Sink 00 ma/channel 2 Wet Sink, Source 6 Open Collector Sink 00 ma/channel ET-705 PET-705 PET V ET-7052 PET-7052 PET V ET-705 PET-705 PET V 6 Wet Sink, Source Wet Sink, Source 8 Open Collector Source 650 ma/channel 6 Dry Source ET-7055 PET-7055 PET V 8 Dry, Wet Sink, Source 8 Open Collector Source 650 ma/channel Relay Output & Digital Input Model Name Relay Output DI/Counter Channel Relay Type Max. Load 25 C Channel Contact Sink/Source ET-7060 PET-7060 PET V 6 Power Relay Form A (SPST N.O.) 5.0 A/channel 6 Wet Sink, Source ET-7062 PET-7062 PET V 2 Power Relay Form C (SPDT) 5.0A, TV-5 rated/channel 6 Wet Sink, Source ET-7065 PET-7065 PET V 6 PhotoMOS Relay Form A.0 A/channel 6 Wet Sink, Source ET-7066 PET-7066 PET V 8 PhotoMOS Relay Form A.0 A/channel ET-7067 PET-7067 PET V 8 Power Relay Form A (SPST N.O.) 5.0 A/channel Website: sales@icpdas.com Vol. RIO

10 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7002 PET-7002 PET V -channel Analog Input and DIO Module Built-in I/O AI: Channels with 240 Vrms Overvoltage Protection DI/Counter: 6 Channels Power Relay: Channels Introduction The ET-7002/PET-7002/PET V is a multi-function module with -channel analog inputs, 6-channel digital inputs and -channel relay outputs. It provides various programmable analog inputs (+/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma and 4 ~ 20 ma). Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. Each analog input/output can be programmed to accept current or voltage as input/output depending upon the position of corresponding jumper. The ET-7002/PET-7002 is fully RoHS-compliant and has quali cation for 4 kv ESD protection as well as 2500 VDC intra-module isolation. System Speci cations Models ET-7002 PET-7002 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Surge (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption.7 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --7 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

11 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Analog Input Channels Type Individual Channel Con guration Resolution Sampling Rate Accessories NS-205A CR NS-205PSE CR NS-205PSE-24V CR MDR CR Normal Mode Fast Mode Normal Mode Fast Mode DIN-KA52F-48 CR (Differential) +/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V +0 ma ~ +20 ma, +/-20 ma, 4 ~ 20 ma (jumper selectable) 6-bit 2-bit 0 Samples/Second (Total) 60 Samples/Second (Total) Normal Mode +/-0.% Accuracy Fast Mode +/-0.5% or better Zero Drift +/-20 V/ C Span Drift +/-25 ppm/ C Overvoltage Protection 240 Vrms Overcurrent Protection 50 ma Max. at 0 VDC/VAC Max. Voltage 2 M Input Impedance Current 25 Common Mode Rejection 86 db Min. Normal Mode Rejection 00 db Digital Input/Counter Channels 6 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 K, 0.5W Channels 6 Counters Max. Count 4,294,967,285 (2-bit) Max. Input Frequency 00 Hz Min. Pulse Width 5 ms Overvoltage Protection +50 VDC Power Relay Channels Type Power Relay, Form A (SPST N.O.) Operating Voltage Range 250 VAC/0 VDC Max. Load Current 5.0A/channel at 25 C Operate Time 6 ms (Typical) Release Time ms (Typical) Electrical Life ( Resistive load ) VDE: VAC 0,000 ops (0 ops/minute) at 75 C. 5 0 VDC 70,000 ops (0 ops/minute) at 75 C VAC/0 VDC 6,000 ops. UL: 250 VAC/0 VDC 00,000 ops. Mechanical Life 20,000,000 ops. at no load (00 ops./minute). Intra-module Isolation, Field-to-Logic 750 VDC Power-on Value, Programmable Safe Value, Programmable Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Ordering Information ET-7002 CR PET-7002 CR 2 PET V CR IN 5 IN 4 IN IN 2 IN IN 0 RL2 COM RL2 NO RL COM RL NO RL0 COM RL0 NO Wire Connections + mv/v V - Digital Input/ Counter Sink Source Power Relay Relay Output PET-7002: PoE PET V: PoE Voltage Input JUMPER DI.COM - + DI.COM AC/DC Vin+ Vin- Vin- 0 Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC DIx +0 ~ +50 VDC OPEN or <4 VDC DIx ON State Readback as RLx.COM LOAD RLx.NO Vin 0+ Vin 0- Vin + Vin - Vin 2+ Vin 2- (R)+Vs Default Relay Close + ma - -channel Analog Input and DIO Module (RoHS) Current Input JUMPER DIx DI.COM OFF State Readback as 0 -channel Analog Input and DIO Module with PoE (RoHS) -channel Analog Input and DIO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) - + DIx DI.COM AC/DC RLx.COM LOAD 9 ET-7002: +0 ~ +0 VDC PET-7002: +2 ~ +48 VDC Input Vin 0+ Vin 0- Vin + Vin - Vin 2+ Vin 2- (R)+48V Out 9 PET V: +48 VDC Output RLx.NO Vin+ Relay Open Website: sales@icpdas.com Vol. RIO

12 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7005 PET-7005 PET V 8-channel Thermistor Input and DO Module Built-in I/O Thermistor Input: 8 Channels DO: 4 Channels Introduction ET-7005/PET-7005/PET V is used for measuring temperature by the thermistor. It supports many kinds of thermistors and features individual channel configuration which means that eight of its input can individually be configured with different kind of thermistor and supports user-defined types by specifying the Steinhart coefficients to add other thermistors, if necessary. Besides, ET-7005/PET-7005 also has 4-channel digital outputs for alarm output with Short-circuit protection and overload protection. Adding 2500 VDC intra-module isolation and 0 VDC/VAC overvoltage protection for thermistor on ET-7005/PET-7005 makes itself running with higher reliability. System Speci cations Models ET-7005 PET-7005 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2. W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --9 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

13 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Thermistor Input Channels Sensor Type (thermistor) Individual Channel Con guration Resolution Sampling Rate Accuracy Zero Drift Span Drift Overvoltage Protection 8 (Differential) Precon ST-A, Fenwell U, YSI L00, YSI L00, YSI L000, YSI B2252, YSI B000, YSI B5000, YSI B6000, YSI B0000, YSI H0000, YSI H0000, User-de ned 6-bit 0 Sample/Second (Total) +/-0.% or better +/-20 V/ C +/-25 ppm/ C 0 VDC/VAC Common Mode Rejection 86 db Normal Mode Rejection 00 db Open Wire Detection Digital Output Channels 4 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 700 ma/channel Load Voltage 5 VDC ~ 50 VDC Overvoltage Protection 60 VDC Overload Protection.4 A Short-circuit Protection Power-on Value, Programmable Safe Value, Programmable B6 2 A6 B5 A5 PET-7005: PoE B4 A4 B A B2 A2 B A B0 A0 0 9 A7 B7 DO0 DO DO2 DO ISO.GND (R)+Vs A7 B7 ET-7005: +0 ~ +0 VDC PET-7005: +2 ~ +48 VDC Input DO0 DO DO2 DO ISO.GND (R)+48V Out 9 PET V: PoE PET V: +48 VDC Output Wire Connections Thermistor Input Bx Ax Digital Output ON State Readback as OFF State Readback as 0 Open Collector (Sink) LOAD DOx ISO.GND LOAD DOx ISO.GND 5 ~ 50 VDC 5 ~ 50 VDC Ordering Information ET-7005 CR PET-7005 CR PET V CR 8-channel Thermistor Input and DO Module (RoHS) 8-channel Thermistor Input and DO Module with PoE (RoHS) 8-channel Thermistor Input and DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

14 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET channel RTD Input Module PET-705 PET V Built-in I/O RTD Input: 7 Channels Introduction ET-705/PET-705/PET V is specifically designed for long-distance RTD measurement. It features automatic compensation for three-wire RTD regardless of the length of wires and provides open wire detection for RTD measurement. ET-705/PET-705 offers 7, each of which could be connected with different kinds of RTD (Pt00, Pt000, Ni20, Cu00, Cu000). Also, ET-705/PET-705 is fully RoHS-compliant and has qualification for 4 kv ESD protection as well as 2500 VDC intra-module isolation. System Speci cations Models ET-705 PET-705 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.0 W 2.6 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

15 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments RTD Input Channels Sensor Type Wire Connections 7 (Differential) Pt00, Pt000, Ni20, Cu00, Cu000 2/ wire Individual Channel Con guration Resolution 6-bit Sampling Rate 2 Samples/Second (Total) Accuracy +/-0.05% Zero Drift +/-0.5 V/ C Span Drift +/-20 V/ C Common Mode Rejection 50 db Normal Mode Rejection 00 db Input Impedance >M Open Wire Detection -wire RTD Lead Resistance Elimination 2 RTD5+ RTD5 - AGND RTD6+ RTD6 - AGND N.C. (R)+Vs 9 0 PET-705: PoE RTD5+ RTD5 - ET-705: +0 ~ +0 VDC PET-705: +2 ~ +48 VDC Input AGND RTD6+ RTD6 - AGND N.C. (R)+48V Out 9 PET V: PoE PET V: +48 VDC Output Wire Connections Open Collector (Sink) CH0,, 2, 5 and 6 CH and CH4 2-wire of RTD RTDx+ AGND -wire of RTD RTDx+ AGND RTD4+ RTD4 - AGND RTD - RTD+ AGND RTD2 - RTD2+ AGND RTD - RTD+ AGND RTD0- RTD0+ RTDx- RTDx- RTD+ RTD- AGND RTD4- RTD4+ RTD+ RTD- AGND RTD4- RTD4+ Ordering Information ET-705 CR PET-705 CR PET V CR 7-channel RTD Input Module (RoHS) 7-channel RTD Input Module with PoE (RoHS) 7-channel RTD Input Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

16 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection Built-in I/O ET-706 PET-706 PET V 2-channel Strain Gauge and DIO Module Strain Gauge Input: 2 Channels DI/Counter: 2 Channels DO: 2 Channels Introduction The ET-706/PET-706/PET V is a strain gauge module with 2 analog input, excitation voltage output channel, 2 digital input and 2 digital output module. It provides various programmable analog input inputs (+/- mv, +/-50 mv, +/-00 mv, +/-500 mv, +/- V, and +/-2.5 V) and supports full-bridge, half-bridge, and quarter-bridge. The range for each analog input is allowed to be configured individually. Excitation voltage output can be in the range of 0 ~ 0 V with a 60 ma driving efficiency. Digital outputs can also be set as alarm outputs. The ET-706/PET-06 can also provide long-distance strain gauge measurement that compensates for the loss of voltage resulting from long-distance measurements. System Speci cations Models ET-706 PET-706 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 4.2 W 5. W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

17 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Strain Gauge Input Channels Type 2 (Differential) +/-5 mv, +/-50 mv, +/-00 mv, +/-500 mv, +/- V, +/-2.5 V, +/-20mA, 0 ~ 20 ma, 4 ~ 20 ma Strain Gauge Type Full-Bridge, Half-Bridge, and Quarter-Bridge Individual Channel Con guration Resolution 6-bit Sampling Rate 0 Samples/Second (Total) Accuracy +/-0.05% Zero Drift +/-0.5 V/ C Span Drift +/-25 ppm/ C Overvoltage Protection 0 VDC Input Impedance Voltage Input: >400 k, Current Input: 25 Common Mode Rejection 50 db min. Normal Mode Rejection 00 db Excitation Voltage Output Channels Output Range 0 ~ 0 V Max. Output Load Current 60 ma Accuracy +/-0.05% of FSR Drift +/-50 ppm/ C Power-on Value Digital Input/Counter Channels 2 Contact Wet Sink/Source (NPN/PNP) Sink/Source Off Voltage Level + VDC Max. On Voltage Level +.5 VDC ~ +50 VDC Channels 2 Counters Max. Count 4,294,967,285 (2-bit) Max. Input Frequency 00 Hz Min. Pulse Width 5 ms Overvoltage Protection 70 VDC Digital Output Channels 2 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 700 ma/channel Load Voltage +5 VDC ~ +50 VDC Overvoltage Protection 60 VDC Overload Protection.4 A Short-circuit Protection Power-on Value, Programmable Safe Value, Programmable Ordering Information ET-706 CR PET-706 CR Exc - 2 Sense - PET V CR Iin - Vin - PET-706: PoE PET V: PoE Vin+ Sense+ DI0 Excitation Voltage Exc+ DI Exc0 - DI.COM Sense0 - DO0 Iin0 - DO Vin0 - Vin0+ DO.PWR DO.GND Sense0 + Exc (R)+Vs ET-706: +0 ~ +0 VDC PET-706: +2 ~ +48 VDC Input DI0 DI DI.COM DO0 DO DO.PWR DO.GND (R)+48V Out Strain Gauge Quarter-Bridge Half-Bridge Full-Bridge 20 R 7.0 V 7.0 V.5 V 50 R 0 V 0 V 0 V 9 PET V: +48 VDC Output 2-channel Strain Gauge and DIO Module (RoHS) 2-channel Strain Gauge and DIO Module with PoE (RoHS) 2-channel Strain Gauge and DIO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Wire Connections Bridge Sensor/Load Cell/Strain Gauge Full Bridge Half Bridge Quarter Bridge Vin+ Vin- Exc + Sense+ Sense - Exc - Voltage Input + mv/v V - Vin+ Vin+ Vin- VinmA - Exc + Exc + Sense+ Sense+ Sense - Sense - Exc - Exc - Customer Supplied Analog Input Current Input Vin+ + Vin+ Vin- Vin- Iin- Analog Output Volt-Meter - + V Exc + Sense+ Sense - Exc - - Digital Input/ Counter Sink Source Output Type Drive Relay Resistance Load + - DI.COM - + DIx DIx DI.COM Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC DO.PWR DOx DO.GND DO.PWR DOx DO.GND + - DI.COM - + DIx DIx DI.COM +0 ~ +50 VDC OPEN or <4 VDC ON State Readback as OFF State Readback as 0 DO.PWR DOx DO.GND DO.PWR DOx DO.GND Website: sales@icpdas.com Vol. RIO

18 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-707 PET-707 PET V 8-channel Analog Input and 4-channel DO Module Built-in I/O AI: 8 Channels with 240 Vrms Overvoltage Protection DO: 4 Channels Introduction The ET-707/PET-707/PET V is a 6-bit module with 8-channel differential analog inputs and 4-channel digital ouputs. It provides programmable input range on all analog (+/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma and 4 ~ 20 ma) and digital output can be set alarm output with Short-circuit protection and overload protection. Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Each analog input can be programmed to accept voltage or current as input depending upon the position of corresponding jumper. The sampling rate of ET-707/PET-707 is changeable; there are fast mode and normal mode for your consideration. ET-707/PET-707 also has qualification for 4 kv ESD protection as well as 000 VDC intra-module isolation. System Speci cations Models ET-707 PET-707 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.6 W. W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --5 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

19 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Analog Input Channels Type Individual Channel Con guration Resolution Sampling Rate Normal Mode Fast Mode Normal Mode Fast Mode 8 (Differential) +/-50 mv, +/-500 mv, +/-V, +/-5V, +/-0V +/-20 ma, 0 ~ 20 ma, 4 ~ 20 ma (Jumper Selectable) 6-bit 2-bit 0 Samples/Second (Total) 60 Samples/Second (Total) Normal Mode +/-0.% Accuracy Fast Mode +/-0.5% or better Zero Drift +/-20 V/ C Span Drift +/-25 ppm/ C Overvoltage Protection 240 Vrms Input Voltage 2 M Impedance Current 25 Common Mode Rejection 86 db Min. Normal Mode Rejection 00 db Digital Output Channels 4 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 700 ma/channel Load Voltage 5 VDC ~ 50 VDC Overvoltage Protection 60 VDC Overload Protection.4 A Short-circuit Protection Power-on Value, Programmable Safe Value, Programmable Vin6-2 Vin6+ Vin5 - Vin5+ PET-707: PoE PET V: PoE Vin4 - Vin4+ Vin - Vin+ Vin2 - Vin2+ Vin - Vin+ Vin0 - Vin Vin7+ Vin7 - DO0 DO DO2 DO ISO.GND (R)+Vs ET-707: +0 ~ +0 VDC PET-707: +2 ~ +48 VDC Input Vin7+ Vin7 - DO0 DO DO2 DO ISO.GND (R)+48V Out 9 PET V: +48 VDC Output Wire Connections Voltage Input JUMPER Current Input JUMPER + mv/v - V Vin+ Vin- Vin+ Vin- Default + ma - Digital Output ON State Readback as OFF State Readback as 0 Open Collector (Sink) LOAD DOx ISO.GND LOAD DOx ISO.GND 5 ~ 50 VDC 5 ~ 50 VDC Ordering Information ET-707 CR PET-707 CR PET V CR 8-channel Analog Input and 4-channel DO Module (RoHS) 8-channel Analog Input and 4-channel DO Module with PoE (RoHS) 8-channel Analog Input and 4-channel DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

20 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET PET PET V 0/20-channel Analog Input Module Built-in I/O AI: 0/20 Channels with 240 Vrms Overvoltage Protection Introduction The ET is a 6-bit, module with 0-channel differential or 20-channel single-ended analog inputs. It provides programmable input range on all analog (+/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma and 4 ~ 20 ma). Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Each analog input can be programmed to accept voltage or current as input depending upon the position of corresponding jumper. The sampling rate of ET-707/PET-707/PET V has two modes; fast mode and normal mode for your consideration. ET-707/PET-707/PET V also has qualification for 4 kv ESD protection as well as 000 VDC intra-module isolation. System Speci cations Models ET PET PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.6 W.8 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --7 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

21 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Analog Input Channels Type Individual Channel Con guration Resolution Sampling Rate Accuracy Zero Drift Span Drift Overvoltage Protection Normal Mode Fast Mode Normal Mode Fast Mode 0 differential or 20 single-ended (Note), software selectable +/-50 mv, +/-500 mv, +/-V, +/-5V, +/-0V +/-20 ma,0 ~ 20 ma, 4 ~ 20 ma (Jumper Selectable) 6-bit 2-bit 0 Samples/Second (Total) 60 Samples/Second (Total) Normal Mode +/-0.% Fast Mode +/-0.5% or better +/-20 V/ C +/-25 ppm/ C Differential Single-ended 240 Vrms 50 Vrms Voltage 2 M (Differential), M (Single-ended) Input Impedance Current 25 Common Mode Rejection 86 db Min. Normal Mode Rejection 00 db Note: Differential mode can be used for voltage input and current input. Single-Ended mode can be used for voltage input only. Vin6-/Vin6+ 2 Vin6+ Vin5-/Vin5+ Vin5+ PET-707-0: PoE Vin4-/Vin4+ Vin4+ Vin7+ Vin-/Vin+ Vin7-/Vin7+ Vin+ Vin8+ Vin2-/Vin2+ Vin8-/Vin8+ Vin2+ Vin9+ Vin-/Vin+ Vin+ Vin9-/Vin9+ AGND Vin0-/Vin0+ Vin (R)+Vs ET-707-0: +0 ~ +0 VDC PET-707-0: +2 ~ +48 VDC Input 9 Vin7+ Vin7-/Vin7+ Vin8+ Vin8-/Vin8+ Vin9+ Vin9-/Vin9+ AGND (R)+48V Out PET V: PoE PET V: +48 VDC Output Wire Connections Accessories Voltage Input Input (Differential Mode) + mv/v - V JUMPER Vin+ Default Vin- Voltage Input Input (Single-ended Mode) NS-205A CR NS-205PSE CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) + mv/v - V Vin+ AGND JUMPER Default NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) Current Input Input JUMPER MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) + ma - Vin+ Vin- DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Ordering Information ET PET PET V 0/20-channel Analog Input Module (RoHS) 0/20-channel Analog Input Module with PoE (RoHS) 0/20-channel Analog Input Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

22 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-708Z ET-709Z Introduction PET-708Z PET-708Z-48V PET-709Z PET-709Z-48V 0-channel Thermocouple Input Module Built-in I/O Thermocouple Input: 0 Channels (For ET-708Z/PET-708Z/PET-708Z-48V) AI: 0 Channels with 240 Vrms Overvoltage Protection (For ET-709Z/PET-709Z/PET-709Z-48V) DO: 6 Channels The Z version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-708Z/PET-708Z/PET-708Z-48V/ET-709Z/PET-709Z/PET-709Z-48V is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that its ten input can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six digital output can be set as alarm outputs with short-circuit protection and overload protection. System Speci cations Models ET-708Z ET-709Z PET-708Z PET-709Z PET-708Z-48V PET-709Z-48V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Surge (IEC ) - +/- kv for Power - +/- kv for Power - +/- kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.0 W 2.5 W.0 W.5 W.0 W.5 W Mechanical Dimensions (W x L x H) 72 mm x 6 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --9 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

23 Remote I/O Modules and I/O Expansion Units I/O Speci cations Models Thermocouple Input Channels Sensor Type Individual Channel Con guration Resolution Sampling Rate Accuracy Zero Drift Span Drift Over Voltage Protection ET-708Z PET-708Z PET-708Z-48V ET-709Z PET-709Z PET-709Z-48V 0 (Differential) +/-5 mv, +/-50 mv, +/-00 mv, +/-50 mv, +/-500 mv, +/-5 mv, +/-50 mv, +/-00 mv, +/-500 mv, +/- V, +/-2.5 V +/- V, +/-2.5 V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma, 4 ~ 20 ma +/-20 ma, 0 ~ 20 ma, 4 ~ 20 ma (Jumper Selectable) (Requires Optional External 25 Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and L DIN470 ) 6-bit 0 Samples/Second (Total) +/-0.% of FSR or better +/-0.5 V/ C +/-25 ppm/ C 240 Vrms Input Impedance >00 k Common Mode Rejection 50 db Min. 86 db Min. Normal Mode Rejection 00 db Temperature Output Consistency Stable Temperature Output in the Field Open Wire Detection Digital Output Channels 6 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 700 ma/channel Load Voltage 5 VDC ~ 50 VDC Overvoltage Protection Overload Protection Short-circuit Protection Power-on Value Safe Value 60 VDC.4 A, Programmable, Programmable Wire Connections ET-708Z/PET-708Z/PET-708Z-48V Voltage Input (Default) Voltage ET-709Z/PET-709Z/PET-709Z-48V nv Voltage Input )t (Default) + - V CH+ CH- + - V CH+ CH- Thermocouple Input (Default) Thermocouple Input (Default) + CH+ + CH+ - CH- - CH- Current Input Current Input CH+ CH- Note: When connecting to a current source, an optional external 25 resistor is required. CH+ CH- ET-708Z/PET-708Z/PET-708Z-48V/ET-709Z/PET-709Z/PET-709Z-48V Digital Output ON State Readback as OFF State Readback as 0 Open Collector (Sink) LOAD DOx LOAD DOx 5 ~ 50 VDC 5 ~ 50 VDC Website: sales@icpdas.com Vol. RIO

24 ET-7000/PET-7000/PET V Series (Web based) Pin Assignments F.G. F.G. AGND AGND CON DB CON F.G. AGND CH0+ CH0- CH+ CH- CH2+ CH2- CH+ CH- CH4+ CH4- F.G. AGND CH5+ CH5- CH6+ CH6- CH7+ CH7- CH8+ CH8- CH9+ CH9- D -822 DO0 DO DO2 DO DO4 DO5 ISO.GND (R)+Vs 9 DO0 DO DO2 DO DO4 DO5 ISO.GND (R)+48V Out 9 PET-708Z: PoE PET-709Z: PoE ET-708Z: +0 ~ +0 VDC PET-708Z: +2 ~ +48 VDC Input ET-709Z: +0 ~ +0 VDC PET-709Z: +2 ~ +48 VDC Input PET-708Z-48V: PoE PET-709Z-48V: PoE PET-708Z-48V: +48 VDC Output PET-709Z-48V: +48 VDC Output --2 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

25 Remote I/O Modules and I/O Expansion Units Dimensions (Units: mm) DN-820 DN Front View 65 Top View 2.8 Ordering Information ET-708Z/S CR PET-708Z/S CR PET-708Z-48V/S CR ET-708Z/S2 CR PET-708Z/S2 CR PET-708Z-48V/S2 CR ET-709Z/S CR PET-709Z/S CR PET-709Z-48V/S CR ET-709Z/S2 CR PET-709Z/S2 CR PET-709Z-48V/S2 CR Rear View Bottom View 5.0 Left Side View Right Side View Front View 27.0 Left Side View Rear View Top View Bottom View 0-channel Thermocouple Input Module with DB-820 Daughter Board (RoHS) 0-channel Thermocouple Input Module with DB-820 Daughter Board with PoE (RoHS) 0-channel Thermocouple Input Module with DB-820 Daughter Board with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) 0-channel Thermocouple Input Module with DN-822 Daughter Board and a.8 m Cable (RoHS) 0-channel Thermocouple Input Module with DN-822 Daughter Board and a.8 m Cable with PoE (RoHS) 0-channel Thermocouple Input Module with DN-822 Daughter Board and a.8 m Cable with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) 0-channel Thermocouple Input Module with DB-820 Daughter Board (RoHS) 0-channel Thermocouple Input Module with DB-820 Daughter Board with PoE (RoHS) 0-channel Thermocouple Input Module with DB-820 Daughter Board with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) 0-channel Thermocouple Input Module with DN-822 Daughter Board and a.8 m Cable (RoHS) 0-channel Thermocouple Input Module with DN-822 Daughter Board and a.8 m Cable with PoE (RoHS) 0-channel Thermocouple Input Module with DN-822 Daughter Board and a.8 m Cable with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Front Rear ET-708Z/S = DB-820 Connects to the ET-708Z Directly PET-708Z/S = DB-820 Connects to the PET-708Z Directly PET-708Z-48V/S = DB-820 Connects to the PET-708Z-48V Directly ET-709Z/S = DB-820 Connects to the ET-709Z Directly PET-709Z/S = DB-820 Connects to the PET-709Z Directly PET-709Z-48V/S = DB-820 Connects to the PET-709Z Directly ET-708Z/S2 = DN-822 Connects to the ET-708Z Directly PET-708Z/S2 = DN-822 Connects to the PET-708Z Directly PET-708Z-48V/S2 = DN-822 Connects to the PET-708Z-48V Directly ET-709Z/S2 = DN-822 Connects to the ET-709Z Directly PET-709Z/S2 = DN-822 Connects to the PET-709Z Directly PET-709Z-48V/S2 = DN-822 Connects to the PET-709Z Directly Accessories CD cm Cable +DB-820 4PAPP-006-G PET-708Z/S +CD PAPP-006-G PET-708Z-48V/S +CD PAPP-006-G PET-709Z/S +CD PAPP-006-G PET-709Z-48V/S +CD PAPP-006-G PET-708Z/S +CD-258D PET-708Z-48V/S +CD-258D PET-709Z/S +CD-258D PET-709Z-48V/S +CD-258D CD-258D.8 m Cable +DB-820 Website: sales@icpdas.com Vol. RIO

26 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-709 PET-709 PET V 8-channel Analog Input and 4-channel DO Module Built-in I/O AI: 8 Channels with 240 Vrms Overvoltage Protection DO: 4 Channels Introduction The ET-709/PET-709/PET V features an extremely excellent protection mechanism where overvoltage protection is up to 240 Vrms. It has wider input range for voltage compared to ET-707. ET-709/PET-709 measures voltage from +/-5 mv ~ +/-0 V. Its input type also includes current and thermocouple. An intuitive design is built in this model, measuring current or voltage simply by a jumper. An external resistor is no longer needed. Eight of its inputs can individually be configured with different kinds of analog input. Moreover, the ET-709/PET-709/PET V also got open thermocouple detection and many protection mechanisms. The 4 digital output can be set as alarm output with Short-circuit protection and overload protection. System Speci cations Models ET-709 PET-709 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W.4 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --2 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

27 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Analog Input Channels Sensor Type Individual Channel Con guration Resolution Sampling Rate Accuracy Zero Drift Span Drift Overvoltage Protection 8 (Differential) +/-5 mv, +/-50 mv, +/-00 mv, +/-50 mv, +/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0~20 ma, 4~20 ma Thermocouple (J, K, T, E, R, S, B, N, C, L, M,, and L DIN470 ) 6-bit 0 samples/second total +/-0. % or better +/-0 V/ C +/-25 ppm/ C 240 Vrms Input Voltage > M Impedance Current 25 Common Mode Rejection 86 db Min. Normal Mode Rejection 00 db Open Wire Detection Digital Output Channels 4 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 700 ma/channel Load Voltage 5 VDC ~ 50 VDC Overvoltage Protection 60 VDC Overload Protection.4 A Short-circuit Protection Power-on Value, Programmable Safe Value, Programmable Note: We recommend to choose ET-708Z for accurate thermocouple measurement. Vin6-2 Vin6+ Vin5 - Vin5+ PET-709: PoE PET V: PoE Vin4 - Vin4+ Vin - Vin+ Vin2 - Vin2+ Vin - Vin+ Vin0 - Vin Vin7+ Vin7 - DO0 DO DO2 DO ISO.GND (R)+Vs ET-709: +0 ~ +0 VDC PET-709: +2 ~ +48 VDC Input Vin7+ Vin7 - DO0 DO DO2 DO ISO.GND (R)+48V Out 9 PET V: +48 VDC Output Wire Connections + - Thermocouple Input Voltage Input Current Input p p g p p JUMPER JUMPER Vinx+ Default + Vin+ Default + Vin+ mv/v V ma Vinx- - Vin- - Vin- JUMPER Digital Output ON State OFF State Readback Readback as as Readback Readback as 0 as 0 Open Collector Open lector Collector (Sink) (Sink) LOAD DOx ISO.GND LOAD DOx ISO.GND 5 ~ 50 VDC 5 ~ 50 VDC Ordering Information ET-709 CR PET-709 CR PET V CR 8-channel Analog Input and 4-channel DO Module (RoHS) 8-channel Analog Input and 4-channel DO Module with PoE (RoHS) 8-channel Analog Input and 4-channel DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

28 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection Built-in I/O ET-7026 PET-7026 PET V Multi-function Module AI: 6 Channels with 240 Vrms Overvoltage Protection AO: 2 Channels DI/Counter: 2 Channels DO: 2 Channels Introduction The ET-7026/PET-7026/PET V is a multi-function module with 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. It provides various programmable analog inputs (+/-500 mv, +/- V, +/-5 V, +/-0 V, +/-20 ma, 0 ~ 20 ma and 4 ~ 20 ma), and analog outputs (+/-5 V, +/-0 V, 0 ~ 20 ma and 4 ~ 20 ma). Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. Each analog input/output can be programmed to accept current or voltage as input/output depending upon the position of corresponding jumper. System Speci cations Models ET-7026 PET-7026 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 2500 VDC 2500 VDC EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal and 8 kv Air for Random Point EFT (IEC ) +/-4 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption. W 4.2 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --25 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

29 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Analog Input Channels Type Individual Channel Con guration Resolution Sampling Rate Normal Mode Fast Mode Normal Mode Fast Mode 6 (Differential) +/-500 mv, +/-V, +/-5 V, +/-0 V +0 ma ~ +20 ma, +/-20 ma, 4 ~ 20 ma (Jumper Selectable) 6-bit 2-bit 0 Samples/Second (Total) 60 Samples/Second (Total) Normal Mode +/-0.% Accuracy Fast Mode +/-0.5% or better Zero Drift +/-20 V/ C Span Drift +/-25 ppm/ C Overvoltage Protection 240 Vrms Input Voltage 2 M Impedance Current 25 Common Mode Rejection 86 db Min. Normal Mode Rejection 00 db Analog Output Channels 2 Type Individual Channel Con guration Resolution Accuracy Voltage Output Capability Current Load Resistance Open Wire Detection Power-on Value +0 VDC ~ +5 VDC, +/-5 VDC, +0 VDC ~ +0 VDC, +/-0 VDC,+0 ma ~ +20 ma, +4 ma ~ +20 ma (Jumper Selectable) 2-bit +/-0.% of FSR 20 0 V 500, for 4 ~ 20 ma only, Programmable Safe Value, Programmable Digital Input/Counter Channels 2 Dry Contact (Source) Wet contact (Sink/Source) On Voltage Level Off Voltage Level Effective Distance for Dry Contact On Voltage Level Off Voltage Level Close to GND Open 500 M Max. + VDC Max. +.5 VDC ~ +0 VDC Channels 2 Max. Count 4,294,967,285 (2-bit) Counters Max. Input Frequency 00 Hz Min. Pulse Width 5 ms Overvoltage Protection 0 VDC Digital Output Channels 2 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 700 ma/channel Load Voltage +5 VDC ~ +50 VDC Overvoltage Protection 60 VDC Overload Protection.4 A Short-circuit Protection Power-on Value, Programmable Safe Value, Programmable AGND 2 Digital Input/ Countero Dry Contact Vout0+ Vin5 - Vin5+ Vin4 - Wire Connections + mv/v V - + ma - Load Load PET-7026: PoE PET V: PoE + v - Vin4+ Vin - Vin+ Vin2 - Voltage Input Current Inputp Voltage Outputt Current Output ON State Readback as Vin+ Vin- Vin+ Vin- Vout+ AGND Vout+ AGND DIx ISO GND Vin2+ Vin - Vin+ JUMPER Vin0 - Vin Vout+ AGND DI0 DI DO0 DO ISO.GND (R)+Vs Vout+ AGND ET-7026: +0 ~ +0 VDC PET-7026: +2 ~ +48 VDC Input DI0 DI DO0 DO ISO.GND (R)+48V Out 9 PET V: +48 VDC Output JUMPER Default Default OFF State Readback as 0 DIx ISO GND Ordering Information ET-7026 CR PET-7026 CR PET V CR Multi-function Module (RoHS) Multi-function PoE Module (RoHS) Multi-function PoE Module and 48 VDC, 0 W output (RoHS) (Call Manufacture) Digital ital Output t Open p Collector (Sink) ON State Readback as LOAD DOx ISO.GND 5 ~ 50 VDC OFF State Readback as 0 LOAD DOx ISO.GND 5 ~ 50 VDC Website: sales@icpdas.com Vol. RIO

30 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7042 PET-7042 PET V 6-channel Isolated Digital Output Module Built-in I/O DO: 6 Channels Introduction The ET-7042/PET-7042/PET V provides 6 sink-type digital output. It features optical isolation for 750 Vrms of transient overvoltage protection and doesn t have channel-to-channel isolation. The power-on value and safe value of digital output channel are programmable. In some industrial applications, the user can connect the output channel of ET-7042/PET-7042/PET V to the RM series relay module to switch inductive loads. System Speci cations Models ET-7042 PET-7042 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.7 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --27 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

31 Remote I/O Modules and I/O Expansion Units I/O Speci cations Models ET-7042 PET-7042 PET V Digital Output Channels 6 Type Isolated Open Collector Sink/Source (NPN/PNP) Max. Load Current Sink 00 ma/channel at 25 C Direct Drive Power Relay Module +5 VDC ~ +0 VDC Load Voltage Overvoltage Protection - 60 VDC Overload Protection -. A Short-circuit Protection - Power-on Value, Programmable Safe Value Wire Connections Output Type Drive Relay Resistance Load + -, Programmable ON Statet ON State Readback as Readback as DO.PWR DOx DO.GND DO.PWR DOx DO.GND Pin Assignments ET-7042 DO DO0 DO9 DO8 DO7 DO6 DO5 DO4 DO DO2 DO DO0 DO.GND DO.PWR 2 DO2 DO DO4 DO5 (R)+Vs 9 0 ET-7042: +0 ~ +0 VDC PET-7042/PET V Output Type OFF Statet OFF State Readback as Readback as 0 DO DO0 DO9 DO8 DO7 DO6 DO5 DO4 DO DO2 DO DO0 DO.GND DO.PWR Drive Relay DO.PWR DOx 2 0 Resistance Load + - DO.GND DO.PWR DOx DO.GND DO2 DO DO4 DO5 DO.PWR2 DO.GND2 (R)+Vs 9 Accessories PET-7042: PoE PET-7042: +2 ~ +48 VDC Input NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) DO2 DO DO4 DO5 DO.PWR2 DO.GND2 9 (R)+48V Out NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) PET V: PoE PET V: +48 VDC Output MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) Ordering Information ET-7042 CR 6-channel Isolated Digital Output Module (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) PET-7042 CR PET V CR 6-channel Isolated Digital Output Module with PoE (RoHS) 6-channel Isolated Digital Output Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

32 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7044 PET-7044 PET V 8-channel DI and 8-channel DO Module Built-in I/O DI/Counter: 8 Channels DO: 8 Channels Introduction The ET-7044/PET-7044/PET V provides 8 wet contact digital input and 8 sink-type digital output. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. Each input channel can be used as a 2- bit counter and each output channel can drive 00 ma load. The power-on value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-7044 PET-7044 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --29 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

33 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Digital Input/Counter Channels 8 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Digital Output Channels 8 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current Load Voltage Overvoltage Protection Overload Protection Short-circuit Protection Power-on Value Safe Value 00 ma/channel at 25 C Direct Drive Power Relay Module +0 VDC ~ +40 VDC 60 VDC. A, Programmable, Programmable IN2 2 IN IN0 PET-7044: PoE DO7 DO6 IN IN DO5 IN4 IN4 DO4 IN5 DO IN6 DO2 IN7 DO DO0 2 DO.GND DO.PWR 0 9 (R)+Vs ET-7044: +0 ~ +0 VDC PET-7044: +2 ~ +48 VDC Input IN5 IN6 IN7 2 9 (R)+48V Out PET V: PoE PET V: +48 VDC Output Wire Connections Digital Input/Counter Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC INx INx Sink +0 ~ +50 VDC OPEN or <4 VDC INx INx Source Output Type ON State Readback as OFF State Readback as 0 Drive Relay DO.PWR DOx DO.GND DO.PWR DOx DO.GND Resistance Load + - DO.PWR DOx DO.GND + - DO.PWR DOx DO.GND Ordering Information ET-7044 CR PET-7044 CR PET V CR 8-channel DI and 8-channel DO Module (RoHS) 8-channel DI and 8-channel DO Module with PoE (RoHS) 8-channel DI and 8-channel DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

34 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7050 PET-7050 PET V 2-channel DI and 6-channel DO Module Built-in I/O DI/Counter: 2 Channels DO: 6 Channels Introduction The ET-7050/PET-7050/PET V provides 2 wet contact digital input and 6 sink-type digital output. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. Each input channel can be used as a 2-bit counter and each output channel can drive 00 ma load. The power-on value and safe value of digital output channel are programmable. In some industrial applications, the user can connect the output channel of ET-7050/PET-7050/PET V to the RM series relay module to switch inductive loads. System Speci cations Models ET-7050 PET-7050 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

35 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Models ET-7050 PET-7050 PET V Digital Input/Counter Channels 2 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Digital Output Channels 6 Type Isolated Open Collector Sink/Source (NPN/PNP) Sink Max. Load Current 00 ma/channel at 25 C Direct Drive Power Relay Module Load Voltage +5 VDC ~ +0 VDC Overvoltage Protection - 60 VDC Overload Protection -. A Short-circuit Protection - Power-on Value Safe Value, Programmable, Programmable IN5 2 IN4 IN IN2 PET-7050: PoE IN IN0 IN6 IN6 DO5 IN7 IN7 DO4 IN8 DO IN9 DO2 IN0 DO DO0 IN DO.GND DO.PWR (R)+Vs 0 9 ET-7050: +0 ~ +0 VDC PET-7050: +2 ~ +48 VDC Input IN8 IN9 IN0 IN (R)+48V Out 9 PET V: PoE PET V: +48 VDC Output Wire Connections Digital Input/Counter Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC INx INx Sink ~ +50 ~ +50 VDC DCDC V OPEN or or <4 V VDC VDDC INx INx Source Output Type ON ON State Readback as as OFF State Readback as 0 Drive Relay DO.PWR DOx DO.GND DO.PWR DOx DO.GND Resistance Load + - DO.PWR DOx DO.GND + - DO.PWR DOx DO.GND Ordering Information ET-7050 CR PET-7050 CR PET V CR 2-channel DI and 6-channel DO Module (RoHS) 2-channel DI and 6-channel DO Module with PoE (RoHS) 2-channel DI and 6-channel DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

36 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-705 PET-705 PET V 6-channel Isolated Digital Input Module Built-in I/O DI/Counter: 6 Channels Introduction The ET-705/PET-705/PET V provides 6 wet contact digital input. Each input channel can be used as a 2-bit counter. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-705 PET-705 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.2 W 2.8 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing -- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

37 Remote I/O Modules and I/O Expansion Units I/O Speci cations Digital Input/Counter Channels 6 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Pin Assignments IN2 IN IN0 IN9 IN8 IN7 IN6 IN5 IN4 IN IN2 IN IN0 2 IN IN4 IN5 2 (R)+Vs 9 0 PET-705: PoE IN IN4 ET-705: +0 ~ +0 VDC PET-705: +2 ~ +48 VDC Input IN5 2 9 (R)+48V Out PET V: PoE PET V: +48 VDC Output Wire Connections Digital Input/Counter Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC INx INx Sink +0 ~ +50 V VDC OPEN or <4 V VDC INx INx Source Ordering Information ET-705 CR PET-705 CR PET V CR 6-channel Isolated Digital Input Module (RoHS) 6-channel Isolated Digital Input Module with PoE (RoHS) 6-channel Isolated Digital Input Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

38 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7052 PET-7052 PET V 8-channel DI and 8-channel DO Module Built-in I/O DI/Counter: 8 Channels DO: 8 Channels Introduction The ET-7052/PET-7052/PET V provides 8 wet contact digital input and 8 source-type digital output. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. Each input channel can be used as a 2- bit counter and each output channel can drive 650 ma load. The power-on value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-7052 PET-7052 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --5 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

39 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Digital Input/Counter Channels 8 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Digital Output Channels 8 Type Isolated Open Collector Sink/Source (NPN/PNP) Source Max. Load Current 650 ma/channel at 25 C Load Voltage +0 VDC ~ +40 VDC Overvoltage Protection 47 VDC Overload Protection - Short-circuit Protection Power-on Value Safe Value, Programmable, Programmable IN2 2 IN IN0 DO7 DO6 IN DO5 IN4 DO4 IN5 DO IN6 DO2 IN7 DO DO0 2 IN.GND DO.GND DO.PWR (R)+Vs 0 9 Wire Connections Digital Input/Counter Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC Sink +0 ~ +50 VDC OPEN or <4 V VDC Source Digital Output ON State Readback as OFF State Readback as 0 Source + - DO.PWR Inverse protection Load DOx DO.GND Fuse Overvoltage Protection Current Limit ESD Protection + - PET-7052: PoE IN IN4 ET-7052: +0 ~ +0 VDC PET-7052: +2 ~ +48 VDC Input IN5 IN6 IN7 2 IN.GND (R)+48V Out 9 PET V: PoE PET V: +48 VDC Output INx INx INx INx DO.PWR Inverse protection Load DOx DO.GND Fuse Overvoltage Protection Current Limit ESD Protection Ordering Information ET-7052 CR PET-7052 CR PET V CR 8-channel DI and 8-channel DO Module (RoHS) 8-channel DI and 8-channel DO Module with PoE (RoHS) 8-channel DI and 8-channel DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

40 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-705 PET-705 PET V 6-channel Isolated Digital Input Module Built-in I/O DI/Counter: 6 Channels Introduction The ET-705/PET-705/PET V provides 6 dry contact digital input. Each input channel can be used as a 2-bit counter. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-705 PET-705 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --7 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

41 Remote I/O Modules and I/O Expansion Units I/O Speci cations Digital Input/Counter Channels 6 Contact Dry Contact Sink/Source (NPN/PNP) Source On Voltage Level Open Off Voltage Level Close to GND Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection - Effective Distance 500 M Max. Wire Connections Pin Assignments ET-705 IN2 IN IN0 IN9 IN8 IN7 IN6 IN5 IN4 IN IN2 IN IN0 IN.GND 2 IN IN4 IN5 IN.GND (R)+Vs 9 0 Digital Input/Counter Dry Contact ON State Readback as as IN.GND INx Relay Open OFF State Readback as 0 PET-705/PET V ET-705: +0 ~ +0 VDC IN.GND Relay Close INx IN2 IN IN0 IN9 IN8 IN7 IN6 IN5 IN4 IN IN2 IN IN0 IN.GND Accessories IN IN4 IN5 IN.GND2 (R)+Vs NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) PET-705: PoE PET-705: +2 ~ +48 VDC Input NS-205PSE-24V CR MDR CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) IN IN4 IN5 IN.GND2 (R)+48V Out 9 DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) PET V: PoE PET V: +48 VDC Output Ordering Information ET-705 CR PET-705 CR PET V CR 6-channel Isolated Digital Input Module (RoHS) 6-channel Isolated Digital Input Module with PoE (RoHS) 6-channel Isolated Digital Input Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

42 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7055 PET-7055 PET V 8-channel DI and 8-channel DO Module Built-in I/O DI/Counter: 8 Channels DO: 8 Channels Introduction The ET-7055/PET-7055/PET V provides 8 wet contact digital input and 8 source-type digital output. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. Each input channel can be used as a 2- bit counter and each output channel can drive 650 ma load. The power-on value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-7055 PET-7055 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 750 Vrms 750 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --9 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

43 Remote I/O Modules and I/O Expansion Units I/O Speci cations Digital Input/Counter Channels 8 Contact Dry +Wet Sink/Source (NPN/PNP) Wet Contact On Voltage Level Off Voltage Level On Voltage Level Dry Contact Off Voltage Level Input Impedance Dry: Source Wet: Sink/Source +0 VDC ~ +50 VDC +4 VDC Max. Close to GND Open 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Digital Output Channels 8 Type Isolated Open Collector Sink/Source (NPN/PNP) Source Max. Load Current 650 ma/channel at 25 C Load Voltage +0 VDC ~ +40 VDC Overvoltage Protection 47 VDC Overload Protection - Short-circuit Protection Power-on Value Safe Value, Programmable, Programmable Wire Connections Digital Input/ Counter Readback as Readback as 0 Digital Output ON State Readback as Wet Contact (Sink) +0 ~ +50 VDC OPEN or <4 VDC INx INx +0 ~ +50 VDC OPEN or <4 VDC Source Wet Contact (Source) - + INx - + INx Pin Assignments IN2 2 IN IN0 PET-7055: PoE DO7 DO6 IN DO5 IN4 DO4 IN5 DO IN6 DO2 IN7 DO DO0 2 IN.GND DO.GND DO.PWR (R)+Vs 0 9 ET-7055: +0 ~ +0 VDC PET-7052: +2 ~ +48 VDC Input IN IN4 IN5 IN6 IN7 2 IN.GND (R)+48V Out 9 PET V: PoE PET V: +48 VDC Output Load DO.PWR DOx DO.GND Inverse protection Fuse Overvoltage Protection OFF State Readback as 0 Current Limit ESD Protection DO.PWR DOx Load DO.GND Inverse protection Fuse Overvoltage Protection Current Limit ESD Protection Digital Input/ Counter ON State Readback as OFF State Readback as 0 Dry Contact Relay Open IN.GND INx Relay Close IN.GND INx Ordering Information ET-7055 CR PET-7055 CR PET V CR 8-channel DI and 8-channel DO Module (RoHS) 8-channel DI and 8-channel DO Module with PoE (RoHS) 8-channel DI and 8-channel DO Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Website: sales@icpdas.com Vol. RIO

44 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7060 PET-7060 PET V 6-channel Power Relay Output and 6-channel DI Module Built-in I/O DI/Counter: 6 Channels Power Relay: 6 Channels Introduction The ET-7060/PET-7060/PET V provides 6 wet contact digital input and 6 form A electromechanical relays. It features optical isolation for 000 Vrms of transient overvoltage protection and doesn t have channel-to-channel isolation. Each input channel can be used as a 2-bit counter. The power-on value and safe value of relay are programmable. Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These flyback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these flyback voltages at your inductive load by installing a flyback diode for DC loads or a metal oxide varistor for AC loads. System Speci cations Models ET-7060 PET-7060 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 000 Vrms 000 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.9 W.5 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --4 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

45 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Digital Input/Counter Channels 6 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Power Relay Channels 6 Type Power Relay, Form A (SPST N.O.) Operating Voltage Range 250 VAC/0 VDC Max. Load Current 5.0A/channel at 25 C Operate Time 6 ms (Typical) Release Time ms (Typical) Electrical Life (Resistive Load) Mechanical Life Power-on Value Safe Value VDE UL 5A 250 VAC 0,000 ops (0 ops/minute) at 75 C 5A 0 VDC 70,000 ops (0 ops/minute) at 75 C 5A 250 VAC/0 VDC 6,000 ops. A 250 VAC/0 VDC 00,000 ops. 20,000,000 ops. at no load (00 ops./minute), Programmable, Programmable RL5 COM 2 RL5 NO RL4 COM RL4 NO PET-7060: PoE RL COM RL NO IN5 IN5 RL2 COM IN4 IN4 RL2 NO IN RL COM IN2 RL NO IN RL0 COM RL0 NO IN0 0 9 (R)+Vs ET-7060: +0 ~ +0 VDC PET-7060: +2 ~ +48 VDC Input IN IN2 IN IN0 9 (R)+48V Out PET V: PoE PET V: +48 VDC Output Wire Connections Digital Input/ Counter Readback as Readback as 0 Power Relay ON State Readback as Sink +0 ~ +50 VDC OPEN or <4 VDC INx INx +0 ~ +50 VDC OPEN or <4 VDC Relay Output AC/DC RLx.COM LOAD RLx.NO Relay Close OFF State Readback as 0 Source INx - + INx - + RLx.COM AC/DC LOAD RLx.NO Relay Open Ordering Information ET-7060 CR PET-7060 CR PET V CR 6-channel Power Relay Output and 6-channel DI Module (RoHS) 6-channel Power Relay Output and 6-channel DI Module with PoE (RoHS) 6-channel Power Relay Output and 6-channel DI Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

46 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7062 PET-7062 PET V 2-channel Power Relay Output and 6-channel DI Module Built-in I/O DI/Counter: 6 Channels Power Relay: 2 Channels for switching inductive loads Introduction The ET-7062/PET-7062/PET V provides 6 wet contact digital input and 2 power relay output. Each input channel can be used as a 2-bit counter. It features optical isolation for 750 Vrms of transient overvoltage protection but doesn t provide channel-to-channel isolation. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-7062 PET-7062 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 000 Vrms 000 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.9 W.5 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --4 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

47 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Digital Input/Counter Channels 6 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Power Relay Channels 2 Type Power Relay, Form C Operating Voltage Range 250 VAC/0 VDC Max. Load Current 5.0A, TV-5 rated/channel at 25 C Operate Time (at nomi.volt) 5 ms Max. Release Time (at nomi.volt) 5 ms Max. Electrical Life (Resistive Load) Mechanical Life Electrical Life Insulation resistance Power-on Value Safe Value UL/CUL TUV Form A Form C Form A TV-5 25 VAC 5A 25 VAC at 85 C 5A 250 VAC at 85 C 5A 0 VDC at 85 C NO: 5 A 250 VAC NC: 5 A 250 VAC 5A 250 VAC 5A 0 VDC 0,000,000 ops 50,000 ops 000 M min. at 500 VDC, Programmable, Programmable RL COM 2 RL NO PET-7062: PoE PET V: PoE RL NC IN5 IN5 RL0 COM IN4 IN4 IN RL0 NO IN2 IN RL0 NC IN0 0 9 (R)+Vs ET-7062: +0 ~ +0 VDC PET-7062: +2 ~ +48 VDC Input IN IN2 IN IN0 9 (R)+48V Out PET V: +48 VDC Output Wire Connections Digital Input/ Counter Sink Readback as Readback as 0 +0 ~ +50 VDC OPEN or <4 VDC INx INx +0 ~ VDC V DC OPEN or or <4 V VDC DC Power Relay Relay Output AC/DC RLx.NO LOAD LOAD RLx.NC ON State Readback as Readback as RLx.COM OFF State OFF State Readback as 0 Readback as 0 Relay Close Source - + INx - + INx AC/DC RLx.COM RLx.NO LOAD LOAD RLx.NC Relay Close Ordering Information ET-7062 CR PET-7062 CR PET V CR 2-channel Power Relay Output and 6-channel DI Module (RoHS) 2-channel Power Relay Output and 6-channel DI Module with PoE (RoHS) 2-channel Power Relay Output and 6-channel DI Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

48 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7065 PET-7065 PET V 6-channel PhotoMOS Relay Output and 6-channel DI Module Built-in I/O DI/Counter: 6 Channels PhotoMOS Relay: 6 Channels Introduction The ET-7065/PET-7065/PET V provides 6 wet contact digital input and 6 form A PhotoMOS relays. It features optical isolation for 000 Vrms of transient overvoltage protection and doesn t have channel-to-channel isolation. Each input channel can be used as a 2-bit counter. The power-on value and safe value of PhotoMOS relay are programmable. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-7065 PET-7065 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 000 Vrms 000 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.9 W.0 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --45 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

49 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Digital Input/Counter Channels 6 Contact Wet Contact Sink/Source (NPN/PNP) Sink/Source On Voltage Level +0 VDC ~ +50 VDC Off Voltage Level +4 VDC Max. Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC PhotoMOS Relay Channels 6 Type PhotoMOS Relay, Form A Load Voltage 60 VDC/VAC Max. Load Current Operate Time Release Time Power-on Value Safe Value 60V/.0A (Operating Temperature -25 ~ +40 C) 60V/0.8A (Operating Temperature +40 ~ +60 C) 60V/0.7A (Operating Temperature +60 ~ +75 C). ms (Typical) 0. ms (Typical), Programmable, Programmable RL5 COM 2 RL5 NO RL4 COM RL4 NO PET-7065: PoE RL COM RL NO IN5 IN5 RL2 COM IN4 IN4 RL2 NO IN RL COM IN2 RL NO IN RL0 COM RL0 NO IN0 0 9 (R)+Vs ET-7065: +0 ~ +0 VDC PET-7065: +2 ~ +48 VDC Input IN IN2 IN IN0 9 (R)+48V Out PET V: PoE PET V: +48 VDC Output Wire Connections Digital Input/ Counter Readback as Readback as 0 PhotoMOS Relay ON State Readback as Sink +0 ~ +50 VDC OPEN or <4 VDC INx +0 ~ +50 VDC OPEN or <4 VDC INx INx INx Form A Relay Contact AC/DC AC/DC Load Load OFF State Readback as 0 RLx.NO RLx.COM RLx.NO RLx.COM Source Ordering Information ET-7065 CR PET-7065 CR PET V CR 6-channel PhotoMOS Relay Output and 6-channel DI Module (RoHS) 6-channel PhotoMOS Relay Output and 6-channel DI Module with PoE (RoHS) 6-channel PhotoMOS Relay Output and 6-channel DI Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

50 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7066 PET-7066 PET V 8-channel PhotoMOS Relay Output Module Built-in I/O PhotoMOS Relay: 8 Channels Introduction The ET-7066/PET-7066/PET V provides 8 form A PhotoMOS relays. It features optical isolation for 000 Vrms of transient overvoltage protection and doesn t have channel-to-channel isolation. The power-on value and safe value of PhotoMOS relay are programmable. It can safely be used in applications where hazardous voltages are present. System Speci cations Models ET-7066 PET-7066 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 000 Vrms 000 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption 2.4 W 2.8 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --47 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

51 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments PhotoMOS Relay Channels 8 Type PhotoMOS Relay, Form A Load Voltage 60 VDC/VAC Load Current Operate Time Release Time Power-on Value Safe Value Wire Connections PhotoMOS Relay Form A Relay Contact AC/DC AC/DC 60V/.0A (Operating Temperature -25 ~ +40 C) 60V/0.8A (Operating Temperature +40 ~ +60 C) 60V/0.7A (Operating Temperature +60 ~ +75 C). ms (Typical) 0. ms (Typical), Programmable, Programmable Load Load ON State Readback as OFF State Readback as 0 RLx.NO RLx.COM RLx.NO RLx.COM RL5 COM 2 RL5 NO RL4 COM RL4 NO PET-7066: PoE RL COM RL NO RL6 NO RL2 COM RL6 COM RL2 NO RL7 NO RL COM RL7 COM RL NO RL0 COM RL0 NO 0 9 (R)+Vs ET-7066: +0 ~ +0 VDC PET-7066: +2 ~ +48 VDC Input 9 RL6 NO RL6 COM RL7 NO RL7 COM (R)+48V Out PET V: PoE PET V: +48 VDC Output Ordering Information ET-7066 CR PET-7066 CR PET V CR 8-channel PhotoMOS Relay Output Module (RoHS) 8-channel PhotoMOS Relay Output Module with PoE (RoHS) 8-channel PhotoMOS Relay Output Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

52 ET-7000/PET-7000/PET V Series (Web based) Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection ET-7067 PET-7067 PET V 8-channel Power Relay Output Module Built-in I/O Power Relay: 8 Channels Introduction The ET-7067/PET-7067/PET V provides 8 form A electromechanical relays. It features optical isolation for 000 Vrms of transient overvoltage protection and doesn t have channel-to-channel isolation. The power-on value and safe value of relay are programmable. It can safely be used in applications where hazardous voltages are present. The user should choose ET-706/PET-706/PET V to switch inductive loads instead of ET-7062/PET-7062/PET V. System Speci cations Models ET-7067 PET-7067 PET V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 Base-TX with Auto MDI/MDI-X PoE - Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Link/Act) L (Ethernet 0/00 M Speed) PoE Power - 2-Way Isolation Ethernet 500 VDC - I/O 000 Vrms 000 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 0 ~ 0 VDC, 2 ~ 48 VDC - Powered from PoE -, IEEE 802.af, Class Power Output VDC, 0 W Consumption.2 W.9 W Mechanical Dimensions (W x L x H) 72 mm x 2 mm x 5 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing --49 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

53 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Power Relay Channels 8 Type Power Relay, Form A (SPST N.O.) Operating Voltage Range 250 VAC/0 VDC Max. Load Current 5.0A/channel at 25 C Operate Time 6 ms (Typical) Release Time ms (Typical) Electrical Life (Resistive Load) Mechanical Life Power-on Value Safe Value VDE UL Wire Connections Power Relay Relay Output AC/DC 5A 250 VAC 0,000 ops (0 ops/minute) at 75 C 5A 0 VDC 70,000 ops (0 ops/minute) at 75 C 5A 250 VAC/0 VDC 6,000 ops. A 250 VAC/0 VDC 00,000 ops. 20,000,000 ops. at no load (00 ops./minute), Programmable, Programmable ON State Readback as RLx.COM LOAD RLx.NO OFF State Readback as 0 Relay Close RL5 COM 2 RL5 NO RL4 COM RL4 NO PET-7067: PoE RL COM RL NO RL6 NO RL2 COM RL6 COM RL2 NO RL7 NO RL COM RL7 COM RL NO RL0 COM RL0 NO (R)+Vs 0 9 (R)+Vs ET-7067: +0 ~ +0 VDC PET-7067: +2 ~ +48 VDC Input 9 RL6 NO RL6 COM RL7 NO RL7 COM (R)+Vs (R)+48V Out RLx.COM Relay Open AC/DC LOAD RLx.NO PET V: PoE PET V: +48 VDC Output Ordering Information ET-7067 CR PET-7067 CR PET V CR 8-channel Power Relay Output Module (RoHS) 8-channel Power Relay Output Module with PoE (RoHS) 8-channel Power Relay Output Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

54 PEE-7000/PEE V Series (Web based).4. PEE-7000/PEE V Series (Web based) 4 The functionality of the PEE-7000 series modules is almost the same as the PET-7000 series. The main difference is that the PEE-7000 series has a built-in two-port Ethernet switch to form a daisy-chain topology. Which allows PEE-7000 series to connect in series to each other or other Ethernet devices. Users can easily simplify the cabling and save installation space with the feature. Features. Daisy-Chain Ethernet Cabling The PEE-7000 Series has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced. 2. Power over Ethernet (PoE) The PEE-7000 series module can be powered by an IEEE802.af compliant PoE switch. Both Ethernet and power can be carried by an Ethernet cable eliminating the need for additional wiring and power supply. -4- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

55 Remote I/O Modules and I/O Expansion Units PoE Splitter 4 Appearance Dimensions (Units: mm) I/O Connector PoE Indicator Information Indicator LAN (PoE) LAN2 (non-poe) Left Side View Front View Power Input for PEE-7000 Power Output for PEE V Selection Guide Model Name DI Channel Contact Channel Type DO PEE-7052 PEE V 8 Wet (Sink,Source) Dry (Source) 8 Open Collector (Source), 650 ma/channel PEE-7060 PEE V 6 Wet (Sink,Source) Dry (Source) 6 Power Relay Form A (SPST N.O.), 5.0 A/channel PEE-7067 PEE V Power Relay Form A (SPST N.O.), 5.0 A/channel Note: The I/O configurations of PEE-7000/PEE V series is the same as ET-7000/PET-7000/PET V series. Any comment, call manufacture. Website: sales@icpdas.com Vol. RIO

56 PEE-7000/PEE V Series (Web based) 4 PEE-7060 PEE V 6-channel Power Relay Output and 6-channel DI Module Features Built-in Web Server Web HMI Support for both Modbus TCP and Modbus UDP Protocols Communication Security Dual Watchdog Two Ethernet Ports for Daisy-Chain Topology Built-in PoE Splitter Wide Operating Temperature Range: -25 ~ +75 C I/O Pair Connection Built-in I/O DI/Counter: 6 Channels Power Relay: 6 Channels Introduction The PEE-7060/PEE V provides 6 (wet, dry) contact digital input and 6 form A electromechanical relays. It features optical isolation for 000 Vrms of transient overvoltage protection and doesn t have channel-to-channel isolation. Each input channel can be used as a 2-bit counter. The power-on value and safe value of relay are programmable. It offers two Ethernet switch ports to form a daisy-chain topology. Which allows PEE-7060/PEE V series to connect in series to each other or other Ethernet devices. Users can easily simplify the cabling and save installation space with the feature. System Speci cations Models PEE-7060 PEE V Software Built-in Web Server Web HMI I/O Pair Connection Communication Ethernet Port 2-Port 0/00 Base-TX Ethernet Switch, RJ-45 x 2 (Auto-negotiating, Auto-MDI/MDIX, LED indicator) PoE (PoE Splitter) Protocol Security Modbus TCP, Modbus UDP ID, Password and IP Filter Dual Watchdog, Module (0.8 seconds), Communication (Programmable) LED Indicators L (System Running) L2 (Ethernet Port Link/Act) L (Ethernet Port 2 Link/Act) PoE Power 2-Way Isolation Ethernet - I/O 000 Vrms EMS Protection ESD (IEC ) 4 kv Contact for Each Terminal EFT (IEC ) +/-2 kv for Power Power Reverse Polarity Protection Powered from Terminal Block, 2 ~ 48 VDC - Powered from PoE, IEEE 802.af, Class Power Output - 48 VDC, 0 W Consumption.5 W Mechanical Dimensions (W x L x H) 76 mm x 20 mm x 8 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75 C Storage Temperature -0 ~ +80 C Humidity 0 ~ 90% RH, Non-condensing -4- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

57 Remote I/O Modules and I/O Expansion Units I/O Speci cations Pin Assignments Digital Input/Counter Channels 6 Contact Sink/Source (NPN/PNP) Wet Contact On Voltage Level Off Voltage Level Dry +Wet Dry: Source Wet: Sink/Source +0 VDC ~ +50 VDC +4 VDC Max. 26 IN5 IN4 IN IN2 IN IN0 Wet.COM Wet.COM Dry.GND Dry.GND RL5 COM RL5!NO RL4!COM RL4!NO RL!COM RL!NO RL2!COM 9 RL2!NO Dry Contact On Voltage Level Off Voltage Level Close to GND Open 8 Input Impedance 0 k Max. Count 4,294,967,285 (2 bits) Counters Max. Input Frequency 500 Hz Min. Pulse Width ms Overvoltage Protection +70 VDC Power Relay Channels 6 E2 RL COM RL NO RL0 COM RL0 NO (R)+VS (R)+VS 4 Type Power Relay, Form A (SPST N.O.) Operating Voltage Range 250 VAC/0 VDC Max. Load Current 5.0A/channel at 25 C Operate Time 6 ms (Typical) Release Time ms (Typical) Electrical Life (Resistive Load) VDE UL 5A 250 VAC 0,000 ops (0 ops/minute) at 75 C 5A 0 VDC 70,000 ops (0 ops/minute) at 75 C 5A 250 VAC/0 VDC 6,000 ops. A 250 VAC/0 VDC 00,000 ops. PEE-7060: PoE E2 PEE-7060: +2 ~ +48 VDC Input RL COM RL NO RL0 COM RL0 NO (R)+48V Out (R)+48V Out 8 Mechanical Life 20,000,000 ops. at no load (00 ops./minute) Power-on Value Safe Value, Programmable, Programmable PEE V: PoE PEE V: +48 VDC Output Wire Connections Digital Input/ Counter Readback as Readback as 0 Power Relay ON State Readback as OFF State Readback as 0 Sink +0 ~ +50 VDC OPEN or <4 VDC INx INx +0 ~ +50 VDC OPEN or <4 VDC Relay Output Digital Input/ Counter AC/DC RLx.COM LOAD RLx.NO ON State Readback as Relay Close AC/DC RLx.COM LOAD RLx.NO OFF State Readback as 0 Relay Open Source INx - + INx - + Dry Contact Relay Open IN.GND INx Relay Close IN.GND INx Ordering Information PEE-7060 CR PEE V CR 6-channel Power Relay Output and 6-channel DI Module with PoE (RoHS) 6-channel Power Relay Output and 6-channel DI Module with PoE and 48 VDC, 0 W output (RoHS) (Call Manufacture) Accessories NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) MDR CR 24V/A, 24 W Power Supply with DIN-Rail Mounting (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 48 VDC Input (RoHS) NS-205PSE-24V CR Unmanaged Ethernet Switch with 4-PoE and RJ45 uplink; requires a 24 VDC Input (RoHS) DIN-KA52F-48 CR 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS) Website: sales@icpdas.com Vol. RIO

58 tet/tpet Series (IP based).5. tet/tpet Series Modules (IP based) Introduction 5 Applications Remote Maintenance Testing Equipment Building Automation Factory Automation Machine Automation The functionality of the tet/tpet series modules is almost the same as the PET The major difference is that the PET-7000 module supports user-de ned web HMI interface and more connections, while the tet/tpet series supports xed web interface for con guration, higher speed of 2-bit DI counters, frequency measurement, PWM digital output and low power consumption. Especially the tet/tpet series features tiny form factor and low channel count that are suitable in distributed I/O points applications, such as room control and monitor... etc. Push mode is a new way to transfer local DI status, immediately and automatically, to remote device or computer once the DI status changes. Without busy polling, push mode effectively reduces the network loading and improves the performance of the whole system. tet/tpet series supports both polling and push mode to transfer the I/O data over the network. No programming is required in the tet/tpet series, and the push mode can be easily enabled through the web con guration interface. The solution makes the user set up system easily and quickly, and the system work more ef cient. Features. DIO Pair-Connection (Mirror) The tet/tpet series Ethernet I/O modules support various I/O types, like photo-isolated digital input, power relay, PhotoMOS relay, and open collector output. The module can be used to create DI to DO pair-connection (mirror) through the Ethernet. Once the con guration is completed, the modules can automatically read the local DI status and write to remote DO via the Modbus TCP protocol in the background. -5- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO2.0.00

59 Remote I/O Modules and I/O Expansion Units 2. 2-bit High Speed Digital Counter Polling the remote DI status back and then counting the ON/OFF changes in host computer may get quantity errors caused by communication delay. The tet/tpet series module has Built-in 2-bit counter function; it counts the DI ON/OFF changes in site to prevent counting errors caused by the communication latency. The 2-bit counter of the tet/tpet modules can count up to 4,294,967,295 and accept a frequency up to,500 Hz (without low pass lter), so it is suitable for more applications such as production counting, button or switch ON/OFF counting, event counting... etc.. Frequency Measurement The tet/tpet module also supports frequency measurement function; it counts the DI ON/ OFF changes in a certain time period and then calculates the frequency automatically. Rather than polling remote DI status back and then computing the frequency in the host PC, our module can directly count out the frequency in site. This reduces the frequency errors caused by communication latency between two ends, and also reduces the network loadings. In order to applying for more applications, this module provides scan modes (0.s, s and single-pulse) and 4 moving average levels for user to select the best way in their applications. This feature can be used for rotation and speed measurements etc Easy Network Con guration DHCP minimizes configuration errors caused by manual IP address con guration, such as address con icts caused by the assignment of an IP address to more than one computer or device at the same time. The tet/ tpet series module supports the DHCP client function, which allows the tet/ tpet to easily obtain the necessary TCP/IP con guration information from a DHCP server. The module also contains a UDP responder that transmits its IP address information to a UDP search from the esearch utility program, making local management more ef cient. 4. PWM (Pulse Width Modulation) Digital Output The DOs on the tet/tpet series provide PWM (pulse width modulation) function that can be used in applications such as alarm light, flash light controls etc. Once the configuration is finished, the module will automatically and continuously switch the DO output ON and OFF. This removes the busy control by remote host and also reduces the network loadings. Users can set different frequency and duty cycle for the PWM function in each digital output channel. In addition, the DO can work independently or simultaneously. This function reduces the complexity of the control system and enhances the timing accuracy of pulse output. The series of Ethernet I/O modules features a powerful 2-bit MCU to enable efficient handling of network traffic. It also has a Built-in web server that provides an intuitive web management interface to allow users to modify the settings of the module including DHCP/Static IP, gateway and mask. 6. Dual Watchdog with Power-on and Safe Value The module provides dual watchdog: module watchdog (hardware function) and host watchdog (software function). The module watchdog automatically resets the module if the built-in rmware is operating abnormally, while the host watchdog sets the digital output with prede ned safe-value when there is no communication between the module and the host (PC or PLC) for a period of time (watchdog timeout). The dual watchdog is an important feature that ensures the module operates continuously, even in harsh environments. 7. PoE (Power over Ethernet) The tpet series module offers true IEEE 802.af-compliant (classi cation, Class ) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch such as the NS-205PSE. If there is no PoE switch on site, the module will also accept power input from a DC adapter. 8. Low Power Consumption The tet/tpet series is designed for ultra-low power consumption, reducing hidden costs from increasing fuel and electricity prices, especially when you have a huge amount of devices installed. Reducing the amount of electricity consumed by choosing energy-ef cient equipment can have a positive impact on maintaining a green environment. The module is equipped with removable terminal block connectors to allow easy wiring. For maximum space savings, the tet/tpet series is offered in an amazing tiny form-factor; this makes them can be easily installed in anywhere, even directly embedded into a machine. Website: sales@icpdas.com Vol. RIO

60 tet/tpet Series (IP based) 5-5- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO2.0.00

61 Remote I/O Modules and I/O Expansion Units Selection Guide 5 tet/tpet Selection Guide Digital I/O Model Name DI DO Ethernet PoE Channel Contact Sink/Source Channel Type Sink/Source tet-p6 tpet-p6 6 Wet Sink/Source tet-c4 tpet-c Open Collector Sink/NPN tet-a4 tpet-a Open Emitter Source/PNP tet-p2c2 tpet-p2c2 2 Wet Sink/Source 2 Open Collector Sink/NPN tet-p2a2 tpet-p2a2 2 Wet Sink/Source 2 Open Emitter Source/PNP Relay Output/Digital Input Model Name Relay Output DI Ethernet PoE Channel Relay Type Max. Load Current Channel Contact Sink/Source tet-p2por2 tpet-p2por2 2 PhotoMOS Relay Form A.0 A/channel 2 Wet Sink/Source tet-p2r2 tpet-p2r2 2 Power Relay Form A (SPST N.O.) 5.0 A/channel 2 Wet Sink/Source Website: sales@icpdas.com Vol. RIO

62 tet/tpet Series (IP based) Features Cost-effective Tiny Ethernet I/O Modules (Modbus TCP/UDP) 0/00 Base-TX Ethernet, RJ-45 x (Auto-negotiating, Auto MDI/MDIX, LED Indicators) Contains a Powerful 2-bit MCU Includes Redundant Power Inputs: PoE and DC Input Supports UDP Responder for Device Discovery Supports Web Configuration and Firmware Update Via Ethernet 5 Supports Latched DI, 2-bit DI Counters and Frequency Measurement Supports I/O Pair-connection Through the Ethernet Dual-watchdog with Power-on and Safe Value tet/tpet Series Made from Fire-retardant Materials (UL94-V0 Level) Low Power Consumption Tiny Ethernet I/O modules System Speci cations Model Name tet Series tpet Series Software Built-in Web Server I/O Pair Connection, Supports Polling and Push modes Communication Ethernet Port Protocol Security Dual Watchdog 0/00 Base-TX, 8-Pin RJ-45 x (Auto-negotiating, Auto-MDI/MDIX, LED indicators) Modbus TCP, Modbus UDP, HTTP, DHCP, BOOTP and TFTP IP lter (whitelist) and Password (web), Module (2 seconds) and Host (programmable) LED Indicators S System Running (Red) PoE (Green) Link/Act (Green), 0/00 M (Yellow) EMS Protection ESD (IEC ) EFT (IEC ) ±4 kv Contact for Each Terminal ±2 kv for Power and Signal Mechanical Dimensions (W x L x H) Installation 52 mm x 98 mm x 27 mm DIN-Rail Power Requirements Powered from Terminal Block, +2 ~ 48 VDC (non-regulated) Powered from PoE -, IEEE 802.af, Class Consumption VDC Max. for tet-p2r VDC Max. for tpet-p2r2 Environment Operating Temperature Storage Temperature Humidity -25 ~ +75 C -0 ~ +80 C 0 ~ 90% RH, Non-condensing -5-5 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO2.0.00

63 Remote I/O Modules and I/O Expansion Units I/O Speci cations Digital Input/Output Series Model Name tet-c4/tpet-c4 tet-a4/tpet-a4 Pictures Digital Output Channels 4 Type Open Collector Open Emitter Sink/Source (NPN/PNP) Sink Source Load Voltage +5 VDC ~ +0 VDC +0 VDC ~ +40 VDC Max. Load Current 00 ma/channel 650 ma/channel 5 PWM 00 Hz Max. (High/Low duty cycle range = 5 ~ 65,55 ms) Overvoltage Protection +60 VDC +47 VDC Short Circuit Protection - Isolation 750 Vrms Model Name tet-p6/tpet-p6 tet-p2c2/tpet-p2c2 tet-p2a2/tpet-p2a2 Pictures Digital Input Channels 6 2 Contact Sink/Source (NPN/PNP) On Voltage Level Off Voltage Level Input Impedance Wet Contact Sink/Source +0 VDC ~ +50 VDC +4 VDC Max. 0 k Max. Count: 4,294,967,285 (2 bits) Counters Max. Input Frequency:.5 khz Min. Pulse Width: 0.5 ms (without low pass lter) Overvoltage Protection Isolation +70 VDC 750 Vrms Digital Output Channels 2 Type Open Collector Open Emitter Sink/Source (NPN/PNP) Sink Source Load Voltage +5 VDC ~ +0 VDC +0 VDC ~ +40 VDC Max. Load Current - 00 ma/channel 650 ma/channel PWM 00 Hz Max. (High/Low duty cycle range = 5 ~ 65,55 ms) Overvoltage Protection +60 VDC +47 VDC Short Circuit Protection - Isolation 750 Vrms Website: sales@icpdas.com Vol. RIO

64 tet/tpet Series (IP based) Digital Input/Relay Output Series Model Name tet-p2por2/tpet-p2por2 tet-p2r2/tpet-p2r2 Pictures PhotoMOS/Power Relay Output Channels Type PhotoMOS Relay, Form A (SPST N.O.) Power Relay, Form A (SPST N.O.) Load Voltage 60 VDC/VAC 250 VAC/0 VDC 60 V/.0 A (Operating Temperature -25 ~ -40 C) Max. Load Current 60 V/0.8 A (Operating Temperature +40 ~ +60 C) 60 V/0.7 A (Operating Temperature +60 ~ +75 C) 5.0 A/channel at 25 C Operate Time. ms (Typical) 6 ms Release Time 0. ms (Typical) ms PWM 50 Hz Max. (High/Low duty cycle range = 0 ~ 65,55 ms) 5 A 250 VAC 0,000 ops (0 ops/minute) at 75 C VED Electrical Endurance 5 A 0 VDC 70,000 ops (0 ops/minute) at 75 C Long Life and No Spike (Resistive load) 5 A 250 VAC/0 VDC 6,000 ops UL A 250 VAC/0 VDC 00,000 ops Mechanical Endurance - 20,000,000 ops. At no load (00 ops./ minute) Isolation 000 Vrms Digital Input Channels 2 Contact Sink/Source (NPN/PNP) On Voltage Level Off Voltage Level Input Impedance Wet Contact Sink/Source +0 VDC ~ +50 VDC +4 VDC Max. 0 k Max. Count: 4,294,967,285 (2 bits) Counters Max. Input Frequency:.5 khz Min. Pulse Width: 0.5 ms (without low pass lter) Overvoltage Protection Isolation +70 VDC 750 Vrms Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These yback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these yback voltages at your inductive load by installing a yback diode for DC loads or a metal oxide varistor for AC loads. for DC loads for AC loads Diode Varistor Relay Load Relay Varistor Load Varistor Selection Operating Voltage Varistor Voltage Max. Peak Current 00 ~ 20 VAC 240 ~ 270 VAC > 000 A 200 ~ 240 VAC 440 ~ 470 VAC > 000 A -5-7 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO2.0.00

65 Remote I/O Modules and I/O Expansion Units Dimensions (Units: mm) Top View Left Side View Front View Right Side View Rear View Ordering Information tet Series tet-p6 CR Tiny Ethernet module with 6-channel DI (RoHS) tet-c4 CR Tiny Ethernet module with 4-channel DO (NPN, Sink) (RoHS) tet-a4 CR Tiny Ethernet module with 4-channel DO (PNP, Source) (RoHS) tet-p2c2 CR Tiny Ethernet module with 2-channel DI and 2-channel DO (NPN, Sink) (RoHS) Bottom View 5 tet-p2a2 CR tet-p2por2 CR tet-p2r2 CR Tiny Ethernet module with 2-channel DI and 2-channel DO (PNP, Source) (RoHS) Tiny Ethernet module with 2-channel DI and 2-channel Form A PhotoMos relay (RoHS) Tiny Ethernet module with 2-channel DI and 2-channel Form A relay (RoHS) tpet Series tpet-p6 CR tpet-c4 CR tpet-a4 CR tpet-p2c2 CR tpet-p2a2 CR tpet-p2por2 CR tpet-p2r2 CR Tiny Ethernet module with PoE, and 6-channel DI (RoHS) Tiny Ethernet module with PoE, and 4-channel DO (NPN, Sink) (RoHS) Tiny Ethernet module with PoE, and 4-channel DO (PNP, Source) (RoHS) Tiny Ethernet module with PoE, 2-channel DI and 2-channel DO (NPN, Sink) (RoHS) Tiny Ethernet module with PoE, 2-channel DI and 2-channel DO (PNP, Source) (RoHS) Tiny Ethernet module with PoE, 2-channel DI and 2-channel Form A PhotoMos relay (RoHS) Tiny Ethernet module with PoE, 2-channel DI and 2-channel Form A power relay (RoHS) Related Products NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +2 VDC ~ +56 VDC (RoHS) NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and RJ-45 Uplink (RoHS) NS-205PSE-24V CR Unmanaged 5-Port 0/00 Mbps PoE (PSE) Ethernet Switch; 24 VDC Input (RoHS) DIN-KA52F CR 24 V/.04 A, 25 W Power Supply with DIN-Rail Mounting (RoHS) DIN-KA52F-48 CR 48 V/0.52 A, 25 W Power Supply with Din-Rail Mounting (RoHS, for NS-205PSE) GPSU06U-6 24 V/0.25 A (max) Power Supply Website: sales@icpdas.com Vol. RIO

66 EtherCAT Products.6. EtherCAT Products Introduction EtherCAT Slave Device Ethernet Application Real Time Application EtherCAT (Ethernet for Control Automation Technology) is an open, high-performance Ethernet-based fieldbus system that makes internet technologies available at the I/O level. 6 Standard TCP/IP Stack TCP IP UDP Mailbox Ethernet PHY Acyclic Data EtherCAT MAC/DLL Process Data Ethernet PHY With EtherCAT, the controller can update the input and/or output information at the time when the data is needed. The ECAT-2000 is an Industrial EtherCAT Remote I/O module series. It is equipped with the EtherCAT protocol, and allows daisy chain connection, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. Appearance Features Power Indicator STA Indicator Digital I/O Indicator I/O Connector PWR LAN2 LAN F.G. GND +Vs Link/Act 0/00 Link/Act 0/00 Transfer protocol: EtherCAT Full compliance with Ethernet standards High efficiency & short refresh cycle 0/00 Base-TX Ethernet, RJ-45 x 2 Support Daisy Chain connection Removable terminal block connector LED display to indicate the I/O status Compact design saves space and simplifies installation Dimensions (Units: mm) Left Side View Front View Right Side View Rear View Top View Bottom View -6- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

67 Remote I/O Modules and I/O Expansion Units Selection Guide Product Interface Description ECAT-2045 EtherCAT I/O device, 6 DOs Isolated 6-channel DO EtherCAT I/O module ECAT-205 EtherCAT I/O device, 6 DIs Isolated 6-channel DI EtherCAT I/O module ECAT-2055 EtherCAT I/O device, 8 DIs, 8 DOs Isolated 8-channel DI and 8-channel DO EtherCAT I/O module ECAT-2060 EtherCAT I/O device, 6 DIs, 6 relay outputs Isolated 6-channel DI and 6-channel relay output EtherCAT I/O module ECAT-2045 Isolated 6-channel DO Module The ECAT-2045 is one of the ECAT-2000 Industrial EtherCAT Remote I/O module series. It provides 6-channel isolated digital outputs with 750 Vrms field to logic isolation, and is comprehensively used in many applications. 0/00 Base-TX Ethernet, RJ-45 x 2 Support Daisy Chain connection Removable terminal block connector Do load voltage: +0 ~ +40 VDC Do load current: 700 ma max. Provide short-circuit protection on DO 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) ECAT-205 Isolated 6-channel DI Module The ECAT-205 is one of the ECAT-2000 Industrial EtherCAT Remote I/O module series. It provides 6-channel isolated digital inputs with wide range of input voltage, and is comprehensively used in many applications. 0/00 Base-TX Ethernet, RJ-45 x 2 Support Daisy Chain connection Removable terminal block connector DI ON/OFF voltage level: +0 ~ +50 VDC / +4V max. 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) 6 Isolated 8-channel DI & 8-channel DO Module Isolated 6-channel DI & 6 Relay Output Module ECAT-2055 The ECAT-2055 is one of the ECAT-2000 Industrial EtherCAT Remote I/O module series. It provides 8 digital inputs and 8 digital outputs, and is suited in various industrial applications ECAT-2060 The ECAT-2060 is one of the ECAT-2000 Industrial EtherCAT Remote I/O module series. It provides 6 digital inputs and 6 relay outputs, and is suited in various industrial applications 0/00 Base-TX Ethernet, RJ-45 x 2 Support Daisy Chain connection Removable terminal block connector Do load voltage: +0 ~ +40 VDC Do load current: 700 ma max. Provide short-circuit protection on DO DI ON/OFF voltage level: +0 ~ +50 VDC / +4V max. 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) 0/00 Base-TX Ethernet, RJ-45 x 2 Support Daisy Chain connection Removable terminal block connector Relay contact rating: VAC, 2 0 VDC Relay operating time / release time: ms / 2 ms (typical) Relay minimum life: 500,000 ops DI ON/OFF voltage level: +4 ~ +0 VDC / +V max. 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) Website: sales@icpdas.com Vol. RIO

68 EtherNet/IP Products.7. EtherNet/IP Products Introduction EtherNet/IP is one of the open network standards; it uses all of the protocols of traditional Ethernet including the Transport Control Protocol (TCP), the Internet Protocol (IP) and the media access and signaling technologies. Building on standard Ethernet technologies means that Ethernet/IP will work transparently with all the standard Ethernet devices found today. The EIP-2000 is an Industrial EtherNet/IP Remote I/ O module series. It is equipped with the EtherNet/IP protocol, and allows daisy chain connection, making it possible to transfer data much faster during process control and other industrial automation applications. 7 PLC with EtherNet/IP scanner Module 00 m PC Servo drives Vision Sensor Encoder Modbus TCP EtherNet/IP Gateway (GW-7472) EtherNet IP I/O (EIP-2000) Modbus RTU Analog I/O Inverter ET-7000 M-7000 Appearance Features Power Indicator STA Indicator Digital I/O Indicator I/O Connector PWR Mode LAN2 LAN F.G. GND +Vs Init Run Link/Act 0/00 Link/Act Transfer protocol: EtherNet/IP 0/00 Base-TX Ethernet, RJ-45 x 2 Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols Support Daisy Chain connection Easy firmware update via Ethernet Removable terminal block connector RoHS compliant with Halogen-free LED display to indicate the I/O status 0/00 Dimensions (Units: mm) Left Side View Front View Right Side View Rear View Top View Bottom View -7- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

69 Remote I/O Modules and I/O Expansion Units Built-in Multi-function I/O All Digital Output modules provide additional functions which can be configured by EIP-2000 Utility: Power-On-Value On boot up, DO status is set to the Power-On-Value for few seconds. Safe-Value and Safe-Delay If the EtherNet/IP connection disconnected, the DO status with remain the last status for certain seconds which is set by Safe Delay then set to Safe-Value. All-in-one Module Various I/O components are mixed with multiple in a single module, which provides the most cost effective I/O usage and enhances performance of the I/O operations. All Digital Input modules provide additional functions: DI counters Every DI can be used as DI status and 2-bit low speed (5kHz) counters. The counts can be transferred or set zero by EtherNet/IP. 7 Selection Guide Product Interface Description EIP-2055 EtherNet/IP I/O device, 8 DIs, 8 DOs Isolated 8-ch DI and 8-ch DO EtherNet/IP I/O module EIP-2060 EtherNet/IP I/O device, 6 DIs, 6 relay outputs Isolated 8-ch DI and 4-ch relay output EtherNet/IP I/O module Isolated 8-channel DI & 8-channel DO Module The EIP-2055 is one of the EIP-2000 Industrial EtherNet/IP Remote I/O module EIP-2055 series. It provides 8 digital input and 8 digital output. The digital I/O of EIP-2055 supports built-in I/O functions such as DI counter and DO safe value etc. Isolated 6-channel DI & 6 Relay Output Module EIP-2060 The EIP-2060 is one of the EIP-2000 Industrial EtherNet/IP Remote I/O module series. It provides 6 digital input and 6 relay output. The digital I/O of EIP-2060 supports built-in I/O functions such as DI counter and DO safe value etc. 0/00 Base-TX Ethernet, RJ-45 x 2 Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols Support Daisy Chain connection Easy rmware update via Ethernet LED display to indicate the I/O status Do load voltage: +0 ~ +40 VDC Do load current: 700 ma max. Provide short-circuit protection on DO DI ON/OFF voltage level: +0 ~ +50 VDC / +4V max. 4 kv Contact ESD protection for any terminal Built-in Multi-function I/O: Power-On-Value. Safe-Value and Safe-Delay. DI counters. 0/00 Base-TX Ethernet, RJ-45 x 2 Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols Support Daisy Chain connection Easy rmware update via Ethernet LED display to indicate the I/O status Relay contact rating: VAC, 2 0 VDC Relay operating time / release time: ms / 2 ms (typical) Relay minimum life: 500,000 ops DI ON/OFF voltage level: +4 ~ +0 VDC / +V max. 4 kv Contact ESD protection for any terminal Built-in Multi-function I/O: Power-On-Value. Safe-Value and Safe-Delay. DI counters. Website: sales@icpdas.com Vol. RIO

70 PROFINET Products.8. PROFINET Products Introduction 8 Appearance Power Indicator SA Indicator S2A Indicator SB Indicator S2B Indicator Digital I/O Indicator I/O Connector PWR Mode LAN2 LAN F.G. GND +Vs Disable Enable Link/Act 0/00 Link/Act 0/00 PROFINET is the Ethernet based Automation Standard of PROFIBUS & PROFINET International (PI). It satisfies all requirements of automation technology. It is fit for factory automation, process automation, safety applications and motion control applications, etc. PROFINET allows existing field bus systems such as PROFIBUS DP, PROFIBUS PA, AS- Interface, INTERBUS and DeviceNet to be integrated without changes to existing field devices. It means the investments of field devices and applications are all protected. Features Transfer protocol: PROFINET I/O 0/00 Base-TX Ethernet, RJ-45 x 2 Supported Ethernet services: ICMP, IGMP, ARP, DHCP, TELNET, TFTP, SNMP, VLAN Priority Tagging Supported PROFINET services: RTC, RTA, CL-RPC, DCP, LLDP, I & M PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Alarm Type: Process, Diagnostic, Return of Sub Module Generic GSDML File Provided Dimensions (Units: mm) Left Side View Front View Right Side View Rear View Top View Bottom View Selection Guide Product Interface Description PFN-2045 PROFINET I/O device, 6 DOs Isolated 6-ch DO PROFINET I/O module PFN-205 PROFINET I/O device, 6 DIs Isolated 6-ch DI PROFINET I/O module PFN-2052 PROFINET I/O device, 8 DIs Ch-to-ch Isolated 8-ch DI PROFINET I/O module PFN-205 PROFINET I/O device, 6 DIs 6-ch Dry Contact DI PROFINET I/O module PFN-2055 PROFINET I/O device, 8 DIs, 8 DOs Isolated 8-ch DI and 8-ch DO PROFINET I/O module PFN-2060 PROFINET I/O device, 8 DIs, 4 relay outputs Isolated 8-ch DI and 4-ch relay output PROFINET I/O module -8- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO

71 Remote I/O Modules and I/O Expansion Units Isolated 6-channel DO Module Isolated 6-channel DI Module PFN-2045 The PFN-2045 is a DO device which follows the standard PROFINET I/O protocol. It provides 6-channel isolated digital outputs with 750 Vrms field to logic isolation. You can be access and configure it by using the GSDML file in any standard PROFINET Engineering tool. PFN-205 The PFN-205 is specially designed for PROFINET I/O device. It provides 6-channel isolated digital inputs with wide range of input voltage, and is comprehensively used in many applications. Through the GSDML file, it is easy to communicate with any standard PROFINET I/O controller. Protocol: PROFINET I/O Device PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Generic GSDML File Provided (Version 2.25) Do load voltage: +0 ~ +40 VDC Do load current: 700 ma max. Provide short-circuit protection on DO 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) Channel-to-channel Isolated 8-channel DI Module PFN-2052 The PFN-2052 is specially designed for the I/O device of PROFINET protocol. There are 8-channel isolated digital inputs with 5000 Vrms field to logic isolation in the PFN The GSDML file of the PFN-2052 help you building the PROFINET network with the standard PROFINET I/O controller easily and quickly. Protocol: PROFINET I/O Device PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Generic GSDML File Provided (Version 2.25) DI ON/OFF voltage level: +0 ~ +50 VDC / +4V max. 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) PFN channel DI Module The PFN-205 is a standard PROFINET I/O devices. It provide the GSDML file for standard PROFINET Engineering tool. There are 6-channel dry contact non-isolated digital inputs in the PFN-205. This type of DI module is usually applied with the switch, such as limit switch, button, photo switch, and so forth. 8 Protocol: PROFINET I/O Device PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Generic GSDML File Provided (Version 2.25) DI ON/OFF voltage level: +4 ~ +0 V / +V max Vrms isolation protection on each DI channel 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) Protocol: PROFINET I/O Device PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Generic GSDML File Provided (Version 2.25) DI ON/OFF voltage level: Open/close to Input type: Dry Contact, Source 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) Isolated 8-channel DI & 8-channel DO Module Isolated 8-channel DI & 4 Relay Output Module PFN-2055 The PFN-2055 is specially designed for PROFINET I/O device. It has 8-channel isolated digital inputs and 8-channel isolated digital outputs, and is suited in various industrial applications. You can access and configure it by using the GSDML file in any PROFINET Engineering tool. PFN-2060 The PFN-2060 is a standard PROFINET I/O devices. Through the GSDML file, it can be easily applied with any standard PROFINET IO controller. It provides 8-channel isolated digital inputs and 4-channel relay outputs. Therefore, you don t need to install the additional relay by yourself. It saves not only the installation space, but the time for wiring. Protocol: PROFINET I/O Device PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Generic GSDML File Provided (Version 2.25) Do load voltage: +0 ~ +40 VDC Do load current: 700 ma max. Provide short-circuit protection on DO DI ON/OFF voltage level: +0 ~ +50 VDC/+4V max. 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) Protocol: PROFINET I/O Device PROFINET Conformance Class B and RT Class Cyclic Time: ms (min) Generic GSDML File Provided (Version 2.25) Relay contact rating: VAC, 2 0 VDC Relay operating time/release time: ms/2 ms (typical) Relay minimum life: 500,000 ops DI ON/OFF voltage level: +4 ~ +0 VDC/+V max. 4 kv Contact ESD protection for any terminal Wide range of power input (+0 ~ +0 VDC) and operating temperature (-25 ~ +75 C) Website: sales@icpdas.com Vol. RIO

72 Ethernet/Fiber Switch.9. Ethernet/Fiber Switch Unmanaged Industrial PoE Ethernet Switch Model Name NS-05PSE NS-05PSE-24V NS-205PSE-24V NSM-205PSE-24V NSM-20PSE-24V NSM-208PSE-M2 Pictures 9 Speed 0/00 M Ethernet Port 2 - Ethernet Port with PoE Casing Plastic Metal with IP0 Metal with IP40 Operating Temperature -40 ~ +75 C Power Input +46 VDC~ +5 VDC +8 VDC ~ +2 VDC +46 VDC ~ +5 VDC Dimensions (W x L x H ) (Units: mm) 76 x 8 x 8 76 x 8 x 8 x x x 9 x x 9 x x 56 x 00 Unmanaged Industrial Ethernet Switch Model Name NS-208-IP67 NS-205A NS-05A NS-208A NSM-208A NSM-208-M2 Pictures Speed 0/00 M Port Casing Plastic Metal Metal with IP40 Operating Temperature -0 ~ +60 C -40 ~ +75 C Power Input +2 VDC ~ +5 VDC +2 VDC ~ +56 VDC +2 VDC ~ +48 VDC +2 VDC ~ +5 VDC Dimensions (W x L x H ) (Units: mm) 90 x 55 x 04 x 78 x x 8 x 8 x x x 9 x x 56 x 00 Unmanaged Industrial 0/00 Base-T(X) with 00 Base-FX Fiber Switch Model Name NSM-205AFT-T NSM-205AFC-T NSM-205AFCS-T NSM-206AFT-T NSM-206AFC-T NSM-206AFCS-T Pictures Mode Mulit-mode Mulit-mode Single-mode Mulit-mode Mulit-mode Single-mode Connector ST SC SC ST SC SC Fiber Port Speed 00 M Port 2 Speed 0/00 M Ethernet Port 4 Casing Metal Operating Temperature -0 ~ +75 C Power Input +2 VDC ~ +48 VDC Dimensions (W x L x H ) (Units: mm) 25 x x 68 High Reliability Industrial Ethernet Switch Catalog Managed Ethernet Switches Unmanaged Ethernet Switches PoE Ethernet Switches Media Converters Real-time Redundant Ring Ethernet Switches IP67 Waterproof Switches Cyber-Ring Ethernet Self-healing Technlolgy -9- ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. RIO