22 & 30mm Push Buttons, Selector Switches & LED Pilot Lights

Transcription

1 22 & 30mm Push Buttons, Selector Switches & LED Pilot Lights

2 22mm 22mm Non Illuminated Metal Operators Altech orp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call. Operator Type Included Mounting Bracket Flush Booted Projecting Mushroom Spring Push/Pull* Latch Return with arrow indicator Push buttons olor White Black Green Red Blue Yellow 2AF1 2AF2 2AF3 2AF4 2AF6 2AF8 2AB1 2AB2 2AB3 2AB4 2AB6 2AB8 For push button and selector switch dimensions see page 7. 2AP1 2AP2 2AP3 2AP4 2AP6 2AP8 2AM2 2AMPP2 2AML2 2AM3 2AM4 2AMPP4 2AML4 2AM6 2AM8 *Illuminated available, please contact Altech. S2 normally closed contact shown. Switch ontacts Panel Mount Normally Open Silver Normally losed Silver Normally Open Gold Normally losed Gold S1 S2 S3 S4 ertified for type 4X, 12 environment. S1 normally open contact shown. Base Mount (for use with thermoplastic enclosures listed on page 5) Normally Open Silver S5 Normally losed Silver S6 Normally Open Gold S7 Normally losed Gold S8 Notes: Up to six switch contacts can be installed on any non illuminated operator. Up to four switch contacts can be installed on any illuminated operator. 2 Altech orp, 35 Royal Road, Flemington, NJ

3 22mm Non Illuminated Metal Operators Mushroom/ Latch with Key Twin Touch Key Selector Selector Extended Selector Push buttons Selector Switches 2AMLKB2 2AMLKB4 Green/Red 2ATF3-F4-IO Green/ ExtendedRed 2ATF3P4 2AK2-XX 2AS2-X 2AS2E-X Key Selector 2 A K 2 Function odes Key Removal Ser. No. Function Left enter Right 01 Maintained Maintained Maintained Spring Return Maintained Maintained Maintained... Dimensions 08 Spring Return Spring Return Spring Return... Non Illuminated Selector Function odes Ser. No. 2 A S 2 Function 1 Maintained 2 Spring Return 3 Maintained 4 Spring Return 5 Spring Return 6 Spring Return Non Illuminated Extended Selector 2 A S 2 E Function odes Ser. No. Function 1 Maintained 2 Spring Return 3 Maintained 4 Spring Return 5 Spring Return 6 Spring Return (fax) info@altechcorp.com 3

4 22mm LED Illuminated Operators & Pilot Lights Included LED Bulb, Bulb Holder, Mounting Hardware Selector Projecting Flush Twin Touch LED Pilot Light Selector Switch Push buttons LED Pilot Lights olor White Green Red Amber Blue lear* Yellow 2ASL1LB-X-XXX 2ASL3LB-X-XXX 2ASL4LB-X-XXX 2ASL5LB-X-XXX 2ASL6LB-X-XXX 2ASL7LB-X-XXX* 2ASL8LB-X-XXX 2ALP1LB-XXX 2ALP3LB-XXX 2ALP4LB-XXX 2ALP5LB-XXX 2ALP6LB-XXX 2ALP7LB-XXX* 2ALP8LB-XXX 2ALF1LB-XXX 2ALF3LB-XXX 2ALF4LB-XXX 2ALF5LB-XXX 2ALF6LB-XXX 2ALF7LB-XXX* 2ALF8LB-XXX Green/Red 2ATL5LB F3F4-XXX 2PLB1LB-XXX 2PLB3LB-XXX 2PLB4LB-XXX 2PLB5LB-XXX 2PLB6LB-XXX 2PLB7LB-XXX* 2PLB8LB-XXX *Supplied with yellow LED 2 A S L L B olor odes No. olor 1 White 3 Green 4 Red 5 Amber 6 Blue 7 lear 8 Yellow Function odes Ser. No. Function 1 Maintained 2 Spring Return 3 Maintained 4 Spring Return 5 Spring Return Voltage odes 012 = 12VA/D 024 = 24VA/D 048 = 48VA/D 110 = 110VA/D 230 = 230VA/D Note: All LED pilot lights and illuminated actuators at a specified voltage will operate on either A or D. Voltage odes 012 = 12VA/D 024 = 24VA/D 048 = 48VA/D 110 = 110VA/D 230 = 230VA/D 6 Spring Return All illuminated operators and pilot lights are supplied with LED. ertified for type 4X, 12 environment. Notes: Up to four switch contacts can be installed on any illuminated operator. Up to six switch contacts can be installed on any non illuminated operator. For push button and selector switch dimensions see page 7. 4 Altech orp, 35 Royal Road, Flemington, NJ

5 22mm Enclosures For use with panel mount switch contacts For use with base mount switch contacts All enclosures rated NEMA 4X, 12 ast Aluminum Series Thermoplastic Series Operator olor onstruction Dimensions able No. of Mounting apacity Top/ Bottom (LxWxH) mm* Entry Size Knockouts Hole Dia A-12 1 Gray ast Aluminum 70 x 90 x 90 1 x M20 x 1.5mm 8 mm Gray ast Aluminum 70 x 90 x x M20 x 1.5mm 8 mm E-12 3 Gray ast Aluminum 70 x 90 x x M20 x 1.5mm 8 mm A-12 1 Gray ast Aluminum 52 x 80 x 90 2 x M20 x 1.5mm 6 mm Gray ast Aluminum 52 x 80 x x M20 x 1.5mm 6 mm E-12 3 Gray ast Aluminum 52 x 80 x x M20 x 1.5mm 6 mm Q-11 1 White/ Black Thermoplastic 50.5 x 68 x 68 2 x 21mm Q-10 1 Yellow/ Black Thermoplastic 50.5 x 68 x 68 2 x 21mm R-11 2 White/ Black Thermoplastic 50.5 x 68 x104 2 x 21mm R-10 2 Yellow/ Black Thermoplastic 50.5 x 68 x104 2 x 21mm 2 ustom assemblies available. ontact Altech for custom imprinting, enclosure color options, custom legend plates and prewired push button stations. * To convert mm to inches, divide mm by Dimensions for metal enclosures do not include mounting ears. E-Stop Shroud for 22 mm onstruction 2ESS1 Polimer Plastic 2ESS1-UL UL Plastic (fax) info@altechcorp.com 5

6 ontrol and Signalling devices Ø 22.5 This range of Ø 22.5 push buttons, selector switches, illuminated switches, illuminated selector switches and pilot lights have been designed to provide the following salient features: Economy of space Aesthetically pleasing Self Wiping ontact Heavy duty construction Safe in operation Shrouded terminals Simple to mount (screw driver is all that is required) Very good flame resistance Fixing method unaffected by excessive vibration-unit Use of LEDs for long life and minimum does not rotate maintenance Protection against electric shock (unit grounded) Actuators The circular actuators have chrome plated metal bezels, and are interchangeable on the different types of contact elements. ontact Elements The contact elements are double break and have self wiping contacts. The elements are interchangeable and can be stacked without additional hardware. 1 to 6 elements (NO or N) can be used with non illuminated actuators, whereas, 1 to 4 elements (NO or N) can be used for illuminated actuators. Gold plated NO and N contact elements for low voltage, low current switching circuits < 25 ma, are available. LED Illuminated Actuators and Pilot Lights LED illuminated actuators & pilot lights are supplied, LED in bayonet cap suitable for operating at various voltages. LED bulbs with bayonet cap are constructed in the standard BA9S design with OAL max. 28 mm. Terminals ontact elements and pilot lights are designed to have shrouded terminals with combination flat/phillip screws. Fixing The control devices Ø 22.5 can be fixed in any position on panels of 1 to 6 mm ( in.) thickness. We recommend minimum fixing centers of 30 x 40 mm (1.2 x 1.57 ). However, the dimensions and configuration should be decided on the basis of the application. The actuators and the lens assemblies lock on to the holding bracket using a bayonet type of fixing which enables a simple and fast assembly. The complete assembly is locked into position on the panel by two M4 pointed screws on the bracket, tightened equally from the rear. The screws should be tightened adequately to such an extent as to pierce through the paint on the panel from inside. These screws also ensure the grounding of the unit. Electrical and Mechanical haracteristics Environment Standard conformity: IE Approvals: VDE06 SA No , UL508, IE (1) 1990, IS ASTA UK certified as per IE (1) 1990 SA No , UL508 Degree of protection: IP 65 as per IE 5, NEMA 4X, 12 as per UL 508 Ambient : - 25 to + 70 Operating position: All positions ontact Block Rated insulation voltage: Rated thermal current: ontact operation: Make and break capacity as per IE (1) 1990: As per SA No , UL508: Terminal capacity: Terminal marking: Short circuit protection: Mechanical life: Electric rating (for 1 million operation cycles, operation at 30 cycles per hour, load factor 0.5) Modules for pilot light & illuminated switches with bulb LED urrent consumption (applicable to all colors) 24 VA/D, 100 VA & 240 VA: max. 20 ma 110 VD: max. 15 ma 220 VD: max. 10 ma Service life (at nominal voltage and at ambient temperature of 25 ): Voltage limits (nominal voltage): Short circuit protection: Terminal capacity: 22mm LED Illuminated Operators & Pilot Lights 500V 10A Self wiping, slow break NO or N 43mm 24mm 24mm (1.7") (.94") (.94") 30 mm (1.2") Fixing Arrangement 40 mm (1.57") Ø22.5 DIN A 15 4A, 415V A D A, 110V D A0 Q0 minimum 1 x 0.5 mm 2 (20 AWG), maximum 2 x mm 2 (2x16 AWG) or 1 x 2.5 mm 2 (1x14 AWG) 1-2 for N, 3-4 for NO 10A cartridge fuse HR type, rated for resistive loading Over 1 million operations V V A 15 D 13 A A ,000 hours <20% of rated voltage> on specific request min. 1 x 0.5 mm 2 (20 AWG), max. 2 x 1.5 mm 2 (2x16 AWG) or 1 x 2.5 mm 2 (1x14 AWG) Altech orp, 35 Royal Road, Flemington, NJ x30 (1.6x1.2") 6

7 22mm LED Illuminated Operators & Pilot Lights Accessories and Spares Legend plates 30 x 40 mm (1.2 x 1.6 ) (black with white characters) are supplied with the following standard texts: START FORWARD UP OPEN AUTO SLOW RESET ON RIGHT TRIP 2LP01 2LP03 2LP05 2LP07 2LP09 2LP11 2LP13 2LP15 2LP17 2LP19 STOP REVERSE DOWN LOSE HAND FAST INH OFF LEFT POWER ON 2LP02 2LP04 2LP06 2LP08 2LP10 2LP12 2LP14 2LP16 2LP18 2LP20 START/STOP UP/DOWN ON/OFF REV/FWD AUTO/HAND LOAL/REMOTE I/II O/I 2LP28 2LP 2LP30 2LP31 2LP32 2LP33 2LP34 2LP35 HAND/O/AUTO SLOW/OFF/FAST UP/OFF/DOWN I/O/II BLANK EMERGENY STOP 2LP36 2LP37 2LP38 2LP39 2LP40 2LP41 ustom Legends per customer specifications - 2LPXX Legend plate Ø mm yellow with black characters Lenses and Replacement Boots for EMERGENY STOP. olor White Green Red Amber Blue lear Yellow Lenses for pilot lights 2PLL1L 2PLL3L 2PLL4L 2PLL5L 2PLL6L 2PLL7L 2PLL8L with LED Lenses for illuminated 2LAL1L 2LAL3L 2LAL4L 2LAL5L 2LAL6L 2LAL7L 2LAL8L actuators with LED (flush/projecting) Boots for 2BT2 2BT3 2BT4 2BT6 2BT8 booted actuators Replacement LED Bulbs olor White Green Red Amber Blue Yellow Voltage Type No. MB24 MB9324 MB9424 MB9524 MB9624 MB MB110 MB93110 MB94110 MB95110 MB96110 MB MB230 MB93230 MB94230 MB95230 MB96230 MB Ø22.5 Ø mm EMERGENY STOP 40 mm Ø.5 Push Push mechanism for converting spring return actuator into maintained Type No.: 2PPM Adapter for fixing Ø 22.5 devices in Ø 30.5 cutout Type No.: 2ADP Mounting Bracket Type No.: 2BRK Type No.: 2BKKT (Thin Bracket for Plastic Enclosure) Padlock For mushroom actuator: Type No.: 2PAM For projecting actuator: Type No.: 2PAP 30.5 mm Transparent Silicone Rubber Boot for Flush Actuators olor: lear Type No.: 2BT mm Rubber Boot for Twin Actuator olor: lear Type No.: 2ATBT7 (non illuminated) 2ATLBT7 (illuminated) Blanking plug for 22.5 mm holes olor: Black Type No.: 2BP2 Bulb Extractor Type No: 2BA9SE Push button Diagrams (to convert to inches multiply by ) Non-Illuminated Flush Non-Illuminated Projecting Non-Illuminated Mushroom Non-Illuminated Key Mushroom Non-Illuminated Double Head Flush Non-Illuminated Key Selector Non-Illuminated Selector & Extended Pilot Light (Extended) Illuminated Selector Illuminated Projecting Illuminated Flush Illuminated Double Head Flush (fax) info@altechcorp.com 7

8 30mm 30 mm Push Buttons Flush Non Illuminated Flush Illuminated Booted Projecting Selector Maintained Filament Bulb LED Bulb 2 3 Position Position 2 Position olor White Black Green Red Amber Blue lear* Yellow AF1 AF2 AF3 AF4 AF6 AF8 ALF1-XXX ALF3-XXX ALF4-XXX ALF5-XXX ALF6-XXX ALF7-XXX ALF8-XXX ALF1LB-XXX ALF3LB-XXX ALF4LB-XXX ALF5LB-XXX ALF6LB-XXX ALF7LB-XXX* ALF8LB-XXX AB1 AB2 AB3 AB4 AB6 AB8 AP1 AP2 AP3 AP4 AP6 AP8 AS2-2P AS2-3P AS2-2PSR * ALF7LB-XXX supplied with yellow LED Note: All LED pilot lights and illuminated actuators at a specified voltage will operate on either A or D. Voltage odes 024 = 24V A/D 048 = 48V A/D 110 = 110V A/D 230 = 230V A/D See diagam below. ertified for type 4X, 12 environment. Note: Up to 4 contact blocks may be installed on any non illuminated actuator. This will give the user up to 4 NO and 4 N contacts. With an illuminated actuator (ALF series), 2 contact blocks may be installed. 30 mm ontact Elements S11 S12 Description 1 Normally Open + 1 Normally losed S11 Silver ontacts 2 Normally Open + 2 Normally losed S11 + S12 Silver ontacts For additional contacts, ontact Installation Screws see diagram at right. *When using more than two contacts additional screws need to purchased separtely Type Dimensions S25 M4 x 25 mm S45 M4 x 45 mm S65 M4 x 65 mm Used with S11 S12, S11 + S12 2x S11 + S12 (S45 and S90). S90 M4 x 90 mm 2x S11 + 2x S12 1NO + 1N S11 contact S12 2NO + 2N S11 + S12 contact * * S12 3NO + 3N 2x S11 + S12 contact + S65 4NO + 4N 2x S11 + 2x S12 contact + S90 S12 S12 8 Altech orp, 35 Royal Road, Flemington, NJ

9 30 mm Push Buttons Mushroom with Key Mushroom with Indicating Arrows Press to Lock, Turn to Release Mushroom Key Press to Lock, Key to Release Key to Lock, Key to Release AMLKB2 AMLKB4 AMKB2 AMKB4 AML2 AML4 AM1 AM2 AM3 AM4 AK2-XXXXX AM6 AM8 haracteristics Environment Ambient Temperature Storage deg -25 to +70 Degrees of Protection onforming to IE 5 IP65 Mechanical Life All push buttons except 1 in millions of maintained mushroom operating cycles maintained mushroom 0.3 Mechanical haracteristics of contact elements ontact Operation N+NO Double break, self wiping Rated Insulation Voltage 500 V A Operating Travel Push buttons hanging N state 2.4mm hanging NO state 4.3mm Travel 8.7mm Terminal apacity abling 2x1.5 sq.mm (2x16 AWG) or 1x2.5 sq.mm (14 AWG) ontact Material Bimetal (u/ag) Standard single element Short ircuit Protection onforming to IS6875-II 10A HR fuse Rated Make Break UL508, A0 Q0, standard block with screw clamp ratings terminals 415V, 10A standard block with screw clamp terminals 220V, 2A Dielectric Strength Push Buttons, Pilot Lights 2500V for 1 minute A K 2 Function odes Ser. No. Function 2PB Maintained 2POSR 2PI Maintained 2PO Maintained 3PB Maintained 3P Maintained Key Removal Function Both Positions Left Position Right Position Left Position Left and Right Position enter Position Pilot Lights ertified for type 4X, 12 environment. olor Filament LED X X X Note: All LED pilot lights and illuminated actuators at a specified voltage will operate on either A or D. White Green Red Amber Blue lear Yellow PLB1-XXX PLB3-XXX PLB4-XXX PLB5-XXX PLB6-XXX PLB7-XXX PLB8-XXX PLB1LB-XXX PLB3LB-XXX PLB4LB-XXX PLB5LB-XXX PLB6LB-XXX PLB7LB-XXX* PLB8LB-XXX Voltage odes 024 = 24VA/D 048 = 48VA/D 110 = 110VA/D 230 = 230VA/D * supplied with yellow LED (fax) info@altechcorp.com 9

10 30 mm Push Buttons and LED Pilot Lights Accessories and Spares Legend plates 30 x 40 mm (1.2 x 1.6 ) (black with white characters) are supplied with the following standard texts: START FORWARD UP OPEN AUTO SLOW RESET LP01 LP03 LP05 LP07 LP09 LP11 LP13 ON RIGHT TRIP STOP REVERSE DOWN LOSE LP15 LP17 LP19 LP02 LP04 LP06 LP08 HAND FAST INH OFF LEFT POWER ON LP10 LP12 LP14 LP16 LP18 LP20 Legend plate mm diameter yellow with black characters for EMERGENY STOP Ø.5 Padlock For mushroom actuator: For projecting actuator: Type No.: PAM Type No.: PAP Lenses and Replacement Boots olor Trans/White Green Red Amber Blue lear Yellow Lenses for pilot lights PLL1 PLL3 PLL4 PLL5 PLL6 PLL7 PLL8 Lenses for illuminated ALL1 ALL3 ALL4 ALL5 ALL6 ALL7 ALL8 actuators Rubber Boots for Booted Actuators olor White Black Green Red Blue Yellow Boot BT1 BT2 BT3 BT4 BT6 BT8 Ø30.0 EMERGENY S TO P Type LP41 Spare LED Bulbs olor 24V A/D 48V A/D 110V A/D 230V A/D White MB15124 MB15148 MB MB Green MB15324 MB15348 MB MB Red MB15424 MB15448 MB MB Amber MB15524 MB15548 MB MB Blue MB15624 MB15648 MB MB Yellow MB15824 MB15848 MB MB Bulb Extractor Type No: 2BA9SE Spare Filament Bulbs 24V A/D 48V A/D 110V A/D 230V A/D BA15D24 BA15D48 BA15D110 BA15D230 ontact Block Installation Screws Type Dimensions used with S25 M4 x 25 mm S11 only S45 M4 x 45 mm S12, S11 + S12 (2NO + 2N) S65 M4 x 65 mm 2 x S11 + S12 (3NO +3N) S90 M4 x 90 mm 2 x S x S12 (4NO +4N) 30mm Enclosures ast Aluminum Series All enclosures rated NEMA 4X, 12 Operator olor onstruction Dimensions able Mounting apacity Top/ Bottom (LxWxH) mm* Entry Size Hole (Dia.) A-12 1 Gray ast Aluminum 70 x 90 x 90 1 x M20 x 1.5 mm 8 mm Gray ast Aluminum 70 x 90 x x M20 x 1.5 mm 8 mm E-12 3 Gray ast Aluminum 70 x 90 x x M2 0x 1.5 mm 8 mm * To convert mm to inches, divide mm by Altech orp, 35 Royal Road, Flemington, NJ

11 30 mm Push Button Diagrams NON-ILLUMINATED FLH PHBUTTON Ø35 ILLUMINATED PHBUTTON NON-ILLUMINATED BOOTED PHBUTTON NON-ILLUMINATED PROJETING PHBUTTON Ø Ø40 19 Ø Ø40 Ø40 Ø40 Ø Ø35 Ø NON-ILLUMINATED SELETOR PHBUTTON (2POSITION OR 3 POSITION) NON-ILLUMINATED MHROOM PHBUTTON LATHING, KEY TO RELEASE NON-ILLUMINATED MHROOM PHBUTTON LATHING TURN TO RELEASE NON-ILLUMINATED MHROOM PHBUTTON (SPRING RETURN) 48 NON-ILLUMINATED KEY SELETOR PILOT LIGHT 55.3 (to convert to inches multiply by ) (fax) info@altechcorp.com 11

12 w w w. a l t e c h c o r p. c o m PRODUT LINES Miniature e ircuit Breakers DIN Enclosures Electronic Enclosures European Fuses Foot Switches Inductive Proximity Sensors Industrial Enclosures Interface Modules Liquid Tight T Strain Reliefs Metal Detection Systems Motor Disconnect Switches Pin and Sleeve Devices Push Buttons Safety Relays Terminal Blocks Safety Relays Altech orporation 35 Royal Road Flemington, NJ Phone (908) Fax (908) Altech orp M