Series mm 21 x 21 mm 21 x 27 mm IP65 3 A 250 VAC. Product Profile. Ordering Guide Choice of front bezel determines front shape

Transcription

1 Series 7.5 mm x mm x 7 mm IP V INDITOR pushbutton keylock selector hoose one component from each of the coloured sections to assemble a complete switch. Product Profile The Series 7 is a high quality, modular switch range that includes pushbuttons, indicators, selector switches and keylock switches in flush mount with self cleaning snap-action switching elements. The switching elements may be soldered directly onto the P and the actuators are lockable with an interlocking pin, no spacing pins needed. Technical data see page 4 IP65 Protection Switch Rating, 3, 50 V Flush Mounting into.5 mm, x mm and x 7 mm cut out Illumination using midget-grooved T3/4 lamps or single chip LED s ll standard lenses are transparent with translucent diffuser available in different colours For keylock switches 35 different keys are available Indicator LED ccessories ccessories Ordering Guide hoice of front bezel determines front shape For a complete indicator you will need to order the appropriate contact block, LED, lens and bezel Illuminated pushbutton LED ccessories ccessories For a complete illuminated pushbutton you will need to order the appropriate contact block, LED, lens and bezel Keylock switch ccessories ccessories For a complete keylock switch you will need to order the appropriate contact block and bezel Selector switch LED ccessories ccessories For a complete selector switch you will need to order the appropriate contact block, LED, lever and bezel 0

2 .5 mm x mm x 7 mm IP V Series 7 hoose one component from each of the coloured sections to assemble a complete switch. ELEMENT LED accessories Indicator Illuminated pushbutton Keylock switch Indicator body for flush mount, black plastic Part No Illuminated flush mount pushbutton actuator, round, black plastic Part No. Function Momentary Maintained Keylock switch actuator, position for flush mount Mom. 4 Maint. 90 Graphic Part No. Function Key rem /D Momentary 7-6.0/D Maintained /D Maintained /D Maintained + Keylock switch Selector switch ontact block Keylock switch actuator, 3 position for flush mount Selector switch actuator, and 3 position for flush mount Mom. 4 Mom. 4 / Maint. 90 Maint. 90 Graphic Part No. Function Key rem /D Momentary/Momentary /D Momentary/Maintained /D Momentary/Maintained /D Maintained/Momentary /D Maintained/Momentary / /D Maintained/Maintained /D Maintained/Maintained /D Maintained/Maintained /D Maintained/Maintained Mom. 4 Maint. 90 Mom. 4 Maint. 90 Maint. 90 / Mom. 4 Graphic Part No. Function Positions Momentary Maintained Momentary/Momentary Momentary/Maintained Maintained/Momentary Maintained/Maintained 3 Indicator Element and Switching Element. Interlocking pin for P assembly supplied with each element Image Part No. ontact type Product description Indicator element NO/N NO/N

3 Series 7.5 mm x mm x 7 mm IP V INDITOR pushbutton keylock selector hoose one component from each of the coloured sections to assemble a complete switch. LED ccessories LED, T¾ MG, Volt and 8 Volt. (lso available in 6 Volt, 4 Volt and 48 Volt) Lens, plastic for flush mount rectangular indicator and pushbutton actuators Lens, plastic for flush mount round indicator and pushbutton actuators olour Part No. Voltage Red 0-J09.06 V/D, 7/4m Yellow 0-J V/D, 7/4m Green 0-J V/D, 7/4m lue 0-J V/D, 7/4m White 0-J V/D, 7/4m Red 0-J3.06 8V/D, 7/4m Yellow 0-J V/D, 7/4m Green 0-J V/D, 7/4m lue 0-J V/D, 7/4m White 0-J V/D, 7/4m olour Part No. Size Red x 30 mm Yellow x 30 mm Green x 30 mm lue x 30 mm lear x 30 mm olour Part No. Size Red mm Yellow mm Green mm lue mm lear mm ccessories 3 Lens, plastic for flush mount square indicator and pushbutton actuators olour Part No. Size Red x 4 mm Yellow x 4 mm Green x 4 mm lue x 4 mm lear x 4 mm Lever for selector switch, flush mount, coloured lever bar options available as indicated olour Part No. Red Yellow Green lue White lack Keylock switch front bezel, black plastic Image Part No. Size x 30 mm x 4 mm mm

4 .5 mm x mm x 7 mm IP V Series 7 hoose one component from each of the coloured sections to assemble a complete switch. ELEMENT LED accessories ccessories 3 3 Front bezel set for flush mount indicator, illuminated pushbutton and square and rectangular keylock switch 4 Image Part No. Material Size Plastic black 5 mm luminium nat. 5 mm Plastic black 4 x 30 mm Plastic black 4 x 4 mm Front bezel set for round flush mount selector, keylock switch and square selector switch Image Part No. Material Size Plastic black 5 mm Plastic black 4 x 4 mm luminium nat. 5 mm Flap guard, flush mount 3 Image Part No. for switch x 30 mm x 4 mm mm ccessories 3 3 lanking plate Lens remover for flush mount, mounting tool and LED remover Image Part No. Mounting hole mm x 7 mm x mm Image Part No. Product description Lens remover for flush mount Mounting tool LED remover 3

5 Series 7 Technical Data System switch 7 Switching system Self-cleaning, double-break snap-action switching system with one N- (Normally closed) and one NO-contact (Normally open). Material Lens Polycarbonat (P), as per UL 94 V0, or luminium anodized Front bezel Polyetherimid (PEI), as per UL 94 V0, or luminium anodized Material of contact gni, µm gold plated Polyethylene terephthalate (PETP), as per UL 94 V0 ctuator housing Polyetherimide (PEI), as per UL 94 V0 Mechanical characteristics Terminals P terminal, rass gold plated ctuating torque Selector-/Keylock switch ctuating force Pushbutton N... 3 N 4 Ncm... 8 Ncm ctuating travel Pushbutton 3 mm Selector-/keylock switch positions 3 positions Momentary action approx. 4 approx. x 4 Maintained action approx. 90 approx. x 90 Rebound time ms Mechanical lifetime Pushbutton maintained action million cycles of operation Pushbutton momentary action million cycles of operation Keylock switch cycles of operation Selector switch cycles of operation Resistance to heat of soldering Manual soldering 350, 3 sec. Flow soldering 60, 5 sec. Electrical characteristics ontact resistance Starting value (initial) Isolation resistance 0 Ω Switch rating Switch rating cosφ Voltage 50 V urrent 3 50 mω Switch rating D Voltage 4 VD 50 VD urrent Recommended minimum operational data Voltage 5 V urrent 0 m Electric strength 000 V, 50 Hz, min. between all terminals and earth Environmental conditions Storage temperature Operating temperature Protection degree Frontside IP65 Shock resistance (semi-sinusoidal) max. 500 m/s², pulse width ms, 3-axis, as per EN IE Vibration resistance (sinusoidal) max. 00 m/s² at 0 Hz Hz, as per EN IE limate resistance Damp heat, state 56 days, +40 / 93% relative humidity, as per EN IE pprovals Declaration of conformity E 4

6 Technical Drawings Series 7 7 Indicator Illuminated, Pushbutton Flush, Round, Square, Rectangular 5.5 max..6 max. 4 x 30 mm Ø 5 mm 4 x 4 mm Keylock switch Flush, Round, Square, Rectangular max..6 max. 4 x 30 mm Ø 5 mm 4 x 4 mm Selector switch Flush, Round, Square, Rectangular max..6 max. 4 x 4 mm Ø 5 mm

7 Series 7 Technical Drawings 7 ut-outs Indicator, Pushbutton Flush, Keylock Flush, Selector Flush 7 P Layout Indicator, Pushbutton Flush, Keylock Flush, Selector Flush Front size min. Drilling plan (Elementside) Through-connection recommended Hole Ø. Pad.8 x Ø 3.5 Hole Ø. Pad Ø.4 Position interlocking pin Note: Pitch of the print circuit board hole Ø3.5 must agree with the mounting holes on the front plate Layout Lamp cathode (-) Lamp anode (+) 3 ontact normally closed 4 ontact normally open 5 Hole for interlocking pin Illumination element