SuperWiper TM 8 Field Unit - A SECURE ERASER Unit 4 x SAS and 6 x USB3.0-8 Touchscreen color LCD display Linux Base

Transcription

1 SuperWiper TM 8 Field Unit - A SECURE ERASER Unit 4 x SAS and 6 x USB3.0-8 Touchscreen color LCD display Linux Base (SWM-0016) The SuperWiper 8 Field unit (The Only Mobile MediaClone Erase products that Supports SAS hard disk drives) is a very compact field unit with high speed data erase capabilities, featuring four SAS interface ports and six USB3.0 ports, 1Gigabit Ethernet port, esata port, DP port, and 8 touchscreen color LCD display. The application supports SECURITY ERASE mode of operation that is the most recommended for erase SSD drives. Also Support DoD erases protocol. It use a multi sessions simultaneous erase operations where each port act as a separate independent operation. No down time and it perfect tool as a hand carry erase device. The unit can erase 10 Storage Devices in parallel. Features: Dedicated Secure Unit: the unit is dedicated to preform erases/format data HDD and any other storage devices. (HDD, SSD, USB storage, Multi-Media-Cards) Mobile, small, and lightweight 8 (800x600) resistive touch screen color LCD display Erase up to 10 Devices in parallel. Very fast erase operation: validated with SSD ADATA SP900 erase speed at 29GB/in, and with 1TB WD blue at 10GB/min Locked-in and keyed DC-in connector to avoid accidentally disconnecting the unit s power SAS cables are with thumb screws to secure hard disk drives to the main unit and to avoid accidentally disconnecting the power of the HDD.

2 OS: Linux Ubuntu bit GUI: Large icons and easy to navigate HPA/DCO automatic supports: Open HPA and DCO areas on the drive and erase it content Bad Sectors handling: User have the choice to set skip bad sectors or abort operation Device interface: SAS, SATA, e-sata enclosures, IDE, USB2.0, USB3.0 (IDE support via SATA to IDE adapter kit), SCSI(via Expansion Box Option), 1394(via Express Port Option), PCIE(via Express Port Option), Mini-PCIE(via Express Port Option) Supports hot plug SAS/SATA/USB/SCSI*/1394*/Mini- PCIE*(M2.NGFF) hard disk drives. Device Form factor: o 3.5 inch o 2.5 inch o ZIF o 1.8 o Micro-SATA o Mini - SATA o MMC Support Erase hard disk drives protocols: DoD M, Security Erase (supports by SATA hard disk drives that MFG after year 2000), User defines their own erase parameters (DoD and Security erase operations are NIST compliance) Erases memory cards (MMC): With the use of USB flash card reader. (Use only passthrough command adapters in order to display serial number of the device) Erase Cellphone if support mass storage protocols Most efficient operation with 2 suggested operation methods: 1. Continues mode: A user can run continues erase operations with multi-session operation. (The number of sessions limited to the number of available CPU cores, which is 4 for this unit). Each port, whether SATA or USB, can be used as an independent session for erase operation. A user plugs a device into a selected port and run a session with erase operation on the selected port. The user can abort the operation in the middle of the run, independent of other running sessions. When an erase session on the selected port is completed successfully, the user can remove the device from the port and plug another device that need erase, and start a new session on that port. All of these whiles other sessions are still continuously running with erase operation 2. Since mostly USB devices are slower, grouping USB devices and not mix them with SATA drives will get a better results 3. Batch mode: A user can select and run a certain ports and devices as one session. For example can select all 10 channels as one session Session and Port status run screen: Each session/port has its own independent update port screen, where user can view in real-time the updated status of the operation

3 Log files: NITS compliance. Log files can be exported to USB storage devices Quick Format hard disk drives: 1. Partition Table Type: MBR, GPT, MAC 2. File System Type: NTFS, ex-fat, FAT32, HFS+(Mac), EXT4(Linux) * With hardware options Hardware specifications: CPU: i5-4 th Generation Quad Core OS: Ubuntu RAM: 8GB internal memory with optional upgrade to 16GB Storage: 128GB msata Interface: PCI Express 2.0 SAS/SATA controller supporting 6Gb/s SAS/SATA interface speeds with maximum data rate of 37GB/min Ports in the Front Panel: Four SAS/SATA power and data combo ports. The supplied 29 pin SAS cables include a locking mechanism Two USB3.0 ports Two USB2.0 ports Ports in the Back Panel: DP port for external display 3.5mm speaker, ear phones and microphone connectors Four USB3.0 ports e-sata 6Gbit/s port for external storage (hot plugged) Power characteristics: Supplied universal auto switching 150W UL/CE/PSE approved external power adapter Input voltage: V/50-60Hz Power consumption excluding external drives: 84W Operating environment: 5 C - 55 C (40 F-130 F), relative humidity: 20-60% non-condensing Mechanical characteristics: Overall Dimensions: 10.6 x 3.8 x 7.7 inch (270 x 98 x 194 mm) Net Weight: 6.00 lbs Included items: One SATA to 40-pin IDE adapter.

4 One Mini-SATA adapter. One 2.5 IDE 44-pin adapter. One Micro SATA adapter One Soft carry case Four SAS/SATA combo cables with locking mechanism Option items: Unit s Metal Stand Hard Case USB3.0 to e-sata adapter Mini-PCIE to SSD Express Card Adapters (for devices not supported by SATA protocol) USB3.0 to M.2(NGFF) Adapter USB3.0 to SATA 4 Channel kit (Includes 4 USB3.0 to SATA drive caddies and 1 PS to power 4 SATA hard disk drives) The main unit also has 2 hardware options for user to choose from*: o Express Card port o Expansion port *Only one option can be chosen, at time of main unit s purchasing. Express Card Port and Express card reader is very economic and useful solution to be used with many express card adapters: 1394A/B, Mini-PCIE, Sonnet 4 SAS ports adapter, and more. (Installed and enabled at the time of the main unit s purchasing) Expansion Port: It is enables the connection of the main unit to an Expansion Box that can supported additional devices, like SCSI and more. The Expansion Box comes with 2PCIE + 2PCI slots and with one Express card reader pre installed inside the expansion box (This option can be purchased only at time of the main unit s purchase and were expansion port is pre-installed and enabled) Option: Expansion Port on the main unit SCSI Support Kit: This kit is include all the parts that needed to supports erase from 2 SCSI hard disk drives with the use of the Expansion Box (It is also includes the power cables to power the SCSI hard disk drives from the main unit)

5 Dual Port 1394A/B Express Card adapter works also with the Expansion Box option. (That option also can support multiple daisy chained 1394 devices) Option: Expansion Box with Express Card Reader pre-installed Soft Carrying Bag Optional USB3.0 to SATA 4 Channel Kit

6 MediaClone, Inc Canby Ave, Unit 111 Reseda, CA Office: Fax: