SuperWiper TM Mini - A SECURE ERASER Unit 3 x SATA and 4 x USB3.0-7 Touchscreen Color LCD Display Linux Base

Transcription

1 SuperWiper TM Mini - A SECURE ERASER Unit 3 x SATA and 4 x USB3.0-7 Touchscreen Color LCD Display Linux Base (SWM-0001) The SuperWiper 7 Mini is a very compact field unit with high speed data erase capabilities, featuring three SATA interface ports and four USB3.0 ports, 1Gigabit Ethernet port, and 7 touchscreen color LCD display. The application supports SECURE ERASE mode of operation that is the most recommended for erase SSD drives. Also Support DoD erases protocol. It use a multi sessions simultaneous erase operations where each port act as a separate independent operation. No down time and it perfect tool as a hand carry erase device. Features: Dedicated Secure Unit: the unit is dedicated to preform erases/format data HDD and any other storage devices. (HDD, SSD, USB storage, Multi-Media-Cards) Mobile, very small, and lightweight 7 (1280x800) resistive touch screen color LCD display Erase up to 7 Storage Devices in parallel Very fast erase operation: validated with SSD ADATA SP900 erase speed at 28GB/in, and with 1TB WD blue at 10GB/min Locked-in and keyed DC-in connector to avoid accidentally disconnecting the unit s power Lock-in and keyed SATA power connector to avoid accidentally disconnecting the power of the HDD OS: Ubuntu GUI: Large icons and easy to navigate

2 Device interface: SATA and e-sata enclosures, IDE, USB2.0, USB3.0 (IDE support via SATA to IDE adapter kit) Supports hot plug SATA hard disk drives Device Form factor: o 3.5 inch o 2.5 inch o ZIF o 1.8 o Micro-SATA o Mini - SATA o MMC Support Erase hard disk drives protocols: DoD M, Security Erase (Supported by SATA hard disk drives that MFG after the year 2000), User defines their own erase parameters. Security Erase and DoD operation are NIST compliance HPA/DCO automatic supports: Open HPA and DCO areas on the drive and erase it s content Bad Sectors handling: User have the choice to set skip bad sectors or abort operation Erases memory cards (MMC): With the use of USB flash card reader. (Use adapters that supports pass-through commands in order for the application to display the serial number of the storage devices) Erase Cellphone if they are supported mass storage protocols Most efficient operation with 2 suggested operation methods: 1. Continues mode: A user can run continues erase operations with multi-session operation. (The number of sessions limited to the number of available CPU cores, which is 4 for this unit). Each port, whether SATA or USB, can be used as an independent session for erase operation. A user plugs a device into a selected port and run a session with erase operation on the selected port. The user can abort the operation in the middle of the run, independent of other running sessions. When an erase session on the selected port is completed successfully, the user can remove the device from the port and plug another device that need erase, and start a new session on that port. All of these whiles other sessions are still continuously running with erase operation 2. Since mostly USB devices are slower, grouping USB devices and not mix them with SATA drives will get a better results 3. Batch mode: A user can select and run a certain ports and devices as one session. For example can select all 7 channels as one session Session and Port status run screen: Each session/port has its own independent update port screen, where user can view in real-time the updated status of the operation Log files: Can be save and export to USB stick. (NIST compliance) Quick Format hard disk drives: 1. Partition Table Type: MBR, GPT, MAC

3 2. File System Type: NTFS, ex-fat, FAT32, HFS+(Mac), EXT4(Linux) Hardware Specifications: CPU: Mobil Quad core CPU RAM: 4GB internal memory Storage: 64GB msata Front and Side Panel Ports: Three destination SATA power and data ports with locking and keyed mechanism on the power. The supplied cables include a locking mechanism Two destination USB3.0 ports (Unit side panel) Back panel ports: VGA port for external display Two destination USB 3.0 ports Power Characteristics: Supplied universal auto switching 96W UL/CE/PSE approved external power adapter Input voltage: V/50-60Hz Power consumption excluding external drives: 35W Operating Environment: 5 C - 55 C (40 F-130 F), relative humidity: 20-60% non-condensing Mechanical Characteristics: Overall Dimensions: 7.5 x 6.0 x 2.5 inch. (190 x 152 x 63 mm) Net Weight: 2.50 lbs Included Items: One SATA to 40-pin IDE and 2.5 adapter kit One soft carry case Three SATA data and power combo cables with locking mechanism Optional Items: USB3.0 to e-sata adapter USB3.0 to SATA 4 Channel kit (Includes 4 USB3.0 to SATA drive caddies and 1 PS to power 4 SATA hard disk drives) External Battery Option- Lithium Polymer 10AH erases 3 1TB hard disk drives in 2 hours

4 Many more input devices, adapters, and storage solutions Optional USB3.0 to SATA 4 Channel Kit: Optional External Battery:

5

6 MediaClone, Inc Canby Ave, Unit 111 Reseda, CA Office: Fax: