easygen-series easygen-series Overview Gen-Set Controls for Your Power Generation Systems

Transcription

1 easygen-series Overview easygen-series Gen-Set Controls for Your Power Generation Systems

2 Headline1 Headline2 The easygen-series covers all current applications. AMF and Stand-by Applications easygen-series Gen-Set Control and Optimization Solutions Peak Shaving Applications The easygen-series is a high-quality product line that covers all gen-set control applications and optimization solutions. From simple standard solutions up to complex major projects every application has different requirements to the control system. For every requirement the easygen- Series offers the appropriate unit with regard to function as well as price. The easygen-series with its high functional density per unit provides perfect integration and therefore maximum on-site flexibility. The units cover an extensive field of applications without the need for any additional equipment. Cogeneration Applications The entire easygen-series is characterized by an outstanding price-performance ratio. With high-quality voltage and current metering (with an accuracy of <1 percent) and the extensive protection functionalities the easygen-series follows Woodward s proven control solutions regarding quality and reliability. Marine Applications

3 easygen-3000 ONE UNIT INFINITE OPPORTUNITIES The easygen-3000 is a versatile gen-set control that adapts individually even to sophisticated applications and therefore offers a wide range of application opportunities. There are numerous inputs and outputs, freely selectable breaker combinations as well as extensive communication options you can flexibly adjust and logically combine all of these. In this way the easygen-3000 offers you infinite opportunities to match them perfectly to your requirements. The easygen-3000 can be used for a wide range of applications stand-by, AMF, peak shaving, cogeneration, import-export or distributed generation. Advanced network interface capability ensures best control performance from the engine control level up to the system guidance level. With the easygen-3000 you are capable of working with all common industrial interfaces. The multiple communication protocols permit the easygen-3000 to communicate with a vast majority of engine control units (ECU), external terminals, PLCs and modems. By using Woodward s LogicsManager software you are able to change the operation sequences and modify them to meet your specific needs. Therefore the LogicsManager provides a range of measuring values and internal states, which can be combined logically with Boolean operators and programmable timers. Feature overview Loadsharing with CAN bus Breaker control: Synchronization, open-close control, only-open control, breaker monitoring Load transfer features: Open/closed transition, interchange, soft loading/ unloading, mains parallel 3 freely configurable PID controllers Process-dependent start-stop logic by freely configurable inputs Mains monitoring features Complete engine & generator protection Multi-lingual capability: 10 languages Certifications and registrations: CE, UL/cUL & LR Marine

4 easygen-2000 THE NEW ENERGY EFFICIENCY The easygen-2000 is a gen-set control for paralleling and loadsharing applications. The unit offers all essential protection, control and monitoring features while remaining compact and easy to handle. A special feature of the easygen-2000 is the integrated load management system. It enables you to run applications at the ideal operating state providing maximum energy efficiency or operation with high system reserve according to customer requirements. Advanced network interface capability ensures best control performance from the engine control level up to the system guidance level. With the easygen-2000 you are capable of working with all common industrial interfaces. The multiple communication protocols permit the easygen-2000 to communicate with a vast majority of engine control units (ECU), external terminals, PLCs and modems. The easygen-2000: The genset control for paralleling and loadsharing applications. Feature overview Loadsharing with CAN bus Breaker control: Synchronization, open-close control, only-open control, breaker monitoring Process dependent start-stop logic Mains monitoring features Multi-lingual capability: 10 languages Load transfer features: Open/closed transition, interchange, soft loading/ unloading, mains parallel Complete engine & generator protection Asynchronous (inductive) and synchronous generator support Certifications and registrations: CE, UL/cUL & LR Marine (pending)

5 easygen-1000 FOR SINGLE UNIT APPLICATIONS The streamlined features of the easygen-1000 turn this gen-set control into the ideal solution for your single unit application. With the flexible breaker control logic you can easily configure the easygen-1000 for one of four operating modes from a simple measuring transducer and engine control up to a full two-breaker, open-transition operation device. The simple automatic start-stop logic and load transfer capabilities round out the features of the easygen-1000 to cover all stand-by and emergency applications. The easygen-1000 offers a variety of CAN interfaces and protocols: J1939 for ECU communications CANopen for external terminals (e.g. the Woodward IKD-1 extension card with up to 16 additional external I/O s) Woodward CAN (CAL) protocol for configuration via PC and for the Woodward GW 4 gateway interface converter to communicate with PLCs Serial interfaces for configuration and interfacing with an external modem Feature overview Breaker configuration: GCB and MCB Breaker control: Open-close control, only-open control, breaker monitoring Load transfer by open transition Start-stop logic for diesel & gas engines LogicsManager to adapt programmable relays to your requirements Complete generator protection with 3-Phase-TrueRMS-AC-Sensing Multi-lingual capability: 10 languages Certifications and registrations: CE, UL/cUL, GL & LR Marine The easygen-1000: The ideal solution for all stand-by and emergency applications. REMOTE AUXILIARY RP-3000 Remote panel with the same feel and features as the easygen-3200 display, with CAN communication for the visualization and control of the easygen and easygen-3200 models. easylite-100 Remote display for the status of an enginegenerator control system that utilizes the CAN bus interface. It is managed directly by the supervisory control unit and provides 14 individually configurable LED status displays and four pre-assigned displays for engine alarms.

6 easygen-300 FOR STANDARD SOLUTIONS The easygen-300 is a cost effective engine-generator control unit for auto start and transfer switch operation. It provides all essential functionality to run a single diesel-genset application where synchronization and power sensing is not required. The easygen-300 : The standard for auto start and transfer switch operation. The easygen-300 offers different serial interfaces for configuration and interfacing with an external modem. The optional CAN bus operation pro- vides the ability to indicate J1939 messages from ECUs of selected manufacturers. Feature Overview Single-breaker or two-breaker control Breaker configuration: GCB and MCB Breaker control: Open-close control, only-open control, breaker monitoring Load transfer by open transition Start-stop logic for diesel engines Complete generator protection with 3-Phase-TrueRMS-AC-Sensing Customized display by using paper strips Configuration via front panel and PC Multi purpose LED display to show measured values and alarm messages Certifications and registrations: CE & UL/cUL

7 easygen-3000 easygen-2000 easygen-1000 easygen-300 Operation modes Island mode Island parallel mode - - Mains parallel mode - - Application fields AMF Stand-by Base load control - - Peak shaving - - Marine application - - Cogeneration Load transfer options Open transition - Soft load / interchange - - Closed transition - - Busbar Measurement Protection Mains - Generator Engine Languages Event recorder (Amount of Events) Hardware RS-232 * * * RS CAN 2 ports 2 ports 1 ports 1 ports Protocols J1939 ECU communication CANopen - Modbus (RTU Slave) * - I/O set Standard discrete inputs / outputs 12 / / 11 8 / 11 5 / 6 External discrete inputs / outputs 32 / / / 16 - / - Standard analog inputs / outputs 3 / 2 4 / 4 2 / - - / - External analog inputs / outputs 16 / 4 - / - - / - - / - External extensions RP-3000 remote annunciator easylite-100 remote annunciator IKD-1 I/O extension card Up to 4 Up to 2 Up to 2 - Phoenix extension card - * external DPC cabel required For more details please refer to the relevant product documentation. 1

8 Enabling Electrical Power Systems Integration HEADLINE 1 Headline 2 Woodward GmbH Handwerkstrasse Stuttgart (Germany) Phone +49 (0) Fax +49 (0) stgt-info@woodward.com