Combination Display Lights

Transcription

1 TCL0/TCT0 Super Bright LED unit improves visibility and safety Four types of illumination faces to choose from. Compact combination display lights. Basic Size: Size S Super bright LED unit The insulated jumper reduces wiring. The integrated terminal cover and the jumper prevent the loss of screws. Insulated jumpers eliminates the need to wear electrical protective gloves. Legends can be engraved on the attached marking plate. (Type S only). Illumination Panel Type Type S (0 Type (0 Type V (0 Type L (0 * 0Wmm)(Basic size) * 0Wmm) * 0Wmm) * 0Wmm) Combined construction is available. Type S Type Type V Type L The ngersafe terminals reduce wiring time, enhance safety, and improves structure, operability and safety The integrated terminal cover and, insulated jumpers prevent electic shocks. Application Example of Jumpers Type S Window Spot Illumination Kit Plate Frame(Aluminium Alloy) Plate (Color Plate) Available up to 0 windows 0 rows * columns(types) Marking Films (Type S Only) Super Bright LED LED Lamp T

2 TCL0/TCT0 Con guration LEDUnit Illumination Face Types LED Lamp IlluminationFace Structure Type S Type Type V Type L Illumination Face Structure lens lensframe (color plate) Color Plate lens lensframe (color plate) Color Plate Re ective Mirror Re ective Mirror LED Illumination Clear Lens Basic Color Plate Lens Clear (Color) Plates () Color Plate DisplayColor OFF Speci ed Color Markings can be engraved on white plate or color plate. Engrave markings on the at surface of the plate next to the lens. ON Speci ed Color Speci ed Color LEDLamp LEDUnit Illumination Color:Red, Green, Orange,, Blue (TCL0) Frame Cover Black LED(Basic) (TCT0) Metal Mounting Clip LED Lamp One Color Full One Color Full One Color Full One Color Full V, V AC/DC 0V, 0V AC V, V AC/DC 0V, 0V AC T

3 TCL0/TCT0 Model TCL0 0 S R(0) W(5) G() ` ` 5. LED Type Vertical. Basic Size S Type Windows orizontal. Basic Size S Type Windows. Operating Voltage 5. LED Combination Type Type TCL 0 TCT S V L M Description LED Lamp (Basic) Max. 0 Basic Size S Type Windows per Column Max. Basic Size S Type Windows per Row 0VAC 0V AC V V 0*0W 0*0W 0*0W 0*0W S,,V,L Basic Square Type orizontal Rectangular Type Vertical Rectangular Type Large Square Type Combination Type.Plate Color.LED Color Code R G Y W BL Illumination Panel Face Size Type (orizontal Rectangular Type) blank Basic LED Lamp type is not available in Yellow. C O V Type (Vertical Rectangular Type) Description Plate Color Plate (red, green, yellow, orange, white, blue) Red Green Yellow Orange Blue L Type (Large Square Type) LED.Color TCL.LED Type.Voltage 0 R Code 0 0 R G Y O W BL Lamp Appearance TCL L 0V AC 0V AC V AC/DC V AC/DC Red Green Yellow Orange Blue Description LED Lamp (Basic) TypeSequivalent: windows ROW(), COLUMN () LED Speci cations LED Type Rated Voltage Rated Current LED Lamp (Basic) Lamp Speci cations Illumination Insulation Resistance Breakdown Voltage Ambient Temperature Ambient umidity LED Lamp (Basic) TypeSequivalent: windows ROW(), COLUMN () V AC/DC V AC/DC 0V AC 0V AC V AC/DC V AC/DC 0V AC 0V AC 500V AC 00MΩ -0~+85 C -0~+0 C 5~85%R Ø8 TypeSequivalent: windows ROW(), COLUMN () 0mA 0mA 0mA 5mA 9~mA 8~mA ~5mA ~5mA LED Lamp (Basic) 000V AC. 0 T

4 TCL0/TCT0 Ordering Information Use the speci c order sheet. (see page T9) Counting of Windows Count the number of windows in the equivalent of Type S basic size (0mm x 0mm) Conversion Rate Type Type V orizontal Rectangular Type TypeSequivalent:windows ROW(), COLUMN () Vertical Rectangular Type TypeSequivalent:windows ROW(), COLUMN () Type L Large Square Type TypeSequivalent:windows ROW(), COLUMN () Examples Example TCL/TCT series Type S, 0 windows TCL 0 05 S LED illuminated units R 5 G 5 Y 5 S 5 5 Color screen: Type S, 0 windows R 5 G 5 Y 5 S 5 0 { } LED illuminated units inonecolor R 0 { } Color screen: Type S, 0 windows R (0) = 0 5 When more than one color is required for LED. (Specify each color code on the speci c order sheet.) ColorCode 5 R R R R R G G G G G Y Y Y Y Y O O O O O Example TCL0 Example TCL/TCT series Type, 9 windows 0 0 R G Y R 9 5 LED illuminated units { } Color screen: Type, 9 windows R G Y 9 LED illuminated units inonecolor Color screen: Type, 9 windows { R (9) = 9 } When more than one color is required for LED. (Specify each color code on the speci c order sheet.) ColorCode 5 R O O R Y Y R G G TCL/TCTseries Type M, windows (S+V++L) TCL 0 0 M 5 (Specify each color code on the speci c order sheet.) ColorCode 5 G W Y G G Y Example TC series (Type S, windows) When ordering a combination of units with different operating voltages, specify Type No. as follows. V AC/DC 8windows 0V AC windows 5 TCL 0 0 S(8) + S() W() Specify the position of the units and each voltage on the speci caiton sheet. T

5 TCL0/TCT0 Exterior Dimension.Window Dimension Type S Dimensions & No. of Windows (Type, V, L can be converted into Type S) Dimension Window Size b B D (5) (5) (95) (5) (55) (85) (5) (5) (5) (05) (5) (5) (95) (5) (55) (85) (55) (55) (55) (05) a A C (5) (5) (95) (5) (55) (85) Exterior Dimension Diagram Front View A: No of B: No of TypeS Type Type V TypeL Column B Row A T 5

6 TCL0/TCT0 Instructions. The number of windows equals rows multiplied by columns. For example, for 5 rows by columns, the number of windows is 5, external dimensions are mm high by mm wide, and panel cutout is 55mm high by 5mm wide.. External dimensions are represented by A for rows and B for columns.. Panel cut-out dimensions are shown in ( ), for height (C) and width (D). Panel cut-out tolerance is +.0 to 0 mm (for one window: +0. to 0.mm). Panel Cut-Out Determine the panel thickness in consideration of the weight of display lights and wires (ref page T5). Row C Column D Mounting ole. Total number of windows, dimensions, panel cut-out, see below description. Example Row A Column B V V L The combination example at left consists of rows by columns. Theabovetableshows:No.ofwindows:x- 8 Dimensions:0mm 9mm Accessories Jumper Description, Appearance 5 Type Type S equivalent: windows eight: row Width: columns Type V Type S equivalent: windows eight: rows Width: column Type L Type S equivalent: windows eight: rows Width: columns Dimensions (mm) Package Size Y-Shaped Jumper (connect windows) Rated Input Current: A Jump er TCL- Box (0 pieces) Mounting Fixture Description, Appearance Dimensions (mm) Package Size Metal Installation Accessory (Maintenance ) TCL-F From the back of Panel to Mount the metal part of the body of TC switch Box (0 pieces) Example of Using Jumpers Jumpers

7 TCL0/TCT0 Window Installation and Removal Installation When installation the panel, place the latch on the re ective mirror on the same side as the rectangular recess, then push the panel window down. recess retaining latch Removal To remove the display window, insert the tip of a at screwdriver into the slot on the bottom of the lens frame, and press down lightly on the screwdriver. Do not put excessive force to remove one latch while pressing the other latch on the opposite side. Replacing Lens, Plate, and Lens Frame Removal The lens cover has retaining projections. To remove the lens, white plate, and color plate from the lens frame, push open the lens frame. The lens can also be removed by inserting a screwdriver into one of the sides with recesses. Since the lens has an orientation due to projections, be sure to insert the screwdriver in the directions as shown. retaining latch recess retaining latch Retaining Projections Location Series Type Same Side as Recess recess Type S TCL Series retaining projection Installation Instructions Install the color screen and marking plate into the lens frame. To install the lens, insert its retaining projection into the recesses inside the lens frame, and press the lens on the other side into slide Lens Frame Plate (Color Plate) Lens Retaining Projections Lens Replacing the LED unit Ensure that power to the display lights has been turned off before removing the LED unit. Removal Pinch the LED tip and rotate left till the LED comes off the latch When removing the LED unit from the housing, pull it straight out without pressing on the LED unit terminals. Installation To install the LED unit, place the metal pins on the LED unit to t into the receptacles in the housing, and insert the LED unit. T

8 TCL0/TCT0 Installation on Panel Insert the units into a panel cut-out from the front, and install the mounting clips supplied with the units from the back as shown below. Tighten the screw to prevent loosening. The number of mounting screws varies with the number of windows. Tighten the screws to a torque of 0.9 N.m to 0.9 N.m. Example of Mounting Clip Positions No. of Mounting Clips s in ( ) show the number of mounting clips required for transformer, resistor, icker, and DC-DC converter. ~ ~ 8 9 ~ 5 ~ ~ ~ () (8) 8 0 ~ () (8) 8(0) 0()() ~ 0 (8) 8(0) 0() Safety Precautions Turn off the power to the LED units before installation, removal, wiring, maintenance, or inspection. Before removing the LED units, make sure that power is turned off. Failure to turn off the power may cause an electrical shock, create re hazards, or damage of LED units. Do not use the LED units without the lens, otherwise ingress of foreign objects may cause short circuit, and LED units may be damaged resulting in the deterioration of the LED brightness or no illumination. When lighting the LED units continuously, observe the conditions described below. If the limits are exceeded, the LED units may heat up and create re hazards or damage the LED units Operating Instructions Notes for Continuous Lighting Up to 0 LED units (Type S equivalent) can be lit continuously. When more units are mounted, consider the following restrictions. LED illuminated V AC/DC(, V AC/DC) - Do not light more than 0% of the LED unit continuously, and light the units in a checker pattern. - When more than 0% of the units are lit continuously, limit the lighting duration to 0 minutes. Before lighting the units again, ensure that all units have cooled down. - For dual color LED units, do not light both Red and Green on at the same time. - When continuously lighting the LEDs, limit the percentage lit to within 0%. (Use ashing or checker pattern). Notes for Panel Mounting When mounting the LED units on a panel, determine the panel thickness taking the weights of the S type, type, V type and L type units and wires into consideration. For wiring, use wires of a proper size to meet the voltage and current requirements and tighten the terminal screws to e tightening torque. Loose terminals screws may cause excessive heating, resulting in re hazards. Do not install or operate the LED units where the LED units are subjected to direct sunlight. Excessive heating may create re hazards or damage the LED units. When replacing LED units or LED lamps, use TEND products. Tightening Torque for Terminal Screws For wiring, use wires of a proper size to meet the voltage and current requirements and tighten the terminal screws to the tightening torque shown below. TerminalScrew M Tightening Torque 0..0 N.m M.5.0. N.m M..0 N.m To satisfy its original features, please note the following points on storage and handling. Especially avoid long exposure under direct sunlight. Storage and andling Do not use in an environment with rapid changes in temperature or frost. Do not use chemicals such as alcohol that degrade the property of acrylic. Operating Instructions The blue illumination color may change depending on the decreasing brightness of LED, along with period of use. Do not use outdoors. T 8

9 TCL0/TCT0 Speci cation Sheet TC 0 Note W R G Y A S TW TR TG TY TA TS SW SR SG SY SA SS PW Qua ntity Expected Ship Date Order No Note This Side Up Model : TCL F W 0 R 5 G 5 Y 5 A 0 S 5 TW TR TG TY TA TS SW SR 0 SG 0 SY 5 SA 5 SS 0 PW ColorCode TCL0 TCT0LED Lamp (basic) C TCL0 A A B B Rated Voltage 9 0V AC 0V AC V AC/DC V AC/DC Window Type S V L M 0*0W 0*0W 0*0W 0*0W S,,V,L Basic Square orizontal Rectangle Vertical Rectangle Large Square Combination T 9