SENSYLINK Microelectronics Co., LTD. (CT1820S) Single-Wire Digital Temperature Sensor
|
|
- Ezra Hubbard
- 5 years ago
- Views:
Transcription
1 SENSYLINK Microelectronics (CT1820S) Single-Wire Digital Temperature Sensor CT1820S is a Digital Temperature Sensor with±0.5 C Accuracy over -10 C to 80 C. Single-Wire Digital interface is Compatible with 1-wire Interface. It is ideally used in Industry System and General Temperature Monitor etc. 1
2 Description CT1820S is a digital temperature sensor with ± 0.5 o C(Max.) accuracy over -10 o C to 80 o C. Temperature data can be read out directly via Single- Wire interface (compatible with 1-wire bus in protocol) by MCU. It includes a high precision band-gap circuit, a 9-bit analog to digital converter that can offer 0.5 o C resolution, a calibration unit with non-volatile memory, 8-bit CRC generator and a digital interface block. Each chip has a unique 64-bit ROM ID, which allows multiple devices to connect the same Single- Wire bus. MCU can distinguish and access each device individually by different ROM ID. It has programmable temperature Alarm function for upper and lower trigger temperature. Features Operation Voltage: 1.8V to 5.5V Operating Current: 30uA during Temperature conversion; Average Consumption Current: 0.2uA (Typ.) with reading once temperature per second Standby Current: 50nA (Typ.), 150nA (Max.) Temperature Conversion time: 4ms at 9-bit Temperature Accuracy without calibration: ±0.5 o C(Max.) from -10 o C to 80 o C 9 bit ADC for 0.5 o C resolution Compatible with 1-wire interface Temperature Range: -50 o C to 125 o C Package: TO-92 Applications Industry System General Temperature Monitor PIN Configurations (Top View) VCC 2 DIO 1 GND TO-92 (package code Z) Typical Application VCC MCU GPIO k VCC DIO GND CT1820S Figure 1. Typical Application of CT1820S 2
3 Pin Description CT1820S PIN No. PIN Name Description GND 1 Ground pin. DIO 2 VCC 3 Digital interface data input and output pin, Generally it needs a pull-up resistor to VCC in most applications, between 1.0k and 4.7k. Power supply input pin, it should connect a 100nF to 1.0uF ceramic cap at least to ground. Function Block VCC Regulator Amplifer &ADC 64-bit ROMID& 8-bit CRC Digital Logic & Interface DIO T-Sensor VREF Calibration Memory GND Figure 2. CT1820S function block 3
4 Ordering Information CT1820S X X Package Type Z : TO-92 Packing Blank: Bulk Order PN Accuracy Green 1 Package CT1820SZ ±0.5 o C Halogen free TO-92 Marking ID 2 Packing MPQ Operation Temperature 1820S Bulk 1, o C~+125 o C YWWAXX Notes 1. Based on ROHS Y2012 spec, Halogen free covers lead free. So most package types Sensylink offers only states halogen free, instead of lead free. 2. Marking ID includes 2 rows of characters. In general, the 1st row of characters are part number, and the 2nd row of characters are date code plus production information. 1) Generally, date code is represented by 3 numbers. The number stands for year and work week information. e.g. 501stands for the first work week of year 2015;621 stands for the 21st work week of year ) Right after the date code information, the next 2-3 numbers or letters are specified to stands for supplier or production location information. 3. For very small outline package, there s 4 digits to stands for product information and date code, first 2 digits represent product code, and the other 2 digits stands for work week 4
5 Absolute Maximum Ratings (Note 3) Parameter Symbol Value Unit Supply Voltage V CC to GND -0.3 to 5.5 V I/O pin Voltage V IO to GND -0.3 to 5.5 V Operation junction temperature T J -50 to 150 ºC Storage temperature Range T STG -65 to 150 ºC Lead Temperature (Soldering, 10 Seconds) T LEAD 260 ºC ESD MM ESD MM 600 V ESD HBM ESD HBM 6000 V ESD CDM ESD CDM 1000 V Note 3 1. Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at the "Absolute Maximum Ratings" conditions or any other conditions beyond those indicated under "Recommended Operating Conditions" is not recommended. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. 2. Using 2oz dual layer (Top, Bottom) FR4 PCB with 4x4 mm 2 cooper as thermal PAD Recommended Operating Conditions Parameter Symbol Value Unit Supply Voltage V CC 1.8 ~ 5.5 V Ambient Operation Temperature Range T A -50 ~ +125 C 5
6 Package Outline Dimensions (TO-92) TO-92 Unit (mm) Symbol Dimensions in Millimeters Dimensions in Inches Min. Max. Min. Max. A A b c D D E e e (TYP) 2.540(TYP) 0.050(TYP) 0.100(TYP) L
7 SENSYLINK Microelectronics Co.,Ltd IMPORTANT NOTICE SENSYLINK Microelectronics Co., Ltd reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein or to discontinue any product or service. Customers should obtain the latest relevant information before placing orders and should verify the latest and complete information. SENSYLINK Microelectronics does not assume any responsibility for use of any product, nor does SENSYLINK Microelectronics any liability arising out of the application or use of this document or any product or circuit described herein. SENSYLINK Microelectronics assumes no liability for applications assistance or the design of Customers products. Customers are responsible for their products and applications using SENSYLINK Microelectronics components. SENSYLINK Microelectronics does not convey any license under its patent or trademark rights nor the other rights. SENSYLINK Microelectronics Co., Ltd
SENSYLINK Microelectronics Co., LTD. (CT1701) Single-Wire Digital Temperature Sensor
SENSYLINK Microelectronics () Single-Wire Digital Temperature Sensor is a Low Cost Digital Temperature Sensor with±0.1 C Accuracy over 33 C to 43 C with Single-wire Interface. It is ideally used in General
More informationSENSYLINK Microelectronics Co., LTD. (CT1820HT) Single-Wire Digital Temperature Sensor
SENSYLINK Microelectronics (CT1820HT) Single-Wire Digital Temperature Sensor CT1820HT is a Digital Temperature Sensor with±0.5 C Accuracy Compatible with 1-wire Interface. It is ideally used in HVAC, Thermal
More informationUSB Charging Controller
USB Charging Controller Features D+/D DCP Mode per USB Battery Charging Specification 1.2 D+/D Short Mode per Telecommunication Industry Standard YD/T1591 2009 (Chinese) Supports non BC1.2 Charging Modes
More informationFigure 1 Typical Application Circuit
4-CH CAPACITIVE TOUCH SENSOR WITH AUTO CALIBRATION August 2015 GENERAL DESCRIPTION The IS31SE5104 is a low power, fully integrated 4-channel solution for capacitive touch button applications. The chip
More informationORDERING INFORMATION # of Ports Pressure Type Device Name
Freescale Semiconductor Data Sheet: Technical Data High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated and
More informationZS5889. USB Charging Controller
Features D+/D- DCP Mode per USB Battery Charging Specification 1.2 D+/D- Short Mode per Telecommunication Industry Standard YD/T1591-2009 (Chinese) Supports non-bc1.2 Charging Modes by Automatic Selection
More informationFreescale Semiconductor Data Sheet: Technical Data
Freescale Semiconductor Data Sheet: Technical Data High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated and
More informationUSB Charging Controller. Features. General Description. Applications. Order Information
USB Charging Controller Features D+/D DCP Mode per USB Battery Charging Specification 1.2 D+/D Short Mode per Telecommunication Industry Standard YD/T1591 2009 (Chinese) Supports non BC1.2 Charging Modes
More informationLow Voltage, 10-Bit Digital Temperature Sensor in 8-Lead MSOP AD7314
a FEATURES 10-Bit Temperature-to-Digital Converter 35 C to +85 C Operating Temperature Range 2 C Accuracy SPI and DSP Compatible Serial Interface Shutdown Mode Space-Saving MSOP Package APPLICATIONS Hard
More information± 2g Tri-axis Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2g (19.6 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationName Operation Temperature Package Package Mark
USB Charging Controller Features D+/D- DCP Mode per USB Battery Charging Specification 1.2 D+/D- Short Mode per Telecommunication Industry Standard YD/T1591-2009 (Chinese) Supports non-bc1.2 Charging Modes
More informationTMR1202. General Description. TMR Bipolar Switch. Features and Benefits. Applications
General Description TMR1202 TMR Bipolar Switch The TMR1202 is a digital bipolar magnetic switch that integrates TMR and CMOS technology in order to provide a magnetically triggered digital switch with
More informationFeatures. Description. Applications. Block Diagram PT7M3808. Fixed Voltage Diagram. Adjustable Voltage Diagram(PT7M3808G01)
Features Description Power-On Reset Generator with Adjustable Delay Time: 1.25ms to 10s. Very Low Quiescent Current: 2.8µA Typical High Threshold Accuracy: 0.5% Typ. Fixed Threshold Voltages for Standard
More informationWS3210C62 WS3210C62 Over-Voltage Protection Load Switch Descriptions CSP-9L (Bottom View) Pin Configuration (Top View)
Over-Voltage Protection Load Switch http://www.sh-willsemi.com Descriptions The features a low R ON internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp is capable
More informationILI2303. ILI2303 Capacitive Touch Sensor Controller. Specification
Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2014/9/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099; Fax.886-3-5600055
More informationUNISONIC TECHNOLOGIES CO.,LTD. UL318 Preliminary LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO.,LTD. UL318 Preliminary LINEAR INTEGRATED CIRCUIT SERIAL-INTERFACED 10-DIGIT LED CONTROLLER IC WITH KEYSCAN DESCRIPTION The UL318 is a compact LED controller and driver that interface
More informationUNISONIC TECHNOLOGIES CO., LTD URCZ1284-XX
UNISONIC TECHNOLOGIES CO., LTD URCZ1284-XX PARALLEL PORT SINGLE TERMINATION NETWORK WITH ±15KV ESD PROTECTION DESCRIPTION The UTC URCZ1284-XX is a high-speed parallel port single termination.here is two
More informationAPX803/D 3-PIN MICROPROCESSOR RESET CIRCUIT. Description. Pin Assignments. Features. Applications APX803. ( Top View ) SOT23. ( Top View ) SOT23R GND
/D Description Pin Assignments The /D is used for microprocessor (µp) supervisory circuits to monitor the power supplies in µp and digital ( Top View ) systems. They provide excellent circuit reliability
More informationMPXHZ6130A, 15 to 130 kpa, Absolute, Integrated Pressure Sensor
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 1.2, 06/2015, 15 to 130 kpa, Absolute, Integrated Pressure Sensor The series sensor integrates on-chip, bipolar op amp circuitry
More informationTSH181 General Purpose Hall Effect Latch
TO-92S Pin Definition: 1. V DD 2. GND 3. Output Description TSH181, Hall-Effect sensor, designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage
More information1.5A Ultra Low Dropout Linear Regulator CL39150
General Description The CL39150 is a low dropout three-terminal regulator with a typical dropout of 375mV at 1.5A output current. The CL39150 provides current limit and thermal shutdown. On-chip thermal
More informationMPXH6300A, 20 to 300 kpa, Absolute, Integrated, Pressure Sensor
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 6.0, 09/2015, 20 to 300 kpa, Absolute, Integrated, Pressure Sensor Freescale's series sensor integrates on-chip, bipolar op amp
More informationAS Channels Capacitive Touch Sensor IC From Santa Clara, United States of America
ASI Competitor Equivalent A Competitor Equivalent B Volts Leading Performance: ESD HBM >8k Volts (Directly Applied to All IC Pins) Operating Temperature up to >+95 0 C Features Overview Analog and Digital
More informationIS31BL3231. FLASH LED DRIVER July 2015
FLASH LED DRIVER July 2015 GENERAL DESCRIPTION The IS31BL3231 is a current-regulated charge pump and ideal for powering high brightness LEDs for camera flash and torch applications. The charge pump can
More informationMP3V5050V, -50 to 0 kpa, Gauge Pressure Sensor
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 3.0, 09/2015, -50 to 0 kpa, Gauge Pressure Sensor The piezoresistive transducer is a state-of-the-art, monolithic, signal conditioned,
More informationFT6x06. Self-Capacitive Touch Panel Controller INTRODUCTION FEATURES
Self-Capacitive Touch Panel Controller INTRODUCTION The FT6x06 Series ICs are single-chip capacitive touch panel controller ICs with a built-in 8 bit enhanced Micro-controller unit (MCU).They adopt the
More information2 Channel Charge Pump Supply for TFT-LCD
.. General Description The is a high perfomance charge pump converter to generate positive and negative voltage supply optimized for small to medium size thin-film transistor(tft) liquid crystal displays
More informationBCT Channel LED Driver (Common-Anode & Common-Cathode) Low Dropout Current Source & Current Sink. General Description. Features.
BCT3220 Low Dropout Current Source & Current Sink General Description The BCT3220 is a high performance white LED driver. The BCT3220 uses an internal resistor to set the bias current for four LEDs, which
More information1A Ultra Low Dropout Linear Regulator
General Description The is a low dropout three-terminal regulator with a typical dropout of 0.28V at 1A output current. The provides current limit and thermal shutdown. On-chip thermal shutdown provides
More informationK T6001. Smart USB Charging Port Controller. General Description. Applications. Features. Ordering Information
K CA Car Chargers Computer Peripherals Wall Adaptors USB Power Plugs Portable Power Banks General Description The K T6001 is a smart USB interface IC specifically designed for dedicated charging port applications.
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD MICROPROCESSOR IC DESCRIPTION The UTC UTC812 is a microprocessor (µp) reset circuit designed to monitor the power supplies in µp and digital systems. The UTC UTC812 has push-pull
More informationChrontel CH7231A USB Type-C Electronically Marked Cable Component
Chrontel Chrontel USB Type-C Electronically Marked Cable Component Features Component for USB Type-C electronically marked cable (USB Type-C Specification 1.2) Support USB power delivery specification
More informationF USB Charger Controller F Release Date: Dec., 2011 Version: V0.11P. Nov., 2011 Data Sheet
USB Charger Controller Release Date: Dec., 2011 Version: V0.11P F75204 Datasheet Revision History Version Date Page Revision History Data Brief 2011/10 - Data Brief 0.10P 2011/ 11 Up Date AC/DC SPECs 0.11P
More informationCW3003CW3004R04. Dual-Channel USB Charging Controller. Features. General Description. Applications. Order Information
CW3003 CW3004 Dual-Channel USB Charging Controller Features D+/D- DCP Mode per USB Battery Charging Specification 1.2 D+/D- Short Mode per Telecommunication Industry Standard YD/T1591-2009 (Chinese) Supports
More informationChrontel CH7251A for USB Type-C Charger
Chrontel for USB Type-C Charger Features Component for USB Type-C Charger(USB Type-C Specification 1.2) On chip 3A switch. On chip over voltage, over current and over temperature detection and protection.
More informationHL2430/2432/2434/2436
Features Digital Unipolar Hall sensor High chopping frequency Supports a wide voltage range - 2.5 to 24V - Operation from unregulated supply Applications Flow meters Valve and solenoid status BLDC motors
More information± 2g Tri-axis Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2g (19.6 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationMAS6240 Piezo Driver with Multi-Mode Charge Pump
MAS624 Piezo Driver with Multi-Mode Charge Pump Both Single Ended and Differential Output Three-Step Volume Adjusting Up to 8Vpp Output from 3V Supply One Wire Audio & Shutdown Control High Efficiency
More informationILI2511. ILI2511 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.4. Date: 2018/7/5
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.4 Date: 2018/7/5 ILI TECHNOLOGY CORP. 8F., No.1, Taiyuan 2 nd St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) Tel.886-3-5600099;
More informationDEI5090 SINGLE-RAIL ARINC 429 LINE DRIVER
Device Engineering Incorporated 385 East Alamo Drive Chandler, AZ 85225 Phone: (480) 303-0822 Fax: (480) 303-0824 E-mail: admin@deiaz.com DEI5090 SINGLE-RAIL ARINC 429 LINE DRIER FEATURES Operates from
More information± 2g Tri-axis Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2g (19.6 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationACE24AC128 Two-wire Serial EEPROM
Description The ACE24AC128 series are 131,072 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 16,384 words of 8 bits (one byte) each.
More informationILI2312. ILI2312 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.03.
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2015/11/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099;
More informationSP6331, SP6333, & SP6335 Quad µpower Supervisory Circuit
SP6331, SP6333, & SP6335 Quad µpower Supervisory Circuit FEATURES Low operating voltage of 1.6V Low operating current of 20µA typical Monitors up to four supplies simultaneously Adjustable inputs monitor
More informationTS2043 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD TS2043 Preliminary CMOS IC TOUCH PANEL CONTROLLER DESCRIPTION The UTC TS2043 is a highly integrated 12-bit SAR analog-to-digital (A/D) converter designed for touch panel
More informationFM24C02A 2-Wire Serial EEPROM
FM24C02A 2-Wire Serial EEPROM Apr. 2010 FM24C02A 2-wrie Serial EEPROM Ver 1.3 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI FUDAN MICROELECTRONICS
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Description. Features. Block Diagram DATASHEET
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) or LVDS input pairs
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationACE24AC16B Two-wire Serial EEPROM
Description The ACE24AC16B is 16,384 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 2,048 words of 8 bits (1 byte) each. The devices
More informationUNISONIC TECHNOLOGIES CO., LTD UH266
UNISONIC TECHNOLOGIES CO., LTD HIGH VOLTAGE HALL EFFECT LATCH DESCRIPTION The UTC is a one-chip composed of Hall sensor and output coil drivers, applied to two-phase brush-less DC motor. The device includes
More informationReset Output. Active high Active low Active high Active low
Low Power Voltage Detector Features High accuracy: 2% (25 C) Low power consumption: 0.6μA @ 3V Vcc Detecting voltage range: 1.8 to 5V in 100mV increments Operating voltage range: 1.2V ~ 5.5V Operating
More informationMP3V5050, 0 to 50 kpa, Differential, and Gauge Pressure Sensor
NXP Semiconductors Document Number: Data Sheet: Technical Data Rev. 1.3, 11/2017, 0 to 50 kpa, Differential, and Gauge Pressure Sensor The series piezoresistive transducer is a state-of-the-art, monolithic
More informationNUP8011MUTAG. Transient Voltage Suppressors
NUP0MU Transient Voltage Suppressors ESD Protection Diodes with Low Clamping Voltage Array This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage
More informationWS3210 WS3210. Over-Voltage Protection Load Switch. Descriptions. Features. Order information. Applications.
Over-Voltage Protection Load Switch http://www.sh-willsemi.com WS3210 Descriptions The WS3210 features a low internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp
More informationACE24AC02A1 Two-wire Serial EEPROM
Description The ACE24AC02A1 is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 256 words of 8 bits (1 byte) each. The devices
More informationACE24AC64 Two-wire Serial EEPROM
Description The ACE24AC64 series are 65,536 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 8192 words of 8 bits (one byte) each. The
More informationFM24C02B/04B/08B/16B 2-Wire Serial EEPROM
FM24C02B/04B/08B/16B 2-Wire Serial EEPROM Sep. 2009 FM24C02B/04B/08B/16B 2-Wire Serial EEPROM Ver 1.7 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION
More informationACE803ND 3-Pin Microprocessor Reset Circuits
Description ACE803ND The ACE803ND is a microprocessor (μp) supervisory circuit used to monitor the power supplies in μp and digital systems. It provides excellent circuit reliability and low cost by eliminating
More informationD8084B. High voltage piecewise linear. Constant current LED control chip. Feature. Description. Application range. Typical applications
High voltage piecewise linear Constant current LED control chip Description D8084B is a high power factor linear constant current LED driver chip, it Integrated high-voltage rectifier diode and JFET high
More informationFigure 1: TSSOP-24 ( Top View ) Figure 2: TQFN 4x4-24 ( Top View )
16-bit I2C-bus and SMBus I/O port with interrupt Features Operation power supply voltage from 2.3V to 5.5V 16-bit I/O pins which can be programmed as Input or Output 5V tolerant I/Os Polarity inversion
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Features
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) input pairs and
More informationTF90LVDS047-6CG. Quad LVDS Line Driver with Flow-Through Pinout. Description. Features. Applications. Function Diagram. Ordering Information
Features Companion driver to Quad Extended Common Mode LVDS Receiver TF0LVDS048 DC to 400 Mbps / 200 MHz low noise, low skew, low power operation t 350 ps (max) channel-to-channel skew t 250 ps (max) pulse
More informationHigh Volume Pressure Sensor for Disposable Applications
Freescale Semiconductor Data Sheet: Technical Data Pressure Rev 9, 10/2012 High Volume Pressure Sensor for Disposable Applications Freescale Semiconductor has developed a low cost, high volume, miniature
More informationup7535 Dual-Input Triple-Output Power Multiplexer in PSOP-8L for USB High Side Switch General Description Ordering Information Applications
Dual-Input Triple-Output Power Multiplexer in PSOP-8L for USB High Side Switch The up7535 is a current limited, dual-input triple-output power multiplexer acting as a high side switch for USB applications
More informationHM9708 HM9708. Battery-Powered Equipment Motherboard USB Power Switch USB Device Power Switch Hot-Plug Power Supplies Battery-Charger Circuits DC+ VIN
200mΩ Power Distribution Switches Features 200mΩ Typ. High-Side MOSFET 0.8A Current Limit (V IN =3.0V) Wide Input Voltage Range: 2V ~ 5.5V Soft Start Thermal Protection Small SOT-23-5 Package Minimizes
More informationInolux Surface Mount High Power Ultraviolet LED IN-3531SCUV
Inolux Surface Mount High Power Ultraviolet LED Official Product Product: Data Sheet No. Tentative Product **************** Sept. 5, 2016 Version of 1.3 Page 1/13 DISCLAIMER... 3 LABEL SPECIFICATIONS...
More informationCW2013. Low-Cost 1s Fuel Gauge IC with Low-SOC Alert. General Description. Features. Applications. Order Information
CW2013 Low-Cost 1s Fuel Gauge IC with Low-SOC Alert Features System Side used Fuel Gauging 3% Maximum Total SOC Measurement Error 14 bit Delta Sigma ADC for Temperature and Cell Voltage Measurement Precision
More informationIndustry Product Group
Cosemitech (Shanghai) Co., Ltd. FEATURES and FUNCTIONAL DIAGRAM PACKAGE Enhanced sensitivity: will operate from only 45 Gauss typical, at 25 C allowing the use of smaller, potentially lower-cost magnets
More informationJC GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLIC PIN ASSIGNMENT. 300mA, Low Consumption, Low Dropout, CMOS LDO
GENERAL DESCRIPTION The series arelowdropout linear regulators and optimized to provide a high performance solution for battery power system to delivery low quiescent current. The device offer a new level
More informationZSPM4121. Under-Voltage Load Switch for Smart Battery Management. Datasheet. Brief Description. Features. Related IDT Smart Power Products
Under-Voltage Load Switch for Smart Battery Management ZSPM4121 Datasheet Brief Description The ZSPM4121 battery management load switch can be used to protect a battery from excessive discharge. It actively
More informationThe BCT4302B is available in 20-pin 3mm x 3mm QFN package. The operating temperature range is from
General Description The is a dual SIM card control chip optimized for GSM/EDGE/GPRS/3G handsets, It provides the power conversion and signal level translation needed for advanced cell phones to interface
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationACE24AC02A3C Two-wire Serial EEPROM
Description The ACE24AC02A3C is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 256 words of 8 bits (1 byte) each. The devices
More informationSGM2032 Low Power, Low Dropout, RF Linear Regulators
GENERAL DESCRIPTION The SGM2032 series low power, low noise, low dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationGreenChip synchronous rectifier controller. The TEA1792TS is fabricated in a Silicon-On-Insulator (SOI) process.
Rev. 3 29 January 2014 Product data sheet 1. General description The is a member of the new generation of Synchronous Rectifier (SR) controller ICs for switched mode power supplies. Its high level of integration
More information± 2g Tri-Axis Accelerometer Specifications
Product Description The is a tri-axis, silicon micromachined accelerometer with a full-scale output range of ±g (19.6m/s ). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationHX4002 HX1001. White LED Backlighting Li-Ion Battery Backup Supplies Local 3V to 5V Conversion Smart Card Readers PCMCIA Local 5V Supplies
HX1001 Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 5V±4% Output VIN Range: 2.7V ~ 5V Output Current: up to 250mA (V IN =4.5V) Low Noise Constant Frequency Operation Shutdown Current:
More informationESD5Z5.0 TRANSIENT VOLTAGE SUPPRESSORS FOR ESD PROTECTION
DESCRIPTION The Series is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time, make these parts ideal
More informationDS WIRE INTERFACE 11 DECOUPLING CAP GND
Rev ; 4/3 Hex Nonvolatile Potentiometer with General Description The contains six 256-position nonvolatile (NV) potentiometers, 64 bytes of NV user EEPROM memory, and four programmable NV I/O pins. The
More informationCosemitech. Automotive Product Group. FEATURES and FUNCTIONAL DIAGRAM
FEATURES and FUNCTIONAL DIAGRAM This is advanced information on a new product now PACKAGE Power consumption of 4 ma at 5 VDC for energy efficiency Single Current Sinking or Current Sourcing Output Linear
More informationNCR402T. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data
16 October 2015 Product data sheet 1. General description LED driver consisting of a resistor-equipped PNP transistor with two diodes on one chip in a small SOT23 plastic package. 2. Features and benefits
More informationMM5Z2V4 - MM5Z75V Zener Diodes
June 2015 MM5Z2V4 - MM5Z75V Zener Diodes Features Wide Zener Voltage Range Selection, 2.4 V to 75 V Flat Lead, Surface Mount Device Under 0.70 mm Height Extremely Small Outline Plastic Package SOD523F
More informationLM75A Digital temperature sensor and thermal watchdog
INTEGRATED CIRCUITS Digital temperature sensor and thermal watchdog Supersedes data of 2004 Oct 05 2006 Jun 27 GENERAL DESCRIPTION The is a temperature-to-digital converter using an on-chip band-gap temperature
More information± 10g Tri-axis Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-10g (98 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
More information5-CHANNEL MOTOR DRIVER FOR DVD PLAYER General Description. Features. Application
General Description The is a five-channel BTL driver IC, in which four channels are voltage-type BTL drivers for tracking and focus actuators, sled and spindle motors, the other one channel is DC motor
More informationAbsolute Pressure Sensor
November 2007 Absolute Pressure Sensor Data Sheet Rev 2.14 Sense & Control Edition 2007-11-23 Published by Infineon Technologies AG 81726 München, Germany 2007 Infineon Technologies AG All Rights Reserved.
More informationE P AP3615. Pin Assignments. Description. Features. Applications 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3615
AGND PGND VIN EN VOUT1 NC VOUT2 D1 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER Description The is a step-up DC-DC converter based on 1x/1.5x charge pump and low dropout current sink, which helps
More informationRN-174. WiSnap M2 Super Module. Features. Description. Applications. ~ page 1 ~ rn-174-ds v1.1 6/1/2011
WiSnap M2 Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (RN-174-C), PCB Trace antenna (RN-174-P), wire antenna (RN- 174-W) and
More informationVBattery 7 VCC V DD IRLED IS31SE5001 SDA SCL INTB SDB. Figure 1 Typical Application Circuit
IR SENSOR FOR TOUCHLESS PROXIMITY July 2013 GENERAL DESCRIPTION The IS31SE5001 is a low-power, reflectance-based infrared light sensor with advanced signal processing and digital output. The sensor can
More informationGRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-ADC board is a 14-pin CMOS device that provides 8-CH, 12-bit of Analog to Digital Converter (ADC) using I 2 C bus. There are no external components
More informationHigh-side Power Distribution Switch NCT3521U
High-side Power Distribution Switch NCT3521U -Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATIONS...2 4. PIN CONFIGURATION AND DESCRIPTION...2 5. TYPICAL APPLICATION CIRCUIT...3
More informationRT9505. Linear Single Cell Li-Ion Battery Charger IC. General Description. Features. Applications. Ordering Information. Pin Configurations
Linear Single Cell Li-Ion Battery Charger IC General Description The RT505 is a fully integrated low cost single-cell Li- Ion battery charger IC ideal for portable applications. The RT505 is capable of
More informationDual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
More information5 V Charge Pump HDMI Tx Companion Chip AD9394
Data Sheet FEATURES 5 V at 55 ma output for an HDMI +5 V requirement For hot plug detect with HDMI Tx 3.3 V at 60 ma output Lithium battery input: 2.5 V to 4.5 V Short-circuit limitation: 00 ma 3 4 array
More informationGENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL APPLICATION DIAGRAM
August 2009 Rev. 2.0.0 GENERAL DESCRIPTION The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two
More informationIndustry Product Group
Cosemitech (Shanghai) Co., Ltd. in development or undergoing evaluation. Details are subject to change without notice and Cosemitech assumes no obligation for future manufacture of this product. Contact
More informationSub-1G + Bluetooth LE Module
Doc. Name : BSG-01-Rev0.1.01.doc Date : 2017-09-19 Revision : 0.1.01 Copyright, 2017 by Engineering Department, Valence Semiconductor Design Limited. All rights reserved. No part of this document may be
More informationSGM mA, Ultra Low Dropout, Low Power, RF Linear Regulators
GENERAL DESCRIPTION The is a low-power, low-noise, low-dropout, CMOS linear voltage regulator that operates from a 2.5V to 5.5V input voltage. It is the perfect choice for low voltage, low power applications.
More informationFEATURES APPLICATIONS C1 C2 C3 C4 C5 C6 C7 C8 R8/C9 R7/C10 R6/C11. Figure 1 Typical Application Circuit
AUDIO MODULATED MATRIX LED DRIVER GENERAL DESCRIPTION FEATURES November 2016 IS31FL3728 is a general purpose 8 8 LED matrix driver which features an audio frequency equalizer (EQ) mode or a general LED
More informationPI4IOE5V bit I 2 C-bus and SMBus low power I/O port with interrupt and reset
Features Operation power supply voltage from 2.3V to 5.5V 2-bit I 2 C-bus GPIO with interrupt and reset 5V tolerant I/Os Active Low interrupt output Active Low reset input Polarity inversion register Low
More information