WS3210C62 WS3210C62 Over-Voltage Protection Load Switch Descriptions CSP-9L (Bottom View) Pin Configuration (Top View)
|
|
- Britton Perry
- 5 years ago
- Views:
Transcription
1 Over-Voltage Protection Load Switch Descriptions The features a low R ON internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp is capable of shunting surge voltage >80V, protecting downstream components and enhancing system robustness. The features Over-Voltage Protection (OVP) that shuts off the internal Switch if input voltage exceeds the Fixed OVP threshold. The off-state Switch can disconnect the input pin to output pin and protect output from the input high voltage stress. Integrated Over-Temperature Protection (OTP) also shuts off the Switch to protect the device. The is available in 1.4mm x 1.4mm CSP-9L package. Standard product is Pb-free and Halogen-free. A B C CSP-9L (Bottom View) OUT OUT GND OUT IN GND IN IN GND Pin Configuration (Top View) Features Absolute Maximum Input Voltage : 30V Surge Protection : >80V Low RON Switch (@VIN=5V) : 45mΩ Fixed OVP Threshold : 6.2V Fast OVP Response : 100ns Thermal Shutdown Protection Robust ESD Protection -Human Body Model (HBM) : 8000V -Machine Model (MM) : 800V Applications Mobile Handsets and Tablets Portable Media Players Peripherals 1 A Marking 3210 = Device code Y W YW = Year code = Week Code Order information Device Package Shipping -9/TR CSP-9L 3000/Reel&Tape Will Semiconductor Ltd /03 - Rev. 1.3
2 Typical Applications V IN IN OUT V OUT C IN 1μF C OUT 4.7μF GND Pin Descriptions Pin Number Symbol Descriptions 1C, 2B, 2C IN Switch Input Pin and Device Power Supply. 1A, 1B, 2A OUT Switch Output Pin to Load. 3A, 3B, 3C GND Device Ground Pin. Block Diagram IN OUT Surge Protection OVP Charge Pump GND Logic Thermal Protection Will Semiconductor Ltd /03 - Rev. 1.3
3 Absolute maximum ratings Parameter Symbol Value Unit V_IN voltage range V IN -0.3~30 V V_OUT voltage range V OUT -0.3~16 V Switch I/O Continuous Current I IN 3 A Switch FET Body Diode Continuous Current I DIODE 1.5 A Body Diode Forward Peak Pulse Current *1 Pulse Width = 10ms I PP 20 A Pulse Width = 20μs 50 A Junction temperature T J 150 Lead temperature(soldering, 10s) T L 260 Storage temperature T STG -55~150 HBM 8000 V ESD Ratings MM 800 V *1 Single Pulse These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Recommend Operating Conditions Parameter Symbol Value Unit VIN supply input voltage range V cc 3.2~28, typical=5 V Operating ambient temperature T A -40~85 Thermal Resistance R θja 95 /W Will Semiconductor Ltd /03 - Rev. 1.3
4 Electrical Characteristics (T A = 25, V IN = 5V, C IN = 1uF, C OUT = 4.7uF, unless otherwise noted.) Parameter Symbol Conditions Min. Typ. Max. Units Basic Operation Quiescent Supply Current I Q V IN = 5V, No Load ua UVLO Threshold Voltage V UVLO V IN Rising V Start-up Delay Time T START_DLY V IN = 0->5V to Output ON 7.5 ms Main Switch ON-Resistance R ON V IN = 5V, I OUT = 1A 45 mω Surge and Over-Voltage Protection Surge Voltage Protection V SURGE 88 V VIN OVP Threshold V OVP V IN Rising V OVP Response Time t OVP V IN = 5->10V 100 ns OVP Hysteresis Voltage V HYS_OVP V IN Falling 0.1 V OVP Recovery Time t R_OVP V IN = 6.5->5V 7.5 ms Output discharge resistance R DCHG V IN = 6.5V, V OUT = 5V 120 Ω Thermal Protection Over-Temperature Protection Threshold Over-Temperature Protection Hysteresis T SD 140 T HYS 20 Will Semiconductor Ltd /03 - Rev. 1.3
5 V OVP (V) Quiescent Current ( A) R ON (m ) R ON (m ) Typical Characteristics (T A =25 C, unless otherwise noted) V IN =5V Load Current (A) ON Resistance vs. Load Current V IN =5V I OUT =0.2A Temperature ( ) ON Resistance vs. Temperature Temperature( ) OVP Threshold vs. Temperature V IN =5V Temperature(C o ) Quiescent Current vs. Temperature Will Semiconductor Ltd /03 - Rev. 1.3
6 Power-On with No Load Power-On with R L =5Ω OVP and Recovery from OVP Power-Off with R L =5Ω Will Semiconductor Ltd /03 - Rev. 1.3
7 PACKAGE OUTLINE DIMENSIONS CSP-9L TOP VIEW BOTTOM VIEW SIDE VIEW Symbol Dimensions in Millimeters Min. Typ. Max. A A A D E D E b e BSC SD BSC SE BSC Will Semiconductor Ltd.
8 W RD TAPE AND REEL INFORMATION Reel Dimensions Reel Dimensions P1 Tape Dimensions Quadrant Assignments For PIN1 Orientation In Tape Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 User Direction of Feed RD Reel Dimension 7inch 13inch W Overall width of the carrier tape 8mm 12mm P1 Pin1 Pitch between successive cavity centers Pin1 Quadrant 2mm 4mm 8mm Q1 Q2 Q3 Q4 Will Semiconductor Ltd.
WS3210 WS3210. Over-Voltage Protection Load Switch. Descriptions. Features. Order information. Applications.
Over-Voltage Protection Load Switch http://www.sh-willsemi.com WS3210 Descriptions The WS3210 features a low internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp
More informationWS4601 WS4601. Descriptions. Features. Applications. Order information. 80mΩ, Current Limited, Power Distribution Switch
80mΩ, Current Limited, Power Distribution Switch www.sh-willsemi.com Descriptions The is high-side switch with ultra-low ON resistance P-MOSFET. Integrated current-limit function can limit inrush current
More informationJC GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLIC PIN ASSIGNMENT. 300mA, Low Consumption, Low Dropout, CMOS LDO
GENERAL DESCRIPTION The series arelowdropout linear regulators and optimized to provide a high performance solution for battery power system to delivery low quiescent current. The device offer a new level
More informationUNISONIC TECHNOLOGIES CO., LTD US2005 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD US2005 Preliminary CMOS IC FIXED CURRENT LIMIT POWER DISTRIBUTION SWITCH DESCRIPTION UTC US2005 is a low voltage cost-effective high-side power switch with current limiting
More informationHigh-side Power Distribution Switch NCT3521U
High-side Power Distribution Switch NCT3521U -Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATIONS...2 4. PIN CONFIGURATION AND DESCRIPTION...2 5. TYPICAL APPLICATION CIRCUIT...3
More informationDIO V Current Limited Load Switch
Rev 1.0 DIO7527 Features Input voltage range: 2.7V to 5.5V 2A Maximum Load Current 70mΩ typical R DS(ON) 70μA quiescent current Under-Voltage Lockout High precision over current trigger point Open-drain
More informationup7535 Dual-Input Triple-Output Power Multiplexer in PSOP-8L for USB High Side Switch General Description Ordering Information Applications
Dual-Input Triple-Output Power Multiplexer in PSOP-8L for USB High Side Switch The up7535 is a current limited, dual-input triple-output power multiplexer acting as a high side switch for USB applications
More informationAP2142/ AP2152. Description. Pin Assignments. Features. Applications. Typical Applications Circuit 0.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH SO-8
0.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH Description Pin Assignments The AP2142 and AP2152 are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap ( Top
More informationSGM2020 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
More informationSGM2031 Low Power, Low Dropout, RF - Linear Regulators
RF - Linear Regulators GENERAL DESCRIPTION The series low-power, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage in an ultra small package. They are the perfect choice
More informationWS3225C WS3225C. USB TYPE-C Port Protection Switch With Short-to-V BUS Overvoltage and IEC ESD Protection. Http//:
WS3225C USB TYPE-C Port Protection Switch With Short-to-V BUS Overvoltage and IEC ESD Protection Http//:www.sh-willsemi.com Descriptions The WS3225C is a single chip USB Type-C port protection solution
More informationDescription AP 21 X 2 XX G Packing 4 : Active Low 5 : Active High S : SOP-8L MP : MSOP-8L-EP
Features Description Dual USB port power switches Over-current and thermal protection 0.8A accurate current limiting Reverse Current Blocking 115mΩ on-resistance Input voltage range: 2.7V 5.5V 0.6ms typical
More informationAIC1520. Ferrite Bead GND. *33µF, 16V Tantalum, or 100µF, 10V Electrolytic Bold line indicate high-current traces. USB High-Side Power Switch
USB High-Side Power Switch FEATURES 120mΩ (5V Input) High-Side MOSFET Switch. 500mA Continuous Load Current. 80µA Typical On-State Supply Current. Current-Limit / Short Circuit Protection. Thermal Limiting
More informationMAX14653/MAX14654/ MAX14655/MAX High-Current Overvoltage Protectors with Adjustable OVLO
EVALUATION KIT AVAILABLE MAX14653/MAX14654/ General Description The MAX14653/MAX14654/ overvoltage protection devices feature a low 38mΩ (typ) R ON internal FET and protect low-voltage systems against
More informationSGM2022 Dual, Low Dropout, 250mA LDO Regulator
GENERAL DESCRIPTION The SGM2022 is a dual, low-power, low-dropout, CMOS linear voltage regulator. It operates from a 2.5V to 5.5V input voltage and delivers up to 250mA at each channel. The SGM2022 is
More informationSGM MHz, Video Driver with Y-C Mixer and Chroma Mute
26MHz, Video Driver with Y-C PRODUCT DESCRIPTION The SGM9140 is a low power, low voltage operation video amplifier with Y/C mixer and driver. SGM9140A is 12.4dB gain driver, and SGM9140B is 6.4dB gain
More informationOver-Voltage Protection Load Switch with Surge Protection
Over-Voltage Protection Load Switch with Surge Protection FEATURES Surge protection IEC 61000-4-5: > 100V Integrated low Rdson nfet switch: typical 28mΩ 4.5A continuous current capability Default Over-Voltage
More informationSGM2032 Low Power, Low Dropout, RF Linear Regulators
GENERAL DESCRIPTION The SGM2032 series low power, low noise, low dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSTMLS05 Applications Description Features Table 1: Device summary I2C base Package Order code address marking
Enhanced five-channel PMOS load switches Datasheet - production data Applications Smart phones Tablets Mobile device accessories Wearable devices Features Five-channel PMOS switches Input/output voltage
More informationAP2161A/ AP2171A. Pin Assignments. Description. Features. Applications 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH
1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH Description Pin Assignments The AP2161A and AP2171A are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap (
More informationBCT mA Buck/Boost Charge Pump LED Driver
BCT3140 GENERAL DESCRIPTION The BCT3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels
More informationAP2145/ AP2155. Description. Pin Assignments. Features. Applications. Typical Applications Circuit SO-8
Green 0.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH Description Pin Assignments The AP2145 and AP2155 are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap
More informationOvervoltage-Protection Controllers with a Low RON Internal FET MAX4970/MAX4971/MAX4972
19-4139; Rev 1; 8/08 Overvoltage-Protection Controllers General Description The family of overvoltage protection devices features a low 40mΩ (typ) R ON internal FET and protect low-voltage systems against
More informationAP2166/ AP2176. Description. Pin Assignments. Features. Applications. Typical Applications Circuit 1A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH SO-8
1A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH Description Pin Assignments The AP2166 and AP2176 are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap ( Top
More informationMAX14606/MAX14607 Overvoltage Protectors with Reverse Bias Blocking
EVALUATION KIT AVAILABLE MAX1466/MAX1467 General Description The MAX1466/MAX1467 overvoltage protection devices feature low 54mI (typ) on-resistance (RON) internal FETs and protect low-voltage systems
More informationSGM2019 Low Power, Low Dropout, RF-Linear Regulators
GENERAL DESCRIPTION The SGM2019 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationAOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications
Low Capacitance 2.5 V TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines from ESD and lightning. This incorporates twelve low capacitance
More informationCEP8120 Rev 1.0, March, 2015
USB Dedicated Charging Port Controller FEATURES Supports USB DCP Shorting D+ Line to D Line per USB Battery Charging Specification, Revision 1.2 (BC1.2) Supports Shorted Mode (Shorting D+ Line to D- Line)
More informationMP6219 5V, 1A 2A Programmable Current Limit Power Distribution Switch
The Future of Analog IC Technology MP6219 5V, 1A 2A Programmable Current Limit Power Distribution Switch DESCRIPTION The MP6219 is a protection device designed to protect circuitry on the output from transients
More informationSGM mA, Low Power, Low Dropout 3 -Terminal, Linear Regulators
3 -Terminal, Linear Regulators GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for
More informationLow cost, 3 Step Dimming Control, Linear AC LED Driver. Features. Applications. Fig. 1 Typical application with 3 Step dimming
Low cost, 3 Step Dimming Control, Linear AC LED Driver General Description The is a non-isolated linear LED driver for general purpose LED lighting applications. It is capable of driving LEDs in multiple
More informationE P AP3615. Pin Assignments. Description. Features. Applications 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3615
AGND PGND VIN EN VOUT1 NC VOUT2 D1 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER Description The is a step-up DC-DC converter based on 1x/1.5x charge pump and low dropout current sink, which helps
More informationMAS6240 Piezo Driver with Multi-Mode Charge Pump
MAS624 Piezo Driver with Multi-Mode Charge Pump Both Single Ended and Differential Output Three-Step Volume Adjusting Up to 8Vpp Output from 3V Supply One Wire Audio & Shutdown Control High Efficiency
More informationMSOP-8EP 0.6ms Typical Rise Time Very Low Shutdown Current: 1µA (Max)
0.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH Description Pin Assignments The is an integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. The
More informationLM3526 Dual Port USB Power Switch and Over-Current Protection
LM3526 Dual Port USB Power Switch and Over-Current Protection General Description The LM3526 provides Universal Serial Bus standard power switch and over-current protection for all host port applications.
More informationAP22815 / AP Pin Assignments. Description. Features. Applications SINGLE CHANNEL POWER DISTRIBUTION SWITCH WITH OUTPUT OVP
SINGLE CHANNEL POWER DISTRIBUTION SWITCH WITH OUTPUT OVP Description Pin Assignments The AP22815/615 is a 3A single-channel current-limited high-side power switch with output OVP optimized for USB and
More informationA8241. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION. Low 60mV Dropout at 20mA 4% LED Current Matching
DESCRIPTION The is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery with its high efficiency,
More informationHigh-Current/Overvoltage Protection Switch IC with Voltage Suppressor
Series High-Current/Overvoltage Protection Switch IC with Voltage Suppressor OUTLINE The R5560Z is a CMOS-based high-current and overvoltage protection switch IC with voltage suppressor that uses an NMOS
More informationSGM Channel, 6th-Order Video Filter Driver for SD/HD
PRODUCT DESCRIPTION The SGM9346 video filter is intended to replace passive LC filters and drivers with an integrated device. Six 6th-order Butterworth filters provide improved image quality compared to
More informationASI. Switched-Capacitor Boost Converter 3.3V-5.0V 100mA GENERAL DESCRIPTION FEATURES APPLICATIONS
ASI Technical Data Sheet Switched-Capacitor Boost Converter 3.3V-5.0V 100mA FEATURES Switched-Capacitor Step-Up Operation Input Range: 2.7V to 5.0V Output Voltage: 3.3V-5.0V (programmable) Output Current:
More informationMP5013A 5 V, 5 A Programmable Current-Limit Switch with Over-Voltage Clamp and Slew-Rate Control in TSOT23-8
The Future of Analog IC Technology MP5013A 5 V, 5 A Programmable Current-Limit Switch with Over-Voltage Clamp and Slew-Rate Control in TSOT23-8 DESCRIPTION The MP5013A is a protection device designed to
More informationHigh-Current Overvoltage Protectors with Adjustable OVLO APL3228 OVLO EN GND
High-Current Overvoltage Protectors with Adjustable OVLO Features Wide supply voltage range from 3.8V to 28V Low ON resistance: 50mW(typ) at a supply voltage of 5V Flexible overvoltage-protection trip
More informationUM3221E/UM3222E/UM3232E
General Description UM3221E/UM3222E/UM3232E Fail-Safe, Single Supply RS-232 Transceivers UM3221E/UM3222E/UM3232E The UM3221E/UM3222E/UM3232E series are 3.3V powered RS-232 transceivers intended for portable
More informationSN8200 LI+ DUAL BATTERY CONTROLLER
LI+ DUAL BATTERY CONTROLLER GENERAL DESCRIPTION The SN8200 is a highly integrated IC to serve as the control logic for a system with multiple power sources. It integrates a mini-charger s path power MOS
More informationMP5013E 5V, 2A, Programmable Current- Limit Switch with Over-Voltage Clamp and Slew Rate Control in a TSOT23-8
MP5013E 5V, 2A, Programmable Current- Limit Switch with Over-Voltage Clamp and Slew Rate Control in a TSOT23-8 DESCRIPTION The MP5013E is a protection device designed to protect circuitry on the output
More informationMaximum Power Dissipation 0.67W Operating Temperature Range 40 C to 85 C Storage Temperature Range 55 C to 150 C
Description The ACE345E is a load switch which provides full protection to systems and loads which may encounter large current conditions. ACE345E offers a 95mΩ current-limited switch which can operate
More information4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source
4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source FEATURES DESCRITION Ultra low dropout: 50mV/20mA(typical) Support up to 4 LEDs LED sink current up to 20mA ±1% LED current matching(typical)
More informationUNISONIC TECHNOLOGIES CO., LTD LC1126 Preliminary LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD LC1126 Preliminary LINEAR INTEGRATED CIRCUIT ULTRA LOW OUTPUT VOLTAGE LINEAR N-FET CONTROLLER DESCRIPTION The UTC LC1126 is an ultra low output voltage linear N-FET controller
More informationRT mA 5-Channel Charge Pump White LED Driver with Low Dropout Current Source. Features. General Description. Applications. Pin Configurations
General Description The RT9365 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing an x1/x1.5
More informationAOZ8236. Five-Line TVS Diode Array. General Description
Five-Line TVS Diode Array General Description The AOZ823 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art device
More informationNCP392A. Adjustable Front End Overvoltage Protection Controller with Protected Vbus Output
Adjustable Front End Overvoltage Protection Controller with Protected Vbus Output The NCP392A is an overvoltage front end protection and be able to disconnect the systems from its output pin in case wrong
More informationDescription. 0.1uF FLG1 FLG2 OUT2 EN1 EN2 GND
Features Description Dual USB port power switches Over-current and thermal protection 2.1A accurate current limiting Reverse Current Blocking 90mΩ on-resistance Input voltage range: 2.7V 5.5V 0.6ms typical
More informationAOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
More informationDescription. 0.1uF FLG1 FLG2 OUT2 EN1 EN2 GND
Features Description Dual USB port power switches Over-current and thermal protection 0.8A accurate current limiting Reverse Current Blocking 90mΩ on-resistance Input voltage range: 2.7V 5.5V 0.6ms typical
More informationAOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge
More informationAOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
More informationSGM2019 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The SGM219 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSGM mA, Ultra Low Dropout, Low Power, RF Linear Regulators
GENERAL DESCRIPTION The is a low-power, low-noise, low-dropout, CMOS linear voltage regulator that operates from a 2.5V to 5.5V input voltage. It is the perfect choice for low voltage, low power applications.
More informationMIC2544A/2548A. General Description. Features. Applications. Typical Application. Programmable Current Limit High-Side Switch
Programmable Current Limit High-Side Switch General Description The MIC2544A and MIC2548A are integrated, high-side power switches optimized for low loss DC power switching and other power management applications,
More informationAP2141/ AP2151. Description. Pin Assignments. Features. Applications 0.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH AP2141/ AP2151
0.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH Description The AP2141 and AP2151 are integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. This
More informationPrecision, Ultra-Fast, Low Supply Current, Bidirectional Overvoltage Protector
General Description The overvoltage-protection (OVP) devices guard battery-powered modules in portable devices against overvoltage faults. The low 15mΩ (typ) on-resistance, as well as the low 13µA (typ)
More informationAOZ8234. Four-line TVS Diode
AOZ8 Four-line TS Diode General Description The AOZ8 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and ESD. This state-of-the-art device utilizes
More informationAOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
More informationP8803 Quad Low-Side Driver IC
Quad Low-Side Driver IC Description The provides a 4-channel low side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used
More informationPI5USB2549 USB Charging Port Controller and Load Detection Power Switch
Features Supports DCP Modes per USB Battery Charging Specification 1.2 Supports Shorted Mode per Chinese Telecommunication Industry Standard YD/T1591-2009 Supports non-bc1.2 Charging Modes by Automatic
More informationNCP392D. Adjustable Front End Overvoltage Protection Controller with Protected Vbus Output
Adjustable Front End Overvoltage Protection Controller with Protected Vbus Output The NCP392D is an overvoltage front end protection controller and is able to disconnect the systems from its output pin
More informationHM9708 HM9708. Battery-Powered Equipment Motherboard USB Power Switch USB Device Power Switch Hot-Plug Power Supplies Battery-Charger Circuits DC+ VIN
200mΩ Power Distribution Switches Features 200mΩ Typ. High-Side MOSFET 0.8A Current Limit (V IN =3.0V) Wide Input Voltage Range: 2V ~ 5.5V Soft Start Thermal Protection Small SOT-23-5 Package Minimizes
More informationAQ1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protection - SP003 AQ003 Series AQ003 Series - 30pF 30kV Unidirectional Discrete TVS RoHS Pb GREEN Description This diode is fabricated in a proprietary silicon avalanche technology
More informationDIO5151B 700mA/1A Buck/Boost Charge Pump LED Driver
Rev 0.1 Features Output Current : DIO5151BED8: 700mA DIO5151BCD10: 1A Up to 90% Efficiency in Torch Mode Adjustable FLASH Mode Current 1 and 2 Automatic Modes for High Efficiency Input Voltage Range: 3V
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationRClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationAIC A Dual USB High-Side Power Switch FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT
1.0A Dual USB High-Side Power Switch FEATURES 2.7V to 6.5V Input Voltage Range 1.0A Dual Continuous Load Current 100mΩ High-Side P-MOSFET Switch 20Ω Open-Drain Over-Current Flag Output 80uA Quiescent Supply
More informationSP1050 Series for Power-over-Ethernet PSE Protection
SP1050 Series for Power-over-Ethernet PSE Protection RoHS Pb GREEN Description The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package.
More information3.5A 12V E-Fuse with Hot-Swap and Voltage Surge Protection
Datasheet LX8204 3.5A 12V E-Fuse with Hot-Swap and Voltage Surge Protection Description The LX8204 is a fast acting efuse switch designed both to protect circuitry connected to its output (VOUT) from transient
More informationIS31BL3231. FLASH LED DRIVER July 2015
FLASH LED DRIVER July 2015 GENERAL DESCRIPTION The IS31BL3231 is a current-regulated charge pump and ideal for powering high brightness LEDs for camera flash and torch applications. The charge pump can
More informationTVS Diode Arrays (SPA Diodes)
SP1005 Series 30pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1005 includes back-to-back Zener diodes fabricated in a proprietary silicon avalanche technology to provide protection
More informationAOZ8251. One-line Bidirectional TVS Diode. Features. General Description. Applications. Signal Line
One-line Bidirectional TVS Diode General Description The AOZ8251 is a one-line bidirectional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics
More informationYB1300S Switched Capacitor Boost Converter 5V/4.5V
Description The YB1300S is a switched capacitor DC/DC boost converter that produces a regulated 5V output. The input voltage range is from 2.7V to 5.0V that makes the YB1300S ideally for a single cell
More informationAOZ Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TS Diode General Description The -03 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2.0, USB 3.1, MDDI, SATA, and Gigabit thernet
More informationMP5007 5V, 1A- 5A Programmable Current Limit Switch
The Future of Analog IC Technology DESCRIPTION The MP5007 is a protection device designed to protect circuitry on the output (source) from transients on input (V CC ). It also protects V CC from undesired
More informationType Version Ordering Code Package PEB 2025-N V 1.5 Q67100-H6300 P-LCC-28-R (SMD) PEB 2025-P V 1.5 Q67100-H6241 P-DIP-22
ISDN Exchange Power Controller (IEPC) PEB 2025 CMOS IC Features Supplies power to up to four transmission lines CCITT recommendations compatible for power feed at the S interface Each line is individually
More informationSP pF 8kV DFN Plastic Unidirectional Discrete TVS
SP1053 8.5pF 8kV 01005 DFN Plastic Unidirectional Discrete TVS RoHS Pb GREEN Description Avalanche breakdown diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide
More informationHigh Current Power Switch
SP619 High Current Power Switch FEATURES Max RDS(ON).377 Ohms Overcurrent deactivation 800mA Max leakage current less than 2µA while deactivated Small 6 pin SOT-23 package Built-in Over-temperature Protection
More informationAP2161D/AP2171D. Pin Assignments. Description. Features. Applications 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE
Green 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE Description Pin Assignments The AP2161D and AP2171D are integrated high-side power switches optimized for Universal Serial Bus
More informationSTBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications
800 ma standalone linear Li-Ion battery charger with thermal regulation Description Datasheet - production data Features Programmable charge current up to 800 ma No external MOSFET, sense resistors or
More informationAIC1526. Dual USB High-Side Power Switch FEATURES DESCRIPTION APPLICATIONS
Dual USB High-Side Power Switch FEATURES 110mΩ (5V Input) High-Side MOSFET Switch. 500mA Continuous Load Current per Channel. 110µA Typical On-State Supply Current. 1µA Typical Off-State Supply Current.
More informationFAN3989 USB/Charger Detection Device with Load Switch
FAN3989 USB/Charger Detection Device with Load Switch Features Charger/USB Detection Device with Load Switch Charger/USB Device Detection Flag Over/Under-Voltage Detection Flag Load Switch Output, Up to
More informationSTEF12E. Electronic fuse for 12 V line. Datasheet. Features. Applications. Description
Datasheet Electronic fuse for 12 V line Features DFN10 (3x3 mm) Continuous current typ. 3.6 A N-channel on-resistance typ. 45 mω Enable/fault functions Output clamp voltage typ. 15 V Undervoltage lockout
More informationRClamp0501T. Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationApplications +5V V CC V S EN SYNCH0, SYNCV0 SDA0, SCL0 RED SYNCH1, SYNCV1 SDA1, SCL1 MAX14895E BLU GND
19-5819; Rev ; 3/11 E V A L U A T I O N K I T A V A I L A B L E MAX14895E General Description The MAX14895E integrates level-translating buffers and features RED, GRN, and BLU (RGB) port protection for
More information4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
More informationSP1124T Discrete Unidirectional TVS Diode
SP1124T Discrete Unidirectional TVS Diode RoHS Pb GREEN Description This TVS diode is fabricated in a proprietary silicon avalanche technology and is used for high level protection of electronic equipment
More informationAOZ8204. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80 Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art device
More information2 AA Cell to 3.3V USB On-The-Go Devices White LED Drivers Handheld Devices. The HM3200B is available in the 6-pin SOT23-6.
Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 3.3V ± 4% Output VIN Range: 1.8V to 5V Output Current: 100mA Constant Frequency Operation at All Loads Low Noise Constant Frequency (1.2MHz)
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD MICROPROCESSOR IC DESCRIPTION The UTC UTC812 is a microprocessor (µp) reset circuit designed to monitor the power supplies in µp and digital systems. The UTC UTC812 has push-pull
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationVCC 1 GND. Environmental. Pb-Free Halogen Free. V D = 20V Max* 5V 3.3V G1/G2 PG 8 DIS2 3
Not for Distribution Features 5V Power supply Drain Voltage Range 1.0V to 20V Internal Gate Voltage Charge Pump Controlled Load Discharge Rate Controlled Turn on Slew Rate TDFN-8 Package Application Functions
More informationAOZ8204DI. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80DI Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM3525 Single Port USB Power Switch and Over-Current Protection General
More information